Released LibGTop 1.0.11 "Jasmin".

2001-02-15 Martin Baulig <baulig@suse.de> Released LibGTop 1.0.11 "Jasmin".
2001-02-15 01:40:58 +00:00 · 2001-02-15 01:20:08 +00:00 · 2001-02-15 01:19:36 +00:00 · 2001-02-15 00:29:30 +00:00 · 2001-02-14 23:56:16 +00:00 · 2001-02-14 23:50:32 +00:00
531 changed files with 63392 additions and 20078 deletions
--- a/.cvsignore
+++ b/.cvsignore
@@ -5,6 +5,8 @@ config.cache
 config.h
 config.h.in
 config.log
+config.sub
+config.guess
 config.status
 configure
 gtopConf.sh
@@ -25,3 +27,10 @@ support
 i386-freebsd
 alpha-dec-osf3.0
 i686-pc-linux-gnu-linux
+libgtop-config
+ABOUT-NLS
+libgtop.spec
+libgtop-0.99.*.tar.gz
+libgtop-0.99.*
+*-debstamp
+libgtop-1.*.*.tar.gz
--- a/225
+++ b/225
@@ -1,225 +0,0 @@
-Notes on the Free Translation Project
-*************************************
-
-   Free software is going international!  The Free Translation Project
-is a way to get maintainers of free software, translators, and users all
-together, so that will gradually become able to speak many languages.
-A few packages already provide translations for their messages.
-
-   If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site.  But you do *not*
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
-   Installers will find here some useful hints.  These notes also
-explain how users should proceed for getting the programs to use the
-available translations.  They tell how people wanting to contribute and
-work at translations should contact the appropriate team.
-
-   When reporting bugs in the `intl/' directory or bugs which may be
-related to internationalization, you should tell about the version of
-`gettext' which is used.  The information can be found in the
-`intl/VERSION' file, in internationalized packages.
-
-One advise in advance
-=====================
-
-   If you want to exploit the full power of internationalization, you
-should configure it using
-
-     ./configure --with-included-gettext
-
-to force usage of internationalizing routines provided within this
-package, despite the existence of internationalizing capabilities in the
-operating system where this package is being installed.  So far, only
-the `gettext' implementation in the GNU C library version 2 provides as
-many features (such as locale alias or message inheritance) as the
-implementation here.  It is also not possible to offer this additional
-functionality on top of a `catgets' implementation.  Future versions of
-GNU `gettext' will very likely convey even more functionality.  So it
-might be a good idea to change to GNU `gettext' as soon as possible.
-
-   So you need not provide this option if you are using GNU libc 2 or
-you have installed a recent copy of the GNU gettext package with the
-included `libintl'.
-
-INSTALL Matters
-===============
-
-   Some packages are "localizable" when properly installed; the
-programs they contain can be made to speak your own native language.
-Most such packages use GNU `gettext'.  Other packages have their own
-ways to internationalization, predating GNU `gettext'.
-
-   By default, this package will be installed to allow translation of
-messages.  It will automatically detect whether the system provides
-usable `catgets' (if using this is selected by the installer) or
-`gettext' functions.  If neither is available, the GNU `gettext' own
-library will be used.  This library is wholly contained within this
-package, usually in the `intl/' subdirectory, so prior installation of
-the GNU `gettext' package is *not* required.  Installers may use
-special options at configuration time for changing the default
-behaviour.  The commands:
-
-     ./configure --with-included-gettext
-     ./configure --with-catgets
-     ./configure --disable-nls
-
-will respectively bypass any pre-existing `catgets' or `gettext' to use
-the internationalizing routines provided within this package, enable
-the use of the `catgets' functions (if found on the locale system), or
-else, *totally* disable translation of messages.
-
-   When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl.a' file and
-will decide to use this.  This might be not what is desirable.  You
-should use the more recent version of the GNU `gettext' library.  I.e.
-if the file `intl/VERSION' shows that the library which comes with this
-package is more recent, you should use
-
-     ./configure --with-included-gettext
-
-to prevent auto-detection.
-
-   By default the configuration process will not test for the `catgets'
-function and therefore they will not be used.  The reasons are already
-given above: the emulation on top of `catgets' cannot provide all the
-extensions provided by the GNU `gettext' library.  If you nevertheless
-want to use the `catgets' functions use
-
-     ./configure --with-catgets
-
-to enable the test for `catgets' (this causes no harm if `catgets' is
-not available on your system).  If you really select this option we
-would like to hear about the reasons because we cannot think of any
-good one ourself.
-
-   Internationalized packages have usually many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language.  Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package.  However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-Using This Package
-==================
-
-   As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-ISO 639 `LL' two-letter code prior to using the programs in the
-package.  For example, let's suppose that you speak German.  At the
-shell prompt, merely execute `setenv LANG de' (in `csh'),
-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash').  This
-can be done from your `.login' or `.profile' file, once and for all.
-
-   An operating system might already offer message localization for
-many of its programs, while other programs have been installed locally
-with the full capabilities of GNU `gettext'.  Just using `gettext'
-extended syntax for `LANG' would break proper localization of already
-available operating system programs.  In this case, users should set
-both `LANGUAGE' and `LANG' variables in their environment, as programs
-using GNU `gettext' give preference to `LANGUAGE'.  For example, some
-Swedish users would rather read translations in German than English for
-when Swedish is not available.  This is easily accomplished by setting
-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
-
-Translating Teams
-=================
-
-   For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list, courtesy of Linux
-International.  You may reach your translation team at the address
-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
-language.  Language codes are *not* the same as the country codes given
-in ISO 3166.  The following translation teams exist, as of August 1997:
-
-     Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
-     Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
-     `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
-     Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
-     `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
-     Swedish `sv', and Turkish `tr'.
-
-For example, you may reach the Chinese translation team by writing to
-`zh@li.org'.
-
-   If you'd like to volunteer to *work* at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is *not* the same as the list itself, it has
-`-request' appended.  For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
-     subscribe
-
-   Keep in mind that team members are expected to participate
-*actively* in translations, or at solving translational difficulties,
-rather than merely lurking around.  If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `translation@iro.umontreal.ca' to reach the
-coordinator for all translator teams.
-
-   The English team is special.  It works at improving and uniformizing
-the terminology in use.  Proven linguistic skill are praised more than
-programming skill, here.
-
-Available Packages
-==================
-
-   Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of August
-1997.  The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination.
-
-     Ready PO files    cs da de en es fi fr it ja ko nl no pl pt sl sv
-                     .-------------------------------------------------.
-     bash            |       []          []          []                |  3
-     bison           |       []          []          []                |  3
-     clisp           |       [] [] []    []                            |  4
-     cpio            |       []    []    []          []    []          |  5
-     diffutils       |       []    []    []                []       [] |  5
-     enscript        |       []    [] [] []          []          []    |  6
-     fileutils       | []    []    []    []       [] []    [] [] [] [] | 10
-     findutils       |       []    []    [] []    [] []    []       [] |  8
-     flex            |             []    []       []                [] |  4
-     gcal            |       []          []          []    []       [] |  5
-     gettext         |       []    []    []       [] [] [] [] [] [] [] | 11
-     grep            |       []    []    []       [] [] [] []    [] [] |  9
-     hello           |       []    []    []       [] [] [] [] [] [] [] | 10
-     id-utils        |       []          []                []          |  3
-     indent          |    [] []                   []       []          |  4
-     libc            |       []    []    []       [] []    []       [] |  7
-     m4              |       []          []    []    []             [] |  5
-     make            |       []    []    []       [] []    []          |  6
-     music           |                   []                []          |  2
-     ptx             |       []    []    []          [] [] [] []    [] |  8
-     recode          |    [] []    []    []          []    [] [] [] [] |  9
-     sh-utils        |       []          []          [] [] [] []    [] |  7
-     sharutils       |       []    []    []          []             [] |  5
-     tar             |       []          [] []    [] [] [] [] [] [] [] | 10
-     texinfo         |                   []                            |  1
-     textutils       | []    []    []    []       [] [] [] []       [] |  9
-     wdiff           | []    []    []    []          [] [] []       [] |  8
-                     `-------------------------------------------------'
-       16 languages    cs da de en es fi fr it ja ko nl no pl pt sl sv
-       27 packages      3  2 24  1 17  1 26  2  1 11 20  9 19  7  7 17  167
-
-   Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect.  This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
-   For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer.  There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
-   If August 1997 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites.
-
--- a/95
+++ b/95
@@ -1,95 +0,0 @@
-Hi all,
-
-I just uploaded the first working draft alpha version 0.01 to my website:
-
-  http://www.home-of-linux.org/gnome/libgtop/
-
-Libgtop is a library that fetches information about the running system such as cpu and
-memory usage, active processes etc. On Linux systems, these information are taken directly
-from the /proc filesystem. For other systems such as Solaris, where such programs need to be
-suid root (or only setgid kmem/mem on some systems), it provides a suid/setgid server that
-fetches those information and a client-side library that talks to this server. Main idea
-was to have the same interface for all operating systems, thus all system dependent details
-are hidden in the implementation of that server.
-
-Currently, it only works for Linux, documentation on how to port it to other systems is on
-the way. I'm planning to keep this site an up-to-date mirror of my local machine (which is
-connected to the internet over some expensive dialup connection, so I'll upload it about
-once every day I made significant changes) so that you can always find the latest version
-of the software here.
-
-I've written a simple guile interface for the library to show which information it can
-already fetch. See examples/third for details.
-
-===========================================================================================
-
-#include <glibtop.h>
-#include <glibtop/open.h>
-#include <glibtop/close.h>
-
-#include <glibtop/cpu.h>
-
-int
-main (int argc, char *argv [])
-{
-        glibtop server;
-        glibtop_cpu cpu;
-        unsigned i, *ptr;
-
-        setlocale (LC_ALL, "");
-        bindtextdomain (PACKAGE, GTOPLOCALEDIR);
-        textdomain (PACKAGE);
-
-        glibtop_open (&server, argv [0]);
-
-        glibtop_get_cpu (&server, &cpu);
-
-        fprintf (stderr, "CPU: %lu, %lu, %lu, %lu, %lu\n",
-                 cpu.total, cpu.user, cpu.nice, cpu.sys, cpu.idle);
-
-        glibtop_close (&server);
-
-        exit (0);
-}
-
-===========================================================================================
-
-The following scheme code is used in examples/third to show all information that is
-currently available:
-
-        (display (get-cpu)) (newline)
-        (display (get-mem)) (newline)
-        (display (get-swap)) (newline)
-        (display (get-uptime)) (newline)
-        (display (get-loadavg)) (newline)
-        (display (get-shm_limits)) (newline)
-        (display (get-msg_limits)) (newline)
-        (display (get-sem_limits)) (newline)
-        (display (get-sysdeps)) (newline)
-        (display (get-proclist)) (newline)
-
-On my system, this yields:
-
-(3796245 348706 66 89999 3357474)
-(31715328 31354880 360448 13385728 401408 7237632 17567744)
-(133885952 42160128 91725824)
-(37962.49 33574.74)
-(0.01 0.02 0.0)
-(33554432 1 128 128 4194304)
-(2048 16384 4056 16384 128 16 16384)
-(4096 128 4096 4096 32 32 32 20 32767 16383)
-(31 127 7 3 1 31 127 1023 3)
-(71 4 284 1 2 3 246 247 210 8 48 81 83 153 157 167 170 171 172 173 174 175 178 181 195 191 200 203 207 248 215 216 217 220 222 227 245 249 250 251 253 254 315 267 331 373 338 334 335 345 337 372 374 342 343 344 375 14445 13119 6438 14555 13118 13801 6439 17362 18411 18455 6521 6522 6523 23979 23980 7905 7906)
-
-===========================================================================================
-
-Better documentation is on the way! There's still a little bit under the URL above.
-
-Enjoy it!
-
-Martin <martin@home-of-linux.org>
-
-
-
-
-
--- a/2
+++ b/2
@@ -1,2 +1,2 @@
 Martin Baulig (martin@home-of-linux.org)
-Josh Sled <jsled@scam.XCF.Berkeley.EDU>
+Drazen Kacar (dave@srce.hr)
--- a/690
+++ b/690
@@ -1,3 +1,693 @@
+2001-02-15  Martin Baulig  <baulig@suse.de>
+
+	Released LibGTop 1.0.11 "Jasmin".
+
+	* NEWS: Added news entry for 1.0.11.
+
+2001-02-14  Martin Baulig  <baulig@suse.de>
+
+	Merged from LIBGTOP_1_1_2_PATCHES.
+
+	* libgtop-sysdeps.m4 (GLIBTOP_SOLARIS_RELEASE): Define this on Solaris;
+	we use version codes like 270 for SunOS 5.7 and 251 for SunOS 2.5.1.
+
+	* LIBGTOP-VERSION (LIBGTOP_VERSION_SUFFIX): Added this so you can
+	have your tarballs called `libgtop-1.x.y-snap.tar.gz' or whatever.
+	This only affects the `VERSION' variable and thus how the resulting
+	tarball will be called, but not `LIBGTOP_VERSION_CODE' etc.
+
+	* configure.in, acconfig.h: Added checks for <procfs.h>
+	and <sys/procfs.h>
+
+	* configure.in (DL_LIB): Check for dlopen() and AC_SUBST this.
+
+	* Makefile.am: Make `aclocal.m4' also depend on `LIBGTOP-VERSION'
+	when in maintainer-mode.
+
+2001-02-14  Martin Baulig  <baulig@suse.de>
+
+	* include/glibtop/limits.h: Removed; this file doesn't exist
+	in the stable branch.
+
+2001-02-13  Martin Baulig  <baulig@suse.de>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.11, binary age 10,
+	interface age 10.
+
+2001-02-13  Stanislav Visnovsky  <visnovsky@nenya.ms.mff.cuni.cz>
+
+	* configure.in: Added sk to ALL_LINGUAS
+
+2001-02-08  Gustavo Maciel Dias Vieira  <gdvieira@zaz.com.br>
+
+	* configure.in (ALL_LINGUAS): Added pt_BR to ALL_LINGUAS.
+
+2000-11-21  Martin Baulig  <baulig@suse.de>
+
+	* libgtop-config.h.in: Added `--cflags', `--libs' and `--extra-libs'
+	parameters.
+
+2000-11-20  Martin Baulig  <baulig@suse.de>
+
+	Released LibGTop 1.0.10 "November Rain".
+
+	* LIBGTOP-VERSION: Set version number to 1.0.10, binary age 9,
+	interface age 9.
+
+2000-05-25  Martin Baulig  <baulig@suse.de>
+
+	Released LibGTop 1.0.9 "Stuttgart".
+
+	* LIBGTOP-VERSION: Set version number to 1.0.9 binary age 8,
+	interface age 8.
+
+	(LibGTop 1.0.8 "Frankfurt" was not publically released.)
+
+2000-02-20  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.8 binary age 7,
+	interface age 7.
+
+2000-02-15  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.7 "Copenhagen".
+
+1999-10-19  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.7 binary age 6,
+	interface age 6.
+
+1999-10-18  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.6 "October LibGTop".
+
+1999-10-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* NEWS.old: Removed obsolete file.
+
+	* RELNOTES-1.0.x: Added release notes for LibGTop 1.0.6.
+
+	* TODO: Removed obsolete file.
+
+	* NEWS: We start maintaining a NEWS file now :)
+
+1999-10-16  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.6 binary age 5,
+	interface age 5.
+
+1999-10-09  Jesus Bravo Alvarez  <jba@pobox.com>
+
+	* configure.in (ALL_LINGUAS): Added Galician (gl)
+
+1999-09-29  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.5.
+
+1999-09-29  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (libgtop_top_builddir): AC_SUBST this.
+
+1999-09-24  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.5 binary age 4,
+	interface age 4.
+
+1999-09-24  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.4.
+
+1999-09-22  Kjartan Maraas  <kmaraas@online.no>
+
+	* configure.in: Added "da" to ALL_LINGUAS.
+	
+1999-09-19  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtopConf.sh.in: Added MODULE_VERSION on Miguel's
+	request (set it to "libgtop-@LIBGTOP_VERSION@").
+
+1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
+
+	* configure.in, po/*.po: merged *.po files from HEAD CVS
+
+1999-09-17  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Make it work if we have GNOME and the user
+	gave use --without-gnome (fixes bug #1735).
+
+1999-09-17  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.4 binary age 3,
+	interface age 3.
+
+1999-09-16  Martin Baulig  <martin@home-of-linux.org>
+
+	Merged everything since May 31 from HEAD and released
+ 	LibGTop 1.0.3.
+
+1999-07-29  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/error.h: Use G_GNUC_UNUSED.
+
+	* configure.in (ENABLE_STATIC, ENABLE_SHARED): New automake
+	conditionals.
+
+1999-07-11  Tomas Ogren  <stric@ing.umu.se>
+
+	* configure.in: Added sv to ALL_LINGUAS
+
+1999-07-11  Tomas Ogren  <stric@ing.umu.se>
+
+	* sysdeps/names/procmem.c: Fixed a tyop
+
+1999-05-31  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 1.0.3 binary age 2,
+	interface age 2.
+
+1999-05-31  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.2.
+
+1999-05-26  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (INCLUDES): Define `LIBGTOP_VERSION_CODE' here so we
+	can use version conditionals in the sysdeps code.
+
+1999-05-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtop-sysdeps.m4: Make the I4B check work for NetBSD.
+
+1999-05-16  Martin Baulig  <martin@home-of-linux.org>
+
+	* doc: Merged the LibGTop Manual from the HEAD.
+
+1999-03-01  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.1.
+
+	* LIBGTOP-VERSION: Set version number to 1.0.1 binary age 0,
+	interface age 0.
+
+1999-03-01  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (LIBGTOP_LIBS): Move `-lgtop_common' last to
+	make it work with static-only libs. Thanks to Roderik Muit
+	for pointing this out.
+	(PERL): First check for `perl5', then for `perl'. Thanks again
+	to Roderik Muit.
+
+1999-02-24  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 1.0.0.
+
+	* LIBGTOP-VERSION: Set version number to 1.0.0 binary age 0,
+	interface age 0.
+
+	* configure.in: Require GLIB >= 1.2.0.
+
+1999-02-23  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.100.0.
+
+	Make the copyright of LibGTop be the GNU General Public License.
+
+	* LIBGTOP-VERSION: Set version number to 0.100.0 binary age 0,
+	interface age 0.
+
+	* copyright.txt: Set the year to 1998-99 and pretty-format it a
+	little bit. Same in all C source and header files.
+
+1999-02-21  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (LIBGTOP_*_INCS): Define `HAVE_GLIBTOP_MACHINE_H'
+	if appropriate.
+
+1999-02-19  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.99.9.
+
+	* LIBGTOP-VERSION: Set version number to 0.99.9 binary age 0,
+	interface age 0.
+
+	* include/glibtop/error.h: Don't include <glib.h>.
+	* sysdeps/common/error.c: Use `int' not `gint'.
+
+	* misc/porting-libgtop.txt: Added a few instructions on how
+	to port LibGTop to Solaris.
+
+	* Replace all __BEGIN_DELCS with LIBGTOP_BEGIN_DECLS and all
+	__END_DECLS with LIBGTOP_END_DECLS; remove all __P macros and
+	use real function prototypes.
+
+1999-02-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/*.h: Use glib-like function prototypes
+	instead of "extern <function> __P((args))".
+
+	* sysdeps/common/error.h: Replaced inline with static.
+
+1999-02-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* */*.awk: Replaced all awk scripts with perl scripts since it is
+	more likely that people have a working perl interpreter than GNU
+	awk on their system.
+
+1999-02-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* sysdeps/common/error.c (glibtop_error_r, glibtop_warn_r): Define
+	them as G_INLINE_FUNC in <glibtop/errno.h> if possible.
+	(glibtop_error_io_r, glibtop_warn_io_r): Likewise.
+	(glibtop_error_vr, glibtop_warn_vr): New functions taking a va_list.
+	(glibtop_error_io_vr, glibtop_warn_io_vr): New functions taking an
+	errno an a va_list.
+
+1999-02-17  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.99.8.
+
+1999-02-16  Martin Baulig  <martin@home-of-linux.org>
+
+	* examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am,
+	  sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am,
+	  sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am,
+	  sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am,
+	  sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am,
+	  sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am:
+	Initialize INCLUDES to `@INCLUDES@' to make it clear that it is
+	set in configure.in. It is ok to add things there, but you must
+	not remove the `@INCLUDES@'.
+
+1999-02-15  Jeff Garzik  <jgarzik@pobox.com>
+
+	* examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am,
+	  sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am,
+	  sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am,
+	  sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am,
+	  sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am,
+	  sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am:
+	Removed hardcoded gcc arguments from CFLAGS.
+
+	* include/glibtop/error.h:
+	Added FIXME comment about varargs macros breaking Sun cc
+	compilation.
+
+1999-02-12  Martin Baulig  <martin@home-of-linux.org>
+
+	Thanks to Frederic Devernay for pointing out that we need to define
+	__BEGIN_DECLS and __END_DECLS when not using GNOME.
+
+	* configure.in: Define `WITHOUT_GNOME' if appropriate.
+
+	* include/glibtop/global.h: Define __BEGIN_DECLS and __END_DECLS
+	when WITHOUT_GNOME not when _IN_LIBGTOP.
+
+1999-02-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/global.h: Applied patch from Frederic Devernay;
+	__BEGIN_DECLS and __END_DECLS are only defined inside _IN_LIBGTOP.
+
+1999-02-10  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (program_invocation_name): Check whether we need
+ 	to declare this; some libc5 systems define that symbol but do
+	not declare it in any header file.
+
+1999-02-10  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtop.spec.in, libgtop.spec: Replaced libgtop.spec with
+	with libgtop.spec.in, so libgtop.spec is now a generated file.
+
+1999-02-05  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/global.h: Enclose some of the stuff in this
+	file in `#ifdef _IN_LIBGTOP'.
+
+1999-02-04  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/global.h (_): Use dgettext (), not gettext ().
+
+1999-01-23  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtopConf.sh.in (LIBGTOP_DATADIR): New variable.
+
+1999-01-06  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtop-sysdeps.m4: Always enable SMP support for Linux.
+
+1999-01-03  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.99.2.
+
+1999-01-05  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtop.spec: Always build SMP support; binary packages should
+	contain all possible features.
+
+	* configure.in: LibGTop will now require GLIB >= 1.1.12.
+	
+1999-01-05  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Make it abort if the `dc' utility is not installed.
+
+1999-01-03  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.99.1.
+
+1998-12-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (LIBGTOP_INCS): Define `HAVE_LIBGTOP_SMP' if SMP
+	support was enabled.
+
+1998-12-22  Yukihiro Nakai  <Nakai@TokyoNet.AD.JP>
+
+	* configure.in (ALL_LINGUAS): Added `ja'.
+
+1998-12-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* Makefile.am: Applied patch from Edward Jason Riedy to use '#'
+	as separator in sed commands.
+
+1998-12-15  Martin Baulig  <martin@home-of-linux.org>
+
+	Released LibGTop 0.99.0 which is a feature-freezed version
+	for GNOME 1.0.
+
+1998-12-09  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: We need to define LIBSUPPORT and SUPPORTINCS under
+	all circumstances as it is in gnome-libs.
+
+	* include/glibtop/procargs.h (glibtop_get_proc_args): Make the
+	return value a `char *' instead of a `const char *'.
+
+1998-12-09  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 0.29.1.
+
+1998-12-09  Martin Baulig  <martin@home-of-linux.org>
+
+	* libgtop-sysdeps.m4: Moved here from the macros directory,
+	formerly known as `macros/gnome-libgtop-sysdeps.m4'.
+	(--enable-hacker-mode): New command line parameter to configure,
+	enables building of unstable sysdeps directories.
+	(LIBGTOP_HACKER_TESTS): New macro to check for unsafe things when
+	hacker mode was enabled.
+
+1998-12-06  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Make it abort if GNOME cannot be found and
+	the --without-gnome parameter was not given.
+
+1998-12-03  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Pipe the expression
+	through `dc' so we get a real number.
+
+1998-12-03  Martin Baulig  <martin@home-of-linux.org>
+
+	LibGTop now requires gettext >= 0.10.35.
+
+	* intl: Removed &intl CVS alias.
+
+1998-11-27  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION: Set version number to 0.29.0.
+
+	* TODO: Add things that need to be done before Dec 15.
+
+	This is basically a feature freeze for the C language part
+	of LibGTop except for things that are marked with (***) in
+	the TODO.
+
+1998-11-20  Martin Baulig  <baulig@merkur.uni-trier.de>
+
+	* sysdeps/common/mountlist.c: Applied a patch from Kenneth Stailey to
+	make it work on OpenBSD.
+
+1998-11-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* lib/open.c (glibtop_open_l): We need to set argv[0] in call
+	to execl () to avoid a core dump in _init () on FreeBSD 3.0.
+
+1998-11-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/gnuserv.h (MCOOKIE_SCREEN): Don't define this
+	any longer, we now use the port the daemon is listening on instead
+	of a fixed screen.
+
+1998-11-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (--enable-debug): Define LIBGTOP_ENABLE_DEBUG
+	if this parameter is given.
+	(--enable-fatal-warnings): New parameter to make all warnings
+	fatal; define `LIBGTOP_FATAL_WARNINGS' if given.
+
+	* sysdeps/common/error.c (glibtop_error_r): Use abort () instead
+	of exit () if LIBGTOP_ENABLE_DEBUG.
+	(glibtop_error_io_r): Likewise.
+	(glibtop_warn_r): Call abort () if LIBGTOP_FATAL_WARNINGS.
+	(glibtop_warn_io_r): Likewise.
+
+	[NOTE: To get a core dump of the libgtop_server, you need to
+	remove all suid/sgid bits and invoke it as a priviledged user.]
+
+1998-11-08  Raja R Harinath  <harinath@cs.umn.edu>
+
+	* Makefile.am (support): Don't build if not BUILD_GNOME_SUPPORT.
+
+1998-11-02  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/parameter.h: Added `GLIBTOP_PARAM_REQUIRED'.
+
+	* lib/parameter.c (glibtop_set_parameter_l): It's no longer
+	allowed to set GLIBTOP_PARAM_FEATURES.
+	(glibtop_get_parameter_l): You can use `GLIBTOP_PARAM_REQUIRED'
+	to read server->required and ...
+	(glibtop_set_parameter_l): ... set it here.
+
+1998-10-26  Martin Baulig  <martin@home-of-linux.org>
+
+	Added `Network Load' feature (netload).
+
+	* include/glibtop/netload.h: New file.
+	* features.def: Added new feature `netload'.
+
+1998-10-26  Martin Baulig  <martin@home-of-linux.org>
+
+	Added `Command Line Parameters' feature (proc_args).
+
+	* include/glibtop/proc_args.h: New file.
+	* features.def: Added new feature `proc_args'.
+
+	* lib/lib.awk: New type `unsigned' for the features.def which
+	is `unsigned'.
+
+1998-10-25  Martin Baulig  <martin@home-of-linux.org>
+
+	Added PPP/ISDN support.
+
+	* include/glibtop/ppp.h: New file.
+	* features.def: Added new feature `ppp'.
+
+	* acconfig.h (HAVE_I4B): Defined if we have the I4B package.
+	(HAVE_I4B_ACCT): Defined if we have ISDN statistics with I4B.
+
+	* misc: New directory.
+	* misc/i4b_acct.txt: Read this file to get ISDN statistics on BSD.
+
+	* lib/lib.awk: New type `ushort' for the features.def which is
+	`unsigned short'.
+
+1998-10-20  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/proc_signal.h: Use a 2-element-array of
+	type `u_int64_t' for all signal masks instead of just
+	scalar numbers. This avoids problems on systems with more
+	than 64 signals.
+
+	If there is any operating system out there with even more than
+	128 signals, we can simply increase the number of array elements
+	here.
+
+	[NOTE for people porting libgtop:
+	
+ 	 Please use all 64 bits of the `u_int64_t' and not just 32 - the
+	 signal number (as it is used in calls to kill () ...) should be
+	 a bit-index into this field; if a process ignores for instance
+	 signal 64, it has the 0-bit of sigcatch[1] set, if it ignores 63,
+	 this is the 63-bit of sigcatch[0] and so on ...
+
+	 The mapping between signal numbers and their names is done via the
+	 glibtop_sys_siglist [] field which should be declared in
+	 sysdeps/@sysdeps_dir@/siglist.c - see linux for an example.
+	]
+
+	* features.def: It's now safe to put things like `loadavg[3]'
+	here - the awk skripts should correctly threat this as an array.
+
+1998-10-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (GNOME_COMPILE_WARNINGS): Let the user enable
+	compiler warnings.
+	(--with-libgtop-guile): Make the default to build the guile
+	interface if guile can be found.
+
+	* Makefile.am (confexec_DATA): Install `feature.def' as
+	`libgtop-features.def'.
+	* libgtop.spec: Added `%{prefix}/lib/*.def' to the file list.
+
+1998-10-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Don't create `guile/Makefile'.
+	* Makefile.am (DIST_SUBDIRS): Removed.
+	(SUBDIRS): Removed `guile'.
+
+	* include/glibtop/*.h: Removed external delarations of all
+	`glibtop_guile_*' functions that were formerly defined in
+	sysdeps/guile/guile.c and sysdeps/guile/names/guile-names.c.
+
+1998-10-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* sysdeps/guile/ChangeLog: New file.
+
+	* LIBGTOP-VERSION: Set version number to 0.26.3.
+	* libgtop.spec: Likewise.
+
+	* Makefile.am (confexec_DATA): Added `features.def'.
+	* libgtop-config.in: Added `--features-def-file' parameter
+	to get pathname of installed `features.def' file.
+
+	* perl: Removed everything in this subdirectory. This was
+	only experimental. The real perl bindings for LibGTop are
+	in the libgtop-bindings module.
+
+1998-10-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* src/inodedb/Makefile.am: Removed @libs_xauth@ and -lgdbm
+	from the _LDADD variables since libtool automatically gets
+	the dependencies.
+	* src/daemon/Makefile.am: Likewise.
+	* examples/Makefile.am: Likewise.
+
+1998-10-10  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure (LIBGTOP_EXTRA_LIBS): Added `GLIB_LIBS'.
+
+	* perl/ChangeLog: New file.
+
+1998-10-07  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in (ALL_LINGUAS): Added `de'.
+
+1998-10-03  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/global.h: Only include system header files
+	if we are `_IN_LIBGTOP'.
+	(G_GNUC_NORETURN, G_GNUC_CONST, G_GNUC_UNUSED): Added those
+	definitions if we are `_IN_LIBGTOP'.
+
+1998-09-29  Sung-Hyun Nam  <namsh@lgic.co.kr>
+
+	* configure.in (ALL_LINGUAS): add `ko'
+	* po/ko.po: new file.
+
+1998-09-27  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Make it really *require* GLIB >= 1.1.3.
+
+1998-09-27  Raja R Harinath  <harinath@cs.umn.edu>
+
+	* configure.in: Move check for `-lresolv', `-lsocket' and `-lnsl'
+	after X11 checks.
+
+1998-09-27  Martin Baulig  <martin@home-of-linux.org>
+
+	* configure.in: Do not even check for guile if it is disabled.
+
+1998-09-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/sysinfo.h: New file. This is used in guname to
+	fetch as many information about the system as possible like detailed
+	information about hardware etc.
+
+	* configure.in (AM_PATH_GLIB): LibGTop now requires glib.
+
+1998-09-09  Martin Baulig <baulig@Stud.Informatik.uni-trier.de>
+
+	* include/glibtop/proctime.h (glibtop_proc_time): Added `xcpu_utime'
+ 	and `xcpu_stime'.
+
+	* sysdeps/linux/ChangeLog: New file.
+
+	* glibtop.h (glibtop): Added `ncpu'. This is zero for single processor
+	systems and the number of CPUs otherwise.
+
+	* include/glibtop/cpu.h (glibtop_cpu): Added `xcpu_total', `xcpu_user',
+	`xcpu_nice', `xcpu_sys' and `xcpu_idle'.
+	(GLIBTOP_NCPU): #define this to 4.
+
+1998-09-08  Martin Baulig  <baulig@merkur.uni-trier.de>
+
+	* configure.in: Make the default to disable guile.
+
+1998-08-30  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Added. This is a numerical
+	constant ("1.234.567" -> 1234567) to be used in C preprocessor
+	conditionals.
+
+1998-08-29  Martin Baulig  <martin@home-of-linux.org>
+
+	* LIBGTOP-VERSION (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): Added.
+	* configure.in (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): AC_SUBST.
+	(LT_RELEASE, LT_CURRENT, LT_REVISION, LT_AGE): AC_SUBST.
+	(LT_VERSION_INFO): Sets `-version-info' for libtool.
+
+	* */Makefile.am: We now use the correct `-version-info' parameter
+	for libtool.
+
+1998-08-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* include/glibtop/command.h (glibtop_call): Third argument is
+	now `const void *'.
+
+	* include/glibtop/xmalloc.h (glibtop_free): Now taking a
+	`const void *'.
+
+1998-08-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* src/daemon/ChangeLog: New file.
+
+	* sysdeps/sun4/ChangeLog: New file.
+
+	* sysdeps/stub/ChangeLog: New file.
+
+	* configure.in: Added check for `-lsocket'.
+	(LIBGTOP_INCS): Added $(SUPPORTINCS).
+	(INCLUDES): Added $(SUPPORTINCS).
+
+	* acconfig.h: Added `NEED_DECLARATION_GETHOSTNAME',
+	`NEED_DECLARATION_SETREUID', `NEED_DECLARATION_SETREGID'
+	and `NEED_DECLARATION_GETPAGESIZE'.
+
+	* includue/glibtop/global.h (<gnomesupport.h>): Include this.
+
+	* lib/init.c (_init_server): Declared `static'.
+
+	* lib/read_data.c: Added cast to `const void *' in calls to
+	`recv' and `read' to avoid compiler warnings.
+
+	* configure.in (INCLUDES): No longer using installed header files.
+
+1998-08-23  Martin Baulig  <martin@home-of-linux.org>
+
+	* features.def (mountlist): Using `int(fs_usage)'.
+
+1998-08-21  Martin Baulig  <martin@home-of-linux.org>
+
+	* ANNOUNCE-0.25: Released LibGTop 0.25 stable.
+
 1998-08-18  Martin Baulig  <martin@home-of-linux.org>

 	* LIBGTOP-VERSION: Set version number to 0.25.0. There is now really
--- a/29
+++ b/29
@@ -1,11 +1,28 @@
-LIBGTOP_MAJOR_VERSION=0
-LIBGTOP_MINOR_VERSION=25
-LIBGTOP_MICRO_VERSION=0
-LIBGTOP_VERSION=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION.$LIBGTOP_MICRO_VERSION
+# Making releases:
+#   LIBGTOP_MICRO_VERSION += 1;
+#   LIBGTOP_INTERFACE_AGE += 1;
+#   LIBGTOP_BINARY_AGE += 1;
+# if any functions have been added, set LIBGTOP_INTERFACE_AGE to 0.
+# if backwards compatibility has been broken,
+# set LIBGTOP_BINARY_AGE and LIBGTOP_INTERFACE_AGE to 0.
+#
+LIBGTOP_MAJOR_VERSION=1
+LIBGTOP_MINOR_VERSION=0
+LIBGTOP_MICRO_VERSION=11
+
+LIBGTOP_INTERFACE_AGE=10
+LIBGTOP_BINARY_AGE=10
+# you can set this to `-snap' for instance to create
+# a `libgtop-1.x.y-snap.tar.gz' tarball.
+LIBGTOP_VERSION_SUFFIX=

 # Increase each time you change the client/server protocol.
-LIBGTOP_SERVER_VERSION=1
+LIBGTOP_SERVER_VERSION=5
+
+# Don't change this
+LIBGTOP_VERSION=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION.$LIBGTOP_MICRO_VERSION
+LIBGTOP_VERSION_CODE=`echo "$LIBGTOP_MAJOR_VERSION 1000000 * $LIBGTOP_MINOR_VERSION 1000 * + $LIBGTOP_MICRO_VERSION + p q" | dc`

 # For automake.
-VERSION=$LIBGTOP_VERSION
+VERSION=$LIBGTOP_VERSION$LIBGTOP_VERSION_SUFFIX
 PACKAGE=libgtop
--- a/Makefile.am
+++ b/Makefile.am
@@ -6,101 +6,84 @@ else
 examples_SUBDIRS =
 endif

-if GUILE
-guile_SUBDIRS = guile
-else
-guile_SUBDIRS =
+if BUILD_GNOME_SUPPORT
+support = support
 endif

-
-SUBDIRS = po intl support macros include sysdeps lib src \
-	  $(examples_SUBDIRS)
-
-DIST_SUBDIRS = po intl support macros include sysdeps src lib guile examples
+SUBDIRS = po intl $(support) macros misc include sysdeps lib src \
+	  $(examples_SUBDIRS) doc

 include_HEADERS = glibtop.h

-EXTRA_DIST = autogen.sh libgtop.spec copyright.txt libgtopConf.sh.in \
-	LIBGTOP-VERSION features.def perl/Makefile.PL.in perl/perl.awk \
-	perl/MANIFEST perl/Changes libgtop-config.in RELNOTES-0.25
+EXTRA_DIST = autogen.sh libgtop.spec.in copyright.txt libgtopConf.sh.in \
+	LIBGTOP-VERSION features.def libgtop-config.in RELNOTES-0.25 \
+	RELNOTES-1.0 RELNOTES-1.0.x libgtop-sysdeps.m4 README \
+	libgtop-mirror.sh
+
+dist-hook:
+	cp libgtop.spec $(distdir)

 release:
-	$(MAKE) dist distdir=$(PACKAGE)$(VERSION)
+	$(MAKE) dist distdir=$(PACKAGE)-$(VERSION)

 ## Put `exec' in the name because this should be installed by
 ## `install-exec', not `install-data'.
-confexecdir=$(libdir)
-confexec_DATA = $(top_builddir)/libgtopConf.sh
+confexecdir	= $(libdir)
+confexec_DATA	= $(top_builddir)/libgtopConf.sh \
+		  $(top_builddir)/libgtop-features.def
+
+CLEANFILES=libgtopConf.sh

 bin_SCRIPTS = $(top_builddir)/libgtop-config

-noinst_DATA = $(top_builddir)/perl/Makefile.PL \
-		$(top_builddir)/perl/Libgtop.xs
-
 ## to automatically rebuild aclocal.m4 if any of the macros in
 ## `macros/' change
-@MAINT@include macros/macros.dep
+@MAINT@ include macros/macros.dep
@MAINT@macros/macros.dep: macros/Makefile.am
@MAINT@	cd macros && $(MAKE) macros.dep

