New upstream version 43~beta

Update NEWS.

.eslintrc.yml

@@ -0,0 +1,3 @@
+extends:
+ - ./lint/eslintrc-gjs.yml
+ - ./lint/eslintrc-shell.yml

.gitlab-ci.yml

@@ -0,0 +1,170 @@
+include:
+  - remote: 'https://gitlab.freedesktop.org/freedesktop/ci-templates/-/raw/bbe5232986c9b98eb1efe62484e07216f7d1a4df/templates/fedora.yml'
+  - remote: "https://gitlab.freedesktop.org/freedesktop/ci-templates/-/raw/6f86b8bcb0cd5168c32779c4fea9a893c4a0c046/templates/ci-fairy.yml"
+
+stages:
+  - pre_review
+  - prepare
+  - review
+  - build
+  - deploy
+
+default:
+  image: registry.gitlab.gnome.org/gnome/gnome-shell/fedora/35:2022-02-18.0
+  # Cancel jobs if newer commits are pushed to the branch
+  interruptible: true
+  # Auto-retry jobs in case of infra failures
+  retry:
+    max: 1
+    when:
+      - 'runner_system_failure'
+      - 'stuck_or_timeout_failure'
+      - 'scheduler_failure'
+      - 'api_failure'
+
+variables:
+  FDO_UPSTREAM_REPO: GNOME/gnome-shell-extensions
+  LINT_LOG: "eslint-report.xml"
+
+workflow:
+  rules:
+    - if: '$CI_MERGE_REQUEST_IID'
+    - if: '$CI_COMMIT_TAG'
+    - if: '$CI_COMMIT_BRANCH'
+
+.pipeline_guard: &pipeline_guard
+  rules:
+    - if: '$CI_PIPELINE_SOURCE == "merge_request_event"'
+    - if: '$CI_COMMIT_TAG'
+    - if: '$CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH'
+    - if: '$CI_COMMIT_BRANCH =~ /^gnome-[0-9-]+$/'
+    - when: 'manual'
+
+.gnome-shell-extensions.fedora:34:
+  variables:
+    FDO_DISTRIBUTION_VERSION: 34
+    FDO_DISTRIBUTION_TAG: '2021-08-31.0'
+    FDO_DISTRIBUTION_PACKAGES: >
+      meson git gettext sassc
+
+.prereview_req: &prereview_req
+  needs:
+    - check_commit_log
+    - check-merge-request
+
+check_commit_log:
+  extends:
+    - .fdo.ci-fairy
+  stage: pre_review
+  script:
+    - if [[ x"$CI_MERGE_REQUEST_TARGET_BRANCH_NAME" != "x" ]] ;
+      then
+        ci-fairy check-commits --junit-xml=commit-message-junit-report.xml ;
+      else
+        echo "Not a merge request" ;
+      fi
+  <<: *pipeline_guard
+  artifacts:
+    expire_in: 1 week
+    paths:
+      - commit-message-junit-report.xml
+    reports:
+      junit: commit-message-junit-report.xml
+
+check-merge-request:
+  extends:
+    - .fdo.ci-fairy
+  stage: pre_review
+  script:
+    - if [[ x"$CI_MERGE_REQUEST_TARGET_BRANCH_NAME" != "x" ]] ;
+      then
+        ci-fairy check-merge-request --require-allow-collaboration --junit-xml=check-merge-request-report.xml ;
+      else
+        echo "Not a merge request" ;
+      fi
+  <<: *pipeline_guard
+  artifacts:
+    expire_in: 1 week
+    paths:
+      - check-merge-request-report.xml
+    reports:
+      junit: check-merge-request-report.xml
+
+build-fedora-container:
+  extends:
+    - .fdo.container-build@fedora@x86_64
+    - .gnome-shell-extensions.fedora:34
+  stage: prepare
+  <<: *prereview_req
+
+js_check:
+  stage: review
+  <<: *prereview_req
+  script:
+    - gjs-check-syntax
+
+eslint:
+  stage: review
+  <<: *prereview_req
+  script:
+    - eslint -o $LINT_LOG -f junit --resolve-plugins-relative-to $(npm root -g) extensions
+  artifacts:
+    paths:
+      - ${LINT_LOG}
+    reports:
+      junit: ${LINT_LOG}
+
+build-bundles:
+  stage: build
+  <<: *prereview_req
+  script:
+    - ./export-zips.sh
+  artifacts:
+    name: 'Extension bundles'
+    expose_as: 'Get Extension bundles here'
+    paths:
+      - zip-files/
+
+fedora-build:
+  extends:
+    - .fdo.distribution-image@fedora
+    - .gnome-shell-extensions.fedora:34
+  stage: build
+  needs:
+    - build-fedora-container
+  variables:
+    GIT_SUBMODULE_STRATEGY: normal
+  script:
+    - meson setup build --werror -Dextension_set=all -Dclassic_mode=true
+    - meson compile -C build
+    - meson test -C build
+    - meson install -C build
+  artifacts:
+    paths:
+      - build
+
+fedora-dist:
+  extends:
+    - .fdo.distribution-image@fedora
+    - .gnome-shell-extensions.fedora:34
+  stage: deploy
+  needs:
+    - fedora-build
+  variables:
+    GIT_SUBMODULE_STRATEGY: normal
+  script:
+    - meson dist -C build
+  rules:
+    - if: '$CI_PIPELINE_SOURCE == "merge_request_event"'
+      changes:
+        - "**/meson.build"
+        - meson/*
+
+fedora-dist-tarball:
+  extends: fedora-dist
+  artifacts:
+    expose_as: 'Get tarball here'
+    paths:
+      - build/meson-dist/$CI_PROJECT_NAME-$CI_COMMIT_TAG.tar.xz
+  rules:
+    - if: '$CI_COMMIT_TAG'

.gitlab-ci/commit-rules.yml

@@ -0,0 +1,13 @@
+patterns:
+  deny:
+    - regex: '^$CI_MERGE_REQUEST_PROJECT_URL/(-/)?merge_requests/$CI_MERGE_REQUEST_IID$'
+      message: Commit message must not contain a link to its own merge request
+    - regex: '^extensions/'
+      message: Commit message subject should not be prefixed with 'extensions/', use the extension name instead
+      where: subject
+    - regex: '^[^:]+: [a-z]'
+      message: "Commit message subject should be properly Capitalized. E.g.  'window: Marginalize extradicity'"
+      where: subject
+    - regex: '^\S*\.js:'
+      message: Commit message subject prefix should not include .js
+      where: subject

HACKING.md

@@ -0,0 +1,31 @@
+## Creating a New Extension
+
+To create a new extension, add a subdirectory in extensions. Then create
+a meson.build from the provided [template](extensions/meson.build.template).
+If you need additional sources, add them to extension_sources. Similarily add
+GSettings schemas to extension_schemas and other files to extension_data.
+
+Then modify the [toplevel Meson file](meson.build) to add the new
+extension name in the appropriate set (that is one of classic_extensions,
+default_extensions or all_extensions).
+
+Don't forget to add any translatable file to po/POTFILES.in, and
+then you're done.
+The Gettext domain you should choose is gnome-shell-extensions,
+not gnome-shell, unless you're sure there is the string you
+need in gnome-shell.
+
+## Coding Style
+
+Generally, we follow [GJS coding style][coding-style], which in short is:
+indent 4 spaces, no tabs, space after comma, no space after function call.
+
+The Emacs mode line for this
+/* -*- mode: js2; js2-basic-offset: 4; indent-tabs-mode: nil -*- */
+
+Imports should be at the top, in two groups, one for standard
+imports (like imports.lang or imports.dbus) and introspection,
+the other for Shell API. Within the same group, put everything
+in alphabetic order.
+
+[coding-style]: https://gitlab.gnome.org/GNOME/gjs/blob/HEAD/doc/Style_Guide.md

Makefile.am

@@ -1,52 +0,0 @@
-ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
-
-DIST_SUBDIRS = data extensions po
-
-SUBDIRS = extensions po
-
-if CLASSIC_MODE
-SUBDIRS += data
-endif
-
-EXTRA_DIST = lib/convenience.js
-
-DISTCHECK_CONFIGURE_FLAGS = --enable-extensions=all
-
-include include.mk
-
-zip-file: all
-	-rm -fR $(builddir)/_build
-	-rm -fR $(builddir)/zip-files
-	$(MKDIR_P) $(builddir)/_build; \
-	$(MKDIR_P) $(builddir)/zip-files; \
-	$(MAKE) install DESTDIR="$(abs_builddir)/_build"; \
-	for i in $(ENABLED_EXTENSIONS); do \
-		mv "$(builddir)/_build$(topextensiondir)/$${i}$(extensionbase)" "$(builddir)/_build/"; \
-		cp -r "$(builddir)/_build$(datadir)/locale" "$(builddir)/_build/$${i}$(extensionbase)"; \
-		cp "$(srcdir)/COPYING" -t "$(builddir)/_build/$${i}$(extensionbase)"; \
-		cp "$(srcdir)/NEWS" -t "$(builddir)/_build/$${i}$(extensionbase)"; \
-		if [ -f "$(builddir)/_build$(datadir)/glib-2.0/schemas/$(gschemabase).$${i}.gschema.xml" ]; then \
-			$(MKDIR_P) "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-			mv "$(builddir)/_build$(datadir)/glib-2.0/schemas/$(gschemabase).$${i}.gschema.xml" "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-			glib-compile-schemas "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-		fi; \
-		(cd "$(builddir)/_build/$${i}$(extensionbase)"; \
-		 zip -qr "$(abs_builddir)/zip-files/$${i}$(extensionbase).shell-extension.zip" .; \
-		); \
-	done
-	-rm -fR $(builddir)/_build
-
-localprefix = $(HOME)/.local/share/gnome-shell/extensions
-
-local-install: zip-file
-	for i in $(ENABLED_EXTENSIONS); do \
-	    uuid="$${i}$(extensionbase)"; \
-	    zip_file="$(abs_builddir)/zip-files/$${uuid}.shell-extension.zip"; \
-	    if [ -d "$(localprefix)/$${uuid}" ]; then \
-		rm -fR "$(localprefix)/$${uuid}"; \
-	    fi; \
-	    $(MKDIR_P) $(localprefix)/$${uuid}; \
-	    (cd $(localprefix)/$${uuid}; \
-		unzip -q $${zip_file}; \
-	    ); \
-	done

Makefile.in

@@ -1,845 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@CLASSIC_MODE_TRUE@am__append_1 = data
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/include.mk \
-	$(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
-	$(top_srcdir)/config/config.rpath \
-	$(top_srcdir)/config/config.sub \
-	$(top_srcdir)/config/install-sh $(top_srcdir)/config/missing \
-	ABOUT-NLS COPYING NEWS README config/compile \
-	config/config.guess config/config.rpath config/config.sub \
-	config/install-sh config/missing
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-GZIP_ENV = --best
-DIST_ARCHIVES = $(distdir).tar.xz
-DIST_TARGETS = dist-xz
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
-DIST_SUBDIRS = data extensions po
-SUBDIRS = extensions po $(am__append_1)
-EXTRA_DIST = lib/convenience.js
-DISTCHECK_CONFIGURE_FLAGS = --enable-extensions=all
-extensionurl = http://git.gnome.org/gnome-shell-extensions
-
-# Change these to modify how installation is performed
-topextensiondir = $(datadir)/gnome-shell/extensions
-extensionbase = @gnome-shell-extensions.gcampax.github.com
-gschemabase = org.gnome.shell.extensions
-uuid = $(EXTENSION_ID)$(extensionbase)
-gschemaname = $(gschemabase).$(EXTENSION_ID)
-extensiondir = $(topextensiondir)/$(uuid)
-localprefix = $(HOME)/.local/share/gnome-shell/extensions
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/include.mk $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-$(srcdir)/include.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
-	  && ../../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
-	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags tags-am uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-
-zip-file: all
-	-rm -fR $(builddir)/_build
-	-rm -fR $(builddir)/zip-files
-	$(MKDIR_P) $(builddir)/_build; \
-	$(MKDIR_P) $(builddir)/zip-files; \
-	$(MAKE) install DESTDIR="$(abs_builddir)/_build"; \
-	for i in $(ENABLED_EXTENSIONS); do \
-		mv "$(builddir)/_build$(topextensiondir)/$${i}$(extensionbase)" "$(builddir)/_build/"; \
-		cp -r "$(builddir)/_build$(datadir)/locale" "$(builddir)/_build/$${i}$(extensionbase)"; \
-		cp "$(srcdir)/COPYING" -t "$(builddir)/_build/$${i}$(extensionbase)"; \
-		cp "$(srcdir)/NEWS" -t "$(builddir)/_build/$${i}$(extensionbase)"; \
-		if [ -f "$(builddir)/_build$(datadir)/glib-2.0/schemas/$(gschemabase).$${i}.gschema.xml" ]; then \
-			$(MKDIR_P) "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-			mv "$(builddir)/_build$(datadir)/glib-2.0/schemas/$(gschemabase).$${i}.gschema.xml" "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-			glib-compile-schemas "$(builddir)/_build/$${i}$(extensionbase)/schemas"; \
-		fi; \
-		(cd "$(builddir)/_build/$${i}$(extensionbase)"; \
-		 zip -qr "$(abs_builddir)/zip-files/$${i}$(extensionbase).shell-extension.zip" .; \
-		); \
-	done
-	-rm -fR $(builddir)/_build
-
-local-install: zip-file
-	for i in $(ENABLED_EXTENSIONS); do \
-	    uuid="$${i}$(extensionbase)"; \
-	    zip_file="$(abs_builddir)/zip-files/$${uuid}.shell-extension.zip"; \
-	    if [ -d "$(localprefix)/$${uuid}" ]; then \
-		rm -fR "$(localprefix)/$${uuid}"; \
-	    fi; \
-	    $(MKDIR_P) $(localprefix)/$${uuid}; \
-	    (cd $(localprefix)/$${uuid}; \
-		unzip -q $${zip_file}; \
-	    ); \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

NEWS

@@ -1,6 +1,578 @@
-3.26.2
+43.beta
+=======
+* Misc. bug fixes and cleanups [Florian; !237, !238]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Nart Tlisha [ab]
+
+43.alpha
+========
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Marco Ciampa [it]
+
+42.3
+====
+* screenshot-window-sizer: Fix reported sizes on wayland [Florian; !232]
+* window-list: Improve touch support [Florian; !233]
+
+Contributors:
+  Florian Müllner
+
+42.2
+====
+* native-window-placement: Adjust to gnome-shell 42 changes [Florian; !229]
+* window-list: Fix visibility on non-primary monitors [Jason; !230]
+
+Contributors:
+  Jason Lynch, Florian Müllner
+
+Translators:
+  Cheng-Chia Tseng [zh_TW]
+
+42.1
+====
+* Misc. bug fixes and cleanups [Florian; !223, !222, !225]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Milo Casagrande [it], Rūdolfs Mazurs [lv], Nathan Follens [nl],
+  Ngọc Quân Trần [vi], Zurab Kargareteli [ka]
+
+42.0
+====
+
+Translators:
+  Philipp Kiemle [de], Balázs Úr [hu], Марко Костић [sr], sicklylife [ja],
+  Baurzhan Muftakhidinov [kk]
+
+42.rc
+=====
+* Misc. bug fixes and cleanups [Florian; !215, !218]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Marek Černocký [cs], Dušan Kazik [sk], Piotr Drąg [pl], Jiri Grönroos [fi],
+  Luna Jernberg [sv], Alan Mortensen [da], Charles Monzat [fr],
+  Changwoo Ryu [ko]
+
+42.beta
+=======
+* workspace-indicator: Fix cancelling editing with Esc [Florian; !208]
+* window-list: Update window tracking to avoid missing icons [Florian; !207]
+* Use libadwaita for preferences [Florian; !209, !213]
+* Adapt to Clutter grab API changes [Florian; !212]
+* Misc. bug fixes and cleanups [Jan, Florian; !210, !214]
+
+Contributors:
+  Jan Beich, Florian Müllner, Naala Nanba
+
+Translators:
+  Boyuan Yang [zh_CN], Matej Urbančič [sl], Naala Nanba [ab],
+  Alexander Shopov [bg], Emin Tufan Çetin [tr]
+
+42.alpha
+========
+* native-window-placement: Fix distorted layout in app grid [Sebastian; !189]
+* window-list: Fix on-screen keyboard [Florian; !199]
+* Misc. bug fixes and cleanups [Neal; Just; !195, !197]
+
+Contributors:
+  Piotr Drąg, Neal Gompa, Sebastian Keller, Florian Müllner, Just Perfection
+
+Translators:
+  Goran Vidović [hr], Sveinn í Felli [is], Yuri Chornoivan [uk],
+  Fabio Tomat [fur], Quentin PAGÈS [oc], Hugo Carvalho [pt],
+  Yaron Shahrabani [he], Jordi Mas i Hernandez [ca], MohammadSaleh Kamyab [fa],
+  Fran Dieguez [gl], Daniel Mustieles [es], Aleksandr Melman [ru],
+  Aurimas Černius [lt], Asier Sarasua Garmendia [eu], Kukuh Syafaat [id],
+  Rafael Fontenelle [pt_BR]
+
+41.0
+====
+* Bump version
+
+41.rc.1
+=======
+* Fix pre-generating stylesheets in tarball [Florian; !190]
+
+Contributors:
+  Florian Müllner
+
+41.rc
+=====
+* window-list: Adapt to overview-on-startup [Florian; !185]
+* apps-menu: Use a custom 'toggle-menu' shortcut [Florian; !173]
+* Misc. bug fixes and cleanups [Florian; !186]
+
+Contributors:
+  Florian Müllner
+
+41.beta
+=======
+* window-list: Extend reactive area of minimap to screen edges [Adam; !171]
+* drive-menu: Improve detection of network mounts [Florian; !27, !176]
+* Use distinct gettext domain for e.g.o uploads [Florian; #335]
+* Misc. bug fixes and cleanups [Florian; !172, !174, !177, !167, !178, !180,
+  !181, !182, !183]
+
+Contributors:
+  Marco Trevisan (Treviño), Adam Goode, Florian Müllner
+
+Translators:
+  Hugo Carvalho [pt], Juliano de Souza Camargo [pt], Alexander Shopov [bg]
+
+40.1
+====
+* Disable welcome dialog in classic session [Florian; !169]
+* windowsNavigator: Adjust to a late gnome-shell change [Florian; !170]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Ngọc Quân Trần [vi], Anders Jonsson [sv], Carmen Bianca BAKKER [eo],
+  Pawan Chitrakar [ne], Quentin PAGÈS [oc]
+
+40.0
+====
+
+Translators:
+  Jiri Grönroos [fi]
+
+40.rc
+=====
+* native-window-placement: Adjust to gnome-shell changes [Florian; !164]
+* windows-navigator: Adjust to gnome-shell changes [Florian; !163]
+* window-list, workspace-indicator: Only show previews for up to six workspaces
+  [Florian; !165]
+* window-list, workspace-indicator: Improve workspace preview appearance
+  [Florian; !166]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Fran Dieguez [gl]
+
+40.beta
+=======
+* Add tooltips to workspace thumbnails [Florian; !155]
+* Drop arrows from top bar menus [Florian; !156]
+* drive-menu: Mark mounts that can be unmounted as removable [Michael; !152]
+* Remove horizontal-workspaces extension [Florian; !158]
+* Adjust to shell overview changes [Florian; !159, !160]
+* Fix crashes [Daniel; !157]
+* Misc. bug fixes and cleanups [Florian; !154, !161]
+
+Contributors:
+  Michael Lawton, Florian Müllner, Daniel van Vugt
+
+Translators:
+  Аляксей [be], A S Alam [pa]
+
+40.alpha.1
+==========
+* Don't depend on sassc when building from tarball [Florian; !150]
+* Port extensions preferences to GTK4 [Florian; !148]
+* Misc. bug fixes and cleanups [Florian, Jonas; !149, !151, !153]
+
+Contributors:
+  Jonas Dreßler, Florian Müllner
+
+40.alpha
+========
+* window-list: Honor changes in skip-taskbar property [Sergio; !130]
+* window-list, workspace-indicator: Adjust to 3.38 changes [Florian; !133]
+* window-list, workspace-indicator: Improve previews in workspace thumbs
+  [Florian; #260, !142]
+* auto-move: Improve behavior on multi-monitor setups [Florian; !135]
+* windowNavigator: Adjust to 3.38 changes [Thun; #259]
+* Misc. bug fixes and cleanups [Florian, Jonas Å, Jordan, Ray; !131, !136,
+  !137, !140, !141, !144, !146, !145]
+
+Contributors:
+  Sergio Costas, Florian Müllner, Jordan Petridis, Thun Pin, Ray Strode,
+  Jonas Ådahl
+
+Translators:
+  Fabio Tomat [fur], Jordi Mas [ca]
+
+3.38.1
 ======
-* updated translations: (ca@valencia)
+
+Contributors:
+  Yacine Bouklif, Florian Müllner
+
+Translators:
+  Yacine Bouklif [kab], Cheng-Chia Tseng [zh_TW], Stas Solovey [ru],
+  Yosef Or Boczko [he]
+
+3.38.0
+======
+
+Translators:
+  Balázs Meskó [hu], Alan Mortensen [da], Juliano Camargo [pt], Tim Sabsch [de],
+  Milo Casagrande [it], Rūdolfs Mazurs [lv]
+
+3.37.92
+=======
+
+Translators:
+  Nathan Follens [nl], Zander Brown [en_GB], Aurimas Černius [lt],
+  Marek Černocký [cs], Changwoo Ryu [ko], Dušan Kazik [sk]
+
+3.37.91
+=======
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Fran Dieguez [gl], Akarshan Biswas [bn_IN], Kukuh Syafaat [id],
+  Piotr Drąg [pl], Rafael Fontenelle [pt_BR], Jiri Grönroos [fi],
+  Марко Костић [sr], Goran Vidović [hr]
+
+3.37.90
+=======
+* Misc. bug fixes and cleanups [Florian, Piotr; !126, !128]
+
+Contributors:
+  Piotr Drąg, Florian Müllner
+
+Translators:
+  Fabio Tomat [fur], Efstathios Iosifidis [el], Anders Jonsson [sv],
+  Asier Sarasua Garmendia [eu], Alexandre Franke [fr]
+
+3.37.3
+======
+* window-list, native-window-placement: Adjust to shell changes [Florian; !124]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Jordi Mas [ca], sicklylife [ja], Boyuan Yang [zh_CN],
+  Baurzhan Muftakhidinov [kk]
+
+3.37.2
+======
+* window-list, auto-move: Modernize preference dialogs [Florian; !121]
+* Adjust to gnome-shell changes [Florian; !122]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Cheng-Chia Tseng [zh_TW], Yuri Chornoivan [uk], Daniel Mustieles [es],
+  Emin Tufan Çetin [tr], Danial Behzadi [fa], Daniel Șerbănescu [ro],
+  Matej Urbančič [sl]
+
+3.37.1
+======
+* drive-menu: Emphasize eject buttons [Florian; #223]
+* user-theme: Add preference dialog [Florian; !117]
+* window-list: Fix inconsistent state in preference dialog [Milan; !119]
+* workspace-indicator: Overhaul preference dialog [Florian; !120]
+* user-theme: Support session mode styles [Florian; !118]
+* Misc. bug fixes and cleanups [Florian, Xiaoguang; !113, !106, !114, !116]
+
+Contributors:
+  Milan Crha, Florian Müllner, Xiaoguang Wang
+
+Translators:
+  Daniel Korostil [uk], Yosef Or Boczko [he], Kristjan SCHMIDT [eo],
+  Dz Chen [zh_CN], Danial Behzadi [fa], Yuri Chornoivan [uk],
+  Anders Jonsson [sv], Daniel Mustieles [es]
+
+3.36.0
+======
+
+Contributors:
+  Florian Müllner
+
+3.35.91
+=======
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Zander Brown [en_GB]
+
+3.35.90
+=======
+* Adjust to gnome-shell changes [Florian; !100, !101, !102]
+* Force single-line window titles in window list [Florian; #202]
+* Misc. bug fixes and cleanup [Florian; !104, !105]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  sicklylife [ja], Umarzuki Bin Mochlis Moktar [ms]
+
+3.35.3
+======
+
+Translators:
+  Fran Dieguez [gl]
+
+3.35.2
+======
+* Adjust to gnome-shell changes [Marco, Florian; !89, !95, !96]
+* window-list, workspace-indicator: Exclude DESKTOP windows from previews
+  [Florian; !93]
+* screenshot-window-sizer: Fix cycling through all valid sizes [Willy; !97]
+
+Contributors:
+  Marco Trevisan (Treviño), Florian Müllner, Willy Stadnick
+
+3.34.1
+======
+* Adjust to gnome-settings-daemon plugin removals [Xiaoguang; !94]
+
+Contributors:
+  Florian Müllner, Xiaoguang Wang
+
+Translators:
+  Nathan Follens [nl], Dušan Kazik [sk], Ask Hjorth Larsen [da],
+  Yi-Jyun Pan [zh_TW]
+
+3.34.0
+======
+
+Translators:
+  Rafael Fontenelle [pt_BR], Efstathios Iosifidis [el], Milo Casagrande [it],
+  Sabri Ünal [tr]
+
+3.33.92
+=======
+
+Translators:
+  Марко Костић [sr], Tim Sabsch [de], Rūdolfs Mazurs [lv], Matej Urbančič [sl],
+  Balázs Úr [hu], Claude Paroz [fr], Fran Dieguez [gl], Changwoo Ryu [ko],
+  Ryuta Fujii [ja], Fabio Tomat [fur], Goran Vidović [hr]
+
+3.33.91
+=======
+* Misc. bug fixes and cleanups [Florian; !88, !90, !91, !92]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Asier Sarasua Garmendia [eu], Anders Jonsson [sv], Marek Černocký [cs],
+  Kukuh Syafaat [id], Jiri Grönroos [fi], Florentina Mușat [ro],
+  Aurimas Černius [lt], Daniel Mustieles [es], Piotr Drąg [pl], Jordi Mas [ca],
+  Danial Behzadi [fa]
+3.33.90
+=======
+* window-list: Support showing windows from all workspaces [Florian; #154]
+* Misc. bug fixes and cleanups [Florian; !86, !87]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Jor Teron [mjw]
+
+3.33.4
+======
+* Make GNOME Classic more classic:
+  - Disable GNOME 3 overview [Florian; !69]
+  - Add window picker button to window list [Florian; !73, !80]
+  - Style improvements and fixes [Jakub; #169, !82]
+  - Support horizontal workspace layout in window list [Florian; !70]
+  - Add draggable previews to window list workspace switcher [Florian; !74]
+  - Arrange workspaces horizontally [Florian; !72]
+* workspace-indicator: Support horizontal workspace layout [Florian; !71]
+* workspace-indicator: Add draggable previews [Florian; !77]
+* Misc. bug fixes and cleanups [Florian; !75, !76, !79, !78, #168, !84]
+
+Contributors:
+  Florian Müllner, Jakub Steiner, Jor Teron
+
+Translators:
+  Jor Teron [mjw]
+
+3.33.3
+======
+* Misc. bug fixes [Florian, Marco; !67, !68]
+
+Contributors:
+  Florian Müllner, Marco Trevisan (Treviño)
+
+3.33.2
+======
+* Misc. bug fixes and cleanups [Florian; !66]
+
+Contributors:
+  Florian Müllner
+
+3.33.1
+======
+* Misc. bug fixes [Florian; !64]
+
+Contributors:
+  Florian Müllner
+
+3.32.1
+======
+* Fix windowsNavigator extension after ES6 port [Florian; #143]
+* screenshot-window-sizer: Add phone screenshot sizes [Adrien; !65]
+* Misc. bug fixes and cleanups [Fabian; !62]
+
+Contributors:
+  Florian Müllner, Adrien Plazas, Fabian P. Schmidt
+
+3.32.0
+======
+
+Contributors:
+  Florian Müllner
+
+Translations:
+  Victor Ibragimov [tg], Kristjan SCHMIDT [eo], Mart Raudsepp [et]
+
+3.31.92
+=======
+* Misc. bug fixes and cleanups [Florian; !57, !58, !59, !60]
+
+Contributors:
+  Florian Müllner
+
+3.31.91
+=======
+* apps-menu: Remove outdated legacy-tray handling [Florian; !53]
+* user-theme: Allow using XDG user data dir [Tomasz; !55]
+* Misc. bug fixes and cleanups [Florian; !52, !54, !56]
+
+Contributors:
+  Tomasz Gąsior, Florian Müllner
+
+Translators:
+  Matej Urbančič [sl], Gun Chleoc [gd]
+
+3.31.90
+=======
+* Misc. bug fixes and cleanups [Florian; !49, !50, !51]
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Ryuta Fujii [ja], Charles Monzat [fr], Pieter Schalk Schoeman [af]
+
+3.31.2
+======
+* Remove obsolete alternate-tab extension [Florian; #786496]
+* Adjust to gnome-shell changes [Florian; #113]
+
+Contributors:
+  Florian Müllner
+
+3.30.1
+======
+* apps-menu: Fix height on HiDPI systems [Florian; #102]
+* window-list: Only switch between windows on active workspace when scrolling
+  [Florian; #78]
+
+Contributors:
+  Florian Müllner
+
+3.30.0
+======
+* Bump version
+
+3.29.91
+=======
+* Misc. bug fixes [Florian; #90]
+
+Contributors:
+  Florian Müllner
+
+3.29.90
+=======
+* Misc. bug fixes [Florian; #786496]
+
+Contributors:
+  Florian Müllner
+
+3.29.3
+======
+* Adjust to global.screen removal [Jonas; #759538]
+
+Contributors:
+  Jonas Ådahl, Florian Müllner
+
+3.29.2
+======
+* Misc. bug fixes [Florian; #69]
+
+Contributors:
+  Florian Müllner
+
+3.28.1
+======
+* Misc. bug fixes [Xiaoguang, Florian; #59, #62]
+
+Contributors:
+  Florian Müllner, Xiaoguang Wang
+
+Translators:
+  Dz Chen [zh_CN]
+
+3.28.0
+======
+
+Contributors:
+  Florian Müllner, Xiaoguang Wang
+
+Translators:
+  Aman Alam [pa], Bruce Cowan [en_GB]
+
+3.27.92
+=======
+
+Contributors:
+  Florian Müllner
+
+Translators:
+  Piotr Drąg [es], GNOME Translation Robot [gd], Daniel Șerbănescu [ro]
+
+3.27.91
+=======
+* places-menu: Support unmounting ejectable places [Rémy; #17]
+* apps-menu: Support separators and custom sort order [Florian; #27]
+* Port to meson [Florian; #31, #45]
+* window-list: Fix missing icons on wayland [Florian; #10]
+* places-menu: Fix terminating gnome-shell with recent gjs [Florian; #44]
+* auto-move: Make it work with wayland windows [Florian; #33]
+* Classic theme fixes [Florian, Jonas; #26, #41, #39, #40]
+* Require sassc for classic styling [Florian; !28]
+* Misc. bug fixes [Piotr, Florian; #772211, #32, #30]
+
+Contributors:
+  Jeremy Bicha, Piotr Drąg, Jonas Kümmerlin, Rémy Lefevre, Iñigo Martínez,
+  Florian Müllner
+
+Translators:
+  Matej Urbančič [sl], Kjartan Maraas [nb]
+
+3.27.1
+======
+* updated translations (ca@valencia)
 
