Groupmod -U may cause crashes because of double free. If without -a, the first free of (*ogrp).gr_mem is in gr_free_members(&grp), and then in gr_update without -n or gr_remove with -n.
Considering the minimal impact of modifications on existing code, delete gr_free_members(&grp) to avoid double free.Although this may seem reckless, the second free in two different positions will definitely be triggered, and the following two test cases can be used to illustrate the situation :
[root@localhost src]# ./useradd u1
[root@localhost src]# ./useradd u2
[root@localhost src]# ./useradd u3
[root@localhost src]# ./groupadd -U u1,u2,u3 g1
[root@localhost src]# ./groupmod -n g2 -U u1,u2 g1
Segmentation fault
This case would free (*ogrp).gr_mem in gr_free_members(&grp) due to assignment statements grp = *ogrp, then in if (nflg && (gr_remove (group_name) == 0)), which finally calls gr_free_members(grent) to free (*ogrp).gr_mem again.
[root@localhost src]# ./useradd u1
[root@localhost src]# ./useradd u2
[root@localhost src]# ./useradd u3
[root@localhost src]# ./groupadd -U u1,u2,u3 g1
[root@localhost src]# ./groupmod -U u1,u2 g1
Segmentation fault
The other case would free (*ogrp).gr_mem in gr_free_members(&grp) too, then in if (gr_update (&grp) == 0), which finally calls gr_free_members(grent) too to free (*ogrp).gr_mem again.
So the first free is unnecessary, maybe we can drop it.
Fixes: 342c934a35 ("add -U option to groupadd and groupmod")
Closes: <https://github.com/shadow-maint/shadow/issues/1013>
Link: <https://github.com/shadow-maint/shadow/pull/1007>
Link: <https://github.com/shadow-maint/shadow/pull/271>
Link: <https://github.com/shadow-maint/shadow/issues/265>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: lixinyun <li.xinyun@h3c.com>
Per https://tdg.docbook.org/tdg/4.5/term, term is a word being
defined in a varlistentry. The 'high uid' description is not a
varlistentry, so <term> and </term> show up in the processed
manpage. See debian Bug#1072297.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
`PKG_CONFIG` variable needs to be set for `PKG_CHECK_MODULES` to
succeed, but this wasn't happening in Fedora because the first
appearance of `PKG_CHECK_MODULES` was conditionally skipped because this
distribution is compiled without `libbsd` support. Thus, moving the
cmocka library detection before libbsd fixes the problem.
Suggested-by: Lukas Slebodnik <lslebodn@fedoraproject.org>
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
All call sites have been replaced by functions from "atoi/a2i.h" and
"atoi/str2i.h" recently.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It is a simpler call, with more type safety.
A consequence of this change is that the program now accepts numbers in
bases 8 and 16. That's not a problem here, I think.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
time_t isn't necessarily unsigned (in fact, it's likely to be signed.
Therefore, parse the number as the right type, via a2i(time_t, ...).
Still, reject negative numbers, just to be cautious. It was done
before (strtoull_noneg()), so it shouldn't be a problem. (However,
strtoull_noneg() was only introduced recently, and before that we called
strtoull(3), which silently accepted negative values.)
Remove the limitation of ULONG_MAX, which seems arbitrary. It probably
was written in times where 'time_t' had the same length of 'long', and
this was thus a test that the value didn't overflow 'time_t'. Such a
test is implicit in the a2i() call, so forget about it.
Unify the error messages into a single one that provides all the info
(except the value of 'fallback').
Link: <cb610d54b4 (r136407772)>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Chris Lamb <lamby@debian.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Instead of raw sysconf(_SC_LOGIN_NAME_MAX) calls, which was being used
without error handling.
Fixes: 3b7cc05387 ("lib: replace `USER_NAME_MAX_LENGTH` macro")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Keep the while loop in the outer function, and move the iteration code
to this new helper. This makes it a bit more readable.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Keep the while loop in the outer function, and move the iteration code
to this new helper. This makes it a bit more readable.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
After _every_ iteration, 'changed' is always 'false'. We don't need to
have it outside of the loop.
See:
$ grepc update_gshadow_file . \
| grep -e changed -e goto -e continue -e break -e free_ngrp -e '{' -e '}' \
| pcre2grep -v -M '{\n\t*}';
{
bool changed;
changed = false;
while ((sgrp = sgr_next ()) != NULL) {
if (!was_member && !was_admin && !is_member) {
continue;
}
if (was_admin && lflg) {
changed = true;
}
if (was_member) {
if ((!Gflg) || is_member) {
if (lflg) {
changed = true;
}
} else {
changed = true;
}
} else if (is_member) {
changed = true;
}
if (!changed)
goto free_nsgrp;
changed = false;
}
}
This was already true in the commit that introduced the code:
$ git show 45c6603cc:src/usermod.c \
| grepc update_gshadow \
| grep -e changed -e goto -e break -e continue -e '\<if\>' -e '{' -e '}' \
| pcre2grep -v -M '{\n\t*}';
{
int changed;
changed = 0;
while ((sgrp = sgr_next())) {
* See if the user was a member of this group
* See if the user was an administrator of this group
* See if the user specified this group as one of their
if (!was_member && !was_admin && !is_member)
continue;
if (was_admin && lflg) {
changed = 1;
}
if (was_member && (!Gflg || is_member)) {
if (lflg) {
changed = 1;
}
} else if (was_member && Gflg && !is_member) {
changed = 1;
} else if (!was_member && Gflg && is_member) {
changed = 1;
}
if (!changed)
continue;
changed = 0;
}
}
Fixes: 45c6603cc8 ("[svn-upgrade] Integrating new upstream version, shadow (19990709)")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This function creates a temporary file, and returns a FILE pointer to
it. This avoids dealing with both a file descriptor and a FILE pointer,
and correctly deallocating the resources on error.
The code before this patch was leaking the file descriptor if fdopen(3)
failed.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
See asprintf(3):
RETURN VALUE
When successful, these functions return the number of bytes
printed, just like sprintf(3). If memory allocation wasn’t possi‐
ble, or some other error occurs, these functions will return -1,
and the contents of strp are undefined.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This will help add other labels in the following commits.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Resources should be freed in the inverse order of the allocation.
This refactor prepares for the following commits, which fix some leaks.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Instead of GNU builtins and extensions, these macros can be implemented
with C11's _Generic(3), and the result is much simpler (and safer, since
it's now an error, not just a warning).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
'endptr' is appropriate internally in strtol(3) because it's a pointer
to 'end', and 'end' itself is a pointer to one-after-the-last character
of the numeric string. In other words,
endptr == &end
However, naming the pointer whose address we pass to strtol(3)'s
'endptr' feels wrong, and causes me trouble while parsing the code; I
need to double check the number of dereferences, because something feels
wrong in my head.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It's doesn't make much sense to break from a switch() just to return.
Let's return early, to simplify.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This means we set the pointees on error, which we didn't do before, but
since we return -1 on error and ignore (don't use) the pointees at call
site, that's fine.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
All 3 non-error paths in the second part resulted in *has_min = true.
Set in once before the switch(), to simplify.
This means we set this variable on error, which we didn't do before,
but since we return -1 on error and ignore (don't use) the pointees at
call site, that's fine.
Also, move a couple of *has_max = true statements to before a comment,
in preparation for future commits.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Set *has_{min,max} = false at the begining, so we only need to set them
to true later.
This means we set these variables on error, which we didn't do before,
but since we return -1 on error and ignore (don't use) the pointees at
call site, that's fine.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
libpam is enabled to provide `passwd` binary from this package, as there
are several password quality checks that are enabled through a PAM
module. Same reason to disable account-tools-setuid.
sssd is disabled because `files provider` has been removed in sssd, and
the underlying functionality in shadow isn't needed anymore.
libcrack dependency was disabled some time ago, but the upstream repo
wasn't updated. Doing it now.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
The manpages for newuidmap and newgidmap had a typo "[pid[" instead
of "[pid]". They were also unclear about what the /proc/pid fd should
be. Fix both.
Closes#977
Reported-by: igo95862@yandex.ru
Signed-off-by: Serge Hallyn <serge@hallyn.com>
If not enough memory is available for more environment variables, treat
it exactly like not enough memory for new environment variable content.
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
This silences a CodeQL warning. We don't care about reentrancy, but
after this patch we don't need to break a long line, so that's a win.
Reviewed-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This macro makes sure that the first argument is an array, and
calculates its size.
Reviewed-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Keep pot creation date out of our po files when we compare them.
Otherwise, we always think they need to be updated.
We prepend a line '# To re-generate, ....' to the shadow-man-pages.pot
file. Do that before we compare the new candidate, because right
now our comparison to see if we've made changes always thinks we have.
Put some of the tempfiles in a mktemp -d'd directory, which we remove when
all's done. This keeps the working tree cleaner.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
def_find can return NULL for unset, not just unknown, config options. So
move the decision of whether to log an error message about an unknown config
option back into def_find, which knows the difference. Only putdef_str()
will pass a char* srcfile to def_find, so only calls from putdef_str will
cause the message, which was the original intent of fa68441bc4.
closes#967
fixes: fa68441bc4 ("Improve the login.defs unknown item error message")
Signed-off-by: Serge Hallyn <serge@hallyn.com>
There are no guarantees that fstatat() does not clobber the stat
buffer on errors.
Use a temporary buffer so that the following code sees correct
attributes of the source entry.
Issue #973
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
The combination of bzero and free could be optimized away.
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
This change executes `i++` one more time before breaking, so we need to
update the `i+1` after the loop to just `i`.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
cp can only be an empty string literal in that conditional. Use a
string literal to be more explicit.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Performance tests made in 2007 are obsolete. We should assume libc is
reasonably fast today (otherwise, report a bug to libc).
$ git blame -- lib/sgetgrent.c | grep strchr
45c6603cc (nekral-guest 2007-10-07 11:44:02 +0000 30) * WARNING: I profiled this once with and without strchr() calls
6f88bcf58 (nekral-guest 2008-05-26 08:31:14 +0000 97) cp = strchr (cp, ':');
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It's trivial to do the change, and it removes a CodeQL warning.
We don't need to be reentrant, but it doesn't hurt either.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It was always being called with 'day * DAY', so do that internally and
simplify. This grabs some code from print_day_as_date().
Cc: Tobias Stoeckmann <tobias@stoeckmann.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Amazing that this triggered no warnings at all.
Fixes: 355ad6a9e0 ("Have a single definition of date_to_str()")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Also, it was checking for >=0 for success, but since that code is for
opening a different tty as stdin, that was bogus. But since it's
guaranteed to be either 0 or -1, this commit doesn't add any code to
make sure it's 0 (i.e., we could say !=0 instead of ==-1). That's more
appropriate for a different commit.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Remove /*ARGSUSED*/ comments. Instead, use appropriate declarators for
main(). ISO C allows using int main(void) if the parameters are going
to be unused.
Also, do some cosmetic changes in the uses of argc and argv, to show
where they are used.
And use *argv[], instead of **argv. Array notation is friendlier, IMO.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
OPENLOG() already sets the program name as the prefix.
This resulted in entries like:
$ journalctl 2>/dev/null | grep passwd
Mar 03 01:09:47 debian passwd[140744]: passwd: can't view or modify password information for root
Fixes: 8e167d28af ("[svn-upgrade] Integrating new upstream version, shadow (4.0.8)")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Previously, we were performing the following two checks:
- if (ranges != ((argc + 2) / 3)) {
- if ((ranges * 3) > argc) {
Let's draw a table of the possible input that would pass the first check:
argc: 0 1 2 3 4 5 6 7 8 9
rng: 0 1 1 1 2 2 2 3 3 3
a+2/3*3:0 3 3 3 6 6 6 9 9 9 <-- this is roundup(argc, 3);
a+2/3: 0 1 1 1 2 2 2 3 3 3 <-- this is roundup(argc, 3) / 3;
rng*3: 0 3 3 3 6 6 6 9 9 9
From those, let's extract those that would also pass the second check:
argc: 0 3 6 9
rng: 0 1 2 3
rng*3: 0 3 6 9
We can see that there's a simple check for this input:
+ if (ranges * 3 != argc) {
As a sanity check, let's draw a table of the acceptable input with that
check:
rng: 0 1 2 3
rng*3: 0 3 6 9
argc: 0 3 6 9
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Adding function check_fds to new file fd.c. The function check_fds
should be called in every setuid/setgid program.
Co-developed-by: Alejandro Colomar <alx@kernel.org>
The function should never be used; it's always used via its wrapper
macro. To simplify, and reduce chances of confusion: remove the
function, and implement the macro directly in terms of
stpcpy(mempcpy(strnlen())).
Update the documentation, and improve the example, which was rather
confusing.
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
A difference between 'struct utmp' and 'struct utmpx' is that
the former uses UT_LINESIZE for the size of its array members,
while the latter doesn't have a standard variable to get its
size. Therefore, we need to get the number of elements in
the array with NITEMS().
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This macro is useful to get the size of a member of a structure
without having a variable of that type.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
utmpx is specified by POSIX as an XSI extension. That's more portable
than utmp, which is unavailable for example in musl libc. The manual
page specifies that in Linux (but it probably means in glibc), utmp and
utmpx (and the functions that use them) are identical, so this commit
shouldn't affect glibc systems.
Assume utmpx is always present.
Also, if utmpx is present, POSIX guarantees that some members exist:
- ut_user
- ut_id
- ut_line
- ut_pid
- ut_type
- ut_tv
So, rely on them unconditionally.
Fixes: 170b76cdd1 ("Disable utmpx permanently")
Closes: <https://github.com/shadow-maint/shadow/issues/945>
Reported-by: Firas Khalil Khana <firasuke@gmail.com>
Reported-by: "A. Wilfox" <https://github.com/awilfox>
Tested-by: Firas Khalil Khana <firasuke@gmail.com>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The passwd silently truncated the password length to PASS_MAX.
This patch introduces check that prints an error message
and exits the call.
Signed-off-by: Tomas Halman <tomas@halman.net>
The passwd utility had hardcoded limit for password lenght set
to 200 characters. In the agetpass.c is used PASS_MAX for
this purpose.
This patch moves the PASS_MAX definition to common place
and uses it in both places.
Signed-off-by: Tomas Halman <tomas@halman.net>
If (maxsize == -1), then ((size_t)maxsize == SIZE_MAX). And no size can
ever be >= SIZE_MAX, so it will never return false if sysconf(3) reports
an unlimited user-name size via returning -1. Well, to be pedantic,
that disallows a user-name siz of precisely SIZE_MAX bytes when
sysconf(3) returns -1. However, that's probably a good thing; such a
long user name might trigger Undefined Behavior somewhere else, so be
cautious and disallow it. I hope nobody will be using the entire
address space for a user name.
The commit that introduced that check missed that this code had always
supported unlimited user-name sizes since it was introduced by Iker in
3b7cc05387 ("lib: replace `USER_NAME_MAX_LENGTH` macro"), and
6be85b0baf ("lib/chkname.c: Use tmp variable to avoid a -Wsign-compare
warning") even clarified this in the commit message.
So, while the code in 6a1f45d932 ("lib/chkname.c: Support unlimited
user name lengths") wasn't bad per se, the commit message was incorrect.
What that patch did was adding code for handling EINVAL (or any other
errors that a future kernel might add).
To be more pedantically correct, that commit also allowed (under certain
circumstances, user names of SIZE_MAX bytes, but those were originally
allowed (by accident), and only became disallowed in 403a2e3771
("lib/chkname.c: Take NUL byte into account"). But again, let's
disallow those, just to be cautious.
Link: <https://github.com/shadow-maint/shadow/pull/935>
Link: <https://github.com/shadow-maint/shadow/pull/935#discussion_r1477429492>
See-also: 6be85b0baf ("lib/chkname.c: Use tmp variable to avoid a -Wsign-compare warning")
Fixes: 6a1f45d932 ("lib/chkname.c: Support unlimited user name lengths")
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Tobias Stoeckmann <tobias@stoeckmann.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Before 3b7cc05387 ("lib: replace `USER_NAME_MAX_LENGTH` macro"), this
code did use a length. It used a utmp(5) fixed-width buffer, so the
length matches the buffer size (there was no terminating NUL byte).
However, sysconf(_SC_LOGIN_NAME_MAX) returns a buffer size that accounts
for the terminating null byte; see sysconf(3). Thus, the commit that
introduced the call to sysconf(3), should have taken that detail into
account.
403a2e3771 ("lib/chkname.c: Take NUL byte into account"), by Tobias,
caught that bug in <lib/chkname.c>, but missed that the same commit that
introduced that bug, introduced the same bug in two other places.
This fixes all remaining calls to sysconf(_SC_LOGIN_NAME_MAX).
I still observe some suspicious code after this fix:
if (do_rlogin(hostname, username, max_size - 1, term, sizeof(term)))
...
login_prompt(username, max_size - 1);
We're passing size-1 to functions that want a size. But since the fix
to those will be different, let's do that in the following commits.
Link: <https://github.com/shadow-maint/shadow/pull/935>
Link: <https://github.com/shadow-maint/shadow/issues/920#issuecomment-1926002209>
Link: <https://github.com/shadow-maint/shadow/pull/757>
Link: <https://github.com/shadow-maint/shadow/issues/674>
See-also: 403a2e3771 ("lib/chkname.c: Take NUL byte into account")
Fixes: 3b7cc05387 ("lib: replace `USER_NAME_MAX_LENGTH` macro")
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Tobias Stoeckmann <tobias@stoeckmann.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It is slightly confusing to allow adding these only to later refuse them.
Here is a (lightly tested :) patch to also refuse them when adding.
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Days officially roll over at 00:00 UTC, not at 12:00 UTC. I see no
reason to add that half day.
Also, remove the comment. It's likely to get stale.
So, get_date() gets the number of seconds since the Epoch. I wonder how
that thing works, but I'll assume it's something similar to getdate(3)
+ mktime(3). After that, we need to convert seconds since Epoch to days
since Epoch. That should be a simple division, AFAICS, since Epoch is
"1970‐01‐01 00:00:00 +0000 (UTC)". See mktime(3).
Fixes: 45c6603cc8 ("[svn-upgrade] Integrating new upstream version, shadow (19990709)")
Link: <https://github.com/shadow-maint/shadow/issues/939>
Reported-by: Michael Vetter <jubalh@iodoru.org>
Tested-by: Gus Kenion <https://github.com/kenion>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Very large values in /etc/shadow could lead to overflows. Make sure
that these calculations are saturated at LONG_MAX. Since entries are
based on days and not seconds since epoch, saturating won't hurt anyone.
Co-developed-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Co-developed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The conversion from day to seconds can be done in print_date
(renamed to print_day_as_date for clarification). This has the nice
benefit that DAY multiplication and long to time_t conversion are done
at just one place.
Co-developed-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Co-developed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If the system does not have a user name length limit, support it
accordingly. If the system has no _SC_LOGIN_NAME_MAX, use
LOGIN_NAME_MAX constant instead.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The _SC_LOGIN_NAME_MAX value includes space for the NUL byte. The length
of name must smaller than this value to be valid.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The password returned by agetpass can be used directly without copying
it into a char array first.
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Clarify how this endless while(true) loop can be stopped by using a
boolean variable as condition and turn it into a do-while loop.
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
New option --stdin/-t is available for root user. It is useful
for automation/setup and it makes shadow utils passwd more versatile.
Signed-off-by: Tomas Halman <tomas@halman.net>
There is an inconsistent use of the MAYBE_UNUSED macro. Sometimes the
`int unused(x)` form is used form and others the `unused int x`. We'd
like to use the second form always.
Related-To: https://github.com/shadow-maint/shadow/issues/918
Suggested-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
This fixes build with glibc-2.33 (newer glibc merged libdl and libpthread
into libc):
```
libtool: link: x86_64-pc-linux-gnu-gcc -isystem /usr/include/bsd -DLIBBSD_OVERLAY -O2 -pipe -Wl,-O1 -o login login.o login_nopam.o -Wl,--as-needed ../lib/.libs/libshadow.a -lcrypt -lsystemd -lpam -lpam_misc -lbsd
/usr/lib/gcc/x86_64-pc-linux-gnu/13/../../../../x86_64-pc-linux-gnu/bin/ld: ../lib/.libs/libshadow.a(libshadow_la-nss.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5'
/usr/lib/gcc/x86_64-pc-linux-gnu/13/../../../../x86_64-pc-linux-gnu/bin/ld: /lib64/libdl.so.2: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
```
In Debian, the needed macro from libtool seems to be in libltdl-dev.
Signed-off-by: Sam James <sam@gentoo.org>
argv is passed to execve(3), which for historic reasons is non-const,
but doesn't modify the strings.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Uses of this macro indicate a code smell, but in some cases, libc
functions require breaking const correctness. Use this macro to wrap
casts in such cases, so that we limit the danger of the cast.
It only permits discarding const. Discarding any other qualifiers, or
doing other type changes should result in a compile-time error.
Link: <https://software.codidact.com/posts/286575/287345#answer-287345>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strtou[l]l(3) silently converts negative numbers into positive. This
behavior is wrong: a negative value should be parsed as a negative
value, which would underflow unsigned (long) long, and so would return
the smallest possible value, 0, and set errno to ERANGE to report an
error.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions reject negative numbers, instead of silently converting
them into unsigned, which strtou[l]l(3) do.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The sulogin program calls pw_entry in a loop while incorrect root
passwords are entered.
Free the previously allocated memory to avoid memory exhaustion.
Co-developed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
We don't need 'static', because it's in main(), which is only called
once. However, we will need initialization as if it were 'static', so
use ={} to initialize it. This will allow freeing the pointers before
they have been allocated.
Cc: Samanta Navarro <ferivoz@riseup.net>
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Those variables are only used in main(). Restrict their scope.
Keep them static (.bss), as changing that may be dangerous.
Suggested-by: Samanta Navarro <ferivoz@riseup.net>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Add a variadic macro addsl() that accepts an arbitrary number of
addends, instead of having specific versions like addsl2() or addsl3().
It is internally implemented by the addslN() function, which itself
calls addsl2(). addsl3() is now obsolete and thus removed.