+@MAINT@$(top_srcdir)/aclocal.m4: libgtop-sysdeps.m4 LIBGTOP-VERSION
+
 ## We create libgtopConf.sh here and not from configure because we want
 ## to get the paths expanded correctly.  Macros like srcdir are given
 ## the value NONE in configure if the user doesn't specify them (this
 ## is an autoconf feature, not a bug).
 libgtopConf.sh: libgtopConf.sh.in Makefile
 ## Use sed and then mv to avoid problems if the user interrupts.
-	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
-	    -e 's,\@LIBGTOP_INCLUDEDIR\@,$(includedir),g' \
-	    -e 's,\@LIBGTOP_EXTRA_LIBS\@,$(LIBGTOP_EXTRA_LIBS),g' \
-	    -e 's,\@LIBGTOP_LIBS\@,$(LIBGTOP_LIBS),g' \
-	    -e 's,\@LIBGTOP_INCS\@,$(LIBGTOP_INCS),g' \
-	    -e 's,\@LIBGTOP_NAMES_LIBS\@,$(LIBGTOP_NAMES_LIBS),g' \
-	    -e 's,\@LIBGTOP_NAMES_INCS\@,$(LIBGTOP_NAMES_INCS),g' \
-	    -e 's,\@LIBGTOP_GUILE_LIBS\@,$(LIBGTOP_GUILE_LIBS),g' \
-	    -e 's,\@LIBGTOP_GUILE_INCS\@,$(LIBGTOP_GUILE_INCS),g' \
-	    -e 's,\@LIBGTOP_GUILE_NAMES_LIBS\@,$(LIBGTOP_GUILE_NAMES_LIBS),g' \
-	    -e 's,\@LIBGTOP_GUILE_NAMES_INCS\@,$(LIBGTOP_GUILE_NAMES_INCS),g' \
-	    -e 's,\@LIBGTOP_BINDIR\@,$(LIBGTOP_BINDIR),g' \
-	    -e 's,\@LIBGTOP_SERVER\@,$(LIBGTOP_SERVER),g' \
-	    -e 's,\@LIBGTOP_MAJOR_VERSION\@,$(LIBGTOP_MAJOR_VERSION),g' \
-	    -e 's,\@LIBGTOP_MINOR_VERSION\@,$(LIBGTOP_MINOR_VERSION),g' \
-	    -e 's,\@LIBGTOP_MICRO_VERSION\@,$(LIBGTOP_MICRO_VERSION),g' \
-	    -e 's,\@LIBGTOP_VERSION\@,$(LIBGTOP_VERSION),g' \
-	    -e 's,\@LIBGTOP_SERVER_VERSION\@,$(LIBGTOP_SERVER_VERSION),g' \
-	    -e 's,\@libgtop_sysdeps_dir\@,$(libgtop_sysdeps_dir),g' \
-	    -e 's,\@libgtop_need_server\@,$(libgtop_need_server),g' \
-	    -e 's,\@libgtop_use_machine_h\@,$(libgtop_use_machine_h),g' \
-	    -e 's,\@libgtop_guile_found\@,$(libgtop_guile_found),g' \
-	    -e 's,\@libgtop_want_examples\@,$(libgtop_want_examples),g' \
+	sed -e 's#\@LIBGTOP_LIBDIR\@#$(libdir)#g' \
+	  -e 's#\@LIBGTOP_INCLUDEDIR\@#$(includedir)#g' \
+	  -e 's#\@LIBGTOP_DATADIR\@#$(datadir)#g' \
+	  -e 's#\@LIBGTOP_EXTRA_LIBS\@#$(LIBGTOP_EXTRA_LIBS)#g' \
+	  -e 's#\@LIBGTOP_LIBS\@#$(LIBGTOP_LIBS)#g' \
+	  -e 's#\@LIBGTOP_INCS\@#$(LIBGTOP_INCS)#g' \
+	  -e 's#\@LIBGTOP_NAMES_LIBS\@#$(LIBGTOP_NAMES_LIBS)#g' \
+	  -e 's#\@LIBGTOP_NAMES_INCS\@#$(LIBGTOP_NAMES_INCS)#g' \
+	  -e 's#\@LIBGTOP_GUILE_LIBS\@#$(LIBGTOP_GUILE_LIBS)#g' \
+	  -e 's#\@LIBGTOP_GUILE_INCS\@#$(LIBGTOP_GUILE_INCS)#g' \
+	  -e 's#\@LIBGTOP_GUILE_NAMES_LIBS\@#$(LIBGTOP_GUILE_NAMES_LIBS)#g' \
+	  -e 's#\@LIBGTOP_GUILE_NAMES_INCS\@#$(LIBGTOP_GUILE_NAMES_INCS)#g' \
+	  -e 's#\@LIBGTOP_BINDIR\@#$(LIBGTOP_BINDIR)#g' \
+	  -e 's#\@LIBGTOP_SERVER\@#$(LIBGTOP_SERVER)#g' \
+	  -e 's#\@LIBGTOP_MAJOR_VERSION\@#$(LIBGTOP_MAJOR_VERSION)#g' \
+	  -e 's#\@LIBGTOP_MINOR_VERSION\@#$(LIBGTOP_MINOR_VERSION)#g' \
+	  -e 's#\@LIBGTOP_MICRO_VERSION\@#$(LIBGTOP_MICRO_VERSION)#g' \
+	  -e 's#\@LIBGTOP_VERSION\@#$(LIBGTOP_VERSION)#g' \
+	  -e 's#\@LIBGTOP_VERSION_CODE\@#$(LIBGTOP_VERSION_CODE)#g' \
+	  -e 's#\@LIBGTOP_SERVER_VERSION\@#$(LIBGTOP_SERVER_VERSION)#g' \
+	  -e 's#\@libgtop_sysdeps_dir\@#$(libgtop_sysdeps_dir)#g' \
+	  -e 's#\@libgtop_need_server\@#$(libgtop_need_server)#g' \
+	  -e 's#\@libgtop_use_machine_h\@#$(libgtop_use_machine_h)#g' \
+	  -e 's#\@libgtop_guile_found\@#$(libgtop_guile_found)#g' \
+	  -e 's#\@libgtop_want_examples\@#$(libgtop_want_examples)#g' \
 	      < $(srcdir)/libgtopConf.sh.in > libgtopConf.tmp \
 	  && mv libgtopConf.tmp libgtopConf.sh

 libgtop-config: libgtop-config.in Makefile
-	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
+	sed -e 's#\@LIBGTOP_LIBDIR\@#$(libdir)#g' \
 	      < $(srcdir)/libgtop-config.in > libgtop-config.tmp \
 	  && mv libgtop-config.tmp libgtop-config && \
 		chmod 755 libgtop-config

-perl/Makefile.PL: perl/Makefile.PL.in Makefile
-## Use sed and then mv to avoid problems if the user interrupts.
-	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
-	    -e 's,\@LIBGTOP_INCLUDEDIR\@,$(includedir),g' \
-	    -e 's,\@LIBGTOP_LIBS\@,$(LIBGTOP_LIBS),g' \
-	    -e 's,\@LIBGTOP_INCS\@,$(LIBGTOP_INCS),g' \
-	    -e 's,\@LIBGTOP_GUILE_LIBS\@,$(LIBGTOP_GUILE_LIBS),g' \
-	    -e 's,\@LIBGTOP_GUILE_INCS\@,$(LIBGTOP_GUILE_INCS),g' \
-	    -e 's,\@LIBGTOP_BINDIR\@,$(LIBGTOP_BINDIR),g' \
-	    -e 's,\@LIBGTOP_SERVER\@,$(LIBGTOP_SERVER),g' \
-	    -e 's,\@libgtop_sysdeps_dir\@,$(libgtop_sysdeps_dir),g' \
-	    -e 's,\@libgtop_need_server\@,$(libgtop_need_server),g' \
-	    -e 's,\@libgtop_use_machine_h\@,$(libgtop_use_machine_h),g' \
-	    -e 's,\@libgtop_guile_found\@,$(libgtop_guile_found),g' \
-	    -e 's,\@libgtop_want_names\@,$(libgtop_want_names),g' \
-	    -e 's,\@libgtop_want_guile_names\@,$(libgtop_want_guile_names),g' \
-	    -e 's,\@libgtop_want_examples\@,$(libgtop_want_examples),g' \
-	      < $(srcdir)/perl/Makefile.PL.in > perl/Makefile.tmp \
-	  && mv perl/Makefile.tmp perl/Makefile.PL
+libgtop-features.def: features.def
+	@LN_S@ $< $@

-perl/Libgtop.xs: perl/perl.awk $(top_builddir)/config.h $(top_srcdir)/features.def
-	$(AWK) -f $(top_srcdir)/perl/perl.awk < $(top_srcdir)/features.def > perl/lgt-t
-	mv perl/lgt-t perl/Libgtop.xs
--- a/255
+++ b/255
@@ -1,244 +1,53 @@
-$Id$
-
-Jun/01/1998
-===========
-
-	* We have some new ``suffix rules'':
-
-	  '__l' is a function defined in the client part;
-	  '__s' is a function defined in the sysdeps part and
-	  '__p' is a function that needs special priviledges.
-	  '__r' is mapped either on '__p' or on '__s'.
-	  the function without suffix is mapped on '__l'.
+February 14, 2001:
+=================

-	* We now decide at runtime whether or not using the server
-	is required for a particular function. All user programs
-	now call the '__l' function defined in '-lgtop' (in the lib
-	subdir). These functions either use 'glibtop_call__l' to
-	call the server or call the '__r' function.
+* Released LibGTop 1.0.11 "Jasmin":

-	* A function in the sysdeps directory now has the '__s' suffix
-	if it do not need any priviledges (and thus can be called directly
-	from client code) and the '__p' suffix otherwise (when it has to
-	be called from the server).
+  [The release which was supposed to be called "Gerolzhofen".]

-	* If you call one of these functions:
+  - merged in the Solaris code from LIBGTOP_1_1_2_PATCHES.

-	  -> use the '__p' suffix to be sure to get the SUID-safe one
-	     (used in the server).
-	  -> use the '__s' suffix to be sure to get a function that
-	     doesn't need any priviledges.
-	  -> use the '__r' suffix otherwise (it is mapped either on the
-	     '__p' or on the '__s' one).
-
-	Only use the '__p' and '__s' functions in a 'GLIBTOP_SUID_<feature>'
-	conditional, otherwise you'll get undefined symbols !
-
-	* The server is now started from 'glibtop_init__r', but only when
-	it's really needed; for instance on DEC OSF/1 you only need it
-	for the proc* features - if you program only fetches the CPU usage,
-	now server will be started.
+  - minor OpenBSD fixes.

-	* Sorry, at the moment everything is a little bit unstable, I'm doing
-	heavy changes. I've just some great ideas which still need some work:
-
-	  -> I want to have a SUID server that only implements those features
-	     that need to be SUID; everything else uses the sysdeps code directly.
+  - again a bunch of updated translations.

-	  -> If a program only uses stuff that do not need the server, the
-	     server will not be started at all.
+  Please test the Solaris stuff and report and bugs and
+  problems as soon as possible; I'll make a new release
+  for the 2nd beta of GNOME 1.4 if necessary.

-	  -> I'm working on some kind of proxy server that can be used on a remote
-	     host; in feature one can then use the MDI stuff from ghex in gtop to
-	     have notebook pages displaying processes from different hosts.
+November 20, 2000:
+=================

-	* Well it is as much unstable that it only works under Linux at the moment.
+* Released LibGTop 1.0.10 "November Rain":

-1998-06-01  Martin Baulig  <martin@home-of-linux.org>
+  - this release contains a bunch of updated translations.

-	* sysdeps/common/sysdeps.c: now using '__r' functions,
-	they are #defined either as the '__p' or the '__s' ones.
+May 25, 2000:
+============

-	* sysdeps/linux/*.c: changed call of 'glibtop_init__r',
-	it now takes two additional arguments.
+* Released LibGTop 1.0.9 "Stuttgart".

-	* examples/{first.c, second.c}: now using 'glibtop_init'
-	instead of 'glibtop_init__r'.
+  (LibGTop 1.0.8 "Frankfurt" was not publically released.)

-	* include/glibtop/sysdeps.h: added 'dummy' member so
-	'GLIBTOP_SYSDEPS_<feature>' now start with 1.
+February 15, 2000:
+=================

-	* include/glibtop/*.h: we now #define 'glibtop_get_<feature>'
-	as 'glibtop_get_<feature>__l' and 'glibtop_get_<feature>__r'
-	either as the '__p' or the '__s' function.
+* Released LibGTop 1.0.7 "Copenhagen":

-	* lib/*.c: removed #if's - we now decide at runtime
-	whether to use the server or to call the appropriate
-	function for the sysdeps directory.
+  - this is a bug fix release for the GUADEC CD-ROM;
+    it contains fixes in both the Linux and *BSD sysdeps
+    directory.

-1998-05-28  Martin Baulig  <baulig@merkur.uni-trier.de>
+October 18, 1999:
+================

-	* src/server/main.c: we now use the '__p' functions,
-	but only if the appropriate 'GLIBTOP_SUID_<feature>'
-	has a non-zero value.
-	
-	* configure.in (@machine_incs@): always use 
-	`-I$(top_srcdir)/sysdeps/@sysdeps_dir@'; it's no
-	longer conditional.
+* Released LibGTop 1.0.6 "October LibGTop":

-	* examples/Makefile.am: removed the '_linux' examples.
-	
-	* sysdeps/linux/*.c: renamed all functions implementing
-	features to '__s'.
-	
-	* lib/*.c: renamed all functions implementing features
-	to '__l'; we only emit code for those functions if the
- 	corresponding 'GLIBTOP_SUID_<feature>' has a positive value.
-	
-	* include/glibtop/*.h: added some new function suffixes:
-	'__l' is a function defined in the client part;
-	'__s' is a function defined in the sysdeps part and
-	'__p' is a function that needs special priviledges.
-	'__r' is mapped either on '__l' or on '__s'.
-	
-	* sysdeps/linux/glibtop_server.h: New file -
-	defines system dependent constants 'GLIBTOP_SUID_<feature>'
-	being either 'GLIBTOP_SYSDEPS_<feature>'+1 depending upon
- 	whether or not this feature requires using the server.
+  - compilation fixes for FreeBSD.
+  - updated reference manual.

-	* lib/sysdeps.c: removed that file; it is no longer
-	needed.
+September 29, 1999:
+==================

+* Released LibGTop 1.0.5.

-
-May/21/1998
-===========
-
-* doc/gnome-hackers.sgml: This is a short intro on how to use libgtop
-  in the GNOME project. It covers especially the use of its 'configure'
-  script and the automatically generated 'gtopConf.sh'.
-
-May/20/1998
-===========
-
-* 'gtopConf.sh' now defines 'GTOP_LIBS' and 'GTOP_INCS' in a manner
-  that they contain everything that is needed to link some program with
-  libgtop. It will use '-lgtop' only if the server is really needed and
-  '-lgtop_sysdeps' otherwise;
-
-* 'gtopConf.sh' additionally defines 'GTOP_GUILE_LIBS' and 'GTOP_GUILE_INCS'
-  containing everything that is needed to link some program both with
-  libgtop and its guile interface. They are identically to 'GTOP_LIBS'
-  and 'GTOP_INCS' if building the guile interface is disabled or guile
-  cannot be found on the system.
-
-* 'configure' takes additional arguments '--enable-libgtop-server' and
-  '--disable-libgtop-server' to use the server even when it's not needed
-  or to disable it's use where it's needed.
-
-* 'configure' takes an argument '--without-libgtop-guile' to disable
-  guile support.
-
-* 'configure takes an argument '--without-libgtop-names' to remove
-  '-lgtop_names' (and '-lgtop_guile_names' when we have guile) from
-  'GTOP_LIBS'; in this case these libraries are not even built.
-
-May/19/1998
-===========
-
-* Libgtop is now in the GNOME CVS Repository.
-
-May/17/1998
-===========
-
-* we have now 'const char *glibtop_types_* []' consisting
-  of the C types of the corresponding files of '_glibtop_*'.
-
-* added guile function '(glibtop-types-*)' and '(glibtop-descriptions-*)'.
-
-May/10/1998
-===========
-
-* Port to DEC OSF1 3.0 has been made:
-
-  cpu		(total, user, nice, sys, idle)
-  mem		(total, used, free)
-
-  loadavg	(loadavg)
-  uptime	(uptime)
-
-  msg_limits	(map, max, mnb, mni, tql)
-  sem_limits	(mni, msl, opm, vmx, aem)
-  shm_limits	(max, min, mni, seg)
-
-  The following need the server to be SUID root:
-
-  proclist	(total, number, size)
-  procdata	(cmd, state, uid, pid, ppid, pgrp, tty, k_flags,
-		 session, tpgid, sigignore, sigcatch, signal, nice, 
-		 priority, resident, rss, vsize, utime, stime,
-		 cutime, cstime, trs, drs)
-
-May/07/1998
-===========
-
-* 'flags' member of sysdeps/linux/procdata.c is now
-  'unsigned long flags [2]'.
-
-* When we give glibtop_get_procdata () a pid of zero, only
-  the flags are returned.
-
-* We now use static constants instead of #defines for sysdeps flags.
-
-May/03/1998
-===========
-
-* VPATH-Build now working; sometimes it's necessary to copy
-  $(top_srcdir)/po/cat-id-tbl.c to $(top_builddir)/po.
-
-* The library has been tested on the following systems:
-
-  - i686-pc-linux-gnu
-  - sparc-sun-sunos4.1.1
-  - alpha-dec-osf1 (that's DEC OSF1 3.0 and 3.2)
-
-* Compilation has been tested on the following systems (I have no root
-  access there and cannot test the library because of this):
-
-  - sparc-sun-solaris2
-  - i386-bsdi
-
-* Does no longer require Gnome.
-
-* Guile-Parts are compiled only if guile can be found.
-
-* Some of the executables are statically linked to copy them more easily
-  between machines.
-
-May/02/1998
-===========
-
- * Global changes to the interfaces, all functions except glibtop_open()
-   and glibtop_close() that took a server argument have now a '__r' suffix;
-   the original name is now a macro that uses glibtop_global_server.
-
-Apr/10/1998
-===========
-Added new directory sysdeps/guile/names. It is the guile interface
-to the gtop_names library found in sysdeps/names. Changed
-GLIBTOP_DESCRIPTIONS to GLIBTOP_NAMES and added GLIBTOP_GUILE_NAMES
-to the header files.
-
-Apr/09/1998
-===========
-Added new directories guile and names to sysdeps. In names are
-some string constants about the data stored in the structures.
-guile is a guile interface for the library. It is used in
-examples/third (which has been completely rewritten).
-The header files define things from names when GLIBTOP_DESCRIPTIONS
-if defined and/or from guile when HAVE_GUILE is defined.
-
-Apr/08/1998
-===========
-
-Added guile wrapper for the library (see examples/third).
--- a/59
+++ b/59
@@ -1,57 +1,8 @@
-Hi all,
+$Id$

-[PLEASE READ THE FILE ``README.LATEST'' FOR LATEST NEWS]
-
-this is the latest alpha version of libgtop, a library that fetches
-information about the running system such as cpu and memory usage,
-active processes etc. On Linux systems, these information are taken
-directly from the /proc filesystem. For other systems such as Solaris,
-where such programs need to be suid root (or only setgid kmem/mem on
-some systems), it provides a suid/setgid server that fetches those
-information and a client-side library that talks to this server.
-
-Main idea was to have the same interface for all operating systems,
-thus all system dependent details are hidden in the implementation
-of that server.
-
-Currently, it only works for Linux, documentation on how to port it
-to other systems is on the way. I'm planning to keep this site an
-up-to-date mirror of my local machine (which is connected to the
-internet over some expensive dialup connection, so I'll upload it about
-once every day I made significant changes) so that you can always find
-the latest version of the software here.
-
-I've written a simple guile interface for the library to show which
-information it can already fetch. See examples/third for details.
-
-Source Code:
+LATEST NEWS:
 ===========

-   libgtop-current-cvs.cpio.gz     is a cpio archive from the CVS repository
-   libgtop-current.cpio.gz         contains the lates checked out sources
-   libgtop-stable.cpio.gz          if present, it contains the last stable release
-
-Documentation:
-=============
-
-   libgtop.sgml                    is the SGML source of the (DocBook) documentation
-
-The next three files are only provided until they get too big to upload.
-
-   libgtop.tex                     TEX file of the documentation
-   libgtop.dvi                     DVI file of the documentation
-   libgtop.ps                      Postscript file of the documentation
-
-HTML-Documentation:
-==================
-
-   libgtop.shtml                   Start here to browse the HTML documentation
-
-Other stuff:
-===========
-
-   README, NEWS, ChangeLog         copied from the sources
-
-Enjoy it!
-
-Martin (martin@home-of-linux.org - baulig@merkur.uni-trier.de)
+Please look also in the file 'NEWS' for latest news.
+ 
+Martin
--- a/README.LATEST
+++ b/README.LATEST
@@ -1,8 +0,0 @@
-$Id$
-
-LATEST NEWS:
-===========
-
-Please look also in the file 'NEWS' for latest news.
- 
-Martin
--- a/RELNOTES-1.0
+++ b/RELNOTES-1.0
@@ -0,0 +1,163 @@
+RELEASE NOTES FOR LIBGTOP 1.0 STABLE
+====================================
+
+OVERVIEW
+--------
+
+LibGTop is a library that read information about processes and the
+running systems. This information include:
+
+General System Information:
+
+cpu		- CPU Usage
+mem		- Memory Usage
+swap		- Swap Usage (including paging activity)
+loadavg		- Load average (including nr_running, nr_tasks, last_pid)
+uptime		- Uptime and Idle time, can be calculated from CPU usage
+
+SYS V IPC Limits:
+
+shm_limits	- Shared Memory Limits
+msg_limits	- Message Queue Limits
+sem_limits	- Semaphore Set Limits
+
+Network:
+
+netload		- Network load
+ppp		- PPP statistics
+
+Process List:
+
+proclist	- List of processes
+
+Process information:
+
+proc_state	- cmd, state, uid, gid
+proc_uid	- uid,euid,gid,egid,pid,ppid,pgrp
+		  session,tty,tpgid,priority,nice
+proc_mem	- size,vsize,resident,share,rss,rss_rlim
+proc_time	- start_time,rtime,utime,stime,cutime,cstime
+		  timeout,it_real_value,frequency
+proc_signal	- signal,blocked,sigignore,sigcatch
+proc_kernel	- k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt
+		  kstk_esp,kstk_eip,nwchan,wchan
+proc_segment	- text_rss,shlib_rss,data_rss,stack_rss,dirty_size
+		  start_code,end_code,start_stack
+
+Process maps:
+
+proc_args	- Command line arguments
+proc_map	- Process map (/proc/<pid>/maps under Linux)
+
+File system usage:
+
+mountlist	- List of currently mounted filesystems
+fsusage		- File system usage
+
+PORTABILITY:
+-----------
+
+LibGTop is designed to be as portable as possible. None of the
+functions and retrieved information should be specific to a specific
+operating system. So you only need to port the system dependent part
+of the library to a new system and all application programs can then
+use libgtop on this new system.
+
+CLIENT/SERVER MODEL:
+-------------------
+
+Some systems like DEC OSF/1 or BSD require special privileges for the
+calling process to fetch the required information (SUID root/SGID
+kmem). To solve this problem, I designed a client/server model which
+makes a call to a SUID/SGID server which fetches the required
+information whenever it is required. This server is only called for
+features that really require privileges, otherwise the sysdeps code
+is called directory (every user can get the CPU usage on DEC OSF/1,
+but only root can get information about processes other than the
+current one).
+
+There is also some kind of daemon which can be used to fetch
+information from remote systems (still experimental). This daemon
+normally runs as nobody and calls the SUID/SGID itself when needed.
+
+LIBGTOP AND GNOME:
+-----------------
+
+LibGTop is currently used in various places in the GNOME Project,
+for instance in some of the applets in gnome-core and - of cause -
+this ultra-cool application called GTop ...
+
+Although LibGTop is not specific to GNOME and under GPL license, I
+spent most my time during the last months to work in the GNOME project
+so this is the primary use for LibGTop (and currently the only one).
+
+However, you can also give its configure.in script the `--without-gnome'
+parameter and then use it fully without GNOME in your own applications.
+
+LIBGTOP AND GNOME - PART II:
+---------------------------
+
+LibGTop was tested with FreeBSD 3.0 but it should also work with
+FreeBSD 2.2.7, NetBSD and OpenBSD.
+
+Currently my primary aim is to help the GNOME people with our 1.0 release
+so I won't have much time to test it with any other system than Linux.
+
+However, I consider FreeBSD, NetBSD and OpenBSD as supported systems for
+LibGTop and whenever I get bug reports I will do my best to fix them as
+quickly as possible.
+
+PLATFORM SPECIFIC NOTES FOR LINUX:
+==================================
+
+Under Linux, LibGTop should work without problems and read everything
+from /proc.
+
+LibGTop 0.25 also had an experimental kernel interface to read this
+information directly from the kernel with a system call - but I have
+currently dropped support for this as I am too busy with GNOME
+development to keep current with kernel hacking.
+
+PLATFORM SPECIFIC NOTES FOR SOLARIS:
+====================================
+
+Since so many people were asking me about this:
+
+LibGTop currently does not have any support for Solaris, and it will
+never have until some volunteer writes the code for it. I can't do this
+myself since I do not have any machine to test it on.
+
+PLATFORM SPECIFIC NOTES FOR BSD:
+=================================
+
+There are a few caveats:
+
+* You need to manually make the `$(prefix)/bin/libgtop_server' SGID to
+  kmem after installation and mount the /proc file system of FreeBSD
+  (/proc/<pid>/mem is used within kvm_uread ()).
+
+* To get the filenames of the process maps displayed in GTop, you need
+  to configure with the `--with-libgtop-inodedb' option (you need GDBM
+  for this to work).
+
+  You have then to create an inode database which is used to look up
+  filenames. This is done using the `mkinodedb' program which comes
+  along with libgtop.
+
+  See the file src/inodedb/README for details:
+
+  The `mkinodedb' program which is build in this directory takes two
+  command line arguments: the full pathname of the database to be
+  created and the name of a configuration file consisting of directory
+  and file names each on a line by itself - see `/etc/ld.so.conf' for
+  an example.
+
+  Putting a directory name in this file means all regular files found
+  in this directory are included in the database, but it will not
+  recursively descend into subdirectories (for instance, we want
+  everything in `/usr/lib' but not every single file in `/usr/lib/sgml').
+  You can also use filenames to include a single file.
+
+Have fun,
+
+Martin <martin@home-of-linux.org>
--- a/RELNOTES-1.0.x
+++ b/RELNOTES-1.0.x
@@ -0,0 +1,172 @@
+RELEASE NOTES FOR LIBGTOP 1.0.7
+===============================
+
+OVERVIEW
+--------
+
+LibGTop is a library that read information about processes and the
+running systems. This information include:
+
+General System Information:
+
+cpu		- CPU Usage
+mem		- Memory Usage
+swap		- Swap Usage (including paging activity)
+loadavg		- Load average (including nr_running, nr_tasks, last_pid)
+uptime		- Uptime and Idle time, can be calculated from CPU usage
+
+SYS V IPC Limits:
+
+shm_limits	- Shared Memory Limits
+msg_limits	- Message Queue Limits
+sem_limits	- Semaphore Set Limits
+
+Network:
+
+netload		- Network load
+ppp		- PPP statistics
+
+Process List:
+
+proclist	- List of processes
+
+Process information:
+
+proc_state	- cmd, state, uid, gid
+proc_uid	- uid,euid,gid,egid,pid,ppid,pgrp
+		  session,tty,tpgid,priority,nice
+proc_mem	- size,vsize,resident,share,rss,rss_rlim
+proc_time	- start_time,rtime,utime,stime,cutime,cstime
+		  timeout,it_real_value,frequency
+proc_signal	- signal,blocked,sigignore,sigcatch
+proc_kernel	- k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt
+		  kstk_esp,kstk_eip,nwchan,wchan
+proc_segment	- text_rss,shlib_rss,data_rss,stack_rss,dirty_size
+		  start_code,end_code,start_stack
+
+Process maps:
+
+proc_args	- Command line arguments
+proc_map	- Process map (/proc/<pid>/maps under Linux)
+
+File system usage:
+
+mountlist	- List of currently mounted filesystems
+fsusage		- File system usage
+
+PORTABILITY:
+-----------
+
+LibGTop is designed to be as portable as possible. None of the
+functions and retrieved information should be specific to a specific
+operating system. So you only need to port the system dependent part
+of the library to a new system and all application programs can then
+use libgtop on this new system.
+
+CLIENT/SERVER MODEL:
+-------------------
+
+Some systems like DEC OSF/1 or BSD require special privileges for the
+calling process to fetch the required information (SUID root/SGID
+kmem). To solve this problem, I designed a client/server model which
+makes a call to a SUID/SGID server which fetches the required
+information whenever it is required. This server is only called for
+features that really require privileges, otherwise the sysdeps code
+is called directory (every user can get the CPU usage on DEC OSF/1,
+but only root can get information about processes other than the
+current one).
+
+There is also some kind of daemon which can be used to fetch
+information from remote systems (still experimental). This daemon
+normally runs as nobody and calls the SUID/SGID itself when needed.
+
+LIBGTOP AND GNOME:
+-----------------
+
+Although LibGTop is part of the GNOME desktop environment, its main
+interface is totally independent from any particular desktop environment,
+so you can also use it as a standalone library in any piece of GPLed
+software which makes it also a valuable part of the GNU project.
+
+LibGTop is currently used in various places in the GNOME Project,
+for instance in some of the applets in gnome-core and - of cause -
+this ultra-cool application called GTop ...
+
+However, you need to give the configure.in script the `--without-gnome'
+parameter when you want to use LibGTop without GNOME (this is because,
+if you want to use it with GNOME, you need to compile it after the main
+GNOME libraries and I wanted to avoid getting unnecessary bug reports
+about this).
+
+LIBGTOP AND GNOME - PART II:
+---------------------------
+
+LibGTop was tested with FreeBSD 3.0 but it should also work with
+FreeBSD 2.2.7, NetBSD and OpenBSD.
+
+Unfortunately, I don't have the power and disk space to install all
+possible operating systems out there on my machine and test things myself,
+so I depend on people telling me whether it works and sending me bug
+reports and patches if not.
+
+However, I consider FreeBSD, NetBSD and OpenBSD as supported systems for
+LibGTop and whenever I get bug reports I will do my best to fix them as
+quickly as possible.
+
+PLATFORM SPECIFIC NOTES FOR LINUX:
+==================================
+
+[I am speaking of the Linux kernel here.]
+
+Under Linux, LibGTop should work without problems and read everything
+from /proc.
+
+LibGTop 0.25 also had an experimental kernel interface to read this
+information directly from the kernel with a system call - but I have
+currently dropped support for this as I am too busy with GNOME
+development to keep current with kernel hacking.
+
+PLATFORM SPECIFIC NOTES FOR SOLARIS:
+====================================
+
+The development branch of LibGTop (the 1.1.x series) has a first version
+of the Solaris port which works at least on Solaris 7.
+
+If you are on a Solaris system and want to give it a try, just fetch the
+latest 1.1.x tarball from ftp://ftp.home-of-linux.org/pub/libgtop/1.1/
+and try it out.
+
+PLATFORM SPECIFIC NOTES FOR BSD:
+=================================
+
+There are a few caveats:
+
+* You need to manually make the `$(prefix)/bin/libgtop_server' SGID to
+  kmem after installation and mount the /proc file system of FreeBSD
+  (/proc/<pid>/mem is used within kvm_uread ()).
+
+* To get the filenames of the process maps displayed in GTop, you need
+  to configure with the `--with-libgtop-inodedb' option (you need GDBM
+  for this to work).
+
+  You have then to create an inode database which is used to look up
+  filenames. This is done using the `mkinodedb' program which comes
+  along with libgtop.
+
+  See the file src/inodedb/README for details:
+
+  The `mkinodedb' program which is build in this directory takes two
+  command line arguments: the full pathname of the database to be
+  created and the name of a configuration file consisting of directory
+  and file names each on a line by itself - see `/etc/ld.so.conf' for
+  an example.
+
+  Putting a directory name in this file means all regular files found
+  in this directory are included in the database, but it will not
+  recursively descend into subdirectories (for instance, we want
+  everything in `/usr/lib' but not every single file in `/usr/lib/sgml').
+  You can also use filenames to include a single file.
+
+Have fun,
+
+Martin <martin@home-of-linux.org>
--- a/acconfig.h
+++ b/acconfig.h
@@ -1,3 +1,21 @@
+
+/* Define if gethostname () must be declared. */
+#undef NEED_DECLARATION_GETHOSTNAME
+
+/* Define if setreuid () must be declared. */
+#undef NEED_DECLARATION_SETREUID
+
+/* Define if setregid () must be declared. */
+#undef NEED_DECLARATION_SETREGID
+
+/* Define if getpagesize () must be declared. */
+#undef NEED_DECLARATION_GETPAGESIZE
+
+/* Define if program_invocation_name must be declared. */
+#undef NEED_DECLARATION_PROGRAM_INVOCATION_NAME
+
+@TOP@
+
 #undef ENABLE_NLS
 #undef HAVE_CATGETS
 #undef HAVE_GETTEXT
@@ -103,7 +121,6 @@
 #undef HAVE_LIBTIFF
 #undef HAVE_LIBZ
 #undef HAVE_LIBPNG
-#undef GNOME_ENABLE_DEBUG
 #undef HAVE_GMP2_INCLUDE_DIR
 #undef HAVE_GUILE

@@ -122,6 +139,31 @@
 #undef NEED_LIBGTOP

 #undef HAVE_LINUX_TABLE
+#undef HAVE_LIBGTOP_SMP

 #undef HAVE_XAUTH

+/* Define if your have the I4B package. */
+#undef HAVE_I4B
+#undef HAVE_I4B_ACCT
+
+/* Define to enable debugging. */
+#undef LIBGTOP_ENABLE_DEBUG
+#undef LIBGTOP_FATAL_WARNINGS
+
+/* Same as LINUX_VERSION_CODE either from <linux/version.h> or from
+ * the running kernel (if we don't have configured kernel sources).
+ */
+#undef GLIBTOP_LINUX_VERSION_CODE
+
+/* Solaris release code (eg. 251 for Solaris 2.5.1). */
+#undef GLIBTOP_SOLARIS_RELEASE
+
+/* Define if you want to use LibGTop without GNOME. */
+#undef WITHOUT_GNOME
+
+/* Define if you have the <procfs.h> header file */
+#undef HAVE_PROCFS_H
+
+/* Define if you have the <sys/procfs.h> header file */
+#undef HAVE_SYS_PROCFS_H
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -1,400 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.2h
-
-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-######################################################################
-# progtest.m4 from gettext 0.32
-######################################################################
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-
-######################################################################
-# lcmessage.m4 from gettext 0.32
-######################################################################
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES)
-    fi
-  fi])
-
-
-
-######################################################################
-# gettext.m4 from gettext 0.32
-######################################################################
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 3
-
-AC_DEFUN(AM_WITH_NLS,
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    USE_INCLUDED_LIBINTL=no
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS)
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
-	CATOBJEXT=NONE
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CACHE_CHECK([for gettext in libintl],
-		 gt_cv_func_gettext_libintl,
-		 [AC_TRY_LINK([], [return (int) gettext ("")],
-		 gt_cv_func_gettext_libintl=yes,
-		 gt_cv_func_gettext_libintl=no)])])
-	   fi
-
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT)
-	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
-	])
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  AC_MSG_CHECKING([whether catgets can be used])
-	  AC_ARG_WITH(catgets,
-	    [  --with-catgets          use catgets functions if available],
-	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-	  AC_MSG_RESULT($nls_cv_use_catgets)
-
-	  if test "$nls_cv_use_catgets" = "yes"; then
-	    dnl No gettext in C library.  Try catgets next.
-	    AC_CHECK_LIB(i, main)
-	    AC_CHECK_FUNC(catgets,
-	      [AC_DEFINE(HAVE_CATGETS)
-	       INTLOBJS="\$(CATOBJS)"
-	       AC_PATH_PROG(GENCAT, gencat, no)dnl
-	       if test "$GENCAT" != "no"; then
-		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-		 if test "$GMSGFMT" = "no"; then
-		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-		 fi
-		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		 USE_INCLUDED_LIBINTL=yes
-		 CATOBJEXT=.cat
-		 INSTOBJEXT=.cat
-		 DATADIRNAME=lib
-		 INTLDEPS='$(top_builddir)/intl/libintl.a'
-		 INTLLIBS=$INTLDEPS
-		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-		 nls_cv_header_intl=intl/libintl.h
-		 nls_cv_header_libgt=intl/libgettext.h
-	       fi])
-	  fi
-        fi
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-        AC_SUBST(MSGFMT)
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS='$(top_builddir)/intl/libintl.a'
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=intl/libintl.h
-        nls_cv_header_libgt=intl/libgettext.h
-      fi
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      # We need to process the po/ directory.
-      POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=intl/libintl.h
-      nls_cv_header_libgt=intl/libgettext.h
-    fi
-
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
-    if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-AC_DEFUN(AM_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h sys/param.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY)
-   fi
-
-   AM_LC_MESSAGES
-   AM_WITH_NLS
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl The reference to <locale.h> in the installed <libintl.h> file
-   dnl must be resolved because we cannot expect the users of this
-   dnl to define HAVE_LOCALE_H.
-   if test $ac_cv_header_locale_h = yes; then
-     INCLUDE_LOCALE_H="#include <locale.h>"
-   else
-     INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>.  Take care yourself.  */"
-   fi
-   AC_SUBST(INCLUDE_LOCALE_H)
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   test -d intl || mkdir intl
-   if test "$CATOBJEXT" = ".cat"; then
-     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-     dnl Transform the SED scripts while copying because some dumb SEDs
-     dnl cannot handle comments.
-     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
-   fi
-   dnl po2tbl.sed is always needed.
-   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl *** For now the libtool support in intl/Makefile is not for real.
-   l=
-   AC_SUBST(l)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   if test "x$srcdir" != "x."; then
-     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-       posrcprefix="$srcdir/"
-     else
-       posrcprefix="../$srcdir/"
-     fi
-   else
-     posrcprefix="../"
-   fi
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-  ])
--- a/config.guess
+++ b/config.guess
@@ -1,883 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <bothner@cygnus.com>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >dummy.s
-	.globl main
-	.ent main
-main:
-	.frame \$30,0,\$26,0
-	.prologue 0
-	.long 0x47e03d80 # implver $0
-	lda \$2,259
-	.long 0x47e20c21 # amask $2,$1
-	srl \$1,8,\$2
-	sll \$2,2,\$2
-	sll \$0,3,\$0
-	addl \$1,\$0,\$0
-	addl \$2,\$0,\$0
-	ret \$31,(\$26),1
-	.end main
-EOF
-	${CC-cc} dummy.s -o dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		./dummy
-		case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-		esac
-	fi
-	rm -f dummy.s dummy
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
-	exit 0 ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit 0 ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-cbm-sysv4
-	exit 0;;
-    amiga:NetBSD:*:*)
-      echo m68k-cbm-netbsd${UNAME_RELEASE}
-      exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    arm32:NetBSD:*:*)
-	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    SR2?01:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
-    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit 0 ;;
-    NILE:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit 0 ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:NetBSD:*:*)
-	echo m68k-atari-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:NetBSD:*:*)
-	echo m68k-sun-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:NetBSD:*:*)
-	echo m68k-apple-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    2020:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	sed 's/^	//' << EOF >dummy.c
-	int main (argc, argv) int argc; char **argv; {
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	${CC-cc} dummy.c -o dummy \
-	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit 0 ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit 0 ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit 0 ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
-	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	fi
-        else echo i586-dg-dgux${UNAME_RELEASE}
-        fi
- 	exit 0 ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit 0 ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit 0 ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit 0 ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i?86:AIX:*:*)
-	echo i386-ibm-aix
-	exit 0 ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		sed 's/^		//' << EOF >dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-		rm -f dummy.c dummy
-		echo rs6000-ibm-aix3.2.5
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit 0 ;;
-    *:AIX:*:4)
-	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=4.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit 0 ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit 0 ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit 0 ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit 0 ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit 0 ;;
-    9000/[3478]??:HP-UX:*:*)
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
-	    9000/8?? )            HP_ARCH=hppa1.0 ;;
-	esac
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    3050*:HI-UX:*:*)
-	sed 's/^	//' << EOF >dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
-	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit 0 ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit 0 ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i?86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit 0 ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit 0 ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit 0 ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit 0 ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit 0 ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit 0 ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*X-MP:*:*:*)
-	echo xmp-cray-unicos
-        exit 0 ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-	exit 0 ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY-2:*:*:*)
-	echo cray2-cray-unicos
-        exit 0 ;;
-    F300:UNIX_System_V:*:*)
-        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    F301:UNIX_System_V:*:*)
-       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
-       exit 0 ;;
-    hp3[0-9][05]:NetBSD:*:*)
-	echo m68k-hp-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    i?86:BSD/386:*:* | *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
-    *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    i*:CYGWIN*:*)
-	echo i386-pc-cygwin32
-	exit 0 ;;
-    i*:MINGW*:*)
-	echo i386-pc-mingw32
-	exit 0 ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin32
-	exit 0 ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    *:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us.
-	ld_help_string=`ld --help 2>&1`
-	ld_supported_emulations=`echo $ld_help_string \
-			 | sed -ne '/supported emulations:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_emulations" in
-	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
-	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
-	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  elf32ppc)   echo "powerpc-unknown-linux-gnu"              ; exit 0 ;;
-	esac
-
-	if test "${UNAME_MACHINE}" = "alpha" ; then
-		sed 's/^	//'  <<EOF >dummy.s
-		.globl main
-		.ent main
-	main:
-		.frame \$30,0,\$26,0
-		.prologue 0
-		.long 0x47e03d80 # implver $0
-		lda \$2,259
-		.long 0x47e20c21 # amask $2,$1
-		srl \$1,8,\$2
-		sll \$2,2,\$2
-		sll \$0,3,\$0
-		addl \$1,\$0,\$0
-		addl \$2,\$0,\$0
-		ret \$31,(\$26),1
-		.end main
-EOF
-		LIBC=""
-		${CC-cc} dummy.s -o dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			./dummy
-			case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-			esac	
-
-			objdump --private-headers dummy | \
-			  grep ld.so.1 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi	
-		rm -f dummy.s dummy
-		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
-	elif test "${UNAME_MACHINE}" = "mips" ; then
-	  cat >dummy.c <<EOF
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
-	else
-	  # Either a pre-BFD a.out linker (linux-gnuoldld)
-	  # or one that does not give us useful --help.
-	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	  # If ld does not provide *any* "supported emulations:"
-	  # that means it is gnuoldld.
-	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
-	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
-	  case "${UNAME_MACHINE}" in
-	  i?86)
-	    VENDOR=pc;
-	    ;;
-	  *)
-	    VENDOR=unknown;
-	    ;;
-	  esac
-	  # Determine whether the default compiler is a.out or elf
-	  cat >dummy.c <<EOF
-#include <features.h>
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#ifdef __ELF__
-# ifdef __GLIBC__
-#  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-#  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-#  endif
-# else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
-	fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
-    i?86:DYNIX/ptx:4*:*)
-	echo i386-sequent-sysv4
-	exit 0 ;;
-    i?86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
-	exit 0 ;;
-    i?86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit 0 ;;
-    pc:*:*:*)
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit 0 ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit 0 ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit 0 ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit 0 ;;
-    i?86:LynxOS:2.*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit 0 ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit 0 ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:*:6*)
-	echo mips-sony-newsos6
-	exit 0 ;;
-    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-cat >dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
-  printf ("vax-dec-bsd\n"); exit (0);
-#else
-  printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit 0 ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit 0 ;;
-    c34*)
-	echo c34-convex-bsd
-	exit 0 ;;
-    c38*)
-	echo c38-convex-bsd
-	exit 0 ;;
-    c4*)
-	echo c4-convex-bsd
-	exit 0 ;;
-    esac
-fi
-
-#echo '(Unable to guess system type)' 1>&2
-
-exit 1
--- a/config.sub
+++ b/config.sub
@@ -1,954 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-if [ x$1 = x ]
-then
-	echo Configuration name missing. 1>&2
-	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-	echo "or     $0 ALIAS" 1>&2
-	echo where ALIAS is a recognized configuration type. 1>&2
-	exit 1
-fi
-
-# First pass through any local machine types.
-case $1 in
-	*local*)
-		echo $1
-		exit 0
-		;;
-	*)
-	;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  linux-gnu*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple)
-		os=
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco5)
-		os=sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-		| arme[lb] | pyramid | mn10200 | mn10300 \
-		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
-		| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
-		| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
-		| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
-		| mipstx39 | mipstx39el \
-		| sparc | sparclet | sparclite | sparc64 | v850)
-		basic_machine=$basic_machine-unknown
-		;;
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i[3456]86)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
-	      | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
-	      | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
-	      | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
-	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-*  \
-	      | mipstx39-* | mipstx39el-* \
-	      | f301-*)
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-cbm
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-cbm
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-cbm
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	cray2)
-		basic_machine=cray2-cray
-		os=-unicos
-		;;
-	[ctj]90-cray)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[3456]86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i[3456]86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i[3456]86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i[3456]86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	mipsel*-linux*)
-		basic_machine=mipsel-unknown
-		os=-linux-gnu
-		;;
-	mips*-linux*)
-		basic_machine=mips-unknown
-		os=-linux-gnu
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-        pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pentium | p5)
-		basic_machine=i586-intel
-		;;
-	pentiumpro | p6)
-		basic_machine=i686-intel
-		;;
-	pentium-* | p5-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	k5)
-		# We don't have specific support for AMD's K5 yet, so just call it a Pentium
-		basic_machine=i586-amd
-		;;
-	nexen)
-		# We don't have specific support for Nexgen yet, so just call it a Pentium
-		basic_machine=i586-nexgen
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=rs6000-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-	        ;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-	        ;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-               basic_machine=f301-fujitsu
-               ;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	xmp)
-		basic_machine=xmp-cray
-		os=-unicos
-		;;
-        xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	mips)
-		if [ x$os = x-linux-gnu ]; then
-			basic_machine=mips-unknown
-		else
-			basic_machine=mips-mips
-		fi
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sparc)
-		basic_machine=sparc-sun
-		;;
-        cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-ns2 )
-	        os=-nextstep2
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-        *-gould)
-		os=-sysv
-		;;
-        *-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-        *-sgi)
-		os=-irix
-		;;
-        *-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f301-fujitsu)
-		os=-uxpv
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-vxsim* | -vxworks*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
--- a/configure.in
+++ b/configure.in
@@ -1,32 +1,72 @@
 dnl
-Mnl Configure script for the Gnome library
+dnl Configure script for the Gnome library
 dnl