 3.26.1
 ======

README

@@ -1,74 +0,0 @@
-GNOME Shell Extensions is a collection of extensions providing additional
-and optional functionality to GNOME Shell.
-
-Since GNOME Shell is not API stable, extensions work only against a very
-specific version of the shell, usually the same as this package (see
-"configure --version"). The extensions in this package are supported by GNOME
-and will be updated to reflect future API changes in GNOME Shell.
-
-For more information about GNOME Shell Extensions
- https://wiki.gnome.org/Projects/GnomeShell/Extensions
-
-For general information about GNOME Shell
- https://wiki.gnome.org/Projects/GnomeShell
-
-Bugs should be reported at https://bugzilla.gnome.org against the 'gnome-shell'
-product, with the 'extensions' component.
-
-Extensions
-==========
-
-alternate-tab
-
-  Lets you use classic Alt+Tab (window-based instead of app-based) in GNOME Shell.
-
-apps-menu
-
-  Lets you reach an application using gnome 2.x style menu on the panel.
-
-auto-move-windows
-
-  Lets you manage your workspaces more easily, assigning a specific workspace to
-each application as soon as it creates a window, in a manner configurable with a
-GSettings key.
-
-dock
-
-  Shows a dock-style task switcher on the right side of the screen.
-
-drive-menu
-  Shows a status menu for rapid unmount and power off of external storage devices
-  (i.e. pendrives)
-
-example
-
-  A minimal example illustrating how to write extensions.
-
-gajim
-
-  Integration with Gajim, a Jabber/XMPP instant messaging client.
-
-native-window-placement
-
-  An alternative algorithm for layouting the thumbnails in the windows overview, that
-  more closely reflects the actual positions and sizes.
-
-places-menu
-
-  Shows a status Indicator for navigating to Places.
-
-user-theme
-
-  Loads a shell theme from ~/.themes/<name>/gnome-shell.
-
-windowsNavigator
-
-  Allow keyboard selection of windows and workspaces in overlay mode.
-
-License
-=======
-GNOME Shell Extensions are distributed under the terms of the GNU General Public License,
-version 2 or later. See the COPYING file for details.
-Individual extensions may be licensed under different terms, see each source
-file for details.
-

README.md

@@ -0,0 +1,96 @@
+# GNOME Shell Extensions
+
+GNOME Shell Extensions is a collection of extensions providing additional
+and optional functionality to GNOME Shell.
+
+Since GNOME Shell is not API stable, extensions work only against a very
+specific version of the shell, usually the same as this package (see
+"configure --version"). The extensions in this package are supported by GNOME
+and will be updated to reflect future API changes in GNOME Shell.
+
+The GNOME wiki has more information about [GNOME Shell Extensions][project-page],
+as well as some general information about [GNOME Shell][shell-page].
+
+Bugs should be reported to the GNOME [bug tracking system][bug-tracker].
+
+## Extensions
+
+ * alternate-tab (**OBSOLETE**)
+ 
+     Lets you use classic Alt+Tab (window-based instead of app-based) in GNOME Shell.
+     This extension is obsolete since GNOME 3.30, see [this blogpost][alternatetab-post]
+     for further details.
+
+ * apps-menu
+
+     Lets you reach an application using gnome 2.x style menu on the panel.
+
+ * auto-move-windows
+
+     Lets you manage your workspaces more easily, assigning a specific workspace to
+each application as soon as it creates a window, in a manner configurable with a
+GSettings key.
+
+ * drive-menu
+ 
+     Shows a status menu for rapid unmount and power off of external storage devices
+  (i.e. pendrives)
+
+ * launch-new-instance
+
+     Changes application icons to always launch a new instance when activated.
+
+ * native-window-placement
+
+     An alternative algorithm for layouting the thumbnails in the windows overview, that
+  more closely reflects the actual positions and sizes.
+
+ * places-menu
+
+     Shows a status Indicator for navigating to Places.
+
+ * screenshot-window-sizer
+
+     Adds a shortcut for resizing the focus window to a size that is suitable for GNOME Software screenshots
+
+ * user-theme
+
+     Loads a shell theme from ~/.themes/<name>/gnome-shell.
+
+ * window-list
+
+     Adds a bottom panel with a traditional window list.
+
+ * windowsNavigator
+
+     Allow keyboard selection of windows and workspaces in overlay mode.
+
+ * workspace-indicator
+
+     Adds a simple workspace switcher to the top bar.
+
+## Default branch
+
+The default development branch is `main`. If you still have a local
+checkout under the old name, use:
+```sh
+git checkout master
+git branch -m master main
+git fetch
+git branch --unset-upstream
+git branch -u origin/master
+git symbolic-ref refs/remotes/origin/HEAD refs/remotes/origin/main
+```
+
+## License
+
+GNOME Shell Extensions are distributed under the terms of the GNU General
+Public License, version 2 or later. See the [COPYING file][license] for details.
+Individual extensions may be licensed under different terms, see each source
+file for details.
+
+[project-page]: https://wiki.gnome.org/Projects/GnomeShell/Extensions
+[shell-page]: https://wiki.gnome.org/Projects/GnomeShell
+[bug-tracker]: https://gitlab.gnome.org/GNOME/gnome-shell-extensions/issues
+[license]: COPYING
+[alternatetab-post]: https://blogs.gnome.org/fmuellner/2018/10/11/the-future-of-alternatetab-and-why-you-need-not-worry/

config/compile

@@ -1,348 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2016-01-11.22; # UTC
-
-# Copyright (C) 1999-2017 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" ""	$nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv/,$2, in
-	*,$file_conv,*)
-	  ;;
-	mingw/*)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin/*)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine/*)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
-  func_file_conv "$1"
-  if test -z "$lib_path"; then
-    lib_path=$file
-  else
-    lib_path="$lib_path;$file"
-  fi
-  linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
-  lib=$1
-  found=no
-  save_IFS=$IFS
-  IFS=';'
-  for dir in $lib_path $LIB
-  do
-    IFS=$save_IFS
-    if $shared && test -f "$dir/$lib.dll.lib"; then
-      found=yes
-      lib=$dir/$lib.dll.lib
-      break
-    fi
-    if test -f "$dir/$lib.lib"; then
-      found=yes
-      lib=$dir/$lib.lib
-      break
-    fi
-    if test -f "$dir/lib$lib.a"; then
-      found=yes
-      lib=$dir/lib$lib.a
-      break
-    fi
-  done
-  IFS=$save_IFS
-
-  if test "$found" != yes; then
-    lib=$lib.lib
-  fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
-  # Assume a capable shell
-  lib_path=
-  shared=:
-  linker_opts=
-  for arg
-  do
-    if test -n "$eat"; then
-      eat=
-    else
-      case $1 in
-	-o)
-	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
-	  eat=1
-	  case $2 in
-	    *.o | *.[oO][bB][jJ])
-	      func_file_conv "$2"
-	      set x "$@" -Fo"$file"
-	      shift
-	      ;;
-	    *)
-	      func_file_conv "$2"
-	      set x "$@" -Fe"$file"
-	      shift
-	      ;;
-	  esac
-	  ;;
-	-I)
-	  eat=1
-	  func_file_conv "$2" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-I*)
-	  func_file_conv "${1#-I}" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-l)
-	  eat=1
-	  func_cl_dashl "$2"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-l*)
-	  func_cl_dashl "${1#-l}"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-L)
-	  eat=1
-	  func_cl_dashL "$2"
-	  ;;
-	-L*)
-	  func_cl_dashL "${1#-L}"
-	  ;;
-	-static)
-	  shared=false
-	  ;;
-	-Wl,*)
-	  arg=${1#-Wl,}
-	  save_ifs="$IFS"; IFS=','
-	  for flag in $arg; do
-	    IFS="$save_ifs"
-	    linker_opts="$linker_opts $flag"
-	  done
-	  IFS="$save_ifs"
-	  ;;
-	-Xlinker)
-	  eat=1
-	  linker_opts="$linker_opts $2"
-	  ;;
-	-*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
-	  func_file_conv "$1"
-	  set x "$@" -Tp"$file"
-	  shift
-	  ;;
-	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
-	  func_file_conv "$1" mingw
-	  set x "$@" "$file"
-	  shift
-	  ;;
-	*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-      esac
-    fi
-    shift
-  done
-  if test -n "$linker_opts"; then
-    linker_opts="-link$linker_opts"
-  fi
-  exec "$@" $linker_opts
-  exit 1
-}
-
-eat=
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
-  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
-    func_cl_wrapper "$@"      # Doesn't return...
-    ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as 'compile cc -o foo foo.c'.
-	# So we strip '-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no '-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # '.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

config/config.rpath

@@ -1,684 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-#   Copyright 1996-2015 Free Software Foundation, Inc.
-#   Taken from GNU libtool, 2001
-#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-#   This file is free software; the Free Software Foundation gives
-#   unlimited permission to copy and/or distribute it, with or without
-#   modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-#   than 256 bytes, otherwise the compiler driver will dump core. The only
-#   known workaround is to choose shorter directory names for the build
-#   directory and/or the installation directory.
-
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
-  wl='-Wl,'
-else
-  case "$host_os" in
-    aix*)
-      wl='-Wl,'
-      ;;
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      ;;
-    hpux9* | hpux10* | hpux11*)
-      wl='-Wl,'
-      ;;
-    irix5* | irix6* | nonstopux*)
-      wl='-Wl,'
-      ;;
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-        ecc*)
-          wl='-Wl,'
-          ;;
-        icc* | ifort*)
-          wl='-Wl,'
-          ;;
-        lf95*)
-          wl='-Wl,'
-          ;;
-        nagfor*)
-          wl='-Wl,-Wl,,'
-          ;;
-        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
-          wl='-Wl,'
-          ;;
-        ccc*)
-          wl='-Wl,'
-          ;;
-        xl* | bgxl* | bgf* | mpixl*)
-          wl='-Wl,'
-          ;;
-        como)
-          wl='-lopt='
-          ;;
-        *)
-          case `$CC -V 2>&1 | sed 5q` in
-            *Sun\ F* | *Sun*Fortran*)
-              wl=
-              ;;
-            *Sun\ C*)
-              wl='-Wl,'
-              ;;
-          esac
-          ;;
-      esac
-      ;;
-    newsos6)
-      ;;
-    *nto* | *qnx*)
-      ;;
-    osf3* | osf4* | osf5*)
-      wl='-Wl,'
-      ;;
-    rdos*)
-      ;;
-    solaris*)
-      case $cc_basename in
-        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
-          wl='-Qoption ld '
-          ;;
-        *)
-          wl='-Wl,'
-          ;;
-      esac
-      ;;
-    sunos4*)
-      wl='-Qoption ld '
-      ;;
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      wl='-Wl,'
-      ;;
-    sysv4*MP*)
-      ;;
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      wl='-Wl,'
-      ;;
-    unicos*)
-      wl='-Wl,'
-      ;;
-    uts4*)
-      ;;
-  esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # Set some defaults for GNU ld with shared library support. These
-  # are reset later if shared libraries are not supported. Putting them
-  # here allows them to be overridden if necessary.
-  # Unlike libtool, we use -rpath here, not --rpath, since the documented
-  # option of GNU ld is called -rpath, not --rpath.
-  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-  case "$host_os" in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-        ld_shlibs=no
-      fi
-      ;;
-    amigaos*)
-      case "$host_cpu" in
-        powerpc)
-          ;;
-        m68k)
-          hardcode_libdir_flag_spec='-L$libdir'
-          hardcode_minus_L=yes
-          ;;
-      esac
-      ;;
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    cygwin* | mingw* | pw32* | cegcc*)
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    haiku*)
-      ;;
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      ;;
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    netbsd*)
-      ;;
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-        ld_shlibs=no
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-          ld_shlibs=no
-          ;;
-        *)
-          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-          else
-            ld_shlibs=no
-          fi
-          ;;
-      esac
-      ;;
-    sunos4*)
-      hardcode_direct=yes
-      ;;
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-  esac
-  if test "$ld_shlibs" = no; then
-    hardcode_libdir_flag_spec=
-  fi
-else
-  case "$host_os" in
-    aix3*)
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        hardcode_direct=unsupported
-      fi
-      ;;
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-      else
-        aix_use_runtimelinking=no
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-          for ld_flag in $LDFLAGS; do
-            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-              aix_use_runtimelinking=yes
-              break
-            fi
-          done
-          ;;
-        esac
-      fi
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[012]|aix4.[012].*)
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" && \
-            strings "$collect2name" | grep resolve_lib_name >/dev/null
-          then
-            # We have reworked collect2
-            :
-          else
-            # We have old collect2
-            hardcode_direct=unsupported
-            hardcode_minus_L=yes
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_libdir_separator=
-          fi
-          ;;
-        esac
-      fi
-      # Begin _LT_AC_SYS_LIBPATH_AIX.
-      echo 'int main () { return 0; }' > conftest.c
-      ${CC} ${LDFLAGS} conftest.c -o conftest
-      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      if test -z "$aix_libpath"; then
-        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      fi
-      if test -z "$aix_libpath"; then
-        aix_libpath="/usr/lib:/lib"
-      fi
-      rm -f conftest.c conftest
-      # End _LT_AC_SYS_LIBPATH_AIX.
-      if test "$aix_use_runtimelinking" = yes; then
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-      else
-        if test "$host_cpu" = ia64; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-        else
-          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        fi
-      fi
-      ;;
-    amigaos*)
-      case "$host_cpu" in
-        powerpc)
-          ;;
-        m68k)
-          hardcode_libdir_flag_spec='-L$libdir'
-          hardcode_minus_L=yes
-          ;;
-      esac
-      ;;
-    bsdi[45]*)
-      ;;
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      libext=lib
-      ;;
-    darwin* | rhapsody*)
-      hardcode_direct=no
-      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    dgux*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    freebsd2.[01]*)
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    freebsd* | dragonfly*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    hpux9*)
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      ;;
-    hpux10*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        hardcode_direct=yes
-        # hardcode_minus_L: Not really in the search PATH,
-        # but as the default location of the library.
-        hardcode_minus_L=yes
-      fi
-      ;;
-    hpux11*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        case $host_cpu in
-          hppa*64*|ia64*)
-            hardcode_direct=no
-            ;;
-          *)
-            hardcode_direct=yes
-            # hardcode_minus_L: Not really in the search PATH,
-            # but as the default location of the library.
-            hardcode_minus_L=yes
-            ;;
-        esac
-      fi
-      ;;
-    irix5* | irix6* | nonstopux*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    netbsd*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    newsos6)
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    *nto* | *qnx*)
-      ;;
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-        hardcode_direct=yes
-        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        else
-          case "$host_os" in
-            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-              hardcode_libdir_flag_spec='-R$libdir'
-              ;;
-            *)
-              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-              ;;
-          esac
-        fi
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      ;;
-    osf3*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    osf4* | osf5*)
-      if test "$GCC" = yes; then
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-        # Both cc and cxx compiler support -rpath directly
-        hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
-    solaris*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      ;;
-    sunos4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    sysv4)
-      case $host_vendor in
-        sni)
-          hardcode_direct=yes # is this really true???
-          ;;
-        siemens)
-          hardcode_direct=no
-          ;;
-        motorola)
-          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-          ;;
-      esac
-      ;;
-    sysv4.3*)
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        ld_shlibs=yes
-      fi
-      ;;
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      ;;
-    sysv5* | sco3.2v5* | sco5v6*)
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator=':'
-      ;;
-    uts4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    *)
-      ld_shlibs=no
-      ;;
-  esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec=      # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
-  aix3*)
-    library_names_spec='$libname.a'
-    ;;
-  aix[4-9]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  amigaos*)
-    case "$host_cpu" in
-      powerpc*)
-        library_names_spec='$libname$shrext' ;;
-      m68k)
-        library_names_spec='$libname.a' ;;
-    esac
-    ;;
-  beos*)
-    library_names_spec='$libname$shrext'
-    ;;
-  bsdi[45]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  cygwin* | mingw* | pw32* | cegcc*)
-    shrext=.dll
-    library_names_spec='$libname.dll.a $libname.lib'
-    ;;
-  darwin* | rhapsody*)
-    shrext=.dylib
-    library_names_spec='$libname$shrext'
-    ;;
-  dgux*)
-    library_names_spec='$libname$shrext'
-    ;;
-  freebsd[23].*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  freebsd* | dragonfly*)
-    library_names_spec='$libname$shrext'
-    ;;
-  gnu*)
-    library_names_spec='$libname$shrext'
-    ;;
-  haiku*)
-    library_names_spec='$libname$shrext'
-    ;;
-  hpux9* | hpux10* | hpux11*)
-    case $host_cpu in
-      ia64*)
-        shrext=.so
-        ;;
-      hppa*64*)
-        shrext=.sl
-        ;;
-      *)
-        shrext=.sl
-        ;;
-    esac
-    library_names_spec='$libname$shrext'
-    ;;
-  interix[3-9]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  irix5* | irix6* | nonstopux*)
-    library_names_spec='$libname$shrext'
-    case "$host_os" in
-      irix5* | nonstopux*)
-        libsuff= shlibsuff=
-        ;;
-      *)
-        case $LD in
-          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
-          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
-          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
-          *) libsuff= shlibsuff= ;;
-        esac
-        ;;
-    esac
-    ;;
-  linux*oldld* | linux*aout* | linux*coff*)
-    ;;
-  linux* | k*bsd*-gnu | kopensolaris*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  knetbsd*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  netbsd*)
-    library_names_spec='$libname$shrext'
-    ;;
-  newsos6)
-    library_names_spec='$libname$shrext'
-    ;;
-  *nto* | *qnx*)
-    library_names_spec='$libname$shrext'
-    ;;
-  openbsd*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  os2*)
-    libname_spec='$name'
-    shrext=.dll
-    library_names_spec='$libname.a'
-    ;;
-  osf3* | osf4* | osf5*)
-    library_names_spec='$libname$shrext'
-    ;;
-  rdos*)
-    ;;
-  solaris*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sunos4*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  sysv4 | sysv4.3*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv4*MP*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-    library_names_spec='$libname$shrext'
-    ;;
-  tpf*)
-    library_names_spec='$libname$shrext'
-    ;;
-  uts4*)
-    library_names_spec='$libname$shrext'
-    ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF

config/install-sh

@@ -1,501 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2016-01-11.22; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-tab='	'
-nl='
-'
-IFS=" $tab$nl"
-
-# Set DOITPROG to "echo" to test this script.
-
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-is_target_a_directory=possibly
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-
-    -o) chowncmd="$chownprog $2"
-        shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t)
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
-        shift;;
-
-    -T) is_target_a_directory=never;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --) shift
-        break;;
-
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      dstdir=`dirname "$dst"`
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # Create intermediate dirs using mode 755 as modified by the umask.
-        # This is like FreeBSD 'install' as of 1997-10-28.
-        umask=`umask`
-        case $stripcmd.$umask in
-          # Optimize common cases.
-          *[2367][2367]) mkdir_umask=$umask;;
-          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-          *[0-7])
-            mkdir_umask=`expr $umask + 22 \
-              - $umask % 100 % 40 + $umask % 20 \
-              - $umask % 10 % 4 + $umask % 2
-            `;;
-          *) mkdir_umask=$umask,go-w;;
-        esac
-
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-
-        posix_mkdir=false
-        case $umask in
-          *[123567][0-7][0-7])
-            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-            ;;
-          *)
-            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-            if (umask $mkdir_umask &&
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-            then
-              if test -z "$dir_arg" || {
-                   # Check for POSIX incompatibilities with -m.
-                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writable bit of parent directory when it shouldn't.
-                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-                   case $ls_ld_tmpdir in
-                     d????-?r-*) different_mode=700;;
-                     d????-?--*) different_mode=755;;
-                     *) false;;
-                   esac &&
-                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-                   }
-                 }
-              then posix_mkdir=:
-              fi
-              rmdir "$tmpdir/d" "$tmpdir"
-            else
-              # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-            fi
-            trap '' 0;;
-        esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-        /*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
-        *)  prefix='';;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      set -f
-      set fnord $dstdir
-      shift
-      set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-        test X"$d" = X && continue
-
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask=$mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-       set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd -f "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

config/missing

@@ -1,215 +0,0 @@
-#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
-
-scriptversion=2016-01-11.22; # UTC
-
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try '$0 --help' for more information"
-  exit 1
-fi
-
-case $1 in
-
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
-
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  bison     yacc      flex         lex       help2man
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: unknown '$1' option"
-    echo 1>&2 "Try '$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
-
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  case $normalized_program in
-    autoconf*)
-      echo "You should only need it if you modified 'configure.ac',"
-      echo "or m4 files included by it."
-      program_details 'autoconf'
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

configure.ac

@@ -1,98 +0,0 @@
-AC_PREREQ(2.63)
-AC_INIT([gnome-shell-extensions],[3.26.2],[https://bugzilla.gnome.org/enter_bug.cgi?product=gnome-shell&component=extensions])
-
-AC_CONFIG_MACRO_DIR([m4])
-AC_CONFIG_AUX_DIR([config])
-
-AM_INIT_AUTOMAKE([1.10 dist-xz no-dist-gzip foreign tar-ustar])
-
-m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
-
-GETTEXT_PACKAGE=gnome-shell-extensions
-AC_SUBST(GETTEXT_PACKAGE)
-AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE",
-                   [The prefix for our gettext translation domains.])
-
-AM_GNU_GETTEXT_VERSION([0.19.6])
-AM_GNU_GETTEXT([external])
-
-PKG_PROG_PKG_CONFIG([0.22])
-
-GLIB_GSETTINGS
-
-SHELL_VERSION="$PACKAGE_VERSION"
-shell_major=`echo "$PACKAGE_VERSION" | cut -d'.' -f1`
-shell_minor=`echo "$PACKAGE_VERSION" | cut -d'.' -f2`
-if test "$(($shell_minor % 2))" -eq 0; then
-	SHELL_VERSION="$shell_major.$shell_minor"
-fi
-AC_SUBST([SHELL_VERSION])
-
-dnl keep this in alphabetic order
-CLASSIC_EXTENSIONS="apps-menu places-menu alternate-tab launch-new-instance window-list"
-DEFAULT_EXTENSIONS="$CLASSIC_EXTENSIONS drive-menu screenshot-window-sizer windowsNavigator workspace-indicator"
-ALL_EXTENSIONS="$DEFAULT_EXTENSIONS auto-move-windows example native-window-placement user-theme"
-AC_SUBST(CLASSIC_EXTENSIONS, [$CLASSIC_EXTENSIONS])
-AC_SUBST(ALL_EXTENSIONS, [$ALL_EXTENSIONS])
-AC_ARG_ENABLE([extensions],
-	[AS_HELP_STRING([--enable-extensions],[Space separated list of extensions to enable.
-	The default is to build and distribute all extensions that can be installed in the home directory and have no external depedencies.
-	Use "all" to enable all available extensions, or "classic-mode" to enable extensions that restore GNOME 2 functionality.])],
-	[],
-	[enable_extensions=$DEFAULT_EXTENSIONS]
-)
-
-if test x"$enable_extensions" = xall; then
-   enable_extensions="$ALL_EXTENSIONS"
-   enable_classic_mode_default=yes
-elif test x"$enable_extensions" = xclassic-mode; then
-   enable_extensions="$CLASSIC_EXTENSIONS"
-   enable_classic_mode_default=yes
-else
-   enable_classic_mode_default=no
-fi
-
-AC_ARG_ENABLE([classic-mode],
-        [AS_HELP_STRING([--enable-classic-mode],[Enable installing data files for classic mode.
-        Defaults to yes if enabling all or classic-mode extensions, and no otherwise.])],
-        [],
-        [enable_classic_mode=$enable_classic_mode_default])
-AM_CONDITIONAL([CLASSIC_MODE], [test x"$enable_classic_mode" != xno])
-
-ENABLED_EXTENSIONS=
-for e in $enable_extensions; do
-	case $e in
-dnl		keep this in alphabetic order
-		alternate-tab|apps-menu|auto-move-windows|drive-menu|example|launch-new-instance|native-window-placement|places-menu|screenshot-window-sizer|user-theme|window-list|windowsNavigator|workspace-indicator)
-			ENABLED_EXTENSIONS="$ENABLED_EXTENSIONS $e"
-			;;
-		*)
-			AC_MSG_ERROR([invalid extension $e])
-	esac
-done
-
-AC_SUBST(ENABLED_EXTENSIONS, [$ENABLED_EXTENSIONS])
-
-AC_PATH_PROG([SASSC],[sassc],[])
-
-dnl Please keep this sorted alphabetically
-AC_CONFIG_FILES([
-  data/Makefile
-  extensions/alternate-tab/Makefile
-  extensions/apps-menu/Makefile
-  extensions/auto-move-windows/Makefile
-  extensions/drive-menu/Makefile
-  extensions/example/Makefile
-  extensions/launch-new-instance/Makefile
-  extensions/native-window-placement/Makefile
-  extensions/places-menu/Makefile
-  extensions/screenshot-window-sizer/Makefile
-  extensions/user-theme/Makefile
-  extensions/window-list/Makefile
-  extensions/windowsNavigator/Makefile
-  extensions/workspace-indicator/Makefile
-  extensions/Makefile
-  Makefile
-  po/Makefile.in
-])
-AC_OUTPUT

data/00_org.gnome.shell.extensions.classic.gschema.override

@@ -0,0 +1,9 @@
+[org.gnome.mutter:GNOME-Classic]
+dynamic-workspaces=false
+
+[org.gnome.desktop.wm.preferences:GNOME-Classic]
+button-layout='appmenu:minimize,maximize,close'
+
+[org.gnome.desktop.wm.keybindings:GNOME-Classic]
+switch-applications=[]
+switch-windows=['<Super>Tab','<Alt>Tab']

data/HACKING

@@ -0,0 +1,2 @@
+To update the gnome-shell-sass submodule to latest upstream commit:
+git submodule update --rebase