Code should just call addsl().
Link: <https://github.com/shadow-maint/shadow/pull/882#discussion_r1437155212>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This is for consistency with addsl3(), and in preparation for the
following commit, which will unify the interface into a single addsl()
macro.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
ISO C guarantees that #undef is a no-op if there is no such macro.
C11::6.10.3.5p2:
> A preprocessing directive of the form
>
> # undef identifier new-line
>
> causes the specified identifier no longer to be defined as a macro
> name. It is ignored if the specified identifier is not currently
> defined as a macro name.
Link: <http://port70.net/~nsz/c/c11/n1570.html#6.10.3.5p2>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions (e.g., gr_free()), explicitly dereference the pointer
and read the pointee.
The /@out@/ comment, which is (almost) analogous to the
[[gnu::access(write_only, ...)]] attribute, means that the pointee can
be uninitialized, since it won't read it. There's a difference between
/@out@/ and the GCC attribute: the attribute doesn't require that the
call writes to the pointee, while /@out@/ requires that the pointee be
fully initialized after the call, so it _must_ write to it.
A guess of why it was used is that these functions are similar to
free(3), which does not read the memory it frees, and so one would
assume that if it doesn't read, write_only (or equivalents) are good.
That's wrong in several ways:
- free(3) does not read _nor_ write to the memory, so it would
be slightly inappropriate to use write_only with it. It wouldn't be
"wrong", but [[gnu::access(none, ...)]] would be more appropriate.
- Because /@out@/ requires that the call writes to the pointee, it
would be wrong to use it in free(3), which doesn't write to the
pointee.
- Our functions are similar to free(3) conceptually, but they don't
behave like free(3), since they do read the memory (pointee) (and
also write to it), and thus they're actually read_write.
Link: <https://splint.org/manual/manual.html#undefined>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If reallocation fails in function list, then reset the size to 0 again.
Without the reset, the next call assumes that `members` points to
a memory location with reserved space.
Also use size_t instead of int for size to prevent signed integer
overflows. The length of group lines is not limited.
Fixes 45c0003e53 (4.14 release series)
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
The size of time_t varies across systems, but since data type long is
more than enough to calculate with days (precision of shadow file),
use it instead.
Just in case a shadow file contains huge values, check for a possible
signed integer overflow.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Link: <https://github.com/shadow-maint/shadow/pull/876>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Contrary to the comment in ENV_HZ.xml, ENV_HZ is not even used in
sulogin (anymore) if PAM support is enabled.
Skip paragraphs of sulogin if PAM support is enabled, since they would
be empty now.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Special care has to be taken for 32 bit systems with a 64 bit time_t,
since their long data type is still 32 bit.
Since this macro expresses a number of seconds, and seconds are in units
of 'time_t' in C, the appropriate type for the multiplication is
'time_t'.
Reported-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The values are retrieved from login.defs files, which normally do not
contain negative values. In fact, negative value -1 is used in many
code places as "feature disabled", which is normally achieved by
simply commenting out the key from the file.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The variable declarations for the buffers have been aligned in this
commit, so that they appear in the diff, making it easier to review.
Some important but somewhat tangent changes included in this commit:
- lib/nss.c: The size was being defined as 65, but then used as 64.
That was a bug, although not an important one; we were just wasting
one byte. Fix that while we replace snprintf() by SNPRINTF(), which
will get the size from sizeof(), and thus will use the real size.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions are like [v]snprintf(3), but return -1 on truncation,
which makes it easier to test. In fact, the API of swprintf(3), which
was invented later than snprintf(3), and is the wide-character version
of it, is identical to this snprintf_().
snprintf(3) is iseful in two cases:
- We don't care if the output is truncated. snprintf(3) is fine for
those, and the return value can be ignored. But snprintf_() is also
fine for those.
- Truncation is bad. In that case, it's as bad as a hard error (-1)
from snprintf, so merging both problems into the same error code
makes it easier to handle errors. Return the length if no truncation
so that we can use it if necessary.
Not returning the whole length before truncation makes a better API,
which need not read the entire input, so it's less vulnerable to DoS
attacks when a malicious user controls the input.
Use these functions to implement SNPRINTF().
Cc: Samanta Navarro <ferivoz@riseup.net>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It wraps snprintf(3) so that it performs some steps that one might
forget, or might be prone to accidents:
- It calculates the size of the destination buffer, and makes sure it's
an array (otherwise, using sizeof(s) would be very bad).
- It calculates if there's truncation or an error, returning -1 if so.
BTW, this macro doesn't have any issues of double evaluation, because
sizeof() doesn't evaluate its argument (unless it's a VLA, but then the
static_assert(3) within NITEMS() makes sure VLAs are not allowed).
This macro is very similar to STRTCPY(), defined in
<lib/string/strtcpy.h>.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
commonio.c: In function 'commonio_unlock':
commonio.c:487:49: warning: '.lock' directive output may be truncated writing 5 bytes into a region of size between 1 and 1024 [-Wformat-truncation=]
487 | snprintf (lock, sizeof lock, "%s.lock", db->filename);
| ^~~~~
commonio.c:487:17: note: 'snprintf' output between 6 and 1029 bytes into a destination of size 1024
487 | snprintf (lock, sizeof lock, "%s.lock", db->filename);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Check for close(2) failure at more places closing a file descriptor
written to.
Also ignore failures with errno set to EINTR (see man:close(2) for
details).
sprintf(3) does not take the destination buffer into account. Although
the destination in these case is large enough, sprintf(3) indicates a
code smell.
Use the xasprintf() wrapper.
Group them at the end of the list of variable definitions, and use
'#if defined()' instead of '#if[n]def'. Also indent nested ones.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
ITI_AGING is not set through any build environment. If it would be set,
then timings in /etc/shadow would not fit anymore.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
su.c:678:26: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘const void *’ [-Wformat=]
su.c:681:44: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘const void *’ [-Wformat=]
su.c:683:46: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘const void *’ [-Wformat=]
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We don't need to terminate them manually after the call. Remove all
that paranoid code, which in some cases was even wrong. While at it,
let's do a few more things:
- Use sizeof(buf) for the size of the buffer. I found that a few cases
were passing one less byte (probably because the last one was
manually zeroed later). This caused a double NUL. snprintf(3) wants
the size of the entire buffer to properly terminate it. Passing the
exact value hardcoded is brittle, so use sizeof().
- Align and improve style of variable declarations. This makes them
appear in this diff, which will help review the patch.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions consume a source string. Document that. There's no way
to mark that they also produce a string in dst, though. That will be up
to the static analyzer to guess.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It signals that a function parameter is a string _before_ the call.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Set errno = 0 before the call. Otherwise, it may contain anything.
- ERANGE is not the only possible errno value of these functions. They
can also set it to EINVAL.
- Any errno value after these calls is bad; just compare against 0.
- Don't check for the return value; just errno. This function is
guaranteed to not modify errno on success (POSIX).
- Check endptr == str, which may or may not set EINVAL.
Suggested-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Since failure() is [[noreturn]], we can invert the conditional so that
we don't need an else. This silences a -Wunused-parameter warning.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This simplifies the code a little bit, and prepares for the next
commits, which will clean up further.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The multiplication was already invoking UB. The test was flawed.
Use __builtin_mul_overflow() instead.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strtol(3) doesn't specify a return value if (value == endptr).
It is always an error, if (value==endptr).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
I used size_t because:
sysconf(3) can return -1 if the value is not supported, but then it can
only mean that there's no limit. Having no limit is the same as having
a limit of SIZE_MAX (to which -1 is converted).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
By writing the terminating null byte via stpcpy(3), we take advantage of
_FORTIFY_SOURCE for the last byte, which was unprotected before this
commit.
Reported-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We were using strncpy(3), which is designed to copy from a string into a
(null-padded) fixed-size character array. However, we were doing the
opposite: copying from a known-size array (which was a prefix of a
string), into a string. That's why we had to manually zero the buffer
afterwards.
Use instead mempcpy(3) to copy the non-null bytes, and then terminate
with a null byte with stpcpy(..., "").
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Upcoming `gcc-14` enabled a few warnings into errors, like
`-Wimplicit-function-declaration`. This caused `shadow` build to fail
as:
pwunconv.c: In function 'main':
pwunconv.c:132:13: error: implicit declaration of function 'getdef_bool' [-Wimplicit-function-declaration]
132 | if (getdef_bool("USE_TCB")) {
| ^~~~~~~~~~~
The change adds missing include headers.
If an entry in /etc/shells is not an absolute path (comments or
partial reads due to fgets), the line should not be considered as
a valid login shell.
In general all systems should have getusershells, but let's better
be safe than sorry.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
For arrays of char, both NITEMS() and SIZEOF_ARRAY() return the same
value. However, NITEMS() is more appropriate. Think of wide-character
equivalents of the same code; with NITEMS(), they would continue to be
valid, while with SIZEOF_ARRAY(), they would be wrong.
In the implementation of ZUSTR2STP(), we want SIZEOF_ARRAY() within the
static assert, because we're just comparing the sizes of the source and
destination buffers, and we don't care if we compare sizes or numbers of
elements, and using sizes is just simpler. But we want NITEMS() in the
zustr2stp() call, where we want to copy a specific number of characters.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We've recently fixed several bugs in the calculation of the size in this
function call. Use this wrapper to prevent similar mistakes in the
future.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This wrapper calculates the destination buffer's size, to avoid errors
in the size calculation.
A curious fact: this macro did exist in Version 7 Unix (with a slightly
different name). I found it by chance, investigating the origins of
strncpy(3) and strncat(3) in V7, after Branden suggested me to do so,
related to recent discussions about string_copying(7).
alx@debian:~/src/unix/unix/Research-V7$ grepc SCPYN .
./usr/src/cmd/login.c:#define SCPYN(a, b) strncpy(a, b, sizeof(a))
Our implementation is slightly better, because using nitems() we're
protected against passing a pointer instead of an array, and it's also
conceptually more appropriate: for wide characters, it would be
#define WCSNCPY(dst, src) wcsncpy(dst, src, NITEMS(dst))
Cc: "G. Branden Robinson" <branden@debian.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We're not even zeroing the last byte after this call. This was a
completely gratuitous truncation of one byte, and the resulting
character array still wasn't guaranteed to be null terminated, because
strncpy(3) can't do that.
Just to clarify, none of these structures needed zeroing, as they are
treated as null-padded fixed-size character arrays. Calling strncpy(3)
was actually the correct call, and the only problem was unnecessarily
truncating strings by one byte more than necessary.
Cc: Matthew House <mattlloydhouse@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This call was too clever. It relied on the last byte of ll_line
being 0 due to a previous memzero() and not writing to it later.
Write an explicit terminating null byte, by using STRTCPY().
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This call was way too clever. It relied on the last byte of fail_line
being 0 due to it being in a static structure and never writing to it.
Write an explicit terminating null byte, by using STRTCPY().
Cc: Matthew House <mattlloydhouse@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We were copying from a (zero-padded) fixed-width character array to a
string, but strncpy(3) is meant to do the opposite thing. ZUSTR2STP()
is designed to be used in this case (like strncat(3)).
Fixes: f40bdfa66a ("libmisc: implement `get_session_host()`")
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions don't seem to exist anymore. I can't find them in
Debian, nor in a web search. They probably were functions from an
ancient implementation of cracklib that doesn't exist anymore.
$ git remote -v
origin git@github.com:cracklib/cracklib.git (fetch)
origin git@github.com:cracklib/cracklib.git (push)
$ grep -rni fascisthistory
$ git log --grep FascistHistory
$ git log -S FascistHistory
Closes: <https://codesearch.debian.net/search?q=FascistHistory&literal=1>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michael Vetter <jubalh@iodoru.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strftime(3) makes no guarantees about the contents of the buffer if the
formatted string wouldn't fit in the buffer. It simply returns 0, and
it's the programmer's responsibility to do the right thing after that.
Let's write the string "future" if there's an error, similar to what we
do with gmtime(3)'s errors.
Also, `buf[size - 1] = '\0';` didn't make sense. If the copy fits,
strftime(3) guarantees to terminate with NUL. If it doesn't, the entire
contents of buf are undefined, so adding a NUL at the end of the buffer
would be dangerous: the string could contain anything, such as
"gimme root access now". Remove that, now that we set the string to
"future", as with gmtime(3) errors. This setting to '\0' comes from the
times when we used strncpy(3) in the implementation, and should have
been removed when I changed it to use strlcpy(3); however, I didn't
check we didn't need it anymore.
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
ut_line doesn't hold a string. It is a null-padded fixed-width array.
Luckily, I don't think there has ever existed a ut_line ("/dev/tty*")
that was 32 bytes long. That would have resulted in a buffer overrun.
Anyway, do the right thing, which is copying into a temporary string.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There's been a very long and interesting discussion in linux-man@ and
libc-alpha@, where we've discussed all the string-copying functions,
their pros and cons, when should each be used and avoided, etc.
Paul Eggert pointed out an important problem of strlcpy(3): it is
vulnerable to DoS attacks if an attacker controls the length of the
source string. And even if it doesn't control it, the function is dead
slow (because its API forces it to calculate strlen(src)).
We've agreed that the general solution for a truncating string-copying
function is to write a wrapper over strnlen(3)+memcpy(3), which is
limited to strnlen(src, sizeof(dst)). This is not vulnerable to DoS,
and is very fast for all buffer sizes. string_copying(7) has been
updated to reflect this, and provides a reference implementation for
this wrapper function.
This strtcpy(3) (t for truncation) wrapper happens to have the same API
that our strlcpy_() function had, so replace it with the better
implementation. We don't need to update callers nor tests, since the
API is the same.
A future commit will rename STRLCPY() to STRTCPY(), and replace
remaining calls to strlcpy(3) by calls to this strtcpy(3).
Link: <https://lore.kernel.org/linux-man/ZU4SDh-Se5gjPny5@debian/T/#mfb5a3fdeb35487dec6f8d9e3d8548bd0d92c4975/>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This test fails now, due to a bug: the return type of strlcpy_() is
size_t, but it should be ssize_t. The next commit will pass the test,
by fixing the bug.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
libbsd is unwanted in Fedora and RHEL, and the recently released Fedora
39 doesn't contain this dependency in the base image.
shadow removed libbsd from its dependencies for Fedora 39, so let's
build without it to avoid compilation errors.
Resolves: https://github.com/shadow-maint/shadow/issues/839
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
free(NULL) is valid; there's no need to check for NULL. Simplify.
Fixes: 5178f8c5af ("utmp: call prepare_utmp() even if utent is NULL")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
copydir.c:429:4: warning: Value stored to 'err' is never read [deadcode.DeadStores]
Also reduce indentation by bailing out early.
(cherry picked from commit d89f2fb06d1b81b56299f9d0bfe7a927a2282f19)
Closes#746
Only print the 'unknown item' message to syslog if we are
actually parsing a login.defs. Prefix it with "shadow:" to make
it clear in syslog where it came from.
Also add the source filename to the console message. I'm not
quite clear on the econf API, so not sure whether in that path we
will end up actually having the path, or printing ''.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
This is not just a style issue. This should be a hard error, and never
compile. ISO C89 already had this feature as deprecated. ISO C99
removed this deprecated feature, for good reasons. If we compile
ignoring this warning, shadow is not going to behave well.
Cc: Sam James <sam@gentoo.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
asprintf(3) is non-standard, but is provided by GNU, the BSDs, and musl.
That makes it portable enough for us to use.
This function is much simpler than the burdensome code for allocating
the right size. Being simpler, it's thus safer.
I took the opportunity to fix the style to my preferred one in the
definitions of variables used in these calls, and also in the calls to
free(3) with these pointers. That isn't gratuituous, but has a reason:
it makes those appear in the diff for this patch, which helps review it.
Oh, well, I had an excuse :)
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
As other x...() wrappers around functions that allocate, these wrappers
are like [v]asprintf(3), but exit on failure.
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Badnames still accepted, note that previously usage already stated
singular form, whilst manpage and real one was plural only.
Fixes: 45d6746219 ("src: correct "badname" option")
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
The file isn't up to date with the latest development, the last change
was made 15 years ago, so I'm removing it.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Another file that I remove with sadness. We were unable to complete the
first item but we are working hard on it.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
I remove this file with sadness, as it contains data from old times.
Unfortunately, this data is no longer relevant. The source code
management tool will keep it in memory.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
I guess we are keeping this for historical purposes more than anything
else. If so, anybody can check the git history to recover the
specification.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Having source code in a compressed file doesn't seem like a good idea. I
checked several distributions and they don't distribute this binary, so
let's remove it.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
The patch is never applied upstream. If I were to take a gamble, I would
even say that it throws an error when trying to patch.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Not sure what this file is exactly, but there's already a groupmems.c
that should generate the binary responsible for managing the members of
a user's primary group.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
AFAIK, it isn't included in any distribution and it isn't used
internally in the project, so let's remove it.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
And do not set 'clear' to point to the empty string. After this commit,
'clear' only stores the result of getpass(3). This will be useful to
change the code to use agetpass().
$ grep '\<clear\>' lib/pwauth.c;
char *clear = NULL;
clear = getpass (prompt);
input = (clear == NULL) ? "" : clear;
clear = getpass (prompt);
input = (clear == NULL) ? "" : clear;
if (NULL != clear) {
strzero (clear);
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There are no users of 'clear_pass' and 'wipe_clear_pass'.
$ grep -rn '\<clear_pass\>'
lib/pwauth.c:35:/*@null@*/char *clear_pass = NULL;
lib/pwauth.c:199: * not wipe it (the caller should wipe clear_pass when it is
lib/pwauth.c:203: clear_pass = clear;
$ grep -rn wipe_clear_pass
lib/pwauth.c:34:bool wipe_clear_pass = true;
lib/pwauth.c:198: * if the external variable wipe_clear_pass is zero, we will
lib/pwauth.c:204: if (wipe_clear_pass && (NULL != clear) && ('\0' != *clear)) {
ChangeLog:3813: * lib/pwauth.c: Use a boolean for wipe_clear_pass and use_skey.
Remove them.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If the destination buffer is an array, we can check our assumptions.
This adds a readable way to explain that dsize must be strictly > ssize.
The reason is that the destination string is the source + '\0'.
If the destination is not an array, it's up to _FORTIFY_SOURCE or
-fanalyzer to catch newly introduced errors. There's nothing we can do;
at least not portably.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This function is like strlcpy(3), but returns -1 on truncation, which
makes it much easier to test. strlcpy(3) is useful in two cases:
- We don't care if the output is truncated. strlcpy(3) is fine for
those, and the return value can be ignored.
- Truncation is bad. In that case, we just want to signal truncation,
and the length of the original string is quite useless. Return the
length iff no truncation so that we can use it if necessary.
This simplifies the definition of the STRLCPY() macro.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It was blessed by POSIX.1-2001, and GCC says that it won't go away,
possibly ever.
memset(3) is dangerous, as the 2nd and 3rd arguments can be accidentally
swapped --who remembers what's the order of the 2nd and 3rd parameters
to memset(3) without checking the manual page or some code that uses
it?--. Some recent compilers may be able to catch that via some
warnings, but those are not infalible. And even if compiler warnings
could always catch that, the time lost in fixing or checking the docs is
lost for no clear gain. Having a sane API that is unambiguous is the
Right Thing (tm); and that API is bzero(3).
If someone doesn't believe memset(3) is error-prone, please read the
book "Unix Network Programming", Volume 1, 3rd Edition by Stevens, et
al., Section 1.2. See a stackoverflow reference in the link below[1].
bzero(3) had a bad fame in the bad old days, because some ancient
systems (I'm talking of many decades ago) shipped a broken version of
bzero(3). We can assume that all systems in which current shadow utils
can be built, have a working version of bzero(3) --if not, please fix
your broken system; don't blame the programmer--.
One reason that some use today to avoid bzero(3) in favor of memset(3)
is that memset(3) is more often used; but that's a circular reasoning.
Even if bzero(3) wasn't supported by the system, it would need to be
invented. It's the right API.
Another reason that some argue is that POSIX.1-2008 removed the
specification of bzero(3). That's not a problem, because GCC will
probably support it forever, and even if it didn't, we can redefine it
like we do with memzero(). bzero(3) is just a one-liner wrapper around
memset(3).
Link: [1] <https://stackoverflow.com/a/17097978>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This makes it harder to make mistakes while editing the code. Since the
sizeof's can be autocalculated, let the machine do that. It also
reduces the cognitive load while reading the code.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It's not being used anymore. We got rid of it in favor of better APIs.
Well, it's still being used in one place: a contrib/ patch, but I
explicitly want to break it, so that someone reviews it. I don't want
to modify it, since it's not being tested, so it would be very risky for
me to touch it. Instead, let it bitrot, and if someone cares, they'll
update it correctly.
BTW, the comment that said /* danger -side effects */ was wrong:
sizeof() doesn't evaluate the argument (unless it's a VLA), so there
wasn't really a double-evaluation issue.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It wraps strlcpy(3bsd) so that it performs some steps that one might
forget, or might be prone to accidents:
- It calculates the size of the destination buffer, and makes sure it's
an array (otherwise, using sizeof(dst) would be very bad).
- It calculates if there's truncation, returning an easy-to-use value.
BTW, this macro doesn't have any issues of double evaluation, because
sizeof() doesn't evaluate its argument (unless it's a VLA, but then
the static_assert(3) within SIZEOF_ARRAY() makes sure VLAs are not
allowed).
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It's a wrapper around zustr2stp() that calls SIZEOF_ARRAY() internally.
The function call is usually --in our code base, always-- called with an
array as the second argument. For such an argument, one should call
SIZEOF_ARRAY(). To avoid mistakes, and simplify usage, let's add this
macro that does it internally.
BTW, this macro doesn't have any issues of double evaluation, because
sizeof() doesn't evaluate its argument (unless it's a VLA, but then
the static_assert(3) within SIZEOF_ARRAY() makes sure VLAs are not
allowed).
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These calls were intending to copy from a NUL-padded (possibly
non-NUL-terminated) character sequences contained in fixed-width arrays,
into a string, where extra padding is superfluous. Use the appropriate
call, which removes the superfluous work. That reduces the chance of
confusing maintainers about the intention of the code.