 AC_INIT(copyright.txt)
 AM_CONFIG_HEADER(config.h)
 AC_CANONICAL_SYSTEM

+dnl This is required at several places
+AC_CHECK_PROG(ac_dc_found, dc, yes, no)
+if test x$ac_dc_found != xyes ; then
+AC_MSG_ERROR([
+*** The "dc" utility was not found on your system.
+***
+*** When using RedHat Linux, you need to install the "bc" package.
+***
+*** It is now part of the "bc" package, so you should look at
+*** ftp://ftp.gnu.org/pub/gnu/bc/ if you want to compile it yourself.
+***
+*** Other systems and distributions may also have it in their "bc" package,
+*** so if there's no "dc" one, please look for "bc".
+***])
+fi
+
 . $srcdir/LIBGTOP-VERSION
 AM_INIT_AUTOMAKE($PACKAGE, $VERSION)

 AC_SUBST(LIBGTOP_MAJOR_VERSION)
 AC_SUBST(LIBGTOP_MINOR_VERSION)
 AC_SUBST(LIBGTOP_MICRO_VERSION)
+AC_SUBST(LIBGTOP_INTERFACE_AGE)
+AC_SUBST(LIBGTOP_BINARY_AGE)
 AC_SUBST(LIBGTOP_SERVER_VERSION)
 AC_SUBST(LIBGTOP_VERSION)
+AC_SUBST(LIBGTOP_VERSION_CODE)
+AC_SUBST(LIBGTOP_VERSION_SUFFIX)

-AM_ACLOCAL_INCLUDE(macros)
+# libtool versioning
+LT_RELEASE=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION
+LT_CURRENT=`expr $LIBGTOP_MICRO_VERSION - $LIBGTOP_INTERFACE_AGE`
+LT_REVISION=$LIBGTOP_INTERFACE_AGE
+LT_AGE=`expr $LIBGTOP_BINARY_AGE - $LIBGTOP_INTERFACE_AGE`
+LT_VERSION_INFO='-version-info ${LT_CURRENT}:${LT_REVISION}:${LT_AGE}'
+AC_SUBST(LT_VERSION_INFO)
+AC_SUBST(LT_RELEASE)
+AC_SUBST(LT_CURRENT)
+AC_SUBST(LT_REVISION)
+AC_SUBST(LT_AGE)
+
+AM_ACLOCAL_INCLUDE(. macros)

 AC_ISC_POSIX
 AC_PROG_CC
 AC_STDC_HEADERS
 AC_ARG_PROGRAM

+dnl We need this at some places.
+libgtop_top_builddir=`pwd`
+AC_SUBST(libgtop_top_builddir)
+
 dnl We don't use `AC_PROG_AWK' since it checks for mawk first which
 dnl does not work for libgtop.
 AC_CHECK_PROGS(AWK, gawk awk, )
 test -z "$AWK" && AC_MSG_ERROR([Sorry, you need a working awk interpreter.])

+dnl Most people should have a working perl interpreter on their system
+AC_CHECK_PROGS(PERL, perl5 perl)
+test -z "$PERL" && AC_MSG_ERROR([You need to have a working perl interpreter.])
+
 AC_CHECK_TOOL(CC,gcc)
 AC_CHECK_TOOL(RANLIB,ranlib)
 AC_CHECK_TOOL(AS,as)
@@ -44,26 +84,43 @@ export cross_compiling

 AM_PROG_LIBTOOL

-dnl If you want to use libgtop without gnome, comment the following line out.
+dnl Let the user enable compiler warnings
+GNOME_COMPILE_WARNINGS
+
 GNOME_INIT_HOOK(gnome_found=yes)

 if test "x$gnome_found" != xyes; then
+  if test "x$want_gnome" != xno ; then
+    AC_MSG_ERROR([
+*** GNOME was not found on this system. ***
+
+*** If you want to use LibGTop without GNOME, you need
+*** to give configure the --without-gnome parameter.
+])
+  else
+    AC_DEFINE(WITHOUT_GNOME)
+  fi
  GNOME_SUPPORT_CHECKS
 else
-  AM_CONDITIONAL(BUILD_GNOME_SUPPORT, false)
-  AM_CONDITIONAL(CROSS_COMPILING, test "x$cross_compiling" = xyes)
+  if test "x$want_gnome" != xno ; then
+    AM_CONDITIONAL(BUILD_GNOME_SUPPORT, false)
+  else
+    GNOME_SUPPORT_CHECKS
+  fi
 fi

+AM_CONDITIONAL(CROSS_COMPILING, test "x$cross_compiling" = xyes)
+
 GNOME_LIBGTOP_SYSDEPS
 GNOME_LIBGTOP_TYPES

-GNOME_CHECK_GUILE
-
 AC_ARG_WITH(libgtop-guile,
-[  --with-libgtop-guile    Build the libgtop guile interface (default=yes)],
+[  --with-libgtop-guile    Build the libgtop guile interface (default=no)],
 [build_guile="$withval"], [build_guile=yes])

-test x$build_guile = xno && ac_cv_guile_found=no
+if test x$build_guile != xno ; then
+  GNOME_CHECK_GUILE
+fi

 AC_ARG_WITH(libgtop-inodedb,
 [  --with-libgtop-inodedb  Build the inodedb stuff (default=no)],
@@ -87,20 +144,44 @@ if test x$ac_cv_guile_found = xyes ; then
  AC_DEFINE(GLIBTOP_GUILE)
  AC_DEFINE(GLIBTOP_GUILE_NAMES)
  libgtop_guile_found=yes
-  guile_examples='third third_static'
+  guile_examples='third'
+  guile_static_examples='third_static'
  guile_subdirs='guile'
 else
  libgtop_guile_found=no
  guile_examples=
+  guile_static_examples=
  guile_subdirs=
 fi

+if test x$libgtop_smp = xyes ; then
+  smp_examples='smp'
+  smp_static_examples='smp_static'
+else
+  smp_examples=
+  smp_static_examples=
+fi
+
+if test "x$enable_static" != xno; then
+  static_targets="first_static second_static mountlist_static procmap_static netload_static sysdeps_static timings_static $guile_static_examples $smp_static_examples"
+else
+  static_targets=""
+fi
+
+AM_CONDITIONAL(ENABLE_STATIC, test x$enable_static = xyes)
+AM_CONDITIONAL(ENABLE_SHARED, test x$enable_static = xyes)
+
+AC_SUBST(static_targets)
+AC_SUBST(smp_examples)
 AC_SUBST(guile_examples)
 AC_SUBST(guile_subdirs)

 AM_PROG_LIBTOOL

-dnl You need to uncomment the following line if you want to use libgtop without Gnome.
+AM_PATH_GLIB(1.2.0,,AC_MSG_ERROR(GLIB >= 1.2.0 is required for LibGTop))
+
+dnl You need to uncomment the following line if you want to use
+dnl libGTop without Gnome.
 dnl GNOME_SUPPORT_CHECKS

 dnl Checks for typedefs, structures, and compiler characteristics.
@@ -119,11 +200,60 @@ AC_CHECK_TYPE(ssize_t, int)
 AC_CHECK_HEADERS(memory.h)
 AC_CHECK_HEADERS(string.h strings.h, break)
 AC_REPLACE_FUNCS(strerror)
-AC_CHECK_LIB(kvm, kvm_open)
+
+dnl dlopen() and dlsym()
+DL_LIB=
+AC_CHECK_FUNCS(dlopen,,[
+  AC_CHECK_LIB(dl, dlopen, DL_LIB="-ldl", [
+    AC_CHECK_LIB(dld, shl_load, DL_LIB="-ldld", [
+      AC_CHECK_FUNCS(dlopen, DL_LIB="", DL_LIB="")
+    ])
+  ])
+])
+oLIBS="$LIBS"
+LIBS="$LIBS $DL_LIB"
+AC_CHECK_FUNCS(dlerror,,)
+LIBS="$oLIBS"
+AC_SUBST(DL_LIB)
+
+dnl Solaris
+AC_CHECK_LIB(kstat, kstat_open)
+AC_CHECK_FUNCS(getloadavg swapctl)
+AC_CHECK_HEADERS(procfs.h sys/procfs.h, break)
+
+dnl Some versions of Solaris require -lelf for -lkvm
+AC_CHECK_LIB(kvm, kvm_open,[
+  LIBS="-lkvm $LIBS"
+],[AC_MSG_CHECKING(for kvm_open in -lkvm with -lelf)
+   AC_CACHE_VAL(ac_cv_lib_kvm_with_elf,
+   [ac_save_LIBS="$LIBS"
+    LIBS="-lkvm -lelf $LIBS"
+    AC_TRY_LINK([char kvm_open();], [kvm_open()],
+                ac_cv_lib_kvm_with_elf=yes, ac_cv_lib_kvm_with_elf=no)
+    LIBS="$ac_save_LIBS"
+   ])
+   if test "$ac_cv_lib_kvm_with_elf" = "yes"; then
+     AC_MSG_RESULT(yes)
+     LIBS="-lkvm -lelf $LIBS"
+   else
+     AC_MSG_RESULT(no)
+   fi
+])

 dnl For DEC OSF1
 AC_CHECK_LIB(mach, vm_statistics)

+dnl For some broken libc5 systems (Debian 1.3)                                                           
+saved_CFLAGS=$CFLAGS                                                                                     
+CFLAGS="$CFLAGS -D_GNU_SOURCE"                                                                           
+GCC_NEED_DECLARATION(program_invocation_name, [                           
+#include <errno.h>                                                                                       
+#include <stdio.h>                                                                                       
+#include <stdlib.h>                                                                                      
+#include <string.h>                                                                                      
+])                                                                                                       
+CFLAGS=$saved_CFLAGS                                                                                     
+                                                                                                         
 dnl Check for Internet sockets.
 AC_CHECK_FUNC(socket,
 [AC_CHECK_HEADER(netinet/in.h,
@@ -146,11 +276,18 @@ AC_TYPE_SIGNAL
 AC_FUNC_STRFTIME
 AC_CHECK_FUNCS(getcwd gettimeofday getwd putenv strdup strtoul uname)

-ALL_LINGUAS="fr"
-AM_GNU_GETTEXT
+dnl ## all 'es_??' are only needed for format numbers different of 'es'
+ALL_LINGUAS="az da de es es_DO es_GT es_HN es_MX es_PA es_PE es_SV fi fr gl ja ko nl no pl pt_BR sk sl sv"
+AM_GNOME_GETTEXT

 AC_PATH_XTRA

+dnl For Solaris
+dnl Please don't move this before AC_PATH_XTRA
+AC_CHECK_FUNC(gethostbyname,,[AC_CHECK_LIB(nsl,gethostbyname)])
+AC_CHECK_FUNC(connect,,[AC_CHECK_LIB(socket,connect)])
+AC_CHECK_FUNC(inet_aton,,[AC_CHECK_LIB(resolv,inet_aton)])
+
 dnl The construct foo=`echo $w1 $w2 $w3` fails on some systems if $w1 = -e or -n
 dnl So we use the following instead.
 dnl XE_SPACE(var, words)
@@ -162,7 +299,8 @@ $1="$T"

 dnl Autodetect Xauth
 dnl -lXau is only used by gnuclient, so use a special variable for Xauth X libs
-test -z "$with_xauth" && test "$window_system" = "none" && with_xauth=no
+saved_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="$CPPFLAGS $X_CFLAGS"
 test -z "$with_xauth" && { AC_CHECK_HEADER(X11/Xauth.h,          ,with_xauth=no) }
 test -z "$with_xauth" && { AC_CHECK_LIB(Xau, XauGetAuthByAddr,[:],with_xauth=no, $X_LIBS) }
 test -z "$with_xauth" && with_xauth=yes
@@ -170,40 +308,56 @@ if test "$with_xauth" = "yes"; then
  AC_DEFINE(HAVE_XAUTH)
  XE_SPACE(libs_xauth, $X_LIBS -lXau)
 fi
+CPPFLAGS="$saved_CPPFLAGS"
 AC_SUBST(libs_xauth)

 dnl For diskusage stuff
 GNOME_FILEUTILS_CHECKS

-AC_ARG_ENABLE(debug, [  --enable-debug          turn on debugging [default=no]],AC_DEFINE(GNOME_ENABLE_DEBUG),)
+dnl Debugging
+AC_ARG_ENABLE(debug, [  --enable-debug          turn on debugging [default=no]],AC_DEFINE(LIBGTOP_ENABLE_DEBUG),)
+AC_ARG_ENABLE(fatal-warnings, [  --enable-fatal-warnings make all warnings fatal [debug=no]],AC_DEFINE(LIBGTOP_FATAL_WARNINGS),)

-dnl If you want to use libgtop without gnome, uncomment the following paragraph:
-dnl LIBSUPPORT=
-dnl SUPPORTINCS=
-dnl if test "$need_gnome_support" = yes; then
-dnl    LIBSUPPORT='$(top_builddir)/support/libgnomesupport.la'
-dnl    SUPPORTINCS='-I$(top_srcdir)/support'
-dnl fi
-dnl AC_SUBST(LIBSUPPORT)
-dnl AC_SUBST(SUPPORTINCS)
-
-dnl Some ugly hack; if '-lgnomesupport' is part of $GNOME_LIBS, we include it here.
-echo "$GNOME_LIBS" | grep -q -e '-lgnomesupport'
-if test $? = 0 ; then
+if test "x$gnome_found" = xyes ; then
  LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
  SUPPORTINCS="$GNOME_INCLUDEDIR"
+else
+  LIBSUPPORT='$(top_builddir)/support/libgnomesupport.la'
+  SUPPORTINCS='-DNEED_GNOMESUPPORT_H -I$(top_builddir)/support -I$(top_srcdir)/support'
 fi
+
+dnl Some ugly hack; if '-lgnomesupport' is part of $GNOME_LIBS,
+dnl we include it here.
+case "$GNOME_LIBS" in
+	'*-lgnomesupport*' ) 
+	  LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
+          SUPPORTINCS="$GNOME_INCLUDEDIR" ;;
+esac
 AC_SUBST(LIBSUPPORT)
 AC_SUBST(SUPPORTINCS)

 dnl These definitions are expanded in make.
-LIBGTOP_LIBS='-L$(libdir) -lgtop'
+LIBGTOP_LIBS='-L$(libdir)'
 LIBGTOP_INCS='-I$(includedir)'

+if test x$libgtop_use_machine_h = xyes ; then
+  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_GLIBTOP_MACHINE_H"
+fi
+
 if test x$build_inodedb = xyes ; then
  LIBGTOP_INCS="$LIBGTOP_INCS -DGLIBTOP_INODEDB"
 fi

+if test x$libgtop_smp = xyes ; then
+  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_LIBGTOP_SMP"
+fi
+
+if test x$libgtop_have_sysinfo = xyes ; then
+  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_LIBGTOP_SYSINFO"
+fi
+
+LIBGTOP_INCS="$LIBGTOP_INCS $SUPPORTINCS $GLIB_CFLAGS"
+
 LIBGTOP_GUILE_LIBS="$LIBGTOP_LIBS"
 LIBGTOP_GUILE_INCS="$LIBGTOP_INCS"
 LIBGTOP_BINDIR='$(bindir)'
@@ -221,18 +375,19 @@ fi

 AC_SUBST(libgtop_guile_found)

-if test -z $LIBGTOP_EXTRA_LIBS ; then
+if test -z "$LIBGTOP_EXTRA_LIBS" ; then
  LIBGTOP_EXTRA_LIBS="$libs_xauth"
 else
  LIBGTOP_EXTRA_LIBS="$LIBGTOP_EXTRA_LIBS $libs_xauth"
 fi

-LIBGTOP_LIBS="$LIBGTOP_LIBS -lgtop_common -lgtop_sysdeps"
-LIBGTOP_GUILE_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_common -lgtop_sysdeps"
+LIBGTOP_EXTRA_LIBS="$LIBGTOP_EXTRA_LIBS $GLIB_LIBS"
+
+LIBGTOP_LIBS="$LIBGTOP_LIBS -lgtop -lgtop_sysdeps -lgtop_common"
+LIBGTOP_GUILE_LIBS="$LIBGTOP_GUILE_LIBS -lgtop -lgtop_sysdeps -lgtop_common"

 LIBGTOP_NAMES_LIBS="$LIBGTOP_LIBS -lgtop_names"
-LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_guile_names"
-LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_names"
+LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_guile_names -lgtop_names"

 LIBGTOP_LIBS="$LIBGTOP_LIBS" 
 LIBGTOP_NAMES_LIBS="$LIBGTOP_NAMES_LIBS"
@@ -256,7 +411,7 @@ else
  guile_def=""
 fi

-INCLUDES="$CFLAGS -D_IN_LIBGTOP -D_GNU_SOURCE -DGLIBTOP_NAMES $guile_def -I\$(top_builddir) -I\$(top_srcdir) -I\$(top_srcdir)/sysdeps/$sysdeps_dir -I\$(top_srcdir)/include -I\$(top_srcdir)/intl "'-DGTOPLOCALEDIR=\"$(datadir)/locale\" -DLIBGTOP_VERSION=\"'"$LIBGTOP_VERSION"'\" -DLIBGTOP_SERVER_VERSION=\"'"$LIBGTOP_SERVER_VERSION"'\" -DLIBGTOP_SERVER=\"'"$LIBGTOP_SERVER"'\"'
+INCLUDES="-D_IN_LIBGTOP -D_GNU_SOURCE -DGLIBTOP_NAMES -I\$(top_builddir) -I\$(top_srcdir) -I\$(top_srcdir)/sysdeps/$sysdeps_dir -I\$(top_srcdir)/include -I\$(top_srcdir)/intl $SUPPORTINCS $GLIB_CFLAGS $CFLAGS $X_CFLAGS $guile_def "'-DGTOPLOCALEDIR=\"$(datadir)/locale\" -DLIBGTOP_VERSION=\"'"$LIBGTOP_VERSION"'\" -DLIBGTOP_SERVER_VERSION=\"'"$LIBGTOP_SERVER_VERSION"'\" -DLIBGTOP_VERSION_CODE='$LIBGTOP_VERSION_CODE' -DLIBGTOP_SERVER=\"'"$LIBGTOP_SERVER"'\"'

 AC_SUBST(INCLUDES)

@@ -273,18 +428,6 @@ AC_SUBST(LIBGTOP_GUILE_NAMES_INCS)
 AC_SUBST(LIBGTOP_BINDIR)
 AC_SUBST(LIBGTOP_SERVER)

-LIBSUPPORT=
-SUPPORTINCS=
-if test "$need_gnome_support" = yes; then
-   if test "x$gnome_found" = xyes ; then
-     LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
-     SUPPORTINCS="$GNOME_INCLUDEDIR"
-   else
-     LIBSUPPORT='$(top_builddir)/support/libgnomesupport.la'
-     SUPPORTINCS='-DNEED_GNOMESUPPORT_H -I$(top_builddir)/support -I$(top_srcdir)/support'
-   fi
-fi
-
 if test x$libgtop_need_server = xyes ; then
   sysdeps_suid_lib="\$(top_builddir)/sysdeps/\$(sysdeps_dir)/libgtop_sysdeps_suid.la"
   server_programs='libgtop_server'
@@ -297,8 +440,10 @@ AC_SUBST(server_programs)

 AC_OUTPUT([
 Makefile
+libgtop.spec
 po/Makefile.in
 intl/Makefile
+misc/Makefile
 include/Makefile
 include/glibtop/Makefile
 sysdeps/Makefile
@@ -313,12 +458,12 @@ sysdeps/osf1/Makefile
 sysdeps/linux/Makefile
 sysdeps/kernel/Makefile
 sysdeps/freebsd/Makefile
+sysdeps/solaris/Makefile
 src/Makefile
 src/daemon/Makefile
 src/inodedb/Makefile
 lib/Makefile
-guile/Makefile
 examples/Makefile
-perl/Makefile.PL
+doc/Makefile
 support/Makefile
-macros/Makefile],[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile])
+macros/Makefile])
--- a/copyright.txt
+++ b/copyright.txt
@@ -1,21 +1,23 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