data/Makefile.am

@@ -1,73 +0,0 @@
-include $(top_srcdir)/include.mk
-
-sessiondir = $(datadir)/gnome-session/sessions
-session_in_files = gnome-classic.session.desktop.in
-session_DATA = $(session_in_files:.session.desktop.in=.session)
-
-xsessiondir = $(datadir)/xsessions
-xsession_in_files = gnome-classic.desktop.in
-xsession_DATA = $(xsession_in_files:.desktop.in=.desktop)
-
-modedir = $(datadir)/gnome-shell/modes
-mode_in_files = classic.json.in
-mode_DATA = $(mode_in_files:.json.in=.json)
-
-themedir = $(datadir)/gnome-shell/theme
-theme_DATA = 				\
-	$(srcdir)/calendar-today.svg		\
-	$(srcdir)/classic-process-working.svg		\
-	$(srcdir)/classic-toggle-off-intl.svg		\
-	$(srcdir)/classic-toggle-off-us.svg		\
-	$(srcdir)/classic-toggle-on-intl.svg		\
-	$(srcdir)/classic-toggle-on-us.svg		\
-	$(srcdir)/gnome-classic.css			\
-	$(srcdir)/gnome-classic-high-contrast.css	\
-	$(NULL)
-
-theme_sources =							\
-	$(srcdir)/gnome-classic.scss				\
-	$(srcdir)/gnome-shell-sass/_colors.scss			\
-	$(srcdir)/gnome-shell-sass/_common.scss			\
-	$(srcdir)/gnome-shell-sass/_drawing.scss		\
-	$(srcdir)/gnome-shell-sass/_high-contrast-colors.scss	\
-	$(NULL)
-
-%.css: %.scss $(theme_sources)
-	@if test -n "$(SASSC)"; then \
-		if $(AM_V_P); then PS4= set -x; else echo "  GEN      $@"; fi; \
-		$(SASSC) -a $< $@; \
-	fi
-
-gsettings_SCHEMAS = org.gnome.shell.extensions.classic-overrides.gschema.xml
-
-@GSETTINGS_RULES@
-
-%.desktop:%.desktop.in
-	$(AM_V_GEN) $(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
-
-%.session: %.session.desktop.in
-	$(AM_V_GEN) $(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
-
-comma:=,
-empty:=
-space:= $(empty) $(empty)
-extensions:=$(patsubst %,\"%$(extensionbase)\",$(CLASSIC_EXTENSIONS))
-extension_list:=$(subst $(space),$(comma),$(extensions))
-%.json:%.json.in
-	$(AM_V_GEN) sed \
-		-e "s|\@CLASSIC_EXTENSIONS\@|$(extension_list)|g" \
-		$< > $@
-
-EXTRA_DIST = \
-	$(session_in_files) \
-	$(xsession_in_files) \
-	$(mode_in_files) \
-	$(gsettings_SCHEMAS) \
-	$(theme_DATA) \
-	$(NULL)
-
-CLEANFILES = \
-	$(session_DATA) \
-	$(xsession_DATA) \
-	$(mode_DATA) \
-	$(NULL)

data/Makefile.in

@@ -1,639 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = data
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(modedir)" "$(DESTDIR)$(sessiondir)" \
-	"$(DESTDIR)$(themedir)" "$(DESTDIR)$(xsessiondir)"
-DATA = $(mode_DATA) $(session_DATA) $(theme_DATA) $(xsession_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/include.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-extensionurl = http://git.gnome.org/gnome-shell-extensions
-
-# Change these to modify how installation is performed
-topextensiondir = $(datadir)/gnome-shell/extensions
-extensionbase = @gnome-shell-extensions.gcampax.github.com
-gschemabase = org.gnome.shell.extensions
-uuid = $(EXTENSION_ID)$(extensionbase)
-gschemaname = $(gschemabase).$(EXTENSION_ID)
-extensiondir = $(topextensiondir)/$(uuid)
-sessiondir = $(datadir)/gnome-session/sessions
-session_in_files = gnome-classic.session.desktop.in
-session_DATA = $(session_in_files:.session.desktop.in=.session)
-xsessiondir = $(datadir)/xsessions
-xsession_in_files = gnome-classic.desktop.in
-xsession_DATA = $(xsession_in_files:.desktop.in=.desktop)
-modedir = $(datadir)/gnome-shell/modes
-mode_in_files = classic.json.in
-mode_DATA = $(mode_in_files:.json.in=.json)
-themedir = $(datadir)/gnome-shell/theme
-theme_DATA = \
-	$(srcdir)/calendar-today.svg		\
-	$(srcdir)/classic-process-working.svg		\
-	$(srcdir)/classic-toggle-off-intl.svg		\
-	$(srcdir)/classic-toggle-off-us.svg		\
-	$(srcdir)/classic-toggle-on-intl.svg		\
-	$(srcdir)/classic-toggle-on-us.svg		\
-	$(srcdir)/gnome-classic.css			\
-	$(srcdir)/gnome-classic-high-contrast.css	\
-	$(NULL)
-
-theme_sources = \
-	$(srcdir)/gnome-classic.scss				\
-	$(srcdir)/gnome-shell-sass/_colors.scss			\
-	$(srcdir)/gnome-shell-sass/_common.scss			\
-	$(srcdir)/gnome-shell-sass/_drawing.scss		\
-	$(srcdir)/gnome-shell-sass/_high-contrast-colors.scss	\
-	$(NULL)
-
-gsettings_SCHEMAS = org.gnome.shell.extensions.classic-overrides.gschema.xml
-comma := ,
-empty := 
-space := $(empty) $(empty)
-extensions := $(patsubst %,\"%$(extensionbase)\",$(CLASSIC_EXTENSIONS))
-extension_list := $(subst $(space),$(comma),$(extensions))
-EXTRA_DIST = \
-	$(session_in_files) \
-	$(xsession_in_files) \
-	$(mode_in_files) \
-	$(gsettings_SCHEMAS) \
-	$(theme_DATA) \
-	$(NULL)
-
-CLEANFILES = \
-	$(session_DATA) \
-	$(xsession_DATA) \
-	$(mode_DATA) \
-	$(NULL)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/include.mk $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign data/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/include.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-modeDATA: $(mode_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(mode_DATA)'; test -n "$(modedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(modedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(modedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(modedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(modedir)" || exit $$?; \
-	done
-
-uninstall-modeDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(mode_DATA)'; test -n "$(modedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(modedir)'; $(am__uninstall_files_from_dir)
-install-sessionDATA: $(session_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(session_DATA)'; test -n "$(sessiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sessiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sessiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sessiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sessiondir)" || exit $$?; \
-	done
-
-uninstall-sessionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(session_DATA)'; test -n "$(sessiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(sessiondir)'; $(am__uninstall_files_from_dir)
-install-themeDATA: $(theme_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(theme_DATA)'; test -n "$(themedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(themedir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(themedir)" || exit $$?; \
-	done
-
-uninstall-themeDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(theme_DATA)'; test -n "$(themedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
-install-xsessionDATA: $(xsession_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(xsession_DATA)'; test -n "$(xsessiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(xsessiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(xsessiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xsessiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(xsessiondir)" || exit $$?; \
-	done
-
-uninstall-xsessionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(xsession_DATA)'; test -n "$(xsessiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(xsessiondir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(modedir)" "$(DESTDIR)$(sessiondir)" "$(DESTDIR)$(themedir)" "$(DESTDIR)$(xsessiondir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-modeDATA install-sessionDATA \
-	install-themeDATA install-xsessionDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-modeDATA uninstall-sessionDATA \
-	uninstall-themeDATA uninstall-xsessionDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-modeDATA install-pdf \
-	install-pdf-am install-ps install-ps-am install-sessionDATA \
-	install-strip install-themeDATA install-xsessionDATA \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-modeDATA uninstall-sessionDATA uninstall-themeDATA \
-	uninstall-xsessionDATA
-
-.PRECIOUS: Makefile
-
-
-%.css: %.scss $(theme_sources)
-	@if test -n "$(SASSC)"; then \
-		if $(AM_V_P); then PS4= set -x; else echo "  GEN      $@"; fi; \
-		$(SASSC) -a $< $@; \
-	fi
-
-@GSETTINGS_RULES@
-
-%.desktop:%.desktop.in
-	$(AM_V_GEN) $(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
-
-%.session: %.session.desktop.in
-	$(AM_V_GEN) $(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
-%.json:%.json.in
-	$(AM_V_GEN) sed \
-		-e "s|\@CLASSIC_EXTENSIONS\@|$(extension_list)|g" \
-		$< > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

data/calendar-today.svg

@@ -1,178 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="24"
-   height="24"
-   id="svg10621"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="calendar-today.svg">
-  <defs
-     id="defs10623">
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient99561-1"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient34508-1-3">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop34510-1-9" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop34512-4-5" />
-    </linearGradient>
-    <radialGradient
-       r="42"
-       fy="30"
-       fx="51"
-       cy="30"
-       cx="51"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       gradientUnits="userSpaceOnUse"
-       id="radialGradient10592"
-       xlink:href="#linearGradient34508-1-3"
-       inkscape:collect="always" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient3770"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient3001"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient3007"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient3067"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient3072"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34508-1-3"
-       id="radialGradient2997"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.72146227,0,0,0.27484277,14.205424,21.754717)"
-       cx="51"
-       cy="30"
-       fx="51"
-       fy="30"
-       r="42" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#d3d3d3"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="8"
-     inkscape:cx="-55.349829"
-     inkscape:cy="-31.442864"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="2133"
-     inkscape:window-height="1241"
-     inkscape:window-x="238"
-     inkscape:window-y="89"
-     inkscape:window-maximized="0"
-     borderlayer="true"
-     inkscape:showpageshadow="false">
-    <inkscape:grid
-       type="xygrid"
-       id="grid3109"
-       empspacing="5"
-       visible="true"
-       enabled="true"
-       snapvisiblegridlinesonly="true" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata10626">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-469.08263,-537.99307)">
-    <circle
-       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#555753;fill-opacity:0.23756906;fill-rule:nonzero;stroke:none;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-       id="path7305"
-       cx="481.57138"
-       cy="559.4649"
-       r="1.5" />
-  </g>
-</svg>

data/classic-toggle-off-intl.svg

@@ -1,262 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="65"
-   height="22"
-   id="svg10865"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="classic-toggle-off-intl.svg">
-  <defs
-     id="defs10867">
-    <linearGradient
-       id="linearGradient62852-6-5">
-      <stop
-         id="stop62854-6-7"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0" />
-      <stop
-         id="stop62860-5-3"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0"
-       effect="spiro" />
-    <linearGradient
-       id="linearGradient62821-5-8">
-      <stop
-         id="stop62823-2-4"
-         offset="0"
-         style="stop-color:#d1d3d1;stop-opacity:1;" />
-      <stop
-         id="stop62825-3-8"
-         offset="1"
-         style="stop-color:#ebebeb;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient62852-6-5-3">
-      <stop
-         id="stop62854-6-7-6"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0-3" />
-      <stop
-         id="stop62860-5-3-9"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       effect="spiro"
-       id="path-effect62829-6-8-0"
-       is_visible="true" />
-    <linearGradient
-       id="linearGradient62821-5-8-1">
-      <stop
-         id="stop62823-2-4-2"
-         offset="0"
-         style="stop-color:#d1d3d1;stop-opacity:1;" />
-      <stop
-         id="stop62825-3-8-9"
-         offset="1"
-         style="stop-color:#ebebeb;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       y2="507.42715"
-       x2="702.58966"
-       y1="484.49405"
-       x1="702.58966"
-       gradientTransform="matrix(1.3066667,0,0,1,-841.64667,-483)"
-       gradientUnits="userSpaceOnUse"
-       id="linearGradient11647"
-       xlink:href="#linearGradient62821-5-8-1"
-       inkscape:collect="always" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath65663">
-      <rect
-         style="color:#000000;display:inline;overflow:visible;visibility:visible;fill:#729fcf;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:1;marker:none;enable-background:new"
-         id="rect65665"
-         width="96.999924"
-         height="24.292892"
-         x="708.71954"
-         y="406.96973"
-         rx="3.1139846"
-         ry="1.9595497"
-         inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/content selection/content-selection.png"
-         inkscape:export-xdpi="90"
-         inkscape:export-ydpi="90" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient5378-2-5-9-9-0-80-7-6-8-4-5-7-3-6-2-9"
-       id="linearGradient65582"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.5250827,0,0,0.72144839,620.16092,156.4917)"
-       x1="207.17195"
-       y1="497.39584"
-       x2="207.17195"
-       y2="531.48669" />
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient5378-2-5-9-9-0-80-7-6-8-4-5-7-3-6-2-9">
-      <stop
-         style="stop-color:#f4f6f4;stop-opacity:1"
-         offset="0"
-         id="stop5380-6-1-1-9-3-6-3-6-45-6-4-4-9-9-8-9" />
-      <stop
-         style="stop-color:#d7dad7;stop-opacity:1"
-         offset="1"
-         id="stop5382-06-3-6-4-2-4-6-8-0-9-6-8-7-7-6-7" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient65584">
-      <stop
-         style="stop-color:#f1f1f1;stop-opacity:1"
-         offset="0"
-         id="stop65586" />
-      <stop
-         style="stop-color:#a7aba7;stop-opacity:0;"
-         offset="1"
-         id="stop65588" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient5378-2-5-9-9-0-80-7-6-8-4-5-7-3-6-2-9"
-       id="linearGradient65582-5"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.5250827,0,0,0.72144839,-75.348673,-359.16458)"
-       x1="207.17195"
-       y1="497.39584"
-       x2="207.17195"
-       y2="531.48669" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient65584"
-       id="linearGradient65590-6"
-       x1="716.62506"
-       y1="537.23358"
-       x2="716.62506"
-       y2="535.23358"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.0139469,0,0,1.0139469,-705.52354,-521.99915)" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="23.565368"
-     inkscape:cy="19.596892"
-     inkscape:document-units="px"
-     inkscape:current-layer="g62929"
-     showgrid="false"
-     borderlayer="true"
-     inkscape:showpageshadow="false"
-     inkscape:snap-nodes="false"
-     inkscape:snap-bbox="true"
-     inkscape:bbox-paths="true"
-     inkscape:snap-others="false"
-     inkscape:window-width="2560"
-     inkscape:window-height="1342"
-     inkscape:window-x="0"
-     inkscape:window-y="28"
-     inkscape:window-maximized="1"
-     showborder="false">
-    <inkscape:grid
-       type="xygrid"
-       id="grid11512" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata10870">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(0,-1030.3622)">
-    <g
-       inkscape:export-ydpi="90"
-       inkscape:export-xdpi="90"
-       inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/system-settings/network/network-panel-summary.png"
-       style="display:inline"
-       id="g62929"
-       transform="translate(-643.91421,517.29894)">
-      <g
-         transform="translate(0,30)"
-         id="g62931">
-        <rect
-           style="fill:#cecece;fill-opacity:1;stroke:#a7a7a7;stroke-width:1;stroke-linecap:butt;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;color:#000000;color-interpolation:sRGB;color-interpolation-filters:linearRGB;fill-rule:nonzero;stroke-linejoin:miter;stroke-dashoffset:0;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:new;clip-rule:nonzero;opacity:1;isolation:auto;mix-blend-mode:normal;solid-color:#000000;solid-opacity:1;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;filter-blend-mode:normal;filter-gaussianBlur-deviation:0;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto"
-           id="rect62935"
-           width="63.856125"
-           height="21.093594"
-           x="644.5"
-           y="483.5"
-           rx="2"
-           ry="2" />
-        <rect
-           style="fill:url(#linearGradient65582);fill-opacity:1;stroke:#a7a7a7;stroke-width:0.97313344;stroke-linecap:butt;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;display:inline;color:#000000;clip-rule:nonzero;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill-rule:nonzero;stroke-linejoin:miter;stroke-dashoffset:0;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;filter-blend-mode:normal;filter-gaussianBlur-deviation:0;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-           id="rect62937"
-           width="29.97398"
-           height="17.022524"
-           x="646.55896"
-           y="485.61429"
-           rx="1"
-           ry="1" />
-        <g
-           transform="translate(-38.048674,-1.9445437)"
-           id="g62939" />
-        <path
-           inkscape:connector-curvature="0"
-           inkscape:original-d="m 647.78241,486.57192 27.73523,0"
-           inkscape:path-effect="#path-effect62989-8-0"
-           id="path62947"
-           d="m 647.78241,486.57192 27.73523,0"
-           style="fill:none;stroke:#ffffff;stroke-width:1px;stroke-linecap:round;stroke-linejoin:miter;stroke-opacity:1" />
-      </g>
-      <g
-         id="g11665"
-         transform="matrix(0.78906097,0,0,0.78906097,178.78814,111.57844)" />
-      <path
-         sodipodi:type="arc"
-         id="path3016"
-         sodipodi:cx="50.375"
-         sodipodi:cy="11.875"
-         sodipodi:rx="4.625"
-         sodipodi:ry="4.625"
-         d="M 55,11.875 A 4.625,4.625 0 0 1 50.375,16.5 4.625,4.625 0 0 1 45.75,11.875 4.625,4.625 0 0 1 50.375,7.25 4.625,4.625 0 0 1 55,11.875 Z"
-         transform="translate(642.41421,512.02037)"
-         style="fill:none;stroke:#2e3436;stroke-width:2;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" />
-    </g>
-  </g>
-</svg>

data/classic-toggle-off-us.svg

@@ -1,222 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="65"
-   height="22"
-   id="svg10865"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="classic-toggle-off-us.svg">
-  <defs
-     id="defs10867">
-    <linearGradient
-       id="linearGradient62852-6-5">
-      <stop
-         id="stop62854-6-7"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0" />
-      <stop
-         id="stop62860-5-3"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0"
-       effect="spiro" />
-    <linearGradient
-       id="linearGradient62821-5-8">
-      <stop
-         id="stop62823-2-4"
-         offset="0"
-         style="stop-color:#d1d3d1;stop-opacity:1;" />
-      <stop
-         id="stop62825-3-8"
-         offset="1"
-         style="stop-color:#ebebeb;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient62852-6-5-3">
-      <stop
-         id="stop62854-6-7-6"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0-3" />
-      <stop
-         id="stop62860-5-3-9"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       effect="spiro"
-       id="path-effect62829-6-8-0"
-       is_visible="true" />
-    <linearGradient
-       id="linearGradient62821-5-8-1">
-      <stop
-         id="stop62823-2-4-2"
-         offset="0"
-         style="stop-color:#d1d3d1;stop-opacity:1;" />
-      <stop
-         id="stop62825-3-8-9"
-         offset="1"
-         style="stop-color:#ebebeb;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       y2="507.42715"
-       x2="702.58966"
-       y1="484.49405"
-       x1="702.58966"
-       gradientTransform="matrix(1.3066667,0,0,1,-841.64667,-483)"
-       gradientUnits="userSpaceOnUse"
-       id="linearGradient11647"
-       xlink:href="#linearGradient62821-5-8-1"
-       inkscape:collect="always" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient5378-2-5-9-9-0-80-7-6-8-4-5-7-3-6-2-9"
-       id="linearGradient65582"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.5250827,0,0,0.72144839,620.16092,156.4917)"
-       x1="207.17195"
-       y1="497.39584"
-       x2="207.17195"
-       y2="531.48669" />
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient5378-2-5-9-9-0-80-7-6-8-4-5-7-3-6-2-9">
-      <stop
-         style="stop-color:#f4f6f4;stop-opacity:1"
-         offset="0"
-         id="stop5380-6-1-1-9-3-6-3-6-45-6-4-4-9-9-8-9" />
-      <stop
-         style="stop-color:#d7dad7;stop-opacity:1"
-         offset="1"
-         id="stop5382-06-3-6-4-2-4-6-8-0-9-6-8-7-7-6-7" />
-    </linearGradient>
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0-6"
-       effect="spiro" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="78.222729"
-     inkscape:cy="-3.6620078"
-     inkscape:document-units="px"
-     inkscape:current-layer="g62929"
-     showgrid="false"
-     borderlayer="true"
-     inkscape:showpageshadow="false"
-     inkscape:snap-nodes="false"
-     inkscape:snap-bbox="true"
-     inkscape:bbox-paths="true"
-     inkscape:snap-others="false"
-     inkscape:window-width="2560"
-     inkscape:window-height="1342"
-     inkscape:window-x="0"
-     inkscape:window-y="28"
-     inkscape:window-maximized="1"
-     showborder="false">
-    <inkscape:grid
-       type="xygrid"
-       id="grid11512" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata10870">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(0,-1030.3622)">
-    <g
-       inkscape:export-ydpi="90"
-       inkscape:export-xdpi="90"
-       inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/system-settings/network/network-panel-summary.png"
-       style="display:inline"
-       id="g62929"
-       transform="translate(-643.91421,517.29894)">
-      <g
-         style="display:inline"
-         transform="translate(0,30)"
-         id="g62931">
-        <rect
-           style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#cecece;fill-opacity:1;fill-rule:nonzero;stroke:#a7a7a7;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:new"
-           id="rect62935"
-           width="63.856125"
-           height="21.093594"
-           x="644.5"
-           y="483.5"
-           rx="2"
-           ry="2" />
-        <rect
-           style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:url(#linearGradient65582);fill-opacity:1;fill-rule:nonzero;stroke:#a7a7a7;stroke-width:0.97313344;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-           id="rect62937"
-           width="29.97398"
-           height="17.022524"
-           x="646.55896"
-           y="485.61429"
-           rx="1"
-           ry="1" />
-        <g
-           transform="translate(-38.048674,-1.9445437)"
-           id="g62939" />
-        <path
-           inkscape:connector-curvature="0"
-           inkscape:original-d="m 647.78241,486.57192 27.73523,0"
-           inkscape:path-effect="#path-effect62989-8-0-6"
-           id="path62947"
-           d="m 647.78241,486.57192 27.73523,0"
-           style="fill:none;stroke:#ffffff;stroke-width:1px;stroke-linecap:round;stroke-linejoin:miter;stroke-opacity:1" />
-      </g>
-      <g
-         id="g11665"
-         transform="matrix(0.78906097,0,0,0.78906097,167.78814,111.57844)">
-        <text
-           xml:space="preserve"
-           style="font-size:12.69556618px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#2e3436;fill-opacity:1;stroke:none;font-family:Cantarell;-inkscape-font-specification:Cantarell Bold"
-           x="644.46393"
-           y="533.87158"
-           id="text62949"
-           sodipodi:linespacing="125%"
-           transform="scale(1.0113976,0.98873084)"><tspan
-             sodipodi:role="line"
-             id="tspan62951"
-             x="644.46393"
-             y="533.87158">OFF</tspan></text>
-      </g>
-    </g>
-  </g>
-</svg>

data/classic-toggle-on-intl.svg

@@ -1,175 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="65"
-   height="22"
-   id="svg10865"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="classic-toggle-on-intl.svg">
-  <defs
-     id="defs10867">
-    <linearGradient
-       id="linearGradient62852-6-5">
-      <stop
-         id="stop62854-6-7"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0" />
-      <stop
-         id="stop62860-5-3"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0"
-       effect="spiro" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient38513"
-       id="linearGradient38519"
-       x1="690"
-       y1="506.25049"
-       x2="690"
-       y2="480.93414"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient38513">
-      <stop
-         style="stop-color:#729fcf;stop-opacity:1"
-         offset="0"
-         id="stop38515" />
-      <stop
-         style="stop-color:#6f9ccd;stop-opacity:1"
-         offset="1"
-         id="stop38517" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient62852-6-5"
-       id="linearGradient62981-1-1"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.85639946,0,0,0.81059641,57.747905,92.132229)"
-       x1="740"
-       y1="486.10501"
-       x2="740"
-       y2="505.3204" />
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0-8"
-       effect="spiro" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="9.3225163"
-     inkscape:cy="-0.1588306"
-     inkscape:document-units="px"
-     inkscape:current-layer="g62929"
-     showgrid="false"
-     borderlayer="true"
-     inkscape:showpageshadow="false"
-     inkscape:snap-nodes="false"
-     inkscape:snap-bbox="true"
-     inkscape:bbox-paths="true"
-     inkscape:snap-others="false"
-     inkscape:window-width="2560"
-     inkscape:window-height="1342"
-     inkscape:window-x="0"
-     inkscape:window-y="28"
-     inkscape:window-maximized="1"
-     showborder="false">
-    <inkscape:grid
-       type="xygrid"
-       id="grid11512" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata10870">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(0,-1030.3622)">
-    <g
-       inkscape:export-ydpi="90"
-       inkscape:export-xdpi="90"
-       inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/system-settings/network/network-panel-summary.png"
-       style="display:inline"
-       id="g62929"
-       transform="translate(-643.91421,517.29894)">
-      <g
-         style="display:inline"
-         transform="translate(0,30)"
-         id="g62931">
-        <rect
-           style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:url(#linearGradient38519);fill-opacity:1;fill-rule:nonzero;stroke:#3465a4;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-           id="rect62935"
-           width="63.856125"
-           height="21.093594"
-           x="644.5"
-           y="483.5"
-           rx="2"
-           ry="2" />
-        <rect
-           style="display:inline;fill:url(#linearGradient62981-1-1);fill-opacity:1;stroke:#3465a4;stroke-width:1;stroke-linecap:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-           id="rect62937"
-           width="29.97398"
-           height="17.022524"
-           x="676.49646"
-           y="485.67679"
-           rx="1"
-           ry="1" />
-        <g
-           transform="translate(-7.9861743,-1.9445437)"
-           id="g62939" />
-        <path
-           inkscape:connector-curvature="0"
-           inkscape:original-d="m 677.59874,486.57192 27.94632,0"
-           inkscape:path-effect="#path-effect62989-8-0-8"
-           id="path62947"
-           d="m 677.59874,486.57192 27.94632,0"
-           style="fill:none;stroke:#ffffff;stroke-width:1px;stroke-linecap:round;stroke-linejoin:miter;stroke-opacity:1" />
-      </g>
-      <path
-         inkscape:connector-curvature="0"
-         id="path4444"
-         d="m 661.91421,522.09451 0,7"
-         style="fill:#3465a4;stroke:#3465a4;stroke-width:2;stroke-linecap:square;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;color:#000000;fill-opacity:1;fill-rule:nonzero;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <path
-         style="fill:none;stroke:#ffffff;stroke-width:2;stroke-linecap:square;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-         d="m 18,7.96875 0,7"
-         id="path3922"
-         inkscape:connector-curvature="0"
-         transform="translate(643.91421,513.06326)" />
-    </g>
-  </g>
-</svg>

data/classic-toggle-on-us.svg

@@ -1,209 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="65"
-   height="22"
-   id="svg10865"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="classic-toggle-on-us.svg">
-  <defs
-     id="defs10867">
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient62852-6-5"
-       id="linearGradient62981-1-1"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(0.85639946,0,0,0.81059641,57.747905,92.132229)"
-       x1="740"
-       y1="486.10501"
-       x2="740"
-       y2="505.3204" />
-    <linearGradient
-       id="linearGradient62852-6-5">
-      <stop
-         id="stop62854-6-7"
-         offset="0"
-         style="stop-color:#ffffff;stop-opacity:1" />
-      <stop
-         style="stop-color:#eeeeec;stop-opacity:1"
-         offset="0.97726452"
-         id="stop62858-8-0" />
-      <stop
-         id="stop62860-5-3"
-         offset="1"
-         style="stop-color:#f5f5f4;stop-opacity:1" />
-    </linearGradient>
-    <inkscape:path-effect
-       is_visible="true"
-       id="path-effect62989-8-0"
-       effect="spiro" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath65663">
-      <rect
-         style="color:#000000;display:inline;overflow:visible;visibility:visible;fill:#729fcf;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:1;marker:none;enable-background:new"
-         id="rect65665"
-         width="96.999924"
-         height="24.292892"
-         x="708.71954"
-         y="406.96973"
-         rx="3.1139846"
-         ry="1.9595497"
-         inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/content selection/content-selection.png"
-         inkscape:export-xdpi="90"
-         inkscape:export-ydpi="90" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient38513"
-       id="linearGradient38519"
-       x1="690"
-       y1="506.25049"
-       x2="690"
-       y2="480.93414"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient38513">
-      <stop
-         style="stop-color:#729fcf;stop-opacity:1"
-         offset="0"
-         id="stop38515" />
-      <stop
-         style="stop-color:#6f9ccd;stop-opacity:1"
-         offset="1"
-         id="stop38517" />
-    </linearGradient>
-    <linearGradient
-       gradientTransform="translate(-644,-483)"
-       inkscape:collect="always"
-       xlink:href="#linearGradient38513"
-       id="linearGradient38519-3"
-       x1="690"
-       y1="506.25049"
-       x2="690"
-       y2="480.93414"
-       gradientUnits="userSpaceOnUse" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="20.775745"
-     inkscape:cy="7.0434022"
-     inkscape:document-units="px"
-     inkscape:current-layer="g62929"
-     showgrid="false"
-     borderlayer="true"
-     inkscape:showpageshadow="false"
-     inkscape:snap-nodes="false"
-     inkscape:snap-bbox="true"
-     inkscape:bbox-paths="true"
-     inkscape:snap-others="false"
-     inkscape:window-width="2560"
-     inkscape:window-height="1342"
-     inkscape:window-x="0"
-     inkscape:window-y="28"
-     inkscape:window-maximized="1"
-     showborder="false">
-    <inkscape:grid
-       type="xygrid"
-       id="grid11512" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata10870">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(0,-1030.3622)">
-    <g
-       inkscape:export-ydpi="90"
-       inkscape:export-xdpi="90"
-       inkscape:export-filename="/home/lapo.fedora/SparkleShare/gnome-mockups/system-settings/network/network-panel-summary.png"
-       style="display:inline"
-       id="g62929"
-       transform="translate(-643.91421,517.29894)">
-      <g
-         transform="translate(0,30)"
-         id="g62931">
-        <rect
-           style="fill:url(#linearGradient38519);fill-opacity:1;stroke:#3465a4;stroke-width:1;stroke-linecap:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill-rule:nonzero;stroke-linejoin:miter;stroke-dashoffset:0;marker:none;marker-start:none;marker-mid:none;marker-end:none;paint-order:normal;filter-blend-mode:normal;filter-gaussianBlur-deviation:0;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-           id="rect62935"
-           width="63.856125"
-           height="21.093594"
-           x="644.5"
-           y="483.5"
-           rx="2"
-           ry="2" />
-        <rect
-           style="fill:url(#linearGradient62981-1-1);fill-opacity:1;stroke:#3465a4;stroke-width:1;stroke-linecap:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;display:inline"
-           id="rect62937"
-           width="29.97398"
-           height="17.022524"
-           x="676.49646"
-           y="485.67679"
-           rx="1"
-           ry="1" />
-        <g
-           transform="translate(-7.9861743,-1.9445437)"
-           id="g62939" />
-        <path
-           inkscape:connector-curvature="0"
-           inkscape:original-d="m 677.59874,486.57192 27.94632,0"
-           inkscape:path-effect="#path-effect62989-8-0"
-           id="path62947"
-           d="m 677.59874,486.57192 27.94632,0"
-           style="fill:none;stroke:#ffffff;stroke-width:1px;stroke-linecap:round;stroke-linejoin:miter;stroke-opacity:1" />
-      </g>
-      <text
-         transform="scale(1.0113976,0.98873084)"
-         sodipodi:linespacing="125%"
-         id="text62949-7"
-         y="534.96918"
-         x="646.71399"
-         style="font-size:10.01104736px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#3465a4;fill-opacity:1;stroke:none;display:inline;font-family:Cantarell;-inkscape-font-specification:Cantarell Bold;"
-         xml:space="preserve"><tspan
-           y="534.96918"
-           x="646.71399"
-           id="tspan62951-7"
-           sodipodi:role="line">ON</tspan></text>
-      <text
-         transform="scale(1.0113976,0.98873084)"
-         sodipodi:linespacing="125%"
-         id="text62949"
-         y="533.94482"
-         x="646.71399"
-         style="font-size:10.01104736px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#ffffff;fill-opacity:1;stroke:none;font-family:Cantarell;-inkscape-font-specification:Cantarell Bold"
-         xml:space="preserve"><tspan
-           y="533.94482"
-           x="646.71399"
-           id="tspan62951"
-           sodipodi:role="line">ON</tspan></text>
-    </g>
-  </g>
-</svg>