While at it, use the appropriate third parameter, which is the size of
the source buffer, and not the one of the destination buffer. As a side
effect, this reduces the use of '-1', which itself reduces the chance of
off-by-one bugs.
Also, since using sizeof() on an array is dangerous, use SIZEOF_ARRAY().
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There's no standard function that copies from a null-padded character
sequence into a string.
A few standard functions can be workarounded to do that:
- strncat(3): This function is designed to catenate from a null-padded
character sequence into a string. The catch is that there's no
*cpy() equivalent of it --strncpy(3) is not at all related to
strncat(3); don't be fooled by the confusing name--, so one would
need to zero the first byte before the call to strncat(3). It also
has the inconvenient that it returns a useless value.
- strncpy(3): This function is designed to copy from a string to a
null-padded character sequence; the opposite of what we want to do.
If one passes the size of src instead of the size of dst, and then
manually zeroes the last byte of the dst buffer, something similar
to what we want happens. However, this does more than what we want:
it also padds with NUL the remaining bytes after the terminating NUL.
That extra work can confuse maintainers to believe that it's
necessary. That is exactly what happens in logout.c.
src/logoutd.c-46- /*
src/logoutd.c-47- * ut_user may not have the terminating NUL.
src/logoutd.c-48- */
src/logoutd.c:49: strncpy (user, ut->ut_user, sizeof (ut->ut_user));
src/logoutd.c-50- user[sizeof (ut->ut_user)] = '\0';
In that logout.c case --and in most invocations of strncpy(3), which
is usually a wrong tool-- the extra work is not wanted, so it's
preferrable to use the right tool, a function that does exactly
what's needed and nothing more than that. That tool is zustr2stp().
Read string_copying(7) for a more complete comparison of string copying
functions.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This makes it safe to call sizeof() on an array. Calling sizeof()
directly on an array is dangerous, because if the array changes to be a
pointer, the behavior will unexpectedly change. It's the same problem
as with NITEMS().
Link: <https://stackoverflow.com/a/57537491>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There's no need to have these as macros, so use functions, which are a
lot safer: there's no need to worry about multiple evaluation of args,
and there's also more type safety. Compiler warnings are also simpler,
as they don't dump all the nested macros.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These comments were wrong. Remove them instead of fixing them, since
now that we have this small header file, it's much easier to follow the
preprocessor conditionals.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
sprintf(3) does not take the destination buffer into account. Although
the destination in these case is large enough, sprintf(3) indicates a
code smell.
Use snprintf(3).
commonio.c:522:15: warning: Although the value stored to 'cp' is used in the enclosing expression, the value is never actually read from 'cp' [deadcode.DeadStores]
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Documentation:
- Correct the comment documenting the function:
write_full() doesn't write "up to" count bytes (which is write(2)'s
behavior, and exactly what this function is designed to avoid), but
rather exactly count bytes (on success).
- While fixing the documentation, take the time to add a man-page-like
comment as in other APIs. Especially, since we'll have to document
a few other changes from this patch, such as the modified return
values.
- Partial writes are still possible on error. It's the caller's
responsibility to handle that possibility.
API:
- In write(2), it's useful to know how many bytes were transferred,
since it can have short writes. In this API, since it either writes
it all or fails, that value is useless, and callers only want to know
if it succeeded or not. Thus, just return 0 or -1.
Implementation:
- Use `== -1` instead of `< 0` to check for write(2) syscall errors.
This is wisdom from Michael Kerrisk. This convention is useful
because it more explicitly tells maintainers that the only value
which can lead to that path is -1. Otherwise, a maintainer of the
code might be confused to think that other negative values are
possible. Keep it simple.
- The path under `if (res == 0)` was unreachable, since the loop
condition `while (count > 0)` precludes that possibility. Remove the
dead code.
- Use a temporary variable of type `const char *` to avoid a cast.
- Rename `res`, which just holds the result from write(2), to `w`,
which more clearly shows that it's just a very-short-lived variable
(by it's one-letter name), and also relates itself more to write(2).
I find it more readable.
- Move the definition of `w` to the top of the function. Now that the
function is significantly shorter, the lifetime of the variable is
clearer, and I find it more readable this way.
Use:
- Also use `== -1` to check errors.
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If shadow is built without libbsd support, then readpassphrase() needs
to be provided from the project.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
With the recent changes both login and su compilation fail because there
are some missing dependencies from SELINUX library. Thus, add LIBSELINUX
to su and login for those cases where the library is used.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Remove `utmp` structure as an argument and include its logic inside the
function. This will help remove any reference to utmp from login.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
The functionality from this function is related to utmp. Restrict access
to `setutmp()` to the same file.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
In some embedded systems, users only use the ps
provided by the busybox. But the ps provided by
the busybox does not support the -eo option by
default. As a result, an error is reported when
the userdel is used. So add a judgment on ps.
If there is no ps -eo, traverse the process directly.
The error information is as follows:
# userdel xsl
ps: invalid option -- 'e'
Signed-off-by: xiongshenglan <xiongshenglan@huawei.com>
Print a warning even for the root user if the provided shell isn't
listed in /etc/shells, but continue to execute the action.
In case of non root user exit.
See https://github.com/shadow-maint/shadow/issues/535
Add a comment at the top of that file explaining how to
regenerate it.
We should add a README, but I don't have time to draft one
right now.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Since newgrp is setuid-root, any write() system calls it does in order
to print error messages will be done as the root user.
Unprivileged users can get newgrp to print essentially arbitrary strings
to any open file in this way by passing those strings as argv[0] when
calling execve(). For example:
$ setpid() { (exec -a $1$'\n:' newgrp '' 2>/proc/sys/kernel/ns_last_pid & wait) >/dev/null; }
$ setpid 31000
$ readlink /proc/self
31001
This is not a vulnerability in newgrp; it is a bug in the Linux kernel.
However, this type of bug is not new [1] and it makes sense to try to
mitigate these types of bugs in userspace where possible.
[1]: https://lwn.net/Articles/476947/
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
b1282224 (Add maximum padding to fit IPv6-Addresses, 2020-05-24) pads
the From field header using `maxIPv6Addrlen - 3`. This leaves the
Latest field header misaligned. Subtract 4 (the length of "From").
Fixes build error:
newusers.c: In function 'update_passwd':
newusers.c:433:21: error: 'sflg' undeclared (first use in this function); did you mean 'rflg'?
introduced by
5cd04d03f9
which forgot to define sflg for these configure options:
--without-sha-crypt --without-bcrypt --with-yescrypt
Using the --sha-rounds option without first giving a crypt method via the --crypt-method option results in comparisons with a NULL pointer and thus make chgpasswd segfault:
$ chgpasswd -s 1
zsh: segmentation fault chgpasswd -s 1
Current patch add a sanity check before these comparisons to ensure there is a defined encryption method.
How to trigger this password leak?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When gpasswd(1) asks for the new password, it asks twice (as is usual
for confirming the new password). Each of those 2 password prompts
uses agetpass() to get the password. If the second agetpass() fails,
the first password, which has been copied into the 'static' buffer
'pass' via STRFCPY(), wasn't being zeroed.
agetpass() is defined in <./libmisc/agetpass.c> (around line 91), and
can fail for any of the following reasons:
- malloc(3) or readpassphrase(3) failure.
These are going to be difficult to trigger. Maybe getting the system
to the limits of memory utilization at that exact point, so that the
next malloc(3) gets ENOMEM, and possibly even the OOM is triggered.
About readpassphrase(3), ENFILE and EINTR seem the only plausible
ones, and EINTR probably requires privilege or being the same user;
but I wouldn't discard ENFILE so easily, if a process starts opening
files.
- The password is longer than PASS_MAX.
The is plausible with physical access. However, at that point, a
keylogger will be a much simpler attack.
And, the attacker must be able to know when the second password is being
introduced, which is not going to be easy.
How to read the password after the leak?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Provoking the leak yourself at the right point by entering a very long
password is easy, and inspecting the process stack at that point should
be doable. Try to find some consistent patterns.
Then, search for those patterns in free memory, right after the victim
leaks their password.
Once you get the leak, a program should read all the free memory
searching for patterns that gpasswd(1) leaves nearby the leaked
password.
On 6/10/23 03:14, Seth Arnold wrote:
> An attacker process wouldn't be able to use malloc(3) for this task.
> There's a handful of tools available for userspace to allocate memory:
>
> - brk / sbrk
> - mmap MAP_ANONYMOUS
> - mmap /dev/zero
> - mmap some other file
> - shm_open
> - shmget
>
> Most of these return only pages of zeros to a process. Using mmap of an
> existing file, you can get some of the contents of the file demand-loaded
> into the memory space on the first use.
>
> The MAP_UNINITIALIZED flag only works if the kernel was compiled with
> CONFIG_MMAP_ALLOW_UNINITIALIZED. This is rare.
>
> malloc(3) doesn't zero memory, to our collective frustration, but all the
> garbage in the allocations is from previous allocations in the current
> process. It isn't leftover from other processes.
>
> The avenues available for reading the memory:
> - /dev/mem and /dev/kmem (requires root, not available with Secure Boot)
> - /proc/pid/mem (requires ptrace privileges, mediated by YAMA)
> - ptrace (requires ptrace privileges, mediated by YAMA)
> - causing memory to be swapped to disk, and then inspecting the swap
>
> These all require a certain amount of privileges.
How to fix it?
~~~~~~~~~~~~~~
memzero(), which internally calls explicit_bzero(3), or whatever
alternative the system provides with a slightly different name, will
make sure that the buffer is zeroed in memory, and optimizations are not
allowed to impede this zeroing.
This is not really 100% effective, since compilers may place copies of
the string somewhere hidden in the stack. Those copies won't get zeroed
by explicit_bzero(3). However, that's arguably a compiler bug, since
compilers should make everything possible to avoid optimizing strings
that are later passed to explicit_bzero(3). But we all know that
sometimes it's impossible to have perfect knowledge in the compiler, so
this is plausible. Nevertheless, there's nothing we can do against such
issues, except minimizing the time such passwords are stored in plain
text.
Security concerns
~~~~~~~~~~~~~~~~~
We believe this isn't easy to exploit. Nevertheless, and since the fix
is trivial, this fix should probably be applied soon, and backported to
all supported distributions, to prevent someone else having more
imagination than us to find a way.
Affected versions
~~~~~~~~~~~~~~~~~
All. Bug introduced in shadow 19990709. That's the second commit in
the git history.
Fixes: 45c6603cc8 ("[svn-upgrade] Integrating new upstream version, shadow (19990709)")
Reported-by: Alejandro Colomar <alx@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Seth Arnold <seth.arnold@canonical.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Balint Reczey <rbalint@debian.org>
Cc: Sam James <sam@gentoo.org>
Cc: David Runge <dvzrv@archlinux.org>
Cc: Andreas Jaeger <aj@suse.de>
Cc: <~hallyn/shadow@lists.sr.ht>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Invert conditional to reduce indentation.
- Reduce use of whitespace and newlines while unindenting.
- Reorder variable declarations.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Invert conditional to reduce indentation.
- Rewrite while loop calling strtok(3) as a for loop. This allows
doing more simplification inside the loop (see next commit).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Fix indentation. It was very broken.
- Move variable declaration to the top of the block in which it's used.
- Reduce use of whitespace and newlines.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Invert conditional, to reduce indentation.
- Reduce use of whitespace and newlines while unindenting.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Merge nested conditionals into a single if, to reduce indentation.
- Indent (1 SP) nested preprocessor conditionals.
- Reduce use of whitespace and newlines while unindenting.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Use the temporary variable more, as it helps readability: it removes
a derefecence, which itself allows removing some parentheses.
- Use a shorter name, which is more common with temporaries, and so
there's less to read.
- Assign to *ranges at the end of the function. It's the same, but
with the other changes, I think this makes it slightly clearer.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If we consider simple objects as arrays of size 1, we can considerably
simplify these APIs, merging the *ARRAY and the non-array variants.
That will produce more readable code, since lines will be shorter (by
not having ARRAY in the macro names, as all macros will consistently
handle arrays), and the allocated size will be also more explicit.
The syntax will now be of the form:
p = MALLOC(42, foo_t); // allocate 42 elements of type foo_t.
p = MALLOC(1, bar_t); // allocate 1 element of type foo_t.
The _array() allocation functions should _never_ be called directly, and
instead these macros should be used.
The non-array functions (e.g., malloc(3)) still have their place, but
are limited to allocating structures with flexible array members. For
any other uses, the macros should be used.
Thus, we don't use any array or ARRAY variants in any code any more, and
they are only used as implementation details of these macros.
Link: <https://software.codidact.com/posts/285898/288023#answer-288023>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
alloca(3) fails silently if not enough memory can be allocated on the
stack. Use checked dynamic allocation instead.
Also drop unnecessary manual NUL assignment, ensured by snprintf(3).
Co-developed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Allocate enough memory for the strings, two slashes and the NUL
terminator.
Reported-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Those comments were written when this function used 64 bits (and
temporary variables of 128 bits). Now it uses 32 bits, with temporaries
of 64 bits, so some values have changed.
Fixes: 2a61122b5e ("Unoptimize the higher part of the domain of csrand_uniform()")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This makes the function fit in less screens. This is to avoid consuming
more natural resources than we have available, and everyone knows the
supply of new-lines on a screen is not a renewable source[1].
Some transformations have been done thanks to free(NULL) being an alias
for loopity_loop(), as defined three comits ago. The real definition of
free(3) that everyone has been hiding is this:
void
free(void *p)
{
if (p == NULL)
loopity_loop();
else
real_free(p);
}
Link: [1] <https://www.kernel.org/doc/html/v6.3/process/coding-style.html#placing-braces-and-spaces>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This was to a loop, as "1234" is to computer security.
No really; a loop that ends in a (forward) goto, and has no continue in it.
Still want a loop? Take two:
#define loopity_loop() do { for (;;) { break; } continue; } while (0-0)
Closes: <https://github.com/shadow-maint/shadow/issues/736>
Easter-egg: 8492dee663 ("subids: support nsswitch")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The permission also need to be checked before process_root_flag() since
that can chroot into non-selinux environment (unavailable selinux mount
point for example).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
- Use SIZE_MAX rather than (size_t)-1, to improve readability.
- Move the only branch that breaks to the first place, so that we
remove an else. This reduces nesting while parsing the code.
- Now that we only have a 2-branch conditional where both branches
assign to the same variable, rewrite it as a ternary, to shorten.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The error handling is performed after the loop. By just calling break it
is possible to reuse the error handling if status is not ERANGE.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
A failure of DUP_FUNCTION is already handled for non-reentrant
function wrapper. Perform the check for reentrant version as well.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
On failure, these are meant to return 0 with errno set. But if
an nss module is loaded, they were returning -ERRNO instead.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
- Don't else after return or fail_exit().
- Prefer == over != (negated logic is more complex to think about it).
- Reduce nesting when reasonable.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There's no reason to report all errors. Bail out at the first one,
which is simpler.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Some errors were being reported in stderr, but then they weren't really
being treated as errors.
If mkdir(2) for EEXIST, it's possible that the sysadmin pre-created the
user dir; don't fail. However, let's keep a log line, for having some
notice that it happened.
Also, run chmod(2) if mkdir(2) failed for EEXIST (so transform the
'else if' into an 'if').
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
OpenSSH and coreutils' chroot call chroot first and then chdir. Doing it
this way is a bit safer because otherwise something could happen between
chdir and chroot to the specified path (like exchange of links) so the
working directory would not end up within the chroot environment.
This is a purely defensive measure.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
This is no real world security fix.
The overflow could occur if too many layered subsystems are encountered
because the function check_perms calls itself recursively.
It would already take a misconfigured system for this to achieve it.
Use an iterative approach by calling the do_check_perms in a loop
instead of calling itself recursively.
As a side note: At least GCC 13 optimized this code and already uses
a jmp in its assembler code. I could only see the stack overflow by
activating address sanitizer which prevented the optimization.
Co-developed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
If a user has home directory "/" and login shell "*" then login and su
enter an endless loop by constantly switching to the next subsystem.
This could also be achieved with a layered approach so just checking
for "/" as home directory is not enough to protect against such a
misconfiguration.
Just break the loop if it progressed too far. I doubt that this has
negative impact on any real setup.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
If econf_getStringValue() fails, it will return an error and
set value to NULL. Look for the error and avoid dereferencing
value in that case.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
The function is completely different based on USE_CONF. Either copy
will be easier to read if we just keep them completely separate.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
You can see the memory leaks with address sanitizer if shadow is
compiled with `--enable-vendordir=/usr/etc`.
How to reproduce:
1. Prepare a custom shell file as root
```
mkdir -p /etc/shells.d
echo /bin/myshell > /etc/shells.d/custom
```
2. Run chsh as regular user
```
chsh
```
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The getusershell implementation of musl returns every line within the
/etc/shells file, which even includes comments. Only consider absolute
paths for login shells.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Using --prefix in a setuid binary is quite dangerous. An unprivileged
user could prepare a custom shadow file in home directory. During a data
race the user could exchange directories with links which could lead to
exchange of shadow file in system's /etc directory.
This could be used for local privilege escalation.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Please find attached the french updated translation of shadow-man-page,
proofread by the debian-l10n-french mailing list contributors.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Neither a pid_t below 1 nor a negative fd could be valid in this context.
Proof of Concept:
$ newuidmap -1 1 1 1
newuidmap: Could not open proc directory for target 4294967295
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Some strings are first written into static char arrays before passed to
functions which expect a const char pointer anyway.
It is easier to pass these strings directly as arguments.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
The fcntl call to set FD_CLOEXEC can be performed directly with the
previously performed open call by using the O_CLOEXEC flag.
O_CLOEXEC is required by POSIX.1-2008.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
The only user of login_prompt is the login tool. This implies that the
first argument is always the same.
It is much easier to verify printf's format string and its argument if
both are next to each other.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Parsing optional environment variables after a login name is a feature
which is neither documented nor available in util-linux or busybox
login which are other wide spread login utilities used in Linux
distributions as reference.
Removing this feature resolves two issues:
- A memory leak exists if variables without an equal sign are used,
because set_env creates copies on its own. This could lead to OOM
situations in privileged part of login or may lead to heap spraying.
- Environment variables are not reset between login attempts. This
could lead to additional environment variables set for a user who
never intended to do so.
Proof of Concept on a system with shadow login without PAM and
util-linux agetty:
1. Provoke an invalid login, e.g. user `noone` and password `invalid`.
This starts shadow login and subsequent inputs are passed through
the function login_prompt.
2. Provoke an invalid login with environment variables, e.g.
user `noone HISTFILE=/tmp/owo` and password `invalid`.
3. Log in correctly with user `root`.
Now you can see with `echo $HISTFILE` that `/tmp/owo` has been set for
the root user.
This requires a malicious failed login attempt and a successful login
within the configured login timeout (default 60 seconds).
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
The getline function does not return a pointer but the amount of read
characters. The error return value to check for is -1.
Set buf to NULL to avoid dereference of an uninitialized stack value.
The getline function returns -1 if size argument is NULL. Always use
a valid pointer even if size is unimportant.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Add the relevant XKCD to the passwd(1) manual page. It already explains
most of the rationale behind this patch.
Add also reference to makepasswd(1), which is a good way to generate
strong passwords. Personally, I commonly run `makepasswd --chars 64` to
create my passwords, or 32 for passwords I need to type interactively
often.
The strength of a password is an exponential formula, where the base is
the size of the character set, and the exponent is the length of the
password. That already shows why long passwords of just lowercase
letters are better than short Pa$sw0rdZ3. But an even more important
point is that humans, when forced to use symbols in a password, are more
likely to do trivial substitutions on simple passwords, which doesn't
increase strength, and can instead give a false sense of strength, which
is dangerous.
Closes: <https://github.com/shadow-maint/shadow/issues/688>
Link: <https://xkcd.com/936/>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Destroying the handle does not actually disconnect, see [1].
Also free the key on user removal.
[1]: e9072e7d45/libsemanage/src/direct_api.c (L330)
Example adduser leak:
Direct leak of 1008 byte(s) in 14 object(s) allocated from:
#0 0x5638f2e782ae in __interceptor_malloc (./src/useradd+0xee2ae)
#1 0x7fb5cfffad09 in dbase_file_init src/database_file.c:170:45
Direct leak of 392 byte(s) in 7 object(s) allocated from:
#0 0x5638f2e782ae in __interceptor_malloc (./src/useradd+0xee2ae)
#1 0x7fb5cfffc929 in dbase_policydb_init src/database_policydb.c:187:27
Direct leak of 144 byte(s) in 2 object(s) allocated from:
#0 0x5638f2e782ae in __interceptor_malloc (./src/useradd+0xee2ae)
#1 0x7fb5cfffb519 in dbase_join_init src/database_join.c:249:28
[...]
Free the actual struct of the removed entry.
Example userdel report:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x55b230efe857 in reallocarray (./src/userdel+0xda857)
#1 0x55b230f6041f in mallocarray ./lib/./alloc.h:97:9
#2 0x55b230f6041f in commonio_open ./lib/commonio.c:563:7
#3 0x55b230f39098 in open_files ./src/userdel.c:555:6
#4 0x55b230f39098 in main ./src/userdel.c:1189:2
#5 0x7f9b48c64189 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
run_parts currently exists in useradd and userdel, this commit mirrors
the functionality with groupadd and groupdel
Hook for group{add,del} to include killing processes that have group
membership that would no longer exist to avoid membership ID reuse.
getline(3) is much more readable than manually looping. It has some
overhead due to the allocation of a buffer, but that shouldn't be a
problem here. If that was a problem, we could reuse the buffer (thus
making the function non-reentrant), but I don't think that's worth the
extra complexity.
Using rpmatch(3) instead of a simple y/n test provides i18n to the
response checking. We have a fall-back minimalistic implementation for
systems that lack this function (e.g., musl libc).
While we're at it, apply some other minor improvements to this file:
- Remove comment saying which files use this function. That's likely
to get outdated. And anyway, it's just a grep(1) away, so it doesn't
really add any value.