--- a/debian/.cvsignore
+++ b/debian/.cvsignore
@@ -0,0 +1,9 @@
+control
+rules
+build
+tmp
+*.postinst
+*.debhelper
+*.files
+files
+substvars
--- a/debian/README.Debian
+++ b/debian/README.Debian
@@ -0,0 +1,9 @@
+LibGTop CVS snapshots for Debian
+--------------------------------
+
+This is a debian package made from a stable release of LibGTop, but it
+should be considered "unofficial" since I'm not a Debian Maintainer.
+
+
+Martin Baulig <martin@home-of-linux.org>, Wed, 16 Feb 2000 16:40:50 +0100
+
--- a/debian/changelog
+++ b/debian/changelog
@@ -0,0 +1,121 @@
+libgtop (1.0.7-1) unstable; urgency=low
+  * New upstream source (1.0.7 "Copenhagen" release)
+  * Non-maintainer upload; since I'm not a Debian maintainer, this is some
+    kind of "unofficial" debian package for LibGTop 1.0.7 - but I think it
+    can be considered stable and working.
+
+ -- Martin Baulig <martin@home-of-linux.org>  Wed, 16 Feb 2000 16:40:50 +0100
+
+libgtop (1.0.6-1) unstable; urgency=low
+  * New upstream source
+
+ -- Ian Lynagh (wibble) <igloo@debian.org>  Wed, 20 Oct 1999 16:16:27 +0100
+
+libgtop (1.0.4.5pre1-1) frozen unstable; urgency=low
+  * New upstream source (1.0.5 pre release)
+  * Maintainer e-mail address changed to igloo@debian.org
+
+ -- Ian Lynagh (wibble) <igloo@debian.org>  Thu, 30 Sep 1999 22:37:33 +0100
+
+libgtop (1.0.4-1) frozen unstable; urgency=low
+  * New upstream source
+  * Removed nasty sed stuff from the rules in favour of make install prefix=...
+  * Added .la files to libgtop-dev
+  * Added info to the copyright file
+  * Wrote simple man page for libgtop-config.
+  * Recompiled with later debhelper so docs go to /usr/share/doc as per FHS
+  * changed infodir to /usr/share/info
+
+ -- Ian Lynagh (wibble) <igloo@debian.org>  Mon, 20 Sep 1999 00:06:16 +0100
+
+libgtop (1.0.1-2) frozen unstable; urgency=low
+
+  * Didn't actually use wildcards in libgtop-dev.files because tar complained
+  * Set section names properly
+
+ -- Ian Lynagh <ian@lynagh.demon.co.uk>  Sun,  7 Mar 1999 00:53:50 +0000
+
+libgtop (1.0.1-1) frozen unstable; urgency=low
+
+  * SONAME changed back to 1. Fun fun fun.
+  * Added RELNOTES-1.0 to debian/libgtop1.docs and debian/rules
+  * Changed libgtop1.README.Debian to at least make sense
+  * Used wildcards in libgtop-dev.files
+
+ -- Ian Lynagh <ian@lynagh.demon.co.uk>  Sun,  7 Mar 1999 00:53:50 +0000
+
+libgtop (1.0.1-0.1) unstable; urgency=low
+
+  * Non-maintainer upload for GNOME 1.0
+
+ -- Jules Bean <jules@debian.org>  Thu,  4 Mar 1999 22:34:12 +0000
+
+libgtop (0.99.2-0.2) unstable; urgency=low
+
+  * Oops, forgot some files.
+
+ -- Jim Pick <jim@jimpick.com>  Sun, 24 Jan 1999 02:12:24 -0800
+
+libgtop (0.99.2-0.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * New upstream source.
+  * SONAME is now 0 again.  Hmmm.
+
+ -- Jim Pick <jim@jimpick.com>  Sat, 23 Jan 1999 20:21:38 -0800
+
+libgtop (0.26.2-4) frozen unstable; urgency=low
+
+  * Upstream changelog installed as changelog
+  * debian/shlibs.local removed in favour of the LD_LIBRARY_PATH line
+
+ -- Ian Lynagh <ian@lynagh.demon.co.uk>  Thu, 26 Nov 1998 17:20:24 +0000
+
+libgtop (0.26.2-3.1) frozen unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Upload to frozen, corrects Bug #29110, Bug #29111, which were
+    already fixed.
+  * Noticed that guile option is no longer being used, so I removed
+    the dependency.
+  * Added changelog (to fix lintian error).
+  * Changed control file to use macro substitutions.  This is a much
+    less error-prone way of building dependencies than doing them by
+    hand.
+  * Added -V option to dh_makeshlibs to put version number on shlibs
+    file.
+  * Added shlibs.local file with null entry for "libgtop 1" (and
+    others) so libgtop1 doesn't declare a relationship on itself.
+
+ -- Jim Pick <jim@jimpick.com>  Wed, 25 Nov 1998 12:03:12 -0800
+
+libgtop (0.26.2-3) frozen unstable; urgency=low
+
+  * libgtop0 changed to libgtop1
+  * Added an #ifndef strstr around the prototype of strstr in
+    sysdeps/common/mountlist.c as this is a macro under glibc 2.1.
+
+ -- Ian Lynagh <ian@lynagh.demon.co.uk>  Sun,  8 Nov 1998 12:06:09 +0000
+
+libgtop (0.26.2-2) frozen unstable; urgency=low
+
+  * Fixes minor bugs in debian/rules
+
+ -- Ian Lynagh <ian@lynagh.demon.co.uk>  Fri, 16 Oct 1998 05:30:16 +0200
+
+libgtop (0.26.2-1) unstable; urgency=low
+
+  * New upstream version
+  * Non-maintainer release
+
+ -- Martin Schulze <joey@finlandia.infodrom.north.de>  Fri, 16 Oct 1998 05:30:16 +0200
+
+libgtop (0.26.0-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Jim Pick <jim@jimpick.com>  Thu, 24 Sep 1998 18:42:48 -0700
+
+Local variables:
+mode: debian-changelog
+End:
--- a/debian/control.in
+++ b/debian/control.in
@@ -0,0 +1,33 @@
+Source: libgtop@SUFFIX@
+Maintainer: Martin Baulig <martin@home-of-linux.org>
+Section: libs
+Priority: optional
+Standards-Version: 3.0.0
+
+Package: libgtop1@SUFFIX@
+Architecture: any
+Section: libs
+Depends: ${shlibs:Depends}
+Description: Portable system access library (part of Gnome)
+ Gnome is the "GNU Network Object Model Environment"
+ .
+ It is a project to build a complete, user-friendly desktop based
+ entirely on free software.
+ .
+ This package contains the gtop libraries which read information about
+ processes and the running systems.
+
+Package: libgtop-dev@SUFFIX@
+Architecture: any
+Section: devel
+Depends: libgtop1@SUFFIX@ (= ${Source-Version})
+Description: Dev libraries for the portable system access library (part of Gnome)
+ Gnome is the "GNU Network Object Model Environment"
+ .
+ It is a project to build a complete, user-friendly desktop based
+ entirely on free software.
+ .
+ This package contains the include files and static library for the
+ gtop libraries which read information about processes and the running
+ systems.
+
--- a/debian/debconfigure
+++ b/debian/debconfigure
@@ -0,0 +1,109 @@
+#! /bin/sh
+#
+# debconfigure
+#
+# A script to generate a debian/rules file, with options.
+#
+# By Jim Pick <jim@jimpick.com>, GPL'd of course.
+# Adjusted for LibGTop by Martin Baulig <martin@home-of-linux.org>
+#
+
+if [ ! -r rules.in ]; then
+	echo "Please run the debconfigure script in the debian directory" 1>&2
+	exit 1
+fi
+
+debtype='official'
+prefix='/usr'
+gnomeprefix='/usr'
+localstatedir='/var/lib'
+pkgsuffix=''
+
+for dc_option
+do
+    case "$dc_option" in
+	-*=*) dc_optarg=`echo "$dc_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+	*) dc_optarg= ;;
+    esac
+
+    case "$dc_option" in
+
+	--clean)
+	    rm -f control rules *~ core *files *menu *substvars *.postinst *.debhelper
+	    exit ;;
+
+	--prefix=*)
+	    prefix="$dc_optarg" ;;
+
+        --localstatedir=*)
+	    prefix="$dc_optarg" ;;
+
+	--pkgsuffix=*)
+	    pkgsuffix="$dc_optarg" ;;
+
+	--gnome-prefix=*)
+	    gnomeprefix="$dc_optarg" ;;
+
+	--debtype=*)
+	    debtype="$dc_optarg" ;;
+
+	*)
+	    cat <<EOF 1>&2
+Usage: debconfigure [options]
+Options: [defaults in brackets after descriptions]
+  --help                  print this message
+  --clean		  remove generated files
+  --prefix=PREFIX         install files under under PREFIX dir [/usr]
+  --gnome-prefix=PREFIX   look for GNOME under PREFIX dir [/usr]
+  --localstatedir=DIR     directory for things like game scores [/var/lib]
+  --pkgsuffix=SUFFIX      append SUFFIX onto package names []
+  --debtype=DEBTYPE       enable macros with the name of DEBTYPE [official]
+EOF
+	    exit ;;
+
+    esac
+done
+
+# Strip leading slash
+prefix=`expr $prefix : '/\(.*\)'`
+gnomeprefix=`expr $gnomeprefix : '/\(.*\)'`
+localstatedir=`expr $localstatedir : '/\(.*\)'`
+
+for infile in `ls control.in rules.in`
+do
+    tofile=`expr $infile : '\(.*\)\.in'`
+    cat $infile | \
+       sed "s,@SUFFIX@,$pkgsuffix,g" | \
+       sed "s,@PREFIX@,$prefix,g" | \
+       sed "s,@GNOMEPREFIX@,$gnomeprefix,g" | \
+       sed "s,@LOCALSTATEDIR@,$localstatedir,g" | \
+       sed "s,%$debtype>,," | sed '/^%/d' > $tofile
+done
+chmod +x rules
+
+for filesfile in `ls *.files.in`
+do
+    tofile=`expr $filesfile : '\(.*\)\.files\.in'`
+    tofile=`echo $tofile$pkgsuffix.files`
+    cat $filesfile | \
+       sed "s,@SUFFIX@,$pkgsuffix,g" | \
+       sed "s,@PREFIX@,$prefix,g" | \
+       sed "s,@GNOMEPREFIX@,$gnomeprefix,g" | \
+       sed "s,@LOCALSTATEDIR@,$localstatedir,g" | \
+       sed "s,%$debtype>,," | sed '/^%/d' > $tofile
+done
+
+for postinst in libgtop1$pkgsuffix
+do
+
+cat > $postinst.postinst <<EOF
+#! /bin/sh
+
+set -e
+ldconfig
+
+#DEBHELPER#
+EOF
+
+done
+
--- a/debian/libgtop-config.1
+++ b/debian/libgtop-config.1
@@ -0,0 +1,34 @@
+.TH GTOP l "15 September 1999"
+.SH NAME
+\fBlibgtop-config\fP \- libgtop libraries and component information retrieval.
+.SH SYNTAX
+.B libgtop-config
+.RI [ --version ]
+.RI [ --config ]
+.RI [ --features-def-file ]
+.SH DESCRIPTION
+.B libgtop-config
+is used to retrieve information from installed libraries in the system.
+
+This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.
+.LP
+.SH OPTIONS
+.TP
+.B \-\-version
+.PD
+Prints the version of libgtop that you're using.
+.TP
+.B \-\-config
+.PD
+Prints the location of libgtopConf.sh.
+.TP
+.B \-\-version
+.PD
+Prints the location of libgtop-features.def.
+.SH BUGS
+None known
+
+.SH AUTHORS
+Martin Baulig (martin@home-of-linux.org)
+.TP
+Josh Sled (jsled@scam.XCF.Berkeley.EDU)
--- a/debian/libgtop-dev.files.in
+++ b/debian/libgtop-dev.files.in
@@ -0,0 +1,24 @@
+@PREFIX@/lib/libgtop.a
+@PREFIX@/lib/libgtop_common.a
+@PREFIX@/lib/libgtop_names.a
+@PREFIX@/lib/libgtop_suid_common.a
+@PREFIX@/lib/libgtop_sysdeps.a
+@PREFIX@/lib/libgtop.la
+@PREFIX@/lib/libgtop_common.la
+@PREFIX@/lib/libgtop_names.la
+@PREFIX@/lib/libgtop_suid_common.la
+@PREFIX@/lib/libgtop_sysdeps.la
+@PREFIX@/lib/libgtopConf.sh
+@PREFIX@/lib/libgtop.so
+@PREFIX@/lib/libgtop_common.so
+@PREFIX@/lib/libgtop_names.so
+@PREFIX@/lib/libgtop_suid_common.so
+@PREFIX@/lib/libgtop_sysdeps.so
+@PREFIX@/lib/libgtop-features.def
+@PREFIX@/lib/libgtop/include/*.h
+@PREFIX@/include/glibtop/*.h
+@PREFIX@/include/glibtop.h
+@PREFIX@/include/glibtop_server.h
+@PREFIX@/include/glibtop_machine.h
+@PREFIX@/info/libgtop.info
+@PREFIX@/bin/libgtop-config
--- a/debian/libgtop1.README.Debian
+++ b/debian/libgtop1.README.Debian
@@ -0,0 +1,5 @@
+
+The Debian package of libgtop, a GNOME library.
+
+-- 
+Martin Baulig <martin@home-of-linux.org>
--- a/debian/libgtop1.copyright
+++ b/debian/libgtop1.copyright
@@ -0,0 +1,12 @@
+
+libgtop is released under the GPL.
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in /usr/share/common-licenses/GPL
+
+Original authors: Martin Baulig <martin@home-of-linux.org>
+                  Drazen Kacar <dave@srce.hr>
+
+Originally Debianised by Jim Pick <jim@jimpick.com>
+Then re-Debianised in October 1998 by Martin Schulze
+<joey@finlandia.infodrom.north.de> before being taken over by Ian Lynagh
+<ian@lynagh.demon.co.uk> in November 1998.
--- a/debian/libgtop1.docs
+++ b/debian/libgtop1.docs
@@ -0,0 +1,5 @@
+RELNOTES-0.25
+RELNOTES-1.0.x
+NEWS
+AUTHORS
+debian/changelog
--- a/debian/libgtop1.files.in
+++ b/debian/libgtop1.files.in
@@ -0,0 +1,4 @@
+@PREFIX@/lib/libgtop*.so.[0-9].[0-9][0-9].[0-9]
+@PREFIX@/lib/libgtop*.so.[0-9].[0-9].[0-9]
+@PREFIX@/lib/libgtop*.so.[0-9]
+@PREFIX@/share/locale/*/*/libgtop.mo
--- a/debian/rules.in
+++ b/debian/rules.in
@@ -0,0 +1,115 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
+# This version is for a hypothetical package that builds an
+# architecture-dependant package, as well as an architecture-independent
+# package.
+
+# Uncomment this to turn on verbose mode. 
+#export DH_VERBOSE=1
+
+i=$(shell pwd)/debian/tmp
+b=$(shell pwd)/debian/build
+
+configure: configure.in
+	@echo "--- Making configure script and configuring"
+	chmod +x autogen.sh
+	./autogen.sh --prefix=/@PREFIX@ --with-gnome=/@GNOMEPREFIX@ \
+	  --localstatedir=/@LOCALSTATEDIR@
+
+Makefile: configure
+	@echo "--- Configuring"
+	./configure --prefix=/@PREFIX@ --with-gnome=/@GNOMEPREFIX@ \
+	  --localstatedir=/@LOCALSTATEDIR@
+
+build: configure Makefile build-debstamp
+build-debstamp:
+	@echo "--- Compiling"
+	dh_testdir
+	$(MAKE) all
+	touch build-debstamp
+
+clean: Makefile
+	@echo "--- Cleaning"
+	dh_testdir
+	dh_clean
+	-rm -rf static shared
+	-rm -f build-debstamp install-debstamp
+	-make -k distclean
+	-rm -f `find . -name "*~"`
+	-rm -f `find . -name "*\.la"`
+	-rm -rf `find . -name "\.deps"`
+	-rm -rf `find . -name "\.libs"`
+	-rm -rf `find . -name "*\.rej"`
+	-rm -rf debian/tmp `find debian/* -type d ! -name CVS` debian/files* core
+	-rm -f debian/*substvars
+
+install: build install-debstamp
+install-debstamp:
+	@echo "--- Installing"
+	dh_testdir
+	dh_testroot
+	rm -rf $(b)
+	$(MAKE) install prefix=$(i)/@PREFIX@ exec_prefix=$(i)/@PREFIX@ \
+	  localstatedir=$(i)/@LOCALSTATEDIR@
+	touch install-debstamp
+
+install-save: install
+	rm -rf $(i).saved
+	cp -a $(i) $(i).saved
+
+install-saved:
+	rm -rf $(i)
+	cp -a $(i).saved $(i)
+	rm -rf $(b)
+	touch install-debstamp
+
+binary-indep: build install
+
+binary-arch: build install \
+		libgtop1@SUFFIX@ \
+		libgtop-dev@SUFFIX@
+
+#
+# libgtop1@SUFFIX@
+#
+
+libgtop1@SUFFIX@: install
+	@echo "--- Building: $@"
+	dh_installdocs       -p$@ -P$(b)/$@ README NEWS AUTHORS
+	dh_installchangelogs -p$@ -P$(b)/$@ ChangeLog
+	dh_movefiles         -p$@ -P$(b)/$@
+	dh_strip             -p$@ -P$(b)/$@ 
+	dh_compress          -p$@ -P$(b)/$@ 
+	dh_fixperms          -p$@ -P$(b)/$@ 
+	dh_installdeb        -p$@ -P$(b)/$@
+	dh_shlibdeps         -p$@ -P$(b)/$@
+	dh_gencontrol        -p$@ -P$(b)/$@
+	dh_makeshlibs        -p$@ -P$(b)/$@ -V
+	dh_md5sums           -p$@ -P$(b)/$@
+	dh_builddeb          -p$@ -P$(b)/$@
+
+#
+# libgtop-dev
+#
+
+libgtop-dev@SUFFIX@: install
+	@echo "--- Building: $@"
+	mkdir -p $(b)/$@/usr/doc
+	cd $(b)/$@/usr/doc; ln -s libgtop1@SUFFIX@ $@	
+	dh_movefiles         -p$@ -P$(b)/$@
+	dh_strip             -p$@ -P$(b)/$@ 
+	dh_compress          -p$@ -P$(b)/$@ 
+	dh_fixperms          -p$@ -P$(b)/$@ 
+	dh_installdeb        -p$@ -P$(b)/$@
+	dh_shlibdeps         -p$@ -P$(b)/$@
+	dh_gencontrol        -p$@ -P$(b)/$@
+	dh_makeshlibs        -p$@ -P$(b)/$@ -V
+	dh_undocumented      -p$@ -P$(b)/$@ \
+				libgtop-config.1
+	dh_md5sums           -p$@ -P$(b)/$@
+	dh_builddeb          -p$@ -P$(b)/$@
+
+binary: binary-indep binary-arch
+.PHONY: binary clean binary-indep binary-arch build install install-save install-saved
+
+
--- a/doc/.cvsignore
+++ b/doc/.cvsignore
@@ -1,10 +0,0 @@
-*.shml
-*.ced
-.timestamp
-.timestamp2
-.timestamp3
-.timestamp4
-gnome-hackers
-libgtop
-libgtop-ref
-table
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,18 +0,0 @@
-1998-08-12  Martin Baulig  <martin@home-of-linux.org>
-
-	* features: New directory.
-	* gnome-hackers.sgml: Updated documentation.
-
-1998-08-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* gnome-hackers.sgml: Updated documentation.
-	* autoconf.sgml: New file, included from `gnome-hackers.sgml'.
-
-1998-07-21  Martin Baulig  <martin@home-of-linux.org>
-
-	* gnome-hackers.sgml: Added note that this file is
-	currently out of date and a link to the documentation
-	of the table () function.
-
-	* table.sgml: New file - basic documentation for the
-	table () system call.
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -1,39 +0,0 @@
-all:	.timestamp .timestamp2 .timestamp3 .timestamp4
-
-clean:
-	-rm -f .timestamp*
-	-rm -rf libgtop gnome-hackers libgtop-ref table
-
-.timestamp:	libgtop.sgml
-	-rm -rf libgtop
-	mkdir libgtop
-	-rm -f .timestamp
-	jade -D /usr/lib/sgml -d libgtop.dsl -t sgml \
-		-V %no-make-index% libgtop.sgml > /dev/null && \
-		touch .timestamp
-
-.timestamp2:	gnome-hackers.sgml autoconf.sgml ../guile/reference.sgml \
-	features/uptime.sgml features/uptime.txt features/proclist.sgml \
-	features/procmem.sgml
-	-rm -rf gnome-hackers
-	mkdir gnome-hackers
-	-rm -f .timestamp2
-	jade -D /usr/lib/sgml -d gnome-hackers.dsl -t sgml \
-		-V %no-make-index% gnome-hackers.sgml > /dev/null && \
-		touch .timestamp2
-
-.timestamp3:	libgtop-ref.sgml ../guile/reference.sgml
-	-rm -rf libgtop-ref
-	mkdir libgtop-ref
-	-rm -f .timestamp3
-	jade -D /usr/lib/sgml -d libgtop-ref.dsl -t sgml \
-		-V %no-make-index% libgtop-ref.sgml > /dev/null && \
-		touch .timestamp3
-
-.timestamp4:	table.sgml
-	-rm -rf table
-	mkdir table
-	-rm -f .timestamp4
-	jade -D /usr/lib/sgml -d table.dsl -t sgml \
-		-V %no-make-index% table.sgml > /dev/null && \
-		touch .timestamp4
--- a/doc/about.texi
+++ b/doc/about.texi
@@ -0,0 +1,122 @@
+@node About, White Paper, Top, Top
+@chapter About LibGTop
+
+LibGTop is a library to get system specific data such as CPU and Memory Usage
+and information about running Processes.
+
+On Systems like Solaris or Digital Unix where you need special privileges to
+get those data, it uses a setuid/setgid server to do so.
+
+Even if LibGTop is a part of the GNOME desktop environment
+(@uref{http://www.gnome.org}), the main interface of LibGTop is totally
+independent from any particular desktop environment, so you can also use it
+as a standalone library in any piece of GPLed software.
+
+@menu
+* Availability::                Where to get LibGTop
+* Supported Platforms::         Supported Platforms
+* Mailing List::                Helping with LibGTop development
+* Thanks::                      People who contributed to LibGTop
+@end menu
+
+@node Availability, Supported Platforms, About, About
+@section Availability
+
+The master source of LibGTop is the GNOME CVS tree
+(see @uref{http://www.gnome.org} for details), but you can also get the
+latest release tarballs from
+
+@display
+@uref{ftp://ftp.gnome.org/pub/GNOME/sources/libgtop/}
+@end display
+
+@noindent
+or any of its mirror sites.
+
+The latest stable version of LibGTop is 1.0.1 which is also the one that comes
+together with GNOME 1.0. In CVS, there is a @code{LIBGTOP_STABLE_1_0} branch
+which is rooted at the @code{LIBGTOP_1_0_1} tag while actual development occurs
+in the @code{HEAD} which currently has version 1.1.0.
+
+@node Supported Platforms, Mailing List, Availability, About
+@section Supported Platforms
+
+The stable branch currently supports the following platforms:
+
+@itemize @bullet
+@item All versions of Linux
+
+LibGTop was tested under Linux 2.0.x and 2.2.x on the ix86 and the alpha, but
+it should also work without problems on SparcLinux.
+
+Note: I'm speaking of the Linux kernel here, not the GNU/Linux operating system.
+
+@item FreeBSD, NetBSD and OpenBSD
+
+LibGTop was tested under FreeBSD 2.2.6 and 3.0, NetBSD 1.3.2 and OpenBSD 2.4.
+Support for NetBSD 1.4 was added in LibGTop 1.0.2.
+
+@end itemize
+
+The platforms listed above are known to be stable and working. However, if
+you're using the latest development version, you can use it on the following
+platforms as well:
+
+@itemize @bullet
+@item BSD/OS
+
+There is a port for BSD/OS (aka BSDI) 2.x and 3.x from Timur Bakeyev which
+should also work with 4.x. This isn't tested very well, but it should be
+working.
+
+@item Digital Unix
+
+There is some basic support for Digital Unix (formerly DEC OSF/1) V3.2C, but
+this may still be a bit unstable. I'm currently working on this port as time
+permits so it should be fully supported soon.
+
+@item Solaris
+
+The Solaris port currently works on Solaris 7 and maybe also on other releases.
+Thanks a lot to Drazen Kacar and everyone who helped working on this port. They
+have really done excellent work here and I'm pretty sure that this port will be
+fully functional on most Solaris versions in near future.
+
+@end itemize
+
+@node Mailing List, Thanks, Supported Platforms, About
+@section Mailing List
+
+There is a @email{libgtop-devel-list@@egroups.com} mailing list for people who
+want to help with the development of LibGTop.
+
+It is meant as a low-traffic, but high content-list where we can discuss
+technical details such as adding new sysdeps ports etc. 
+
+Especially, I'd like to see people with a deeper knowledge of operating systems
+internals joining my list so we can discuss technical details of the sysdeps
+code. 
+
+It is *not* for users that want to know how to compile LibGTop etc.
+
+You can subscribe to this mailing list and view the mailing list archives
+on the LibGTop Page at @uref{http://www.home-of-linux.org/gnome/libgtop}.
+
+@node Thanks,  , Mailing List, About
+@section Thanks
+
+At the place I'd like to thank the following people who contributed to
+LibGTop (listed in chronological order):
+
+@itemize @bullet
+@item Sebastian Wilhelmi who had the initial idea of LibGTop and helped
+me a lot in the early beginning.
+@item Josh Sled for the initial FreeBSD port.
+@item Jeremy Lea for his BSD patches.
+@item Timur Bakeyev for the BSDI port.
+@item Drazen Kacar and the other people on the LibGTop development mailing
+list for the Solaris port.
+@item All people sending me patches, having good ideas, ...
+@item Everyone I have forgotten in this list ...
+@end itemize
+
--- a/doc/autoconf.sgml
+++ b/doc/autoconf.sgml
@@ -1,253 +0,0 @@
-  <sect1 id="macros">
-    <title>Autoconf macros</title>
-
-    <para>
-      All you need to check for &libgtop; is in &gnome-libgtop-check.m4;,
-      just use <function>GNOME_INIT_LIBGTOP</function> with an optional
-      <parameter>fail</parameter> argument in the same way like
-      <function>GNOME_INIT</function>:
-
-      <example>
-	<title>Warn if &libgtop; cannot be found</title>
-
-	<programlisting>GNOME_INIT_LIBGTOP</programlisting>
-      </example>
-
-      <example>
-	<title>Abort if &libgtop; cannot be found</title>
-
-	<programlisting>GNOME_INIT_LIBGTOP(fail)</programlisting>
-      </example>
-
-    <para>
-      This will define a <function>HAVE_LIBGTOP</function> automake
-      conditional and everything from the configuration script of
-      &libgtop;.
-
-  <sect1 id="libgtopConf.sh">
-    <title>The configuration script of &libgtop; (&libgtopConf.sh;)</title>
-
-    <para>
-      After a successful build of &libgtop;, a &libgtopConf.sh; script
-      containing useful configuration variables is created.
-
-    <para>
-      It defines the following variables which you can use in your
-      <filename>Makefile.am</filename>:
-
-      <variablelist>
-	<varlistentry>
-	  <term><parameter>LIBGTOP_LIBDIR</parameter></term>
-	  <listitem>
-
-	    <para>
-	      The directory where the library files of &libgtop; are installed.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_INCLUDEDIR</parameter></term>
-	  <listitem>
-
-	    <para>
-	      The directory where the header files of &libgtop; are installed.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_LIBS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to link your program with &libgtop;.
-	      
-	<varlistentry>
-	  <term><parameter>LIBGTOP_INCS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to get the header files for &libgtop;.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_NAMES_LIBS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to link your program with &libgtop; and its
-	      names interface.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_NAMES_INCS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to get the header files for &libgtop; and the
-	      required <literal>-DGLIBTOP_NAMES</literal> to get its
-	      names interface.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_GUILE_LIBS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to link your program with &libgtop; and its
-	      guile interface. This will also include all the required
-	      guile libraries.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_GUILE_INCS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to get the header files for &libgtop; and guile
-	      and the required <literal>-DGLIBTOP_GUILE</literal> to get
-	      the guile interface of &libgtop;.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_GUILE_NAMES_LIBS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to link your program with &libgtop; and both its
-	      names and its guile interface. This will also include all the
-	      required guile libraries.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_GUILE_NAMES_INCS</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Use this to get the header files for &libgtop;, its guile
-	      and its names interface, the guile header files and the
-	      required <literal>-DGLIBTOP_GUILE</literal> and
-	      <literal>-DGLIBTOP_NAMES</literal>.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_BINDIR</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      The directory where the binaries of &libgtop; are installed.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_SERVER</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Full pathname of the &libgtop; server.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_MAJOR_VERSION</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Major version of &libgtop;.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_MINOR_VERSION</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Minor version of &libgtop;.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_VERSION</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Full version of &libgtop;.
-
-	<varlistentry>
-	  <term><parameter>LIBGTOP_SERVER_VERSION</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Version of the &libgtop; server. This is incremented each
-	      time the client/server protocol changes.
-
-	<varlistentry>
-	  <term><parameter>libgtop_sysdeps_dir</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      The sysdeps directory that is used on your system.
-
-	<varlistentry>
-	  <term><parameter>libgtop_need_server</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Either <literal>yes</literal> or <literal>no</literal>.
-
-	<varlistentry>
-	  <term><parameter>libgtop_use_machine_h</parameter></term>
-	  <listitem>
-
-	    <para>
-	      Either <literal>yes</literal> or <literal>no</literal>.
-	      Intended for <emphasis>internal use only</emphasis>
-	      and may be removed in future versions.
-
-	      <note>
-		<title>Note for &libgtop; hackers</title>
-
-		<para>
-		  This variable gets set in
-		  <filename>macros/gnome-libgtop-sysdeps.m4</filename>.
-
-		<para>
-		  If this is enabled, you need to put a
-		  <filename>glibtop_machine.h</filename> header file in the
-		  sysdeps directory which needs to define a structure of
-		  type <type>glibtop_machine</type>.
-
-		<para>
-		  This structure represents the
-		  <structfield>machine</structfield> field of
-		  <type>glibtop</type> defined in
-		  <filename>glibtop.h</filename>
-		  and can be used to store some
-		  machine dependent data.
-	      </note>
-
-	<varlistentry>
-	  <term><parameter>libgtop_guile_found</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Either <literal>yes</literal> or <literal>no</literal>.
-
-	<varlistentry>
-	  <term><parameter>libgtop_want_examples</parameter></term>
-	  <listitem>
-	    
-	    <para>
-	      Considered obsolete.
-
-      </variablelist>
-
-    <para>
-      All this variables are taken from the
-      &libgtopConf.sh; script which is created during
-      the installation of &libgtop;.
-
-      <example>
-	<title>
-	  Sample &libgtopConf.sh; (gnome and guile are installed in
-	  <filename>/home/baulig/INSTALL</filename> and &libgtop; in
-	  <filename>/home/norwegen/TEST</filename>)
-	</title>
-	
-	<programlisting>&example-libgtopConf-sh;</programlisting>
-      </example>
-
-  </sect1>
-  
-<!--
-  Local Variables:
-  mode: sgml
-  sgml-omittag:t
-  sgml-shorttag:t
-  sgml-minimize-attributes:nil
-  sgml-always-quote-attributes:t
-  sgml-indent-step:2
-  sgml-indent-data: t
-  sgml-parent-document: ("gnome-hackers.sgml" "book" "chapter" "")
-  End:
- -->
--- a/doc/catalog
+++ b/doc/catalog
@@ -1,3 +0,0 @@
-PUBLIC "-//James Clark//DTD DSSSL Flow Object Tree//EN" "fot.dtd"
-PUBLIC "ISO/IEC 10179:1996//DTD DSSSL Architecture//EN" "dsssl.dtd"
-PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" "style-sheet.dtd"
--- a/doc/dbtohtml.dsl
+++ b/doc/dbtohtml.dsl
--- a/doc/features/proclist.sgml
+++ b/doc/features/proclist.sgml
@@ -1,153 +0,0 @@
-  <para>
-    This functions takes the following additional parameters:
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>which</parameter></term>
-	<listitem>
-
-	  <para>
-	    You can use the following constants (defined in
-	    <filename>glibtop/proclist.h</filename>) to tell
-	    <function>glibtop_get_proclist ()</function> which processes
-	    to fetch:
-
-	    <variablelist>
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_ALL</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch all processes.
-
-	      </varlistentry>
-	      
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_PID</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch process with pid <parameter>arg</parameter> or
-		    nothing if no such process exists.
-
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_PGRP</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch only processes which are in process group
-		    <parameter>arg</parameter>.
-
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_SESSION</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch only processes with session id
-		    <parameter>arg</parameter>.
-
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_TTY</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch only processes with tty id
-		    <parameter>arg</parameter>.
-		    
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_UID</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch only processes with effective user id
-		    <parameter>arg</parameter>.
-		    
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_KERN_PROC_RUID</parameter></term>
-		<listitem>
-
-		  <para>
-		    Fetch only processes with real user id
-		    <parameter>arg</parameter>.
-		    
-	      </varlistentry>
-
-	    </variablelist>
-
-	  <para>
-	    You can use one or more of the following flags (with a
-	    logical or) to hide some processes:
-
-	    <variablelist>
-	      <varlistentry>
-		<term><parameter>GLIBTOP_EXCLUDE_IDLE</parameter></term>
-		<listitem>
-
-		  <para>
-		    Don't fetch idle processes.
-
-	      </varlistentry>
-	      
-	      <varlistentry>
-		<term><parameter>GLIBTOP_EXCLUDE_SYSTEM</parameter></term>
-		<listitem>
-
-		  <para>
-		    Don't fetch system processes.
-
-	      </varlistentry>
-
-	      <varlistentry>
-		<term><parameter>GLIBTOP_EXCLUDE_NOTTY</parameter></term>
-		<listitem>
-
-		  <para>
-		    Don't fetch processes that have no controlling tty.
-
-	      </varlistentry>
-
-	    </variablelist>
-	      
-      </varlistentry>
-
-      <varlistentry>
-	<term><parameter>arg</parameter></term>
-	<listitem>
-
-	  <para>
-	    Additional argument depending upon the
-	    <parameter>which</parameter> argument.
-
-      </varlistentry>
-    </variablelist>
-
-  <para>
-    This function returns a pointer (of type <type>unsigned *</type>) to
-    the list of process ids.
-
-  <para>
-    You have to manually &glibtop-free; this pointer once finished with it.
-  
-  <!--
-  Local Variables:
-  mode: sgml
-  sgml-omittag:t
-  sgml-shorttag:t
-  sgml-minimize-attributes:nil
-  sgml-always-quote-attributes:t
-  sgml-indent-step:2
-  sgml-indent-data: t
-  sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
-  End:
-  -->
-    
--- a/doc/features/procmem.sgml
+++ b/doc/features/procmem.sgml
@@ -1,103 +0,0 @@
-  <para>
-    The automatically generated description above is taken from the
-    manual page of the <filename>/proc</filename> filesystem under Linux
-    and is a little bit confusing, so I make this clear here.
-    
-    <note>
-      <title>Note for people porting &libgtop; to other systems</title>
-
-      <para>
-	Well, every operating system has its own idea about the memory usage
-	of a processes, and also system utilities like <filename>ps</filename>
-	show different things on different systems.
-
-      <para>
-	Nevertheless, we should try to make &libgtop; as system independent
-	as possible, so I give you some hints here how &glibtop-get-procmem;
-	should work.
-
-	<itemizedlist>
-	  <listitem>
-	    <para>
-	      When you use &mmap; with either &MAP-SHARED; or &MAP-PRIVATE;,
-	      this should only affect the &pmem-vsize; of the process and
-	      none of its &pmem-size;, &pmem-resident;, &pmem-shared; and
-	      &pmem-rss; sizes.
-
-	  <listitem>
-	    <para>
-	      As soon as you read some of the &mmap;ed pages, they will be
-	      demand-loaded and thus count towards the &pmem-size; of the
-	      process. Also - we assume there is enough free memory - they
-	      are resident in memory until they get stolen or swapped out
-	      and thus increase the &pmem-resident; and &pmem-rss; sizes of
-	      the process.
-
-	  <listitem>
-	    <para>
-	      If the process has used &MAP-SHARED; and another process
-	      attaches the same file also &MAP-SHARED; some of the pages
-	      are shared with this process and thus increase the &pmem-shared;
-	      sizes of both processes.
-
-	  <listitem>
-	    <para>
-	      If the process has used &MAP-PRIVATE; and writes to the &mmap;ed
-	      pages, the only difference to reading from them is that they
-	      get dirty and cannot be stolen any longer but will get swapped
-	      out.
-
-	  <listitem>
-	    <para>
-	      If memory gets rare, clean pages are normally stolen which
-	      decreases the &pmem-size;, &pmem-resident;, &pmem-shared; and
-	      &pmem-rss; sizes of the process.
-
-	  <listitem>
-	    <para>
-	      When dirty pages are swapped out, this will
-	      <emphasis>not</emphasis> decrease the &pmem-size; of the
-	      process but only its &pmem-resident; and &pmem-rss; sizes
-	      (dirty pages cannot be shared).
-
-	  <listitem>
-	    <para>
-	      The &pmem-vsize; of a process can <emphasis>only</emphasis>
-	      be changed by the process itself when it requests or frees
-	      memory but <emphasis>never</emphasis> due to swapping
-	      activity of the system.
-
-	  <listitem>
-	    <para>
-	      If the &pmem-shared; size changes, this
-	      <emphasis>only</emphasis> means that the number of pages that
-	      are currently shared with other processes has changed; if this
-	      happens, this will <emphasis>never</emphasis> affect any of the
-	      other sizes of the process.
-	
-	</itemizedlist>
-
-    </note>
-
-  <para>
-    The hints above describe how it works under Linux - and we should try to
-    make &glibtop-get-procmem; show the same behavior under every other
-    system.
-
-  <para>
-    If you want to make any comments, flames, suggestions about this, please
-    feel free to do so.
-    
-    <!--
-    Local Variables:
-    mode: sgml
-    sgml-omittag:t
-    sgml-shorttag:t
-    sgml-minimize-attributes:nil
-    sgml-always-quote-attributes:t
-    sgml-indent-step:2
-    sgml-indent-data: t
-    sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
-    End:
-    -->
-  
--- a/doc/features/uptime.sgml
+++ b/doc/features/uptime.sgml
@@ -1,23 +0,0 @@
-  <note>
-    
-    <para>
-      You can calculate this from the CPU usage (this one is taken
-      from the FreeBSD port):
-      
-      <programlisting>&include-uptime.txt;</programlisting>
-      
-  </note>
-  
-  <!--
-  Local Variables:
-  mode: sgml
-  sgml-omittag:t
-  sgml-shorttag:t
-  sgml-minimize-attributes:nil
-  sgml-always-quote-attributes:t
-  sgml-indent-step:2
-  sgml-indent-data: t
-  sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
-  End:
-  -->
-  
--- a/doc/features/uptime.txt
+++ b/doc/features/uptime.txt
@@ -1,40 +0,0 @@
-#include &lt;glibtop.h&gt;
-#include &lt;glibtop/error.h&gt;
-#include &lt;glibtop/uptime.h&gt;
-
-#include &lt;glibtop/cpu.h&gt;
-
-#include &lt;glibtop_suid.h&gt;
-
-static const unsigned long _glibtop_sysdeps_uptime =
-(1 << GLIBTOP_UPTIME_UPTIME) + (1 << GLIBTOP_UPTIME_IDLETIME);
-
-static const unsigned long _required_cpu_flags =
-(1 << GLIBTOP_CPU_TOTAL) + (1 << GLIBTOP_CPU_IDLE) +
-(1 << GLIBTOP_CPU_FREQUENCY);
-
-void
-glibtop_get_uptime_p (glibtop *server, glibtop_uptime *buf)
-{
-	glibtop_cpu cpu;
-
-	glibtop_init_p (server, GLIBTOP_SYSDEPS_UPTIME, 0);
-	
-	memset (buf, 0, sizeof (glibtop_uptime));
-
-	/* We simply calculate it from the CPU usage. */
-
-	glibtop_get_cpu_p (server, &amp;cpu);
-
-	/* Make sure all required fields are present. */
-
-	if ((cpu.flags &amp; _required_cpu_flags) != _required_cpu_flags)
-		return;
-
-	/* Calculate values. */
-
-	buf->uptime = (double) cpu.total / (double) cpu.frequency;
-	buf->idletime = (double) cpu.idle / (double) cpu.frequency;
-
-	buf->flags = _glibtop_sysdeps_uptime;
-}
--- a/doc/gnome-hackers.dsl
+++ b/doc/gnome-hackers.dsl
@@ -1,12 +0,0 @@
-<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
-]>
-
-<style-specification id="gnomehackersdbotohtml" use="dbtohtml">
-
-(define %output-basename% "gnome-hackers")
-(define %output-directory% "gnome-hackers")
-
-</style-specification>
-
-<external-specification id="dbtohtml" document="dbtohtml.dsl">
--- a/doc/gnome-hackers.sgml
+++ b/doc/gnome-hackers.sgml
@@ -1,187 +0,0 @@
-<!-- $Id$ -->
-
-<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
-<!-- Site-specific entities, change them if you want to copy this
-     document somewhere else. -->
-<!entity home-of-linux "http://www.home-of-linux.org/">
-
-<!-- Some general entities -->
-
-<!entity libgtop "<productname>libgtop</productname>">
-
-<!-- Some abbreviations for often used filenames and functions. -->
-
-<!entity gnome-libgtop-check.m4 "<filename>macros/gnome-libgtop-check.m4</filename>">
-<!entity libgtopConf.sh "<filename>libgtopConf.sh</filename>">
-<!entity glibtop-free "<function>glibtop_free ()</function>">
-<!entity glibtop-get-procmem "<function>glibtop_get_proc_mem ()</function>">
-<!entity mmap "<function>mmap ()</function>">
-<!entity MAP-SHARED "<parameter>MAP_SHARED</parameter>">
-<!entity MAP-PRIVATE "<parameter>MAP_PRIVATE</parameter>">
-<!entity pmem-vsize "<structfield>procmem.vsize</structfield>">
-<!entity pmem-size "<structfield>procmem.size</structfield>">
-<!entity pmem-resident "<structfield>procmem.resident</structfield>">
-<!entity pmem-shared "<structfield>procmem.shared</structfield>">
-<!entity pmem-rss "<structfield>procmem.rss</structfield>">
-
-<!-- This will include a sample `libgtopConf.sh'. -->
-
-<!entity example-libgtopConf-sh SYSTEM "libgtopConf.sh">
-
-<!-- Some entities to include other files. -->
-
-<!entity include-autoconf.sgml SYSTEM "autoconf.sgml">
-<!entity include-reference.sgml SYSTEM "../guile/reference.sgml">
-
-<!-- The following entities are used in the automatically generated
-     `reference.sgml' to include custom descriptions of the features.
-  -->
-
-<!entity include-cpu.sgml "">
-<!entity include-mem.sgml "">
-<!entity include-swap.sgml "">
-<!entity include-uptime.sgml SYSTEM "features/uptime.sgml">
-<!entity include-loadavg.sgml "">
-<!entity include-shm-limits.sgml "">
-<!entity include-msg-limits.sgml "">
-<!entity include-sem-limits.sgml "">
-<!entity include-proclist.sgml SYSTEM "features/proclist.sgml">
-<!entity include-proc-state.sgml "">
-<!entity include-proc-uid.sgml "">
-<!entity include-proc-mem.sgml SYSTEM "features/procmem.sgml">
-<!entity include-proc-time.sgml "">
-<!entity include-proc-signal.sgml "">
-<!entity include-proc-kernel.sgml "">
-<!entity include-proc-segment.sgml "">
-<!entity include-proc-map.sgml "">
-<!entity include-mountlist.sgml "">
-<!entity include-fsusage.sgml "">
-
-<!entity include-uptime.txt SYSTEM "features/uptime.txt">
-]>
-<book>
-  <bookinfo>
-    <title>Using Libgtop in the Gnome Project</title>
-    <authorgroup>
-      <author>
-	<firstname>Martin</firstname>
-	<surname>Baulig</surname>
-	<affiliation>
-	  <address>
-	    <email>martin@home-of-linux.org</email>
-	  </address>
-	</affiliation>
-      </author>
-    </authorgroup>
-    <copyright>
-      <year>1998</year>
-      <holder>Martin Baulig</holder>
-    </copyright>
-    
-    <legalnotice>
-
-      <para>
-	This documentation is free software; you can redistribute
-	it and/or modify it under the terms of the GNU General Public
-	License as published by the Free Software Foundation; either
-	version 2 of the License, or (at your option) any later
-	version.
-	
-      <para>
-	This library is distributed in the hope that it will be
-	useful, but WITHOUT ANY WARRANTY; without even the implied
-	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-	PURPOSE.  See the GNU General Public License for more
-	details.
-
-      <para>
-	You should have received a copy of the GNU General Public
-	License along with this program; if not, write to the Free
-	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-	MA 02111-1307 USA
-
-      <para>
-	For more details see the file COPYING in the source
-	distribution of &libgtop;.</para>
-
-    </legalnotice>
-
-    <abstract>
-      <para>
-	<literal>
-          $Id$
-        </literal>
-
-      <para>
-	This is a short introduction in how to use
-	<productname>libgtop</productname> in the GNOME project.
-	It describes the additional options <filename>configure</filename>
-	takes and the information stored in the automatically generated
-	<filename>libgtopConf.sh</filename> configuration script.
-
-	<note>
-	  <para>
-	    Documentation about the new <function>table ()</function>
-	    function can be found here:
-
-	    <itemizedlist>
-	      <listitem><para>
-		  <ulink url="&home-of-linux;kernel/table/">
-		    &home-of-linux;kernel/table/
-		  </ulink>
-	    </itemizedlist>
-	</note>
-
-    </abstract>
-
-  </bookinfo>
-
-  <toc></toc>
-
-  <chapter id="autoconf-automake">
-    <title>Configuration</title>
-
-    &include-autoconf.sgml;
-
-  </chapter>
-
-  <chapter id="functions">
-    <title>Function Reference List</title>
-    
-    &include-reference.sgml;
-
-  </chapter>
-
-  <chapter id="porting-libgtop">
-    <title>Porting &libgtop; to other systems</title>
-
-    <para>
-      Here are some comments for people porting &libgtop; to other systems.
-
-    <sect1>
-      <title>&glibtop-get-procmem; - Process Memory information</title>
-
-      <para>
-	This section is copied here from the description of
-	&glibtop-get-procmem;.
-      </para>
-	
-      &include-proc-mem.sgml;
-
-    </sect1>
-
-  </chapter>
-
-</book>
-
-<!--
-  Local Variables:
-  mode: sgml
-  sgml-omittag:t
-  sgml-shorttag:t
-  sgml-minimize-attributes:nil
-  sgml-always-quote-attributes:t
-  sgml-indent-step:2
-  sgml-indent-data: t
-  End:
- -->
--- a/doc/libgtop-ref.dsl
+++ b/doc/libgtop-ref.dsl
@@ -1,12 +0,0 @@
-<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
-]>
-
-<style-specification id="libgtoprefdbtohtml" use="dbtohtml">
-
-(define %output-basename% "libgtop-ref")
-(define %output-directory% "libgtop-ref")
-
-</style-specification>
-
-<external-specification id="dbtohtml" document="dbtohtml.dsl">
--- a/doc/libgtop-ref.sgml
+++ b/doc/libgtop-ref.sgml
@@ -1,108 +0,0 @@
-<!-- $Id$ -->
-
-<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
-<!entity include-reference.sgml SYSTEM "../guile/reference.sgml" >
-
-<!-- The following entities are used in the automatically generated
-     `reference.sgml' to include custom descriptions of the features.
-  -->
-
-<!entity include-cpu.sgml "">
-<!entity include-mem.sgml "">
-<!entity include-swap.sgml "">
-<!entity include-uptime.sgml "">
-<!entity include-loadavg.sgml "">
-<!entity include-shm-limits.sgml "">
-<!entity include-msg-limits.sgml "">
-<!entity include-sem-limits.sgml "">
-<!entity include-proclist.sgml "">
-<!entity include-proc-state.sgml "">
-<!entity include-proc-uid.sgml "">
-<!entity include-proc-mem.sgml "">
-<!entity include-proc-time.sgml "">
-<!entity include-proc-signal.sgml "">
-<!entity include-proc-kernel.sgml "">
-<!entity include-proc-segment.sgml "">
-<!entity include-proc-map.sgml "">
-<!entity include-mountlist.sgml "">
-<!entity include-fsusage.sgml "">
-]>
-<book>
-  <bookinfo>
-    <title>LibGTop Reference Manual</title>
-    <authorgroup>
-      <author>
-	<firstname>Martin</firstname>
-	<surname>Baulig</surname>
-	<affiliation>
-	  <address>
-	    <email>martin@home-of-linux.org</email>
-	  </address>
-	</affiliation>
-      </author>
-    </authorgroup>
-    <abstract>
-      <para>
-	<literal>$Id$</literal>
-
-      <para>
-	This reference manual is automatically generated from
-	<filename>doc/make-docbook.scm</filename>. It uses the
-	guile interface of <productname>libgtop</productname> to
-	get the names of all features the library defines and a
-	description of the structures.
-    </abstract>
-
-    <copyright>
-      <year>1998</year>
-      <holder>Martin Baulig</holder>
-    </copyright>
-    <legalnotice>
-
-      <para>
-	This documentation is free software; you can redistribute
-	it and/or modify it under the terms of the GNU General Public
-	License as published by the Free Software Foundation; either
-	version 2 of the License, or (at your option) any later
-	version.
-	
-      <para>
-	This library is distributed in the hope that it will be
-	useful, but WITHOUT ANY WARRANTY; without even the implied
-	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-	PURPOSE.  See the GNU General Public License for more
-	details.
-
-      <para>
-	You should have received a copy of the GNU General Public
-	License along with this program; if not, write to the Free
-	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-	MA 02111-1307 USA
-
-      <para>
-	For more details see the file COPYING in the source
-	distribution of LibGTop.</para>
-
-    </legalnotice>
-  </bookinfo>
-  
-  <toc></toc>
-  
-  <chapter id="functions">
-    <title>Function Reference List</title>
-    
-    &include-reference.sgml;
-
-</book>
-
-<!--
-  Local Variables:
-  mode: sgml
-  sgml-omittag:t
-  sgml-shorttag:t
-  sgml-minimize-attributes:nil
-  sgml-always-quote-attributes:t
-  sgml-indent-step:2
-  sgml-indent-data: t
-  End:
- -->
--- a/doc/libgtop.dsl
+++ b/doc/libgtop.dsl
@@ -1,12 +0,0 @@
-<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
-]>
-
-<style-specification id="libgtopdbtohtml" use="dbtohtml">
-
-(define %output-basename% "libgtop")
-(define %output-directory% "libgtop")
-
-</style-specification>
-
-<external-specification id="dbtohtml" document="dbtohtml.dsl">
--- a/doc/libgtop.sgml
+++ b/doc/libgtop.sgml
--- a/doc/libgtopConf.sh
+++ b/doc/libgtopConf.sh
@@ -1,35 +0,0 @@
-#
-# Configuration of the libgtop package
-#
-
-LIBGTOP_LIBDIR="/home/baulig/TEST/lib"
-LIBGTOP_INCLUDEDIR="/home/baulig/TEST/include"
-
-LIBGTOP_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_common -lgtop_sysdeps -L/usr/X11R6/lib -lXau"
-LIBGTOP_INCS="-I/home/baulig/TEST/include"
-
-LIBGTOP_NAMES_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_common -lgtop_sysdeps -lgtop_names -L/usr/X11R6/lib -lXau"
-LIBGTOP_NAMES_INCS="-I/home/baulig/TEST/include -DGLIBTOP_NAMES"
-
-LIBGTOP_GUILE_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_guile -lgtop_common -lgtop_sysdeps -L/usr/X11R6/lib -lXau -L/home/baulig/INSTALL/lib -lguile -ldl -lreadline -ltermcap -lm"
-LIBGTOP_GUILE_INCS="-I/home/baulig/TEST/include -I/home/baulig/INSTALL/include -DGLIBTOP_GUILE"
-
-LIBGTOP_GUILE_NAMES_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_guile -lgtop_common -lgtop_sysdeps -lgtop_names -L/usr/X11R6/lib -lXau"
-LIBGTOP_GUILE_NAMES_INCS="-I/home/baulig/TEST/include -I/home/baulig/INSTALL/include -DGLIBTOP_GUILE -DGLIBTOP_NAMES"
-
-LIBGTOP_BINDIR="/home/baulig/TEST/bin"
-LIBGTOP_SERVER="/home/baulig/TEST/bin/libgtop_server"
-
-LIBGTOP_MAJOR_VERSION="0"
-LIBGTOP_MINOR_VERSION="2a"
-LIBGTOP_VERSION="0.2a"
-
-LIBGTOP_SERVER_VERSION="1"
-
-libgtop_sysdeps_dir="linux"
-libgtop_need_server="no"
-libgtop_use_machine_h="no"
-
-libgtop_guile_found="yes"
-
-libgtop_want_examples=""
--- a/doc/main.texi
+++ b/doc/main.texi
@@ -0,0 +1,68 @@
+@node Top, About, (dir), (dir)
+
+@menu
+* About::                       About LibGTop
+* White Paper::                 LibGTop White Paper
+* Reference Manual::            LibGTop Reference Manual
+
+ --- The Detailed Node Listing ---
+
+About LibGTop
+
+* Availability::                Where to get LibGTop
+* Supported Platforms::         Supported Platforms
+* Mailing List::                Helping with LibGTop development
+* Thanks::                      People who contributed to LibGTop
+
+LibGTop White Paper
+
+* Introduction::                Introduction
+* Overview::                    Overview
+
+Overview
+
+* Interface Design::            Things that need to be considered
+* Server Implementation::       The LibGTop "server"
+
+LibGTop Reference Manual
+
+* System Dependent::            System Dependent Functions.
+* Common Functions::            Common Functions.
+* Library Functions::           Library Functions.
+
+System Dependent Functions
+
+* glibtop_cpu::                 CPU Usage.
+* glibtop_mem::                 Memory Usage.
+* glibtop_swap::                Swap Usage.
+* glibtop_uptime::              System Uptime.
+* glibtop_loadavg::             Load Average.
+* glibtop_proclist::            Process List.
+* glibtop_proc_state::          Process State.
+* glibtop_proc_uid::            Process UID and TTY Information.
+* glibtop_proc_mem::            Process Memory Information.
+* glibtop_proc_time::           Process Time Information.
+* glibtop_proc_signal::         Process Signal Information.
+* glibtop_proc_kernel::         Process Kernel Data Information.
+* glibtop_proc_segment::        Process Segment Information.
+* glibtop_proc_args::           Process Arguments.
+* glibtop_proc_map::            Process Memory Maps.
+* glibtop_netload::             Network Load.
+* glibtop_ppp::                 PPP Usage.
+
+Common Functions
+
+* glibtop_mountlist::           Mount List.
+* glibtop_fsusage::             File System Usage.
+
+Library Functions
+
+* glibtop_init::                Server Initialization.
+* glibtop_sysdeps::             Server Sysdeps.
+* Library Parameters::          Library Parameters.
+@end menu
+
+@include about.texi
+@include white-paper.texi
+@include reference.texi
+
--- a/doc/reference.texi
+++ b/doc/reference.texi
--- a/doc/table.announce.txt
+++ b/doc/table.announce.txt
@@ -1,161 +0,0 @@
-Path: news.uni-stuttgart.de!fu-berlin.de!taurus.uni-trier.DE!baulig
-From: Martin Baulig <baulig@merkur.uni-trier.de>
-Newsgroups: comp.os.linux.development.system
-Subject: RFC: New system call for /proc information ?
-Date: 07 Jun 1998 20:22:47 +0200
-Lines: 143
-Sender: baulig@Taurus.uni-trier.de
-Message-ID: <of7zpfprs08.fsf@Taurus.uni-trier.de>
-NNTP-Posting-Host: taurus.uni-trier.de (136.199.14.201)
-Mime-Version: 1.0
-Content-Type: text/plain; charset=iso-8859-1
-Content-Transfer-Encoding: 8bit
-NNTP-Posting-User: baulig
-X-Access: 16 1542 1543
-X-Trace: fu-berlin.de 897243777 29527 baulig 136.199.14.201
-X-Newsreader: Gnus v5.6.11/XEmacs 20.3 - "Vatican City"
-Xref: news.uni-stuttgart.de comp.os.linux.development.system:73539
-
-[Posted to the Gnome Mailing List and to comp.os.linux.development.system]
-
-Request for Comments:
-====================
-
-Should we have a new system call under Linux which fetches information
-from the /proc filesytem similar to the table() function of DEC OSF/1 ?
-
-The whole story:
-===============
-
-I am currently working on libgtop, a library that fetches information
-from the proc filesystem for user processes. This library uses a suid
-server on system where this is required. On Linux, the information are
-fetched directly from the proc filesystem.
-
-Now, I made some profilings (fetches 50000 times cpu, memory, swap,
-uptime and loadavg):
-
-Each sample counts as 0.01 seconds.
-  %   cumulative   self              self     total           
- time   seconds   seconds    calls  ns/call  ns/call  name    
- 91.86    348.03   348.03                             read
-  3.07    359.67    11.64                             open
-  0.67    362.22     2.55                             close
-  0.16    363.55     0.62                             memset
-  0.16    364.14     0.59                             __ipc
-  0.03    368.84     0.12                             vsscanf (iovsscanf.c:31)
-  0.01    374.49     0.05                             sscanf (sscanf.c:28)
-  0.00    378.71     0.01                             semctl (semctl.c:32)
-  0.00    378.73     0.01                             shmctl (shmctl.c:30)
-
-granularity: each sample hit covers 4 byte(s) for 0.00% of 378.88 seconds
-
-index % time    self  children    called     name
-[1]     91.9  348.03    0.00                 read [1]
-----------------------------------------------
-[2]      3.1   11.64    0.00                 open [2]
-----------------------------------------------
-[3]      0.7    2.55    0.00                 close [3]
-----------------------------------------------
-[5]      0.2    0.62    0.00                 memset [5]
-----------------------------------------------
-[6]      0.2    0.59    0.00                 __ipc [6]
-----------------------------------------------
-[35]     0.0    0.12    0.00                 vsscanf (iovsscanf.c:31) [35]
-----------------------------------------------
-[96]     0.0    0.05    0.00                 sscanf (sscanf.c:28) [96]
-----------------------------------------------
-
-You see, it spends a lot of time in read() which is only used to read the
-data from the files in /proc. Well, basically one can say that these
-timings are not so bad, normally a process periodically fetches those
-information say 10 times a seconds which makes 36000 invocations per
-hour.
-
-This will make a total of about 250 seconds per hour or on even say:
-
-``a program fetching those information at a frequency of 10 will take
-  about 7 % of each hour just for reading files from /proc''.
-
-Now look at timings of __ipc, they're about 350 times better 'cause this
-is done using system calls.
-
-So far so good, now look at how this is done on the DEC OSF/1 port of the
-library (the following code is part of libgtop - GPL/LGPL):
-
-CPU usage:
-{
-	struct tbl_sysinfo sysinfo;
-	int ret;
-	
-	ret = table (TBL_SYSINFO, 0, (char *) &sysinfo, 1,
-		     sizeof (struct tbl_sysinfo)); 
-
-	buf->user = sysinfo.si_user;
-	buf->nice = sysinfo.si_nice;
-	buf->sys  = sysinfo.si_sys;
-	buf->idle = sysinfo.si_idle;
-}
-
-Well, the table() command of DEC OSF/1 has may disadvantages, too - such
-as requiring to be root to fetch any information about processes (well, for
-each process that is not the current one).
-
-But this works using system calls rather that reading and parsing files
-and should be about as fast as getting the IPC information on Linux.
-
-Under Linux, the current trend seems to be to move anything into the /proc
-filesystem, but if you look at the timings, wouldn't it be better to also
-implement a system call interface ?
-
-Don't understand me wrong:
-=========================
-
-I *do not want* to *replace* the /proc filesystem - it's an excellent
-idea to be able to fetch all information on the command line without
-any program just a simple 'cat' - I want to *add* a *new* system call
-to allow programmers to fetch those information faster that reading
-from /proc.
-
-To come to the point:
-=====================
-
-Is there any public interest in having a new system call under Linux
-which can be used to fetch all information that are currently in the
-/proc filesystem.
-
-Basically, this system would be defined like this:
-
-	asmlinkage int
-	sys_table (int command, struct sysinfo_table *buf)
-
-and be invoked like this:
-
-	#include <sys/table.h>
-	
-	{
-	  struct sysinfo_cpu cpu;
-	  struct sysinfo_mem mem;
-	
-	  ret = table (TABLE_CPU, &cpu);
-	  if (ret == -1) return; /* or invoke any error handler */
-	
-	  ret = table (TABLE_MEM, &mem);
-	  if (ret == -1) return;
-	}
-
-What do you think, folks. Should we have such a system call under Linux ?
-I can do the implementation of this system call, but I want to have some
-feedback first.
-
-Martin
-
-- 
-----------------------------------------------------------------
-   Martin Baulig - Angewandte Mathematik - Universitaet Trier
-
-   baulig@castor.uni-trier.de, http://www.home-of-linux.com/
-   Key: 1024-bit key with ID C8178435 created 1997/01/24 
-   ID:  67 C1 84 A0 47 F5 11 C5  5F 68 4C 84 99 05 C3 92
-   Finger me for public key or fetch finger.txt from the url above
------------------------------------------------------------------
--- a/doc/table.dsl
+++ b/doc/table.dsl
@@ -1,12 +0,0 @@
-<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
-]>
-
-<style-specification id="tabledbotohtml" use="dbtohtml">
-
-(define %output-basename% "table")
-(define %output-directory% "table")
-
-</style-specification>
-
-<external-specification id="dbtohtml" document="dbtohtml.dsl">
--- a/doc/table.sgml
+++ b/doc/table.sgml
@@ -1,193 +0,0 @@
-<!-- $Id$ -->
-
-<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
-<!entity libgtopConf.sh SYSTEM "../libgtopConf.sh" >
-<!entity home-of-linux "http://www.home-of-linux.org/">
-<!entity table-announce-first "&home-of-linux;kernel/table/ANNOUNCE.FIRST">
-<!entity table20-tgz "&home-of-linux;kernel/table/table20.tgz">
-<!entity table21-tgz "&home-of-linux;kernel/table/table21.tgz">
-<!entity news-c-o-l-d-s "comp.os.linux.development.system">
-<!entity libgtop "<productname>libgtop</productname>">
-<!entity table "<function>table ()</function>">
-]>
-<book>
-  <bookinfo>
-    <title>The &table; system call under Linux</title>
-    <authorgroup>
-      <author>
-	<firstname>Martin</firstname>
-	<surname>Baulig</surname>
-	<affiliation>
-	  <address>
-	    <email>martin@home-of-linux.org</email>
-	  </address>
-	</affiliation>
-      </author>
-    </authorgroup>
-    <copyright>
-      <year>1998</year>
-      <holder>Martin Baulig</holder>
-    </copyright>
-    
-    <legalnotice>
-
-      <para>
-	This documentation is free software; you can redistribute
-	it and/or modify it under the terms of the GNU General Public
-	License as published by the Free Software Foundation; either
-	version 2 of the License, or (at your option) any later
-	version.
-	
-      <para>
-	This library is distributed in the hope that it will be
-	useful, but WITHOUT ANY WARRANTY; without even the implied
-	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-	PURPOSE.  See the GNU General Public License for more
-	details.
-
-      <para>
-	You should have received a copy of the GNU General Public
-	License along with this program; if not, write to the Free
-	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-	MA 02111-1307 USA
-
-      <para>
-	For more details see the file COPYING in the source
-	distribution of LibGTop.</para>
-
-    </legalnotice>
-
-    <abstract>
-      <para>
-	<literal>$Id$</literal>
-
-      <para>
-	Under <productname>Linux</productname>, reading from
-	<filename>/proc</filename> is somehow slow because the data
-	needs to be converted into a stringified representation from
-	the kernel and to be parsed from the application program to
-	get the original data back.
-
-	While doing the <productname>DEC OSF/1</productname> port of
-	&libgtop; I got the idea to add something similar to the &table;
-	function there to the Linux kernel.
-
-	This is what this document is about.
-    </abstract>
-
-  </bookinfo>
-
-  <toc></toc>
-
-  <chapter id="why-not-sysctl">
-    <title>Why not <function>sysctl</function>?</title>
-
-    <para>
-      Some weeks ago, I posted the initial proposal of the project to
-      <ulink url="news:&news-c-o-l-d-s;">&news-c-o-l-d-s;</ulink> with
-      Message-ID <literal>&lt;of7zpfprs08.fsf@Taurus.uni-trier.de&gt;</literal>.
-
-    <para>
-      You can also read this article at my site:
-
-      <itemizedlist>
-	<listitem><para>
-	  <ulink url="&table-announce-first;">&table-announce-first;</ulink>
-      </itemizedlist>
-
-    <para>
-      Some people told me to include all the stuff into
-      <function>sysctl</function> instead of inventing a new system call.
-
-    <para>
-      Basically this is a good idea, but the main problem with
-      <function>sysctl</function> is that this should be applied to standard
-      kernels and not just as a short patch. Well, AFAIK something similar
-      is on the "wish list" for 2.2er kernels - but of cause it'll need some
-      time until we have a real replacement of the <filename>/proc</filename>
-      filesystem in <function>sysctl</function>.
-
-    <para>
-      If someone thinks that this absolutely should be included in
-      <function>sysctl</function>: think about some kind of interface,
-      discuss it with the kernel developers, ...
-
-  <chapter id="about-table">
-    <title>About the &table; function</title>
-
-    <para>
-      Using the &table; function will not affect any existing kernel
-      structures and can be done independent from kernel development.
-
-    <para>
-      So it can easily be used in &libgtop; until we have something
-      simliar in standard kernels.
-
-    <para>
-      If you want to use the &table; function in your own programs, be
-      aware that it is just intended to be some kind of quick solution
-      for &libgtop; until there's something better in standard kernels.
-
-  <chapter id="how-to-use">
-    <title>How to use the &table; function in &libgtop;</title>
-
-    <para>
-      The source code of the &table; function is distributed together with
-      &libgtop;. It can be found in the <filename>kernel/table20</filename>
-      directory for 2.0.xx kernels and in the <filename>kernel/table21</filename>
-      directory for 2.1.xx kernels.
-
-    <para>
-      You can also download it from my site:
-      
-      <itemizedlist>
-	<listitem><para>
-	    <ulink url="&table20-tgz;">&table20-tgz</ulink>
-	    (for kernel 2.0.xx)
-	<listitem><para>
-	    <ulink url="&table21-tgz;">&table21-tgz</ulink>
-	    (for kernel 2.1.xx)
-      </itemizedlist>
-
-    <para>
-      Copy the contents of the appropriate directory to
-      <filename>/usr/src/linux/table</filename>, apply the
-      patch to the kernel and re-configure &libgtop;.
-
-    <para>
-      After that, you can unmount <filename>/proc</filename> and
-      &libgtop; will still work !
-
-      <note>
-	<para>
-	  Maybe one could consider this as a bug, but currently there
-	  isn't a configuration option to disable the &table; function
-	  once you applied the patch ...
-      </note>
-
-      <note>
-	<para>
-	  Currently I'm working on the 2.1.x version to implement some
-	  features newer kernels have - so the 2.0.x version may not
-	  have all features the 2.1.x one has.
-      </note>
-
-      <note>
-	<para>
-	  The 2.1.x version of the &table; function is implemented
-	  as a kernel module. You have to do a
-	  <command>insmod table/module.o</command> manually to use it.
-
-	<para>
-	  This has the advantage that you don't need to reboot if you
-	  want to play around with the code a little bit.
-      </note>
-      
-</book>
-
-<!--
-  Local Variables:
-  mode: sgml
-  sgml-indent-data: t
-  End:
- -->
--- a/examples/.cvsignore
+++ b/examples/.cvsignore
@@ -11,3 +11,6 @@ third_linux
 third_static
 second_static
 second_linux
+smp_static sysdeps_static netload_static procmap_static mountlist_static
+smp sysdeps netload procmap mountlist
+timings timings_static
--- a/examples/ChangeLog
+++ b/examples/ChangeLog
@@ -1,3 +1,63 @@
+1999-05-28  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c, second.c, sysdeps.c: Use LibGTop version conditionals
+ 	so we can more easily merge the code into LIBGTOP_STABLE_1_0.
+
+1999-05-07  Martin Baulig  <martin@home-of-linux.org>
+
+	* timings.c (timersub): Renamed this to `libgtop_timersub' and define
+	it on all systems.
+
+Fri Apr  9 00:14:52 1999 Timur Bakeyev  <timur@gnu.org>
+
+	* timings.c: Added timersub defenition, to make code compilable on 
+	BSDI.
+
+1999-03-24  Martin Baulig  <martin@home-of-linux.org>
+
+	* timings.c: New example.
+
+1999-03-17  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c, second.c: Fixed a bug that caused a core dump when
+	the sysdeps code does not return all data.
+
+1998-11-22  Martin Baulig  <baulig@taurus.uni-trier.de>
+
+	* netload.c: Call inet_ntoa () to get address and subnet
+	in quatted dot notation (like 136.199.14.201) and not just
+	as a number (like 0xc90ec788).
+
+1998-11-02  Martin Baulig  <martin@home-of-linux.org>
+
+	* sysdeps.c: New example.
+
+1998-10-26  Martin Baulig  <martin@home-of-linux.org>
+
+	* netload.c: New file. Gets network load for the interface
+	given as command line argument.
+
+1998-10-26  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c (glibtop_get_proc_args): Get command line arguments.
+	* second.c: Likewise.
+
+1998-10-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c (glibtop_get_ppp): Get PPP/ISDN statistics.
+
+1998-09-28  Martin Baulig  <martin@home-of-linux.org>
+
+	* Makefile.am: Install everything in $(libexecdir)/libgtop.
+
+1998-09-09  Martin Baulig <baulig@Stud.Informatik.uni-trier.de>
+
+	* smp.c: New file. Nice tool to show CPU statistics on SMP systems.
+
+1998-08-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c, second.c, procmap.c: Fixed some compiler warnings.
+
 1998-08-18  Martin Baulig  <martin@home-of-linux.org>