data/classic.json.in

@@ -1,9 +1,11 @@
 {
     "parentMode": "user",
     "stylesheetName": "gnome-classic.css",
+    "hasOverview": false,
+    "showWelcomeDialog": false,
     "enabledExtensions": [@CLASSIC_EXTENSIONS@],
-    "panel": { "left": ["activities", "appMenu"],
+    "panel": { "left": ["appMenu"],
                "center": [],
-               "right": ["a11y", "keyboard", "dateMenu", "aggregateMenu"]
+               "right": ["a11y", "keyboard", "dateMenu", "quickSettings"]
              }
 }

data/gnome-classic-wayland.desktop.in

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=GNOME Classic on Wayland
+Comment=This session logs you into GNOME Classic
+Exec=env GNOME_SHELL_SESSION_MODE=classic gnome-session
+TryExec=gnome-session
+Type=Application
+DesktopNames=GNOME-Classic;GNOME;
+X-GDM-SessionRegisters=true

data/gnome-classic-xorg.desktop.in

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=GNOME Classic on Xorg
+Comment=This session logs you into GNOME Classic
+Exec=env GNOME_SHELL_SESSION_MODE=classic gnome-session
+TryExec=gnome-session
+Type=Application
+DesktopNames=GNOME-Classic;GNOME;
+X-GDM-SessionRegisters=true

data/gnome-classic.desktop.in

@@ -1,7 +1,8 @@
 [Desktop Entry]
 Name=GNOME Classic
 Comment=This session logs you into GNOME Classic
-Exec=env GNOME_SHELL_SESSION_MODE=classic gnome-session --session gnome-classic
+Exec=env GNOME_SHELL_SESSION_MODE=classic gnome-session
 TryExec=gnome-session
 Type=Application
 DesktopNames=GNOME-Classic;GNOME;
+X-GDM-SessionRegisters=true

data/gnome-classic.scss

@@ -0,0 +1,95 @@
+/* Use the gnome-shell theme, but with light colors */
+$variant: 'light';
+
+@import "gnome-shell-sass/_colors"; //use gtk colors
+@import "gnome-shell-sass/_drawing";
+@import "gnome-shell-sass/_common";
+@import "gnome-shell-sass/_widgets";
+
+/* Overrides */
+
+#panel, #panel.solid {
+  font-weight: normal;
+  background-color: $bg_color;
+  background-gradient-direction: vertical;
+  background-gradient-end: darken($bg_color,5%);
+  border-top-color: #666; /* we don't support non-uniform border-colors and
+                             use the top border color for any border, so we
+                             need to set it even if all we want is a bottom
+                             border */
+  border-bottom: 1px solid #666;
+  app-icon-bottom-clip: 0px;
+  &:overview {
+    background-color: #000;
+    background-gradient-end: #000;
+    border-top-color: #000;
+    border-bottom: 1px solid #000;
+    .panel-button { color: #fff; }
+  }
+
+  .panel-button {
+    -natural-hpadding: 8px;
+    -minimum-hpadding: 4px;
+    font-weight: normal;
+    color: $fg_color;
+    text-shadow: none;
+    transition-duration: 0ms;
+    border: 0;
+    border-radius: 0px;
+
+    &.clock-display {
+      .clock {
+        transition-duration: 0ms;
+        border: 0;
+        border-radius: 0px;
+      }
+    }
+
+    &:hover {
+      color: lighten($fg_color,10%);
+      text-shadow: none;
+      & .system-status-icon { icon-shadow: none; }
+    }
+    &:active, &:overview, &:focus, &:checked {
+      // Trick due to St limitations. It needs a background to draw
+      // a box-shadow
+      background-color: $selected_bg_color;
+      color: $selected_fg_color;
+      box-shadow: none;
+      & > .system-status-icon { icon-shadow: none; }
+    }
+
+    .app-menu-icon { width: 0; height: 0; margin: 0; } // shell's display:none; :D
+
+    .system-status-icon {
+      icon-shadow: none;
+    }
+  }
+
+  .panel-corner,
+  .panel-corner:active,
+  .panel-corner:overview,
+  .panel-corner:focus {
+    -panel-corner-radius: 0;
+  }
+  &.lock-screen,
+  &.unlock-screen, 
+  &.login-screen { 
+    background-color: transparentize($bg_color, 0.5);
+    background-gradient-start: transparentize($bg_color, 0.5);
+    background-gradient-end: transparentize($bg_color, 0.5);
+    border-bottom: none;
+    .panel-button { color: $osd_fg_color; }
+  }
+}
+
+#appMenu { 
+  spinner-image: url("classic-process-working.svg"); 
+  .panel-status-menu-box { padding: 0; }
+}
+.tile-preview-left.on-primary,
+.tile-preview-right.on-primary,
+.tile-preview-left.tile-preview-right.on-primary {
+    /* keep in sync with -panel-corner-radius */
+    border-radius: 0;
+}

data/gnome-classic.session.desktop.in

@@ -1,3 +0,0 @@
-[GNOME Session]
-Name=GNOME Classic
-RequiredComponents=org.gnome.Shell;org.gnome.SettingsDaemon.A11yKeyboard;org.gnome.SettingsDaemon.A11ySettings;org.gnome.SettingsDaemon.Clipboard;org.gnome.SettingsDaemon.Color;org.gnome.SettingsDaemon.Datetime;org.gnome.SettingsDaemon.Housekeeping;org.gnome.SettingsDaemon.Keyboard;org.gnome.SettingsDaemon.MediaKeys;org.gnome.SettingsDaemon.Mouse;org.gnome.SettingsDaemon.Power;org.gnome.SettingsDaemon.PrintNotifications;org.gnome.SettingsDaemon.Rfkill;org.gnome.SettingsDaemon.ScreensaverProxy;org.gnome.SettingsDaemon.Sharing;org.gnome.SettingsDaemon.Smartcard;org.gnome.SettingsDaemon.Sound;org.gnome.SettingsDaemon.Wacom;org.gnome.SettingsDaemon.XSettings;nautilus-classic;

data/gnome-shell-sass/COPYING

@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc. <http://fsf.org>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

data/gnome-shell-sass/README.md

@@ -0,0 +1,16 @@
+# GNOME Shell Sass
+GNOME Shell Sass is a project intended to allow the sharing of the
+theme sources in sass between gnome-shell and other projects like
+gnome-shell-extensions.
+
+Any changes should be done in the [GNOME Shell subtree][shell-subtree]
+and not the stand-alone [gnome-shell-sass repository][sass-repo]. They
+will then be synchronized periodically before releases.
+
+## License
+GNOME Shell Sass is distributed under the terms of the GNU General Public
+License, version 2 or later. See the [COPYING][license] file for details.
+
+[shell-subtree]: https://gitlab.gnome.org/GNOME/gnome-shell/tree/HEAD/data/theme/gnome-shell-sass
+[sass-repo]: https://gitlab.gnome.org/GNOME/gnome-shell-sass
+[license]: COPYING

data/gnome-shell-sass/_colors.scss

@@ -0,0 +1,69 @@
+// When color definition differs for dark and light variant,
+// it gets @if-ed depending on $variant
+
+@import '_palette.scss';
+
+$_dark_base_color: darken(desaturate(#241f31, 100%), 2%);
+
+$base_color: if($variant == 'light', #fff, $_dark_base_color);
+$bg_color: if($variant == 'light', #f6f5f4, lighten($base_color, 5%));
+$fg_color: if($variant == 'light', transparentize(black, .2), white);
+
+$selected_fg_color: #fff;
+$selected_bg_color: #3584e4;
+$selected_borders_color: if($variant== 'light', darken($selected_bg_color, 15%), darken($selected_bg_color, 30%));
+
+$borders_color: if($variant == 'light', transparentize($fg_color, .5), transparentize($fg_color, .9));
+$borders_edge: if($variant == 'light', rgba(255,255,255,0.8), lighten($bg_color, 5%));
+
+$link_color: if($variant == 'light', darken($selected_bg_color, 10%), lighten($selected_bg_color, 20%));
+$link_visited_color: if($variant == 'light', darken($selected_bg_color, 20%), lighten($selected_bg_color, 10%));
+
+$warning_color: if($variant == 'light', $yellow_5, #cd9309);
+$error_color: if($variant == 'light', $red_3, $red_4);
+$success_color: if($variant == 'light', $green_4, $green_5);
+$destructive_color: $error_color;
+
+$osd_fg_color: white;
+$osd_bg_color: $_dark_base_color; //hardcoded for both light & dark
+$osd_insensitive_bg_color: transparentize(mix($osd_fg_color, opacify($osd_bg_color, 1), 10%), 0.5);
+$osd_insensitive_fg_color: if($variant == 'light', mix($osd_fg_color, $osd_bg_color, 80%),  mix($osd_fg_color, $osd_bg_color, 70%));
+$osd_borders_color: transparentize(black, 0.3);
+$osd_outer_borders_color: transparentize($osd_fg_color, 0.98);
+
+$shadow_color: if($variant == 'light', rgba(0,0,0,0.1), rgba(0,0,0,0.2));
+
+// cards
+$card_bg_color: if($variant == 'light', darken($bg_color, 5%), lighten($bg_color, 2%));
+
+// notifications
+$bubble_buttons_color: if($variant == 'light', darken($bg_color, 12%), lighten($bg_color, 10%));
+
+// overview background color
+$system_bg_color: $base_color;
+
+//insensitive state derived colors
+$insensitive_fg_color: mix($fg_color, $bg_color, 50%);
+$insensitive_bg_color: mix($bg_color, $base_color, 60%);
+$insensitive_borders_color: mix($borders_color, $base_color, 60%);
+
+//colors for the backdrop state, derived from the main colors.
+$backdrop_base_color: if($variant =='light', darken($base_color,1%), lighten($base_color,1%));
+$backdrop_bg_color: $bg_color;
+$backdrop_fg_color: mix($fg_color, $backdrop_bg_color, 80%);
+$backdrop_insensitive_color: if($variant =='light', darken($backdrop_bg_color,15%), lighten($backdrop_bg_color,15%));
+$backdrop_borders_color: mix($borders_color, $bg_color, 90%);
+$backdrop_dark_fill: mix($backdrop_borders_color,$backdrop_bg_color, 35%);
+
+
+// derived checked colors
+$checked_bg_color: if($variant=='light', darken($bg_color, 7%), lighten($bg_color, 7%));
+$checked_fg_color: if($variant=='light', darken($fg_color, 7%), lighten($fg_color, 7%));
+
+// derived hover colors
+$hover_bg_color: if($variant=='light', darken($bg_color, 3%), lighten($bg_color, 10%));
+$hover_fg_color: if($variant=='light', darken($fg_color, 5%), lighten($fg_color, 10%));
+
+// derived active colors
+$active_bg_color: if($variant=='light', darken($bg_color, 5%), lighten($bg_color, 12%));
+$active_fg_color: if($variant=='light', darken($fg_color, 5%), lighten($fg_color, 12%));

data/gnome-shell-sass/_common.scss

@@ -0,0 +1,231 @@
+//This is the RIGHT PLACE to edit the stylesheet
+
+//let's start by telling people not to edit the generated CSS:
+$cakeisalie: "This stylesheet is generated, DO NOT EDIT";
+/* #{$cakeisalie} */
+
+/* Copyright 2009, 2015 Red Hat, Inc.
+ *
+ * Portions adapted from Mx's data/style/default.css
+ *   Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU Lesser General Public License,
+ * version 2.1, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT ANY
+ * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* Global Values */
+
+// padding, margin and spacing
+$base_padding: 6px;
+$base_margin: 4px;
+
+// border radii
+$base_border_radius: 8px;
+
+// radii of things that display over other things, e.g. popovers
+$modal_radius: $base_border_radius*2; // 24px
+
+// Chroma key to flag when a background-color is always occluded, not visible.
+// This allows any box-shadow behind it to be rendered more efficiently by
+// omitting the middle rectangle.
+$invisible_occluded_bg_color: rgba(3,2,1,0);
+
+// fonts
+$base_font_size: 11;
+$text_shadow_color: if($variant == 'light', rgba(255,255,255,0.3), rgba(0,0,0,0.2));
+
+// icons
+$base_icon_size: 1.09em;
+$large_icon_size: $base_icon_size*2; // 32px
+// $base_icon_size: 16px;
+
+// Stage
+stage {
+  @include fontsize($base_font_size);
+  color: $fg_color;
+}
+
+/* Common Stylings */
+
+// osd panels
+%osd_panel {
+  color: $osd_fg_color;
+  background-color: $osd_bg_color;
+  border: 1px solid $osd_outer_borders_color;
+  border-radius: 999px;
+  padding: $base_padding*2;
+}
+
+// Overview panels
+// for the dash and workspace switcher
+%overview_panel {
+  color: $osd_fg_color;
+  background-color: transparentize($osd_fg_color, 0.9);
+}
+
+// icon tiles
+%tile {
+  border-radius: $base_border_radius * 2; // 16px
+  padding: $base_padding;
+  spacing: $base_padding;
+  border: 2px solid transparent;
+  transition-duration: 200ms;
+  text-align: center;
+}
+
+// dialogs
+%bubble_panel {
+  color: $fg_color;
+  background-color: $bg_color;
+  border-radius: $base_border_radius*1.25 + 1px;
+  border: 1px solid $borders_edge;
+}
+
+// normal button styling
+%button {
+  border-radius: $base_border_radius - 2px; // 6px
+  border-style: solid;
+  border-width: 1px;
+  font-weight: bold;
+  padding: $base_padding*.5 $base_padding*4;
+
+  @include button(normal);
+  &:focus { @include button(focus);}
+  &:hover { @include button(hover);}
+  &:insensitive { @include button(insensitive);}
+  &:active { @include button(active);}
+  &:checked { @include button(checked);}
+}
+
+// normal icon-only button
+%icon_button {
+  border-radius: 99px;
+  border-style: solid;
+  border-width: 1px;
+  font-weight: bold;
+  padding: $base_padding*2;
+
+  @include button(normal);
+  &:focus { @include button(focus);}
+  &:hover { @include button(hover);}
+  &:insensitive { @include button(insensitive);}
+  &:active { @include button(active);}
+  &:checked { @include button(checked);}
+
+  & > StIcon { icon-size: $base_icon_size; }
+}
+
+// buttons in dialogs/notifications
+// lighter in color and have a greater radius
+
+$bubble_button_radius:$base_border_radius*1.25;
+
+%bubble_button {
+  padding: $base_padding * 2;
+  font-weight: bold !important;
+
+  &:ltr {margin-right: 1px;}
+  &:rtl {margin-left: 1px;}
+
+  @include button(normal, $c:$bubble_buttons_color);
+  &:insensitive { @include button(insensitive, $c:$bubble_buttons_color);}
+  &:focus { @include button(focus, $c:$bubble_buttons_color);}
+  &:hover { @include button(hover, $c:$bubble_buttons_color);}
+  &:active { @include button(active, $c:$bubble_buttons_color);}
+  &:checked { @include button(checked, $c:$bubble_buttons_color);}
+  
+  &:first-child:ltr {
+    border-radius: 0 0 0 $bubble_button_radius; 
+  }
+
+  &:last-child:ltr {
+    border-radius: 0 0 $bubble_button_radius 0;
+    margin-right: 0 !important;
+  }
+
+  &:first-child:rtl {
+    border-radius: 0 0 $bubble_button_radius 0;
+  }
+
+  &:last-child:rtl {
+    border-radius: 0 0 0 $bubble_button_radius;
+    margin-left: 0 !important;
+  }
+
+  &:first-child:last-child {
+    border-radius: 0 0 $bubble_button_radius $bubble_button_radius !important;
+    margin-left: 0 !important;
+    margin-right: 0 !important;
+  }
+}
+
+// buttons on OSD elements
+// that are undecorated by default and use OSD colors
+%osd_button {
+  @include button(undecorated);
+  &:insensitive { @include button(undecorated, $tc:$osd_fg_color, $c:$osd_bg_color);}
+  &:focus { @include button(focus, $tc:$osd_fg_color, $c:$osd_bg_color);}
+  &:hover { @include button(hover, $tc:$osd_fg_color, $c:$osd_bg_color);}
+  &:active { @include button(active, $tc:$osd_fg_color, $c:$osd_bg_color);}
+  &:outlined,&:checked { @include button(checked, $tc:$osd_fg_color, $c:$osd_bg_color);}
+}
+
+/* General Typography */
+
+%large_title {
+  font-weight: 300;
+  @include fontsize(24);
+}
+
+%title_1 {
+  font-weight: 800;
+  @include fontsize(20);
+}
+
+%title_2 {
+  font-weight: 800;
+  @include fontsize(15);
+}
+
+%title_3 {
+  font-weight: 700;
+  @include fontsize(15);
+}
+
+%title_4 {
+  font-weight: 700;
+  @include fontsize(13);
+}
+
+%heading {
+  font-weight: 700;
+  @include fontsize(11);
+}
+
+%caption_heading {
+  font-weight: 700;
+  @include fontsize(9);
+}
+
+%caption {
+  font-weight: 400;
+  @include fontsize(9);
+}
+
+%smaller {
+  font-weight: 400;
+  @include fontsize(8);
+}
+
+%monospace {font-family: monospace;}
+%numeric { font-feature-settings: "tnum";}

data/gnome-shell-sass/_drawing.scss

@@ -0,0 +1,312 @@
+// Drawing mixins
+
+// generic drawing of more complex things
+
+@function draw_widget_edge($c:$borders_edge) {
+// outer highlight "used" on most widgets
+  @return 0 1px $c;
+}
+
+// provide font size in rem, with px fallback
+@mixin fontsize($size: 24, $base: 16) {
+  font-size: round($size) + pt;
+  //font-size: ($size / $base) * 1rem;
+}
+
+@mixin draw_shadows($shadow1, $shadow2:none, $shadow3:none, $shadow4:none) {
+//
+// Helper function to stack up to 4 box-shadows;
+//
+  @if $shadow4!=none { box-shadow: $shadow1, $shadow2, $shadow3, $shadow4; }
+  @else if $shadow3!=none { box-shadow: $shadow1, $shadow2, $shadow3; }
+  @else if $shadow2!=none { box-shadow: $shadow1, $shadow2; }
+  @else { box-shadow: $shadow1; }
+}
+
+// entries
+
+@mixin entry($t, $fc:$selected_bg_color) {
+//
+// Entries drawing function
+//
+// $t: entry type
+// $fc: focus color
+//
+// possible $t values:
+// normal, focus, insensitive
+//
+
+  @if $t==normal {
+    background-color: lighten($bg_color, 5%);
+    color: transparentize($fg_color,0.3);
+    border: 2px solid lighten($bg_color, 5%);
+  }
+
+  @if $t==focus {
+    background-color: mix(lighten($bg_color, 5%), $selected_bg_color, 95%);
+    border-color: $fc;
+    color: $fg_color;
+    &:hover {}
+  }
+
+  @if $t==hover {
+    background-color:lighten($hover_bg_color, 5%);
+    border-color:lighten($hover_bg_color, 5%);
+    color: transparentize($fg_color,0.3);
+  }
+
+  @if $t==insensitive {
+    background-color:lighten($insensitive_bg_color, 5%);
+    border-color: lighten($insensitive_bg_color, 5%);
+    color: $insensitive_fg_color;
+  }
+}
+
+// On-screen Keyboard
+@mixin keyboard_key($t, $c:$osd_bg_color, $tc:$osd_fg_color) {
+//
+// Keyboard key drawing function
+//
+// $t:    key type,
+// $c:    base key color for colored* types
+// $tc:   optional text color for colored* types
+//
+// possible $t values:
+// normal, hover, active, insensitive, insensitive-active,
+// backdrop, backdrop-active, backdrop-insensitive, backdrop-insensitive-active,
+// osd, osd-hover, osd-active, osd-insensitive, osd-backdrop, undecorated
+//
+
+  // normal key
+  @if $t==normal {
+    color: $tc;
+    background-color: lighten($c, 3%);
+  }
+
+  // focused key
+  @if $t==focus {
+    color: $tc;
+    background-color: mix(lighten($c, 3%), $selected_bg_color, 90%);
+    box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.4);
+    &:hover {
+      background-color: mix(lighten($c, 8%), $selected_bg_color, 90%);
+      box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.3);
+    }
+    &:active {
+      background-color: mix(lighten($c, 10%), $selected_bg_color, 90%);
+      box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.3);
+    }
+  }
+
+  // hover key
+  @else if $t==hover {
+    color: $tc;
+    background-color: lighten($c, 7%);
+  }
+
+  // active key
+  @else if $t==active {
+    color: $tc;
+    background-color: lighten($c, 10%);
+  }
+
+  // checked key
+  @else if $t==checked {
+    color: $tc;
+    background-color: lighten($c, 15%);
+  }
+
+  // insensitive key
+  @else if $t==insensitive {
+    color: $insensitive_fg_color;
+    background-color: $insensitive_bg_color;
+  }
+
+  // reset
+  @else if $t==undecorated {
+    background-color: transparent;
+    background-image: none;
+  }
+}
+
+//
+// Button drawing function
+//
+// $t:    button type,
+// $c:    base button colors, derived from fg_color
+// $tc:    base button colors, derived from fg_color
+//
+// possible $t values:
+// normal, hover, active, insensitive, insensitive-active,
+// backdrop, backdrop-active, backdrop-insensitive, backdrop-insensitive-active,
+// osd, osd-hover, osd-active, osd-insensitive, osd-backdrop, undecorated
+//
+// since buttons are all flat an borderless now the mixin is simpler
+
+@mixin button($t, $tc:$fg_color, $c:$bg_color) {
+
+  $button_bg_color: mix($tc, $c, 5%);
+  transition-duration: 100ms;
+
+  // normal button
+  @if $t==normal {
+    color: $tc;
+    background-color: $button_bg_color;
+  }
+
+  // focused button
+  @if $t==focus {
+    color: $tc;
+    background-color: mix($button_bg_color, $selected_bg_color, 90%);
+    box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.4);
+    &:hover {
+      background-color: mix(lighten($button_bg_color, 3%), $selected_bg_color, 90%);
+      box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.3);
+    }
+    &:active {
+      background-color: mix(lighten($button_bg_color, 6%), $selected_bg_color, 90%);
+      box-shadow: inset 0 0 0 2px transparentize($selected_bg_color, 0.3);
+    }
+  }
+
+  // hover button
+  @else if $t==hover {
+    color: $tc;
+    background-color: lighten($button_bg_color, 3%);
+  }
+
+  // active button
+  @else if $t==active {
+    color: $tc;
+    background-color:  lighten($button_bg_color, 6%);
+  }
+
+  // checked button
+  @else if $t==checked {
+    color: $tc;
+    background-color: lighten($button_bg_color, 9%);
+    &:hover { background-color: lighten($button_bg_color, 12%);}
+    &:active { background-color: lighten($button_bg_color, 15%);}
+  }
+
+  // insensitive button
+  @else if $t==insensitive {
+    color: transparentize($tc, 0.5);
+    background-color: transparentize($tc, .95);
+  }
+
+  // default/suggested button
+  @else if $t==default {
+    background-color: $selected_bg_color;
+    color: $selected_fg_color;
+    &:focus {
+      box-shadow: inset 0 0 0 2px lighten($selected_bg_color, 10%);
+    }
+    &:hover, &:focus { 
+      background-color: lighten($selected_bg_color, 5%);
+      color: lighten($selected_fg_color, 5%);
+    }
+    &:active {
+      background-color: darken($selected_bg_color, 7%);
+      color: darken($selected_fg_color, 7%);
+    }
+    &:insensitive {
+      @include button(insensitive);
+      background-color: transparentize($selected_bg_color, .5);
+      color: transparentize($selected_fg_color, .5);
+    }
+  }
+
+  // reset
+  @else if $t==undecorated {
+    background-color: transparent;
+    background-color: none;
+    &:insensitive {
+      @include button(insensitive);
+      background-color: transparent;
+      color: transparentize($selected_fg_color, .5);
+    }
+  }
+}
+
+// tile
+@mixin tile_button($color, $flat: true) {
+  @extend %tile;
+  @if $flat {
+    background-color: transparent;
+  } @else {
+    background-color: transparentize($color, .84);
+  }
+  &:hover { background-color: transparentize($color, .9);}
+  &:selected, &:focus {
+    background-color: transparentize($color, .87);
+    &:hover { background-color: transparentize($color, .84);}
+    &:active { background-color: transparentize($color, .87);}
+  }
+  &:active { background-color: transparentize($color, .84);}
+  &:outlined, &:checked {
+    background-color: transparentize($color, .81);
+    &:active { background-color: transparentize($color, .78);}
+    &:hover { background-color: transparentize($color, .75);}
+  }
+  &:drop {
+    border: 2px solid transparentize($selected_bg_color, .2); //already 2px transparent so no jumping
+    background-color: transparentize($selected_bg_color, .8);
+  }
+}
+
+// overview icon, dash, app grid
+@mixin overview_icon($color, $flat: true) {
+  transition-duration: 400ms;
+  .overview-icon { @extend %tile; }
+  @if $flat {
+    .overview-icon { background-color: transparent;}
+  } @else {
+    .overview-icon { background-color: transparentize($color, .81);}
+  }
+  &:hover .overview-icon { background-color: transparentize($color, .9);}
+
+  &:selected .overview-icon,
+  &:focus .overview-icon {
+    background-color: transparentize($color, .87);
+    &:hover .overview-icon { background-color: transparentize($color, .84);}
+    &:active .overview-icon { background-color: transparentize($color, .87);}
+  }
+  &:active .overview-icon { background-color: transparentize($color, .84);}
+  &:outlined .overview-icon,
+  &:checked .overview-icon {
+    background-color: transparentize($color, .81);
+    &:active .overview-icon { background-color: transparentize($color, .78);}
+    &:hover .overview-icon { background-color: transparentize($color, .75);}
+  }
+  &:drop .overview-icon {
+    border: 2px solid transparentize($selected_bg_color, .2); //already 2px transparent so no jumping
+    background-color: transparentize($selected_bg_color, .8);
+  }
+}
+
+// styling for elements within popovers that look like notifications
+@mixin card($flat: false) {
+  border-radius: $base_border_radius;
+  margin: $base_margin;
+  box-shadow: 0 1px 1px 0 $shadow_color;
+
+  @if $flat {
+    @include button(undecorated);
+    box-shadow: none !important;
+  } @else {
+    @include button(normal, $c:$card_bg_color);
+  }
+
+  &:focus {
+    @include button(focus, $c:$card_bg_color);
+  }
+
+  &:hover {
+    @include button(hover, $c:$card_bg_color);
+  }
+
+  &:active {
+    @include button(active, $c:$card_bg_color);
+  }
+}