- Remove unnecessary casts to (void) that were used to verbosely ignore
errors from stdio calls. They add clutter without really adding much
value to the code (or I don't see it).
- Remove comments from the function body. They make the function less
readable. Instead, centralize the description of the function into a
man-page-like comment before the function definition. This keeps the
function body short and sweet.
- Add '#include <stdbool.h>', which was missing.
- Minor whitespace style changes (it doesn't hurt the diff at this
point, since most of the affected lines were already touched by other
changes, so I applied my preferred style :).
Acked-by: Samanta Navarro <ferivoz@riseup.net>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The tools newgrp and useradd expect waitpid to behave as described in
its manual page. But the notes indicate that if SIGCHLD is ignored,
waitpid behaves differently.
A user could set SIGCHLD to ignore before starting newgrp through exec.
Children of newgrp would not become zombies and their PIDs could be
reassigned before newgrp could call kill with the child pid and SIGCONT.
The useradd tool is not installed setuid, but I have added the default
there as well (copied from vipw).
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Do not stop after 79 characters. Read the complete line to avoid
arbitrary limitations.
Proof of Concept:
```
cat > passwd-poc << EOF
root:x:0:0:root:/root:/bin/bash
root:x:0:0:root:/root:/bin/bash
root:x:0:0:root:/root:/bin/bash
EOF
python -c "print(80*'y')" | pwck passwd-poc
```
Two lines should still be within the file because we agreed only once
to remove a duplicated line.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
If make fails in a multi-process invocation, the log is pretty much
unreadable. To make it readable, build as much as can be built without
failing. Then run a single-process make again. If we succeeded
previously, this should be a no-op. If not, this run will stop at the
first error, which should be more readable, and will only print the few
lines we're interested in.
This has some side effects: Now we build as much as we can, instead of
failing as early as possible; this may make CI a bit slower. However,
it also has the benefit that you see _all_ the error messages that could
be given, instead of needing to fix the first error to see the next and
so on.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
libbsd-devel libeconf-devel have already been added to the spec file and
they should be installed by the `dnf builddep` command.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
e5905c4b ("Added control character check") introduced checking for
control characters but had the logic inverted, so it rejects all
characters that are not control ones.
Cast the character to `unsigned char` before passing to the character
checking functions to avoid UB.
Use strpbrk(3) for the illegal character test and return early.
Both semanage and libsemanage actually set the user's mls range to the
default of the seuser, which makes more sense and removes a bit of code
for usermod and useradd. More fine-grained details must always be set
with some other tool
(semanage) anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The --gid option accepts a group name or id. When a name is provided, it
is resolved to an id by looking up the name in the group database
(/etc/group).
The --prefix option overides the location of the passwd and group
databases. I suspect the --gid option was overlooked when wiring up the
--prefix option.
useradd --gid already respects --prefix; this change makes usermod
behave the same way.
Fixes: b6b2c756c9
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
This commit will serve to document why we shouldn't worry about the
truncation in the call to strlcpy(3). Since we have one more byte in
tmptty than in full_tty, truncation will produce a string that is at
least one byte longer than full_tty. Such a string could never compare
equal, so we're actually handling the truncation in a clever way. Maybe
too clever, but that's why I'm documenting it here.
Now, about the simplification itself:
Since we made sure that both full_tty and tmptty are null-terminated, we
can call strcmp(3) instead of strncmp(3). We can also simplify the
return logic avoiding one branch.
Cc: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
* libmisc/utmp.c (is_my_tty): Declare the parameter as a char array,
not char *, as it is not necessarily null-terminated.
Avoid a read overrun when reading 'tty', which comes from
'ut_utname'.
Reported-by: Paul Eggert <eggert@cs.ucla.edu>
Co-developed-by: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
* libmisc/date_to_str.c (date_to_str): Do not crash if gmtime(3)
returns NULL because the timestamp is far in the future.
Reported-by: Paul Eggert <eggert@cs.ucla.edu>
Co-developed-by: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
* lib/gshadow.c (sgetsgent): Use strcpy(3) not strlcpy(3),
since the string is known to fit.
Signed-off-by: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
* lib/fields.c (change_field): Don't point
before array start; that has undefined behavior.
Signed-off-by: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
* lib/fields.c (change_field): Since we know the string fits,
use strcpy(3) rather than strlcpy(3).
Signed-off-by: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Iker Pedrosa <ipedrosa@redhat.com>
gettime.c:25:30: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
/*@observer@*/time_t gettime ()
^
void
shellcheck warns against using echo with flags, as posix sh won't
support it. It suggests using printf, so let's do that.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
bc github...
For some reason, the first test - ONLY on github - seems to not
give the '$ ' prompt expected when you spawn 'su testsuite'.
So just run the first test twice, and ignore the first failure.
It messes with the expected results.
We can do better than this in the expect scripts, but let's
get things running for now.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
write_mapping() will do the following:
openat(proc_dir_fd, map_file, O_WRONLY);
An attacker could create a directory containing a symlink named
"uid_map" pointing to any file owned by root, and thus allow him to
overwrite any root-owned file.
Closes#635
newuidmap and newgidmap currently take an integner pid as
the first argument, determining the process id on which to
act. Accept also "fd:N", where N must be an open file
descriptor to the /proc/pid directory for the process to
act upon. This way, if you
exec 10</proc/99
newuidmap fd:10 100000 0 65536
and pid 99 dies and a new process happens to take pid 99 before
newuidmap happens to do its work, then since newuidmap will use
openat() using fd 10, it won't change the mapping for the new
process.
Example:
// terminal 1:
serge@jerom ~/src/nsexec$ ./nsexec -W -s 0 -S 0 -U
about to unshare with 10000000
Press any key to exec (I am 129176)
// terminal 2:
serge@jerom ~/src/shadow$ exec 10</proc/129176
serge@jerom ~/src/shadow$ sudo chown root src/newuidmap src/newgidmap
serge@jerom ~/src/shadow$ sudo chmod u+s src/newuidmap
serge@jerom ~/src/shadow$ sudo chmod u+s src/newgidmap
serge@jerom ~/src/shadow$ ./src/newuidmap fd:10 0 100000 10
serge@jerom ~/src/shadow$ ./src/newgidmap fd:10 0 100000 10
// Terminal 1:
uid=0(root) gid=0(root) groups=0(root)
Signed-off-by: Serge Hallyn <serge@hallyn.com>
We can't use a pointer that was input to realloc(3), nor any pointers
that point to reallocated memory, without making sure that the memory
wasn't moved. If we do, the Behavior is Undefined.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use of these macros, apart from the benefits mentioned in the commit
that adds the macros, has some other good side effects:
- Consistency in getting the size of the object from sizeof(type),
instead of a mix of sizeof(type) sometimes and sizeof(*p) other
times.
- More readable code: no casts, and no sizeof(), so also shorter lines
that we don't need to cut.
- Consistency in using array allocation calls for allocations of arrays
of objects, even when the object size is 1.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This macros have several benefits over the standard functions:
- The type of the allocated object (not the pointer) is specified as an
argument, which improves readability:
- It is directly obvious what is the type of the object just by
reading the macro call.
- It allows grepping for all allocations of a given type.
This is admittedly similar to using sizeof() to get the size of the
object, but we'll see why this is better.
- In the case of reallocation macros, an extra check is performed to
make sure that the previous pointer was compatible with the allocated
type, which can avoid some mistakes.
- The cast is performed automatically, with a pointer type derived from
the type of the object. This is the best point of this macro, since
it does an automatic cast, where there's no chance of typos.
Usually, programmers have to decide whether to cast or not the result
of malloc(3). Casts usually hide warnings, so are to be avoided.
However, these functions already return a void *, so a cast doesn't
really add much danger. Moreover, a cast can even add warnings in
this exceptional case, if the type of the cast is different than the
type of the assigned pointer. Performing a manual cast is still not
perfect, since there are chances that a mistake will be done, and
even ignoring accidents, they clutter code, hurting readability.
And now we have a cast that is synced with sizeof.
- Whenever the type of the object changes, since we perform an explicit
cast to the old type, there will be a warning due to type mismatch in
the assignment, so we'll be able to see all lines that are affected
by such a change. This is especially important, since changing the
type of a variable and missing to update an allocation call far away
from the declaration is easy, and the consequences can be quite bad.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We'll expand the contents in a following commit, so let's move the file
to a more generic name, have a dedicated header, and update includes.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use the new header for xstrdup()
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This is guaranteed by ISO C. Now that we require ISO C (and even POSIX)
to compile, we can simplify this code.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
On 2/19/23 18:09, David Mudrich wrote:
> I am working on a RAM based Linux OS from source, and try to use
> latest versions of all software. I found shadow needs libbsd's
> readpassphrase(3) as superior alternative to getpass(3). While
> considering if I a) include libbsd, or include libbsd's code of
> readpassphrase(3) into shadow, found, that libbsd's readpassphrase(3)
> never returns \n or \r
> <https://cgit.freedesktop.org/libbsd/tree/src/readpassphrase.c>
> line 122, while agetpass() uses a check for \n in agetpass.c line 108.
> I assume it always fails.
Indeed, it always failed. I made a mistake when writing agetpass(),
assuming that readpassphrase(3) would keep newlines.
>
> I propose a check of len == PASS_MAX - 1, with false positive error for
> exactly PASS_MAX - 1 long passwords.
Instead, I added an extra byte to the allocation to allow a maximum
password length of PASS_MAX (which is the maximum for getpass(3), which
we're replacing.
While doing that, I notice that my previous implementation also had
another bug (minor): The maximum password length was PASS_MAX - 1
instead of PASS_MAX. That's also fixed in this commit.
Reported-by: David Mudrich <dmudrich@gmx.de>
Fixes: 155c9421b9 ("libmisc: agetpass(), erase_pass(): Add functions for getting passwords safely")
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Some programs don't support `(uint16_t) -1` or `(uint32_t) -1` as user
or group IDs. This is because `-1` is used as an error code or as an
unspecified ID, e.g. in `chown(2)` parameters, and in the past, `gid_t`
and `uid_t` have changed width. For legacy reasons, those values have
been kept reserved in programs today (for example systemd does this; see
the documentation in the link below).
This should not be confused with catching overflow in the ID values,
since that is already caught by our ERANGE checks. This is about not
using reserved values that have been reserved for legacy reasons.
Link: <https://systemd.io/UIDS-GIDS/>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These comments should indicate which functions they really wrap.
An alternative would be to remove the line completely to avoid
future copy&paste mistakes.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
This function simplifies the calculation of the bounds of the buffer for
catenating strings. It would also reduce error checking, but we don't
care about truncation in this specific code. :)
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strncat(3), strlcpy(3), and many other functions are often misused for
catenating strings, when they should never be used for that. strlcat(3)
is good. However, there's no equivalent to strlcat(3) similar to
snprintf(3). Let's add stpecpy(), which is similar to strlcat(3), but
it is also the only function compatible with stpeprintf(), which makes
it more useful than strlcat(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
All the string-copying functions called above do terminate the strings
they create with a NUL byte. Writing it again at the end of the buffer
is unnecessary paranoid code. Let's remove it.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This function allows reducing error checking (since errors are
propagated across chained calls), and also simplifies the calculation of
the start and end of the buffer where the string should be written.
Moreover, the new code is more optimized, since many calls to strlen(3)
have been removed.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
[v]stpeprintf() are similar to [v]snprintf(3), but they allow chaining.
[v]snprintf(3) are very dangerous for catenating strings, since the
obvious ways to do it invoke Undefined Behavior, and the ways that avoid
UB are very error-prone.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
When trying to build shadow in a different directory I stumbled upon few
issues, this commit aims to fix all of them:
- The `subid.h` file is generated and hence in the build directory and
not in the source directory, so use `$(builddir)` instead of
`$(srcdir)`.
- Using `$<` instead of filenames utilises autotools to locate the files
in either the source or build directory automatically.
- `xsltproc` needs to access the files in login.defs.d in either the
source directory or the symlink in a language subdirectory, but it
does not interpret the `--path` as prefix of the entity path, but
rather a path under which to locate the basename of the entity
from the XML file. So specify the whole path to login.defs.d.
- The above point could be used to make the symlinks of login.defs.d
and entity path specifications in the XMLs obsolete, but I trying
not to propose possibly disrupting patches, so for the sake of
simplicity just specify `$(srcdir)` when creating the symlink.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The intention of the code is just to not report an error message when
'typefile' doesn't exist. If we call access(2) and then fopen(2),
there's a race. It's not a huge problem, and the worst thing that can
happen is reporting an error when the file has been removed after
access(2). It's not a problem, but we can fix the race and at the same
time clarify the intention of not warning about ENOENT and also remove
one syscall. Seems like a win-win.
Suggested-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Every non-const pointer converts automatically to void *.
- Every pointer converts automatically to void *.
- void * converts to any other pointer.
- const void * converts to any other const pointer.
- Integer variables convert to each other.
I changed the declaration of a few variables in order to allow removing
a cast.
However, I didn't attempt to edit casts inside comparisons, since they
are very delicate. I also kept casts in variadic functions, since they
are necessary, and in allocation functions, because I have other plans
for them.
I also changed a few casts to int that are better as ptrdiff_t.
This change has triggered some warnings about const correctness issues,
which have also been fixed in this patch (see for example src/login.c).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We could use the standard (C11) _Noreturn qualifier, but it will be
deprecated in C23, and replaced by C++'s [[noreturn]], which is
compatible with the GCC attribute, so let's directly use the attribute,
and in the future we'll be able to switch to [[]].
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Recently, we removed support for 'struct utmpx'. We did it because utmp
and utmpx are identical, and while POSIX specifies utmpx (and not utmp),
GNU/Linux documentation seems to favor utmp. Also, this project
defaulted to utmp, so changing to utmpx would be more dangerous than
keeping old defaults, even if it's supposed to be the same.
Now, I just found more code that didn't make much sense: lib/utent.c
provides definitions for getutent(3) and friends in case the system
doesn't provide them, but we don't provide prototypes for those
definitions, so code using the functions would have never compiled.
Let's just remove these definitions as dead code.
Fixes: 3be7b9d75a ("Remove traces of utmpx")
Fixes: 170b76cdd1 ("Disable utmpx permanently")
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Closes#457
The existing prose was confusing, or simply wrong. Make it clear
that only the group ownership of the tty is affected, and how.
Also move the paragraph about defaults after the discussion of
acceptable TTYGROUPs, as this seems more natural.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
In variadic functions we still do the cast. In POSIX, it's not
necessary, since NULL is required to be of type 'void *', and 'void *'
is guaranteed to have the same alignment and representation as 'char *'.
However, since ISO C still doesn't mandate that, and moreover they're
doing dubious stuff by adding nullptr, let's be on the cautious side.
Also, C++ requires that NULL is _not_ 'void *', but either plain 0 or
some magic stuff.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If lines start with '\0' then it is possible to trigger out of
boundary accesses.
Check if indices are valid before accessing them.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
If the file referenced by ENV_TZ has a zero length string, then an out
of boundary write occurs. Also the result can be wrong because it is
assumed that the file will always end with a newline.
Only override a newline character with '\0' to avoid these cases.
This cannot be considered to be security relevant because login.defs
and its contained references to system files should be trusted to begin
with.
Proof of Concept:
1. Compile shadow's su with address sanitizer and --without-libpam
2. Setup your /etc/login.defs to contain ENV_TZ=/etc/tzname
3. Prepare /etc/tzname to contain a '\0' byte at the beginning
`python -c "print('\x00')" > /etc/tzname`
4. Use su
`su -l`
You can see the following output:
`tz.c:45:8: runtime error: index 18446744073709551615 out of bounds for type 'char [8192]'`
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
We do need the unoptimized version of csrand_uniform() for high values
of `n`, since the optimized version depends on having __int128, and it's
not available on several platforms, including ARMv7, IA32, and MK68k.
This reverts commit 848f53c1d3c1362c86d3baab6906e1e4419d2634; however,
I applied some tweaks to the reverted commit.
Reported-by: Adam Sampson <ats@offog.org>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Now that we optimized csrand_uniform(), we don't need these functions.
This reverts commit 7c8fe291b1260e127c10562bfd7616961013730f.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use a different algorithm to minimize rejection. This is essentially
the same algorithm implemented in the Linux kernel for
__get_random_u32_below(), but written in a more readable way, and
avoiding microopimizations that make it less readable.
Which (the Linux kernel implementation) is itself based on Daniel
Lemire's algorithm from "Fast Random Integer Generation in an Interval",
linked below. However, I couldn't really understand that paper very
much, so I had to reconstruct the proofs from scratch, just from what I
could understand from the Linux kernel implementation source code.
I constructed some graphical explanation of how it works, and why it
is optimal, because I needed to visualize it to understand it. It is
published in the GitHub pull request linked below.
Here goes a wordy explanation of why this algorithm based on
multiplication is better optimized than my original implementation based
on masking.
masking:
It discards the extra bits of entropy that are not necessary for
this operation. This works as if dividing the entire space of
possible csrand() values into smaller spaces of a size that is
a smaller power of 2. Each of those smaller spaces has a
rejection band, so we get as many rejection bands as spaces
there are. For smaller values of 'n', the size of each
rejection band is smaller, but having more rejection bands
compensates for this, and results in the same inefficiency as
for large values of 'n'.
multiplication:
It divides the entire space of possible random numbers in
chunks of size exactly 'n', so that there is only one rejection
band that is the remainder of `2^64 % n`. The worst case is
still similar to the masking algorithm, a rejection band that is
almost half the entire space (n = 2^63 + 1), but for lower
values of 'n', by only having one small rejection band, it is
much faster than the masking algorithm.
This algorithm, however, has one caveat: the implementation
is harder to read, since it relies on several bitwise tricky
operations to perform operations like `2^64 % n`, `mult % 2^64`,
and `mult / 2^64`. And those operations are different depending
on the number of bits of the maximum possible random number
generated by the function. This means that while this algorithm
could also be applied to get uniform random numbers in the range
[0, n-1] quickly from a function like rand(3), which only
produces 31 bits of (non-CS) random numbers, it would need to be
implemented differently. However, that's not a concern for us,
it's just a note so that nobody picks this code and expects it
to just work with rand(3) (which BTW I tried for testing it, and
got a bit confused until I realized this).
Finally, here's some light testing of this implementation, just to know
that I didn't goof it. I pasted this function into a standalone
program, and run it many times to find if it has any bias (I tested also
to see how many iterations it performs, and it's also almost always 1,
but that test is big enough to not paste it here).
int main(int argc, char *argv[])
{
printf("%lu\n", csrand_uniform(atoi(argv[1])));
}
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
341
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
339
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
338
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
336
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
328
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
335
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
332
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
331
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
327
This isn't a complete test for a cryptographically-secure random number
generator, of course, but I leave that for interested parties.
Link: <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e9a688bcb19348862afe30d7c85bc37c4c293471>
Link: <https://github.com/shadow-maint/shadow/pull/624#discussion_r1059574358>
Link: <https://arxiv.org/abs/1805.10941>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Sam James <sam@gentoo.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
[Daniel Lemire: Added link to research paper in source code]
Cc: Daniel Lemire <daniel@lemire.me>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
It is common to use the expression 'sizeof(x) * CHAR_BIT' to mean the
width in bits of a type or object. Now that there are _WIDTH macros for
some types, indicating the number of bits that they use, it makes sense
to wrap this calculation in a macro of a similar name.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This API is similar to arc4random_uniform(3). However, for an input of
0, this function is equivalent to csrand(), while arc4random_uniform(0)
returns 0.
This function will be used to reimplement csrand_interval() as a wrapper
around this one.
The current implementation of csrand_interval() doesn't produce very good
random numbers. It has a bias. And that comes from performing some
unnecessary floating-point calculations that overcomplicate the problem.
Looping until the random number hits within bounds is unbiased, and
truncating unwanted bits makes the overhead of the loop very small.
We could reduce loop overhead even more, by keeping unused bits of the
random number, if the width of the mask is not greater than
ULONG_WIDTH/2, however, that complicates the code considerably, and I
prefer to be a bit slower but have simple code.
BTW, Björn really deserves the copyright for csrand() (previously known
as read_random_bytes()), since he rewrote it almost from scratch last
year, and I kept most of its contents. Since he didn't put himself in
the copyright back then, and BSD-3-Clause doesn't allow me to attribute
derived works, I won't add his name, but if he asks, he should be put in
the copyright too.
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Sam James <sam@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
These functions implement bit manipulation APIs, which will be added to
C23, so that in the far future, we will be able to replace our functions
by the standard ones, just by adding the stdc_ prefix, and including
<stdbit.h>.
However, we need to avoid UB for an input of 0, so slightly deviate from
C23, and use a different name (with _wrap) for distunguishing our API
from the standard one.
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
arc4random(3) returns a number.
arc4random_buf(3) fills a buffer.
arc4random_uniform(3) returns a number less than a bound.
and I'd add a hypothetical one which we use:
*_interval() should return a number within the interval [min, max].
In reality, the function being called csrand() in this patch is not
really cryptographically secure, since it had a bias, but a subsequent
patch will fix that.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We were always casting the result to u_long. Better just use that type
in the function. Since we're returning u_long, it makes sense to also
specify the input as u_long. In fact, that'll help for doing bitwise
operations inside this function.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
I have plans to split this function in smaller functions that implement
bits of this functionallity, to simplify the implementation. So, let's
use names that distinguish them.
This one produces a number within an interval, so make that clear. Also
make clear that the function produces cryptographically-secure numbers.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strlcpy(3) might not be visible since it is declared in <bsd/string.h>.
This can lead to warnings, like:
fields.c: In function 'change_field':
fields.c:103:17: warning: implicit declaration of function 'strlcpy'; did you mean 'strncpy'? [-Wimplicit-function-declaration]
103 | strlcpy (buf, cp, maxsize);
| ^~~~~~~
| strncpy
../lib/fields.c:103:17: warning: type of 'strlcpy' does not match original declaration [-Wlto-type-mismatch]
103 | strlcpy (buf, cp, maxsize);
| ^
/usr/include/bsd/string.h:44:8: note: return value type mismatch
44 | size_t strlcpy(char *dst, const char *src, size_t siz);
| ^
/usr/include/bsd/string.h:44:8: note: type 'size_t' should match type 'int'
/usr/include/bsd/string.h:44:8: note: 'strlcpy' was previously declared here
/usr/include/bsd/string.h:44:8: note: code may be misoptimized unless '-fno-strict-aliasing' is used
Comparisons if different signedness can result in unexpected results.