 	* procmap.c: We now display filenames when compiled
--- a/examples/Makefile.am
+++ b/examples/Makefile.am
@@ -2,25 +2,30 @@

 LINK			= $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@

-CFLAGS			= -Wall -W @CFLAGS@ -O0
+INCLUDES		= @INCLUDES@

 DEFS			= @DEFS@

 # We install it in `libexec' since this will make it more easy
 # to put the examples into an extra RPM package.

-libexec_PROGRAMS	= first first_static second second_static \
-			  mountlist mountlist_static \
-			  procmap procmap_static \
-			  @guile_examples@
+libgtopdir		= $(libexecdir)/libgtop

-EXTRA_PROGRAMS		= third third_static
+libgtop_PROGRAMS	= first second\
+			  mountlist procmap netload sysdeps timings \
+			  @static_targets@ @guile_examples@ @smp_examples@
+
+EXTRA_PROGRAMS		= first_static second_static \
+			  mountlist_static procmap_static \
+			  third third_static smp smp_static \
+			  netload_static sysdeps_static \
+			  timings_static

 first_SOURCES		= first.c
 first_LDADD		= $(top_builddir)/lib/libgtop.la \
 			  $(top_builddir)/sysdeps/common/libgtop_common.la \
 			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
-			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+			  @LIBSUPPORT@ @INTLLIBS@

 first_static_SOURCES	= $(first_SOURCES)
 first_static_LDADD	= $(first_LDADD)
@@ -30,7 +35,7 @@ second_SOURCES		= second.c
 second_LDADD		= $(top_builddir)/lib/libgtop.la \
 			  $(top_builddir)/sysdeps/common/libgtop_common.la \
 			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
-			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+			  @LIBSUPPORT@ @INTLLIBS@

 second_static_SOURCES	= $(second_SOURCES)
 second_static_LDADD	= $(second_LDADD)
@@ -40,13 +45,33 @@ procmap_SOURCES		= procmap.c
 procmap_LDADD		= $(top_builddir)/lib/libgtop.la \
 			  $(top_builddir)/sysdeps/common/libgtop_common.la \
 			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
-			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+			  @LIBSUPPORT@ @INTLLIBS@
+
+

 procmap_static_SOURCES	= $(procmap_SOURCES)
 procmap_static_LDADD	= $(procmap_LDADD)
 procmap_static_LDFLAGS	= -static

+netload_SOURCES		= netload.c
+netload_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @LIBSUPPORT@ @INTLLIBS@

+netload_static_SOURCES	= $(netload_SOURCES)
+netload_static_LDADD	= $(netload_LDADD)
+netload_static_LDFLAGS	= -static
+
+sysdeps_SOURCES		= sysdeps.c
+sysdeps_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @LIBSUPPORT@ @INTLLIBS@
+
+sysdeps_static_SOURCES	= $(sysdeps_SOURCES)
+sysdeps_static_LDADD	= $(sysdeps_LDADD)
+sysdeps_static_LDFLAGS	= -static

 third_guile_names_LIBS	= $(top_builddir)/sysdeps/guile/names/libgtop_guile_names.la
 third_names_LIBS	= $(top_builddir)/sysdeps/names/libgtop_names.la
@@ -57,8 +82,7 @@ third_LDADD		= $(top_builddir)/sysdeps/guile/libgtop_guile.la \
 			  $(top_builddir)/lib/libgtop.la \
 			  $(top_builddir)/sysdeps/common/libgtop_common.la \
 			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
-			  @GUILE_LIBS@ @INTLLIBS@ @LIBSUPPORT@ \
-			  @LIBGTOP_EXTRA_LIBS@
+			  @GUILE_LIBS@ @LIBSUPPORT@ @INTLLIBS@

 third_static_SOURCES	= $(third_SOURCES)
 third_static_LDADD	= $(third_LDADD)
@@ -68,9 +92,30 @@ mountlist_SOURCES	= mountlist.c
 mountlist_LDADD		= $(top_builddir)/lib/libgtop.la \
 			  $(top_builddir)/sysdeps/common/libgtop_common.la \
 			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
-			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+			  @LIBSUPPORT@ @INTLLIBS@

 mountlist_static_SOURCES= $(mountlist_SOURCES)
 mountlist_static_LDADD	= $(mountlist_LDADD)
 mountlist_static_LDFLAGS= -static

+
+smp_SOURCES		= smp.c
+smp_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @LIBSUPPORT@ @INTLLIBS@
+
+smp_static_SOURCES	= $(smp_SOURCES)
+smp_static_LDADD	= $(smp_LDADD)
+smp_static_LDFLAGS	= -static
+
+timings_SOURCES		= timings.c
+timings_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @LIBSUPPORT@ @INTLLIBS@
+
+timings_static_SOURCES	= $(timings_SOURCES)
+timings_static_LDADD	= $(timings_LDADD)
+timings_static_LDFLAGS	= -static
+
--- a/examples/first.c
+++ b/examples/first.c
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #include <locale.h>

@@ -44,9 +46,8 @@ main (int argc, char *argv [])
 	glibtop_sysdeps sysdeps;
 	unsigned c, method, count, port, i, *ptr;
 	char buffer [BUFSIZ];
-	struct rlimit rlim;
-	struct rusage ru;
 	pid_t pid, ppid;
+	char *args;

 	count = PROFILE_COUNT;

@@ -115,9 +116,16 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_uptime (&data.uptime);

+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Uptime       (0x%08lx): %f, %f, %lu\n",
+		(unsigned long) data.uptime.flags,
+		data.uptime.uptime, data.uptime.idletime,
+		(unsigned long) data.uptime.boot_time);
+#else
 	printf ("Uptime       (0x%08lx): %f, %f\n",
 		(unsigned long) data.uptime.flags,
 		data.uptime.uptime, data.uptime.idletime);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_loadavg (&data.loadavg);
@@ -174,10 +182,22 @@ main (int argc, char *argv [])

 	printf ("\n");

+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_ppp (&data.ppp, 0);
+
+	printf ("PPP          (0x%08lx): %lu, %lu, %lu\n",
+		(unsigned long) data.ppp.flags,
+		(unsigned long) data.ppp.state,
+		(unsigned long) data.ppp.bytes_in,
+		(unsigned long) data.ppp.bytes_out);
+
+	printf ("\n");
+
 	glibtop_get_sysdeps (&sysdeps);

 	printf ("Sysdeps      (0x%08lx): %lu, %lu, %lu, %lu, %lu, "
-		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, "
+		"%lu, %lu, %lu, %lu, %lu, %lu\n",
 		(unsigned long) sysdeps.flags,
 		(unsigned long) sysdeps.cpu,
 		(unsigned long) sysdeps.mem,
@@ -194,7 +214,13 @@ main (int argc, char *argv [])
 		(unsigned long) sysdeps.proc_time,
 		(unsigned long) sysdeps.proc_signal,
 		(unsigned long) sysdeps.proc_kernel,
-		(unsigned long) sysdeps.proc_segment);
+		(unsigned long) sysdeps.proc_segment,
+		(unsigned long) sysdeps.proc_args,
+		(unsigned long) sysdeps.proc_map,
+		(unsigned long) sysdeps.mountlist,
+		(unsigned long) sysdeps.fsusage,
+		(unsigned long) sysdeps.netload,
+		(unsigned long) sysdeps.ppp);

 	printf ("\n");
 	
@@ -223,16 +249,54 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_state (&data.proc_state, pid);

-	printf ("Proc_State   PID  %5u (0x%08lx): '%s', %c, %u, %u\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_State   PID  %5d (0x%08lx): '%s', %u - "
+		"%u, %u, %u, %u - %u, %u, %u\n", (int) pid,
 		(unsigned long) data.proc_state.flags,
 		data.proc_state.cmd, data.proc_state.state,
-		data.proc_state.uid, data.proc_state.gid);
+		data.proc_state.uid, data.proc_state.gid,
+		data.proc_state.ruid, data.proc_state.rgid,
+		data.proc_state.has_cpu, data.proc_state.processor,
+		data.proc_state.last_processor);
+#else
+	printf ("Proc_State   PID  %5d (0x%08lx): '%s', %c, %lu, %lu\n",
+		(int) pid, (unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_uid (&data.proc_uid, pid);

-	printf ("Proc_Uid     PID  %5u (0x%08lx): "
-		"%d %d %d %d %d %d %d %d %d %d %d %d\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d - %d",
+		(int) pid, (unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.suid, data.proc_uid.sgid,
+		data.proc_uid.fsuid, data.proc_uid.fsgid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice,
+		data.proc_uid.ngroups);
+
+	if (data.proc_uid.ngroups) {
+		for (i = 0; i < data.proc_uid.ngroups; i++) {
+			if (i)
+				printf (" %d", data.proc_uid.groups [i]);
+			else
+				printf (" (%d", data.proc_uid.groups [i]);
+		}
+		printf (")");
+	}
+
+	printf ("\n");
+#else
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) pid,
 		(unsigned long) data.proc_uid.flags,
 		data.proc_uid.uid, data.proc_uid.euid,
 		data.proc_uid.gid, data.proc_uid.egid,
@@ -240,19 +304,13 @@ main (int argc, char *argv [])
 		data.proc_uid.pgrp, data.proc_uid.session,
 		data.proc_uid.tty, data.proc_uid.tpgid,
 		data.proc_uid.priority, data.proc_uid.nice);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_mem (&data.proc_mem, pid);

-	getrlimit (RLIMIT_RSS, &rlim);
-
-	fprintf (stderr, "GETRLIM: %lu - %lu - %lu\n",
-		 (unsigned long) rlim.rlim_cur,
-		 (unsigned long) rlim.rlim_max,
-		 (unsigned long) ((1 << 63) - 1));
-
-	printf ("Proc_Mem     PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu\n", pid,
+	printf ("Proc_Mem     PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_mem.flags,
 		(unsigned long) data.proc_mem.size,
 		(unsigned long) data.proc_mem.vsize,
@@ -264,8 +322,32 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_segment (&data.proc_segment, pid);

-	printf ("Proc_Segment PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx\n", (int) pid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_data,
+		(unsigned long) data.proc_segment.end_data,
+		(unsigned long) data.proc_segment.start_brk,
+		(unsigned long) data.proc_segment.end_brk,
+		(unsigned long) data.proc_segment.start_stack,
+		(unsigned long) data.proc_segment.start_mmap,
+		(unsigned long) data.proc_segment.arg_start,
+		(unsigned long) data.proc_segment.arg_end,
+		(unsigned long) data.proc_segment.env_start,
+		(unsigned long) data.proc_segment.env_end);
+#else
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_segment.flags,
 		(unsigned long) data.proc_segment.text_rss,
 		(unsigned long) data.proc_segment.shlib_rss,
@@ -275,18 +357,13 @@ main (int argc, char *argv [])
 		(unsigned long) data.proc_segment.start_code,
 		(unsigned long) data.proc_segment.end_code,
 		(unsigned long) data.proc_segment.start_stack);
-
-	getrusage (RUSAGE_SELF, &ru);
-
-	fprintf (stderr, "GETRUSAGE: (%ld, %ld) - (%ld, %ld)\n",
-		 ru.ru_utime.tv_sec, ru.ru_utime.tv_usec,
-		 ru.ru_stime.tv_sec, ru.ru_stime.tv_usec);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_time (&data.proc_time, pid);

-	printf ("Proc_Time    PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", pid,
+	printf ("Proc_Time    PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_time.flags,
 		(unsigned long) data.proc_time.start_time,
 		(unsigned long) data.proc_time.rtime,
@@ -301,19 +378,33 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_signal (&data.proc_signal, pid);
 	
-	printf ("Proc_Signal  PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lx %lx %lx %lx %lx %lx %lx %lx\n", (int) pid,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal [0],
+		(unsigned long) data.proc_signal.signal [1],
+		(unsigned long) data.proc_signal.blocked [0],
+		(unsigned long) data.proc_signal.blocked [1],
+		(unsigned long) data.proc_signal.sigignore [0],
+		(unsigned long) data.proc_signal.sigignore [1],
+		(unsigned long) data.proc_signal.sigcatch [0],
+		(unsigned long) data.proc_signal.sigcatch [1]);
+#else
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_signal.flags,
 		(unsigned long) data.proc_signal.signal,
 		(unsigned long) data.proc_signal.blocked,
 		(unsigned long) data.proc_signal.sigignore,
 		(unsigned long) data.proc_signal.sigcatch);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_kernel (&data.proc_kernel, pid);

-	printf ("Proc_Kernel  PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", pid,
+	printf ("Proc_Kernel  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx (%s)\n", (int) pid,
 		(unsigned long) data.proc_kernel.flags,
 		(unsigned long) data.proc_kernel.k_flags,
 		(unsigned long) data.proc_kernel.min_flt,
@@ -327,19 +418,73 @@ main (int argc, char *argv [])

 	printf ("\n");

+	args = glibtop_get_proc_args (&data.proc_args, pid, 0);
+
+	for (i = 0; i < data.proc_args.size; i++) {
+		if (args [i]) continue;
+		args [i] = '|';
+	}
+
+	printf ("Proc_Args    PID  %5d (0x%08lx): %lu - '%s'\n", (int) pid,
+		(unsigned long) data.proc_args.flags,
+		(unsigned long) data.proc_args.size,
+		args ? args : "");
+
+	glibtop_free (args);
+
+	printf ("\n");
+
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_state (&data.proc_state, ppid);

-	printf ("Proc_State   PPID %5u (0x%08lx): '%s', %c, %u, %u\n", ppid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_State   PPID %5d (0x%08lx): '%s', %u - "
+		"%u, %u, %u, %u - %u, %u, %u\n", (int) ppid,
 		(unsigned long) data.proc_state.flags,
 		data.proc_state.cmd, data.proc_state.state,
-		data.proc_state.uid, data.proc_state.gid);
+		data.proc_state.uid, data.proc_state.gid,
+		data.proc_state.ruid, data.proc_state.rgid,
+		data.proc_state.has_cpu, data.proc_state.processor,
+		data.proc_state.last_processor);
+#else
+	printf ("Proc_State   PPID %5d (0x%08lx): '%s', %c, %lu, %lu\n",
+		(int) ppid, (unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_uid (&data.proc_uid, ppid);

-	printf ("Proc_Uid     PPID %5u (0x%08lx): "
-		"%d %d %d %d %d %d %d %d %d %d %d %d\n", ppid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Uid     PPID %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d - %d",
+		(int) ppid, (unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.suid, data.proc_uid.sgid,
+		data.proc_uid.fsuid, data.proc_uid.fsgid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice,
+		data.proc_uid.ngroups);
+
+	if (data.proc_uid.ngroups) {
+		for (i = 0; i < data.proc_uid.ngroups; i++) {
+			if (i)
+				printf (" %d", data.proc_uid.groups [i]);
+			else
+				printf (" (%d", data.proc_uid.groups [i]);
+		}
+		printf (")");
+	}
+
+	printf ("\n");
+#else
+	printf ("Proc_Uid     PPID %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) ppid,
 		(unsigned long) data.proc_uid.flags,
 		data.proc_uid.uid, data.proc_uid.euid,
 		data.proc_uid.gid, data.proc_uid.egid,
@@ -347,12 +492,13 @@ main (int argc, char *argv [])
 		data.proc_uid.pgrp, data.proc_uid.session,
 		data.proc_uid.tty, data.proc_uid.tpgid,
 		data.proc_uid.priority, data.proc_uid.nice);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_mem (&data.proc_mem, ppid);

-	printf ("Proc_Mem     PPID %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu\n", ppid,
+	printf ("Proc_Mem     PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) ppid,
 		(unsigned long) data.proc_mem.flags,
 		(unsigned long) data.proc_mem.size,
 		(unsigned long) data.proc_mem.vsize,
@@ -364,8 +510,32 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_segment (&data.proc_segment, ppid);

-	printf ("Proc_Segment PPID %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu\n", ppid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Segment PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx\n", (int) ppid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_data,
+		(unsigned long) data.proc_segment.end_data,
+		(unsigned long) data.proc_segment.start_brk,
+		(unsigned long) data.proc_segment.end_brk,
+		(unsigned long) data.proc_segment.start_stack,
+		(unsigned long) data.proc_segment.start_mmap,
+		(unsigned long) data.proc_segment.arg_start,
+		(unsigned long) data.proc_segment.arg_end,
+		(unsigned long) data.proc_segment.env_start,
+		(unsigned long) data.proc_segment.env_end);
+#else
+	printf ("Proc_Segment PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) ppid,
 		(unsigned long) data.proc_segment.flags,
 		(unsigned long) data.proc_segment.text_rss,
 		(unsigned long) data.proc_segment.shlib_rss,
@@ -375,12 +545,13 @@ main (int argc, char *argv [])
 		(unsigned long) data.proc_segment.start_code,
 		(unsigned long) data.proc_segment.end_code,
 		(unsigned long) data.proc_segment.start_stack);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_time (&data.proc_time, ppid);

-	printf ("Proc_Time    PPID %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", ppid,
+	printf ("Proc_Time    PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) ppid,
 		(unsigned long) data.proc_time.flags,
 		(unsigned long) data.proc_time.start_time,
 		(unsigned long) data.proc_time.rtime,
@@ -395,18 +566,32 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_signal (&data.proc_signal, ppid);

-	printf ("Proc_Signal  PPID %5u (0x%08lx): %lu %lu %lu %lu\n", ppid,
-		(unsigned long) data.proc_signal.flags,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Signal  PPID %5d (0x%08lx): "
+		"%lx %lx %lx %lx %lx %lx %lx %lx\n",
+		(int) ppid, (unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal [0],
+		(unsigned long) data.proc_signal.signal [1],
+		(unsigned long) data.proc_signal.blocked [0],
+		(unsigned long) data.proc_signal.blocked [1],
+		(unsigned long) data.proc_signal.sigignore [0],
+		(unsigned long) data.proc_signal.sigignore [1],
+		(unsigned long) data.proc_signal.sigcatch [0],
+		(unsigned long) data.proc_signal.sigcatch [1]);
+#else
+	printf ("Proc_Signal  PPID %5d (0x%08lx): %lu %lu %lu %lu\n",
+		(int) ppid, (unsigned long) data.proc_signal.flags,
 		(unsigned long) data.proc_signal.signal,
 		(unsigned long) data.proc_signal.blocked,
 		(unsigned long) data.proc_signal.sigignore,
 		(unsigned long) data.proc_signal.sigcatch);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_kernel (&data.proc_kernel, ppid);

-	printf ("Proc_Kernel  PPID %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", ppid,
+	printf ("Proc_Kernel  PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx (%s)\n", (int) ppid,
 		(unsigned long) data.proc_kernel.flags,
 		(unsigned long) data.proc_kernel.k_flags,
 		(unsigned long) data.proc_kernel.min_flt,
@@ -420,18 +605,72 @@ main (int argc, char *argv [])

 	printf ("\n");

+	args = glibtop_get_proc_args (&data.proc_args, ppid, 0);
+
+	for (i = 0; i < data.proc_args.size; i++) {
+		if (args [i]) continue;
+		args [i] = '|';
+	}
+
+	printf ("Proc_Args    PID  %5d (0x%08lx): %lu - '%s'\n", (int) ppid,
+		(unsigned long) data.proc_args.flags,
+		(unsigned long) data.proc_args.size,
+		args ? args : "");
+
+	glibtop_free (args);
+
+	printf ("\n");
+
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_state (&data.proc_state, 1);

-	printf ("Proc_State   INIT %5u (0x%08lx): '%s', %c, %u, %u\n", 1,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_State   INIT %5d (0x%08lx): '%s', %u - "
+		"%u, %u, %u, %u - %u, %u, %u\n", 1,
 		(unsigned long) data.proc_state.flags,
 		data.proc_state.cmd, data.proc_state.state,
-		data.proc_state.uid, data.proc_state.gid);
+		data.proc_state.uid, data.proc_state.gid,
+		data.proc_state.ruid, data.proc_state.rgid,
+		data.proc_state.has_cpu, data.proc_state.processor,
+		data.proc_state.last_processor);
+#else
+	printf ("Proc_State   INIT %5d (0x%08lx): '%s', %c, %lu, %lu\n", 1,
+		(unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_uid (&data.proc_uid, 1);

-	printf ("Proc_Uid     INIT %5u (0x%08lx): "
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Uid     INIT %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d - %d", 1,
+		(unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.suid, data.proc_uid.sgid,
+		data.proc_uid.fsuid, data.proc_uid.fsgid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice,
+		data.proc_uid.ngroups);
+
+	if (data.proc_uid.ngroups) {
+		for (i = 0; i < data.proc_uid.ngroups; i++) {
+			if (i)
+				printf (" %d", data.proc_uid.groups [i]);
+			else
+				printf (" (%d", data.proc_uid.groups [i]);
+		}
+		printf (")");
+	}
+
+	printf ("\n");
+#else
+	printf ("Proc_Uid     INIT %5d (0x%08lx): "
 		"%d %d %d %d %d %d %d %d %d %d %d %d\n", 1,
 		(unsigned long) data.proc_uid.flags,
 		data.proc_uid.uid, data.proc_uid.euid,
@@ -440,11 +679,12 @@ main (int argc, char *argv [])
 		data.proc_uid.pgrp, data.proc_uid.session,
 		data.proc_uid.tty, data.proc_uid.tpgid,
 		data.proc_uid.priority, data.proc_uid.nice);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_mem (&data.proc_mem, 1);

-	printf ("Proc_Mem     INIT %5u (0x%08lx): "
+	printf ("Proc_Mem     INIT %5d (0x%08lx): "
 		"%lu %lu %lu %lu %lu %lu\n", 1,
 		(unsigned long) data.proc_mem.flags,
 		(unsigned long) data.proc_mem.size,
@@ -457,7 +697,31 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_segment (&data.proc_segment, 1);

-	printf ("Proc_Segment INIT %5u (0x%08lx): "
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Segment INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx\n", 1,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_data,
+		(unsigned long) data.proc_segment.end_data,
+		(unsigned long) data.proc_segment.start_brk,
+		(unsigned long) data.proc_segment.end_brk,
+		(unsigned long) data.proc_segment.start_stack,
+		(unsigned long) data.proc_segment.start_mmap,
+		(unsigned long) data.proc_segment.arg_start,
+		(unsigned long) data.proc_segment.arg_end,
+		(unsigned long) data.proc_segment.env_start,
+		(unsigned long) data.proc_segment.env_end);
+#else
+	printf ("Proc_Segment INIT %5d (0x%08lx): "
 		"%lu %lu %lu %lu %lu %lu %lu %lu\n", 1,
 		(unsigned long) data.proc_segment.flags,
 		(unsigned long) data.proc_segment.text_rss,
@@ -468,11 +732,12 @@ main (int argc, char *argv [])
 		(unsigned long) data.proc_segment.start_code,
 		(unsigned long) data.proc_segment.end_code,
 		(unsigned long) data.proc_segment.start_stack);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_time (&data.proc_time, 1);

-	printf ("Proc_Time    INIT %5u (0x%08lx): "
+	printf ("Proc_Time    INIT %5d (0x%08lx): "
 		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", 1,
 		(unsigned long) data.proc_time.flags,
 		(unsigned long) data.proc_time.start_time,
@@ -488,19 +753,33 @@ main (int argc, char *argv [])
 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_signal (&data.proc_signal, 1);

-	printf ("Proc_Signal  INIT %5u (0x%08lx): "
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Signal  INIT %5d (0x%08lx): "
+		"%lx %lx %lx %lx %lx %lx %lx %lx\n", 1,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal [0],
+		(unsigned long) data.proc_signal.signal [1],
+		(unsigned long) data.proc_signal.blocked [0],
+		(unsigned long) data.proc_signal.blocked [1],
+		(unsigned long) data.proc_signal.sigignore [0],
+		(unsigned long) data.proc_signal.sigignore [1],
+		(unsigned long) data.proc_signal.sigcatch [0],
+		(unsigned long) data.proc_signal.sigcatch [1]);
+#else
+	printf ("Proc_Signal  INIT %5d (0x%08lx): "
 		"%lu %lu %lu %lu\n", 1,
 		(unsigned long) data.proc_signal.flags,
 		(unsigned long) data.proc_signal.signal,
 		(unsigned long) data.proc_signal.blocked,
 		(unsigned long) data.proc_signal.sigignore,
 		(unsigned long) data.proc_signal.sigcatch);
+#endif

 	for (c = 0; c < PROFILE_COUNT; c++)
 		glibtop_get_proc_kernel (&data.proc_kernel, 1);