data/gnome-shell-sass/_high-contrast-colors.scss

@@ -0,0 +1,65 @@
+// When color definition differs for dark and light variant,
+// it gets @if ed depending on $variant
+
+@import '_palette.scss';
+
+$base_color: if($variant == 'light', #fff, #000);
+$bg_color: $base_color;
+$fg_color: if($variant == 'light', transparentize(black, .2), white);
+
+$selected_fg_color: #ffffff;
+$selected_bg_color: $blue_3;
+
+$selected_borders_color: darken($selected_bg_color, 20%);
+$borders_color: lighten($bg_color,17%);
+$borders_edge: $borders_color;
+$link_color: lighten($selected_bg_color,20%);
+$link_visited_color: lighten($selected_bg_color,10%);
+
+$warning_color: if($variant == 'light', $yellow_5, #cd9309);
+$error_color: if($variant == 'light', $red_3, $red_4);
+$success_color: if($variant == 'light', $green_4, $green_5);
+$destructive_color: $error_color;
+
+$osd_fg_color: white;
+$osd_bg_color: $base_color;
+$osd_insensitive_bg_color: transparentize(mix($osd_fg_color, opacify($osd_bg_color, 1), 10%), 0.5);
+$osd_insensitive_fg_color: if($variant == 'light', mix($osd_fg_color, $osd_bg_color, 80%),  mix($osd_fg_color, $osd_bg_color, 70%));
+$osd_borders_color: $osd_bg_color;
+$osd_outer_borders_color: $osd_bg_color;
+
+$shadow_color: transparent;
+
+// cards
+$card_bg_color: if($variant == 'light', darken($bg_color, 12%), lighten($bg_color, 12%));
+
+// notifications
+$bubble_buttons_color: if($variant == 'light', darken($bg_color, 22%), lighten($bg_color, 31%));
+
+// overview background color
+$system_bg_color: lighten($base_color, 17%);
+
+//insensitive state derived colors
+$insensitive_fg_color: mix($fg_color, $bg_color, 50%);
+$insensitive_bg_color: mix($bg_color, $base_color, 60%);
+$insensitive_borders_color: $borders_color;
+
+//colors for the backdrop state, derived from the main colors.
+$backdrop_base_color: lighten($base_color,1%);
+$backdrop_bg_color: $bg_color;
+$backdrop_fg_color: mix($fg_color, $backdrop_bg_color, 80%);
+$backdrop_insensitive_color: lighten($backdrop_bg_color,15%);
+$backdrop_borders_color: mix($borders_color, $bg_color, 90%);
+$backdrop_dark_fill: mix($backdrop_borders_color,$backdrop_bg_color, 35%);
+
+// derived checked colors
+$checked_bg_color: if($variant=='light', darken($bg_color, 12%), lighten($bg_color, 18%));
+$checked_fg_color: if($variant=='light', darken($fg_color, 12%), lighten($fg_color, 18%));
+
+// derived hover colors
+$hover_bg_color: if($variant=='light', darken($bg_color, 8%), lighten($bg_color, 20%));
+$hover_fg_color: if($variant=='light', darken($fg_color, 10%), lighten($fg_color, 20%));
+
+// derived active colors
+$active_bg_color: if($variant=='light', darken($bg_color, 10%), lighten($bg_color, 22%));
+$active_fg_color: if($variant=='light', darken($fg_color, 10%), lighten($fg_color, 22%));

data/gnome-shell-sass/_palette.scss

@@ -0,0 +1,46 @@
+//GNOME Color Palette
+$blue_1: #99c1f1;
+$blue_2: #62a0ea;
+$blue_3: #3584e4;
+$blue_4: #1c71d8;
+$blue_5: #1a5fb4;
+$green_1: #8ff0a4;
+$green_2: #57e389;
+$green_3: #33d17a;
+$green_4: #2ec27e;
+$green_5: #26a269;
+$yellow_1: #f9f06b;
+$yellow_2: #f8e45c;
+$yellow_3: #f6d32d;
+$yellow_4: #f5c211;
+$yellow_5: #e5a50a;
+$orange_1: #ffbe6f;
+$orange_2: #ffa348;
+$orange_3: #ff7800;
+$orange_4: #e66100;
+$orange_5: #c64600;
+$red_1: #f66151;
+$red_2: #ed333b;
+$red_3: #e01b24;
+$red_4: #c01c28;
+$red_5: #a51d2d;
+$purple_1: #dc8add;
+$purple_2: #c061cb;
+$purple_3: #9141ac;
+$purple_4: #813d9c;
+$purple_5: #613583;
+$brown_1: #cdab8f;
+$brown_2: #b5835a;
+$brown_3: #986a44;
+$brown_4: #865e3c;
+$brown_5: #63452c;
+$light_1: #ffffff;
+$light_2: #f6f5f4;
+$light_3: #deddda;
+$light_4: #c0bfbc;
+$light_5: #9a9996;
+$dark_1: #77767b;
+$dark_2: #5e5c64;
+$dark_3: #3d3846;
+$dark_4: #241f31;
+$dark_5: #000000;

data/gnome-shell-sass/_widgets.scss

@@ -0,0 +1,51 @@
+//
+// Shell widgets stylesheets are placed in separate .scss files
+// in 'widgets' and imported into the main stylesheet in this file.
+// To create or update a widget for the shell modify the list below.
+//
+
+/* WIDGETS */
+
+// Primary widgets
+@import 'widgets/base';
+@import 'widgets/entries';
+@import 'widgets/buttons';
+@import 'widgets/check-box';
+@import 'widgets/switches';
+@import 'widgets/slider';
+@import 'widgets/scrollbars';
+// Popovers
+@import 'widgets/popovers';
+@import 'widgets/calendar';
+@import 'widgets/message-list';
+@import 'widgets/ibus-popup';
+// Notifications
+@import 'widgets/notifications';
+@import 'widgets/hotplug';
+// Dialogs
+@import 'widgets/dialogs';
+// OSDs
+@import 'widgets/osd';
+@import 'widgets/switcher-popup';
+@import 'widgets/workspace-switcher';
+@import 'widgets/screenshot';
+// Panel
+@import 'widgets/panel';
+@import 'widgets/corner-ripple';
+@import 'widgets/quick-settings';
+// Overview
+@import 'widgets/overview';
+@import 'widgets/window-picker';
+@import 'widgets/search-entry';
+@import 'widgets/search-results';
+@import 'widgets/dash';
+@import 'widgets/app-grid';
+@import 'widgets/workspace-thumbnails';
+// A11y / misc
+@import 'widgets/a11y';
+@import 'widgets/misc';
+@import 'widgets/keyboard';
+@import 'widgets/looking-glass';
+// Lock / login screens
+@import 'widgets/login-dialog';
+@import 'widgets/screen-shield';

data/gnome-shell-sass/gnome-shell-sass.doap

@@ -0,0 +1,37 @@
+<Project xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+         xmlns:rdfs="http://www.w3.org/2000/01/rdf-schema#"
+         xmlns:foaf="http://xmlns.com/foaf/0.1/"
+         xmlns:gnome="http://api.gnome.org/doap-extensions#"
+         xmlns="http://usefulinc.com/ns/doap#">
+
+  <name xml:lang="en">GNOME Shell Sass</name>
+  <shortdesc xml:lang="en">Sass sources of GNOME Shell</shortdesc>
+  <description>GNOME Shell Sass is a project intended to allow the sharing of the
+ sass theme sources between gnome-shell and other projects like gnome-shell-extensions.</description>
+
+  <category rdf:resource="http://api.gnome.org/doap-extensions#core" />
+  <programming-language>sass</programming-language>
+  <programming-language>css</programming-language>
+
+  <maintainer>
+    <foaf:Person>
+      <foaf:name>Carlos Soriano</foaf:name>
+      <foaf:mbox rdf:resource="mailto:csoriano@gnome.org" />
+      <gnome:userid>csoriano</gnome:userid>
+    </foaf:Person>
+  </maintainer>
+  <maintainer>
+    <foaf:Person>
+      <foaf:name>Florian Müllner</foaf:name>
+      <foaf:mbox rdf:resource="mailto:fmuellner@gnome.org" />
+      <gnome:userid>fmuellner</gnome:userid>
+    </foaf:Person>
+  </maintainer>
+  <maintainer>
+    <foaf:Person>
+      <foaf:name>Jakub Steiner</foaf:name>
+      <foaf:mbox rdf:resource="mailto:jimmac@gmail.com" />
+      <gnome:userid>jimmac</gnome:userid>
+    </foaf:Person>
+  </maintainer>
+</Project>

data/gnome-shell-sass/widgets/_a11y.scss

@@ -0,0 +1,24 @@
+// Pointer location
+.ripple-pointer-location {
+  width: $ripple_size;
+  height: $ripple_size;
+  border-radius: $ripple_size * 0.5; // radius equals the size of the box to give us the curve
+  background-color: lighten(transparentize($selected_bg_color, 0.7), 30%);
+  box-shadow: 0 0 2px 2px lighten($selected_bg_color, 20%);
+}
+
+// Pointer accessibility notifications
+.pie-timer {
+  width: 60px;
+  height: 60px;
+  -pie-border-width: 3px;
+  -pie-border-color: $selected_bg_color;
+  -pie-background-color: lighten(transparentize($selected_bg_color, 0.7), 40%);
+}
+
+// Screen zoom/Magnifier
+.magnifier-zoom-region {
+  border: 2px solid $selected_bg_color;
+
+  &.full-screen { border-width: 0; }
+}

data/gnome-shell-sass/widgets/_app-grid.scss

@@ -0,0 +1,139 @@
+/* App Grid */
+
+$app_icon_size: 96px;
+
+// app icons
+.icon-grid {
+  row-spacing: $base_padding * 2;
+  column-spacing: $base_padding * 2;
+  max-row-spacing: $base_padding * 7;
+  max-column-spacing: $base_padding * 7;
+  page-padding-top: $base_padding * 4;
+  page-padding-bottom: $base_padding * 4;
+  page-padding-left: $base_padding * 3;
+  page-padding-right: $base_padding * 3;
+}
+
+/* App Icons */
+
+// Icon tiles in the app grid
+.app-well-app {
+  @include overview_icon($osd_fg_color);
+
+  .overview-icon { padding: $base_padding*2;}
+  .overview-icon.overview-icon-with-label {
+    > StBoxLayout {
+      spacing: $base_padding;
+    }
+  }
+}
+
+// app folders
+.app-well-app.app-folder {
+  @include overview_icon($osd_fg_color, $flat: false);
+}
+
+// expanded folder
+.app-folder-dialog {
+  border-radius: $modal_radius*2;
+  background-color: $dash_background_color;
+
+  & .folder-name-container {
+    padding: 24px 36px 0;
+    spacing: 12px;
+
+    & .folder-name-label,
+    & .folder-name-entry {
+      @extend %title_1;
+    }
+
+    & .folder-name-entry { width: 300px }
+
+    /* FIXME: this is to keep the label in sync with the entry */
+    & .folder-name-label { padding: 5px 7px; color: $osd_fg_color; }
+
+    & .edit-folder-button {
+      @extend %button;
+      padding: 0;
+      width: 36px;
+      height: 36px;
+      border-radius: 99px;
+      & > StIcon { icon-size: $base_icon_size }
+    }
+  }
+
+  & .icon-grid {
+    row-spacing: $base_padding * 2;
+    column-spacing: $base_padding * 5;
+    page-padding-top: 0;
+    page-padding-bottom: 0;
+    page-padding-left: 0;
+    page-padding-right: 0;
+  }
+
+  & .page-indicators {
+    margin-bottom: 18px;
+  }
+}
+
+.app-folder-dialog-container {
+  padding: $base_padding*2;
+  width: 640px;
+  height: 640px;
+}
+
+// Running app indicator (also shown in dash)
+.app-well-app-running-dot {
+  height: 5px;
+  width: 5px;
+  border-radius:5px;
+  margin-bottom: 8px;
+  background-color: $osd_fg_color;
+}
+
+// Rename popup for app folders
+.rename-folder-popup {
+  .rename-folder-popup-item {
+    spacing: $base_padding;
+    &:ltr, &:rtl { padding: 0 $base_padding * 2; }
+  }
+}
+
+// App Grid pagination indicators
+.page-indicator {
+  padding: $base_padding $base_padding * 2 0;
+  transition-duration:400ms;
+
+  .page-indicator-icon {
+    width: 10px;
+    height: 10px;
+    border-radius: 10px; // the same as height&width
+    background-color: white;
+  }
+}
+
+.apps-scroll-view {
+  padding: 0;
+}
+
+// shutdown and other actions in the grid
+.system-action-icon {
+  background-color: rgba(0,0,0,0.8);
+  color: #fff;
+  border-radius: 99px;
+  icon-size: $app_icon_size * 0.5;
+}
+
+.page-navigation-arrow {
+  &  > StIcon {
+    margin: 6px;
+    padding: 18px;
+    width: 24px;
+    height: 24px;
+    border-radius: 99px;
+  }
+
+  &:insensitive > StIcon { @include button(undecorated, $osd_fg_color, transparentize($osd_bg_color, 0.5));}
+  &:hover > StIcon { @include button(hover, $osd_fg_color, transparentize($osd_bg_color, 0.5));}
+  &:active > StIcon { @include button(active, $osd_fg_color, transparentize($osd_bg_color, 0.5));}
+}

data/gnome-shell-sass/widgets/_base.scss

@@ -0,0 +1,18 @@
+// Links
+.shell-link {
+  color: $link_color;
+
+  &:hover {
+    color: lighten($link_color, 10%);
+  }
+}
+
+// Outline for low res icons
+.lowres-icon {
+  icon-shadow: 0 1px 2px rgba(black, 0.3);
+}
+
+// Dropshadow for large icons
+.icon-dropshadow {
+  icon-shadow: 0 1px 5px rgba(black, 0.8);
+}

data/gnome-shell-sass/widgets/_buttons.scss

@@ -0,0 +1,10 @@
+/* Buttons */
+
+.button {
+  @extend %button; // that's it
+  min-height: 22px;
+}
+
+.icon-button {
+  @extend %icon_button; // that's it
+}

data/gnome-shell-sass/widgets/_calendar.scss

@@ -0,0 +1,257 @@
+/* Date/Time Menu */
+
+// overall menu
+#calendarArea {
+  padding: $base_padding - 2px;
+}
+
+// Calendar menu side column
+.datemenu-calendar-column {
+  spacing: $base_padding;
+  &:ltr {padding-left: $base_padding;}
+  &:rtl {padding-right: $base_padding;}
+  .datemenu-displays-box {spacing: $base_padding;}
+}
+
+/* today button (the date) */
+.datemenu-today-button {
+  @include card($flat: true);
+  padding: $base_padding * 1.5;
+
+  // weekday label
+  .day-label {
+    @extend %heading;
+  }
+
+  // date label
+  .date-label {
+    @extend %title_2;
+  }
+}
+
+/* Calendar */
+.calendar {
+  @include card(flat);
+  margin-top: 0;
+
+  // month header
+  .calendar-month-header {
+
+    // prev/next month icons
+    .calendar-change-month-back StIcon,
+    .calendar-change-month-forward StIcon {
+      icon-size: $base_icon_size;
+    }
+
+    // month label
+    .calendar-month-label {
+      color: lighten($fg_color,5%);
+      @extend %heading;
+      padding: 8px 0;
+    }
+    .pager-button {
+      background-color: transparent;
+      height: 32px;
+      width: 32px;
+      margin: 2px;
+      border-radius: $base_border_radius - 2px;
+      &:hover, &:focus {background-color: $hover_bg_color;}
+      &:active {background-color: $active_bg_color;}
+    }
+  }
+
+  $calendar_day_size: 3em;
+
+  .calendar-day-base {
+    text-align: center;
+    margin: 2px;
+    padding: 0 !important;
+    height: $calendar_day_size !important;
+    width: $calendar_day_size !important;
+    border-radius: 99px;
+    transition-duration: 100ms;
+    @extend %numeric;
+    @extend %smaller;
+    
+    &:hover {background-color: $hover_bg_color;}
+    &:focus {
+      background-color: mix($bg_color, $selected_bg_color, 80%);
+      color: $selected_fg_color;
+      box-shadow:inset 0 0 0 2px transparentize($selected_bg_color, 0.4);
+    }
+
+    &:active,&:selected {
+      color: $active_fg_color;
+      background-color: $active_bg_color;
+      &:focus {
+        background-color: mix($active_bg_color, $selected_bg_color, 80%);
+      }
+    }
+
+    // day of week heading
+    &.calendar-day-heading {
+      color: $insensitive_fg_color;
+      padding-top: $base_padding;
+      height: 16px !important; // force heading to be smaller height
+      font-weight: bold;
+      @extend %smaller;
+    }
+  }
+
+  .calendar-day {}
+  .calendar-work-day {}
+  .calendar-nonwork-day {color: $insensitive_fg_color;}
+  .calendar-other-month-day {
+    color: transparentize($fg_color, 0.5);
+    &.calendar-nonwork-day {
+      color: transparentize($insensitive_fg_color, 0.5);
+    }
+  }
+
+  // Today
+  .calendar-today {
+    background-color: $selected_bg_color;
+    font-weight: 800;
+    color: $selected_fg_color !important;
+
+    &:hover,&:focus {
+      background-color:lighten($selected_bg_color, 3%);
+      color: inherit;
+    }
+
+    &:active,&:selected {
+      background-color: $selected_bg_color;
+      color: inherit;
+
+      &:hover,&:focus {
+        background-color:lighten($selected_bg_color, 3%);
+        color: inherit;
+      }
+    }
+  }
+
+  .calendar-day-with-events {
+    background-image: if($variant == 'light', url("resource:///org/gnome/shell/theme/calendar-today-light.svg"),url("resource:///org/gnome/shell/theme/calendar-today.svg"));
+    background-size: contain;
+  }
+
+  .calendar-week-number {
+    @include fontsize($base_font_size - 4);
+    font-weight: bold;
+    font-feature-settings: "tnum";
+    margin: 6px;
+    padding: 0 $base_padding;
+    border-radius: 3px;
+    background-color: darken($bg_color, 2%);
+    color: $insensitive_fg_color
+  }
+}
+
+/* Events */
+.events-button {
+  @include card;
+  padding: $base_padding * 2;
+
+  .events-box {
+    spacing: $base_padding;
+  }
+
+  .events-list {
+    spacing: 2 * $base_padding;
+  }
+
+  .events-title {
+    @extend %heading;
+    color: $insensitive_fg_color;
+    margin-bottom: $base_margin;
+  }
+
+  .event-time {
+    @extend %numeric;
+    @extend %caption;
+    color: $insensitive_fg_color;
+  }
+}
+
+/* World clocks */
+.world-clocks-button {
+  @include card;
+  padding: $base_padding * 2;
+
+  .world-clocks-grid {
+    spacing-rows: $base_padding;
+    spacing-columns: $base_padding * 2;
+  }
+
+  // title
+  .world-clocks-header {
+    @extend %heading;
+    color: $insensitive_fg_color;
+  }
+
+  // city label
+  .world-clocks-city {
+    color: $fg_color;
+  }
+
+  // timezone time
+  .world-clocks-time {
+    @extend %heading;
+    @extend %numeric;
+    color: $fg_color;
+
+    &:ltr {text-align: right;}
+    &:rtl {text-align: left;}
+  }
+
+  // timezone offset label
+  .world-clocks-timezone {
+    @extend %numeric;
+    @extend %caption;
+    color: $insensitive_fg_color;
+  }
+}
+
+/* Weather */
+.weather-button {
+  @include card;
+  padding: $base_padding * 2;
+
+  .weather-box {
+    spacing: $base_padding + $base_margin;
+  }
+
+  .weather-header-box {
+    spacing: $base_padding;
+  }
+
+  .weather-header {
+    color: $insensitive_fg_color;
+    @extend %heading;
+
+    &.location {
+      font-weight: normal;
+    }
+  }
+
+  .weather-grid {
+    spacing-rows: $base_padding;
+    spacing-columns: $base_padding * 2;
+  }
+
+  .weather-forecast-time {
+    @extend %numeric;
+    @extend %caption;
+    color: darken($fg_color,30%);
+    padding-top: 0.2em;
+    padding-bottom: 0.4em;
+  }
+
+  .weather-forecast-icon {
+    icon-size: $large_icon_size;
+  }
+
+  .weather-forecast-temp {
+    @extend %heading;
+  }
+}

data/gnome-shell-sass/widgets/_check-box.scss

@@ -0,0 +1,18 @@
+/* Check Boxes */
+
+// these are equal to the size of the SVG assets
+$check_height: 24px;
+$check_width: 24px;
+
+
+.check-box {
+  StBoxLayout { spacing: .8em; }
+  StBin {
+    width: $check_width;
+    height: $check_height;
+    background-image: if($variant == 'light', url("resource:///org/gnome/shell/theme/checkbox-off-light.svg"), url("resource:///org/gnome/shell/theme/checkbox-off.svg"));
+  }
+  &:focus StBin { background-image: if($variant == 'light', url("resource:///org/gnome/shell/theme/checkbox-off-focused-light.svg"), url("resource:///org/gnome/shell/theme/checkbox-off-focused.svg"));; }
+  &:checked StBin { background-image: url("resource:///org/gnome/shell/theme/checkbox.svg"); }
+  &:focus:checked StBin { background-image: url("resource:///org/gnome/shell/theme/checkbox-focused.svg"); }
+}

data/gnome-shell-sass/widgets/_corner-ripple.scss

@@ -0,0 +1,15 @@
+/* Activities Ripple */
+
+$ripple_size: 50px;
+
+.ripple-box {
+  background-color: rgba(255,255,255,0.2);
+  box-shadow: 0 0 2px 2px rgba(255,255,255,0.2);
+  // plus + 2px for the border (box-shadow)
+  width: $ripple_size + 2px;
+  height: $ripple_size + 2px;
+  border-radius: 0 0 $ripple_size + 2px 0; // radius equals the size of the box to give us the curve
+
+  // just a simple change to the border radius position
+  &:rtl { border-radius: 0 0 0 $ripple_size + 2px; }
+}

data/gnome-shell-sass/widgets/_dash.scss

@@ -0,0 +1,75 @@
+/* Dash */
+
+$dash_background_color: lighten($system_bg_color, 5%);
+$dash_placeholder_size: 32px;
+$dash_padding: $base_padding*2; // 12px
+$dash_border_radius: $modal_radius + $dash_padding;
+
+// container for the dash
+#dash {
+  @extend %caption;
+  margin-top: $dash_padding;
+
+  .placeholder {
+    // background-image: url("resource:///org/gnome/shell/theme/dash-placeholder.svg");
+    background-image:none;
+    background-size: contain;
+    height: $dash_placeholder_size;
+  }
+
+  .empty-dash-drop-target {
+    width: $dash_placeholder_size;
+    height: $dash_placeholder_size;
+  }
+
+  // Running app indicator (also shown in app grid)
+  .app-well-app-running-dot {
+    margin-bottom: 14px; // hardcoded
+  }
+}
+
+// background of the dash behind app icons
+.dash-background {
+  background-color: $dash_background_color;
+  border-radius: $dash_border_radius;
+  padding: $dash_padding;
+  spacing: $base_padding;
+  margin-bottom: $dash_padding;
+}
+
+// items on the dash
+.dash-item-container {
+  > * {margin: 0 2px;}
+  &:ltr:first-child {margin-left: 0;}
+  &:rtl:first-child {margin-right: 0;}
+
+  // each app item on the dash
+  .app-well-app .overview-icon {
+    padding: $base_padding;
+  }
+
+  // show apps button
+  .show-apps { @include overview_icon($osd_fg_color);}
+
+  .show-apps, .app-well-app {
+    padding-bottom: $dash_padding;
+  }
+}
+
+// separator between favourites and running apps
+.dash-separator {
+  width: 1px;
+  margin: 0 $base_margin;
+  background-color: $borders_color;
+  margin-bottom: $dash_padding;
+}
+
+// OSD Tooltip
+.dash-label {
+  color: $osd_fg_color;
+  background-color: $osd_bg_color;
+  border-radius: 99px;
+  padding: $base_padding $base_padding * 2;
+  text-align: center;
+  -y-offset: $base_margin * 2; // distance from the dash edge
+}

data/gnome-shell-sass/widgets/_dialogs.scss

@@ -0,0 +1,172 @@
+/* Modal Dialogs */
+
+.headline {
+  @extend %title_4;
+}
+
+.modal-dialog {
+  @extend %bubble_panel;
+
+  .modal-dialog-content-box {
+    margin: 32px 40px;
+    spacing: 32px;
+    max-width: 28em;
+  }
+
+  .modal-dialog-linked-button {
+    @extend %bubble_button;
+  }
+}
+
+/* End Session Dialog */
+.end-session-dialog {
+  width: 30em;
+
+  .end-session-dialog-battery-warning,
+  .dialog-list-title {
+    color: $warning_color;
+  }
+}
+
+/* Message Dialog */
+.message-dialog-content {
+  spacing: 18px;
+
+  .message-dialog-title {
+    text-align: center;
+    @extend %title_2;
+
+    &.lightweight { @extend %title_4;}
+  }
+  .message-dialog-description { text-align: center; }
+}
+
+/* Dialog List */
+.dialog-list {
+  spacing: 18px;
+
+  .dialog-list-title {
+    text-align: center;
+    @extend %heading;
+  }
+
+  .dialog-list-scrollview { max-height: 200px; }
+  .dialog-list-box {
+    spacing: 1em;
+
+    .dialog-list-item {
+      spacing: 1em;
+
+      .dialog-list-item-title { font-weight: bold; }
+      .dialog-list-item-description {
+        color: darken($fg_color,5%);
+        @extend %caption;
+      }
+    }
+  }
+}
+
+/* Run Dialog */
+.run-dialog {
+  .modal-dialog-content-box {
+    margin-top: 24px;
+    margin-bottom: 14px;
+  }
+  .run-dialog-entry { width: 20em; }
+  .run-dialog-description {
+    @extend %caption;
+    text-align: center;
+    color: darken($fg_color, 20%);
+  }
+}
+
+/* Password or Authentication Dialog */
+
+.prompt-dialog {
+  width: 28em;
+
+  .modal-dialog-content-box {
+    margin-bottom: 24px;
+  }
+}
+
+.prompt-dialog-password-grid {
+  spacing-rows: 8px;
+  spacing-columns: 4px;
+
+  .prompt-dialog-password-entry {
+    width: auto;
+
+    // 4px (spacing) + 16px (spinner-width)
+    &:ltr { margin-left: 20px; }
+    &:rtl { margin-right: 20px; }
+  }
+}
+
+.prompt-dialog-password-layout {
+  spacing: 8px;
+}
+
+.prompt-dialog-password-entry {
+  width: 20em;
+}
+
+.prompt-dialog-error-label,
+.prompt-dialog-info-label,
+.prompt-dialog-null-label {
+  text-align: center;
+  @extend %caption;
+}
+
+.prompt-dialog-error-label {
+  color: $warning_color;
+}
+
+
+/* Polkit Dialog */
+
+.polkit-dialog-user-layout {
+  text-align: center;
+  spacing: 8px;
+  margin-bottom: 6px;
+
+  .polkit-dialog-user-root-label { color: $warning_color; }
+}
+
+/* Audio selection dialog */
+.audio-device-selection-dialog {
+  .modal-dialog-content-box { margin-bottom: 28px; }
+  .audio-selection-box { spacing: 20px; }
+}
+
+.audio-selection-device {
+  border-radius: $base_border_radius*2;
+  &:hover,&:focus { background-color: $hover_bg_color; }
+  &:active { 
+    background-color: $selected_bg_color;
+    color: $selected_fg_color;
+  }
+}
+
+.audio-selection-device-box {
+  padding: 20px;
+  spacing: 20px;
+}
+
+.audio-selection-device-icon {
+  icon-size: $base_icon_size * 4;
+}
+
+/* Welcome dialog */
+.welcome-dialog-image {
+  background-image: url("resource:///org/gnome/shell/theme/gnome-shell-start.svg");
+  background-size: contain;
+  /* Reasonable maximum dimensions */
+  height: 300px;
+  width: 300px;
+}
+
+/* Access portal dialog */
+.access-dialog {
+  text-align: center;
+}

data/gnome-shell-sass/widgets/_entries.scss

@@ -0,0 +1,31 @@
+/* Entries */
+
+StEntry {
+  border-radius: $base_border_radius;
+  padding: 8px;
+  color: $fg_color;
+
+  @include entry(normal);
+  &:hover { @include entry(hover);}
+  &:focus { @include entry(focus);}
+  &:insensitive { @include entry(insensitive);}
+
+  selection-background-color: $selected_bg_color;
+  selected-color: $selected_fg_color;
+
+  StIcon.capslock-warning {
+    icon-size: 16px;
+    warning-color: $warning_color;
+    padding: 0 4px;
+  }
+
+  StIcon.peek-password {
+    icon-size: $base_icon_size;
+    padding: 0 4px;
+  }
+
+  StLabel.hint-text {
+    margin-left: 2px;
+    color: transparentize($fg_color, 0.3);
+  }
+}

data/gnome-shell-sass/widgets/_hotplug.scss

@@ -0,0 +1,10 @@
+// hotplug
+
+.hotplug-notification-item {
+  @extend %bubble_button;
+}
+
+.hotplug-notification-item-icon {
+  icon-size: 24px;
+  padding: 0 4px;
+}

data/gnome-shell-sass/widgets/_ibus-popup.scss

@@ -0,0 +1,39 @@
+// IBus Candidate Popup
+
+.candidate-popup-boxpointer {
+  @extend .popup-menu-boxpointer;
+}
+
+.candidate-popup-content {
+  padding: $base_padding;
+  spacing: $base_padding;
+  @extend .popup-menu-content;
+}
+
+.candidate-index {
+  padding: 0;
+  padding-right: $base_padding;
+  color: $insensitive_fg_color;
+}
+
+.candidate-box {
+  padding: $base_padding $base_padding*2 $base_padding $base_padding*2;
+  border-radius: $base_border_radius;
+  &:selected { background-color: $selected_bg_color; color: $selected_fg_color; }
+  &:hover { background-color: $hover_bg_color; color: $hover_fg_color; }
+}
+
+.candidate-page-button-box {
+  height: 2em;
+  .vertical & { padding-top: $base_padding*2; }
+  .horizontal & { padding-left: $base_padding*2; }
+}
+
+.candidate-page-button {
+  padding: $base_padding;
+
+  & StIcon { icon-size: $base_icon_size; }
+}
+
+.candidate-page-button-previous { border-radius: $base_border_radius 0px 0px $base_border_radius; border-right-width: 0;box-shadow: none;}
+.candidate-page-button-next { border-radius: 0px $base_border_radius $base_border_radius 0px;box-shadow: none;}