Add casts to ensure operants are of the same type.
gettime.c: In function 'gettime':
gettime.c:58:26: warning: comparison of integer expressions of different signedness: 'long long unsigned int' and 'time_t' {aka 'long int'} [-Wsign-compare]
58 | } else if (epoch > fallback) {
| ^
Cast to time_t, since epoch is less than ULONG_MAX at this point.
idmapping.c: In function 'write_mapping':
idmapping.c:202:48: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
202 | if ((written <= 0) || (written >= (bufsize - (pos - buf)))) {
| ^~
newgidmap.c: In function ‘main’:
newgidmap.c:178:40: warning: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Wsign-compare]
178 | if ((written <= 0) || (written >= sizeof(proc_dir_name))) {
| ^~
newuidmap.c: In function ‘main’:
newuidmap.c:107:40: warning: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Wsign-compare]
107 | if ((written <= 0) || (written >= sizeof(proc_dir_name))) {
| ^~
Instead of using volatile pointers to prevent the compiler from
optimizing the call away, use a memory barrier.
This requires support for embedded assembly, which should be fine after
the recent requirement bumps.
memset_s() has a different signature than memset(3) or explicit_bzero(),
thus the current code would not compile. Also memset_s()
implementations are quite rare.
Use the C23 standardized version memset_explicit(3).
Fixes: 7a799ebb ("Ensure memory cleaning")
Login timed out message prints only first few bytes when write is immediately followed by exit.
Calling exit from new handler provides enough time to display full message.
Commit 90424e7c ("Don't warn when failed to open /etc/nsswitch.conf")
removed the logging for failing to read /etc/nsswitch.conf to reduce the
noise in the case the file does not exists (e.g. musl based systems).
Reintroduce a warning if /etc/nsswitch.conf exists but we failed to read
it (e.g. permission denied).
Improves: 90424e7c ("Don't warn when failed to open /etc/nsswitch.conf")
gethostbyname(3) was removed in POSIX.1-2008. It has been obsoleted,
and replaced by getaddrinfo(3), which is superior in several ways:
- gethostbyname(3) is not reentrant. There's a GNU extension,
gethostbyname_r(3) which is reentrant, but it's not likely to be
standardized for the following reason. And we don't care too much
about this point either.
- gethostbyname(3) only supports IPv4, but getaddrinfo(3) supports both
IPv4 and IPv6 (and may support other address families in the future).
We don't care about reentrancy, so for keeping the code simple (i.e.,
not touch call site to add code to free(3) an allocated buffer), I added
a static buffer for inet_ntop(3). We could address that in the future,
but I don't think it's worth it.
BTW, we also replace inet_ntoa(3) by inet_ntop(3), as a consequence of
using getaddrinfo(3). inet_ntoa(3) is also marked as deprecated, but
that deprecation seems to have been documented only in the manual page,
and POSIX doesn't mark it as deprecated. The deprecation notice goes
back to when the inet_ntop(3) manual page was added by Sam Varshavchik
to the Linux man-pages in version 1.30 (year 2000).
So, this, apart from updating the code to POSIX.1-2008, is also adding
support for IPv6 :) Although, probably many other parts of the code are
written for IPv4 only, so I wouldn't yet claim support for it.
A few notes:
- I didn't check the return value of inet_ntop(3), since it can't fail
for the given input:
- EAFNOSUPPORT: We only call it with AF_INET and AF_INET6.
- ENOSPC: We calculate the size of the buffer to be wide enough:
MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) so it always fits.
Cc: Dave Hagewood <admin@arrowweb.com>
Cc: Sam Varshavchik
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Systems can suffer power interruptions whilst .lock files are in /etc,
preventing scripts and other automation tools from updating shadow's
files which persist across boots.
This commit replaces that mechanism with file locking to avoid problems
of power interruption/crashing.
Minor tweak to groupmems man page, requested by 'xx' on IRC.
Signed-off-by: ed neville <ed@s5h.net>
When the caller may not change the room number, work phone, or
home number, then rather than prompting for the new one it will
print the existing one. But due to a typo it printed the full name
in place of each of those.
Fix the fields being printed.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
- Since strncpy(3) is not designed to write strings, but rather
(null-padded) character sequences (a.k.a. unterminated strings), we
had to manually append a '\0'. strlcpy(3) creates strings, so they
are always terminated. This removes dependencies between lines, and
also removes chances of accidents.
- Repurposing strncpy(3) to create strings requires calculating the
location of the terminating null byte, which involves a '-1'
calculation. This is a source of off-by-one bugs. The new code has
no '-1' calculations, so there's almost-zero chance of these bugs.
- strlcpy(3) doesn't padd with null bytes. Padding is relevant when
writing fixed-width buffers to binary files, when interfacing certain
APIs (I believe utmpx requires null padding at lease in some
systems), or when sending them to other processes or through the
network. This is not the case, so padding is effectively ignored.
- strlcpy(3) requires that the input string is really a string;
otherwise it crashes (SIGSEGV). Let's check if the input strings are
really strings:
- lib/fields.c:
- 'cp' was assigned from 'newft', and 'newft' comes from fgets(3).
- lib/gshadow.c:
- strlen(string) is calculated a few lines above.
- libmisc/console.c:
- 'cons' comes from getdef_str, which is a bit cryptic, but seems
to generate strings, I guess.1
- libmisc/date_to_str.c:
- It receives a string literal. :)
- libmisc/utmp.c:
- 'tname' comes from ttyname(3), which returns a string.
- src/su.c:
- 'tmp_name' has been passed to strcmp(3) a few lines above.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Since the project is supposed to be POSIX.1-2001 compliant it doesn't
make sense to have that added conditionally.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
It is Undefined Behavior to declare errno (see NOTES in its manual page).
Instead of using the errno dummy declaration, use one that doesn't need
a comment.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Previous commits, to keep readability of the diffs, left the code that
was previously wrapped by preprocessor coditionals untouched. Apply
some minor cosmetic changes to merge it in the surrounding code.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- USER_NAME_MAX_LENGTH was being calculated in terms of utmpx. Do it
in terms of utmp.
- Remove utmpx support from the whishlist.
- Remove unused tests about utmpx members.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
On Linux, utmpx and utmp are identical. However, documentation (manual
pages) covers utmp, and just says about utmpx that it's identical to
utmp. It seems that it's preferred to use utmp, at least by reading the
manual pages.
Moreover, we were defaulting to utmp (utmpx had to be explicitly enabled
at configuration time). So, it seems safer to just make it permanent,
which should not affect default builds.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We already made that assumption in commit b47aa1e9aa. While the
header is not required by POSIX (it is an XSI extension), it is defined
in systems that are of interest to this project (GNU/Linux).
Fixes: b47aa1e9aa ("Assume <utmpx.h> exists")
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
When useradd sends its ADD_USER event, it is filling in the id field. This is not yet written to disk. When auditd sees the event and the log format is enriched, auditd tries to lookup the user name but it does not exist. This causes the event to never be resolvable since ausearch relies on the lookup information attached by auditd.
The fix is to not send the id information for any event until after close_files() is called. Just the acct field is all that is
Patch by Steve Grubb (afaik).
Reported at https://bugzilla.redhat.com/show_bug.cgi?id=1713432
The OSes that are referred to by these comments, are extinct, but
their comments survived, fossilized in amber.
Reported-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
In a previous commit, we made USE_TERMIOS unconditionally defined.
Let's just remove it, and remove the condition everywhere.
Reported-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
All of the macros we're using are required by POSIX.1-2001.
Cc: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The function is obsolete. It is recommended to use getrlimit(2) instead
(see the manual page for ulimit(3) or the POSIX manual for it). Since
getrlimit(2) is required by POSIX.1-2001, we can rely on it.
Cc: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Clang doesn't implement this attribute and reports an error. Work
around it by hiding it in a macro that will be empty in clang.
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There are several issues with getpass(3).
Many implementations of it share the same issues that the infamous
gets(3). In glibc it's not so terrible, since it's a wrapper
around getline(3). But it still has an important bug:
If the password is long enough, getline(3) will realloc(3) memory,
and prefixes of the password will be laying around in some
deallocated memory.
See the getpass(3) manual page for more details, and especially
the commit that marked it as deprecated, which links to a long
discussion in the linux-man@ mailing list.
So, readpassphrase(3bsd) is preferrable, which is provided by
libbsd on GNU systems. However, using readpassphrase(3) directly
is a bit verbose, so we can write our own wrapper with a simpler
interface similar to that of getpass(3).
One of the benefits of writing our own interface around
readpassphrase(3) is that we can hide there any checks that should
be done always and which would be error-prone to repeat every
time. For example, check that there was no truncation in the
password.
Also, use malloc(3) to get the buffer, instead of using a global
buffer. We're not using a multithreaded program (and it wouldn't
make sense to do so), but it's nice to know that the visibility of
our passwords is as limited as possible.
erase_pass() is a clean-up function that handles all clean-up
correctly, including zeroing the entire buffer, and then
free(3)ing the memory. By using [[gnu::malloc(erase_pass)]], we
make sure that we don't leak the buffers in any case, since the
compiler will be able to enforce clean up.
Link: <https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit?id=7ca189099d73bde954eed2d7fc21732bcc8ddc6b>
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The missing #include <gshadow.h> causes the configure check to fail
spuriously, resulting in HAVE_SHADOWGRP not being defined even
on systems that actually have sgetsgent (such as current glibc).
Allow supplementary groups to be set via the /etc/default/useradd config
file. Allowing an administrator to set additonal groups via the GROUPS
configurable and control the default behaviour of useradd.
This program has 10 calls to gets(3) according to grep(1). That
makes it a very unsafe program which should not be used at all.
Let's kill the program already.
See what gets(3) has to say:
SYNOPSIS
#include <stdio.h>
[[deprecated]] char *gets(char *s);
DESCRIPTION
Never use this function.
...
BUGS
Never use gets(). Because it is impossible to tell with‐
out knowing the data in advance how many characters
gets() will read, and because gets() will continue to
store characters past the end of the buffer, it is ex‐
tremely dangerous to use. It has been used to break com‐
puter security. Use fgets() instead.
For more information, see CWE‐242 (aka "Use of Inherently
Dangerous Function") at http://cwe.mitre.org/data/defini‐
tions/242.html
Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The minimum id allocation for system accounts shouldn't be 0 as this is
reserved for root.
Signed-off-by: Tomáš Mráz <tm@t8m.info>
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Report error if usermod asked for moving homedir and it does not exist.
Signed-off-by: Tomáš Mráz <tm@t8m.info>
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Introduced by c6c8130db4
After removing snprintf, the format string should get unescaped once.
Fixes#564
Reporter and patch author: DerMouse (github.com/DerMouse)
glibc, musl, FreeBSD, and OpenBSD define the MAX() and MIN()
macros in <sys/param.h> with the same definition that we use.
Let's not redefine it here and use the system one, as it's
effectively the same as we define (modulo whitespace).
See:
shadow (previously):
alx@asus5775:~/src/shadow/shadow$ grepc -ktm MAX
./lib/defines.h:318:#define MAX(x,y) (((x) > (y)) ? (x) : (y))
glibc:
alx@asus5775:~/src/gnu/glibc$ grepc -ktm -x 'sys/param.h$' MAX
./misc/sys/param.h:103:#define MAX(a,b) (((a)>(b))?(a):(b))
musl:
alx@asus5775:~/src/musl/musl$ grepc -ktm -x 'sys/param.h$' MAX
./include/sys/param.h:19:#define MAX(a,b) (((a)>(b))?(a):(b))
OpenBSD:
alx@asus5775:~/src/bsd/openbsd/src$ grepc -ktm -x 'sys/param.h$' MAX
./sys/sys/param.h:193:#define MAX(a,b) (((a)>(b))?(a):(b))
FreeBSD:
alx@asus5775:~/src/bsd/freebsd/freebsd-src$ grepc -ktm -x 'sys/param.h$' MAX
./sys/sys/param.h:333:#define MAX(a,b) (((a)>(b))?(a):(b))
Signed-off-by: Alejandro Colomar <alx@kernel.org>
free(3) accepts NULL, since the oldest ISO C. I guess the
paranoid code was taking care of prehistoric implementations of
free(3). I've never known of an implementation that doesn't
conform to this, so let's simplify this.
Remove xfree(3), which was effectively an equivalent of free(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This tweaks the database locking logic so that failures in the
link-checking paths are more detailed.
The rationale for this is that I've experienced a non-deterministic
bug which seems to be coming from this logic, and I'd like to get
more details about the actual failing condition.
The setuid, setgid, and sticky bits are not copied during copy_tree.
Also start with very restrictive permissions before setting ownerships.
This prevents situations in which users in a group with less permissions
than others could win a race in opening the file before permissions are
removed again.
Proof of concept:
$ echo $HOME
/home/uwu
$ install -o uwu -g fandom -m 604 /dev/null /home/uwu/owo
$ ls -l /home/uwu/owo
-rw----r-- 1 uwu fandom 0 Sep 4 00:00 /home/uwu/owo
If /tmp is on another filesystem, then "usermod -md /tmp/uwu uwu" leads
to this temporary situation:
$ ls -l /tmp/uwu/owo
-rw----r-- 1 root root 0 Sep 4 00:00 /tmp/uwu/owo
This means that between openat and chownat_if_needed a user of group
fandom could open /tmp/uwu/owo and read the content when it is finally
written into the file.
Fixes regression introduced in faeab50e71.
If a directory contains fifos, then openat blocks until the other side
of the fifo is connected as well.
This means that users can prevent "usermod -m" from completing if their
home directories contain at least one fifo.
The groupadd from shadow does not allow upper case group names, the
same is true for the upstream shadow. But distributions like
Debian/Ubuntu/CentOS has their own way to cope with this problem,
this patch is picked up from Fedora [1] to relax the usernames
restrictions to allow the upper case group names, and the relaxation is
POSIX compliant because POSIX indicate that usernames are composed of
characters from the portable filename character set [A-Za-z0-9._-].
[1] https://src.fedoraproject.org/rpms/shadow-utils/blob/rawhide/f/shadow-4.8-goodname.patch
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
useradd does not create the files if they don't exist, but if they exist
it will reset user data even if the data did not exist before creating
a hole and an explicitly zero'd data point resulting (especially for
high UIDs) in a lot of zeros ending up in containers and tarballs.
As rbalint points out, this was an exported fn. It also is
the only way for a libsubid user to do what it does, so let's
not drop it.
This reverts commit 477c8e6f42.
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Introduce a path_info struct with the full path and dirfd and name
information for *at() functions, since the full path is needed for link
resolution, SELinux label lookup and ACL attributes.
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Allow the compiler to verify the format string against the supplied
arguments.
chage.c:239:51: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
239 | (void) strftime (buf, sizeof buf, format, tp);
| ^~~~~~
salt.c:102:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
102 | static /*@observer@*/const unsigned long SHA_get_salt_rounds (/*@null@*/int *prefered_rounds);
| ^~~~~
salt.c:110:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
110 | static /*@observer@*/const unsigned long YESCRYPT_get_salt_cost (/*@null@*/int *prefered_cost);
| ^~~~~
subordinateio.c:160:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
160 | static const bool range_exists(struct commonio_db *db, const char *owner)
| ^~~~~
Compilers are free to ignore the indented hint and modern optimizations
should create good code by themself.
(As such it is for example deprecated in C++17.)
Version 1.19.1 was released in June 2014.
configure.ac:697: warning: AM_PROG_MKDIR_P: this macro is deprecated, and will soon be removed.
configure.ac:697: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead,
configure.ac:697: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:780: AM_PROG_MKDIR_P is expanded from...
m4/po.m4:23: AM_PO_SUBDIRS is expanded from...
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:697: the top level
configure.ac:697: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:697: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/gettext.m4:365: gt_INTL_MACOSX is expanded from...
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:697: the top level
configure.ac:697: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:697: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:697: the top level
configure.ac:697: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:697: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/iconv.m4:20: AM_ICONV_LINK is expanded from...
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:697: the top level
See https://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
configure.ac:25: warning: The macro `AM_ENABLE_STATIC' is obsolete.
configure.ac:25: You should run autoupdate.
m4/ltoptions.m4:259: AM_ENABLE_STATIC is expanded from...
configure.ac:25: the top level
configure.ac:26: warning: The macro `AM_ENABLE_SHARED' is obsolete.
configure.ac:26: You should run autoupdate.
m4/ltoptions.m4:205: AM_ENABLE_SHARED is expanded from...
configure.ac:26: the top level
It was hard to extend the option specification string passed to
getopt_long as the third argument.
The origian code had a branch with WITH_SELINUX ifdef condition. If
one wants to add one more option char with another ifdef condition
like ENABLE_SUBIDS to the spec, the one must enumerate the specs for
all combinations of the conditions:
* WITH_SELINUX && ENABLE_SUBIDS
* WITH_SELINUX && !ENABLE_SUBIDS
* !WITH_SELINUX && ENABLE_SUBIDS
* !WITH_SELINUX && !ENABLE_SUBIDS
With this change, you can append an option char to the spec.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
On systems with Linux kernel < 3.17, getentropy() and getrandom() may
exist but return ENOSYS. Use /dev/urandom as a fallback to avoid a hard
requirement on Linux kernel version.
Fixes#512.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
In order to remove some of the FIXMEs it was necessary to change the
code and call getulong() instead of getlong().
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
No need to redeclare a variable with the same name and type. Just keep
the one with the biggest scope.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
"egrep" is an obsolete alias for grep -E and newer greps will warn on usage
of egrep, so let's just swap it out.
Signed-off-by: Sam James <sam@gentoo.org>
Git wants to ensure that you do not read .git owned by other users.
But we fetch+build as 'build' user, and run tests as root user. Those
tests calculate git topdir using git rev-parse --show-toplevel, which
git now fails.
Setting safe.directory, seems wrong. Let's just use bash to figure
out the top dir.
Generating salt value depends on /dev/urandom. But after the
function process_root_flag changed the root directory, It does
not exist.
So, generate salt value before changeing the directory.
Fixes: #514
The markdown output for the maintainers, authors and contributors list
was wrapped in a single line and it was difficult to read. I've created
an unordered list to get a better output. On top of that I've also added
myself as a maintainer.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
This used to be 16 for historical reasons but these days basically every
distro configures --with-group-name-max-length=32 to make it match the
max Linux username length, make it default.
Signed-off-by: Jami Kettunen <jami.kettunen@protonmail.com>
C++ requires extern "C" linkage specification to call functions from a C
library. Enclose the function definitions in subid.h in an extern "C"
block if compiling in C++ mode to achieve this.
Signed-off-by: Alois Wohlschlager <alois1@gmx-topmail.de>
useradd warns that a system user ID less than SYS_UID_MIN is outside the
expected range, even though that ID has been specifically selected with
the "-u" option.
In my opinion all the user ID's below SYS_UID_MAX are for the system,
thus I change the condition to take that into account.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004911
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
If /etc/nsswitch.conf doesn't exist podman crashes because shadow_logfd
is NULL. In order to avoid that load the log file descriptor with the
log_get_logfd() helper function.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2038811
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
C89 and POSIX.1-2001 define signal(2) as returning a pointer to a
function returning 'void'. K&R C signal(2) signature is obsolete.
Use 'void' directly.
Also, instead of writing the function pointer type explicitly, use
POSIX's 'sighandler_t'.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Systems on which <sys/time.h> conflicted with <time.h> are obsolete.
This macro has been marked as obsolete by autoconf documentation.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
All current compilers support C89's 'const' keyword.
Autoconf declares this macro as obsolescent.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
As autoconf documentation says, this macro is obsolescent, as no
current systems have the bug in S_ISDIR, S_ISREG, etc..
The affected systems were Tektronix UTekV, Amdahl UTS, and
Motorola System V/88.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
INTERACTIVE Systems Corporation Unix is no longer sold, and Sun
said (long ago) that it would drop support for it on 2006-07-23.
So this macro has been obsolete for more than a decade.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'mode_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See mode_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'pid_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See pid_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'off_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See off_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'uid_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See uid_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_RUSEROK is not being used anywhere.
As the Linux manual page says, ruserok(3) is present on the BDSs, Solaris, and many other systems. This function appeared in 4.2BSD. So we probably can rely on its existence.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETADDRINFO is not being used anywhere.
BTW, the function is defined by POSIX.1-2001 and RFC 2553, so it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_SIGACTION is not being used anywhere.
BTW, the function is defined by SVr4 and POSIX.1-2001, so it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETTIMEOFDAY is not being used anywhere.
BTW, the function is defined by SVr4, 4.3BSD, and POSIX.1-2001, so
it's likely that it is always available.
POSIX.1-2008 marks it as obsolete, but only because
clock_gettime(2) provides more precission. Since gettimeofday(3)
is in use by many big projects, and it has no obvious dangers,
it's likely that it will continue to exist even if it's outside of
the POSIX standard.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETHOSTNAME is not being used anywhere.
BTW, the function is defined by SVr4, 4.4BSD, and POSIX.1-2001, so
it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The only place where the check was used was removed in 4e1afcd66.
BTW, it was unnecessary, since strchr(3) is defined by:
POSIX.1-2001, C89, SVr4, and 4.3BSD. Enough to rely on it.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
GNU autoconf documentation marks this macro as obsolescent, as
current systems are compatible with POSIX.
Simplify code to unconditionally include <sys/wait.h>, and don't
redefine WIFEXITSTATUS() and WIFEXITED(), since they are mandated
by POSIX.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
POSIX.1-2001 defines 'struct dirent' in <dirent.h>. It replaces
the old 'struct direct' found in BSDs. All of the systems that I
checked (including FreeBSD, NetBSD, and OpenBSD), now provide
<dirent.h> with 'struct dirent', as mandated by POSIX.