-	printf ("Proc_Kernel  INIT %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", 1,
+	printf ("Proc_Kernel  INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx (%s)\n", 1,
 		(unsigned long) data.proc_kernel.flags,
 		(unsigned long) data.proc_kernel.k_flags,
 		(unsigned long) data.proc_kernel.min_flt,
@@ -512,6 +791,22 @@ main (int argc, char *argv [])
 		(unsigned long) data.proc_kernel.nwchan,
 		data.proc_kernel.wchan);

+	printf ("\n");
+
+	args = glibtop_get_proc_args (&data.proc_args, 1, 0);
+
+	for (i = 0; i < data.proc_args.size; i++) {
+		if (args [i]) continue;
+		args [i] = '|';
+	}
+
+	printf ("Proc_Args    PID  %5d (0x%08lx): %lu - '%s'\n", 1,
+		(unsigned long) data.proc_args.flags,
+		(unsigned long) data.proc_args.size,
+		args ? args : "");
+
+	glibtop_free (args);
+
 	glibtop_close ();

 	exit (0);
--- a/examples/mountlist.c
+++ b/examples/mountlist.c
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #include <locale.h>

--- a/examples/netload.c
+++ b/examples/netload.c
@@ -0,0 +1,125 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#include <glibtop/netload.h>
+
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT	1
+#endif
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_netload netload;
+	unsigned method, count, port;
+	struct in_addr addr, subnet;
+	char *address_string, *subnet_string;
+	char buffer [BUFSIZ];
+
+	count = PROFILE_COUNT;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init_r (&glibtop_global_server, 0, GLIBTOP_INIT_NO_OPEN);
+
+	glibtop_get_parameter (GLIBTOP_PARAM_METHOD, &method, sizeof (method));
+
+	printf ("Method = %d\n", method);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_COMMAND, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	printf ("Command = '%s'\n", buffer);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_HOST, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	glibtop_get_parameter (GLIBTOP_PARAM_PORT, &port, sizeof (port));
+
+	printf ("Host = '%s' - %u\n\n", buffer, port);
+
+	glibtop_init_r (&glibtop_global_server, 0, 0);
+
+	if (argc != 2)
+		glibtop_error ("Usage: %s interface", argv [0]);
+	
+	glibtop_get_netload (&netload, argv [1]);
+
+	addr.s_addr = netload.address;
+	subnet.s_addr = netload.subnet;
+
+	address_string = glibtop_strdup (inet_ntoa (addr));
+	subnet_string  = glibtop_strdup (inet_ntoa (subnet));
+
+	printf ("Network Load (0x%08lx):\n\n"
+		"\tInterface Flags:\t0x%08lx\n"
+		"\tAddress:\t\t0x%08lx - %s\n"
+		"\tSubnet:\t\t\t0x%08lx - %s\n\n"
+		"\tMTU:\t\t\t%ld\n"
+		"\tCollisions:\t\t%ld\n\n"
+		"\tPackets In:\t\t%ld\n"
+		"\tPackets Out:\t\t%ld\n"
+		"\tPackets Total:\t\t%ld\n\n"
+		"\tBytes In:\t\t%ld\n"
+		"\tBytes Out:\t\t%ld\n"
+		"\tBytes Total:\t\t%ld\n\n"
+		"\tErrors In:\t\t%ld\n"
+		"\tErrors Out:\t\t%ld\n"
+		"\tErrors Total:\t\t%ld\n\n",
+		(unsigned long) netload.flags,
+		(unsigned long) netload.if_flags,
+		(unsigned long) netload.address, address_string,
+		(unsigned long) netload.subnet,  subnet_string,
+		(unsigned long) netload.mtu,
+		(unsigned long) netload.collisions,
+		(unsigned long) netload.packets_in,
+		(unsigned long) netload.packets_out,
+		(unsigned long) netload.packets_total,
+		(unsigned long) netload.bytes_in,
+		(unsigned long) netload.bytes_out,
+		(unsigned long) netload.bytes_total,
+		(unsigned long) netload.errors_in,
+		(unsigned long) netload.errors_out,
+		(unsigned long) netload.errors_total);
+
+	glibtop_free (address_string);
+	glibtop_free (subnet_string);
+
+	glibtop_close ();
+
+	exit (0);
+}
--- a/examples/procmap.c
+++ b/examples/procmap.c
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #include <locale.h>

@@ -79,14 +81,14 @@ main (int argc, char *argv [])

 	glibtop_init_r (&glibtop_global_server, 0, 0);

-	if ((argc != 2) || (sscanf (argv [1], "%d", &pid) != 1))
+	if ((argc != 2) || (sscanf (argv [1], "%d", (int *) &pid) != 1))
 		glibtop_error ("Usage: %s pid", argv [0]);

 #ifdef GLIBTOP_INODEDB
 	inodedb = glibtop_inodedb_open (0, 0);
 #endif

-	fprintf (stderr, "Getting memory maps for pid %d.\n\n", pid);
+	fprintf (stderr, "Getting memory maps for pid %d.\n\n", (int) pid);

 	maps = glibtop_get_proc_map (&procmap, pid);

@@ -95,7 +97,7 @@ main (int argc, char *argv [])
 		unsigned device, device_major, device_minor;
 		char perm [5];
 		
-		if (maps [i].flags & (1 << GLIBTOP_MAP_ENTRY_FILENAME))
+		if (maps [i].flags & (1L << GLIBTOP_MAP_ENTRY_FILENAME))
 			filename = maps [i].filename;

 #ifdef GLIBTOP_INODEDB
@@ -114,24 +116,41 @@ main (int argc, char *argv [])
 		device_minor = (device & 255);
 		device_major = ((device >> 8) & 255);

-		if (filename)
-			fprintf (stderr, "%08lx-%08lx %08lx - "
-				 "%02x:%02x %08lu - %4s - %s\n",
+		if (filename) {
+			char *format;
+
+			if (sizeof (void*) == 8)
+				format = "%016lx-%016lx %016lx - "
+					 "%02x:%02x %08lu - %4s - %s\n";
+			else
+				format = "%08lx-%08lx %08lx - "
+					 "%02x:%02x %08lu - %4s - %s\n";
+
+			fprintf (stderr, format,
 				 (unsigned long) maps [i].start,
 				 (unsigned long) maps [i].end,
 				 (unsigned long) maps [i].offset,
 				 device_major, device_minor,
 				 (unsigned long) maps [i].inode,
 				 perm, filename);
-		else
-			fprintf (stderr, "%08lx-%08lx %08lx - "
-				 "%02x:%02x %08lu - %4s\n",
+		} else {
+			char * format;
+
+			if (sizeof (void*) == 8)
+				format = "%016lx-%016lx %016lx - "
+					 "%02x:%02x %08lu - %4s\n";
+			else
+				format = "%08lx-%08lx %08lx - "
+					 "%02x:%02x %08lu - %4s\n";
+
+			fprintf (stderr, format,
 				 (unsigned long) maps [i].start,
 				 (unsigned long) maps [i].end,
 				 (unsigned long) maps [i].offset,
 				 device_major, device_minor,
 				 (unsigned long) maps [i].inode,
 				 perm);
+		}

 		if (filename && (filename != maps [i].filename))
 			glibtop_free (filename);
--- a/examples/second.c
+++ b/examples/second.c
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #include <locale.h>

@@ -33,21 +35,70 @@ static void
 output (pid_t pid)
 {
 	glibtop_union data;
+	char *args;
+	unsigned i;
+
+#if HAVE_LIBGTOP_SMP
+	unsigned long total;
+	double p_total, p_utime, p_stime;
+	double b_total, b_utime, b_stime;
+	double s_total, s_utime, s_stime;
+	double my_utime, my_stime;
+	int ncpu;
+#endif

 	printf ("\n");
 		
 	glibtop_get_proc_state (&data.proc_state, pid);
-		
-	printf ("Proc_State   PID  %5u (0x%08lx): "
-		"'%s', %c, %u, %u\n", pid,
+
+#if LIBGTOP_VERSION_CODE > 1001000		
+	printf ("Proc_State   PID  %5d (0x%08lx): '%s', %u - "
+		"%u, %u, %u, %u - %u, %u, %u\n", (int) pid,
 		(unsigned long) data.proc_state.flags,
 		data.proc_state.cmd, data.proc_state.state,
-		data.proc_state.uid, data.proc_state.gid);
+		data.proc_state.uid, data.proc_state.gid,
+		data.proc_state.ruid, data.proc_state.rgid,
+		data.proc_state.has_cpu, data.proc_state.processor,
+		data.proc_state.last_processor);
+#else
+	printf ("Proc_State   PID  %5d (0x%08lx): "
+		"'%s', %c, %lu, %lu\n", (int) pid,
+		(unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+#endif
 		
 	glibtop_get_proc_uid (&data.proc_uid, pid);
+	
+#if LIBGTOP_VERSION_CODE > 1001000	
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d - %d",
+		(int) pid, (unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.suid, data.proc_uid.sgid,
+		data.proc_uid.fsuid, data.proc_uid.fsgid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice,
+		data.proc_uid.ngroups);
 		
-	printf ("Proc_Uid     PID  %5u (0x%08lx): "
-		"%d %d %d %d %d %d %d %d %d %d %d %d\n", pid,
+	if (data.proc_uid.ngroups) {
+		for (i = 0; i < data.proc_uid.ngroups; i++) {
+			if (i)
+				printf (" %d", data.proc_uid.groups [i]);
+			else
+				printf (" (%d", data.proc_uid.groups [i]);
+		}
+		printf (")");
+	}
+
+	printf ("\n");
+#else
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) pid,
 		(unsigned long) data.proc_uid.flags,
 		data.proc_uid.uid, data.proc_uid.euid,
 		data.proc_uid.gid, data.proc_uid.egid,
@@ -55,11 +106,12 @@ output (pid_t pid)
 		data.proc_uid.pgrp, data.proc_uid.session,
 		data.proc_uid.tty, data.proc_uid.tpgid,
 		data.proc_uid.priority, data.proc_uid.nice);
-		
+#endif
+
 	glibtop_get_proc_mem (&data.proc_mem, pid);
 		
-	printf ("Proc_Mem     PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu\n", pid,
+	printf ("Proc_Mem     PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_mem.flags,
 		(unsigned long) data.proc_mem.size,
 		(unsigned long) data.proc_mem.vsize,
@@ -70,8 +122,32 @@ output (pid_t pid)
 		
 	glibtop_get_proc_segment (&data.proc_segment, pid);

-	printf ("Proc_Segment PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx 0x%lx "
+		"0x%lx 0x%lx 0x%lx 0x%lx\n", (int) pid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_data,
+		(unsigned long) data.proc_segment.end_data,
+		(unsigned long) data.proc_segment.start_brk,
+		(unsigned long) data.proc_segment.end_brk,
+		(unsigned long) data.proc_segment.start_stack,
+		(unsigned long) data.proc_segment.start_mmap,
+		(unsigned long) data.proc_segment.arg_start,
+		(unsigned long) data.proc_segment.arg_end,
+		(unsigned long) data.proc_segment.env_start,
+		(unsigned long) data.proc_segment.env_end);
+#else
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_segment.flags,
 		(unsigned long) data.proc_segment.text_rss,
 		(unsigned long) data.proc_segment.shlib_rss,
@@ -81,11 +157,12 @@ output (pid_t pid)
 		(unsigned long) data.proc_segment.start_code,
 		(unsigned long) data.proc_segment.end_code,
 		(unsigned long) data.proc_segment.start_stack);
+#endif

 	glibtop_get_proc_time (&data.proc_time, pid);
 		
-	printf ("Proc_Time    PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", pid,
+	printf ("Proc_Time    PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_time.flags,
 		(unsigned long) data.proc_time.start_time,
 		(unsigned long) data.proc_time.rtime,
@@ -99,18 +176,32 @@ output (pid_t pid)

 	glibtop_get_proc_signal (&data.proc_signal, pid);
 	
-	printf ("Proc_Signal  PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu\n", pid,
+#if LIBGTOP_VERSION_CODE > 1001000
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lx %lx %lx %lx %lx %lx %lx %lx\n", (int) pid,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal [0],
+		(unsigned long) data.proc_signal.signal [1],
+		(unsigned long) data.proc_signal.blocked [0],
+		(unsigned long) data.proc_signal.blocked [1],
+		(unsigned long) data.proc_signal.sigignore [0],
+		(unsigned long) data.proc_signal.sigignore [1],
+		(unsigned long) data.proc_signal.sigcatch [0],
+		(unsigned long) data.proc_signal.sigcatch [1]);
+#else
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu\n", (int) pid,
 		(unsigned long) data.proc_signal.flags,
 		(unsigned long) data.proc_signal.signal,
 		(unsigned long) data.proc_signal.blocked,
 		(unsigned long) data.proc_signal.sigignore,
 		(unsigned long) data.proc_signal.sigcatch);
+#endif

 	glibtop_get_proc_kernel (&data.proc_kernel, pid);

-	printf ("Proc_Kernel  PID  %5u (0x%08lx): "
-		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", pid,
+	printf ("Proc_Kernel  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu 0x%lx 0x%lx 0x%lx (%s)\n", (int) pid,
 		(unsigned long) data.proc_kernel.flags,
 		(unsigned long) data.proc_kernel.k_flags,
 		(unsigned long) data.proc_kernel.min_flt,
@@ -123,6 +214,97 @@ output (pid_t pid)
 		data.proc_kernel.wchan);

 	printf ("\n");
+
+	args = glibtop_get_proc_args (&data.proc_args, pid, 0);
+
+	for (i = 0; i < data.proc_args.size; i++) {
+		if (args [i]) continue;
+		args [i] = '|';
+	}
+
+	printf ("Proc_Args    PID  %5d (0x%08lx): %lu - '%s'\n", (int) pid,
+		(unsigned long) data.proc_args.flags,
+		(unsigned long) data.proc_args.size,
+		args ? args : "");
+
+	glibtop_free (args);
+
+	printf ("\n");
+
+#if HAVE_LIBGTOP_SMP
+	ncpu = glibtop_global_server->ncpu;
+
+	glibtop_get_proc_time (&data.proc_time, pid);
+		
+	total = (unsigned long) data.proc_time.utime +
+		(unsigned long) data.proc_time.stime;
+
+	p_total = total ? (double) total : 1.0;
+
+	p_utime = (double) data.proc_time.utime * 100.0 / p_total;
+	p_stime = (double) data.proc_time.stime * 100.0 / p_total;
+
+	b_total = p_total / ncpu;
+	b_utime = (double) data.proc_time.utime / ncpu;
+	b_stime = (double) data.proc_time.stime / ncpu;
+
+	s_total = 0.0; s_utime = 0.0; s_stime = 0.0;
+
+	printf ("Proc_Time    PID  %5d (0x%08lx): %12lu   %12lu   %12lu\n", (int) pid,
+		(unsigned long) data.proc_time.flags, total,
+		(unsigned long) data.proc_time.utime,
+		(unsigned long) data.proc_time.stime);
+
+	for (i = 0; i < ncpu; i++) {
+		unsigned long this_total;
+
+		this_total = (unsigned long) data.proc_time.xcpu_utime [i] +
+			(unsigned long) data.proc_time.xcpu_stime [i];
+
+		printf ("CPU %3d      PID  %5d (0x%08lx): %12lu   %12lu   %12lu\n", i,
+			(int) pid, (unsigned long) data.proc_time.flags, this_total,
+			(unsigned long) data.proc_time.xcpu_utime [i],
+			(unsigned long) data.proc_time.xcpu_stime [i]);
+
+		s_total += fabs (((double) this_total) - b_total);
+		s_utime += fabs (((double) data.proc_time.xcpu_utime [i]) - b_utime);
+		s_stime += fabs (((double) data.proc_time.xcpu_stime [i]) - b_stime);
+	}
+
+	printf ("\n");
+
+	printf ("Proc_Time    PID  %5d (0x%08lx): %12.3f   %12.3f   %12.3f\n", (int) pid,
+		(unsigned long) data.proc_time.flags, 100.0, p_utime, p_stime);
+
+	for (i = 0; i < ncpu; i++) {
+		double this_p_total, this_p_utime, this_p_stime;
+		unsigned long this_total;
+
+		this_total = (unsigned long) data.proc_time.xcpu_utime [i] +
+			(unsigned long) data.proc_time.xcpu_stime [i];
+
+		this_p_total = (double) this_total * 100.0 / p_total;
+
+		this_p_utime = (double) data.proc_time.xcpu_utime [i] * 100.0 / p_total;
+		this_p_stime = (double) data.proc_time.xcpu_stime [i] * 100.0 / p_total;
+
+		printf ("CPU %3d      PID  %5d (0x%08lx): %12.3f   %12.3f   %12.3f\n", i,
+			(int) pid, (unsigned long) data.proc_time.flags,
+			this_p_total, this_p_utime, this_p_stime);
+	}
+
+	printf ("\n");
+
+	my_utime = (unsigned long) data.proc_time.utime ?
+		(double) data.proc_time.utime : 1.0;
+	my_stime = (unsigned long) data.proc_time.stime ?
+		(double) data.proc_time.stime : 1.0;
+
+	printf ("SPIN: %31s %12.3f   %12.3f   %12.3f\n", "", s_total * 100.0 / p_total,
+		s_utime * 100.0 / my_utime, s_stime * 100.0 / my_stime);
+
+	printf ("\n");
+#endif
 }

 int
@@ -189,3 +371,6 @@ main (int argc, char *argv [])

 	exit (0);
 }
+
+
+
--- a/examples/smp.c
+++ b/examples/smp.c
@@ -0,0 +1,124 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, September 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/cpu.h>
+#include <glibtop/xmalloc.h>
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_cpu cpu;
+	unsigned long frequency;
+	double total, user, nice, sys, idle;
+	double b_total, b_user, b_nice, b_sys, b_idle;
+	double s_total, s_user, s_nice, s_sys, s_idle;
+	char separator [BUFSIZ], buffer [BUFSIZ];
+	int ncpu, i;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_get_cpu (&cpu);
+
+	ncpu = glibtop_global_server->ncpu ? glibtop_global_server->ncpu : 1;
+
+	frequency = (unsigned long) cpu.frequency;
+
+	total = ((unsigned long) cpu.total) ? ((double) cpu.total) : 1.0;
+	user  = ((unsigned long) cpu.user)  ? ((double) cpu.user)  : 1.0;
+	nice  = ((unsigned long) cpu.nice)  ? ((double) cpu.nice)  : 1.0;
+	sys   = ((unsigned long) cpu.sys)   ? ((double) cpu.sys)   : 1.0;
+	idle  = ((unsigned long) cpu.idle)  ? ((double) cpu.idle)  : 1.0;
+
+	s_total = s_user = s_nice = s_sys = s_idle = 0.0;
+
+	b_total = total / ncpu;
+	b_user  = user  / ncpu;
+	b_nice  = nice  / ncpu;
+	b_sys   = sys   / ncpu;
+	b_idle  = idle  / ncpu;
+
+	memset (separator, '-', 91);
+	separator [92] = '\0';
+
+	sprintf (buffer, _("Ticks (%ld per second):"), frequency);
+
+	printf ("\n\n%-26s %12s %12s %12s %12s %12s\n%s\n", buffer,
+		_("Total"), _("User"), _("Nice"), _("Sys"), _("Idle"), separator);
+
+	printf (_("CPU          (0x%08lx): %12.0f %12.0f %12.0f %12.0f %12.0f\n\n"),
+		(unsigned long) cpu.flags, total, user, nice, sys, idle);
+
+	for (i = 0; i < glibtop_global_server->ncpu; i++) {
+		printf (_("CPU %3d      (0x%08lx): %12lu %12lu %12lu %12lu %12lu\n"), i,
+			(unsigned long) cpu.flags,
+			(unsigned long) cpu.xcpu_total [i],
+			(unsigned long) cpu.xcpu_user  [i],
+			(unsigned long) cpu.xcpu_nice  [i],
+			(unsigned long) cpu.xcpu_sys   [i],
+			(unsigned long) cpu.xcpu_idle  [i]);
+
+		s_total += fabs (((double) cpu.xcpu_total [i]) - b_total);
+		s_user  += fabs (((double) cpu.xcpu_user  [i]) - b_user);
+		s_nice  += fabs (((double) cpu.xcpu_nice  [i]) - b_nice);
+		s_sys   += fabs (((double) cpu.xcpu_sys   [i]) - b_sys);
+		s_idle  += fabs (((double) cpu.xcpu_idle  [i]) - b_idle);
+	}
+
+	printf ("%s\n\n\n", separator);
+
+	printf ("%-26s %12s %12s %12s %12s %12s\n%s\n", _("Percent:"),
+		_("Total (%)"), _("User (%)"), _("Nice (%)"), _("Sys (%)"),
+		_("Idle (%)"), separator);
+	
+	printf (_("CPU          (0x%08lx): %12.3f %12.3f %12.3f %12.3f %12.3f\n\n"),
+		(unsigned long) cpu.flags, (double) total * 100.0 / total,
+		(double) user  * 100.0 / total,
+		(double) nice  * 100.0 / total,
+		(double) sys   * 100.0 / total,
+		(double) idle  * 100.0 / total);
+
+	for (i = 0; i < glibtop_global_server->ncpu; i++) {
+		double p_total, p_user, p_nice, p_sys, p_idle;
+
+		p_total = ((double) cpu.xcpu_total [i]) * 100.0 / total;
+		p_user  = ((double) cpu.xcpu_user  [i]) * 100.0 / user;
+		p_nice  = ((double) cpu.xcpu_nice  [i]) * 100.0 / nice;
+		p_sys   = ((double) cpu.xcpu_sys   [i]) * 100.0 / sys;
+		p_idle  = ((double) cpu.xcpu_idle  [i]) * 100.0 / idle;
+
+		printf (_("CPU %3d      (0x%08lx): %12.3f %12.3f %12.3f %12.3f %12.3f\n"),
+			i, (unsigned long) cpu.flags, p_total, p_user, p_nice,
+			p_sys, p_idle);
+	}
+
+	printf ("%s\n%-26s %12.3f %12.3f %12.3f %12.3f %12.3f\n\n", separator,
+		_("Spin:"), s_total * 100.0 / total, s_user * 100.0 / user,
+		s_nice * 100.0 / nice, s_sys * 100.0 / sys, s_idle * 100.0 / idle);
+
+	exit (0);
+}
--- a/examples/sysdeps.c
+++ b/examples/sysdeps.c
@@ -0,0 +1,154 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT	1
+#endif
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_sysdeps sysdeps;
+	unsigned method, count, port;
+	char buffer [BUFSIZ];
+
+	count = PROFILE_COUNT;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init_r (&glibtop_global_server, 0, GLIBTOP_INIT_NO_OPEN);
+
+	glibtop_get_parameter (GLIBTOP_PARAM_METHOD, &method, sizeof (method));
+
+	printf ("Method = %d\n", method);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_COMMAND, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	printf ("Command = '%s'\n", buffer);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_HOST, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	glibtop_get_parameter (GLIBTOP_PARAM_PORT, &port, sizeof (port));
+
+	printf ("Host = '%s' - %u\n\n", buffer, port);
+
+	glibtop_init_r (&glibtop_global_server, 0, 0);
+
+	glibtop_get_sysdeps (&sysdeps);
+
+#define FEATURE_CHECK(f) ((sysdeps.features & (1L << GLIBTOP_SYSDEPS_##f##)) ? 1 : 0)
+
+	printf ("Sysdeps (0x%08lx):\n\n"
+		"\tfeatures:\t\t0x%08lx\n\n"
+#if LIBGTOP_VERSION_CODE > 1001000
+		"\tpointer_size:\t\t0x%08lx\n\n"
+#endif
+		"\tcpu:\t\t%d\t0x%08lx\n"
+		"\tmem:\t\t%d\t0x%08lx\n"
+		"\tswap:\t\t%d\t0x%08lx\n\n"
+		"\tuptime:\t\t%d\t0x%08lx\n"
+		"\tloadavg:\t%d\t0x%08lx\n\n"
+		"\tshm_limits:\t%d\t0x%08lx\n"
+		"\tmsg_limits:\t%d\t0x%08lx\n"
+		"\tsem_limits:\t%d\t0x%08lx\n\n"
+		"\tproclist:\t%d\t0x%08lx\n\n"
+		"\tproc_state:\t%d\t0x%08lx\n"
+		"\tproc_uid:\t%d\t0x%08lx\n"
+		"\tproc_mem:\t%d\t0x%08lx\n"
+		"\tproc_time:\t%d\t0x%08lx\n"
+		"\tproc_signal:\t%d\t0x%08lx\n"
+		"\tproc_kernel:\t%d\t0x%08lx\n"
+		"\tproc_segment:\t%d\t0x%08lx\n\n"
+		"\tproc_args:\t%d\t0x%08lx\n"
+		"\tproc_map:\t%d\t0x%08lx\n\n"
+		"\tmountlist:\t%d\t0x%08lx\n"
+		"\tfsusage:\t%d\t0x%08lx\n\n"
+		"\tnetload:\t%d\t0x%08lx\n"
+		"\tppp:\t\t%d\t0x%08lx\n\n",
+		(unsigned long) sysdeps.flags,
+		(unsigned long) sysdeps.features,
+#if LIBGTOP_VERSION_CODE > 1001000
+		(unsigned long) sysdeps.pointer_size,
+#endif
+		FEATURE_CHECK(CPU),
+		(unsigned long) sysdeps.cpu,
+		FEATURE_CHECK(MEM),
+		(unsigned long) sysdeps.mem,
+		FEATURE_CHECK(SWAP),
+		(unsigned long) sysdeps.swap,
+		FEATURE_CHECK(UPTIME),
+		(unsigned long) sysdeps.uptime,
+		FEATURE_CHECK(LOADAVG),
+		(unsigned long) sysdeps.loadavg,
+		FEATURE_CHECK(SHM_LIMITS),
+		(unsigned long) sysdeps.shm_limits,
+		FEATURE_CHECK(MSG_LIMITS),
+		(unsigned long) sysdeps.msg_limits,
+		FEATURE_CHECK(SEM_LIMITS),
+		(unsigned long) sysdeps.sem_limits,
+		FEATURE_CHECK(PROCLIST),
+		(unsigned long) sysdeps.proclist,
+		FEATURE_CHECK(PROC_STATE),
+		(unsigned long) sysdeps.proc_state,
+		FEATURE_CHECK(PROC_UID),
+		(unsigned long) sysdeps.proc_uid,
+		FEATURE_CHECK(PROC_MEM),
+		(unsigned long) sysdeps.proc_mem,
+		FEATURE_CHECK(PROC_TIME),
+		(unsigned long) sysdeps.proc_time,
+		FEATURE_CHECK(PROC_SIGNAL),
+		(unsigned long) sysdeps.proc_signal,
+		FEATURE_CHECK(PROC_KERNEL),
+		(unsigned long) sysdeps.proc_kernel,
+		FEATURE_CHECK(PROC_SEGMENT),
+		(unsigned long) sysdeps.proc_segment,
+		FEATURE_CHECK(PROC_ARGS),
+		(unsigned long) sysdeps.proc_args,
+		FEATURE_CHECK(PROC_MAP),
+		(unsigned long) sysdeps.proc_map,
+		FEATURE_CHECK(MOUNTLIST),
+		(unsigned long) sysdeps.mountlist,
+		FEATURE_CHECK(FSUSAGE),
+		(unsigned long) sysdeps.fsusage,
+		FEATURE_CHECK(NETLOAD),
+		(unsigned long) sysdeps.netload,
+		FEATURE_CHECK(PPP),
+		(unsigned long) sysdeps.ppp);
+
+	glibtop_close ();
+
+	exit (0);
+}
--- a/examples/third.c
+++ b/examples/third.c
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #include <locale.h>

--- a/examples/timings.c
+++ b/examples/timings.c
@@ -0,0 +1,357 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#include <glibtop/union.h>
+#include <glibtop/sysdeps.h>
+
+#include <sys/times.h>
+#include <sys/resource.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT			100000L
+#endif
+
+#ifndef PROFILE_COUNT_EXPENSIVE
+#define PROFILE_COUNT_EXPENSIVE		10000L
+#endif
+
+#define ELAPSED_UTIME ((unsigned long) elapsed_utime.tv_sec * 1000000 +	(unsigned long) elapsed_utime.tv_usec)
+#define ELAPSED_STIME ((unsigned long) elapsed_stime.tv_sec * 1000000 + (unsigned long) elapsed_stime.tv_usec)
+
+#define libgtop_timeradd(tvp, uvp, vvp)						\
+	do {								\
+		(vvp)->tv_sec = (tvp)->tv_sec + (uvp)->tv_sec;		\
+		(vvp)->tv_usec = (tvp)->tv_usec + (uvp)->tv_usec;	\
+		if ((vvp)->tv_usec >= 1000000) {			\
+			(vvp)->tv_sec++;				\
+			(vvp)->tv_usec -= 1000000;			\
+		}							\
+	} while (0)
+#define libgtop_timersub(tvp, uvp, vvp)						\
+	do {								\
+		(vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec;		\
+		(vvp)->tv_usec = (tvp)->tv_usec - (uvp)->tv_usec;	\
+		if ((vvp)->tv_usec < 0) {				\
+			(vvp)->tv_sec--;				\
+			(vvp)->tv_usec += 1000000;			\
+		}							\
+	} while (0)
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_union data;
+	unsigned c, count, *ptr;
+	struct rusage total_start, total_end;
+	struct rusage rusage_start, rusage_end;
+	struct timeval elapsed_utime, elapsed_stime;
+	pid_t pid;
+
+	count = PROFILE_COUNT;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+
+	printf ("%-12s (%-10s): %7s - %9s - %9s\n",
+		"Feature", "Flags", "Count", "utime", "stime");
+	printf ("-------------------------------------------"
+		"---------------\n");
+	
+	glibtop_init_r (&glibtop_global_server, 0, 0);
+
+	getrusage (RUSAGE_SELF, &total_start);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_cpu (&data.cpu);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("CPU          (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.cpu.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT_EXPENSIVE; c++)
+		glibtop_get_mem (&data.mem);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Memory       (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.mem.flags, PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_STIME / PROFILE_COUNT_EXPENSIVE);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT_EXPENSIVE; c++)
+		glibtop_get_swap (&data.swap);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Swap         (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.swap.flags, PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_STIME / PROFILE_COUNT_EXPENSIVE);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_uptime (&data.uptime);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Uptime       (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.uptime.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_loadavg (&data.loadavg);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Loadavg      (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.loadavg.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	printf ("\n");
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT_EXPENSIVE; c++) {
+		ptr = glibtop_get_proclist (&data.proclist, 0, 0);
+		glibtop_free (ptr);
+	}
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proclist     (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proclist.flags,
+		PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT_EXPENSIVE,
+		(long double) ELAPSED_STIME / PROFILE_COUNT_EXPENSIVE);
+
+	pid = getpid ();
+
+	printf ("\n");
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_state (&data.proc_state, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_State   (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_state.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_uid (&data.proc_uid, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Uid     (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_uid.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_mem (&data.proc_mem, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Mem     (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_mem.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_segment (&data.proc_segment, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Segment (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_segment.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_time (&data.proc_time, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Time    (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_time.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_signal (&data.proc_signal, pid);
+	
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Signal  (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_signal.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+
+	getrusage (RUSAGE_SELF, &rusage_start);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_kernel (&data.proc_kernel, pid);
+
+	getrusage (RUSAGE_SELF, &rusage_end);
+
+	libgtop_timersub (&rusage_end.ru_utime, &rusage_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&rusage_end.ru_stime, &rusage_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("Proc_Kernel  (0x%08lx): %7lu - %9.2Lf - %9.2Lf\n",
+		(unsigned long) data.proc_kernel.flags, PROFILE_COUNT,
+		(long double) ELAPSED_UTIME / PROFILE_COUNT,
+		(long double) ELAPSED_STIME / PROFILE_COUNT);
+	
+	getrusage (RUSAGE_SELF, &total_end);
+
+	libgtop_timersub (&total_end.ru_utime, &total_start.ru_utime,
+			  &elapsed_utime);
+
+	libgtop_timersub (&total_end.ru_stime, &total_start.ru_stime,
+			  &elapsed_stime);
+
+	printf ("-------------------------------------------"
+		"---------------\n");
+
+	printf ("%-36s %9lu - %9lu\n\n", "TOTAL",
+		ELAPSED_UTIME, ELAPSED_STIME);
+
+	printf ("All timings are in clock ticks "
+		"(1000000 ticks per second).\n\n");
+
+	glibtop_close ();
+
+	exit (0);
+}
--- a/features.def
+++ b/features.def
@@ -1,8 +1,8 @@
-void|cpu|ulong(total,user,nice,sys,idle,frequency)
+void|cpu|ulong(total,user,nice,sys,idle,frequency,xcpu_total[4],xcpu_user[4],xcpu_nice[4],xcpu_sys[4],xcpu_idle[4])
 void|mem|ulong(total,used,free,shared,buffer,cached,user,locked)
 void|swap|ulong(total,used,free,pagein,pageout)
 void|uptime|double(uptime,idletime)
-void|loadavg|double(loadavg[0],loadavg[1],loadavg[2]):ulong(nr_running,nr_tasks,last_pid)
+void|loadavg|double(loadavg[3]):ulong(nr_running,nr_tasks,last_pid)
 void|shm_limits|ulong(shmmax,shmmin,shmmni,shmseg,shmall)
 void|msg_limits|ulong(msgpool,msgmap,msgmax,msgmnb,msgmni,msgssz,msgtql)
 void|sem_limits|ulong(semmap,semmni,semmns,semmnu,semmsl,semopm,semume,semusz,semvmx,semaem)
@@ -10,10 +10,13 @@ unsigned *|proclist|ulong(number,size,total)|long(which,arg)
 void|proc_state|str(cmd):char(state):ulong(uid,gid)|pid_t(pid)
 void|proc_uid|long(uid,euid,gid,egid,pid,ppid,pgrp,session,tty,tpgid,priority,nice)|pid_t(pid)
 void|proc_mem|long(size,vsize,resident,share,rss,rss_rlim)|pid_t(pid)
-void|proc_time|long(start_time,rtime,utime,stime,cutime,cstime,timeout,it_real_value,frequency)|pid_t(pid)
-void|proc_signal|ulong(signal,blocked,sigignore,sigcatch)|pid_t(pid)
+void|proc_time|long(start_time,rtime,utime,stime,cutime,cstime,timeout,it_real_value,frequency,xcpu_utime[4],xcpu_stime[4])|pid_t(pid)
+void|proc_signal|ulong(signal[2],blocked[2],sigignore[2],sigcatch[2])|pid_t(pid)
 void|proc_kernel|ulong(k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt,kstk_esp,kstk_eip,nwchan):str(wchan)|pid_t(pid)
 void|proc_segment|ulong(text_rss,shlib_rss,data_rss,stack_rss,dirty_size,start_code,end_code,start_stack)|pid_t(pid)
+char *|proc_args|ulong(size)|pid_t(pid):unsigned(max_len)
 glibtop_map_entry *|proc_map|ulong(number,size,total)|pid_t(pid)
-glibtop_mountentry *|@mountlist|ulong(number,size,total)|pid_t(all_fs)
+glibtop_mountentry *|@mountlist|ulong(number,size,total)|int(all_fs)
 void|@fsusage|ulong(blocks,bfree,bavail,files,ffree)|string|mount_dir
+void|netload|ulong(if_flags,mtu,subnet,address,packets_in,packets_out,packets_total,bytes_in,bytes_out,bytes_total,errors_in,errors_out,errors_total,collisions)|string|interface
+void|ppp|ulong(state,bytes_in,bytes_out)|ushort(device)
--- a/glibtop.h
+++ b/glibtop.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_H__
 #define __GLIBTOP_H__
@@ -50,6 +52,7 @@ struct _glibtop
 	int input [2];			/* Pipe client <- server */
 	int output [2];			/* Pipe client -> server */
 	int socket;			/* Accepted connection of a socket */
+	int ncpu;			/* Number of CPUs, zero if single-processor */
 	unsigned long os_version_code;	/* Version code of the operating system */
 	const char *name;		/* Program name for error messages */
 	const char *server_command;	/* Command used to invoke server */
@@ -71,14 +74,21 @@ extern const unsigned long glibtop_server_features;

 #define glibtop_close()	glibtop_close_r(glibtop_global_server);

-extern glibtop *glibtop_init_r __P((glibtop **, unsigned long, unsigned));
-extern glibtop *glibtop_init_s __P((glibtop **, unsigned long, unsigned));
+glibtop *
+glibtop_init_r (glibtop **server_ptr,
+		unsigned long features,
+		unsigned flags);
+
+glibtop *
+glibtop_init_s (glibtop **server_ptr,
+		unsigned long features,
+		unsigned flags);

 #ifdef GLIBTOP_GUILE

 /* You need to link with -lgtop_guile to get this stuff here. */

-extern void glibtop_boot_guile __P((void));
+void glibtop_boot_guile (void);

 #endif

@@ -86,7 +96,7 @@ extern void glibtop_boot_guile __P((void));

 /* You need to link with -lgtop_guile_names to get this stuff here. */

-extern void glibtop_boot_guile_names __P((void));
+void glibtop_boot_guile_names (void);