data/gnome-shell-sass/widgets/_keyboard.scss

@@ -0,0 +1,159 @@
+/* On-screen Keyboard */
+
+$key_size: 1.2em;
+$key_border_radius: $base_border_radius + 4px; // 12px
+$key_bg_color:  darken($osd_fg_color, 70%);
+// $default_key_bg_color: darken($key_bg_color, 4%);
+$default_key_bg_color: if($variant=='light', darken($key_bg_color, 11%), darken($key_bg_color, 10%));
+
+
+// draw keys using button function
+#keyboard {
+  // background-color: transparentize(if($variant=='light', darken($bg_color, 5%), darken($bg_color, 8%)), 0.1);
+  background-color: $osd_bg_color;
+  box-shadow: inset 0 1px 0 0 $osd_outer_borders_color;
+
+  .page-indicator {
+    padding: $base_padding;
+
+    .page-indicator-icon {
+      width: 8px;
+      height: 8px;
+    }
+  }
+}
+
+// the container for individual keys
+.key-container {
+  padding: $base_margin;
+  spacing: $base_margin;
+}
+
+// the keys
+.keyboard-key {
+
+  @include fontsize($base_font_size + 5);
+  font-weight: bold;
+  min-height: $key_size;
+  min-width: $key_size;
+  border-width: 1px;
+  border-style: solid;
+  border-radius: $key_border_radius;
+  box-shadow: 0 1px 0 0 $shadow_color;
+
+  @include keyboard_key(normal, $key_bg_color, $osd_fg_color);
+
+  &:focus { @include keyboard_key(focus);}
+  &:hover { @include keyboard_key(hover, $key_bg_color, $osd_fg_color);}
+  &:active { @include keyboard_key(active, $key_bg_color, $osd_fg_color); }
+  &:checked { @include keyboard_key(checked, $key_bg_color, $osd_fg_color); }
+
+  &:grayed { //FIXMEy
+    background-color: darken($bg_color, 3%);
+    color: $osd_fg_color;
+    border-color: $osd_borders_color;
+  }
+
+  // non-character keys
+  &.default-key {
+    @include keyboard_key(normal, $default_key_bg_color, $osd_fg_color);
+    &:hover {@include keyboard_key(hover, $default_key_bg_color, $osd_fg_color);}
+    &:active { @include keyboard_key(active, $default_key_bg_color, $osd_fg_color);}
+    &:checked { @include keyboard_key(checked, $default_key_bg_color, $osd_fg_color);}
+    border-radius: $key_border_radius;
+
+    // keys that may be latched: ctrl/alt/shift
+    &:latched {
+      border-color: lighten($selected_bg_color, 5%);
+      background-color: $selected_bg_color;
+    }
+  }
+
+  // enter key is suggested-action
+  &.enter-key {
+    @include keyboard_key(normal, $selected_bg_color, $selected_fg_color);
+    &:hover { @include keyboard_key(hover, $selected_bg_color, $selected_fg_color);}
+    &:active {@include keyboard_key(active, $selected_bg_color, $selected_fg_color);}
+    &:checked {@include keyboard_key(checked, $selected_bg_color, $selected_fg_color);}
+    border-radius: $key_border_radius;
+    color: $osd_fg_color;
+  }
+
+  &.shift-key-lowercase {}
+  
+  // pressed shift has different style
+  &.shift-key-uppercase { 
+    background-color: lighten($key_bg_color, 20%);
+    color: $osd_bg_color;
+    &:hover {
+      background-color: lighten($key_bg_color, 25%);
+      color: lighten($osd_bg_color, 5%);
+    }
+  }
+
+  // size of icons on keys
+  StIcon { icon-size: 24px; }
+}
+
+// long press on a key popup
+.keyboard-subkeys {
+  -arrow-border-radius: $base_border_radius*2;
+  -arrow-background-color: $osd_bg_color;
+  -arrow-border-width: 1px;
+  -arrow-border-color: lighten($osd_bg_color, 9%);
+  -arrow-base: 20px;
+  -arrow-rise: 10px;
+  -boxpointer-gap: $base_padding;
+  padding: $base_padding;
+
+  .keyboard-key {
+    @include keyboard_key(normal, $key_bg_color, $osd_fg_color);
+
+    &:focus { @include keyboard_key(focus);}
+    &:hover { @include keyboard_key(hover, $key_bg_color, $osd_fg_color);}
+    &:active { @include keyboard_key(active, $key_bg_color, $osd_fg_color); }
+    &:checked { @include keyboard_key(checked, $key_bg_color, $osd_fg_color); }
+
+    border-radius:$key_border_radius;
+  }
+}
+
+// emoji
+.emoji-page {
+  .keyboard-key {
+    background-color: transparent;
+    border: none;
+    color: initial;
+  }
+}
+
+.emoji-panel {
+  .keyboard-key:latched {
+    border-color: lighten($selected_bg_color, 5%);
+    background-color: $selected_bg_color;
+  }
+}
+
+// suggestions
+.word-suggestions {
+  @include fontsize($base_font_size + 1);
+  spacing: 12px;
+  min-height: 17pt;
+  padding: $base_padding*2;
+  color: $osd_fg_color;
+
+  // each suggestion
+  StButton {
+    margin: 0 3px;
+    min-width: 32px;
+    border-radius: $base_border_radius - 2px;
+    padding: 0px $base_padding*3;
+
+    @include keyboard_key(undecorated, $key_bg_color, $osd_fg_color);
+
+    &:focus { @include keyboard_key(focus);}
+    &:hover { @include keyboard_key(hover, $key_bg_color, $osd_fg_color);}
+    &:active { @include keyboard_key(active, $key_bg_color, $osd_fg_color); }
+    &:checked { @include keyboard_key(checked, $key_bg_color, $osd_fg_color); }
+  }
+}

data/gnome-shell-sass/widgets/_login-dialog.scss

@@ -0,0 +1,201 @@
+/* Login Dialog */
+
+.login-dialog-banner-view {
+  padding-top: 24px;
+  max-width: 23em;
+}
+
+.login-dialog,
+.unlock-dialog {
+  //reset
+  border: none;
+  background-color: transparent;
+
+  $_gdm_bg: $system_bg_color;
+
+  .modal-dialog-button-box { spacing: 3px; }
+  .modal-dialog-button {
+    padding: 4px 18px;
+    background-color: darken($system_bg_color, 3%);
+    border-color: darken($system_bg_color, 3%);
+    color: $osd_fg_color;
+
+    $_hover_c: lighten($_gdm_bg, 5%);
+    &:hover, &:focus {
+      background-color: $_hover_c;
+      border-color: $_hover_c;
+    }
+    &:active {
+      $_active_c: darken($_gdm_bg, 5%);
+      background-color: $_active_c;
+      border-color: $_active_c;
+    }
+    &:insensitive {
+      @include button(insensitive);
+      border-color: darken($_gdm_bg, 5%);
+      background-color: darken($_gdm_bg, 5%);
+      color: transparentize($osd_fg_color, 0.3);
+    }
+    &:default {
+      @include button(default);
+    }
+  }
+
+  .cancel-button,
+  .switch-user-button,
+  .login-dialog-session-list-button {
+    padding: 0;
+    border-radius: 99px;
+    width: $large_icon_size;
+    height: $large_icon_size;
+    border-color: darken($system_bg_color, 3%);
+    background-color: darken($system_bg_color, 3%);
+
+    StIcon { icon-size: $base_icon_size; }
+  }
+
+  .caps-lock-warning-label,
+  .login-dialog-message-warning {
+    color: $osd_fg_color;
+  }
+}
+
+.login-dialog-logo-bin { padding: 24px 0px; }
+.login-dialog-banner { color: darken($osd_fg_color,10%); }
+.login-dialog-button-box { width: 23em; spacing: 5px; }
+.login-dialog-message { text-align: center; }
+.login-dialog-user-selection-box { padding: 100px 0px; }
+.login-dialog-not-listed-label {
+  padding-left: 2px;
+  .login-dialog-not-listed-button:focus &,
+  .login-dialog-not-listed-button:hover & {
+    color: $osd_fg_color;
+  }
+}
+
+.login-dialog-not-listed-label {
+  @extend %caption;
+  font-weight: bold;
+  color: darken($osd_fg_color,30%);
+  padding-top: 1em;
+}
+
+.login-dialog-auth-list-view { -st-vfade-offset: 1em; }
+.login-dialog-auth-list {
+  spacing: 6px;
+  margin-left: 2em;
+}
+
+.login-dialog-auth-list-title {
+  margin-left: 2em;
+}
+
+.login-dialog-auth-list-item {
+  border-radius: $base_border_radius + 4px;
+  padding: 6px;
+  color: darken($osd_fg_color,30%);
+  &:focus, &:selected { background-color: $selected_bg_color; color: $selected_fg_color; }
+}
+
+.login-dialog-auth-list-label {
+  @include fontsize($base_font_size + 2);
+  font-weight: bold;
+  padding-left: 15px;
+  &:ltr { padding-left: 14px; text-align: left; }
+  &:rtl { padding-right: 14px; text-align: right; }
+}
+
+.login-dialog-user-list-view { -st-vfade-offset: 1em; }
+.login-dialog-user-list {
+  spacing: 12px;
+  width: 23em;
+  &:expanded .login-dialog-user-list-item:selected { background-color: $selected_bg_color; color: $selected_fg_color; }
+  &:expanded .login-dialog-user-list-item:logged-in { border-right: 2px solid $selected_bg_color; }
+}
+
+.login-dialog-user-list-item {
+  border-radius: $base_border_radius + 4px;
+  padding: 6px;
+  color: darken($osd_fg_color,30%);
+  &:ltr .user-widget { padding-right: 1em; }
+  &:rtl .user-widget { padding-left: 1em; }
+  .login-dialog-timed-login-indicator {
+    height: 2px;
+    margin-top: 6px;
+    background-color: $osd_fg_color;
+  }
+  &:focus .login-dialog-timed-login-indicator { background-color: $selected_fg_color; }
+}
+
+.user-widget-label {
+  color: $osd_fg_color;
+}
+
+.user-widget.horizontal .user-widget-label {
+  @include fontsize($base_font_size + 2);
+  font-weight: bold;
+  padding-left: 15px;
+
+  &:ltr { padding-left: 14px; text-align: left; }
+  &:rtl { padding-right: 14px; text-align: right; }
+}
+
+.user-widget.vertical .user-widget-label {
+  @include fontsize($base_font_size + 5);
+  text-align: center;
+  font-weight: normal;
+  padding-top: 16px;
+}
+
+.login-dialog-timed-login-indicator {
+    height: 2px;
+    background-color: darken($fg_color,40%);
+}
+
+.login-dialog-prompt-layout {
+  padding-top: 24px;
+  padding-bottom: 12px;
+  spacing: $base_padding * 2;
+  width: 23em;
+}
+
+.login-dialog-prompt-entry {
+  height: 1.5em;
+}
+
+.login-dialog-prompt-label {
+  color: darken($osd_fg_color, 20%);
+  @include fontsize($base_font_size + 1);
+  padding-top: 1em;
+}
+
+.login-dialog {
+  StEntry {
+    @if $variant=='dark' {
+      $_gdm_entry_bg: darken($system_bg_color, 3%);
+      background-color: $_gdm_entry_bg;
+      color: $fg_color;
+    }
+  }
+}
+
+// Custom styling for unlock entry
+.unlock-dialog {
+  StEntry {
+    border:none !important;
+    &:focus { 
+      background-color: transparentize($fg_color, 0.9);
+    }
+    &:insensitive { 
+      color: transparentize($fg_color, 0.5);
+      background-color: transparentize($fg_color, 0.95);
+    }
+  }
+
+  .cancel-button,
+  .switch-user-button,
+  .login-dialog-session-list-button {
+    border-color: transparent;
+    background-color: transparentize($fg_color, 0.9);
+  }
+}

data/gnome-shell-sass/widgets/_looking-glass.scss

@@ -0,0 +1,144 @@
+/* Looking Glass */
+
+// Dialog
+#LookingGlassDialog {
+  background-color: $osd_bg_color;
+  border-radius: 0 0 $modal_radius $modal_radius;
+  border-top-width: 0;
+  border: 1px solid $osd_outer_borders_color;
+  color: $osd_fg_color;
+  padding: $base_padding;
+  spacing: $base_padding;
+  box-shadow: 0 2px 4px 0 $shadow_color;
+
+  & > #Toolbar {
+    border: none;
+    padding: $base_padding;
+    border-radius: 0;
+    background-color: transparent;
+    spacing: $base_padding;
+
+    .lg-toolbar-button {
+      padding: $base_padding $base_padding*2;
+      @extend %button;
+
+      & > StIcon { icon-size: $base_icon_size; }
+    }
+  }
+
+  .labels { 
+    spacing: $base_padding;
+  }
+
+  .notebook-tab {
+    -natural-hpadding: $base_padding*2;
+    -minimum-hpadding: $base_padding*2;
+
+    font-weight: bold;
+    padding: $base_padding $base_padding*2;
+    color: darken($osd_fg_color, 15%);
+    transition-duration: 100ms;
+    box-shadow:none;
+    border:none;
+    border-radius: $base_border_radius - 2px;
+    background-color: transparent;
+
+    &:hover {
+      color: $osd_fg_color;
+      background-color: transparentize($osd_fg_color, 0.95);
+    }
+
+    &:selected {
+      color: $osd_fg_color;
+      background-color: transparentize($osd_fg_color, 0.9);
+    }
+  }
+
+  StBoxLayout#EvalBox { padding: 4px; spacing: $base_padding; padding: $base_padding; }
+  StBoxLayout#ResultsArea { spacing: $base_padding; padding: $base_padding; }
+}
+
+.lg-dialog {
+
+  StEntry {
+    background-color: transparentize(lighten($osd_bg_color, 5%), 0.4);
+    color: $osd_fg_color;
+    border-color: transparentize($osd_fg_color, 0.8);
+    min-height: 22px;
+    selection-background-color: $selected_bg_color;
+    selected-color: $selected_fg_color;
+  }
+
+  .shell-link {
+    color: $link_color;
+    &:hover { color: lighten($link_color, 10%); }
+    &:active { color: darken($link_color, 10%); }
+   }
+
+  .actor-link {
+    color: $insensitive_fg_color;
+    &:hover { color: lighten($insensitive_fg_color, 20%); }
+    &:active { color: darken($insensitive_fg_color, 20%); }
+
+    & StIcon { icon-size: 12px; }
+   }
+}
+
+.lg-completions-text {
+  @extend %caption;
+  font-style: italic;
+}
+
+.lg-obj-inspector-title {
+  spacing: $base_padding;
+}
+
+.lg-obj-inspector-button {
+  border: 1px solid $osd_borders_color;
+  padding: 4px;
+  border-radius: $base_border_radius;
+  &:hover { border: 1px solid #ffffff; }
+}
+
+// Extensions
+#lookingGlassExtensions { padding: $base_padding; }
+
+.lg-extensions-list {
+  padding: $base_padding;
+  spacing: $base_padding;
+}
+
+.lg-extension {
+  padding: $base_padding*2;
+  @include card;
+}
+
+.lg-extension-name {
+  @extend %heading;
+}
+
+.lg-extension-meta {
+  spacing: $base_padding;
+}
+
+// Inspector
+#LookingGlassPropertyInspector {
+  background: $osd_bg_color;
+  border: 1px solid $osd_borders_color;
+  border-radius: $base_border_radius;
+  padding: $base_padding;
+}
+
+.lg-debug-flag-button {
+  StLabel { padding: $base_padding, 2 * $base_padding; }
+
+  color: $fg_color;
+  &:hover { color: lighten($fg_color, 20%); }
+  &:active { color: darken($fg_color, 20%); }
+}
+
+.lg-debug-flags-header {
+  padding-top: 2 * $base_padding;
+  padding: $base_padding;
+  @extend %title_2;
+}

data/gnome-shell-sass/widgets/_message-list.scss

@@ -0,0 +1,180 @@
+/* Message List */
+// a.k.a. notifications in the menu
+
+// main list
+.message-list {
+  width: 29em;
+  border: solid $borders_color;
+
+  // padding and margins to account for scrollbar
+  &:ltr {margin-left: 0; margin-right: $base_margin; padding-right: $base_padding; border-right-width: 1px; }
+  &:rtl {margin-right: 0; margin-left: $base_margin; padding-left: $base_padding; border-left-width: 1px; }
+
+  .message-list-placeholder { 
+    @extend %title_2;
+    color: transparentize($insensitive_fg_color, .5);
+
+    // icon size and color
+    > StIcon {
+      icon-size: $base_icon_size*3; // 48px
+      margin-bottom: $base_margin*3;
+      -st-icon-style: symbolic;
+    }
+  }
+}
+
+.message-list-sections {
+  spacing: $base_padding;
+  margin: 0; 
+  padding-bottom: $base_padding;
+
+  // to account for scrollbar
+  &:ltr {margin-right: $base_margin * 3; }
+  &:rtl {margin-left: $base_margin * 3;}
+}
+
+.message-list-section,
+.message-list-section-list {
+  spacing: $base_padding;
+}
+
+// do-not-disturb + clear button
+.message-list-controls {
+  // NOTE: remove the padding if notification_bubble could remove margin for drop shadow
+  padding: $base_padding;
+  spacing: $base_padding;
+  @extend %heading;
+
+  .dnd-button {
+    // We need this because the focus outline isn't inset like for the buttons
+    // so the dnd button would grow when it gets focus if we didn't change only
+    // its color when focusing.
+    border-width: 2px;
+    border-color: transparent;
+    border-radius: 32px;
+    border-style: solid;
+
+    &:focus {
+      border-color: transparentize($selected_bg_color, 0.4);
+    }
+  }
+}
+
+// message bubbles
+.message {
+  @include card;
+
+  // icon container
+  .message-icon-bin {
+    padding: ($base_padding * 3);
+
+    &:ltr {padding-right:$base_padding;}
+    &:rtl {padding-left:$base_padding;}
+
+    // icon size and color
+    > StIcon {
+      icon-size: $large_icon_size; // 32px
+      -st-icon-style: symbolic;
+    }
+
+    // fallback
+    > .fallback-app-icon {
+      width: $base_icon_size;
+      height: $base_icon_size;
+    }
+  }
+
+  // content
+  .message-content {
+    spacing: 4px;
+    padding: ($base_padding*1.5);
+    margin-bottom: $base_margin*2;
+  }
+
+  // title
+  .message-title {
+    font-weight: bold;
+    /* HACK: the label should be baseline-aligned with a 1em label, fake this with some bottom padding */
+    padding-top: 0.57em;
+  }
+
+  // secondary container in title box
+  .message-secondary-bin {
+    padding: 0 $base_margin * 2;
+
+    // notification time stamp
+    > .event-time {
+      color: transparentize($fg_color, 0.5);
+      @include fontsize($base_font_size - 2);
+      /* HACK: the label should be baseline-aligned with a 1em label, fake this with some bottom padding */
+      padding-bottom: 0.13em;
+
+      &:ltr { text-align: right };
+      &:rtl { text-align: left };
+    }
+  }
+
+  // close button
+  .message-close-button {
+    color: $fg_color;
+    background-color: transparentize($fg_color, 0.9);
+    border-radius: 99px;
+    padding: $base_padding - 1px;
+    margin: 1px;
+    &:hover {background-color: transparentize($fg_color, 0.8);}
+    &:active {background-color: transparentize($fg_color, 0.9);}
+
+    & StIcon { icon-size: $base_icon_size; }
+  }
+
+  // body
+  .message-body {color: darken($fg_color, 10%);}
+}
+
+// URLs in messages
+.url-highlighter {
+  link-color: $link_color;
+}
+
+/* Media Controls */
+.message-media-control {
+  padding: 0 $base_padding*3;
+  margin: $base_padding*2 0;
+  border-radius: $base_border_radius;
+  color: $fg_color;
+
+  // colors are lightened since the media controls are in a card
+  &:hover {
+    background-color: lighten($hover_bg_color, 5%);
+    color: $fg_color;
+  }
+
+  &:active { 
+    background-color: lighten($active_bg_color, 5%);
+    color: $fg_color;
+  }
+
+  &:insensitive { color: lighten($insensitive_fg_color, 5%); }
+  
+  // fix margin for last button
+  &:last-child:ltr { margin-right: $base_margin*3; }
+  &:last-child:rtl { margin-left: $base_margin*3; }
+
+  & StIcon { icon-size: $base_icon_size; }
+}
+
+// album-art
+.media-message-cover-icon {
+  icon-size: $base_icon_size*3 !important; // 48px
+  border-radius: $base_border_radius;
+
+  // when there is no artwork
+  &.fallback {
+    color: darken($fg_color, 17%);
+    background-color: $bg_color;
+    border: 1px solid transparent;
+    border-radius: $base_border_radius;
+    icon-size: $large_icon_size !important; // 32px
+    padding: ($base_padding*2 + 2); // 16px
+  }
+}

data/gnome-shell-sass/widgets/_misc.scss

@@ -0,0 +1,65 @@
+// Rubberband for select-area screenshots
+.select-area-rubberband {
+  background-color: transparentize($selected_bg_color,0.7);
+  border: 1px solid $selected_bg_color;
+}
+
+// User icon
+.user-icon {
+  background-size: contain;
+  color: $osd_fg_color;
+  border-radius: 99px;
+  icon-size: $base_icon_size * 4; // 64px
+  &:hover {
+    color: lighten($osd_fg_color,30%);
+  }
+
+  & StIcon {
+    background-color: transparentize($osd_fg_color,0.95);
+    border-radius: 99px;
+    padding: $base_padding * 2 ; // 12px
+    width: $base_icon_size * 2.5; height:  $base_icon_size * 2.5; // 40px;
+  }
+
+  &.user-avatar {
+    border: 2px $osd_fg_color;
+  }
+}
+
+.user-widget.vertical .user-icon {
+  icon-size: $base_icon_size * 6; // 128px
+
+  & StIcon {
+    padding: $base_padding * 3 + 2px; // 20px
+    padding-top: $base_padding * 3; // 18 px
+    padding-bottom: $base_padding * 3 + 4px; // 22px
+    width: $base_icon_size * 5.5; height:  $base_icon_size * 5.5; // 88px;
+  }
+}
+
+.lightbox { background-color: black; }
+.flashspot { background-color: white; }
+
+
+// Hidden
+.hidden { color: rgba(0,0,0,0);}
+
+// Caps-lock warning
+.caps-lock-warning-label {
+  text-align: center;
+  padding-bottom: 8px;
+  @extend %caption;
+  color: $warning_color;
+}
+
+/* Workspace animation */
+
+.workspace-animation {
+  background-color: $system_bg_color;
+}
+
+/* Tiled window previews */
+.tile-preview {
+  background-color: transparentize($selected_bg_color,0.5);
+  border: 1px solid $selected_bg_color;
+}

data/gnome-shell-sass/widgets/_notifications.scss

@@ -0,0 +1,61 @@
+/* Notifications & Message Tray */
+
+$notification_banner_height: 64px;
+$notification_banner_width: 34em;
+$notification_banner_radius: $base_border_radius*1.5;
+
+// Banner notifications
+.notification-banner {
+  min-height: $notification_banner_height;
+  width: $notification_banner_width;
+  box-shadow: 0 2px 4px 2px $shadow_color;
+  border-radius: $notification_banner_radius;
+  margin: $base_margin;
+
+  .notification-actions {
+    spacing: 0;
+  }
+
+  .notification-button {
+    @extend %bubble_button;
+  }
+}
+
+// counter
+.summary-source-counter {
+  font-size: $base_font_size - 1pt;
+  font-weight: bold;
+  height: 1.6em;
+  width: 1.6em;
+  -shell-counter-overlap-x: 3px;
+  -shell-counter-overlap-y: 3px;
+  background-color: $selected_bg_color;
+  color: $selected_fg_color;
+  border: 2px solid $fg_color;
+  box-shadow: 0 2px 2px rgba(0,0,0,0.5);
+  border-radius: 0.9em; // should be 0.8 but whatever; wish I could do 50%;
+}
+
+// chat bubbles
+.chat-body { spacing: 5px; }
+.chat-response { margin: 5px; }
+.chat-log-message { color: darken($fg_color,10%); }
+.chat-new-group { padding-top: 1em; }
+.chat-received {
+  padding-left: 4px;
+  &:rtl { padding-left: 0px; padding-right: 4px; }
+}
+
+.chat-sent {
+  padding-left: 18pt;
+  color: lighten($fg_color, 15%);
+  &:rtl { padding-left: 0; padding-right: 18pt; }
+}
+
+.chat-meta-message {
+  padding-left: 4px;
+  @include fontsize($base_font_size - 2);
+  font-weight: bold;
+  color: lighten($fg_color,18%);
+  &:rtl { padding-left: 0; padding-right: 4px; }
+}

data/gnome-shell-sass/widgets/_osd.scss

@@ -0,0 +1,64 @@
+/* OSD */
+
+$osd_levelbar_height:6px;
+
+.osd-window {
+  @extend %osd_panel;
+  @extend %heading;
+  text-align: center;
+  font-weight: bold;
+  spacing: $base_padding * 2; // 12px
+  padding: $base_padding * 2 $base_padding * 3;
+  & > * { spacing: 8px; }
+  margin-bottom: 4em;
+
+  StIcon { icon-size:$large_icon_size;}
+
+  StLabel {
+    &:ltr { margin-right: 6px; }
+    &:rtl { margin-left: 6px; }
+  }
+
+  .level {
+    margin-bottom: 4px;
+    &:first-child { margin-bottom: 0px; }
+
+    height: $osd_levelbar_height;
+    min-width:$base_icon_size * 10;
+    -barlevel-height: $osd_levelbar_height;
+    -barlevel-background-color: transparentize($osd_fg_color, if($variant=='light', 0.7, 0.9));
+    -barlevel-active-background-color: $osd_fg_color;
+    -barlevel-overdrive-color: $destructive_color;
+    -barlevel-overdrive-separator-width: 3px;
+    &:ltr { margin-right: 6px; }
+    &:rtl { margin-left: 6px; }
+  }
+}
+
+// Monitor number label
+.osd-monitor-label { 
+  @extend %osd_panel;
+  border-radius: $modal_radius;
+  font-size: 3em;
+  font-weight: bold;
+  margin: $base_margin * 3;
+  text-align: center;
+  min-width: 1.3em;
+}
+
+/* Pad OSD */
+.pad-osd-window {
+  padding: 32px;
+  background-color: transparentize(#000, 0.2);
+
+  .pad-osd-title-box { spacing: 12px; }
+  .pad-osd-title-menu-box { spacing: 6px; }
+}
+
+.combo-box-label {
+  width: 15em;
+}
+
+.resize-popup {
+  @extend %osd_panel;
+}

data/gnome-shell-sass/widgets/_overview.scss

@@ -0,0 +1,13 @@
+/* OVERVIEW */
+
+.controls-manager, .secondary-monitor-workspaces {
+  spacing: $base_padding * 2;
+}
+
+#overviewGroup {
+  background-color: $system_bg_color;
+}
+
+.overview-controls {
+  padding-bottom: 32px;
+}