Since autoconf first checks <dirent.h> and only if it's missing it
checks other header files, it's clear that it will always find
<dirent.h>, so let's simplify.
GNU autoconf documentation declares this macro as obsolescent, and
acknowledges that all current systems with directory libraries
have <dirent.h>:
<https://www.gnu.org/software/autoconf/manual/autoconf-2.70/html_node/Particular-Headers.html>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Compilers are allowed to and do optimize memset(3) calls away for
pointers not accessed in the future. Since the memzero wrappers purpose
is exactly to unconditionally override memory (e.g. for stored
passwords) do not implement via regular memset(3), but via either
memset_s(3), explicit_bzero(3) or a hand written implementation using
volatile pointers.
See https://wiki.sei.cmu.edu/confluence/display/c/MSC06-C.+Beware+of+compiler+optimizations
run_part() and run_parts() do not modify their directory, name and
action arguments.
Also include the header in the implementation to provide the prototypes.
useradd.c:2495:59: warning: cast discards ‘const’ qualifier from pointer target type [-Wcast-qual]
2495 | if (run_parts ("/etc/shadow-maint/useradd-pre.d", (char*)user_name,
| ^
useradd.c:2495:24: warning: passing argument 1 of ‘run_parts’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
2495 | if (run_parts ("/etc/shadow-maint/useradd-pre.d", (char*)user_name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from useradd.c:45:
../lib/run_part.h:2:22: note: expected ‘char *’ but argument is of type ‘const char *’
2 | int run_parts (char *directory, char *name, char *action);
| ~~~~~~^~~~~~~~~
useradd.c:2496:25: warning: passing argument 3 of ‘run_parts’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
2496 | "useradd")) {
| ^~~~~~~~~
nss_init() does not modify its path argument, thus declare it const.
Also drop superfluous prototype.
nss.c:54:31: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
54 | nsswitch_path = NSSWITCH;
| ^
Function declarations with no argument declare functions taking an
arbitrary number of arguments. Use the special type void to declare
functions taking no argument.
C89 defined isdigit as a function that tests for any decimal-digit
character, defining the decimal digits as 0 1 2 3 4 5 6 7 8 9.
I don't own a copy of C89 to check, but check in C17:
7.4.1.5
5.2.1
More specifically:
> In both the source and execution basic character sets, the value
> of each character after 0 in the above list of decimal digits
> shall be one greater than the value of the previous.
And since in ascii(7), the character after '9' is ':', it's highly
unlikely that any implementation will ever accept any
_decimal digit_ other than 0..9.
POSIX simply defers to the ISO C standard.
This is exactly what we wanted from ISDIGIT(c), so just use it.
Non-standard implementations might have been slower or considered
other characters as digits in the past, but let's assume
implementations available today conform to ISO C89.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
It wasn't being used at all. Let's remove it.
Use isdigit(3) directly in comments that referenced it.
Also, in those comments, remove an outdated reference to the fact
that ISDIGIT_LOCALE(c) might evaluate its argument more than once,
which could be true a few commits ago, until
IN_CTYPE_DEFINITION(c) was removed. Previously, the definition
for ISDIGIT_LOCALE(c) was:
#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
# define IN_CTYPE_DOMAIN(c) 1
#else
# define IN_CTYPE_DOMAIN(c) isascii(c)
#endif
#define ISDIGIT_LOCALE(c) (IN_CTYPE_DOMAIN (c) && isdigit (c))
Which could evaluate 'c' twice on pre-C89 systems (which I hope
don't exist nowadays).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Due to the recent removal of IN_CTYPE_DOMAIN(), the uppercase
macros that wrapped these standard calls are now defined to be
equivalent. Therefore, there's no need for the wrappers, and it
is much more readable to use the standard calls directly.
However, hold on with ISDIGIT*(), since it's not so obvious what
to do with it.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The recent removal of STDC_HEADERS made IN_CTYPE_DOMAIN be defined
to 1 unconditionally. Remove the now unnecessary definition, and
propagate its truthness to expressions where it was used.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
We're in 2021. C89 is everywhere; in fact, there are many other
assumptions in the code that wouldn't probably hold on
pre-standard C environments. Let's simplify and assume that C89
is available.
The specific assumptions are that:
- <string.h>, and <stdlib.h> are available
- strchr(3), strrchr(3), and strtok(3) are available
- isalpha(3), isspace(3), isdigit(3), and isupper(3) are available
I think we can safely assume we have all of those.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
memset(3) has been in standard C since C89. It is also in
POSIX.1-2001, in SVr4, and in 4.3BSD (see memset(3) and memset(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
memcpy(3) has been in standard C since C89. It is also in
POSIX.1-2001, in SVr4, and in 4.3BSD (see memcpy(3) and memcpy(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
getgroups(2) has been in POSIX since POSIX.1-2001. It is also in
in SVr4 and in 4.3BSD (see getgroups(2) and getgroups(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
strftime(3) has been in standard C since C89. It is also in
POSIX.1-2001, and in SVr4 (see strftime(3) and strftime(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
sleep 2s before running newxidmap - it seems we were sometimes
racing, causing newxidmap to fail.
Make sure to remove /tmp/test-xidmap, for some reason they
were sometimes still there, causing test to fail.
Fix some irregular tabbing.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
PARAMETERS:
According to the C2x charter, I reordered the parameters 'size'
and 'buf' from previously existing date_to_str() definitions.
C2x charter:
> 15. Application Programming Interfaces (APIs) should be
> self-documenting when possible. In particular, the order of
> parameters in function declarations should be arranged such that
> the size of an array appears before the array. The purpose is to
> allow Variable-Length Array (VLA) notation to be used. This not
> only makes the code's purpose clearer to human readers, but also
> makes static analysis easier. Any new APIs added to the Standard
> should take this into consideration.
I used 'long' for the date parameter, as some uses of the function
need to pass a negative value meaning "never".
FUNCTION BODY:
I didn't check '#ifdef HAVE_STRFTIME', which old definitions did,
since strftime(3) is guaranteed by the C89 standard, and all of
the conversion specifiers that we use are also specified by that
standard, so we don't need any extensions at all.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The build was failing with duplicate symbol errors with -fno-common.
This is the default in GCC 10 and later, and explicitly enabled in some
distributions to catch problems like this. There were two causes:
- Prog and shadow_logfd were defined in a header file that was included
in multiple other files. Fix this by defining them once in
shadowlog.c, and having extern declarations in the header.
- Most of the tools (except id/nologin) also define a Prog variable,
which is not intended to alias the one in the library. Fix
this by renaming Prog in the library to shadow_progname, which also
matches the new accessor functions for it.
We were overriding this when --enable-shared was passed. We can actually
just dump the conditional logic as libtool will do the right thing for
us here anyway.
Without this patch, libsubid is installed as .0.
Signed-off-by: Sam James <sam@gentoo.org>
The SIGCHLD handler could have been ignored by parent process.
Make sure that we have default handling activated.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
This conforms to PAM documentation and it is needed to support
ambient capabilities with PAM + libcap-2.58+.
Signed-off-by: Björn Fischer <bf@CeBiTec.Uni-Bielefeld.DE>
Rename libsubid symbols to all be prefixed with subid_.
Don't export anything but the subid_*.
Closes#443
Signed-off-by: Serge Hallyn <serge@hallyn.com>
* Change to markdown format
* Include an introduction
* Remove the commit mailing list from the contacts
* Add the IRC channel to the contacts
* Move 'S/Key' section to doc/README.skey
* Move authors and maintainers to AUTHORS.md
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Add an additional NULL check condition in spw_free() and pw_free() to
avoid freeing an already empty pointer.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Rename list_subid_ranges to getsubids to provide a system binary to
check the sub*ids of a user. The intention is to provide this binary
with any distribution that includes the subid feature, so that system
administrators can check the subid ranges of a given user.
Finally, add a man page to explain the behaviour of getsubids.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980780
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Always set SIGCHLD handler to default, even if the caller of vipw has
set SIGCHLD to ignore. If SIGCHLD is ignored no zombie processes would
be created, which in turn could mean that kill is called with an already
recycled pid.
Proof of Concept:
1. Compile nochld:
--
#include <signal.h>
#include <unistd.h>
int main(void) {
char *argv[] = { "vipw", NULL };
signal(SIGCHLD, SIG_IGN);
execvp("vipw", argv);
return 1;
}
--
2. Run nochld
3. Suspend child vi, which suspends vipw too:
`kill -STOP childpid`
4. Kill vi:
`kill -9 childpid`
5. You can see with ps that childpid is no zombie but disappeared
6. Bring vipw back into foreground
`fg`
The kill call sends SIGCONT to "childpid" which in turn could have been
already recycled for another process.
This is definitely not a vulnerability. It would take super user
operations, at which point an attacker would have already elevated
permissions.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Change SELinux labels for files copied from the skeleton directory to
the home directory.
This could cause gnome's graphical user adding to fail without copying
the full skeleton files.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2022658
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
When using groupdel with a prefix, groupdel will attempt to read a
passwd file to look for any user in the group. When the file does not
exist it cores with segmentation fault.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986111
If a line in hushlogins file, e.g. /etc/hushlogins, starts with
'\0', then current code performs an out of boundary write.
If the line lacks a newline at the end, then another character is
overridden.
With strcspn both cases are solved.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
During shadowtcb_move() the directory is temporarily changed to be
owned by root:root with permissions 0700. After the change is done,
the ownership and permissions were supposed to be restored. The
call for chown() was there, but the chmod() call was missing. This
resulted in the broken TCB functionality. The added chmod() fixes
the issue.
Close the selabel handle to update the file_context. This means that the
file_context will be remmaped and used by selabel_lookup() to return
the appropriate context to label the home folder.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1993081
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Create the home and mail folders after the SELinux user has been set for
the added user. This will allow the folders to be created with the
SELinux user label.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
The buggy code was introduced nearly 5 years ago at the
commit 08fd4b69e8. The
desired behavior is that SIGKILL will be sent to the
child if it does not exit within 2 seconds after it
receives SIGTERM. However, SIGALRM is masked while
waiting for the child so it cannot wake the program
up after 2 seconds to send SIGKILL.
An example shows the buggy behavior, which exists in
Ubuntu 18.04 LTS (with login 1:4.5-1ubuntu2).
```bash
user1@localhost:~$ su user2 -c '
_term() {
echo SIGTERM received
}
trap _term TERM
while true; do
sleep 1
echo still alive
done'
Password:
still alive
Session terminated, terminating shell...Terminated
SIGTERM received
still alive
still alive
still alive
still alive
```
(SIGTERM is sent in another user1's terminal by
executing `killall su`.)
Here is the desired behavior, which shows what the
commit fixes.
```bash
user1@localhost:~$ su user2 -c '
_term() {
echo SIGTERM received
}
trap _term TERM
while true; do
sleep 1
echo still alive
done'
Password:
still alive
Session terminated, terminating shell...Terminated
SIGTERM received
still alive
still alive
...killed.
user1@localhost:~$ echo $?
255
```
In some circumstances I want the default behaviour of useradd to
not add user entries to the lastlog and faillog databases. Allowing
this options behaviour to be controlled by the config file
/etc/default/useradd.
`sgent` is only initialized in `get_group()` if `is_shadowgrp` is true.
So we should also only attempt to free it if this is actually the case.
Can otherwise lead to:
```
free() double free detected in tcache 2 (gpasswd)
```
The GitHub and Debian permanently moved to HTTPS URLs and redirect
there. The Gentoo URL does not redirect to HTTPS, but still use it to
address certain kinds of attacks. Lastly, the NetBSD URL is only
available using HTTP.
subuid_count won't get used by usr_update(), but since we're passing it
as an argument we have to make sure it's always defined. So just define
it as pre-set to 0.
Closes#402
Signed-off-by: Serge Hallyn <serge@hallyn.com>
xml2po is deprecated. We've previously replaced xml2po with
itstool in man/generate_translations.mak, but there was still
an instance of it that only is exercised for 'make dist'.
Update that one. Now 'make dist' succeeds on a ubuntu focal
or newer host where xml2po is not available.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
If SHA_CRYPT_MIN_ROUNDS and SHA_CRYPT_MAX_ROUNDS are both unspecified,
use SHA_ROUNDS_DEFAULT.
Previously, the code fell through, calling shadow_random(-1, -1). This
ultimately set rounds = (unsigned long) -1, which ends up being a very
large number! This then got capped to SHA_ROUNDS_MAX later in the
function.
The new behavior matches BCRYPT_get_salt_rounds().
Bug: https://bugs.gentoo.org/808195
Fixes: https://github.com/shadow-maint/shadow/issues/393
useradd generates an empty subid range when adding a new user. This is
caused because there are two variables, one local and the other one
global, that have a very similar name and they are used indistinctly in
the code. The local variable loads the SUB_*ID_COUNT configuration from
the login.defs file, while the global variable, which holds a value of
0, is used to generate the subid range. Causing the empty subid range
problem.
I've merged the two variables in the local one and removed the global
variable. I prefer to do it this way to reduce the scope of it but I'm
open to doing it the other way round.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1990653
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
When the -S and -a options are used for passwd to list the status
of all passwords, there is a chance the pw_passwd field of struct
passwd will be NULL. This can be due to 'files compat' being set
for passwd in /etc/nsswitch.conf and the usage of some features
not available in the 'files' mode (e.g. a plus sign at the start
of a line).
Example:
germ161:~ # grep passwd /etc/nsswitch.conf
passwd: files compat
germ161:~ # rpm -qa shadow
shadow-4.2.1-34.20.x86_64
germ161:~ # grep passwd /etc/nsswitch.conf
passwd: files compat
germ161:~ # grep + /etc/passwd
+@nisgroup
germ161:~ # passwd -S -a > /dev/null
Segmentation fault (core dumped)
With this commit:
germ161:~ # passwd -S -a > /dev/null
passwd: malformed password data obtained for user +@nisgroup
The only way of removing a group from the supplementary list is to use
-G option, and list all groups that the user is a member of except for
the one that wants to be removed. The problem lies when there's a user
that contains both local and remote groups, and the group to be removed
is a local one. As we need to include the remote group with -G option
the command will fail.
This reverts commit 140510de9d. This way,
it would be possible to remove the remote groups from the supplementary
list.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1967641
Resolves: https://github.com/shadow-maint/shadow/issues/338
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
new*idmap has a dependency with libeconf since commit
c464ec5570. I'm just adding it to the
Makefile to be able to compile in distributions that include libeconf.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Since bbf4b79, we stopped shipping /etc/default/useradd, and therefore
install of shadow does not auto-create /etc/default. So when useradd
tries to save a new default, it needs to create the directory.
Closes#390.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
libsubid's Makefile.am was always setting enable-shared in its LDFLAGS.
Do that only if not building static.
Closes#387
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
There's a better way to do this, and I hope to clean that up,
but this fixes out of tree builds for me right now.
Closes#386
Signed-off-by: Serge Hallyn <serge@hallyn.com>
In 9eb191edc4 I included a free() that
frees the members variable, which in turn causes the comma_to_list()
function to return an array of empty elements. The array variable holds
a list of pointers that point to offsets of the members variable. When
the function succeeds freeing members variable causes the elements of
the array variable to point to an empty string.
This is causing several regressions in our internal testing environment.
So, I'm reverting the change.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Most Linux distributions, including Fedora and RHEL 8, are shipping
with libxcrypt >= 4.0.
Since that version of libxcrypt the provided family of crypt_gensalt()
functions are able to use automatic entropy drawn from secure system
ressources, like arc4random(), getentropy() or getrandom().
Anyways, the settings generated by crypt_gensalt() are always
guaranteed to works with the crypt() function.
Using crypt_gensalt() is also needed to make proper use of newer
hashing methods, like yescrypt, provided by libxcrypt.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
The functions crypt(3), crypt_gensalt(3), and their
feature test macros may be defined in there.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
In a previous commit we introduced /dev/urandom as a source to obtain
random bytes from. This may not be available on all systems, or when
operating inside of a chroot.
Almost all systems provide functions to obtain random bytes from
secure system ressources. Thus we should prefer to use these, and
fall back to /dev/urandom, if there is no such function present, as
a last resort.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
Error: RESOURCE_LEAK (CWE-772): [#def1]
shadow-4.8.1/lib/commonio.c:320: alloc_fn: Storage is returned from allocation function "fopen_set_perms".
shadow-4.8.1/lib/commonio.c:320: var_assign: Assigning: "bkfp" = storage returned from "fopen_set_perms(backup, "w", &sb)".
shadow-4.8.1/lib/commonio.c:329: noescape: Resource "bkfp" is not freed or pointed-to in "putc".
shadow-4.8.1/lib/commonio.c:334: noescape: Resource "bkfp" is not freed or pointed-to in "fflush".
shadow-4.8.1/lib/commonio.c:339: noescape: Resource "bkfp" is not freed or pointed-to in "fileno".
shadow-4.8.1/lib/commonio.c:342: leaked_storage: Variable "bkfp" going out of scope leaks the storage it points to.
340| || (fclose (bkfp) != 0)) {
341| /* FIXME: unlink the backup file? */
342|-> return -1;
343| }
344|
Error: RESOURCE_LEAK (CWE-772): [#def2]
shadow-4.8.1/libmisc/addgrps.c:69: alloc_fn: Storage is returned from allocation function "malloc".
shadow-4.8.1/libmisc/addgrps.c:69: var_assign: Assigning: "grouplist" = storage returned from "malloc(i * 4UL)".
shadow-4.8.1/libmisc/addgrps.c:73: noescape: Resource "grouplist" is not freed or pointed-to in "getgroups". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/libmisc/addgrps.c:126: leaked_storage: Variable "grouplist" going out of scope leaks the storage it points to.
124| }
125|
126|-> return 0;
127| }
128| #else /* HAVE_SETGROUPS && !USE_PAM */
Error: RESOURCE_LEAK (CWE-772): [#def3]
shadow-4.8.1/libmisc/chowntty.c:62: alloc_fn: Storage is returned from allocation function "getgr_nam_gid".
shadow-4.8.1/libmisc/chowntty.c:62: var_assign: Assigning: "grent" = storage returned from "getgr_nam_gid(getdef_str("TTYGROUP"))".
shadow-4.8.1/libmisc/chowntty.c:98: leaked_storage: Variable "grent" going out of scope leaks the storage it points to.
96| */
97| #endif
98|-> }
99|
Error: RESOURCE_LEAK (CWE-772): [#def4]
shadow-4.8.1/libmisc/copydir.c:742: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/libmisc/copydir.c:742: var_assign: Assigning: "ifd" = handle returned from "open(src, 0)".
shadow-4.8.1/libmisc/copydir.c:748: leaked_handle: Handle variable "ifd" going out of scope leaks the handle.
746| #ifdef WITH_SELINUX
747| if (set_selinux_file_context (dst, NULL) != 0) {
748|-> return -1;
749| }
750| #endif /* WITH_SELINUX */
Error: RESOURCE_LEAK (CWE-772): [#def5]
shadow-4.8.1/libmisc/copydir.c:751: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/libmisc/copydir.c:751: var_assign: Assigning: "ofd" = handle returned from "open(dst, 577, statp->st_mode & 0xfffU)".
shadow-4.8.1/libmisc/copydir.c:752: noescape: Resource "ofd" is not freed or pointed-to in "fchown_if_needed".
shadow-4.8.1/libmisc/copydir.c:775: leaked_handle: Handle variable "ofd" going out of scope leaks the handle.
773| ) {
774| (void) close (ifd);
775|-> return -1;
776| }
777|
Error: RESOURCE_LEAK (CWE-772): [#def7]
shadow-4.8.1/libmisc/idmapping.c:188: alloc_fn: Storage is returned from allocation function "xmalloc".
shadow-4.8.1/libmisc/idmapping.c:188: var_assign: Assigning: "buf" = storage returned from "xmalloc(bufsize)".
shadow-4.8.1/libmisc/idmapping.c:188: var_assign: Assigning: "pos" = "buf".
shadow-4.8.1/libmisc/idmapping.c:213: noescape: Resource "buf" is not freed or pointed-to in "write".
shadow-4.8.1/libmisc/idmapping.c:219: leaked_storage: Variable "pos" going out of scope leaks the storage it points to.
shadow-4.8.1/libmisc/idmapping.c:219: leaked_storage: Variable "buf" going out of scope leaks the storage it points to.
217| }
218| close(fd);
219|-> }
Error: RESOURCE_LEAK (CWE-772): [#def8]
shadow-4.8.1/libmisc/list.c:211: alloc_fn: Storage is returned from allocation function "xstrdup".
shadow-4.8.1/libmisc/list.c:211: var_assign: Assigning: "members" = storage returned from "xstrdup(comma)".
shadow-4.8.1/libmisc/list.c:217: var_assign: Assigning: "cp" = "members".
shadow-4.8.1/libmisc/list.c:218: noescape: Resource "cp" is not freed or pointed-to in "strchr".
shadow-4.8.1/libmisc/list.c:244: leaked_storage: Variable "cp" going out of scope leaks the storage it points to.
shadow-4.8.1/libmisc/list.c:244: leaked_storage: Variable "members" going out of scope leaks the storage it points to.
242| if ('\0' == *members) {
243| *array = (char *) 0;
244|-> return array;
245| }
246|
Error: RESOURCE_LEAK (CWE-772): [#def11]
shadow-4.8.1/libmisc/myname.c:61: alloc_fn: Storage is returned from allocation function "xgetpwnam".
shadow-4.8.1/libmisc/myname.c:61: var_assign: Assigning: "pw" = storage returned from "xgetpwnam(cp)".
shadow-4.8.1/libmisc/myname.c:67: leaked_storage: Variable "pw" going out of scope leaks the storage it points to.
65| }
66|
67|-> return xgetpwuid (ruid);
68| }
69|
Error: RESOURCE_LEAK (CWE-772): [#def12]
shadow-4.8.1/libmisc/user_busy.c:260: alloc_fn: Storage is returned from allocation function "opendir".
shadow-4.8.1/libmisc/user_busy.c:260: var_assign: Assigning: "task_dir" = storage returned from "opendir(task_path)".
shadow-4.8.1/libmisc/user_busy.c:262: noescape: Resource "task_dir" is not freed or pointed-to in "readdir".
shadow-4.8.1/libmisc/user_busy.c:278: leaked_storage: Variable "task_dir" going out of scope leaks the storage it points to.