 #ifndef GLIBTOP_NAMES
 #define GLIBTOP_NAMES
--- a/guile/ChangeLog
+++ b/guile/ChangeLog
@@ -1,9 +0,0 @@
-1998-07-29  Martin Baulig  <martin@home-of-linux.org>
-
-	* dynamic.c, dynamic_names.c: New files.
-
-	* Makefile.am: New file. Creates `libgtop.so' and
-	`libnames.so' which will be installed in
-	`$(datadir)/guile/libgtop'; just do a
-	`(use-modules (libgtop libgtop) (libgtop names))' in
-	guile to use them.
--- a/guile/Makefile.am
+++ b/guile/Makefile.am
@@ -1,60 +0,0 @@
-LINK				= $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
-
-CFLAGS				= -Wall -W @CFLAGS@
-
-sitedir = $(datadir)/guile/site
-libgtopmoduledir = $(datadir)/guile/libgtop
-
-libgtopmodule_LTLIBRARIES	= libgtop.la libnames.la
-
-libgtop_la_SOURCES		= dynamic.c
-
-libnames_la_SOURCES		= dynamic_names.c
-
-libgtop_la_LIBADD		= ../sysdeps/guile/guile.lo \
-				  ../lib/init.lo \
-				  ../lib/open.lo \
-				  ../lib/close.lo \
-				  ../lib/command.lo \
-				  ../lib/read.lo \
-				  ../lib/read_data.lo \
-				  ../lib/write.lo \
-				  ../lib/lib.lo \
-				  ../lib/parameter.lo \
-				  ../lib/sysdeps.lo \
-				  ../sysdeps/common/error.lo \
-				  ../sysdeps/common/fsusage.lo \
-				  ../sysdeps/common/gnuslib.lo \
-				  ../sysdeps/common/mountlist.lo \
-				  ../sysdeps/common/xmalloc.lo \
-				  ../sysdeps/@sysdeps_dir@/close.lo \
-				  ../sysdeps/@sysdeps_dir@/proclist.lo \
-				  ../sysdeps/@sysdeps_dir@/sem_limits.lo \
-				  ../sysdeps/@sysdeps_dir@/cpu.lo \
-				  ../sysdeps/@sysdeps_dir@/procmem.lo \
-				  ../sysdeps/@sysdeps_dir@/shm_limits.lo \
-				  ../sysdeps/@sysdeps_dir@/loadavg.lo \
-				  ../sysdeps/@sysdeps_dir@/procsegment.lo \
-				  ../sysdeps/@sysdeps_dir@/siglist.lo \
-				  ../sysdeps/@sysdeps_dir@/mem.lo \
-				  ../sysdeps/@sysdeps_dir@/procsignal.lo \
-				  ../sysdeps/@sysdeps_dir@/swap.lo \
-				  ../sysdeps/@sysdeps_dir@/msg_limits.lo \
-				  ../sysdeps/@sysdeps_dir@/procstate.lo \
-				  ../sysdeps/@sysdeps_dir@/uptime.lo \
-				  ../sysdeps/@sysdeps_dir@/open.lo \
-				  ../sysdeps/@sysdeps_dir@/proctime.lo \
-				  ../sysdeps/@sysdeps_dir@/prockernel.lo \
-				  ../sysdeps/@sysdeps_dir@/procuid.lo \
-				  ../sysdeps/@sysdeps_dir@/procmap.lo
-
-libnames_la_LIBADD		= ../sysdeps/guile/names/guile-names.lo
-
-EXTRA_DIST			= features.awk
-
-CLEANFILES			= features.scm
-
-features.scm: features.awk $(top_builddir)/config.h $(top_srcdir)/features.def
-	$(AWK) -f $(srcdir)/features.awk < $(top_srcdir)/features.def > tmp-t
-	mv tmp-t features.scm
-
--- a/guile/dynamic.c
+++ b/guile/dynamic.c
@@ -1,29 +0,0 @@
-/* $Id$ */
-
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
-   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
-
-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <glibtop.h>
-#include <libguile/dynl.h>
-
-void
-scm_init_libgtop_libgtop_module (void)
-{
-	scm_register_module_xxx ("libgtop libgtop", glibtop_boot_guile);
-}
--- a/guile/dynamic_names.c
+++ b/guile/dynamic_names.c
@@ -1,29 +0,0 @@
-/* $Id$ */
-
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
-   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
-
-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <glibtop.h>
-#include <libguile/dynl.h>
-
-void
-scm_init_libgtop_names_module (void)
-{
-	scm_register_module_xxx ("libgtop names", glibtop_boot_guile_names);
-}
--- a/guile/features.awk
+++ b/guile/features.awk
@@ -1,61 +0,0 @@
-BEGIN {
-	string = "";
-	names = "";
-}
-
-function output(line) {
-	split (line, line_fields, /\|/);
-	retval = line_fields[1];
-	feature = line_fields[2];
-	param_def = line_fields[4];
-	
-	orig = feature; sub(/^@/,"",feature);
-	space = feature; gsub(/./," ",space);
-
-	if (string == "")
-		string = " '(";
-	else
-		string = string"   ";
-	string = string"(\""feature"\" (\""retval"\"";
-
-	feature_nounder = feature;
-	sub(/_/, "-", feature_nounder);
-
-	if (names == "")
-		names = " '(";
-	else
-		names = names"   ";
-	names = names"(\""feature"\" \""feature_nounder"\")\n";
-	
-	nr_params = split (param_def, params, /:/);
-	for (param = 1; param <= nr_params; param++) {
-		list = params[param];
-		type = params[param];
-		sub(/\(.*/, "", type);
-		sub(/^\w+\(/, "", list); sub(/\)$/, "", list);
-
-		string = string" (\""type"\"";
-
-		count = split (list, fields, /,/);
-		for (field = 1; field <= count; field++) {
-			string = string" \""fields[field]"\"";
-		}
-
-		string = string")";
-	}
-
-	string = string"))\n";
-}
-	
-/^[^#]/		{ output($0) }
-
-
-END {
-	print "(define libgtop-features";
-	print string"  )";
-	print ")\n";
-
-	print "(define libgtop-feature-names";
-	print names"  )";
-	print ")\n";
-}
--- a/guile/header.scm
+++ b/guile/header.scm
@@ -1,440 +0,0 @@
-;; $Id$
-
-(define cpu-type '(("name"	. "cpu")
-		   ("label"	. "CPU Usage")
-		   ("fields"	. (list
-				   (("name"	. "total")
-				    ("label"	. "Total CPU Usage")
-				    ("type"	. "unsigned long"))
-				   (("name"	. "user")
-				    ("type"	. "unsigned long"))
-				   (("name"	. "nice")
-				    ("type"	. "unsigned long"))
-				   (("name"	. "sys")
-				    ("type"	. "unsigned long"))
-				   (("name"	. "idle")
-				    ("type"	. "unsigned long"))
-				   (("name"	. "name")
-				    ("type"	. "const char")
-				    ("pointer"	. #t))
-				   (("name"	. "test"))
-				   )
-				)
-		   )
-  )
-
-(define main-function
-  (lambda (definition)
-    (letrec ((default-type "unsigned long")
-	     (struct-label-comments #t)
-	     (struct-name-comments #f)
-	     (default-name-tabs-first 3)
-	     (default-name-tabs 4)
-	     (default-type-tabs 2)
-	     (default-comment-tabs 5)
-	     (default-definition-tabs 3)
-	     (default-definition-value-tabs 2)
-	     (default-max-line-length 60)
-	     ;; set default values for unspecified fields
-	     (check-field-definition
-	      (lambda (fields)
-		(let ((newlist (list)))
-		  (for-each
-		   (lambda (field)
-		     (if (not (assoc-ref field "type"))
-			 (set! field (assoc-set! field "type" default-type)))
-		     (if (assoc-ref field "label")
-			 (set! field (assoc-set! field "has-label" #t))
-			 (begin
-			   (set! field (assoc-set! field "label" (assoc-ref field "name")))
-			   (set! field (assoc-set! field "has-label" #f))
-			   )
-			 )
-		     (set! newlist (append newlist (list field)))
-		     )
-		   (cdr fields))
-		  (set-cdr! fields newlist)
-		  )
-		)
-	      )
-	     ;; number fields sequentially
-	     (make-field-numbers
-	      (lambda (fields)
-		(let ((pos 0) (newlist (list)))
-		  (for-each
-		   (lambda (field)
-		     (set! field (assoc-set! field "number" pos))
-		     (set! newlist (append newlist (list field)))
-		     (set! pos (+ pos 1))
-		     )
-		   (cdr fields))
-		  (set-cdr! fields newlist)
-		  (set! definition (assoc-set! definition "max-fields" pos))
-		  )
-		)
-	      )
-	     ;; pad string with up to 'tabs' tabs
-	     (tabify-string
-	      (lambda (string tabs)
-		(let ((length (string-length string))
-		      (tlength (* tabs 8)))
-		  (if (> tlength length)
-		      (let* ((diff (- tlength length))
-			     (count (quotient (+ diff 7) 8)))
-			(string-append string
-				       (make-string count #\tab))
-			)
-		      (string-append string
-				     #\space)
-		      )
-		  )
-		)
-	      )
-	     ;; pad string with spaces
-	     (spacify-string
-	      (lambda (string tabs)
-		(let ((length (string-length string))
-		      (tlength (* tabs 8)))
-		  (if (> tlength length)
-		      (string-append string
-				     (make-string (- tlength length) #\space))
-		      (string-append string
-				     #\space)
-		      )
-		  )
-		)
-	      )
-	     ;; creates comment string
-	     (make-comment-string
-	      (lambda (comment)
-		(if comment
-		    (string "/* "
-			    (spacify-string comment
-					    default-comment-tabs)
-			    " */")
-		    (string)
-		    )
-		)
-	      )
-	     ;; create constant for entry (eg. GLIBTOP_CPU_TOTAL)
-	     (entry-constant-name
-	      (lambda (name)
-		(string-upcase! (string "GLIBTOP_"
-					(assoc-ref definition "name")
-					"_"
-					name
-					)
-				)
-		)
-	      )
-	     ;; create text that is displayed as comment along with entry
-	     (entry-comment-text
-	      (lambda (name label)
-		(if label
-		    (if struct-label-comments label #f)
-		    (if struct-name-comments (entry-constant-name name) #f)
-		    )
-		)
-	      )
-	     ;; starts struct definition
-	     (make-struct-definition-head
-	      (lambda ()
-		(let* ((class (assoc-ref definition "name"))
-		       )
-		  (string "struct _glibtop_" class "\n"
-			  "{\n"
-			  )
-		  )
-		)
-	      )
-	     ;; terminates struct definition
-	     (make-struct-definition-tail
-	      (lambda ()
-		(string "};\n\n")
-		)
-	      )
-	     ;; generate struct definition body
-	     (make-struct-definition-body
-	      (lambda (fields)
-		(letrec ((output (string))
-			 (is-first-entry #t)
-			 (current-type #f)
-			 (current-name #f)
-			 (current-label #f)
-			 (current-pointer #f)
-			 ;; close entry (other = next entry is of other type)
-			 (entry-end
-			  (lambda (other)
-			    (let ((old-first is-first-entry))
-			      (set! is-first-entry other)
-			      (if current-type
-				  (string (tabify-string (string (string (if current-pointer "*" ""))
-								 current-name
-								 (string (if other ";" ","))
-								 )
-							 (if old-first
-							     default-name-tabs-first
-							     default-name-tabs
-							     )
-							 )
-					  (make-comment-string (entry-comment-text
-								current-name current-label))
-					  "\n")
-				  (string)
-				  )
-			      )
-			    )
-			  )
-			 ;; start new entry
-			 (entry-start
-			  (lambda (name type)
-			    (if current-type
-				(if (equal? current-type type)
-				    (string (entry-end #f) "\t\t")
-				    (string (entry-end #t) "\t"
-					    (tabify-string type default-type-tabs)
-					    )
-				    )
-				(string "\t"
-					(tabify-string type default-type-tabs)
-					)
-				)
-			    )
-			  )
-			 )
-		  ;; main function
-		  (for-each
-		   (lambda (field)
-		     (let ((name (assoc-ref field "name"))
-			   (type (assoc-ref field "type"))
-			   (pointer (assoc-ref field "pointer"))
-			   (label (if (assoc-ref field "has-label")
-				      (assoc-ref field "label")
-				      #f)
-				  )
-			   )
-		       (set! output (string-append output
-						   (string (entry-start name type))
-						   )
-			     )
-		       ;; save current data
-		       (set! current-type type)
-		       (set! current-name name)
-		       (set! current-label label)
-		       (set! current-pointer pointer)
-		       )
-		     )
-		   (cdr fields))
-		  ;; close last entry
-		  (string-append output (entry-end #t))
-		  )
-		)
-	      )
-	     ;; display complete struct definition
-	     (make-struct-definition
-	      (lambda (fields)
-		(string-append (make-struct-definition-head)
-			       (make-struct-definition-body fields)
-			       (make-struct-definition-tail)
-			       )
-		)
-	      )
-	     ;; make constant definition
-	     (make-const-definition
-	      (lambda (name value comment)
-		(let* ((nstring  (string-upcase! (string "GLIBTOP_" name)))
-		       (tabname  (tabify-string nstring default-definition-tabs))
-		       (tabvalue (if comment
-				     (tabify-string (string value) default-definition-value-tabs)
-				     (string value))
-				 )
-		       (ctext    (make-comment-string comment))
-		       (line     (string "#define " tabname tabvalue ctext "\n"))
-		       )
-		  line)
-		)
-	      )
-	     ;; creates constant definitions
-	     (make-struct-constants
-	      (lambda (fields)
-		(let ((class  (assoc-ref definition "name"))
-		      (output (string))
-		      )
-		  (for-each
-		   (lambda (field)
-		     (let* ((name   (assoc-ref field "name"))
-			    (number (assoc-ref field "number"))
-			    (key    (string class "_" name))
-			    (value  (number->string number))
-			    (label  (if (assoc-ref field "has-label")
-					(assoc-ref field "label")
-					#f)
-				    )
-			    (line   (make-const-definition key
-							   value 
-							   (entry-comment-text name label)
-							   )
-				    )
-			    )
-		       (set! output (string-append output line))
-		       )
-		     )
-		   (cdr fields))
-		  output)
-		)
-	      )
-	     ;; creates definition of maximum constant
-	     (make-struct-max-constant
-	      (lambda ()
-		(let* ((class (assoc-ref definition "name"))
-		       (max   (assoc-ref definition "max-fields"))
-		       )
-		  (make-const-definition (string "MAX_" class)
-					 (number->string max)
-					 #f)
-		  )
-		)
-	      )
-	     ;; adds new list element to string, inserting newline if necessary
-	     (add-to-string
-	      (lambda (output line element separator indent max-length)
-		(let* ((slen (string-length line))
-		       (elen (string-length element))
-		       (tlen (+ slen elen))
-		       (bsep (if separator 
-				 (string separator " ")
-				 (string)
-				 )
-			     )
-		       (nsep (string (if separator separator "") "\n"))
-		       )
-		  (if (and (> slen 0) (> tlen max-length))
-		      (begin
-			(set! output (string-append output line nsep))
-			(set! line (string indent element))
-			)
-		      (set! line (string-append line bsep element))
-		      )
-		  (list output line)
-		  )
-		)
-	      )
-	     ;; create general list definition
-	     (make-general-list-definition
-	      (lambda (fields name symbol line-length make-element-string)
-		(letrec ((class (assoc-ref definition "name"))
-			 (make-general-list-definition-head
-			  (lambda ()
-			    (string "const char *"
-				    "glibtop_"
-				    symbol
-				    "_"
-				    class
-				    " "
-				    "[GLIBTOP_MAX_"
-				    (string-upcase! (string class))
-				    "] = \n{ "
-				    )
-			    )
-			  )
-			 (make-general-list-definition-tail
-			  (lambda ()
-			    (string "\n};\n")
-			    )
-			  )
-			 (make-general-list-definition-body
-			  (lambda ()
-			    (let* ((first #t) (output (string)) (line (string)))
-			      (for-each
-			       (lambda (field)
-				 (let* ((element (assoc-ref field name))
-					(olist   (add-to-string output line
-								(make-element-string element)
-								(if first #f ",")
-								"  "
-								line-length))
-					)
-				   (set! output (car olist))
-				   (set! line (car (cdr olist)))
-				   (set! first #f)
-				   )
-				 )
-			       (cdr fields))
-			      (set! output (string-append output line))
-			      output)
-			    )
-			  )
-			 )
-		  ;; main function
-		  (string-append (make-general-list-definition-head)
-				 (make-general-list-definition-body)
-				 (make-general-list-definition-tail)
-				 )
-		  )
-		)
-	      )
-	     ;; create name list definition
-	     (make-name-list-definition
-	      (lambda (fields)
-		(make-general-list-definition fields
-					      "name"
-					      "names"
-					      default-max-line-length
-					      (lambda (x)
-						(string #\" x #\")
-						)
-					      )
-		)
-	      )
-	     ;; create label list definition
-	     (make-label-list-definition
-	      (lambda (fields)
-		(make-general-list-definition fields
-					      "label"
-					      "labels"
-					      0
-					      (lambda (x)
-						(string "gettext_noop (" #\" x #\" ")")
-						)
-					      )
-		)
-	      )
-	     ;; create description list definition
-	     (make-description-list-definition
-	      (lambda (fields)
-		(make-general-list-definition fields
-					      "description"
-					      "descriptions"
-					      default-max-line-length
-					      (lambda (x)
-						(if x
-						    (string "gettext_noop (" #\" x #\" ")")
-						    (string "NULL")
-						    )
-						)
-					      )
-		)
-	      )
-	     )
-      ;; start of main function
-      (let ((fielddef (assoc-ref definition "fields")))
-	(display fielddef) (newline) (newline)
-	(check-field-definition fielddef)
-	(make-field-numbers fielddef)
-	(display fielddef) (newline) (newline)
-	(display (make-struct-definition fielddef))
-	(display (make-struct-constants fielddef)) (newline)
-	(display (make-struct-max-constant)) (newline) (newline)
-	(display (make-name-list-definition fielddef)) (newline)
-	(display (make-label-list-definition fielddef)) (newline)
-	(display (make-description-list-definition fielddef)) (newline)
-	)
-      )
-    )
-  )
-
-(begin
-  (main-function cpu-type)
-  (newline)
-  )
-
--- a/guile/make-docbook.scm
+++ b/guile/make-docbook.scm
@@ -1,346 +0,0 @@
-;; $Id$
-
-(load "features.scm")
-
-(define sysdeps-list '())
-
-(define type-names '("void"
-		     "int64_t" "u_int64_t" "double"
-		     "int" "char" "const char *"))
-
-(define make-sysdeps-list
-  (lambda ()
-    (letrec ((names (cdr (glibtop-names-sysdeps)))
-	     (labels (cdr (glibtop-labels-sysdeps)))
-	     (descriptions (cdr (glibtop-descriptions-sysdeps)))
-	     )
-      (for-each (lambda (feature)
-		  (let* ((label (car labels))
-			 (description (car descriptions))
-			 (list '())
-			 )
-		    (set! labels (cdr labels))
-		    (set! descriptions (cdr descriptions))
-		    (set! list (assoc-set! list 'name feature))
-		    (set! list (assoc-set! list 'label label))
-		    (set! list (assoc-set! list 'description description))
-		    (set! sysdeps-list (assoc-set! sysdeps-list feature list))
-		    )
-		  )
-		names)
-      )
-    )
-  )
-
-(define make-function-reference
-  (lambda (feature)
-    (let* ((names (eval-string (string "(glibtop-names-" feature ")")))
-	   (types (eval-string (string "(glibtop-types-" feature ")")))
-	   (labels (eval-string (string "(glibtop-labels-" feature ")")))
-	   (sysdeps (assoc-ref sysdeps-list feature))
-	   (retval (car (car (assoc-ref libgtop-features feature))))
-	   (name (assoc-ref sysdeps 'name))
-	   (label (assoc-ref sysdeps 'label))
-	   (description (assoc-ref sysdeps 'description))
-	   (descriptions (eval-string (string "(glibtop-descriptions-" feature ")")))
-	   (feature_nounder (car (assoc-ref libgtop-feature-names feature)))
-	   (decl-list '()) (field-list '())
-
-	   (synopsis-start-string
-	    (string "<para>Automatically generated function synopsis:\n\n"))
-
-	   (section-string
-	    (string "<sect1>\n"
-		    "<title><function>glibtop_get_" feature "()</function> - "
-		    label "</title>\n\n")
-	    )
-
-	   (description-string
-	    (string "<para>\nAutomatically generated description:\n\n"
-		    "<blockquote>\n<literallayout>\n"
-		    description "\n"
-		    "</literallayout>\n</blockquote>\n\n")
-	    )
-	   
-	   (definition-start-string
-	     (string "<para>Automatically generated declaration of "
-		     "<structname>_glibtop_" feature "</structname>:\n\n")
-	     )
-
-	   (param-description-start-string
-	    (string "<para>Automatically generated descriptions of "
-		    "<structname>_glibtop_" feature "</structname>:\n\n")
-	    )
-
-	   (funcsynopsisinfo-string
-	    (string "<funcsynopsisinfo>\n"
-		    "#include &lt;glibtop.h&gt;\n"
-		    "#include &lt;glibtop/" feature ".h&gt;"
-		    "</funcsynopsisinfo>")
-	    )
-
-	   (funcdef-string
-	    (string "<funcdef>" retval " "
-		    "<function>glibtop_get_" feature "_l</function>"
-		    "</funcdef>\n")
-	    )
-
-	   (paramdef-string
-	    (lambda ()
-	      (let ((start (string "<paramdef>glibtop *<parameter>"
-				   "server</parameter>, glibtop_"
-				   feature " *<parameter>" feature
-				   "</parameter>")
-			   )
-		    (param_string (string))
-		    (end (string "\n</paramdef>"))
-		    (param_lists
-		     (cdr (car (assoc-ref libgtop-features feature))))
-		    )
-		(for-each
-		 (lambda (x)
-		   (let ((type (car x))
-			 (params (cdr x))
-			 )
-		     (for-each
-		      (lambda (param)
-			(set! param_string (string param_string
-						   ", " type
-						   " <parameter>"
-						   param
-						   "</parameter>"
-						   )
-			      )
-			)
-		      params)
-		     )
-		   )
-		 param_lists)
-		(string start param_string end))
-	      )
-	    )
-
-	   (funcdef-noserver-string
-	    (string "<funcdef>" retval " "
-		    "<function>glibtop_get_" feature "</function>"
-		    "</funcdef>\n")
-	    )
-
-	   (paramdef-noserver-string
-	    (string "<paramdef>glibtop_" feature " *"
-		    "<parameter>" feature "</parameter>\n"
-		    "</paramdef>")
-	    )
-
-	   (field-name-constant
-	    (lambda (name field)
-	      (string "GLIBTOP_"
-		      (string-upcase! (string name))
-		      "_"
-		      (string-upcase! (string field)))
-	      )
-	    )
-
-	   (make-struct-name
-	    (lambda (type)
-	      (string "glibtop_" (assoc-ref type "name"))
-	      )
-	    )
-	   
-	   (tab-pad-string
-	    (lambda (string tabs)
-	      (let* ((slength (string-length string))
-		     (tlength (* tabs 8)))
-		(string-append string
-			       (make-string 
-				(if (> tlength slength)
-				    (- tlength slength)
-				    1
-				    )
-				#\space))
-		)
-	      )
-	    )
-
-	   (make-field-list
-	     (lambda (name type fields)
-	       (let* ((output (string)) (pos 1))
-		 (map
-		  (lambda (x)
-		    (let* ((sep   (if (= pos (length fields)) ";" ","))
-			   (start (if (= pos 1)
-				      (string "\t"
-					      (tab-pad-string (string type) 2))
-				      (string "\t\t"))
-				  )
-			   (comment (string (if (= pos 1) "" "\t") "/* "
-					    (tab-pad-string
-					     (field-name-constant name (car x)) 4)
-					    " */"))
-			   (field (tab-pad-string
-				   (string-append (string (car x)) sep) 2))
-			   )
-		      (set! pos (+ pos 1))
-		      (string-append start field comment "\n")
-		      )
-		    )
-		  fields)
-		 )
-	       )
-	     )
-
-	   (init-field-list
-	    (lambda ()
-	      (let* ((old-type #f)
-		     (type-list types)
-		     (new-type #f)
-		     (fields (list))
-		     )
-		(for-each
-		 (lambda (x)
-		   (set! new-type (car type-list))
-		   (set! type-list (cdr type-list))
-		   (set! new-type (list-ref type-names new-type))
-		   (if (equal? old-type new-type)
-		       (set-car! fields
-				 (append (list new-type)
-					 (cdr (car fields))
-					 (list (list x))
-					 )
-				 )
-		       (if (equal? old-type #f)
-			   (set! fields (list (list new-type (list x))))
-			   (set! fields (append (list (list new-type (list x))) fields))
-			   )
-		       )
-		   (set! old-type new-type)
-		   )
-		 names)
-		fields)
-	      )
-	    )
-
-	   (make-struct-body
-	    (lambda (type)
-	      (let* ((name   (assoc-ref type "name"))
-		     (data   (assoc-ref type "fields"))
-		     (output (string))
-		     )
-		(for-each
-		 (lambda (y)
-		   (for-each
-		    (lambda (z)
-		      (set! output (string-append output z))
-		      )
-		    y)
-		   )
-		 (map
-		  (lambda (x) (make-field-list name (car x) (cdr x)))
-		  data)
-		 )
-		output)
-	      )
-	    )
-	   
-	   (make-struct
-	    (lambda (type)
-	      (let* ((name   (assoc-ref type "name"))
-		     (data   (assoc-ref type "fields"))
-		     (output (string-append
-			      (tab-pad-string
-			       (string "typedef struct _glibtop_" name)
-			       5)
-			      (string "glibtop_" name ";\n\n"
-				      "struct _glibtop_" name "\n{\n\t"
-				      "u_int64_t\tflags;\n")
-			      )
-			     )
-		     )
-		(string-append output (make-struct-body type) "};\n")
-		)
-	      )
-	    )
-
-	   (make-param-description
-	    (lambda ()
-	      (let* ((label-list labels)
-		     (description-list descriptions)
-		     (output (string))
-		     )
-		(for-each
-		 (lambda (name)
-		   (let* ((label (car label-list))
-			  (description (car description-list))
-			  )
-		     (set! label-list (cdr label-list))
-		     (set! description-list (cdr description-list))
-		     (set! output
-			   (string-append output 
-					  (string "<varlistentry>\n"
-						  "<term><parameter>"
-						  name
-						  "</parameter></term>\n\n"
-						  "<listitem>\n<para>\n"
-						  description "\n\n")
-					  )
-			   )
-		     )
-		   )
-		 names)
-		output)
-	      )
-	    )
-	   
-	   )
-      
-      (set! decl-list (assoc-set! decl-list "name" name))
-      (set! decl-list (assoc-set! decl-list "label" label))
-      (set! decl-list (assoc-set! decl-list "fields" (init-field-list)))
-
-      (string-append section-string
-		     description-string
-		     synopsis-start-string
-		     (string "<blockquote>\n<funcsynopsis>\n")
-		     funcsynopsisinfo-string
-		     funcdef-noserver-string
-		     paramdef-noserver-string
-		     (string "</funcsynopsis>\n")
-		     (string "<funcsynopsis>\n")
-		     funcdef-string
-		     (paramdef-string)
-		     (string "</funcsynopsis>\n</blockquote>\n")
-		     definition-start-string
-		     (string "<blockquote>\n<literallayout>\n")
-		     (make-struct decl-list)
-		     (string "</literallayout>\n</blockquote>\n")
-		     param-description-start-string
-		     "<variablelist>\n\n"
-		     (make-param-description)
-		     "</variablelist>\n\n"
-		     "&include-" feature_nounder ".sgml;\n\n"
-		     )
-      )
-    )
-  )
-
-;; <sect2 id="glibtop-get-cpu">
-;; <title><function>glibtop_get_cpu()</function> - get CPU usage</title>
-;; 
-;; <funcsynopsis>
-;; <funcsynopsisinfo>
-;; #include &lt;glibtop.h>
-;; #include &lt;glibtop/cpu.h></funcsynopsisinfo>
-;; <funcdef>void <function>glibtop_get_cpu</function></funcdef>
-;; <paramdef>glibtop *<parameter>server</parameter>, glibtop_cpu *<parameter>cpu_usage</parameter>
-;; </paramdef></funcsynopsis>
-
-
-
-(begin
-  (make-sysdeps-list)
-  
-  (for-each (lambda (x)
-	      (display (make-function-reference x))
-	      )
-	    (cdr (glibtop-names-sysdeps)))
-  )
--- a/guile/make-header.scm
+++ b/guile/make-header.scm
@@ -1,195 +0,0 @@
-(define cpu-type '(("name" . "cpu")
-		   ("label" . "CPU Usage")
-		   ("fields" . (("unsigned long" ("total" "Total CPU Usage")
-						 ("user") ("nice") ("sys") ("idle"))
-				("const char" ("name"))
-				)
-			     )
-		   )
-  )
-
-;; computes constant for struct field (eg. GLIBTOP_CPU_TOTAL)
-
-(define field-name-constant
-  (lambda (name field)
-    (string "GLIBTOP_"
-	    (string-upcase! (string name))
-	    "_"
-	    (string-upcase! (string field)))
-    )
-  )
-
-;; computes structure name (eg. glibtop_cpu)
-
-(define make-struct-name
-  (lambda (type)
-    (string "glibtop_" (assoc-ref type "name"))
-    )
-  )
-
-(define tab-pad-string
-  (lambda (string tabs)
-    (string-append string (make-string (- (* tabs 8) (string-length string)) #\space))
-    )
-  )
-
-(define make-field-list
-  (lambda (name type fields)
-    (let* ((output (string)) (pos 1))
-      (map
-       (lambda (x)
-	 (let* ((sep   (if (= pos (length fields)) ";" ","))
-		(start (if (= pos 1)
-			   (string "\t"
-				   (tab-pad-string (string type) 2))
-			   (string "\t\t"))
-		       )
-		(comment (string (if (= pos 1) "" "\t") "/* "
-				 (tab-pad-string (field-name-constant name (car x)) 3)
-				 " */"))
-		(field (tab-pad-string (string-append (string (car x)) sep) 2))
-		)
-	   (set! pos (+ pos 1))
-	   (string-append start field comment "\n")
-	   )
-	 )
-       fields)
-      )
-    )
-  )
-
-(define make-struct-body
-  (lambda (type)
-    (let* ((name   (assoc-ref type "name"))
-	   (data   (assoc-ref type "fields"))
-	   (output (string))
-	   )
-      (for-each
-       (lambda (y)
-	 (for-each
-	  (lambda (z)
-	    (set! output (string-append output z))
-	    )
-	  y)
-	 )
-       (map
-	(lambda (x) (make-field-list name (car x) (cdr x)))
-	data)
-       )
-      output)
-    )
-  )
-
-(define make-struct
-  (lambda (type)
-    (let* ((name   (assoc-ref type "name"))
-	   (data   (assoc-ref type "fields"))
-	   (output (string-append
-		    (tab-pad-string
-		     (string "typedef struct _glibtop_" name)
-		     5)
-		    (string "glibtop_" name ";\n\n"
-			    "struct glibtop_" name "\n{\n\t"
-			    "unsigned long\tflags;\n")
-		    )
-		   )
-	   )
-      (string-append output (make-struct-body type) "};\n")
-      )
-    )
-  )
-
-(define make-field-name-list
-  (lambda (type)
-    (let* ((name   (assoc-ref type "name"))
-	   (data   (assoc-ref type "fields"))
-	   (return (list))
-	   )
-      (map
-       (lambda (x)
-	 (map
-	  (lambda (y) (set! return (append return (list (car y)))))
-	  (cdr x)
-	  )
-	 )
-       data)
-      return)
-    )
-  )
-
-(define make-field-constants
-  (lambda (type)
-    (let* ((name   (assoc-ref type "name"))
-	   (data   (make-field-name-list type))
-	   (output (string
-		    (tab-pad-string
-		     (string "#define GLIBTOP_MAX_"
-			     (string-upcase! (string name))
-			     ) 5)
-		    (number->string (length data))
-		    "\n\n"
-		    )
-		   )
-	   (pos 0)
-	   )
-      (for-each
-       (lambda (x)
-	 (set! output (string-append output (string
-					     (tab-pad-string
-					      (string "#define GLIBTOP_"
-						      (string-upcase! (string name))
-						      "_"
-						      (string-upcase! (string x))
-						      ) 5)
-					     (number->string pos)
-					     "\n"
-					     )
-				     )
-	       )
-	 (set! pos (+ pos 1))
-	 )
-       data)
-      output)
-    )
-  )
-
-(define make-extern-defs
-  (lambda (type)
-    (let* ((name   (assoc-ref type "name"))
-	   )
-      (string
-       (tab-pad-string (string "extern void glibtop_get_" name) 6)
-       "__P(glibtop *, glibtop_" name " *);\n\n"
-       "#ifdef HAVE_GUILE\n\n"
-       "/* You need to link with -lgtop_guile to get this stuff here. */\n\n"
-       (tab-pad-string (string "extern SCM glibtop_get_" name) 6)
-       "__P(void);\n\n"
-       "#endif /* HAVE_GUILE */\n\n"
-       "#ifdef GLIBTOP_GUILE_NAMES\n\n"
-       "/* You need to link with -lgtop_guile_names to get this stuff here. */\n\n"
-       (tab-pad-string (string "extern SCM glibtop_guile_names_" name) 6)
-       "__P(void);\n"
-       (tab-pad-string (string "extern SCM glibtop_guile_labels_" name) 6)
-       "__P(void);\n"
-       (tab-pad-string (string "extern SCM glibtop_guile_descriptions_" name) 6)
-       "__P(void);\n\n"
-       "#endif /* GLIBTOP_GUILE_NAMES */\n\n"
-       "#ifdef GLIBTOP_NAMES\n\n"
-       "/* You need to link with -lgtop_names to get this stuff here. */\n\n"
-       (tab-pad-string (string "extern const char *glibtop_names_" name) 6)
-       "[];\n"
-       (tab-pad-string (string "extern const char *glibtop_labels_" name) 6)
-       "[];\n"
-       (tab-pad-string (string "extern const char *glibtop_descriptions_" name) 6)
-       "[];\n\n"
-       "#endif /* GLIBTOP_NAMES */\n\n")
-      )
-    )
-  )
-
-(begin
-  (display (make-field-constants cpu-type)) (newline)
-  (display (make-struct cpu-type)) (newline)
-  (display (make-extern-defs cpu-type)) (newline)
-  )
-
--- a/guile/reference.sgml
+++ b/guile/reference.sgml
--- a/include/glibtop/Makefile.am
+++ b/include/glibtop/Makefile.am
@@ -7,4 +7,4 @@ glibtop_HEADERS		= close.h loadavg.h prockernel.h procstate.h \
 			  procsegment.h read.h sysdeps.h xmalloc.h global.h \
 			  procsignal.h read_data.h union.h types.h gnuserv.h \
 			  parameter.h mountlist.h fsusage.h procmap.h signal.h \
-			  inodedb.h
+			  inodedb.h sysinfo.h ppp.h procargs.h netload.h
--- a/include/glibtop/close.h
+++ b/include/glibtop/close.h
@@ -1,36 +1,38 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_CLOSE_H__
 #define __GLIBTOP_CLOSE_H__

 #include <glibtop.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

-extern void glibtop_close_r __P((glibtop *));
+void glibtop_close_r (glibtop *server);

-extern void glibtop_close_s __P((glibtop *));
-extern void glibtop_close_p __P((glibtop *));
+void glibtop_close_s (glibtop *server);
+void glibtop_close_p (glibtop *server);

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/command.h
+++ b/include/glibtop/command.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_COMMAND_H__
 #define __GLIBTOP_COMMAND_H__
@@ -26,7 +28,7 @@
 #include <glibtop/sysdeps.h>
 #include <glibtop/union.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_CMND_QUIT		0
 #define GLIBTOP_CMND_SYSDEPS		1
@@ -48,12 +50,15 @@ __BEGIN_DECLS
 #define GLIBTOP_CMND_PROC_SIGNAL	15
 #define GLIBTOP_CMND_PROC_KERNEL	16
 #define GLIBTOP_CMND_PROC_SEGMENT	17
-#define GLIBTOP_CMND_PROC_MAP		18
+#define GLIBTOP_CMND_PROC_ARGS		18
+#define GLIBTOP_CMND_PROC_MAP		19

-#define GLIBTOP_CMND_MOUNTLIST		19
-#define GLIBTOP_CMND_FSUSAGE		20
+#define GLIBTOP_CMND_MOUNTLIST		20
+#define GLIBTOP_CMND_FSUSAGE		21
+#define GLIBTOP_CMND_NETLOAD		22
+#define GLIBTOP_CMND_PPP		23

-#define GLIBTOP_MAX_CMND		21
+#define GLIBTOP_MAX_CMND		24

 #define _GLIBTOP_PARAM_SIZE		16

@@ -84,9 +89,14 @@ struct _glibtop_response

 #define glibtop_call(p1, p2, p3, p4)	glibtop_call_r(glibtop_global_server, p1, p2, p3, p4)

-extern void *glibtop_call_l __P((glibtop *, unsigned, size_t, void *, size_t, void *));
-extern void *glibtop_call_s __P((glibtop *, unsigned, size_t, void *, size_t, void *));
+void *
+glibtop_call_l (glibtop *server, unsigned command, size_t send_size,
+		const void *send_buf, size_t recv_size, void *recv_buf);

-__END_DECLS
+void *
+glibtop_call_s (glibtop *server, unsigned command, size_t send_size,
+		const void *send_buf, size_t recv_size, void *recv_buf);
+
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/cpu.h
+++ b/include/glibtop/cpu.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_CPU_H__
 #define __GLIBTOP_CPU_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_CPU_TOTAL	0
 #define GLIBTOP_CPU_USER	1
@@ -34,19 +36,33 @@ __BEGIN_DECLS
 #define GLIBTOP_CPU_IDLE	4
 #define GLIBTOP_CPU_FREQUENCY	5

-#define GLIBTOP_MAX_CPU		6
+#define GLIBTOP_XCPU_TOTAL	6
+#define GLIBTOP_XCPU_USER	7
+#define GLIBTOP_XCPU_NICE	8
+#define GLIBTOP_XCPU_SYS	9
+#define GLIBTOP_XCPU_IDLE	10
+
+#define GLIBTOP_MAX_CPU		11
+
+/* Nobody should really be using more than 4 processors. */
+#define GLIBTOP_NCPU		4

 typedef struct _glibtop_cpu	glibtop_cpu;

 struct _glibtop_cpu
 {
 	u_int64_t	flags,
-		total,		/* GLIBTOP_CPU_TOTAL		*/
-		user,		/* GLIBTOP_CPU_USER		*/
-		nice,		/* GLIBTOP_CPU_NICE		*/
-		sys,		/* GLIBTOP_CPU_SYS		*/
-		idle,		/* GLIBTOP_CPU_IDLE		*/
-		frequency;	/* GLIBTOP_CPU_FREQUENCY	*/
+		total,				/* GLIBTOP_CPU_TOTAL		*/
+		user,				/* GLIBTOP_CPU_USER		*/
+		nice,				/* GLIBTOP_CPU_NICE		*/
+		sys,				/* GLIBTOP_CPU_SYS		*/
+		idle,				/* GLIBTOP_CPU_IDLE		*/
+		frequency,			/* GLIBTOP_CPU_FREQUENCY	*/
+		xcpu_total [GLIBTOP_NCPU],	/* GLIBTOP_XCPU_TOTAL		*/
+		xcpu_user [GLIBTOP_NCPU],	/* GLIBTOP_XCPU_USER		*/
+		xcpu_nice [GLIBTOP_NCPU],	/* GLIBTOP_XCPU_NICE		*/
+		xcpu_sys  [GLIBTOP_NCPU],	/* GLIBTOP_XCPU_SYS		*/
+		xcpu_idle [GLIBTOP_NCPU];	/* GLIBTOP_XCPU_IDLE		*/
 };

 #define glibtop_get_cpu(cpu)	glibtop_get_cpu_l(glibtop_global_server, cpu)
@@ -57,33 +73,14 @@ struct _glibtop_cpu
 #define glibtop_get_cpu_r	glibtop_get_cpu_s
 #endif

-extern void glibtop_get_cpu_l __P((glibtop *, glibtop_cpu *));
+void glibtop_get_cpu_l (glibtop *server, glibtop_cpu *buf);

 #if GLIBTOP_SUID_CPU
-extern void glibtop_init_cpu_p __P((glibtop *));
-extern void glibtop_get_cpu_p __P((glibtop *, glibtop_cpu *));
+void glibtop_init_cpu_p (glibtop *server);
+void glibtop_get_cpu_p (glibtop *server, glibtop_cpu *buf);
 #else
-extern void glibtop_init_cpu_s __P((glibtop *));
-extern void glibtop_get_cpu_s __P((glibtop *, glibtop_cpu *));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_cpu __P((void));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_cpu __P((void));
-extern SCM glibtop_guile_types_cpu __P((void));
-extern SCM glibtop_guile_labels_cpu __P((void));
-extern SCM glibtop_guile_descriptions_cpu __P((void));
-
+void glibtop_init_cpu_s (glibtop *server);
+void glibtop_get_cpu_s (glibtop *server, glibtop_cpu *buf);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -97,6 +94,6 @@ extern const char *glibtop_descriptions_cpu [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/error.h
+++ b/include/glibtop/error.h
@@ -1,30 +1,89 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_ERROR_H__
 #define __GLIBTOP_ERROR_H__

 #include <glibtop.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS
+
+#ifndef G_GNUC_UNUSED
+#if	__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ > 4)
+#define G_GNUC_UNUSED				\
+  __attribute__((unused))
+#else	/* !__GNUC__ */
+#define	G_GNUC_UNUSED
+#endif	/* !__GNUC__ */
+#endif /* defined G_GNUC_UNUSED */
+
+void glibtop_error_vr (glibtop *server, char *format, va_list args);
+void glibtop_warn_vr (glibtop *server, char *format, va_list args);
+
+void glibtop_error_io_vr (glibtop *server, char *format, int, va_list args);
+void glibtop_warn_io_vr (glibtop *server, char *format, int, va_list args);
+
+static void G_GNUC_UNUSED
+glibtop_error_r (glibtop *server, char *format, ...)
+{
+	va_list args;
+
+	va_start (args, format);
+	glibtop_error_vr (server, format, args);
+	va_end (args);
+}
+
+static void G_GNUC_UNUSED
+glibtop_warn_r (glibtop *server, char *format, ...)
+{
+	va_list args;
+
+	va_start (args, format);
+	glibtop_warn_vr (server, format, args);
+	va_end (args);
+}
+
+static void G_GNUC_UNUSED
+glibtop_error_io_r (glibtop *server, char *format, ...)
+{
+	va_list args;
+
+	va_start (args, format);
+	glibtop_error_io_vr (server, format, errno, args);
+	va_end (args);
+}
+
+static void G_GNUC_UNUSED
+glibtop_warn_io_r (glibtop *server, char *format, ...)
+{
+	va_list args;
+
+	va_start (args, format);
+	glibtop_warn_io_vr (server, format, errno, args);
+	va_end (args);
+}
+
+#ifdef  __GNUC__