data/gnome-shell-sass/widgets/_panel.scss

@@ -0,0 +1,233 @@
+/* Top Bar */
+// a.k.a. the panel
+
+$panel_bg_color: #000;
+$panel_fg_color: if($variant == 'light', lighten($bg_color, 10%), darken($fg_color, 5%));
+$panel_height: 2.2em;
+$panel_transition_duration: 250ms; // same as the overview transition duration
+
+#panel {
+  background-color: $panel_bg_color;
+  font-weight: bold;
+  height: $panel_height;
+  @extend %numeric;
+  transition-duration: $panel_transition_duration;
+
+  // transparent panel on lock & login screens
+  &.unlock-screen,
+  &.login-screen,
+  &:overview {
+    background-color: transparent;
+  }
+
+  // panel menus
+  .panel-button {
+    font-weight: bold;
+    color: $panel_fg_color;
+    -natural-hpadding: $base_padding * 2;
+    -minimum-hpadding: $base_padding;
+    transition-duration: 150ms;
+    border: 3px solid transparent;
+    border-radius: 99px;
+
+    &.clock-display {
+      .clock {
+        transition-duration: 150ms;
+        border: 3px solid transparent;
+        border-radius: 99px;
+      }
+    }
+
+    &.screen-recording-indicator {
+      box-shadow: inset 0 0 0 100px $screenshot_ui_button_red;
+    }
+    &.screen-sharing-indicator {
+      box-shadow: inset 0 0 0 100px $warning_color;
+      StBoxLayout { margin: 0 $base_padding; }
+    }
+
+    &.screen-recording-indicator,
+    &.screen-sharing-indicator {
+      StBoxLayout {
+        spacing: $base_padding;
+      }
+
+      StIcon {
+        icon-size: $base_icon_size;
+      }
+    }
+
+    &:active, &:overview, &:focus, &:checked {
+      box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.8);
+
+      // The clock display needs to have the background on .clock because
+      // we want to exclude the do-not-disturb indicator from the background
+      &.clock-display {
+        box-shadow: none;
+
+        .clock {
+          box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.8);
+        }
+      }
+
+      &.screen-recording-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.15);
+      }
+      &.screen-sharing-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.15);
+      }
+    }
+
+    &:hover {
+      box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.85);
+      &.clock-display {
+        box-shadow: none;
+        .clock {
+          box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.85);
+        }
+      }
+
+      &.screen-recording-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.1);
+      }
+      &.screen-sharing-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.1);
+      }
+    }
+    
+    &:active:hover, &:overview:hover, &:focus:hover, &:checked:hover {
+      box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.75);
+      &.clock-display {
+        box-shadow: none;
+        .clock {
+          box-shadow: inset 0 0 0 100px transparentize($panel_fg_color, 0.75);
+        }
+      }
+
+      &.screen-recording-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.2);
+      }
+      &.screen-sharing-indicator {
+        box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.2);
+      }
+    }
+
+    // status area icons
+    .system-status-icon {
+      icon-size: $base_icon_size;
+      padding: $base_padding - 1px;
+      margin: 0 $base_margin;
+    }
+
+    .panel-status-indicators-box .system-status-icon,
+    .panel-status-menu-box .system-status-icon {
+      margin: 0;
+    }
+
+    // app menu icon
+    .app-menu-icon {
+      -st-icon-style: symbolic;
+      // dimensions of the icon are hardcoded
+    }
+
+    &#panelActivities {
+      -natural-hpadding: $base_padding * 3;
+    }
+  }
+
+  &.unlock-screen,
+  &.login-screen,
+  &:overview {
+    .panel-button {
+      &:active, &:overview, &:focus, &:checked {
+        box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.15);
+
+        &.clock-display {
+          box-shadow: none;
+
+          .clock {
+            box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.15);
+          }
+        }
+
+        &.screen-recording-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.15);
+        }
+        &.screen-sharing-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.15);
+        }
+      }
+
+      &:hover {
+        box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.10);
+        &.clock-display {
+          box-shadow: none;
+          .clock {
+            box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.10);
+          }
+        }
+
+        &.screen-recording-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.1);
+        }
+        &.screen-sharing-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.1);
+        }
+      }
+      
+      &:active:hover, &:overview:hover, &:focus:hover, &:checked:hover {
+        box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.2);
+        &.clock-display {
+          box-shadow: none;
+          .clock {
+            box-shadow: inset 0 0 0 100px rgba(255,255,255, 0.2);
+          }
+        }
+
+        &.screen-recording-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($screenshot_ui_button_red, 0.2);
+        }
+        &.screen-sharing-indicator {
+          box-shadow: inset 0 0 0 100px transparentize($warning_color, 0.2);
+        }
+      }
+    }
+  }
+
+  .panel-status-indicators-box,
+  .panel-status-menu-box {
+    spacing: 2px;
+  }
+
+  // spacing between power icon and (optional) percentage label
+  .power-status.panel-status-indicators-box {
+    spacing: 0;
+  }
+
+  // indicator for active
+  .screencast-indicator,
+  .remote-access-indicator { color: $warning_color; }
+}
+
+// App Menu
+#appMenu {
+  spacing: $base_padding;
+  .label-shadow { color: transparent; }
+}
+
+#appMenu .panel-status-menu-box {
+  padding: 0 $base_padding;
+  spacing: $base_padding;
+}
+
+
+// Clock
+
+.clock-display-box {
+  spacing: 2px;
+
+  .clock {
+    padding-left: $base_padding * 2;
+    padding-right: $base_padding * 2;
+  }
+}

data/gnome-shell-sass/widgets/_popovers.scss

@@ -0,0 +1,182 @@
+/* Popovers/Menus */
+
+// the popover itself
+.popup-menu-boxpointer {
+  -arrow-rise: $base_margin+2px; // distance from the panel & screen edge
+}
+
+// container of the popover menu
+.popup-menu {
+  min-width: 15em;
+  color: $fg_color;
+
+  //.popup-status-menu-item {font-weight: normal;  color: pink;} //dunno what that is
+  &.panel-menu {
+    margin-bottom: 1.75em; // so it doesn't touch the bottom of the screen
+  }
+}
+
+// popover content
+.popup-menu-content {
+  padding: $base_padding;
+  border-radius: $modal_radius*1.25;
+  border: 1px solid $borders_edge;
+  box-shadow: 0 2px 4px 0 $shadow_color;
+  background-color: $bg_color;
+}
+
+// menu items
+.popup-menu-item {
+  padding: $base_padding*1.5 $base_padding*2;
+  border-radius: $base_border_radius*1.5;
+  spacing: $base_padding;
+  transition-duration: 100ms;
+  background-color: transparent;
+
+  &:ltr {padding-left: $base_padding;}
+  &:rtl {padding-right: $base_padding;}
+
+  &:focus, &:hover {
+    background-color: $hover_bg_color !important;
+    &:active { background-color: $active_bg_color !important;}
+  }
+
+  &:checked {background-color: $checked_bg_color !important;}
+
+  &:checked {
+    margin-bottom: 0;
+    box-shadow: inset 0 -1px 0 0 darken($checked_bg_color, 5%);
+    border-radius: $base_border_radius $base_border_radius 0 0;
+    &:focus,&:hover { background-color: lighten($checked_bg_color, 3%) !important;}
+    &:active { background-color: lighten($checked_bg_color, 5%) !important;}
+  }
+
+  &:active {
+    background-color: lighten($active_bg_color, 5%);
+    color: $active_fg_color;
+  }
+
+  &:insensitive {color: transparentize($fg_color,0.5);}
+
+  // add margin to switches in menu items
+  .toggle-switch {
+    &:ltr { margin-left: $base_margin;}
+    &:rtl { margin-right: $base_margin;}
+  }
+}
+
+
+// all other graphical elements (sliders)
+.popup-inactive-menu-item {
+  color: $fg_color;
+  &:insensitive { color: $insensitive_fg_color; }
+}
+
+// symbolic icons in popover
+.popup-menu-arrow,
+.popup-menu-icon {
+  icon-size: 16px !important; // for some reason the variable doesn't work here
+}
+
+.popup-menu-arrow {
+}
+
+
+// popover submenus
+.popup-sub-menu {
+  background-color: $checked_bg_color;
+  border-radius: 0 0 $base_border_radius $base_border_radius;
+
+  .popup-menu-ornament {
+    min-width: $base_icon_size !important;
+  }
+
+  // submenu specific styles
+  .popup-menu-item {
+    border-radius: 0;
+    margin: 0;
+
+    &:last-child {
+      border-radius: 0 0 $base_border_radius $base_border_radius;
+    }
+
+    &:focus,&:hover { background-color: $hover_bg_color !important;}
+    &:checked {
+      background-color: $checked_bg_color !important;
+      &:focus,&:hover { background-color: lighten($checked_bg_color, 8%) !important;}
+    }
+    &:active { background-color: $active_bg_color !important;}
+  }
+
+  .popup-menu-section {
+    .popup-menu-item:last-child {
+      &:hover,&:focus { border-radius: 0;}
+    }
+    &:last-child .popup-menu-item:last-child {
+      border-radius: 0 0 $base_border_radius $base_border_radius;
+    }
+  }
+}
+
+// container for radio and check boxes
+.popup-menu-ornament {
+  @extend %heading;
+  width: 1.2em;
+  text-align: center !important;
+
+  &:ltr { text-align: right;}
+  &:rtl { text-align: left;}
+}
+
+// separator
+.popup-separator-menu-item {
+  margin: 6px 0;
+  padding:0 !important;
+  &:ltr { margin-right: $base_margin;}
+  &:rtl { margin-left: $base_margin;}
+
+  .popup-separator-menu-item-separator {
+    height: 1px; //not really the whole box
+    background-color: $borders_color;
+  }
+
+  .popup-menu-ornament {
+    width: 0 !important;
+  }
+
+  // separators in submenus
+  .popup-sub-menu & {
+    background-color: transparent;
+
+    // account for ornament
+    &:ltr { margin-right: 2.5em;}
+    &:rtl { margin-left: 2.5em;}
+
+    .popup-separator-menu-item-separator {
+      background-color: lighten($borders_color, 7%);
+    }
+  }
+}
+
+// desktop background menu
+.background-menu {
+  -boxpointer-gap: 0px;
+  -arrow-rise: 0px; // hide the beak on the menu
+}
+
+// right-click (and panel) app menu
+.app-menu {
+  max-width: 27.25em;
+
+  // this is unneeded at the top-level in this menu, hide it
+  .popup-menu-ornament { width: 0 !important; }
+
+  .popup-inactive-menu-item:first-child {
+    // "Open Windows" label
+    > StLabel {
+      @extend %caption_heading;
+      &:ltr {margin-right: $base_margin*2;}
+      &:rtl {margin-left: $base_margin*2;}
+    }
+  }
+}

data/gnome-shell-sass/widgets/_quick-settings.scss

@@ -0,0 +1,109 @@
+.quick-settings {
+  padding: 4 * $base_padding;
+}
+
+.quick-settings-grid {
+  spacing-rows: 3 * $base_padding;
+  spacing-columns: 2 * $base_padding;
+}
+
+.quick-toggle {
+  border-radius: 99px;
+  min-width: 11.5em;
+  max-width: 11.5em;
+  min-height: 44px;
+
+  &:checked { @include button(default); }
+
+  & > StBoxLayout { spacing: $base_padding; }
+
+  /* Move padding into the box; this is to allow menu arrows
+     to extend to the border */
+  &.button { padding: 0; }
+  & > StBoxLayout { padding: 0 2 * $base_padding; }
+
+  .quick-toggle-label { font-weight: bold; }
+  .quick-toggle-icon, .quick-toggle-arrow { icon-size: $base_icon_size; }
+}
+
+.quick-menu-toggle {
+  &:ltr > StBoxLayout { padding-right: 0; }
+  &:rtl > StBoxLayout { padding-left: 0; }
+
+  & .quick-toggle-arrow {
+    background-color: transparentize($fg_color, 0.9);
+    padding: 8px;
+
+    &:ltr { border-radius: 0 99px 99px 0; }
+    &:rtl { border-radius: 99px 0 0 99px; }
+  }
+}
+
+.quick-slider {
+  padding: 0 $base_padding;
+
+  & > StBoxLayout { spacing: $base_padding; }
+
+  .slider-bin {
+    &:focus {@include button(focus);}
+    min-height: 16px; // slider size
+    padding: $base_padding;
+    border-radius: 99px;
+  }
+  .quick-toggle-icon { icon-size: $base_icon_size; }
+  .icon-button { background-color: transparent; }
+}
+
+.quick-toggle-menu {
+  background-color: $card_bg_color;
+  border-radius: $base_border_radius*2.75;
+  padding: $base_padding*2.75;
+  margin: 0 $base_padding*2.75;
+
+  & .header {
+    spacing-rows: 0.5 * $base_padding;
+    spacing-columns: $base_padding*2;
+    padding-bottom: 2 * $base_padding;
+
+    & .icon {
+      icon-size: $base_icon_size*1.5; // a non-standard symbolic size but ok
+      border-radius: 999px;
+      padding: 1.5 * $base_padding;
+      background-color: lighten($bg_color, 10%);
+
+      &.active { background-color: $selected_bg_color; }
+    }
+
+    & .title {
+      @extend %title_3;
+    }
+
+    & .subtitle {
+      @extend %caption_heading;
+    }
+  }
+}
+
+.quick-toggle-menu-container {
+  padding: 2 * $base_padding $base_padding 0;
+ }
+
+.quick-settings-system-item {
+  & > StBoxLayout { spacing: 2 * $base_padding; }
+
+  .icon-button > StIcon { -st-icon-style: symbolic; }
+
+  & .power-item {
+    min-height: 0;
+    min-width: 0;
+
+    &:insensitive {
+      @include button(normal);
+      background-color: transparent;
+    }
+  }
+}
+
+.nm-network-item {
+  .wireless-secure-icon { icon-size: 0.5 * $base_icon_size; }
+}

data/gnome-shell-sass/widgets/_screen-shield.scss

@@ -0,0 +1,78 @@
+/* Screen Shield */
+
+.unlock-dialog-clock {
+  color: white;
+  font-weight: 300;
+  text-align: center;
+  spacing: 24px;
+  padding-bottom: 2.5em;
+}
+
+.unlock-dialog-clock-time {
+  font-size: 64pt;
+  padding-top: 42px;
+  @extend %numeric;
+}
+
+.unlock-dialog-clock-date {
+  font-size: 16pt;
+  font-weight: normal;
+}
+
+.unlock-dialog-clock-hint {
+  font-weight: normal;
+  padding-top: 48px;
+}
+
+.unlock-dialog-notifications-container {
+  margin: 12px;
+  spacing: 6px;
+  width: 23em;
+  background-color: transparent;
+
+  .summary-notification-stack-scrollview {
+    padding-top: 0;
+    padding-bottom: 0;
+  }
+
+  .notification,
+  .unlock-dialog-notification-source {
+    padding: 12px 16px;
+    border: none;
+    background-color: transparentize($osd_fg_color,0.9);
+    color: $osd_fg_color;
+    border-radius: $modal_radius;
+
+    &.critical { background-color: transparentize($osd_fg_color,0.8) }
+  }
+}
+
+.unlock-dialog-notification-label {
+  padding-left: 12px;
+  padding-right: 0;
+  &:rtl { padding-right: 12px; padding-left: 0; }
+}
+
+.unlock-dialog-notification-count-text {
+  font-weight: bold;
+  padding: 0 12px;
+  color: $osd_fg_color;
+  background-color: transparentize($osd_fg_color, 0.9);
+  border-radius: 99px;
+}
+
+.screen-shield-background { //just the shadow, really
+  background: black;
+  box-shadow: 0 2px 4px rgba(0,0,0,0.6);
+}
+
+#lockDialogGroup {
+  background-color: $system_bg_color;
+}
+#unlockDialogNotifications {
+  StButton#vhandle, StButton#hhandle {
+    background-color: transparentize($bg_color,0.7);
+    &:hover, &:focus { background-color: transparentize($bg_color,0.5); }
+    &:active { background-color: transparentize($selected_bg_color,0.5); }
+  }
+}

data/gnome-shell-sass/widgets/_screenshot.scss

@@ -0,0 +1,203 @@
+// Screenshot UI
+.icon-label-button-container {
+  spacing: $base_padding;
+  @extend %caption;
+
+  StIcon { icon-size: 32px;}
+}
+
+$screenshot_ui_panel_padding: $base_padding*3;
+$screenshot_ui_shot_cast_margin: 21px;
+$screenshot_ui_panel_border_radius: $modal_radius + $screenshot_ui_shot_cast_margin;
+$screenshot_ui_shot_cast_spacing: 3px;
+
+$screenshot_ui_button_red: $error_color;
+
+.screenshot-ui-panel {
+  @extend %osd_panel;
+  border-radius: $screenshot_ui_panel_border_radius;
+  padding: $screenshot_ui_panel_padding;
+  // Reduce the bottom padding a little to accommodate the large capture button.
+  padding-bottom: $screenshot_ui_panel_padding - 6px;
+  margin-bottom: 4em;
+  spacing: $base_padding * 2;
+}
+
+.screenshot-ui-close-button {
+  @extend .window-close; // copy window close button
+  padding: $base_padding !important; // but with more padding
+  margin-top: 12px;
+  box-shadow: 0 2px 4px 0 $shadow_color;
+  &.left { margin-left: 12px;}
+  &.right { margin-right: 12px;}
+}
+
+.screenshot-ui-type-button {
+  @extend %osd_button;
+  min-width: 48px;
+  padding: $base_padding * 2 $base_padding * 3 !important;
+  border-radius: $screenshot_ui_panel_border_radius - $screenshot_ui_panel_padding;
+}
+
+.screenshot-ui-capture-button {
+  width: 36px;
+  height: 36px;
+  border-radius: 99px;
+  border: 4px $osd_fg_color;
+  padding: 4px;
+
+  .screenshot-ui-capture-button-circle {
+    background-color: $osd_fg_color;
+    transition-duration: 200ms;
+    &:hover, &:focus { background-color: $hover_bg_color;}
+    border-radius: 99px;
+  }
+
+  &:hover, &:focus {
+    .screenshot-ui-capture-button-circle {
+      background-color: darken($osd_fg_color, 15%);
+    }
+  }
+
+  &:active {
+    .screenshot-ui-capture-button-circle {
+      background-color: darken($osd_fg_color, 50%);
+    }
+  }
+
+  &:cast {
+    .screenshot-ui-capture-button-circle {
+      background-color: $screenshot_ui_button_red;
+    }
+    &:hover, &:focus {
+      .screenshot-ui-capture-button-circle {
+        background-color: lighten($screenshot_ui_button_red, 5%);
+      }
+    }
+    &:active {
+      .screenshot-ui-capture-button-circle {
+        background-color: darken($screenshot_ui_button_red, 7%);
+      }
+    }
+  }
+}
+
+.screenshot-ui-shot-cast-container {
+  background-color: lighten($osd_bg_color,5%);
+  border-radius: $modal_radius;
+  padding: $screenshot_ui_shot_cast_spacing;
+  spacing: $screenshot_ui_shot_cast_spacing;
+
+  &:ltr { margin-left: $screenshot_ui_shot_cast_margin - $screenshot_ui_panel_padding;}
+  &:rtl { margin-right: $screenshot_ui_shot_cast_margin - $screenshot_ui_panel_padding;}
+}
+
+.screenshot-ui-shot-cast-button {
+  padding: $base_padding $base_padding*2;
+  background-color: transparent;
+  &:hover, &:focus { background-color: lighten($osd_bg_color, 10%);}
+  &:active { background-color: lighten($active_bg_color,5%);}
+  &:checked { background-color: white;color: black;}
+
+  border-radius: $modal_radius - $screenshot_ui_shot_cast_spacing;
+
+  StIcon { icon-size: $base_icon_size;}
+}
+
+.screenshot-ui-show-pointer-button {
+  @extend %osd_button;
+  border-radius: 99px;
+  padding: $base_padding * 2 !important;
+  StIcon { icon-size: $base_icon_size;}
+}
+
+.screenshot-ui-area-indicator-shade {
+  background-color: rgba(0,0,0,.3);
+}
+
+.screenshot-ui-area-selector {
+  .screenshot-ui-area-indicator-shade {
+    background-color: rgba(0,0,0,.5);
+  }
+
+  .screenshot-ui-area-indicator-selection {
+    border: 2px white;
+  }
+}
+
+.screenshot-ui-area-selector-handle {
+  border-radius: 99px;
+  background-color: white;
+  box-shadow: 0 1px 3px 2px rgba(0,0,0,0.2);
+  width: 24px;
+  height: 24px;
+}
+
+.screenshot-ui-window-selector {
+  background-color: $system_bg_color;
+
+  .screenshot-ui-window-selector-window-container {
+    margin: 100px;
+  }
+
+  &:primary-monitor {
+    .screenshot-ui-window-selector-window-container {
+      // Make some room for the panel.
+      margin-bottom: 200px;
+    }
+  }
+}
+
+.screenshot-ui-window-selector-window-border {
+  transition-duration: 200ms;
+  border-radius: $modal_radius;
+  border: 6px transparent;
+}
+
+.screenshot-ui-window-selector-check {
+  transition-duration: 200ms;
+  color: transparent;
+  border-radius: 99px;
+  border-width: 12px;
+  icon-size: 24px;
+}
+
+.screenshot-ui-window-selector-window {
+  &:hover {
+    .screenshot-ui-window-selector-window-border {
+      border-color: darken($selected_bg_color, 15%);
+    }
+  }
+  &:checked {
+    .screenshot-ui-window-selector-window-border {
+      border-color: $selected_bg_color;
+      background-color: transparentize($selected_bg_color, 0.8);
+    }
+
+    .screenshot-ui-window-selector-check {
+      color: $selected_fg_color;
+      background-color: $selected_bg_color;
+    }
+  }
+}
+
+.screenshot-ui-screen-selector {
+  transition-duration: 200ms;
+  background-color: rgba(0,0,0,.5);
+
+  &:hover { background-color: rgba(0,0,0,.3);}
+  &:active { background-color: rgba(0,0,0,.7);}
+  &:checked {
+    background-color: transparent;
+    border: 2px white;
+  }
+}
+
+.screenshot-ui-tooltip {
+  color: $osd_fg_color;
+  background-color: $osd_bg_color;
+  border-radius: 99px;
+  padding: $base_padding $base_padding * 2;
+  text-align: center;
+  -y-offset: 24px;
+}

data/gnome-shell-sass/widgets/_scrollbars.scss

@@ -0,0 +1,29 @@
+/* Scrollbars */
+
+StScrollView {
+  &.vfade { -st-vfade-offset: 68px; }
+  &.hfade { -st-hfade-offset: 68px; }
+}
+
+StScrollBar {
+  padding: 0;
+
+  StScrollView & {
+    min-width: 8px;
+    min-height: 8px;
+  }
+
+  StBin#trough {
+    border-radius: 0;
+    background-color: transparent;
+  }
+
+  StButton#vhandle, StButton#hhandle {
+    border-radius: 8px;
+    background-color: mix($fg_color, $bg_color, 30%);
+    border: 3px solid transparent; //would be nice to margin or at least to transparent
+    transition: 500ms all ease;
+    &:hover {background-color: mix($fg_color, $bg_color, 50%);}
+    &:active {background-color: mix($fg_color, $bg_color, 40%);}
+  }
+}

data/gnome-shell-sass/widgets/_search-entry.scss

@@ -0,0 +1,26 @@
+// Search entry
+
+$search_entry_width: 320px;
+$search_entry_height: 36px;
+
+%search_entry,
+.search-entry {
+  border-radius: $search_entry_height * 0.5; // half the height
+
+  margin-top: $base_padding * 2;
+  margin-bottom: $base_padding;
+  padding: $base_padding+1 $base_padding+3;
+  width: $search_entry_width;
+
+  @include entry(normal);
+  &:hover { @include entry(hover);}
+  &:focus { @include entry(focus);}
+  &:insensitive { @include entry(insensitive);}
+
+  .search-entry-icon {
+    color: inherit;
+    icon-size: $base_icon_size;
+    margin-top: 2px; // center vertically
+    padding: 0 4px;
+  }
+}

data/gnome-shell-sass/widgets/_search-results.scss

@@ -0,0 +1,96 @@
+/* Search */
+
+// search overview container
+#searchResults {
+  margin: 0 $base_margin;
+}
+
+#searchResultsContent {
+  max-width: 1072px;
+}
+
+// search results sections "the boxes"
+.search-section {
+  // This should be equal to #searchResultsContent spacing
+  spacing: $base_padding*3;
+
+  // separator (unstyled)
+  .search-section-separator { 
+    height: $base_margin*2; // use it as a spacer
+    background-color: transparent;
+  }
+}
+
+// content
+.search-section-content {
+  background-color: lighten($system_bg_color, 5%);
+  border-radius: $modal_radius*1.5;
+  border: 1px solid $osd_outer_borders_color;
+  color: $osd_fg_color;
+  padding: $base_padding*2;
+  margin:0 $base_margin*3;
+}
+
+%search_section_content_item {
+  @include tile_button($osd_fg_color);
+  border-radius: $base_border_radius+3px;
+}
+
+// "no results" text
+.search-statustext {
+  @extend %title_1;
+}
+
+.grid-search-results {
+  spacing: $base_padding*5;
+  margin:0 $base_margin*3;
+}
+
+// Search results with icons
+.grid-search-result {
+  @extend .app-well-app;
+}
+
+// search result provider
+.search-provider-icon {
+  @extend %search_section_content_item;
+  &:ltr {margin-right: $base_margin;}
+  &:rtl {margin-left: $base_margin;}
+
+  // content
+  .list-search-provider-content {
+    spacing: $base_padding * 2;
+
+    // provider labels
+    .list-search-provider-details {
+      width: 120px;
+      color: $osd_fg_color;
+    }
+  }
+}
+
+// search results list
+.list-search-results {
+  spacing: $base_padding;
+}
+
+// search result listitem
+.list-search-result {
+  @extend %search_section_content_item;
+
+  // content
+  .list-search-result-content {
+    spacing: $base_padding;
+  }
+
+  // list item title (with leading icon)
+  .list-search-result-title {
+    spacing: $base_padding * 2;
+    // font-weight: bold;
+  }
+
+  // list item description
+  .list-search-result-description {
+    color: $osd_insensitive_fg_color;
+  }
+}

data/gnome-shell-sass/widgets/_slider.scss

@@ -0,0 +1,22 @@
+/* Slider */
+
+$slider_size: 16px;
+
+.slider {
+  // slider trough
+  -barlevel-height: 4px;
+  -barlevel-background-color: if($variant == 'light', transparentize($fg_color, 0.6), transparentize($fg_color, 0.8)); //background of the trough
+  -barlevel-border-width: 2px; 
+  -barlevel-border-color: transparent; // trough border color
+  // fill style
+  -barlevel-active-background-color: $selected_bg_color;
+  -barlevel-active-border-color: transparent;
+  // overfill style (red in this case)
+  -barlevel-overdrive-color: $destructive_color;
+  -barlevel-overdrive-border-color: transparent; //trough border when red;
+  -barlevel-overdrive-separator-width:1px;
+  // slider handler
+  -slider-handle-radius: $slider_size * 0.5; // half the size of the size
+  -slider-handle-border-width: 0;
+  -slider-handle-border-color: transparent; // because 0 width
+}

data/gnome-shell-sass/widgets/_switcher-popup.scss

@@ -0,0 +1,72 @@
+/* App Switcher */
+
+// same as dash
+$switcher_padding: $base_padding + 4px; // 10px
+$switcher_border_radius: $modal_radius + 8px;
+
+
+// the full screen container of the switcher
+.switcher-popup {
+  padding: 0;
+  spacing: $base_padding * 4;
+}
+
+// switcher onscreen panel
+.switcher-list {
+  @extend %osd_panel;
+  padding: $switcher_padding;
+  border-radius: $switcher_border_radius;
+  box-shadow: 0 8px 8px 0 rgba(0,0,0,0.1);
+
+  // container for items in list
+  .switcher-list-item-container {
+    spacing: $base_padding * 2;
+  }
+
+  // each item in the list
+  .item-box {
+    @include tile_button($osd_fg_color);
+    // override over style so mouse doesn't steal focus
+    &:hover {background: none;}
+  }
+
+  .separator {
+    width: 1px;
+    background: $borders_color;
+  }
+
+  // container of thumbnails
+  .thumbnail-box {
+    padding: 2px;
+    spacing: $base_padding;
+  }
+
+  // window thumbnail itself
+  .thumbnail {
+    width: 256px; // equal to THUMBNAIL_DEFAULT_SIZE in altTab.js
+    border-radius:$base_border_radius;
+  }
+}
+
+// arrow if app has multiple windows
+.switcher-arrow {
+  border-color: transparentize($osd_fg_color, 0.2);
+  color: transparentize($osd_fg_color, 0.2);
+
+  &:highlighted {
+    border-color: $osd_fg_color;
+    color: $osd_fg_color;
+  }
+}
+
+// Input Source Switcher
+.input-source-switcher-symbol {
+  font-size: 34pt;
+  width: 96px;
+  height: 96px;
+}
+
+// Window cycler highlight
+.cycler-highlight {
+  border: 5px solid $selected_bg_color;
+}

data/gnome-shell-sass/widgets/_switches.scss

@@ -0,0 +1,16 @@
+/* Switches */
+
+// these are equal to the size of the SVG assets
+$switch_height: 26px;
+$switch_width: 48px;
+
+.toggle-switch {
+  color: $fg_color;
+  height: $switch_height;
+  width: $switch_width;
+  background-size: contain;
+  background-image: if($variant == 'light', url("resource:///org/gnome/shell/theme/toggle-off-light.svg"),url("resource:///org/gnome/shell/theme/toggle-off.svg"));
+  &:checked { 
+    background-image: if($variant == 'light', url("resource:///org/gnome/shell/theme/toggle-on-light.svg"),url("resource:///org/gnome/shell/theme/toggle-on.svg"));
+  }
+}

data/gnome-shell-sass/widgets/_window-picker.scss

@@ -0,0 +1,53 @@
+/* Window Picker */
+
+$window_picker_spacing: $base_padding; // 6px
+$window_picker_padding: $base_padding * 2; // 12px
+
+$window_thumbnail_label_color: transparentize($osd_bg_color, 0.4);
+
+$window_close_button_color: transparentize(lighten($osd_bg_color, 7%), .02);
+$window_close_button_size: 30px;
+$window_close_button_padding: 3px;
+
+// Window picker
+.window-picker {
+  // Space between window thumbnails
+  spacing: $window_picker_spacing;
+}
+
+// Window titles
+.window-caption {
+  color: $osd_fg_color;
+  background-color: lighten($osd_bg_color, 5%);
+  border-radius: 99px;
+  padding: $base_padding $base_padding * 2;
+}
+
+// Close button
+.window-close {
+  background-color: $window_close_button_color;
+  color: $osd_fg_color;
+  border-radius: 99px;
+  box-shadow: 0 2px 4px 0 $shadow_color;
+  padding: $window_close_button_padding;
+  height: $window_close_button_size;
+  width: $window_close_button_size;
+  transition-duration: 100ms;
+
+  & StIcon { icon-size: 24px; } // uses non standard icon size
+
+  &:hover {
+    background-color: lighten($window_close_button_color, 7%);
+  }
+
+  &:active {
+    background-color: lighten($window_close_button_color, 13%);
+  }
+}
+
+.workspace-background {
+  // keep in sync with BACKGROUND_CORNER_RADIUS_PIXELS in workspace.js
+  border-radius: 30px;
+  background-color: $invisible_occluded_bg_color;
+  box-shadow: 0 4px 16px 4px transparentize(darken($osd_bg_color, 30%), 0.7);
+}