276| _("%s: user %s is currently used by process %d\n"),
277| Prog, name, pid);
278|-> return 1;
279| }
280| }
Error: RESOURCE_LEAK (CWE-772): [#def20]
shadow-4.8.1/src/newgrp.c:162: alloc_fn: Storage is returned from allocation function "xgetspnam".
shadow-4.8.1/src/newgrp.c:162: var_assign: Assigning: "spwd" = storage returned from "xgetspnam(pwd->pw_name)".
shadow-4.8.1/src/newgrp.c:234: leaked_storage: Variable "spwd" going out of scope leaks the storage it points to.
232| }
233|
234|-> return;
235|
236| failure:
Error: RESOURCE_LEAK (CWE-772): [#def21]
shadow-4.8.1/src/passwd.c:530: alloc_fn: Storage is returned from allocation function "xstrdup".
shadow-4.8.1/src/passwd.c:530: var_assign: Assigning: "cp" = storage returned from "xstrdup(crypt_passwd)".
shadow-4.8.1/src/passwd.c:551: noescape: Resource "cp" is not freed or pointed-to in "strlen".
shadow-4.8.1/src/passwd.c:554: noescape: Resource "cp" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/src/passwd.c:555: overwrite_var: Overwriting "cp" in "cp = newpw" leaks the storage that "cp" points to.
553| strcpy (newpw, "!");
554| strcat (newpw, cp);
555|-> cp = newpw;
556| }
557| return cp;
Using the random() function to obtain pseudo-random bytes
for generating salt strings is considered to be dangerous.
See CWE-327.
We really should use a more reliable source for obtaining
pseudo-random bytes like /dev/urandom.
Fixes#376.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
In the previous commit we refactored the functions converting the
rounds number into a string for use with the crypt() function, to
not require any static buffer anymore.
Add some clarifying comments about how the minimum required buffer
length is computed inside of these functions.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
* Move all pre-processor defines to the top of the file.
* Unify the gensalt() function to be useable for all supported
hash methods.
* Drop the gensalt_{b,yes}crypt() functions in favor of the
previous change.
* Refactor the functions converting the rounds number into
a string for use with the crypt() function, to not require
any static buffer anymore.
* Clarify the comment about how crypt_make_salt() chooses the used
hash method from the settings in the login.defs file.
* Use memset() to fill static buffers with zero before using them.
* Use a fixed amount of 16 random base64-chars for the
sha{256,512}crypt hash methods, which is effectively still less
than the recommendation from NIST (>= 128 bits), but the maximum
those methods can effectively use (approx. 90 bits).
* Rename ROUNDS_{MIN,MAX} to SHA_ROUNDS_{MIN,MAX}.
* Bugfixes in the logic of setting rounds in BCRYPT_salt_rounds().
* Likewise for YESCRYPT_salt_cost().
* Fix formatting and white-space errors.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
The corresponding functions for the other hash methods all take
a pointer to an integer value as the only paramater, so this
particular function should do so as well.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
Error: RESOURCE_LEAK (CWE-772): [#def28]
shadow-4.8.1/src/useradd.c:1905: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/src/useradd.c:1905: var_assign: Assigning: "fd" = handle returned from "open("/var/log/faillog", 2)".
shadow-4.8.1/src/useradd.c:1906: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/useradd.c:1917: leaked_handle: Handle variable "fd" going out of scope leaks the handle.
1915| /* continue */
1916| }
1917|-> }
1918|
1919| static void lastlog_reset (uid_t uid)
Error: RESOURCE_LEAK (CWE-772): [#def29]
shadow-4.8.1/src/useradd.c:1938: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/src/useradd.c:1938: var_assign: Assigning: "fd" = handle returned from "open("/var/log/lastlog", 2)".
shadow-4.8.1/src/useradd.c:1939: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/useradd.c:1950: leaked_handle: Handle variable "fd" going out of scope leaks the handle.
1948| /* continue */
1949| }
1950|-> }
1951|
1952| static void tallylog_reset (const char *user_name)
Error: RESOURCE_LEAK (CWE-772): [#def30]
shadow-4.8.1/src/useradd.c:2109: alloc_fn: Storage is returned from allocation function "strdup".
shadow-4.8.1/src/useradd.c:2109: var_assign: Assigning: "bhome" = storage returned from "strdup(prefix_user_home)".
shadow-4.8.1/src/useradd.c:2131: noescape: Resource "bhome" is not freed or pointed-to in "strtok".
shadow-4.8.1/src/useradd.c:2207: leaked_storage: Variable "bhome" going out of scope leaks the storage it points to.
2205| }
2206| #endif
2207|-> }
2208| }
2209|
Following the discussion https://github.com/shadow-maint/shadow/pull/345
I have changed the documentation to clarify the behaviour of subid
delegation when any subid source except files is configured.
Error: RESOURCE_LEAK (CWE-772): [#def31]
shadow-4.8.1/src/usermod.c:813: alloc_fn: Storage is returned from allocation function "__gr_dup".
shadow-4.8.1/src/usermod.c:813: var_assign: Assigning: "ngrp" = storage returned from "__gr_dup(grp)".
shadow-4.8.1/src/usermod.c:892: leaked_storage: Variable "ngrp" going out of scope leaks the storage it points to.
890| }
891| }
892|-> }
893|
894| #ifdef SHADOWGRP
Error: RESOURCE_LEAK (CWE-772): [#def32]
shadow-4.8.1/src/usermod.c:933: alloc_fn: Storage is returned from allocation function "__sgr_dup".
shadow-4.8.1/src/usermod.c:933: var_assign: Assigning: "nsgrp" = storage returned from "__sgr_dup(sgrp)".
shadow-4.8.1/src/usermod.c:1031: leaked_storage: Variable "nsgrp" going out of scope leaks the storage it points to.
1029| }
1030| }
1031|-> }
1032| #endif /* SHADOWGRP */
1033|
Error: RESOURCE_LEAK (CWE-772): [#def34]
shadow-4.8.1/src/usermod.c:1161: alloc_fn: Storage is returned from allocation function "getgr_nam_gid".
shadow-4.8.1/src/usermod.c:1161: var_assign: Assigning: "grp" = storage returned from "getgr_nam_gid(optarg)".
shadow-4.8.1/src/usermod.c:1495: leaked_storage: Variable "grp" going out of scope leaks the storage it points to.
1493| }
1494| #endif /* ENABLE_SUBIDS */
1495|-> }
1496|
1497| /*
Error: RESOURCE_LEAK (CWE-772): [#def35]
shadow-4.8.1/src/usermod.c:1991: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/src/usermod.c:1991: var_assign: Assigning: "fd" = handle returned from "open("/var/log/lastlog", 2)".
shadow-4.8.1/src/usermod.c:2000: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/usermod.c:2000: noescape: Resource "fd" is not freed or pointed-to in "read". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/src/usermod.c:2003: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/usermod.c:2032: leaked_handle: Handle variable "fd" going out of scope leaks the handle.
2030| }
2031| }
2032|-> }
2033|
2034| /*
Error: RESOURCE_LEAK (CWE-772): [#def36]
shadow-4.8.1/src/usermod.c:2052: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/src/usermod.c:2052: var_assign: Assigning: "fd" = handle returned from "open("/var/log/faillog", 2)".
shadow-4.8.1/src/usermod.c:2061: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/usermod.c:2061: noescape: Resource "fd" is not freed or pointed-to in "read". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/src/usermod.c:2064: noescape: Resource "fd" is not freed or pointed-to in "lseek".
shadow-4.8.1/src/usermod.c:2092: leaked_handle: Handle variable "fd" going out of scope leaks the handle.
2090| }
2091| }
2092|-> }
2093|
2094| #ifndef NO_MOVE_MAILBOX
Clarify that the subid delegation can only come from one source.
Moreover, add an example of what might happen if the subid source is NSS
and useradd is executed.
Related: https://github.com/shadow-maint/shadow/issues/331
Closes#331
1. drop 'has_any_range' nss method as it is not useful
2. do not try to create a subid range in newusers when using nss for
subids, since that's not possible.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
(cherry picked from commit 88a434adbdcf4a8640793fd58bcd2ba77598349d)
Following alexey-tikhonov's suggestion.
Since we've dropped the 'owner' field in the data returned for
get_subid_ranges, we can just return a single allocated array of
simple structs. This means we can return a ** instead of ***, and
we can get rid of the subid_free_ranges() helper, since the caller
can just free() the returned data.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
The rest of the run isn't likely to get much better, is it?
Thanks to Alexey for pointing this out.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Cc: Alexey Tikhonov <atikhono@redhat.com>
Closes: 339
struct subordinate_range is pretty closely tied to the existing
subid code and /etc/subuid format, so it includes an owner. Dropping
that or even renaming it is more painful than I'd first thought.
So introduce a 'struct subid_range' which is only the start and
count, leaving 'struct subordinate_range' as the owner, start and
count.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Closes#325
Add a new subid_init() function which can be used to specify the
stream on which error messages should be printed. (If you want to
get fancy you can redirect that to memory :) If subid_init() is
not called, use stderr. If NULL is passed, then /dev/null will
be used.
This patch also fixes up the 'Prog', which previously had to be
defined by any program linking against libsubid. Now, by default
in libsubid it will show (subid). Once subid_init() is called,
it will use the first variable passed to subid_init().
Signed-off-by: Serge Hallyn <serge@hallyn.com>
When uid 0 maps host uid 0 into the child userns newer kernels require
CAP_SETFCAP be retained as this allows the caller to create fscaps that
are valid in the ancestor userns. This was a security issue (in very
rare circumstances). So whenever host uid 0 is mapped, retain
CAP_SETFCAP if the caller had it.
Userspace won't need to set CAP_SETFCAP on newuidmap as this is really
only a scenario that real root should be doing which always has
CAP_SETFCAP. And if they don't then they are in a locked-down userns.
(LXC sometimes maps host uid 0 during chown operations in a helper
userns but will not rely on newuidmap for that. But we don't want to
risk regressing callers that want to rely on this behavior.)
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Include the new HMAC_CRYPTO_ALGO key that is needed by pam_timestamp to
select the algorithm that is going to be used to calculate the message
authentication code.
pam_timestamp is currently using an embedded algorithm to calculate the
HMAC message, but the idea is to improve this behaviour by relying on
openssl's implementation. On top of that, the ability to change the
algorithm with a simple configuration change allows to simplify the
process of removing unsecure algorithms.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1947294
Once opened, keep the selabel database open for further lookups.
Register an exit handler to close the database.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
Search the SELinux selabel database for the file type to be created.
Not specifying the file mode can cause an incorrect file context to be
returned.
Also prepare contexts in commonio_close() for the generic database
filename, not with the backup suffix appended, to ensure the desired
file context after the final rename.
Closes: #322
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
matchpathcon(3) is deprecated in favor of selabel_lookup(3).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
Return 0 on setfscreatecon(3) failure, like set_selinux_file_context().
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
These retrieved contexts are just passed to libselinux functions and not
printed or otherwise made available to the outside, so a context
translation to human readable MCS/MLS labels is not needed.
(see man:setrans.conf(5))
The typedef security_context_t is deprecated, see
9eb9c93275
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
This retrieved context is just passed to libselinux functions and not
printed or otherwise made available to the outside, so a context
translation to human readable MCS/MLS labels is not needed.
(see man:setrans.conf(5))
The typedef security_context_t is deprecated, see
9eb9c93275
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
Currently, supplying a relative path via the --prefix flag to the
useradd command triggers a bug in the creation of home directories. The
code seems to unintentionally prepend a leading "/" to all paths,
quietly transforming a relative prefixed home path into an absolute
path. This can be seen in the following strace logs from running
"useradd --create-home --prefix tmp/root squat":
```
access("tmp/root//home/squat", F_OK) = -1 ENOENT (No such file or directory)
access("/mp", F_OK) = 0
access("/mp/root", F_OK) = 0
access("/mp/root/home", F_OK) = 0
access("/mp/root/home/squat", F_OK) = -1 ENOENT (No such file or directory)
mkdir("/mp/root/home/squat", 000) = 0
chown("/mp/root/home/squat", 0, 0) = 0
chmod("/mp/root/home/squat", 0755) = 0
chown("tmp/root//home/squat", 1000, 1000) = -1 ENOENT (No such file or directory)
chmod("tmp/root//home/squat", 0700) = -1 ENOENT (No such file or directory)
```
Note that the relative path is correctly probed in the beginning and it
is only during the recursive creation that the path is turned into an
absolute path. This invocation results in the creation of a "/mp"
hierarchy in the root of the filesystem.
Similar problems occur when using `--prefix ./tmp/root`.
This commit fixes the handling of relative paths by not assuming that
the given path is anchored with a "/".
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
Otherwise our su -p uses bash if that is what root was
configured to use, and then fails to read /root/ for
.bash_profile. This caused an unexpected error message
in /tmp/err, failing the test.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Closes#154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Issue #297 reported seeing
*** Warning: Linking the shared library libsubid.la against the
*** static library ../libmisc/libmisc.a is not portable!
which commit b5fb1b38ee was supposed
to fix. But a few commits later it's back. So try to fix it
in the way the bug reporter suggested. This broke builds some
other ways, namely a few missing library specifications, so add
those.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
* login & su: Treat an empty passwd field as invalid
Otherwise it's treated like the “require no password” clause while it probably
should be treated like a normal su that can't validate anyway.
A similar change should be done for USE_PAM.
* su & login: Introduce PREVENT_NO_AUTH
man/usermod.8.xml: specify what happens when the current home directory
doesn't exist if using -d and -m options. Moreover, specify what happens
when the group ownership is changed and the uid's don't match in -u and
-g options.
man/shadow.5.xml: indicate the exact time and timezone for the dates.
Moreover, clarify that when the password expires the user won't be able
to login.
man/chage.1.xml: Indicate that -d option with a value of 0 forces the
user to change his password. Besides, set an example on how to use -E
option. Finally, add a general note to clarify that chage only takes
charge of local users and another note to indicate that it doesn't check
inconsistencies between shadow and passwd files.
covscan issue:
Error: RESOURCE_LEAK (CWE-772): [#def39] [important]
src/useradd.c:728: alloc_fn: Storage is returned from allocation function "get_local_group".
src/useradd.c:728: var_assign: Assigning: "grp" = storage returned from "get_local_group(list)".
src/useradd.c:728: overwrite_var: Overwriting "grp" in "grp = get_local_group(list)" leaks the storage that "grp" points to.
726| * GID values, otherwise the string is looked up as is.
727| */
728|-> grp = get_local_group (list);
729|
730| /*
Existing help output advertises --force as a long opt.
-f, --force delete group even if it is the primary group of a user
But errors when the long opt is used.
groupdel: unrecognized option '--force'
Signed-off-by: Jamin W. Collins <jamin.collins@gmail.com>
The login.defs is shared between more upstream projects (util-linux,
etc.). We need to improve compatibility between the projects do not
report valid, but foreign items.
Addresses: https://github.com/shadow-maint/shadow/issues/276
Signed-off-by: Karel Zak <kzak@redhat.com>
Some of these tests seem wrong. The assume that
su -- -c command
should work, whereas -- should mean pass all remaining arguments
along to the command.
Add some new tests based on examples in Issue 253
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
It's now possible to run commands as other users without shell
interpolation by using "--exec":
Read /etc/shadow as root without specifying user:
```
su --exec /bin/cat -- /etc/shadow
```
Or specify user:
```
su --exec /bin/cat root -- /etc/shadow
```
Mechanical rename distinguishing this variable from intended changes
supporting executing commands without using an interpretive shell
(i.e. no '/bin/sh -c').
In preparation for supporting --exec I was testing the robustness
of "--" handling and it became apparent that things are currently
a bit broken in `su`.
Since "--" is currently of limited utility, as the subsequent
words are simply passed to the shell after "-c","command_string",
it seems to have gone unnoticed for ages.
However, with --exec, it's expected that "--" would be an almost
required separator with every such usage, considering the
following flags must be passed verbatim to execve() and will
likely begin with hyphens looking indistinguishable from any
other flags in lieu of shell interpolation to worry about.
For some practical context of the existing situation, this
invocation doesn't work today:
```
$ su --command ls -- flags for shell
No passwd entry for user 'flags'
$
```
This should just run ls as root with "flags","for","shell"
forwarded to the shell after "-c","ls".
The "--" should block "flags" from being treated as the user.
That particular issue isn't a getopt one per-se, it's arguably
just a bug in su.c's implementation.
It *seemed* like an easy fix for this would be to add a check if
argv[optind-1] were "--" before treating argv[optind] as USER.
But testing that fix revealed getopt was rearranging things when
encountering "--", the "--" would always separate the handled
opts from the unhandled ones. USER would become shifted to
*after* "--" even when it occurred before it!
If we change the command to specify the user, it works as-is:
```
$ su --command ls root -- flags for shell
Password:
testfile
$
```
But what's rather surprising is how that works; the argv winds up:
"su","--command","ls","--","root","flags","for","shell"
with optind pointing at "root".
That arrangement of argv is indistinguishable from omitting the
user and having "root","flags","for","shell" as the stuff after
"--".
This makes it non-trivial to fix the bug of omitting user
treating the first word after "--" as the user, which one could
argue is a potentially serious security bug if you omit the user,
expect the command to run as root, and the first word after "--"
is a valid user, and what follows that something valid and
potentially destructive not only running in unintended form but
as whatever user happened to be the first word after "--".
So, it seems like something important to fix, and getopt seems to
be getting in the way of fixing it properly without being more
trouble than replacing getopt.
In disbelief of what I was seeing getopt doing with argv here, I
took a glance at the getopt source and found the following:
```
/* The special ARGV-element '--' means premature end of options.
Skip it like a null option,
then exchange with previous non-options as if it were an option,
then skip everything else like a non-option. */
if (d->optind != argc && !strcmp (argv[d->optind], "--"))
```
I basically never use getopt personally because ages ago it
annoyed me with its terrible API for what little it brought to
the table, and this brings it to a whole new level of awful.
This is a stability fix, not a security fix, because the affected -o
option can only be used by root and it takes a modified passwd file.
If a gecos field for a user has BUFSIZ characters without commas and an
equals sign (i.e. a huge slop/extra field) and chfn is called with -o,
then a buffer overflow occurs.
It is not possible to trigger this with shadow tools. Therefore, the
passwd file must be modified manually.
I have fixed this unlikely case the easiest and cleanest way possible.
Since chfn bails out if more than 80 characters excluding commas are
supposed to be written into gecos field, we can stop processing early on
if -o argument is too long.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
This is merely a stability fix, not a security fix.
As the root user, it is possible to set time values which later on
result in signed integer overflows.
For this to work, an sgetspent implementation must be used which
supports long values (glibc on amd64 only parses 32 bit, not 64).
Either use musl or simply call configure with following environment
variable:
$ ac_cv_func_sgetspent=no ./configure
Also it is recommended to compile with -fsanitize=undefined or
-ftrapv to see these issues easily.
Examples to trigger issues when calling "chage -l user":
$ chage -d 9223372036854775807 user
$ chage -d 106751991167300 user
$ chage -M 9999 user
$ chage -d 90000000000000 user
$ chage -I 90000000000000 user
$ chage -M 9999 user
$ chage -E 9223372036854775807 user
While at it, I fixed casting issues which could lead to signed integer
overflows on systems which still have a 32 bit time_t.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Closes#154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Now that travis supports more architectures let's make sure we test on
all of them and that we enable Coverity too.
Signed-off-by: Christian Brauner <christian@brauner.io>
Do not include <sys/prctl.h> we don't have <sys/capability.h>, we don't
need prctl in that case anyway.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
According to crypt(5), MD5 and DES should not be used for new
hashes. Also the default number of SHA rounds chosen by libc is orders
of magnitude too low for modern hardware. Let's warn the users about
weak choices.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Explanation: clarify the useradd -d parameter as it does create directory HOME_DIR if it doesn't exit.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1677005
Changelog: [serge] minor tweak to the text
The useradd program should be consistent with userdel and usermod and use the
MAIL_SPOOL_DIR variable as the default spool, if it is defined. Otherwise,
don't create a new mailbox, because it won't be cleaned up by userdel when run
with the -r flag.
In case there is a regular user with a process running on a system
with uid falling into a namespaced uid range of another user.
The user with the colliding namespaced uid range will not be
allowed to be deleted without forcing the action with -f.
The user_busy() is adjusted to check whether the suspected process
is really a namespaced process in a different namespace.
updated Dutch translation for shadow version 4.8 (pot file from 2019-12-01).
I updated the translation for Debian
and on request of the Debian package maintainer Bálint Réczey I am creating this pull request
Although it is a good idea to check for an inadvertent typo
in the shell name it is possible that the shell might not be present
on the system yet when the user is added.
This option can be used to set a separate mode for useradd(8) and
newusers(8) to create the home directories with.
If this option is not set, the current behavior of using UMASK
or the default umask is preserved.
There are many distributions that set UMASK to 077 by default just
to create home directories not readable by others and use things like
/etc/profile, bashrc or sudo configuration files to set a less
restrictive
umask. This has always resulted in bug reports because it is hard
to follow as users tend to change files like bashrc and are not about
setting the umask to counteract the umask set in /etc/login.defs.
A recent change in sudo has also resulted in many bug reports about
this. sudo now tries to respect the umask set by pam modules and on
systems where pam does not set a umask, the login.defs UMASK value is
used.
This commit adds a from= field to the end of the useradd log entry.
Casting user_name to tallylog_reset to silence a compiler warning.
Changelog: Fixing tabs
Changelog: Changing function prototype to const char* to match user_name declaration.
This option can be used to set a separate mode for useradd(8) and
newusers(8) to create the home directories with.
If this option is not set, the current behavior of using UMASK
or the default umask is preserved.
There are many distributions that set UMASK to 077 by default just
to create home directories not readable by others and use things like
/etc/profile, bashrc or sudo configuration files to set a less
restrictive
umask. This has always resulted in bug reports because it is hard
to follow as users tend to change files like bashrc and are not about
setting the umask to counteract the umask set in /etc/login.defs.
A recent change in sudo has also resulted in many bug reports about
this. sudo now tries to respect the umask set by pam modules and on
systems where pam does not set a umask, the login.defs UMASK value is
used.
If SSH_ORIGINAL_COMMAND is set, it will be added to the syslog entry.
Closes#123.
Changelog: (SEH squashed commit): Fixing indentation
Changelog: (SEH) break up long line
`make` runs each line in a shell and bails out on error,
however, the shell is not started with `-e`, so commands in
`for` loops can fail without the error actually causing
`make` to bail out with a failure status.
For instance, the following make snippet will end
successfully, printing 'SUCCESS', despite the first `chmod`
failing:
all:
touch a b
for i in a-missing-file a b; do \
chmod 666 $$i; \
done
@echo SUCCESS
To prevent wrong paths in install scripts from remaining
unnoticed, let's activate `set -e` in the `for` loop
subshells.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Suggesting mode 2770 is dangerous because it makes the binary writeable
by all members of the owning group which is supposed to be normal
end-users. Suggest 2710 instead as is usual for s[ug]id binaries,
allowing execution but neither reading nor writing.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Here's a sad story:
* 70971457 is merged into shadow, allowing newgidmap/newuidmap to be
installed with file caps rather than setuid.
* https://bugs.archlinux.org/task/63248 is filed to take advantage of
this.
* The arch maintainer of the 'shadow' package notices that this doesn't
work, and submits a pull request to fix this in shadow.
* edf7547ad5 is merged, fixing the post install hooks.
The problem here is that distros have been building shadow with PAM for
O(years), but the install hooks have silently failed due to the
combination of the directory mismatch (suidubins vs suidsbins) and later
success with setuid'ing newgidmap/newuidmap.
With the install hooks fixed, those of us (Arch[1] and Gentoo[2] so far)
who never built shadow explicitly with --enable-account-tools-setuid are
now getting setuid account tools, and don't have PAM configuration
suitable for use with setuid account management tools.
It's entirely unclear to me why you'd want this, but I assume there's
some reason out there for it existing. Regardless, setuid binaries are
dangerous and shouldn't be enabled by default without good reason.
[1] https://bugs.archlinux.org/task/64836
[2] https://bugs.gentoo.org/702252
This reverts commit e293aa9cfc.
See https://github.com/shadow-maint/shadow/issues/196
Some distros still care about `/bin` vs `/usr/bin`. This commit makes
it so all binaries are always installed to `/bin`/`/sbin`. The only way to
restore the previous behaviour of installing some binaries to
`/usr/bin`/`/usr/sbin` is to revert the patch.
Synchronize how passwd(5) and shadow(5) describe the password field.
Reorder the descriptions more logically.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Closes#185
If vipw is suspended (e.g. via control-Z) and then resumed, it often gets
immediately suspended. This is easier to reproduce on a multi-core system.
root@buster:~# /usr/sbin/vipw
[1]+ Stopped /usr/sbin/vipw
root@buster:~# fg
/usr/sbin/vipw
[1]+ Stopped /usr/sbin/vipw
root@buster:~# fg
[vipw resumes on the second fg]
The problem is that vipw forks a child process and calls waitpid() with the
WUNTRACED flag. When the child process (running the editor) is suspended, the
parent sends itself SIGSTOP to suspend the main vipw process. However, because
the main vipw is in the same process group as the editor which received the ^Z,
the kernel already sent the main vipw SIGTSTP.
If the main vipw receives SIGTSTP before the child, it will be suspended and
then, once resumed, will proceed to suspend itself again.
To fix this, run the child process in its own process group as the foreground
process group. That way, control-Z will only affect the child process and the
parent can use the existing logic to suspend the parent.
Using hard-coded access vector ids is deprecated and can lead to issues with custom SELinux policies.
Switch to `selinux_check_access()`.
Also use the libselinux log callback and log if available to audit.
This makes it easier for users to catch SELinux denials.
Drop legacy shortcut logic for passwd, which avoided a SELinux check if uid 0 changes a password of a user which username equals the current SELinux user identifier.
Nowadays usernames rarely match SELinux user identifiers and the benefit of skipping a SELinux check is negligible.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
With this, it is possible for Linux distributors to store their
supplied default configuration files somewhere below /usr, while
/etc only contains the changes made by the user. The new option
--enable-vendordir defines where the shadow suite should additional
look for login.defs if this file is not in /etc.
libeconf is a key/value configuration file reading library, which
handles the split of configuration files in different locations
and merges them transparently for the application.
suidubins should be suidusbins, since these binaries are installed
${prefix}/sbin. This historically hasn't broken the build because
chmod of newgidmap/newuidmap succeeds, causing make to think the command
succeeded. Configuring shadow with --with-fcaps removes these final two
entries and exposes the chmod failure to make.
Some distros don't care about the split between /bin, /sbin, /usr/bin,
and /usr/sbin, so let them easily stuff binaries wherever they want.
This also fixes a problem during installation where-in a loop of 'chmod
4755' calls will mostly fail. However, because the last two succeed
(newuidmap/newgidmap), make considers the command to be a success.
Somewhat not-amusingly, configuring shadow with --with-fcaps will cause
installation to fail because the final chmod call is now a failing one.
Fix formatting of login.defs comments. Variables are preceeded by "#"
without space, comments are preceeded by "# ". It makes the file machine
parseable again.
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
A configure error occurs when /bin/sh -> dash:
checking for is_selinux_enabled in -lselinux... yes
checking for semanage_connect in -lsemanage... yes
configure: 16322: test: yesyes: unexpected operator
Use "=" instead of "==" since dash doesn't support this operator.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
new switch added to useradd command, --btrfs-subvolume-home. When
specified *and* the filesystem is detected as btrfs, it will create a
subvolume for user's home instead of a plain directory. This is done via
`btrfs subvolume` command. Specifying the new switch while trying to
create home on non-btrfs will result in an error.
userdel -r will handle and remove this subvolume transparently via
`btrfs subvolume` command. Previosuly this failed as you can't rmdir a
subvolume.
usermod, when moving user's home across devices, will detect if the home
is a subvolume and issue an error messages instead of copying it. Moving
user's home (as subvolume) on same btrfs works transparently.
As the lockfiles have PID in the name, there can be no conflict
in the name with other process, so there is no point in using
O_EXCL and it only can fail if there is a stale lockfile from
previous execution that crashed for some reason.
The implementation of prefix option dropped the use of lckpwdf().
However that is incorrect as other tools manipulating the shadow passwords
such as PAM use lckpwdf() and do not know anything about the
shadow's own locking mechanism.
This reverts the implementation to use lckpwdf() if prefix option
is not used.
From <https://github.com/shadow-maint/shadow/pull/71>:
```
The third field in the /etc/shadow file (sp_lstchg) contains the date of
the last password change expressed as the number of days since Jan 1, 1970.
As this is a relative time, creating a user today will result in:
username:17238:0:99999:7:::
whilst creating the same user tomorrow will result in:
username:17239:0:99999:7:::
This has an impact for the Reproducible Builds[0] project where we aim to
be independent of as many elements the build environment as possible,
including the current date.
This patch changes the behaviour to use the SOURCE_DATE_EPOCH[1]
environment variable (instead of Jan 1, 1970) if valid.
```
This updated PR adds some missing calls to gettime (). This was originally
filed by Johannes Schauer in Debian as #917773 [2].
[0] https://reproducible-builds.org/
[1] https://reproducible-builds.org/specs/source-date-epoch/
[2] https://bugs.debian.org/917773
- translated by Jean-Philippe MENGUAL
- proofread by the debian-l10n-french mailing list contributors
Signed-off-by: Alban VIDAL <alban.vidal@zordhak.fr>
In case the home directory is not a real home directory
(owned by the user) but things like / or /var or similar,
it is unsafe to change ownership of home directory content.
The test checks whether the home directory is owned by the
user him/herself, if not no ownership modification of contents
is performed.
As the large uids are usually provided by remote user identity and
authentication service, which also provide user login tracking,
there is no need to create a huge sparse file for them on every local
machine.
fixup! login.defs: Add LASTLOG_UID_MAX variable to limit lastlog to small uids.
simplify the condition for setting the euid of the process. Now it is
always set when we are running as root, the issue was introduced with
the commit 52c081b02c
Changelog: 2018-11-24 - seh - enforce that euid only gets set to ruid if
it currently == 0 (i.e. really was setuid-*root*).
Closes: https://github.com/genuinetools/img/issues/191
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
Commit 1ecca8439d ("new[ug]idmap: not require CAP_SYS_ADMIN in the parent userNS")
does contain a wrong commit message, is lacking an explanation of the
issue, misses some simplifications and hardening features. This commit
tries to rectify this.
In (crazy) environment where all capabilities are dropped from the
capability bounding set apart from CAP_SET{G,U}ID setuid- and
fscaps-based new{g,u}idmap binaries behave differently when writing
complex mappings for an unprivileged user:
1. newuidmap is setuid
unshare -U sleep infinity &
newuidmap $? 0 100000 65536
First file_ns_capable(file, ns, CAP_SYS_ADMIN) is hit. This calls into
cap_capable() and hits the loop
for (;;) {
/* Do we have the necessary capabilities? */
if (ns == cred->user_ns)
return cap_raised(cred->cap_effective, cap) ? 0 : -EPERM;
/*
* If we're already at a lower level than we're looking for,
* we're done searching.
*/
if (ns->level <= cred->user_ns->level)
return -EPERM;
/*
* The owner of the user namespace in the parent of the
* user namespace has all caps.
*/
if ((ns->parent == cred->user_ns) && uid_eq(ns->owner, cred->euid))
return 0;
/*
* If you have a capability in a parent user ns, then you have
* it over all children user namespaces as well.
*/
ns = ns->parent;
}
The first check fails and falls through to the end of the loop and
retrieves the parent user namespace and checks whether CAP_SYS_ADMIN is
available there which isn't.
2. newuidmap has CAP_SETUID as fscaps set
unshare -U sleep infinity &
newuidmap $? 0 100000 65536
The first file_ns_capable() check for CAP_SYS_ADMIN is passed since the
euid has not been changed:
if ((ns->parent == cred->user_ns) && uid_eq(ns->owner, cred->euid))
return 0;
Now new_idmap_permitted() is hit which calls ns_capable(ns->parent,
CAP_SET{G,U}ID). This check passes since CAP_SET{G,U}ID is available in
the parent user namespace.
Now file_ns_capable(file, ns->parent, CAP_SETUID) is hit and the
cap_capable() loop (see above) is entered again. This passes
if (ns == cred->user_ns)
return cap_raised(cred->cap_effective, cap) ? 0 : -EPERM;
since CAP_SET{G,U}ID is available in the parent user namespace. Now the
mapping can be written.
There is no need for this descrepancy between setuid and fscaps based
new{g,u}idmap binaries. The solution is to do a
seteuid() back to the unprivileged uid and PR_SET_KEEPCAPS to keep
CAP_SET{G,U}ID. The seteuid() will cause the
file_ns_capable(file, ns, CAP_SYS_ADMIN) check to pass and the
PR_SET_KEEPCAPS for CAP_SET{G,U}ID will cause the CAP_SET{G,U}ID to
pass.
Fixes: 1ecca8439d ("new[ug]idmap: not require CAP_SYS_ADMIN in the parent userNS")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
do not install newuidmap/newgidmap as suid binaries. Running these
tools with the same euid as the owner of the user namespace to
configure requires only CAP_SETUID and CAP_SETGID instead of requiring
CAP_SYS_ADMIN when it is installed as a suid binary.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the euid!=owner of the userns, the kernel returns EPERM when trying
to write the uidmap and there is no CAP_SYS_ADMIN in the parent
namespace.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Some distributions, notably Fedora, have the following order of nsswitch
modules by default:
passwd: sss files
group: sss files
The advantage of serving local users through SSSD is that the nss_sss
module has a fast mmapped-cache that speeds up NSS lookups compared to
accessing the disk an opening the files on each NSS request.
Traditionally, this has been done with the help of nscd, but using nscd
in parallel with sssd is cumbersome, as both SSSD and nscd use their own
independent caching, so using nscd in setups where sssd is also serving
users from some remote domain (LDAP, AD, ...) can result in a bit of
unpredictability.
More details about why Fedora chose to use sss before files can be found
on e.g.:
https://fedoraproject.org//wiki/Changes/SSSDCacheForLocalUsers
or:
https://docs.pagure.org/SSSD.sssd/design_pages/files_provider.html
Now, even though sssd watches the passwd and group files with the help
of inotify, there can still be a small window where someone requests a
user or a group, finds that it doesn't exist, adds the entry and checks
again. Without some support in shadow-utils that would explicitly drop
the sssd caches, the inotify watch can fire a little late, so a
combination of commands like this:
getent passwd user || useradd user; getent passwd user
can result in the second getent passwd not finding the newly added user
as the racy behaviour might still return the cached negative hit from
the first getent passwd.
This patch more or less copies the already existing support that
shadow-utils had for dropping nscd caches, except using the "sss_cache"
tool that sssd ships.
Sometimes getlogin() may fail, e.g., in a chroot() environment or due to NSS
misconfiguration. Loggin UID allows for investigation and troubleshooting in
such situation.
When "su -l" is used the behaviour is described as similar to
a direct login. However login.c is doing a setup_env(pw) and then a
pam_getenvlist() in this scenario. But su.c is doing it the other
way around. Which means that the value of PATH from /etc/environment
is overriden. I think this is a bug because:
The man-page claims that "-l": "provides an environment similar
to what the user would expect had the user logged in directly."
And login.c is using the PATH from /etc/environment.
This will fix:
https://bugs.launchpad.net/ubuntu/+source/shadow/+bug/984390
This allows shadow-utils to build on systems like Adélie, which have no
<utmp.h> header or `struct utmp`. We use a <utmpx.h>-based daemon,
utmps[1], which uses `struct utmpx` only.
Tested both `login` and `logoutd` with utmps and both work correctly.
[1]: http://skarnet.org/software/utmps/
Equivalent of `mkdir -p`. It will create all parent directories.
Example: `useradd -d /home2/testu1 -m testu1`
Based on https://github.com/shadow-maint/shadow/pull/2 by Thorsten Kukuk
and Thorsten Behrens which was Code from pwdutils 3.2.2 with slight adaptations.
Adapted to so it applies to current code.
Otherwise our spw_next() will cause us to skip an entry.
Ideally we'd be able to do an swp_rewind(1), but I don't
see a helper for this.
Closes#60
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
Translate remaining strings to Norwegian bokmål (nb). Also, cure previous translation of excessive anglicism and apply a more consistent use of actual Norwegian syntax.
This is necessary to match the kernel-side policy of "self-mapping in a
user namespace is fine, but you cannot drop groups" -- a policy that was
created in order to stop user namespaces from allowing trivial privilege
escalation by dropping supplementary groups that were "blacklisted" from
certain paths.
This is the simplest fix for the underlying issue, and effectively makes
it so that unless a user has a valid mapping set in /etc/subgid (which
only administrators can modify) -- and they are currently trying to use
that mapping -- then /proc/$pid/setgroups will be set to deny. This
workaround is only partial, because ideally it should be possible to set
an "allow_setgroups" or "deny_setgroups" flag in /etc/subgid to allow
administrators to further restrict newgidmap(1).
We also don't write anything in the "allow" case because "allow" is the
default, and users may have already written "deny" even if they
technically are allowed to use setgroups. And we don't write anything if
the setgroups policy is already "deny".
Ref: https://bugs.launchpad.net/ubuntu/+source/shadow/+bug/1729357
Fixes: CVE-2018-7169
Reported-by: Craig Furman <craig.furman89@gmail.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
In case a system uses remote identity server (LDAP) the group lookup
can be very slow. We avoid it when we already know the user has the
group membership.
Do not reset the pid_child to 0 if the child process is still
running. This else-condition can be reached with pid being -1,
therefore explicitly test this condition.
This is a regression fix for CVE-2017-2616. If su receives a
signal like SIGTERM, it is not propagated to the child.
Reported-by: Radu Duta <raduduta@gmail.com>
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The third field in the /etc/shadow file (sp_lstchg) contains the date of
the last password change expressed as the number of days since Jan 1, 1970.
As this is a relative time, creating a user today will result in:
username:17238:0:99999:7:::
whilst creating the same user tomorrow will result in:
username:17239:0:99999:7:::
This has an impact for the Reproducible Builds[0] project where we aim to
be independent of as many elements the build environment as possible,
including the current date.
This patch changes the behaviour to use the SOURCE_DATE_EPOCH[1]
environment variable (instead of Jan 1, 1970) if valid.
[0] https://reproducible-builds.org/
[1] https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Chris Lamb <lamby@debian.org>
If ptr->line == NULL for an entry, the first cycle will exit,
but the second one will happily write past entries buffer.
We actually do not want to exit the first cycle prematurely
on ptr->line == NULL.
Signed-off-by: Tomas Mraz <tmraz@fedoraproject.org>
If su is compiled with PAM support, it is possible for any local user
to send SIGKILL to other processes with root privileges. There are
only two conditions. First, the user must be able to perform su with
a successful login. This does NOT have to be the root user, even using
su with the same id is enough, e.g. "su $(whoami)". Second, SIGKILL
can only be sent to processes which were executed after the su process.
It is not possible to send SIGKILL to processes which were already
running. I consider this as a security vulnerability, because I was
able to write a proof of concept which unlocked a screen saver of
another user this way.
This reverts the behavior of "useradd --root" to using the settings
from login.defs in the target root directory, not the root of the
executed useradd command.
Without this patch, PAM enabled builds crash when encountering an
invalid key in login.defs or key overrides because of array overflows
To reproduce, simply
useradd -K Windows=broken
Signed-off-by: Bernhard Rosenkränzer <bero@lindev.ch>
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Previously, the allocation was optimized for an outdated
deployment style (that of /etc/group alongside nss_db). The issue
here is that this results in extremely poor performance when using
SSSD, Winbind or nss_ldap.
There were actually two serious bugs here that have been addressed:
1) Running getgrent() loops won't work in most SSSD or Winbind
environments, as full group enumeration is disabled by default.
This could easily result in auto-allocating a group that was
already in use. (This might result in a security issue as well, if
the shared GID is a privileged group).
2) For system groups, the loop was always iterating through the
complete SYS_GID_MIN->SYS_GID_MAX range. On SSSD and Winbind, this
means hundreds of round-trips to LDAP (unless the GIDs were
specifically configured to be ignored by the SSSD or winbindd).
To a user with a slow connection to their LDAP server, this would
appear as if groupadd -r was hung. (Though it would eventually
complete).
This patch changes the algorithm to be more favorable for LDAP
environments, at the expense of some performance when using nss_db.
Given that the DB is a local service, this should have a negligible
effect from a user's perspective.
With the new algorithm, we simply first iterate through all entries
in the local database with gr_next(), recording the IDs that are in
use. We then start from the highest presumed-available entry and
call getgrgid() to see if it is available. We continue this until
we come to the first unused GID. We then select that and return it.
If we make it through all the remaining IDs without finding a free
one, we start over from the beginning of the range and try to find
room in one of the gaps in the range.
The patch was originally written by Stephen Gallagher and applied
identically also to the user allocation by Tomáš Mráz.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
The useradd application resets the user data in /var/log/faillog, if it
exists and a new user is created.
pam_tally2 is used in many distributions.
Check for /var/log/tallylog and reset the user there.
Patch was written by Josef Moellers <jmoellers@suse.de>.
https://bugzilla.suse.com/show_bug.cgi?id=980486
Otherwise we get build warnings like:
sgroupio.c:255:6: warning: implicit declaration of function 'getdef_bool' [-Wimplicit-function-declaration]
shadowio.c:131:6: warning: implicit declaration of function 'getdef_bool' [-Wimplicit-function-declaration]
Enable the automake feature to produce silent output by default.
When compiling code, we now see things like:
$ make
CC addgrps.o
CC age.o
CC audit_help.o
...
This can be disabled via configure's --disable-silent-rules or
by passing V=1 to make.
Custom output (like in the man subdirs) don't (yet) respect this
feature. More work will be needed to clean those up.
Since xz is fairly common nowadays, and is typically smaller/faster than
bzip2 for people to decompress, switch shadow over too. We also merge
the two init locations into configure.ac to match newer autotools style.
The min automake version is bumped to 1.11 too since that's when xz was
released.
The autoconf/automake guys want AC_INIT to be passed the details of the
package directly rather than going through AM_INIT_AUTOMAKE. Update them
both to use the newer style.
This also allows us to pass in contact details for the project.
We set the minimum autoconf version to 2.64 as that's the first one to
support passing the homepage URL in to AC_INIT. That's a pretty old
release by now, so it shouldn't be a problem.
These assignments were pasted as is into the Makefile and
ended up as part of a rule. (Usually the .PRECIOUS rule
which is why the build system never attempted to execute it
as commands, hiding the problem.)
Signed-off-by: Wolfgang Bumiller <wry.git@bumiller.com>
Reported-by: Rahel A <ra00177@surrey.ac.uk>
Catch up with Automake's [1], which was part of v1.6b, cut 2002-07-28
[2]. Avoids:
$ autoreconf -v -f --install
...
libmisc/Makefile.am:4: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
...
src/Makefile.am:10: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
...
Consolidating with the earlier AM_CPPFLAGS avoids:
$ autoreconf -v -f --install
src/Makefile.am:72: warning: AM_CPPFLAGS multiply defined in condition TRUE ...
src/Makefile.am:10: ... 'AM_CPPFLAGS' previously defined here
autoreconf-2.69: Leaving directory `.'
[1]: http://git.savannah.gnu.org/cgit/automake.git/commit/?id=1415d22f6203206bc393fc4ea233123ba579222d
Summary: automake.in (generate_makefile): Suggest using AM_CPPFLAGS instead of INCLUDES
Date: 2002-07-09
[2]: http://git.savannah.gnu.org/cgit/automake.git/tag/?id=Release-1-6b
2016-04-29 17:30:18 -07:00
1437 changed files with 219883 additions and 128405 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