 #define glibtop_error(p1, args...)	glibtop_error_r(glibtop_global_server , p1 , ## args)
 #define glibtop_warn(p1, args...)	glibtop_warn_r(glibtop_global_server , p1 , ## args)
@@ -32,12 +91,46 @@ __BEGIN_DECLS
 #define glibtop_error_io(p1, args...)	glibtop_error_io_r(glibtop_global_server , p1 , ## args)
 #define glibtop_warn_io(p1, args...)	glibtop_warn_io_r(glibtop_global_server , p1 , ## args)

-extern void glibtop_error_r __P((glibtop *, char *, ...));
-extern void glibtop_warn_r __P((glibtop *, char *, ...));
+#else /* no __GNUC__ */

-extern void glibtop_error_io_r __P((glibtop *, char *, ...));
-extern void glibtop_warn_io_r __P((glibtop *, char *, ...));
+static void
+glibtop_error (char *format, ...)
+{
+	va_list args;
+	va_start (args, format);
+	glibtop_error_vr (glibtop_global_server, format, args);
+	va_end (args);
+}

-__END_DECLS
+static void
+glibtop_warn (char *format, ...)
+{
+	va_list args;
+	va_start (args, format);
+	glibtop_warn_vr (glibtop_global_server, format, args);
+	va_end (args);
+}
+
+static void
+glibtop_error_io (char *format, ...)
+{
+	va_list args;
+	va_start (args, format);
+	glibtop_error_io_vr (glibtop_global_server, format, errno, args);
+	va_end (args);
+}
+
+static void
+glibtop_warn_io (char *format, ...)
+{
+	va_list args;
+	va_start (args, format);
+	glibtop_warn_io_vr (glibtop_global_server, format, errno, args);
+	va_end (args);
+}
+
+#endif /* no __GNUC__ */
+
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/fsusage.h
+++ b/include/glibtop/fsusage.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_FSUSAGE_H__
 #define __GLIBTOP_FSUSAGE_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_FSUSAGE_BLOCKS		0
 #define GLIBTOP_FSUSAGE_BFREE		1
@@ -51,28 +53,8 @@ struct _glibtop_fsusage

 #define glibtop_get_fsusage_r		glibtop_get_fsusage_s

-extern void glibtop_get_fsusage_l __P((glibtop *, glibtop_fsusage *, const char *));
-
-extern void glibtop_get_fsusage_s __P((glibtop *, glibtop_fsusage *, const char *));
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_fsusage __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_fsusage __P((void));
-extern SCM glibtop_guile_types_fsusage __P((void));
-extern SCM glibtop_guile_labels_fsusage __P((void));
-extern SCM glibtop_guile_descriptions_fsusage __P((void));
-
-#endif
+void glibtop_get_fsusage_l (glibtop *server, glibtop_fsusage *buf, const char *mount_dir);
+void glibtop_get_fsusage_s (glibtop *server, glibtop_fsusage *buf, const char *mount_dir);

 #ifdef GLIBTOP_NAMES

@@ -85,6 +67,6 @@ extern const char *glibtop_descriptions_fsusage [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/global.h
+++ b/include/glibtop/global.h
@@ -1,55 +1,67 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_GLOBAL_H__
 #define __GLIBTOP_GLOBAL_H__

+#ifdef _IN_LIBGTOP
 #include <config.h>
+#endif

-/* __BEGIN_DECLS should be used at the beginning of your declarations,
-   so that C++ compilers don't mangle their names.  Use __END_DECLS at
-   the end of C declarations. */
+/*
+ * All declarations are enclosed in BEGIN_LIBGTOP_DECLS and
+ * END_LIBGTOP_DECLS so that C++ compilers don't mangle their names.
+ *
+ */
   
-#undef __BEGIN_DECLS
-#undef __END_DECLS
+#undef BEGIN_LIBGTOP_DECLS
+#undef END_LIBGTOP_DECLS
 #ifdef __cplusplus
-# define __BEGIN_DECLS extern "C" {
-# define __END_DECLS }
+# define BEGIN_LIBGTOP_DECLS extern "C" {
+# define END_LIBGTOP_DECLS }
 #else
-# define __BEGIN_DECLS /* empty */
-# define __END_DECLS /* empty */
+# define BEGIN_LIBGTOP_DECLS /* empty */
+# define END_LIBGTOP_DECLS /* empty */
 #endif

-/* __P is a macro used to wrap function prototypes, so that compilers
-   that don't understand ANSI C prototypes still work, and ANSI C
-   compilers can issue warnings about type mismatches. */
+#ifdef _IN_LIBGTOP

-#undef __P
-#if defined (__STDC__) || defined (_AIX) \
-|| (defined (__mips) && defined (_SYSTYPE_SVR4)) \
-     || defined(WIN32) || defined(__cplusplus)
-# define __P(protos) protos
-#else
-# define __P(protos) ()
-#endif
+/* Provide macros to feature the GCC function attribute.
+ */
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ > 4)
+#define G_GNUC_NORETURN				\
+  __attribute__((noreturn))
+#define G_GNUC_CONST				\
+  __attribute__((const))
+#define G_GNUC_UNUSED				\
+  __attribute__((unused))
+#else	/* !__GNUC__ */
+#define G_GNUC_NORETURN
+#define G_GNUC_CONST
+#define	G_GNUC_UNUSED
+#endif	/* !__GNUC__ */
+
+#endif /* _IN_LIBGTOP */

 #if TIME_WITH_SYS_TIME
 # include <sys/time.h>
@@ -62,6 +74,10 @@
 # endif
 #endif

+#ifdef NEED_GNOMESUPPORT_H
+#include <gnomesupport.h>
+#endif
+
 #ifdef WITHOUT_GUILE
 #undef GLIBTOP_GUILE
 #undef GLIBTOP_GUILE_NAMES
@@ -93,24 +109,34 @@
 #endif

 #include <string.h>
+
+#ifdef _IN_LIBGTOP
+
 #include <sys/types.h>
 #include <sys/param.h>
 #include <sys/socket.h>
 #include <sys/stat.h>
+
+#endif /* _IN_LIBGTOP */
+
 #include <signal.h>
 #include <errno.h>

-__BEGIN_DECLS
+#ifdef _IN_LIBGTOP
+
+BEGIN_LIBGTOP_DECLS

 #ifndef _
-#define _(String) gettext (String)
+#define _(String) dgettext (PACKAGE, String)
 #define N_(String) (String)
 #endif

 #ifndef HAVE_STRERROR
-extern char *strerror __P((int));
+char *strerror (int errno);
 #endif

-__END_DECLS
+END_LIBGTOP_DECLS
+
+#endif /* _IN_LIBGTOP */

 #endif
--- a/include/glibtop/gnuserv.h
+++ b/include/glibtop/gnuserv.h
@@ -75,7 +75,9 @@ static char header_rcsid [] = "!Header: gnuserv.h,v 2.4 95/02/16 11:58:11 arup a
 * stuff related to supporting MIT-MAGIC-COOKIE-1
 */

-#define MCOOKIE_SCREEN "42980"   /* screen # to use as the gnuserv cookie */
+#if 0
+#define MCOOKIE_SCREEN "42980"   /* screen # to use as the gnuserv cookie */ 
+#endif
 #define MCOOKIE_NAME   "MAGIC-1" /* authentication protocol name */
 #define MCOOKIE_X_NAME "MIT-MAGIC-COOKIE-1"  /* as needed by X */

@@ -151,8 +153,9 @@ static char header_rcsid [] = "!Header: gnuserv.h,v 2.4 95/02/16 11:58:11 arup a
 #define CONN_IPC      2

 /* function declarations */
-extern int glibtop_make_connection __P((const char *, int, int *));
+int glibtop_make_connection (const char *hostarg, int portarg, int *s);

 #ifdef INTERNET_DOMAIN_SOCKETS
-extern long glibtop_internet_addr __P((const char *));
+long glibtop_internet_addr (const char *host);
 #endif
+
--- a/include/glibtop/inodedb.h
+++ b/include/glibtop/inodedb.h
@@ -1,21 +1,23 @@
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_INODEDB_H__
 #define __GLIBTOP_INODEDB_H__
@@ -29,7 +31,7 @@

 #define GLIBTOP_INODEDB_ALL		7

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 typedef struct _glibtop_inodedb		glibtop_inodedb;

@@ -49,10 +51,17 @@ struct _glibtop_inodedb
 #define glibtop_inodedb_lookup(p1,p2,p3) glibtop_inodedb_lookup_s(glibtop_global_server, p1, p2, p3)
 #define glibtop_inodedb_close(p1)	glibtop_inodedb_close_s(glibtop_global_server)

-extern glibtop_inodedb *glibtop_inodedb_open_s __P((glibtop *, unsigned, unsigned long));
-extern const char *glibtop_inodedb_lookup_s __P((glibtop *, glibtop_inodedb *, u_int64_t, u_int64_t));
-extern void glibtop_inodedb_close_s __P((glibtop *, glibtop_inodedb *));
+glibtop_inodedb *
+glibtop_inodedb_open_s (glibtop *server, unsigned databases, unsigned long cache_size);

-__END_DECLS
+const char *
+glibtop_inodedb_lookup_s (glibtop *server,
+			  glibtop_inodedb *inodedb,
+			  u_int64_t device, u_int64_t inode);
+
+void
+glibtop_inodedb_close_s (glibtop *server, glibtop_inodedb *inodedb);
+
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/loadavg.h
+++ b/include/glibtop/loadavg.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_LOADAVG_H__
 #define __GLIBTOP_LOADAVG_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_LOADAVG_LOADAVG		0
 #define GLIBTOP_LOADAVG_NR_RUNNING	1
@@ -53,33 +55,14 @@ struct _glibtop_loadavg
 #define glibtop_get_loadavg_r		glibtop_get_loadavg_s
 #endif

-extern void glibtop_get_loadavg_l __P((glibtop *, glibtop_loadavg *));
+void glibtop_get_loadavg_l (glibtop *server, glibtop_loadavg *buf);

 #if GLIBTOP_SUID_LOADAVG
-extern void glibtop_init_loadavg_p __P((glibtop *));
-extern void glibtop_get_loadavg_p __P((glibtop *, glibtop_loadavg *));
+void glibtop_init_loadavg_p (glibtop *server);
+void glibtop_get_loadavg_p (glibtop *server, glibtop_loadavg *buf);
 #else
-extern void glibtop_init_loadavg_s __P((glibtop *));
-extern void glibtop_get_loadavg_s __P((glibtop *, glibtop_loadavg *));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_loadavg __P((void));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_loadavg __P((void));
-extern SCM glibtop_guile_types_loadavg __P((void));
-extern SCM glibtop_guile_labels_loadavg __P((void));
-extern SCM glibtop_guile_descriptions_loadavg __P((void));
-
+void glibtop_init_loadavg_s (glibtop *server);
+void glibtop_get_loadavg_s (glibtop *server, glibtop_loadavg *buf);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -93,6 +76,6 @@ extern const char *glibtop_descriptions_loadavg [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/mem.h
+++ b/include/glibtop/mem.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_MEM_H__
 #define __GLIBTOP_MEM_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_MEM_TOTAL	0
 #define GLIBTOP_MEM_USED	1
@@ -61,33 +63,14 @@ struct _glibtop_mem
 #define glibtop_get_mem_r		glibtop_get_mem_s
 #endif

-extern void glibtop_get_mem_l __P((glibtop *, glibtop_mem *));
+void glibtop_get_mem_l (glibtop *server, glibtop_mem *buf);

 #if GLIBTOP_SUID_MEM
-extern void glibtop_init_mem_p __P((glibtop *));
-extern void glibtop_get_mem_p __P((glibtop *, glibtop_mem *));
+void glibtop_init_mem_p (glibtop *server);
+void glibtop_get_mem_p (glibtop *server, glibtop_mem *buf);
 #else
-extern void glibtop_init_mem_s __P((glibtop *));
-extern void glibtop_get_mem_s __P((glibtop *, glibtop_mem *));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_mem __P((void));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_mem __P((void));
-extern SCM glibtop_guile_types_mem __P((void));
-extern SCM glibtop_guile_labels_mem __P((void));
-extern SCM glibtop_guile_descriptions_mem __P((void));
-
+void glibtop_init_mem_s (glibtop *server);
+void glibtop_get_mem_s (glibtop *server, glibtop_mem *buf);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -101,6 +84,6 @@ extern const char *glibtop_descriptions_mem [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/mountlist.h
+++ b/include/glibtop/mountlist.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_MOUNTLIST_H__
 #define __GLIBTOP_MOUNTLIST_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_MOUNTLIST_NUMBER	0
 #define GLIBTOP_MOUNTLIST_TOTAL		1
@@ -57,28 +59,11 @@ struct _glibtop_mountlist

 #define glibtop_get_mountlist_r		glibtop_get_mountlist_s

-extern glibtop_mountentry *glibtop_get_mountlist_l __P((glibtop *, glibtop_mountlist *, int));
+glibtop_mountentry *
+glibtop_get_mountlist_l (glibtop *server, glibtop_mountlist *buf, int all_fs);

-extern glibtop_mountentry *glibtop_get_mountlist_s __P((glibtop *, glibtop_mountlist *, int));
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_mountlist __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_mountlist __P((void));
-extern SCM glibtop_guile_types_mountlist __P((void));
-extern SCM glibtop_guile_labels_mountlist __P((void));
-extern SCM glibtop_guile_descriptions_mountlist __P((void));
-
-#endif
+glibtop_mountentry *
+glibtop_get_mountlist_s (glibtop *server, glibtop_mountlist *buf, int all_fs);

 #ifdef GLIBTOP_NAMES

@@ -91,6 +76,6 @@ extern const char *glibtop_descriptions_mountlist [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/msg_limits.h
+++ b/include/glibtop/msg_limits.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_MSG_LIMITS_H__
 #define __GLIBTOP_MSG_LIMITS_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_IPC_MSGPOOL	0
 #define GLIBTOP_IPC_MSGMAP	1
@@ -59,33 +61,14 @@ struct _glibtop_msg_limits
 #define glibtop_get_msg_limits_r	glibtop_get_msg_limits_s
 #endif

-extern void glibtop_get_msg_limits_l __P((glibtop *, glibtop_msg_limits *));
+void glibtop_get_msg_limits_l (glibtop *server, glibtop_msg_limits *buf);

 #if GLIBTOP_SUID_MSG_LIMITS
-extern void glibtop_init_msg_limits_p __P((glibtop *));
-extern void glibtop_get_msg_limits_p __P((glibtop *, glibtop_msg_limits *));
+void glibtop_init_msg_limits_p (glibtop *server);
+void glibtop_get_msg_limits_p (glibtop *server, glibtop_msg_limits *buf);
 #else
-extern void glibtop_init_msg_limits_s __P((glibtop *));
-extern void glibtop_get_msg_limits_s __P((glibtop *, glibtop_msg_limits *));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_msg_limits __P((void));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_msg_limits __P((void));
-extern SCM glibtop_guile_types_msg_limits __P((void));
-extern SCM glibtop_guile_labels_msg_limits __P((void));
-extern SCM glibtop_guile_descriptions_msg_limits __P((void));
-
+void glibtop_init_msg_limits_s (glibtop *server);
+void glibtop_get_msg_limits_s (glibtop *server, glibtop_msg_limits *buf);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -99,6 +82,7 @@ extern const char *glibtop_descriptions_msg_limits [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
+
--- a/include/glibtop/netload.h
+++ b/include/glibtop/netload.h
@@ -0,0 +1,120 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#ifndef __GLIBTOP_NETLOAD_H__
+#define __GLIBTOP_NETLOAD_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+BEGIN_LIBGTOP_DECLS
+
+#define GLIBTOP_NETLOAD_IF_FLAGS	0
+#define GLIBTOP_NETLOAD_MTU		1
+#define GLIBTOP_NETLOAD_SUBNET		2
+#define GLIBTOP_NETLOAD_ADDRESS		3
+#define GLIBTOP_NETLOAD_PACKETS_IN	4
+#define GLIBTOP_NETLOAD_PACKETS_OUT	5
+#define GLIBTOP_NETLOAD_PACKETS_TOTAL	6
+#define GLIBTOP_NETLOAD_BYTES_IN	7
+#define GLIBTOP_NETLOAD_BYTES_OUT	8
+#define GLIBTOP_NETLOAD_BYTES_TOTAL	9
+#define GLIBTOP_NETLOAD_ERRORS_IN	10
+#define GLIBTOP_NETLOAD_ERRORS_OUT	11
+#define GLIBTOP_NETLOAD_ERRORS_TOTAL	12
+#define GLIBTOP_NETLOAD_COLLISIONS	13
+
+#define GLIBTOP_MAX_NETLOAD		14
+
+typedef struct _glibtop_netload	glibtop_netload;
+
+enum {
+	GLIBTOP_IF_FLAGS_UP = 1,
+	GLIBTOP_IF_FLAGS_BROADCAST,
+	GLIBTOP_IF_FLAGS_DEBUG,
+	GLIBTOP_IF_FLAGS_LOOPBACK,
+	GLIBTOP_IF_FLAGS_POINTOPOINT,
+	GLIBTOP_IF_FLAGS_RUNNING,
+	GLIBTOP_IF_FLAGS_NOARP,
+	GLIBTOP_IF_FLAGS_PROMISC,
+	GLIBTOP_IF_FLAGS_ALLMULTI,
+	GLIBTOP_IF_FLAGS_OACTIVE,
+	GLIBTOP_IF_FLAGS_SIMPLEX,
+	GLIBTOP_IF_FLAGS_LINK0,
+	GLIBTOP_IF_FLAGS_LINK1,
+	GLIBTOP_IF_FLAGS_LINK2,
+	GLIBTOP_IF_FLAGS_ALTPHYS,
+	GLIBTOP_IF_FLAGS_MULTICAST
+};
+
+struct _glibtop_netload
+{
+	u_int64_t	flags,
+		if_flags,		/* GLIBTOP_NETLOAD_IF_FLAGS	*/
+		mtu,			/* GLIBTOP_NETLOAD_MTU		*/
+		subnet,			/* GLIBTOP_NETLOAD_SUBNET	*/
+		address,		/* GLIBTOP_NETLOAD_ADDRESS	*/
+		packets_in,		/* GLIBTOP_NETLOAD_PACKETS_IN	*/
+		packets_out,		/* GLIBTOP_NETLOAD_PACKETS_OUT	*/
+		packets_total,		/* GLIBTOP_NETLOAD_PACKETS_TOTAL*/
+		bytes_in,		/* GLIBTOP_NETLOAD_BYTES_IN	*/
+		bytes_out,		/* GLIBTOP_NETLOAD_BYTES_OUT	*/
+		bytes_total,		/* GLIBTOP_NETLOAD_BYTES_TOTAL	*/
+		errors_in,		/* GLIBTOP_NETLOAD_ERRORS_IN	*/
+		errors_out,		/* GLIBTOP_NETLOAD_ERRORS_OUT	*/
+		errors_total,		/* GLIBTOP_NETLOAD_ERRORS_TOTAL	*/
+		collisions;		/* GLIBTOP_NETLOAD_COLLISIONS	*/
+};
+
+#define glibtop_get_netload(netload,interface)	glibtop_get_netload_l(glibtop_global_server, netload, interface)
+
+#if GLIBTOP_SUID_NETLOAD
+#define glibtop_get_netload_r	glibtop_get_netload_p
+#else
+#define glibtop_get_netload_r	glibtop_get_netload_s
+#endif
+
+void glibtop_get_netload_l (glibtop *server, glibtop_netload *buf, const char *interface);
+
+#if GLIBTOP_SUID_NETLOAD
+void glibtop_init_netload_p (glibtop *server);
+void glibtop_get_netload_p (glibtop *server, glibtop_netload *buf, const char *interface);
+#else
+void glibtop_init_netload_s (glibtop *server);
+void glibtop_get_netload_s (glibtop *server, glibtop_netload *buf, const char *interface);
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_netload [];
+extern const unsigned glibtop_types_netload [];
+extern const char *glibtop_labels_netload [];
+extern const char *glibtop_descriptions_netload [];
+
+#endif
+
+END_LIBGTOP_DECLS
+
+#endif
--- a/include/glibtop/open.h
+++ b/include/glibtop/open.h
@@ -1,21 +1,23 @@
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_OPEN_H__
 #define __GLIBTOP_OPEN_H__
@@ -24,7 +26,7 @@
 #include <glibtop/read.h>
 #include <glibtop/error.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define _GLIBTOP_INIT_STATE_INIT	0x10000
 #define _GLIBTOP_INIT_STATE_OPEN	0x20000
@@ -49,12 +51,23 @@ __BEGIN_DECLS

 #define GLIBTOP_ERROR_METHOD_DEFAULT	GLIBTOP_ERROR_METHOD_WARN_ONCE

-extern void glibtop_open_l __P((glibtop *, const char *, const unsigned long, const unsigned));
+void
+glibtop_open_l (glibtop *server, const char *program_name,
+		const unsigned long features, const unsigned flags);

-extern void glibtop_init_p __P((glibtop *, const unsigned long, const unsigned));
-extern void glibtop_open_p __P((glibtop *, const char *, const unsigned long, const unsigned));
-extern void glibtop_open_s __P((glibtop *, const char *, const unsigned long, const unsigned));
+void
+glibtop_init_p (glibtop *server, const unsigned long features,
+		const unsigned flags);

-__END_DECLS
+void
+glibtop_open_p (glibtop *server, const char *program_name,
+		const unsigned long features, const unsigned flags);
+
+void
+glibtop_open_s (glibtop *server, const char *program_name,
+		const unsigned long features, const unsigned flags);
+
+
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/parameter.h
+++ b/include/glibtop/parameter.h
@@ -1,21 +1,23 @@
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PARAMETER_H__
 #define __GLIBTOP_PARAMETER_H__
@@ -23,7 +25,7 @@
 #include <glibtop.h>
 #include <glibtop/open.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PARAM_METHOD		1
 #define GLIBTOP_PARAM_FEATURES		2
@@ -31,13 +33,19 @@ __BEGIN_DECLS
 #define GLIBTOP_PARAM_HOST		4
 #define GLIBTOP_PARAM_PORT		5
 #define GLIBTOP_PARAM_ERROR_METHOD	6
+#define GLIBTOP_PARAM_REQUIRED		7

 #define glibtop_get_parameter(p1,p2,p3)	glibtop_get_parameter_l(glibtop_global_server,p1,p2,p3)
 #define glibtop_set_parameter(p1,p2,p3) glibtop_set_parameter_l(glibtop_global_server,p1,p2,p3)

-extern size_t	glibtop_get_parameter_l __P((glibtop *, const unsigned, void *, size_t));
-extern void	glibtop_set_parameter_l __P((glibtop *, const unsigned, const void *, size_t));
+size_t
+glibtop_get_parameter_l (glibtop *server, const unsigned parameter,
+			 void *data_ptr, size_t data_size);

-__END_DECLS
+void
+glibtop_set_parameter_l (glibtop *server, const unsigned parameter,
+			 const void *data_ptr, size_t data_size);
+
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/ppp.h
+++ b/include/glibtop/ppp.h
@@ -0,0 +1,85 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#ifndef __GLIBTOP_PPP_H__
+#define __GLIBTOP_PPP_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+BEGIN_LIBGTOP_DECLS
+
+#define GLIBTOP_PPP_STATE	0
+#define GLIBTOP_PPP_BYTES_IN	1	
+#define GLIBTOP_PPP_BYTES_OUT	2
+
+#define GLIBTOP_MAX_PPP		3
+
+typedef struct _glibtop_ppp	glibtop_ppp;
+
+enum {
+	GLIBTOP_PPP_STATE_UNKNOWN = 0,
+	GLIBTOP_PPP_STATE_HANGUP,
+	GLIBTOP_PPP_STATE_ONLINE
+};
+
+struct _glibtop_ppp
+{
+	u_int64_t	flags,
+		state,			/* GLIBTOP_PPP_STATE		*/
+		bytes_in,		/* GLIBTOP_PPP_BYTES_IN		*/
+		bytes_out;		/* GLIBTOP_PPP_BYTES_OUT	*/
+};
+
+#define glibtop_get_ppp(ppp,device)	glibtop_get_ppp_l(glibtop_global_server, ppp, device)
+
+#if GLIBTOP_SUID_PPP
+#define glibtop_get_ppp_r	glibtop_get_ppp_p
+#else
+#define glibtop_get_ppp_r	glibtop_get_ppp_s
+#endif
+
+void glibtop_get_ppp_l (glibtop *server, glibtop_ppp *buf, unsigned short device);
+
+#if GLIBTOP_SUID_PPP
+void glibtop_init_ppp_p (glibtop *server);
+void glibtop_get_ppp_p (glibtop *server, glibtop_ppp *buf, unsigned short device);
+#else
+void glibtop_init_ppp_s (glibtop *server);
+void glibtop_get_ppp_s (glibtop *server, glibtop_ppp *buf, unsigned short device);
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_ppp [];
+extern const unsigned glibtop_types_ppp [];
+extern const char *glibtop_labels_ppp [];
+extern const char *glibtop_descriptions_ppp [];
+
+#endif
+
+END_LIBGTOP_DECLS
+
+#endif
--- a/include/glibtop/procargs.h
+++ b/include/glibtop/procargs.h
@@ -0,0 +1,83 @@
+/* $Id$ */
+
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.
+
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/
+
+#ifndef __GLIBTOP_PROC_ARGS_H__
+#define __GLIBTOP_PROC_ARGS_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+BEGIN_LIBGTOP_DECLS
+
+#define GLIBTOP_PROC_ARGS_SIZE		0
+
+#define GLIBTOP_MAX_PROC_ARGS		1
+
+typedef struct _glibtop_proc_args	glibtop_proc_args;
+
+struct _glibtop_proc_args
+{
+	u_int64_t	flags,
+		size;			/* GLIBTOP_PROC_ARGS_SIZE	*/
+};
+
+#define glibtop_get_proc_args(proc_args,pid,max_len) glibtop_get_proc_args_l(glibtop_global_server, proc_args, pid, max_len)
+
+#if GLIBTOP_SUID_PROC_ARGS
+#define glibtop_get_proc_args_r		glibtop_get_proc_args_p
+#else
+#define glibtop_get_proc_args_r		glibtop_get_proc_args_s
+#endif
+
+char *
+glibtop_get_proc_args_l (glibtop *server, glibtop_proc_args *buf,
+			 pid_t pid, unsigned max_len);
+
+#if GLIBTOP_SUID_PROC_ARGS
+void glibtop_init_proc_args_p (glibtop *server);
+
+char *
+glibtop_get_proc_args_p (glibtop *server, glibtop_proc_args *buf,
+			 pid_t pid, unsigned max_len);
+#else
+void glibtop_init_proc_args_s (glibtop *server);
+
+char *
+glibtop_get_proc_args_s (glibtop *server, glibtop_proc_args *buf,
+			 pid_t pid, unsigned max_len);
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_args [];
+extern const unsigned glibtop_types_proc_args [];
+extern const char *glibtop_labels_proc_args [];
+extern const char *glibtop_descriptions_proc_args [];
+
+#endif
+
+END_LIBGTOP_DECLS
+
+#endif
--- a/include/glibtop/prockernel.h
+++ b/include/glibtop/prockernel.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROCKERNEL_H__
 #define __GLIBTOP_PROCKERNEL_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROC_KERNEL_K_FLAGS	0
 #define GLIBTOP_PROC_KERNEL_MIN_FLT	1
@@ -70,33 +72,14 @@ struct _glibtop_proc_kernel
 #define glibtop_get_proc_kernel_r	glibtop_get_proc_kernel_s
 #endif

-extern void glibtop_get_proc_kernel_l __P((glibtop *, glibtop_proc_kernel *, pid_t));
+void glibtop_get_proc_kernel_l (glibtop *server, glibtop_proc_kernel *buf, pid_t pid);

 #if GLIBTOP_SUID_PROC_KERNEL
-extern void glibtop_init_proc_kernel_p __P((glibtop *));
-extern void glibtop_get_proc_kernel_p __P((glibtop *, glibtop_proc_kernel *, pid_t));
+void glibtop_init_proc_kernel_p (glibtop *server);
+void glibtop_get_proc_kernel_p (glibtop *server, glibtop_proc_kernel *buf, pid_t pid);
 #else
-extern void glibtop_init_proc_kernel_s __P((glibtop *));
-extern void glibtop_get_proc_kernel_s __P((glibtop *, glibtop_proc_kernel *, pid_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proc_kernel __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_types_proc_kernel __P((void));
-extern SCM glibtop_guile_names_proc_kernel __P((void));
-extern SCM glibtop_guile_labels_proc_kernel __P((void));
-extern SCM glibtop_guile_descriptions_proc_kernel __P((void));
-
+void glibtop_init_proc_kernel_s (glibtop *server);
+void glibtop_get_proc_kernel_s (glibtop *server, glibtop_proc_kernel *buf, pid_t pid);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -110,6 +93,6 @@ extern const char *glibtop_descriptions_proc_kernel [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/proclist.h
+++ b/include/glibtop/proclist.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROCLIST_H__
 #define __GLIBTOP_PROCLIST_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROCLIST_NUMBER	0
 #define GLIBTOP_PROCLIST_TOTAL	1
@@ -68,33 +70,22 @@ struct _glibtop_proclist
 #define glibtop_get_proclist_r		glibtop_get_proclist_s
 #endif

-extern unsigned *glibtop_get_proclist_l __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
+unsigned *
+glibtop_get_proclist_l (glibtop *server, glibtop_proclist *buf,
+			int64_t which, int64_t arg);

 #if GLIBTOP_SUID_PROCLIST
-extern void glibtop_init_proclist_p __P((glibtop *));
-extern unsigned *glibtop_get_proclist_p __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
+void glibtop_init_proclist_p (glibtop *server);
+
+unsigned *
+glibtop_get_proclist_p (glibtop *server, glibtop_proclist *buf,
+			int64_t which, int64_t arg);
 #else
-extern void glibtop_init_proclist_s __P((glibtop *));
-extern unsigned *glibtop_get_proclist_s __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proclist __P((SCM, SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_proclist __P((void));
-extern SCM glibtop_guile_types_proclist __P((void));
-extern SCM glibtop_guile_labels_proclist __P((void));
-extern SCM glibtop_guile_descriptions_proclist __P((void));
+void glibtop_init_proclist_s (glibtop *server);

+unsigned *
+glibtop_get_proclist_s (glibtop *server, glibtop_proclist *buf,
+			int64_t which, int64_t arg);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -108,6 +99,6 @@ extern const char *glibtop_descriptions_proclist [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/procmap.h
+++ b/include/glibtop/procmap.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROC_MAP_H__
 #define __GLIBTOP_PROC_MAP_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROC_MAP_NUMBER		0
 #define GLIBTOP_PROC_MAP_TOTAL		1
@@ -77,33 +79,19 @@ struct _glibtop_proc_map
 #define glibtop_get_proc_map_r		glibtop_get_proc_map_s
 #endif

-extern glibtop_map_entry *glibtop_get_proc_map_l __P((glibtop *, glibtop_proc_map *, pid_t));
+glibtop_map_entry *
+glibtop_get_proc_map_l (glibtop *server, glibtop_proc_map *buf, pid_t pid);

 #if GLIBTOP_SUID_PROC_MAP
-extern void glibtop_init_proc_map_p __P((glibtop *));
-extern glibtop_map_entry *glibtop_get_proc_map_p __P((glibtop *, glibtop_proc_map *, pid_t));
+void glibtop_init_proc_map_p (glibtop *server);
+
+glibtop_map_entry *
+glibtop_get_proc_map_p (glibtop *server, glibtop_proc_map *buf, pid_t pid);
 #else
-extern void glibtop_init_proc_map_s __P((glibtop *));
-extern glibtop_map_entry *glibtop_get_proc_map_s __P((glibtop *, glibtop_proc_map *, pid_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proc_map __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_proc_map __P((void));
-extern SCM glibtop_guile_types_proc_map __P((void));
-extern SCM glibtop_guile_labels_proc_map __P((void));
-extern SCM glibtop_guile_descriptions_proc_map __P((void));
+void glibtop_init_proc_map_s (glibtop *server);

+glibtop_map_entry *
+glibtop_get_proc_map_s (glibtop *server, glibtop_proc_map *buf, pid_t pid);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -117,6 +105,6 @@ extern const char *glibtop_descriptions_proc_map [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/procmem.h
+++ b/include/glibtop/procmem.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROCMEM_H__
 #define __GLIBTOP_PROCMEM_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROC_MEM_SIZE		0
 #define GLIBTOP_PROC_MEM_VSIZE		1
@@ -61,33 +63,14 @@ struct _glibtop_proc_mem
 #define glibtop_get_proc_mem_r		glibtop_get_proc_mem_s
 #endif

-extern void glibtop_get_proc_mem_l __P((glibtop *, glibtop_proc_mem *, pid_t));
+void glibtop_get_proc_mem_l (glibtop *server, glibtop_proc_mem *buf, pid_t pid);

 #if GLIBTOP_SUID_PROC_MEM
-extern void glibtop_init_proc_mem_p __P((glibtop *));
-extern void glibtop_get_proc_mem_p __P((glibtop *, glibtop_proc_mem *, pid_t));
+void glibtop_init_proc_mem_p (glibtop *server);
+void glibtop_get_proc_mem_p (glibtop *server, glibtop_proc_mem *buf, pid_t pid);
 #else
-extern void glibtop_init_proc_mem_s __P((glibtop *));
-extern void glibtop_get_proc_mem_s __P((glibtop *, glibtop_proc_mem *, pid_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proc_mem __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_types_proc_mem __P((void));
-extern SCM glibtop_guile_names_proc_mem __P((void));
-extern SCM glibtop_guile_labels_proc_mem __P((void));
-extern SCM glibtop_guile_descriptions_proc_mem __P((void));
-
+void glibtop_init_proc_mem_s (glibtop *server);
+void glibtop_get_proc_mem_s (glibtop *server, glibtop_proc_mem *buf, pid_t pid);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -101,6 +84,6 @@ extern const char *glibtop_descriptions_proc_mem [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/procsegment.h
+++ b/include/glibtop/procsegment.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROCSEGMENT_H__
 #define __GLIBTOP_PROCSEGMENT_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROC_SEGMENT_TEXT_RSS		0
 #define GLIBTOP_PROC_SEGMENT_SHLIB_RSS		1
@@ -64,33 +66,14 @@ struct _glibtop_proc_segment
 #define glibtop_get_proc_segment_r	glibtop_get_proc_segment_s
 #endif

-extern void glibtop_get_proc_segment_l __P((glibtop *, glibtop_proc_segment *, pid_t));
+void glibtop_get_proc_segment_l (glibtop *server, glibtop_proc_segment *buf, pid_t pid);

 #if GLIBTOP_SUID_PROC_SEGMENT
-extern void glibtop_init_proc_segment_p __P((glibtop *));
-extern void glibtop_get_proc_segment_p __P((glibtop *, glibtop_proc_segment *, pid_t));
+void glibtop_init_proc_segment_p (glibtop *server);
+void glibtop_get_proc_segment_p (glibtop *server, glibtop_proc_segment *buf, pid_t pid);
 #else
-extern void glibtop_init_proc_segment_s __P((glibtop *));
-extern void glibtop_get_proc_segment_s __P((glibtop *, glibtop_proc_segment *, pid_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proc_segment __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_proc_segment __P((void));
-extern SCM glibtop_guile_types_proc_segment __P((void));
-extern SCM glibtop_guile_labels_proc_segment __P((void));
-extern SCM glibtop_guile_descriptions_proc_segment __P((void));
-
+void glibtop_init_proc_segment_s (glibtop *server);
+void glibtop_get_proc_segment_s (glibtop *server, glibtop_proc_segment *buf, pid_t pid);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -104,6 +87,6 @@ extern const char *glibtop_descriptions_proc_segment [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/include/glibtop/procsignal.h
+++ b/include/glibtop/procsignal.h
@@ -1,23 +1,25 @@
 /* $Id$ */

-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the Gnome Top Library.
+/* Copyright (C) 1998-99 Martin Baulig
+   This file is part of LibGTop 1.0.
+
   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.

-   The Gnome Top Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   LibGTop is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License,
+   or (at your option) any later version.

-   The Gnome Top Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   LibGTop is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+   for more details.

-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with LibGTop; see the file COPYING. If not, write to the
+   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.
+*/

 #ifndef __GLIBTOP_PROCSIGNAL_H__
 #define __GLIBTOP_PROCSIGNAL_H__
@@ -25,7 +27,7 @@
 #include <glibtop.h>
 #include <glibtop/global.h>

-__BEGIN_DECLS
+BEGIN_LIBGTOP_DECLS

 #define GLIBTOP_PROC_SIGNAL_SIGNAL	0
 #define GLIBTOP_PROC_SIGNAL_BLOCKED	1
@@ -41,10 +43,10 @@ typedef struct _glibtop_proc_signal	glibtop_proc_signal;
 struct _glibtop_proc_signal
 {
 	u_int64_t	flags,
-		signal,			/* mask of pending signals */
-		blocked,		/* mask of blocked signals */
-		sigignore,		/* mask of ignored signals */
-		sigcatch;		/* mask of caught  signals */
+		signal [2],		/* mask of pending signals */
+		blocked [2],		/* mask of blocked signals */
+		sigignore [2],		/* mask of ignored signals */
+		sigcatch [2];		/* mask of caught  signals */
 };

 #define glibtop_get_proc_signal(p1, p2)	glibtop_get_proc_signal_l(glibtop_global_server, p1, p2)
@@ -55,33 +57,14 @@ struct _glibtop_proc_signal
 #define glibtop_get_proc_signal_r	glibtop_get_proc_signal_s
 #endif

-extern void glibtop_get_proc_signal_l __P((glibtop *, glibtop_proc_signal *, pid_t));
+void glibtop_get_proc_signal_l (glibtop *server, glibtop_proc_signal *buf, pid_t pid);

 #if GLIBTOP_SUID_PROC_SIGNAL
-extern void glibtop_init_proc_signal_p __P((glibtop *));
-extern void glibtop_get_proc_signal_p __P((glibtop *, glibtop_proc_signal *, pid_t));
+void glibtop_init_proc_signal_p (glibtop *server);
+void glibtop_get_proc_signal_p (glibtop *server, glibtop_proc_signal *buf, pid_t pid);
 #else
-extern void glibtop_init_proc_signal_s __P((glibtop *));
-extern void glibtop_get_proc_signal_s __P((glibtop *, glibtop_proc_signal *, pid_t));
-#endif
-
-#ifdef GLIBTOP_GUILE
-
-/* You need to link with -lgtop_guile to get this stuff here. */
-
-extern SCM glibtop_guile_get_proc_signal __P((SCM));
-
-#endif
-
-#ifdef GLIBTOP_GUILE_NAMES
-
-/* You need to link with -lgtop_guile_names to get this stuff here. */
-
-extern SCM glibtop_guile_names_proc_signal __P((void));
-extern SCM glibtop_guile_types_proc_signal __P((void));
-extern SCM glibtop_guile_labels_proc_signal __P((void));
-extern SCM glibtop_guile_descriptions_proc_signal __P((void));
-
+void glibtop_init_proc_signal_s (glibtop *server);
+void glibtop_get_proc_signal_s (glibtop *server, glibtop_proc_signal *buf, pid_t pid);
 #endif

 #ifdef GLIBTOP_NAMES
@@ -95,6 +78,6 @@ extern const char *glibtop_descriptions_proc_signal [];

 #endif

-__END_DECLS
+END_LIBGTOP_DECLS

 #endif
--- a/Show More
+++ b/Show More