data/gnome-shell-sass/widgets/_workspace-switcher.scss

@@ -0,0 +1,25 @@
+/* Workspace Switcher */
+
+$ws_indicator_height: $large_icon_size;
+$ws_dot_active: $ws_indicator_height / 3;
+$ws_dot_inactive: $ws_indicator_height / 6;
+
+.workspace-switcher {
+  @extend %osd_panel;
+  margin-bottom: 4em;
+  spacing: $base_padding * 2;
+  padding: $base_padding * 2 $base_padding * 3;
+}
+
+.ws-switcher-indicator {
+  background-color: transparentize($osd_fg_color,0.5);
+  padding: $ws_dot_inactive / 2;
+  margin: ($ws_indicator_height - $ws_dot_inactive) / 2;
+  border-radius: $ws_indicator_height;
+
+  &:active {
+    background-color: $osd_fg_color;
+    padding: $ws_dot_active / 2;
+    margin: ($ws_indicator_height - $ws_dot_active) / 2;
+  }
+}

data/gnome-shell-sass/widgets/_workspace-thumbnails.scss

@@ -0,0 +1,28 @@
+/* Workspace pager */
+
+// thumbnails in overview
+.workspace-thumbnails {
+  visible-width: 32px; //amount visible before hover
+  spacing: $base_padding;
+  padding: $base_padding;
+
+  .workspace-thumbnail {
+    @extend %overview_panel;
+    border-radius: 3px;
+  }
+
+  // drag and drop indicator
+  .placeholder {
+    background-image: url("resource:///org/gnome/shell/theme/workspace-placeholder.svg");
+    background-size: contain;
+    width: 18px;
+  }
+}
+
+// selected indicator
+.workspace-thumbnail-indicator {
+  border: 3px solid $selected_bg_color;
+  border-radius: 3px;
+  padding: 0px;
+  // background-color: transparentize($selected_bg_color, 0.9);
+}

data/meson.build

@@ -0,0 +1,113 @@
+session_desktop_base = 'gnome-classic'
+
+session_desktops = [
+  session_desktop_base,
+  session_desktop_base + '-xorg',
+  session_desktop_base + '-wayland',
+]
+
+foreach name: session_desktops
+    session_desktop = name + '.desktop'
+    if name.endswith('-xorg')
+        session_instdir = xsessiondir
+    elif name.endswith('-wayland')
+        session_instdir = wlsessiondir
+    else
+        # FIXME: The same target can not be copied into two directories.
+        #        There is a workaround in meson/session-post-install.py until proper
+        #        solution arises:
+        #        https://github.com/mesonbuild/meson/issues/2416
+        session_instdir = xsessiondir
+        #session_instdir = [ xesssiondir, wlsessiondir ]
+    endif
+    i18n.merge_file(
+      input:  session_desktop + '.in',
+      output: session_desktop,
+      po_dir: '../po',
+      install: true,
+      install_dir: session_instdir,
+      type: 'desktop'
+    )
+endforeach
+
+classic_uuids = []
+foreach e : classic_extensions
+    classic_uuids += e + uuid_suffix
+endforeach
+
+mode_conf = configuration_data()
+mode_conf.set('CLASSIC_EXTENSIONS', '"' + '", "'.join(classic_uuids) + '"')
+
+mode_file = 'classic.json'
+configure_file(
+  input: mode_file + '.in',
+  output: mode_file,
+  configuration: mode_conf,
+  install_dir: modedir
+)
+
+theme_sources = files(
+  'gnome-shell-sass/_colors.scss',
+  'gnome-shell-sass/_common.scss',
+  'gnome-shell-sass/_drawing.scss',
+  'gnome-shell-sass/_high-contrast-colors.scss',
+  'gnome-shell-sass/_widgets.scss',
+  'gnome-shell-sass/widgets/_a11y.scss',
+  'gnome-shell-sass/widgets/_app-grid.scss',
+  'gnome-shell-sass/widgets/_base.scss',
+  'gnome-shell-sass/widgets/_buttons.scss',
+  'gnome-shell-sass/widgets/_calendar.scss',
+  'gnome-shell-sass/widgets/_check-box.scss',
+  'gnome-shell-sass/widgets/_corner-ripple.scss',
+  'gnome-shell-sass/widgets/_dash.scss',
+  'gnome-shell-sass/widgets/_dialogs.scss',
+  'gnome-shell-sass/widgets/_entries.scss',
+  'gnome-shell-sass/widgets/_hotplug.scss',
+  'gnome-shell-sass/widgets/_ibus-popup.scss',
+  'gnome-shell-sass/widgets/_keyboard.scss',
+  'gnome-shell-sass/widgets/_login-dialog.scss',
+  'gnome-shell-sass/widgets/_looking-glass.scss',
+  'gnome-shell-sass/widgets/_message-list.scss',
+  'gnome-shell-sass/widgets/_misc.scss',
+  'gnome-shell-sass/widgets/_notifications.scss',
+  'gnome-shell-sass/widgets/_osd.scss',
+  'gnome-shell-sass/widgets/_overview.scss',
+  'gnome-shell-sass/widgets/_panel.scss',
+  'gnome-shell-sass/widgets/_popovers.scss',
+  'gnome-shell-sass/widgets/_quick-settings.scss',
+  'gnome-shell-sass/widgets/_screen-shield.scss',
+  'gnome-shell-sass/widgets/_scrollbars.scss',
+  'gnome-shell-sass/widgets/_search-entry.scss',
+  'gnome-shell-sass/widgets/_search-results.scss',
+  'gnome-shell-sass/widgets/_slider.scss',
+  'gnome-shell-sass/widgets/_switcher-popup.scss',
+  'gnome-shell-sass/widgets/_switches.scss',
+  'gnome-shell-sass/widgets/_window-picker.scss',
+  'gnome-shell-sass/widgets/_workspace-switcher.scss',
+  'gnome-shell-sass/widgets/_workspace-thumbnails.scss'
+)
+
+theme_data = [
+  'classic-process-working.svg',
+  'gnome-classic-high-contrast.css'
+]
+
+stylesheet = 'gnome-classic.css'
+if fs.exists(stylesheet)
+  install_data(stylesheet, install_dir: themedir)
+else
+  sassc = find_program('sassc', required: true)
+  custom_target(stylesheet,
+    input: fs.replace_suffix(stylesheet, '.scss'),
+    output: stylesheet,
+    depend_files: theme_sources,
+    command: [sassc, '-a', '@INPUT@', '@OUTPUT@'],
+    install: true,
+    install_dir: themedir
+  )
+endif
+
+install_data(theme_data, install_dir: themedir)
+
+classic_override = '00_org.gnome.shell.extensions.classic.gschema.override'
+install_data(classic_override, install_dir: schemadir)

data/org.gnome.shell.extensions.classic-overrides.gschema.xml

@@ -1,46 +0,0 @@
-<schemalist>
-  <schema id="org.gnome.shell.extensions.classic-overrides"
-          path="/org/gnome/shell/extensions/classic-overrides/"
-	  gettext-domain="gnome-shell-extensions">
-    <key name="attach-modal-dialogs" type="b">
-      <default>true</default>
-      <summary>Attach modal dialog to the parent window</summary>
-      <description>
-        This key overrides the key in org.gnome.mutter when running
-        GNOME Shell.
-      </description>
-    </key>
-
-    <key name="button-layout" type="s">
-      <default>"appmenu:minimize,maximize,close"</default>
-      <summary>Arrangement of buttons on the titlebar</summary>
-      <description>
-        This key overrides the key in org.gnome.desktop.wm.preferences when running GNOME Shell.
-      </description>
-    </key>
-
-    <key name="edge-tiling" type="b">
-      <default>true</default>
-      <summary>Enable edge tiling when dropping windows on screen edges</summary>
-      <description>
-        This key overrides the key in org.gnome.mutter when running GNOME Shell.
-      </description>
-    </key>
-
-    <key name="workspaces-only-on-primary" type="b">
-      <default>true</default>
-      <summary>Workspaces only on primary monitor</summary>
-      <description>
-        This key overrides the key in org.gnome.mutter when running GNOME Shell.
-      </description>
-    </key>
-
-    <key name="focus-change-on-pointer-rest" type="b">
-      <default>true</default>
-      <summary>Delay focus changes in mouse mode until the pointer stops moving</summary>
-      <description>
-        This key overrides the key in org.gnome.mutter when running GNOME Shell.
-      </description>
-    </key>
-  </schema>
-</schemalist>

export-zips.sh

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+srcdir=`dirname $0`
+srcdir=`(cd $srcdir && pwd)`
+
+builddir=`mktemp -p $srcdir -d _build.XXXXXX` || exit 1
+installdir=`mktemp -p $srcdir -d _install.XXXXXX` || exit 1
+
+meson setup --prefix=$installdir -Dextension_set=all $srcdir $builddir
+meson install -C $builddir
+
+rm -rf $srcdir/zip-files
+mkdir $srcdir/zip-files
+
+extensiondir=$installdir/share/gnome-shell/extensions
+schemadir=$installdir/share/glib-2.0/schemas
+
+for f in $extensiondir/*; do
+  name=`basename ${f%%@*}`
+  uuid=$name@gnome-shell-extensions.gcampax.github.com
+  schema=$schemadir/org.gnome.shell.extensions.$name.gschema.xml
+
+  olddomain=gnome-shell-extensions
+  newdomain=gnome-shell-extension-$name
+  sed -i "/gettext-domain/ s:$olddomain:$newdomain:" $f/metadata.json
+
+  xgettext --from-code=UTF-8 --output-dir=$builddir --output=$name.pot $f/*.js
+
+  if [ -f $builddir/$name.pot ]; then
+    mkdir $f/po
+    for l in $(<$srcdir/po/LINGUAS); do
+      msgmerge --quiet --output-file=$f/po/$l.po \
+        $srcdir/po/$l.po $builddir/$name.pot
+    done
+  fi
+
+  cp $srcdir/NEWS $srcdir/COPYING $f
+  sources=(NEWS COPYING $(cd $f; ls *.js))
+
+  [ -f $schema ] || unset schema
+
+  gnome-extensions pack ${sources[@]/#/--extra-source=} \
+    ${schema:+--schema=$schema} --out-dir=$srcdir/zip-files $f
+done
+
+rm -rf $builddir
+rm -rf $installdir

extension.mk

@@ -1,18 +0,0 @@
-include $(top_srcdir)/include.mk
-
-dist_extension_DATA = extension.js stylesheet.css $(EXTRA_MODULES)
-nodist_extension_DATA = metadata.json $(top_srcdir)/lib/convenience.js $(EXTRA_EXTENSION)
-
-EXTRA_DIST = metadata.json.in
-
-metadata.json: metadata.json.in $(top_builddir)/config.status
-	$(AM_V_GEN) sed \
-            -e "s|[@]extension_id@|$(EXTENSION_ID)|" \
-	    -e "s|[@]uuid@|$(uuid)|" \
-	    -e "s|[@]gschemaname@|$(gschemaname)|" \
-	    -e "s|[@]gettext_domain@|$(GETTEXT_PACKAGE)|" \
-	    -e "s|[@]shell_current@|$(SHELL_VERSION)|" \
-	    -e "s|[@]url@|$(extensionurl)|" \
-	    $< > $@
-
-CLEANFILES = metadata.json

extensions/Makefile.am

@@ -1,3 +0,0 @@
-DIST_SUBDIRS = $(ALL_EXTENSIONS)
-
-SUBDIRS = $(ENABLED_EXTENSIONS)

extensions/Makefile.in

@@ -1,619 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = extensions
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-DIST_SUBDIRS = $(ALL_EXTENSIONS)
-SUBDIRS = $(ENABLED_EXTENSIONS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign extensions/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign extensions/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	check-am clean clean-generic cscopelist-am ctags ctags-am \
-	distclean distclean-generic distclean-tags distdir dvi dvi-am \
-	html html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags tags-am uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

extensions/alternate-tab/Makefile.am

@@ -1,5 +0,0 @@
-EXTENSION_ID = alternate-tab
-
-EXTRA_MODULES = prefs.js
-
-include ../../extension.mk

extensions/alternate-tab/Makefile.in

@@ -1,547 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = extensions/alternate-tab
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(dist_extension_DATA) \
-	$(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(extensiondir)" \
-	"$(DESTDIR)$(extensiondir)"
-DATA = $(dist_extension_DATA) $(nodist_extension_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/../../extension.mk $(srcdir)/Makefile.in \
-	$(top_srcdir)/include.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTENSION_ID = alternate-tab
-EXTRA_MODULES = prefs.js
-extensionurl = http://git.gnome.org/gnome-shell-extensions
-
-# Change these to modify how installation is performed
-topextensiondir = $(datadir)/gnome-shell/extensions
-extensionbase = @gnome-shell-extensions.gcampax.github.com
-gschemabase = org.gnome.shell.extensions
-uuid = $(EXTENSION_ID)$(extensionbase)
-gschemaname = $(gschemabase).$(EXTENSION_ID)
-extensiondir = $(topextensiondir)/$(uuid)
-dist_extension_DATA = extension.js stylesheet.css $(EXTRA_MODULES)
-nodist_extension_DATA = metadata.json $(top_srcdir)/lib/convenience.js $(EXTRA_EXTENSION)
-EXTRA_DIST = metadata.json.in
-CLEANFILES = metadata.json
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign extensions/alternate-tab/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign extensions/alternate-tab/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_extensionDATA: $(dist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-dist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-install-nodist_extensionDATA: $(nodist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-nodist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(extensiondir)" "$(DESTDIR)$(extensiondir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_extensionDATA \
-	install-nodist_extensionDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_extensionDATA \
-	uninstall-nodist_extensionDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_extensionDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-nodist_extensionDATA install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dist_extensionDATA uninstall-nodist_extensionDATA
-
-.PRECIOUS: Makefile
-
-
-metadata.json: metadata.json.in $(top_builddir)/config.status
-	$(AM_V_GEN) sed \
-            -e "s|[@]extension_id@|$(EXTENSION_ID)|" \
-	    -e "s|[@]uuid@|$(uuid)|" \
-	    -e "s|[@]gschemaname@|$(gschemaname)|" \
-	    -e "s|[@]gettext_domain@|$(GETTEXT_PACKAGE)|" \
-	    -e "s|[@]shell_current@|$(SHELL_VERSION)|" \
-	    -e "s|[@]url@|$(extensionurl)|" \
-	    $< > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

extensions/alternate-tab/extension.js

@@ -1,59 +0,0 @@
-/* -*- mode: js; js-basic-offset: 4; indent-tabs-mode: nil -*- */
-
-const Clutter = imports.gi.Clutter;
-const Lang = imports.lang;
-const Meta = imports.gi.Meta;
-const Shell = imports.gi.Shell;
-
-const AltTab = imports.ui.altTab;
-const Main = imports.ui.main;
-const WindowManager = imports.ui.windowManager;
-
-let injections = {};
-
-function init(metadata) {
-}
-
-function setKeybinding(name, func) {
-    Main.wm.setCustomKeybindingHandler(name, Shell.ActionMode.NORMAL, func);
-}
-
-function enable() {
-    injections['_keyPressHandler'] = AltTab.WindowSwitcherPopup.prototype._keyPressHandler;
-    AltTab.WindowSwitcherPopup.prototype._keyPressHandler = function(keysym, action) {
-        switch(action) {
-            case Meta.KeyBindingAction.SWITCH_APPLICATIONS:
-              action = Meta.KeyBindingAction.SWITCH_WINDOWS;
-              break;
-            case Meta.KeyBindingAction.SWITCH_APPLICATIONS_BACKWARD:
-              action = Meta.KeyBindingAction.SWITCH_WINDOWS_BACKWARD;
-              break;
-        }
-        return injections['_keyPressHandler'].call(this, keysym, action);
-    };
-
-    Main.wm._forcedWindowSwitcher = function(display, screen, window, binding) {
-        /* prevent a corner case where both popups show up at once */
-        if (this._workspaceSwitcherPopup != null)
-            this._workspaceSwitcherPopup.destroy();
-
-        let tabPopup = new AltTab.WindowSwitcherPopup();
-
-        if (!tabPopup.show(binding.is_reversed(), binding.get_name(), binding.get_mask()))
-            tabPopup.destroy();
-    };
-
-    setKeybinding('switch-applications', Lang.bind(Main.wm, Main.wm._forcedWindowSwitcher));
-    setKeybinding('switch-applications-backward', Lang.bind(Main.wm, Main.wm._forcedWindowSwitcher));
-}
-
-function disable() {
-    var prop;
-
-    setKeybinding('switch-applications', Lang.bind(Main.wm, Main.wm._startSwitcher));
-    setKeybinding('switch-applications-backward', Lang.bind(Main.wm, Main.wm._startSwitcher));
-
-    for (prop in injections)
-        AltTab.WindowSwitcherPopup.prototype[prop] = injections[prop];
-    delete Main.wm._forcedWindowSwitcher;
-}

extensions/alternate-tab/metadata.json.in

@@ -1,11 +0,0 @@
-{
-"extension-id": "@extension_id@",
-"uuid": "@uuid@",
-"settings-schema": "@gschemaname@",
-"gettext-domain": "@gettext_domain@",
-"name": "AlternateTab",
-"description": "Substitute Alt-Tab with a window based switcher that does not group by application.\nThis extension is part of Classic Mode and is officially supported by GNOME. Please do not report bugs using the form below, use GNOME Bugzilla instead.",
-"original-authors": [  "jw@bargsten.org", "thomas.bouffon@gmail.com" ],
-"shell-version": [ "@shell_current@" ],
-"url": "@url@"
-}

extensions/alternate-tab/prefs.js

@@ -1,85 +0,0 @@
-/* -*- mode: js2; js2-basic-offset: 4; indent-tabs-mode: nil -*- */
-
-const Gio = imports.gi.Gio;
-const Gtk = imports.gi.Gtk;
-const GObject = imports.gi.GObject;
-const Lang = imports.lang;
-
-const Gettext = imports.gettext.domain('gnome-shell-extensions');
-const _ = Gettext.gettext;
-const N_ = function(e) { return e };
-
-const ExtensionUtils = imports.misc.extensionUtils;
-const Me = ExtensionUtils.getCurrentExtension();
-const Convenience = Me.imports.convenience;
-
-const SETTINGS_APP_ICON_MODE = 'app-icon-mode';
-const SETTINGS_CURRENT_WORKSPACE_ONLY = 'current-workspace-only';
-
-const MODES = {
-    'thumbnail-only': N_("Thumbnail only"),
-    'app-icon-only': N_("Application icon only"),
-    'both': N_("Thumbnail and application icon"),
-};
-
-const AltTabSettingsWidget = new GObject.Class({
-    Name: 'AlternateTab.Prefs.AltTabSettingsWidget',
-    GTypeName: 'AltTabSettingsWidget',
-    Extends: Gtk.Grid,
-
-    _init : function(params) {
-        this.parent(params);
-        this.margin = 24;
-        this.row_spacing = 6;
-	this.orientation = Gtk.Orientation.VERTICAL;
-
-        this._settings = new Gio.Settings({ schema_id: 'org.gnome.shell.window-switcher' });
-
-        let presentLabel = '<b>' + _("Present windows as") + '</b>';
-        this.add(new Gtk.Label({ label: presentLabel, use_markup: true,
-                                 halign: Gtk.Align.START }));
-
-        let align = new Gtk.Alignment({ left_padding: 12 });
-        this.add(align);
-
-        let grid = new Gtk.Grid({ orientation: Gtk.Orientation.VERTICAL,
-                                  row_spacing: 6,
-                                  column_spacing: 6 });
-        align.add(grid);
-
-        let radio = null;
-        let currentMode = this._settings.get_string(SETTINGS_APP_ICON_MODE);
-        for (let mode in MODES) {
-            // copy the mode variable because it has function scope, not block scope
-            // so cannot be used in a closure
-            let modeCapture = mode;
-            let name = Gettext.gettext(MODES[mode]);
-
-            radio = new Gtk.RadioButton({ group: radio, label: name, valign: Gtk.Align.START });
-            radio.connect('toggled', Lang.bind(this, function(widget) {
-                if (widget.active)
-                    this._settings.set_string(SETTINGS_APP_ICON_MODE, modeCapture);
-            }));
-            grid.add(radio);
-
-            if (mode == currentMode)
-                radio.active = true;
-        }
-
-	let check = new Gtk.CheckButton({ label: _("Show only windows in the current workspace"),
-	                                  margin_top: 6 });
-	this._settings.bind(SETTINGS_CURRENT_WORKSPACE_ONLY, check, 'active', Gio.SettingsBindFlags.DEFAULT);
-	this.add(check);
-    },
-});
-
-function init() {
-    Convenience.initTranslations();
-}
-
-function buildPrefsWidget() {
-    let widget = new AltTabSettingsWidget();
-    widget.show_all();
-
-    return widget;
-}

extensions/alternate-tab/stylesheet.css

@@ -1 +0,0 @@
-/* This extensions requires no special styling */

extensions/apps-menu/Makefile.am

@@ -1,3 +0,0 @@
-EXTENSION_ID = apps-menu
-
-include ../../extension.mk

extensions/apps-menu/Makefile.in

@@ -1,546 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = extensions/apps-menu
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(dist_extension_DATA) \
-	$(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(extensiondir)" \
-	"$(DESTDIR)$(extensiondir)"
-DATA = $(dist_extension_DATA) $(nodist_extension_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/../../extension.mk $(srcdir)/Makefile.in \
-	$(top_srcdir)/include.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTENSION_ID = apps-menu
-extensionurl = http://git.gnome.org/gnome-shell-extensions
-
-# Change these to modify how installation is performed
-topextensiondir = $(datadir)/gnome-shell/extensions
-extensionbase = @gnome-shell-extensions.gcampax.github.com
-gschemabase = org.gnome.shell.extensions
-uuid = $(EXTENSION_ID)$(extensionbase)
-gschemaname = $(gschemabase).$(EXTENSION_ID)
-extensiondir = $(topextensiondir)/$(uuid)
-dist_extension_DATA = extension.js stylesheet.css $(EXTRA_MODULES)
-nodist_extension_DATA = metadata.json $(top_srcdir)/lib/convenience.js $(EXTRA_EXTENSION)
-EXTRA_DIST = metadata.json.in
-CLEANFILES = metadata.json
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign extensions/apps-menu/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign extensions/apps-menu/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_extensionDATA: $(dist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-dist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-install-nodist_extensionDATA: $(nodist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-nodist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(extensiondir)" "$(DESTDIR)$(extensiondir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_extensionDATA \
-	install-nodist_extensionDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_extensionDATA \
-	uninstall-nodist_extensionDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_extensionDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-nodist_extensionDATA install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dist_extensionDATA uninstall-nodist_extensionDATA
-
-.PRECIOUS: Makefile
-
-
-metadata.json: metadata.json.in $(top_builddir)/config.status
-	$(AM_V_GEN) sed \
-            -e "s|[@]extension_id@|$(EXTENSION_ID)|" \
-	    -e "s|[@]uuid@|$(uuid)|" \
-	    -e "s|[@]gschemaname@|$(gschemaname)|" \
-	    -e "s|[@]gettext_domain@|$(GETTEXT_PACKAGE)|" \
-	    -e "s|[@]shell_current@|$(SHELL_VERSION)|" \
-	    -e "s|[@]url@|$(extensionurl)|" \
-	    $< > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

extensions/apps-menu/meson.build

@@ -0,0 +1,7 @@
+extension_data += configure_file(
+  input: metadata_name + '.in',
+  output: metadata_name,
+  configuration: metadata_conf
+)
+extension_data += files('stylesheet.css')
+extension_schemas += files(metadata_conf.get('gschemaname') + '.gschema.xml')

extensions/apps-menu/metadata.json.in

@@ -1,9 +1,10 @@
 {
 "extension-id": "@extension_id@",
 "uuid": "@uuid@",
+"settings-schema": "@gschemaname@",
 "gettext-domain": "@gettext_domain@",
 "name": "Applications Menu",
-"description": "Add a category-based menu for applications.\nThis extension is part of Classic Mode and is officially supported by GNOME. Please do not report bugs using the form below, use GNOME Bugzilla instead.",
+"description": "Add a category-based menu for applications.\nThis extension is part of Classic Mode and is officially supported by GNOME. Please do not report bugs using the form below, use GNOME's GitLab instance instead.",
 "original-authors": [ "e2002@bk.ru", "debarshir@gnome.org" ],
 "shell-version": [ "@shell_current@" ],
 "url": "@url@"

extensions/apps-menu/org.gnome.shell.extensions.apps-menu.gschema.xml

@@ -0,0 +1,12 @@
+<schemalist gettext-domain="gnome-shell-extensions">
+  <schema id="org.gnome.shell.extensions.apps-menu"
+          path="/org/gnome/shell/extensions/apps-menu/">
+    <key name="apps-menu-toggle-menu" type="as">
+      <default>["&lt;Alt&gt;F1"]</default>
+      <summary>Keybinding to open the applications menu</summary>
+      <description>
+        Keybinding to open the applications menu.
+      </description>
+    </key>
+  </schema>
+</schemalist>

extensions/auto-move-windows/Makefile.am

@@ -1,7 +0,0 @@
-EXTENSION_ID = auto-move-windows
-
-EXTRA_MODULES = prefs.js
-
-include ../../extension.mk
-include ../../settings.mk
-

extensions/auto-move-windows/Makefile.in

@@ -1,554 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = extensions/auto-move-windows
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
-	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(dist_extension_DATA) \
-	$(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(extensiondir)" \
-	"$(DESTDIR)$(extensiondir)"
-DATA = $(dist_extension_DATA) $(nodist_extension_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/../../extension.mk \
-	$(srcdir)/../../settings.mk $(srcdir)/Makefile.in \
-	$(top_srcdir)/include.mk
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_EXTENSIONS = @ALL_EXTENSIONS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CLASSIC_EXTENSIONS = @CLASSIC_EXTENSIONS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLED_EXTENSIONS = @ENABLED_EXTENSIONS@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SASSC = @SASSC@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHELL_VERSION = @SHELL_VERSION@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gsettingsschemadir = @gsettingsschemadir@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTENSION_ID = auto-move-windows
-EXTRA_MODULES = prefs.js
-extensionurl = http://git.gnome.org/gnome-shell-extensions
-
-# Change these to modify how installation is performed
-topextensiondir = $(datadir)/gnome-shell/extensions
-extensionbase = @gnome-shell-extensions.gcampax.github.com
-gschemabase = org.gnome.shell.extensions
-uuid = $(EXTENSION_ID)$(extensionbase)
-gschemaname = $(gschemabase).$(EXTENSION_ID)
-extensiondir = $(topextensiondir)/$(uuid)
-dist_extension_DATA = extension.js stylesheet.css $(EXTRA_MODULES)
-nodist_extension_DATA = metadata.json $(top_srcdir)/lib/convenience.js $(EXTRA_EXTENSION)
-EXTRA_DIST = metadata.json.in $(gsettings_SCHEMAS)
-CLEANFILES = metadata.json $(gsettings_SCHEMAS:.xml=.valid)
-gsettings_SCHEMAS = $(gschemaname).gschema.xml
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(srcdir)/../../settings.mk $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign extensions/auto-move-windows/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign extensions/auto-move-windows/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(srcdir)/../../extension.mk $(top_srcdir)/include.mk $(srcdir)/../../settings.mk $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_extensionDATA: $(dist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-dist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-install-nodist_extensionDATA: $(nodist_extension_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(extensiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(extensiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(extensiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(extensiondir)" || exit $$?; \
-	done
-
-uninstall-nodist_extensionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_extension_DATA)'; test -n "$(extensiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(extensiondir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(extensiondir)" "$(DESTDIR)$(extensiondir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_extensionDATA \
-	install-nodist_extensionDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_extensionDATA \
-	uninstall-nodist_extensionDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_extensionDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-nodist_extensionDATA install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dist_extensionDATA uninstall-nodist_extensionDATA
-
-.PRECIOUS: Makefile
-
-
-metadata.json: metadata.json.in $(top_builddir)/config.status
-	$(AM_V_GEN) sed \
-            -e "s|[@]extension_id@|$(EXTENSION_ID)|" \
-	    -e "s|[@]uuid@|$(uuid)|" \
-	    -e "s|[@]gschemaname@|$(gschemaname)|" \
-	    -e "s|[@]gettext_domain@|$(GETTEXT_PACKAGE)|" \
-	    -e "s|[@]shell_current@|$(SHELL_VERSION)|" \
-	    -e "s|[@]url@|$(extensionurl)|" \
-	    $< > $@
-
-%.desktop:%.desktop.in
-	$(AM_V_GEN) $(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
-
-@GSETTINGS_RULES@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: