Update changelog for 1:4.17.0~rc1-1 release

Update to upstream version '4.17.0~rc1'
with Debian dir 49328bccc4

Makefile.am

@@ -1,7 +1,5 @@
 ## Process this file with automake to produce Makefile.in
 
-EXTRA_DIST = NEWS README
-
 SUBDIRS = lib
 
 if ENABLE_SUBIDS
@@ -16,7 +14,7 @@ endif
 
 CLEANFILES = man/8.out man/po/remove-potcdate.* man/*/login.defs.d man/*/*.mo
 
-EXTRA_DIST = tests/
+EXTRA_DIST = NEWS README tests/
 
 dist-hook:
 	chmod -R u+w $(distdir)/tests

Makefile.in

@@ -167,7 +167,7 @@ DIST_SUBDIRS = lib libsubid src po contrib doc etc tests/unit man
 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/man/po/Makefile.in ABOUT-NLS AUTHORS.md COPYING \
 	ChangeLog NEWS README compile config.guess config.rpath \
-	config.sub install-sh ltmain.sh missing
+	config.sub install-sh ltmain.sh missing ylwrap
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -243,7 +243,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@
@@ -390,10 +389,10 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-EXTRA_DIST = tests/
 SUBDIRS = lib $(am__append_1) src po contrib doc etc tests/unit \
 	$(am__append_2)
 CLEANFILES = man/8.out man/po/remove-potcdate.* man/*/login.defs.d man/*/*.mo
+EXTRA_DIST = NEWS README tests/
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 

aclocal.m4

@@ -22,15 +22,14 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
 
 # ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
 #
-#   Copyright (C) 1999-2008, 2011-2019, 2021-2022 Free Software
-#   Foundation, Inc.
+#   Copyright (C) 1999-2008, 2011-2015 Free Software Foundation, Inc.
 #   Written by Thomas Tanner, 1999
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 21 LTDL_INIT
+# serial 20 LTDL_INIT
 
 # LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
 # ------------------------------------------
@@ -358,7 +357,7 @@ AC_CONFIG_COMMANDS_PRE([
     if test -n "$_LT_LIBOBJS"; then
       # Remove the extension.
       _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
-      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | $SED "$_lt_sed_drop_objext" | sort -u`; do
+      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
         _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
         _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
       done
@@ -496,7 +495,7 @@ AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
     # If you are looking for one http://www.opendarwin.org/projects/dlcompat
     lt_cv_sys_dlopen_deplibs=yes
     ;;
-  freebsd* | dragonfly* | midnightbsd*)
+  freebsd* | dragonfly*)
     lt_cv_sys_dlopen_deplibs=yes
     ;;
   gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -931,8 +930,8 @@ AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
 
-# pkg.m4 - Macros to locate and use pkg-config.   -*- Autoconf -*-
-# serial 12 (pkg-config-0.29.2)
+# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+# serial 11 (pkg-config-0.29.1)
 
 dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
 dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
@@ -974,7 +973,7 @@ dnl
 dnl See the "Since" comment for each macro you use to see what version
 dnl of the macros you require.
 m4_defun([PKG_PREREQ],
-[m4_define([PKG_MACROS_VERSION], [0.29.2])
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
 m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
     [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
 ])dnl PKG_PREREQ
@@ -1019,7 +1018,7 @@ dnl Check to see whether a particular set of modules exists. Similar to
 dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
 dnl
 dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-dnl only at the first occurrence in configure.ac, so if the first place
+dnl only at the first occurence in configure.ac, so if the first place
 dnl it's called might be skipped (such as if it is within an "if", you
 dnl have to call PKG_CHECK_EXISTS manually
 AC_DEFUN([PKG_CHECK_EXISTS],
@@ -1075,7 +1074,7 @@ AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
 AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
 
 pkg_failed=no
-AC_MSG_CHECKING([for $2])
+AC_MSG_CHECKING([for $1])
 
 _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
 _PKG_CONFIG([$1][_LIBS], [libs], [$2])
@@ -1085,17 +1084,17 @@ and $1[]_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.])
 
 if test $pkg_failed = yes; then
-        AC_MSG_RESULT([no])
+   	AC_MSG_RESULT([no])
         _PKG_SHORT_ERRORS_SUPPORTED
         if test $_pkg_short_errors_supported = yes; then
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
-        else
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
-        m4_default([$4], [AC_MSG_ERROR(
+	m4_default([$4], [AC_MSG_ERROR(
 [Package requirements ($2) were not met:
 
 $$1_PKG_ERRORS
@@ -1106,8 +1105,8 @@ installed software in a non-standard prefix.
 _PKG_TEXT])[]dnl
         ])
 elif test $pkg_failed = untried; then
-        AC_MSG_RESULT([no])
-        m4_default([$4], [AC_MSG_FAILURE(
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
 [The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
@@ -1117,10 +1116,10 @@ _PKG_TEXT
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
         ])
 else
-        $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-        $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
         AC_MSG_RESULT([yes])
-        $3
+	$3
 fi[]dnl
 ])dnl PKG_CHECK_MODULES
 

config.h.in

@@ -341,12 +341,6 @@
 /* Path to passwd program. */
 #undef PASSWD_PROGRAM
 
-/* Define if login should support the -r flag for rlogind. */
-#undef RLOGIN
-
-/* Define to the ruserok() "success" return value (0 or 1). */
-#undef RUSEROK
-
 /* Define to support the shadow group file. */
 #undef SHADOWGRP
 

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.71 for shadow 4.15.3.
+# Generated by GNU Autoconf 2.71 for shadow 4.17.0-rc1.
 #
 # Report bugs to <pkg-shadow-devel@lists.alioth.debian.org>.
 #
@@ -621,8 +621,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='shadow'
 PACKAGE_TARNAME='shadow'
-PACKAGE_VERSION='4.15.3'
-PACKAGE_STRING='shadow 4.15.3'
+PACKAGE_VERSION='4.17.0-rc1'
+PACKAGE_STRING='shadow 4.17.0-rc1'
 PACKAGE_BUGREPORT='pkg-shadow-devel@lists.alioth.debian.org'
 PACKAGE_URL='https://github.com/shadow-maint/shadow'
 
@@ -763,7 +763,6 @@ ac_ct_AR
 AR
 DLLTOOL
 OBJDUMP
-FILECMD
 NM
 ac_ct_DUMPBIN
 DUMPBIN
@@ -1489,7 +1488,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures shadow 4.15.3 to adapt to many kinds of systems.
+\`configure' configures shadow 4.17.0-rc1 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1560,7 +1559,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of shadow 4.15.3:";;
+     short | recursive ) echo "Configuration of shadow 4.17.0-rc1:";;
    esac
   cat <<\_ACEOF
 
@@ -1739,7 +1738,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-shadow configure 4.15.3
+shadow configure 4.17.0-rc1
 generated by GNU Autoconf 2.71
 
 Copyright (C) 2021 Free Software Foundation, Inc.
@@ -2339,7 +2338,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by shadow $as_me 4.15.3, which was
+It was created by shadow $as_me 4.17.0-rc1, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   $ $0$ac_configure_args_raw
@@ -3612,7 +3611,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='shadow'
- VERSION='4.15.3'
+ VERSION='4.17.0-rc1'
 
 
 printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h
@@ -3846,13 +3845,13 @@ AM_BACKSLASH='\'
 ac_config_headers="$ac_config_headers config.h"
 
 
-LIBSUBID_ABI_MAJOR=4
+LIBSUBID_ABI_MAJOR=5
 
 LIBSUBID_ABI_MINOR=0
 
 LIBSUBID_ABI_MICRO=0
 
-LIBSUBID_ABI=4.0.0
+LIBSUBID_ABI=5.0.0
 
 
 test "$prefix" = "NONE" && prefix="/usr"
@@ -6357,8 +6356,8 @@ esac
 
 
 
-macro_version='2.4.7'
-macro_revision='2.4.7'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -6986,13 +6985,13 @@ else
 	mingw*) lt_bad_file=conftest.nm/nofile ;;
 	*) lt_bad_file=/dev/null ;;
 	esac
-	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
 	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
 	  break 2
 	  ;;
 	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
 	    break 2
@@ -7130,7 +7129,7 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
       DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
@@ -7223,7 +7222,7 @@ else $as_nop
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -7266,7 +7265,7 @@ else $as_nop
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[	 ]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -7471,114 +7470,6 @@ esac
 
 
 
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}file", so it can be a program name with args.
-set dummy ${ac_tool_prefix}file; ac_word=$2
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-printf %s "checking for $ac_word... " >&6; }
-if test ${ac_cv_prog_FILECMD+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  if test -n "$FILECMD"; then
-  ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  case $as_dir in #(((
-    '') as_dir=./ ;;
-    */) ;;
-    *) as_dir=$as_dir/ ;;
-  esac
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
-    ac_cv_prog_FILECMD="${ac_tool_prefix}file"
-    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-FILECMD=$ac_cv_prog_FILECMD
-if test -n "$FILECMD"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5
-printf "%s\n" "$FILECMD" >&6; }
-else
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_FILECMD"; then
-  ac_ct_FILECMD=$FILECMD
-  # Extract the first word of "file", so it can be a program name with args.
-set dummy file; ac_word=$2
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-printf %s "checking for $ac_word... " >&6; }
-if test ${ac_cv_prog_ac_ct_FILECMD+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  if test -n "$ac_ct_FILECMD"; then
-  ac_cv_prog_ac_ct_FILECMD="$ac_ct_FILECMD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  case $as_dir in #(((
-    '') as_dir=./ ;;
-    */) ;;
-    *) as_dir=$as_dir/ ;;
-  esac
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_FILECMD="file"
-    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_FILECMD=$ac_cv_prog_ac_ct_FILECMD
-if test -n "$ac_ct_FILECMD"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FILECMD" >&5
-printf "%s\n" "$ac_ct_FILECMD" >&6; }
-else
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-fi
-
-  if test "x$ac_ct_FILECMD" = x; then
-    FILECMD=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    FILECMD=$ac_ct_FILECMD
-  fi
-else
-  FILECMD="$ac_cv_prog_FILECMD"
-fi
-
-
-
-
-
-
-
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
@@ -7722,7 +7613,7 @@ beos*)
 
 bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='$FILECMD -L'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
@@ -7756,14 +7647,14 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=$FILECMD
+      lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
     esac
@@ -7777,7 +7668,7 @@ haiku*)
   ;;
 
 hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
@@ -7824,7 +7715,7 @@ netbsd* | netbsdelf*-gnu)
 
 newos6*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
@@ -8197,29 +8088,13 @@ esac
 fi
 
 : ${AR=ar}
+: ${AR_FLAGS=cr}
 
 
 
 
 
 
-# Use ARFLAGS variable as AR's operation code to sync the variable naming with
-# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
-# higher priority because thats what people were doing historically (setting
-# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
-# variable obsoleted/removed.
-
-test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
-lt_ar_flags=$AR_FLAGS
-
-
-
-
-
-
-# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
-# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
-
 
 
 
@@ -8636,7 +8511,7 @@ esac
 
 if test "$lt_cv_nm_interface" = "MS dumpbin"; then
   # Gets list of data symbols to import.
-  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
   # Adjust the below global symbol transforms to fixup imported variables.
   lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
   lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
@@ -8654,20 +8529,20 @@ fi
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
 $lt_cdecl_hook\
 " -e 's/^T .* \(.*\)$/extern int \1();/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
 $lt_c_name_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
 
 # Transform an extracted symbol line into symbol name with lib prefix and
 # symbol address.
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
 $lt_c_name_lib_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
@@ -8691,7 +8566,7 @@ for ac_symprfx in "" "_"; do
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
     # Fake it for dumpbin and say T for any non-static function,
     # D for any global variable and I for any imported variable.
-    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
+    # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
@@ -8709,9 +8584,9 @@ for ac_symprfx in "" "_"; do
 "     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
-    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -8911,7 +8786,7 @@ case $with_sysroot in #(
    fi
    ;; #(
  /*)
-   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
    ;; #(
  no|'')
    ;; #(
@@ -9036,7 +8911,7 @@ ia64-*-hpux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE=32
 	;;
@@ -9057,7 +8932,7 @@ ia64-*-hpux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     if test yes = "$lt_cv_prog_gnu_ld"; then
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
 	  ;;
@@ -9069,7 +8944,7 @@ ia64-*-hpux*)
 	;;
       esac
     else
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -32"
 	  ;;
@@ -9095,7 +8970,7 @@ mips64*-*linux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     emul=elf
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *32-bit*)
 	emul="${emul}32"
 	;;
@@ -9103,7 +8978,7 @@ mips64*-*linux*)
 	emul="${emul}64"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *MSB*)
 	emul="${emul}btsmip"
 	;;
@@ -9111,7 +8986,7 @@ mips64*-*linux*)
 	emul="${emul}ltsmip"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *N32*)
 	emul="${emul}n32"
 	;;
@@ -9135,14 +9010,14 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
       *32-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    case `$FILECMD conftest.o` in
+	    case `/usr/bin/file conftest.o` in
 	      *x86-64*)
 		LD="${LD-ld} -m elf32_x86_64"
 		;;
@@ -9250,7 +9125,7 @@ printf "%s\n" "$lt_cv_cc_needs_belf" >&6; }
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*)
@@ -10033,8 +9908,8 @@ int forced_loaded() { return 2;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5
-      $AR $AR_FLAGS libconftest.a conftest.o 2>&5
+      echo "$AR cr libconftest.a conftest.o" >&5
+      $AR cr libconftest.a conftest.o 2>&5
       echo "$RANLIB libconftest.a" >&5
       $RANLIB libconftest.a 2>&5
       cat > conftest.c << _LT_EOF
@@ -10061,12 +9936,17 @@ printf "%s\n" "$lt_cv_ld_force_load" >&6; }
       _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-    darwin*)
-      case $MACOSX_DEPLOYMENT_TARGET,$host in
-        10.[012],*|,*powerpc*-darwin[5-8]*)
-          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-        *)
-          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[912]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*|11.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -10363,8 +10243,8 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a '.a' archive for static linking (except MSVC and
-# ICC, which need '.lib').
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
 libext=a
 
 with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -10882,7 +10762,7 @@ lt_prog_compiler_static=
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
 	  lt_prog_compiler_pic='-KPIC'
@@ -11305,15 +11185,15 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
 
   case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++ or Intel C++ Compiler.
+    # Microsoft Visual C++.
     if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
   interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
   openbsd* | bitrig*)
@@ -11368,7 +11248,7 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -11480,7 +11360,6 @@ _LT_EOF
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
-      file_list_spec='@'
       ;;
 
     interix[3-9]*)
@@ -11495,7 +11374,7 @@ _LT_EOF
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
       archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -11538,7 +11417,7 @@ _LT_EOF
 	  compiler_needs_object=yes
 	  ;;
 	esac
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
 	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
@@ -11550,14 +11429,13 @@ _LT_EOF
 
         if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
             echo "local: *; };" >> $output_objdir/$libname.ver~
             $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
 	tcc*)
-	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  export_dynamic_flag_spec='-rdynamic'
 	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
@@ -11567,7 +11445,7 @@ _LT_EOF
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
               echo "local: *; };" >> $output_objdir/$libname.ver~
               $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
@@ -11699,7 +11577,7 @@ _LT_EOF
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -11970,12 +11848,12 @@ fi
 
     cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++ or Intel C++ Compiler.
+      # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       case $cc_basename in
-      cl* | icl*)
-	# Native MSVC or ICC
+      cl*)
+	# Native MSVC
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	always_export_symbols=yes
@@ -12016,7 +11894,7 @@ fi
           fi'
 	;;
       *)
-	# Assume MSVC and ICC wrapper
+	# Assume MSVC wrapper
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	# Tell ltmain to make .lib files, not .a files.
@@ -12057,8 +11935,8 @@ fi
     output_verbose_link_cmd=func_echo_all
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
-    archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
-    module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -12092,7 +11970,7 @@ fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly* | midnightbsd*)
+    freebsd* | dragonfly*)
       archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -12273,7 +12151,6 @@ printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
 	# Fabrice Bellard et al's Tiny C Compiler
 	ld_shlibs=yes
 	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	;;
       esac
       ;;
@@ -12345,7 +12222,6 @@ printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
-      file_list_spec='@'
       ;;
 
     osf3*)
@@ -13038,7 +12914,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
@@ -13048,14 +12924,14 @@ cygwin* | mingw* | pw32* | cegcc*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
     ;;
 
-  *,cl* | *,icl*)
-    # Native MSVC or ICC
+  *,cl*)
+    # Native MSVC
     libname_spec='$name'
     soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
     library_names_spec='$libname.dll.lib'
@@ -13074,7 +12950,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       done
       IFS=$lt_save_ifs
       # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
       ;;
     cygwin*)
       # Convert to unix form, then to dos form, then back to unix form
@@ -13111,7 +12987,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     ;;
 
   *)
-    # Assume MSVC and ICC wrapper
+    # Assume MSVC wrapper
     library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
@@ -13144,7 +13020,7 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
   if test -x /usr/bin/objformat; then
@@ -14309,41 +14185,30 @@ striplib=
 old_striplib=
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
 printf %s "checking whether stripping libraries is possible... " >&6; }
-if test -z "$STRIP"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-else
-  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-    old_striplib="$STRIP --strip-debug"
-    striplib="$STRIP --strip-unneeded"
-    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-  else
-    case $host_os in
-    darwin*)
-      # FIXME - insert some real tests, host_os isn't really good enough
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-      ;;
-    freebsd*)
-      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
-        old_striplib="$STRIP --strip-debug"
-        striplib="$STRIP --strip-unneeded"
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-printf "%s\n" "yes" >&6; }
-      else
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-      fi
-      ;;
-    *)
+    else
       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-      ;;
-    esac
-  fi
+    fi
+    ;;
+  *)
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+    ;;
+  esac
 fi
 
 
@@ -15848,15 +15713,6 @@ printf "%s\n" "$shadow_cv_passwd_dir" >&6; }
 printf "%s\n" "#define PASSWD_PROGRAM \"$shadow_cv_passwd_dir/passwd\"" >>confdefs.h
 
 
-if test "$ac_cv_func_ruserok" = "yes"; then
-
-printf "%s\n" "#define RLOGIN 1" >>confdefs.h
-
-
-printf "%s\n" "#define RUSEROK 0" >>confdefs.h
-
-fi
-
 # Check whether --enable-shadowgrp was given.
 if test ${enable_shadowgrp+y}
 then :
@@ -16359,8 +16215,8 @@ printf "%s\n" "no" >&6; }
 fi
 
 pkg_failed=no
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for cmocka" >&5
-printf %s "checking for cmocka... " >&6; }
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for CMOCKA" >&5
+printf %s "checking for CMOCKA... " >&6; }
 
 if test -n "$CMOCKA_CFLAGS"; then
     pkg_cv_CMOCKA_CFLAGS="$CMOCKA_CFLAGS"
@@ -16400,7 +16256,7 @@ fi
 
 
 if test $pkg_failed = yes; then
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+   	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
 
 if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -16409,26 +16265,26 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-                CMOCKA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "cmocka" 2>&1`
+	        CMOCKA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "cmocka" 2>&1`
         else
-                CMOCKA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "cmocka" 2>&1`
+	        CMOCKA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "cmocka" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$CMOCKA_PKG_ERRORS" >&5
+	# Put the nasty error message in config.log where it belongs
+	echo "$CMOCKA_PKG_ERRORS" >&5
 
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
 printf "%s\n" "$as_me: WARNING: libcmocka not found, cmocka tests will not be built" >&2;}
 elif test $pkg_failed = untried; then
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+     	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
 printf "%s\n" "$as_me: WARNING: libcmocka not found, cmocka tests will not be built" >&2;}
 else
-        CMOCKA_CFLAGS=$pkg_cv_CMOCKA_CFLAGS
-        CMOCKA_LIBS=$pkg_cv_CMOCKA_LIBS
+	CMOCKA_CFLAGS=$pkg_cv_CMOCKA_CFLAGS
+	CMOCKA_LIBS=$pkg_cv_CMOCKA_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-        have_cmocka="yes"
+	have_cmocka="yes"
 fi
  if test x$have_cmocka = xyes; then
   HAVE_CMOCKA_TRUE=
@@ -17062,8 +16918,8 @@ then :
 
 
 pkg_failed=no
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for libbsd-overlay" >&5
-printf %s "checking for libbsd-overlay... " >&6; }
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for LIBBSD" >&5
+printf %s "checking for LIBBSD... " >&6; }
 
 if test -n "$LIBBSD_CFLAGS"; then
     pkg_cv_LIBBSD_CFLAGS="$LIBBSD_CFLAGS"
@@ -17103,7 +16959,7 @@ fi
 
 
 if test $pkg_failed = yes; then
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+   	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
 
 if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -17112,14 +16968,14 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-                LIBBSD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libbsd-overlay" 2>&1`
+	        LIBBSD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libbsd-overlay" 2>&1`
         else
-                LIBBSD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libbsd-overlay" 2>&1`
+	        LIBBSD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libbsd-overlay" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$LIBBSD_PKG_ERRORS" >&5
+	# Put the nasty error message in config.log where it belongs
+	echo "$LIBBSD_PKG_ERRORS" >&5
 
-        as_fn_error $? "Package requirements (libbsd-overlay) were not met:
+	as_fn_error $? "Package requirements (libbsd-overlay) were not met:
 
 $LIBBSD_PKG_ERRORS
 
@@ -17130,9 +16986,9 @@ Alternatively, you may set the environment variables LIBBSD_CFLAGS
 and LIBBSD_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details." "$LINENO" 5
 elif test $pkg_failed = untried; then
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+     	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-        { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+	{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
@@ -17145,8 +17001,8 @@ See the pkg-config man page for more details.
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details" "$LINENO" 5; }
 else
-        LIBBSD_CFLAGS=$pkg_cv_LIBBSD_CFLAGS
-        LIBBSD_LIBS=$pkg_cv_LIBBSD_LIBS
+	LIBBSD_CFLAGS=$pkg_cv_LIBBSD_CFLAGS
+	LIBBSD_LIBS=$pkg_cv_LIBBSD_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
 
@@ -18230,7 +18086,7 @@ if test "x$ac_cv_lib_skey_skeychallenge" = xyes
 then :
   LIBSKEY=-lskey
 else $as_nop
-  as_fn_error $? "liskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2" "$LINENO" 5
+  as_fn_error $? "libskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2" "$LINENO" 5
 fi
 
 
@@ -20990,7 +20846,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by shadow $as_me 4.15.3, which was
+This file was extended by shadow $as_me 4.17.0-rc1, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -21059,7 +20915,7 @@ ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config='$ac_cs_config_escaped'
 ac_cs_version="\\
-shadow config.status 4.15.3
+shadow config.status 4.17.0-rc1
 configured by $0, generated by GNU Autoconf 2.71,
   with options \\"\$ac_cs_config\\"
 
@@ -21222,7 +21078,6 @@ lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_q
 lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
 reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
 reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`'
 OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
 deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
 file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
@@ -21231,7 +21086,6 @@ want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
 DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
 sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
 AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`'
 AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
 archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
 STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
@@ -21352,7 +21206,6 @@ LN_S \
 lt_SP2NL \
 lt_NL2SP \
 reload_flag \
-FILECMD \
 OBJDUMP \
 deplibs_check_method \
 file_magic_cmd \
@@ -21361,6 +21214,7 @@ want_nocaseglob \
 DLLTOOL \
 sharedlib_from_linklib_cmd \
 AR \
+AR_FLAGS \
 archiver_list_spec \
 STRIP \
 RANLIB \
@@ -22343,9 +22197,6 @@ to_host_file_cmd=$lt_cv_to_host_file_cmd
 # convert \$build files to toolchain format.
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
-# A file(cmd) program that detects file types.
-FILECMD=$lt_FILECMD
-
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
@@ -22370,11 +22221,8 @@ sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
 # The archiver.
 AR=$lt_AR
 
-# Flags to create an archive (by configure).
-lt_ar_flags=$lt_ar_flags
-
 # Flags to create an archive.
-AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
+AR_FLAGS=$lt_AR_FLAGS
 
 # How to feed a file listing to the archiver.
 archiver_list_spec=$lt_archiver_list_spec
@@ -22750,7 +22598,7 @@ ltmain=$ac_aux_dir/ltmain.sh
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  $SED '$q' "$ltmain" >> "$cfgfile" \
+  sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
    mv -f "$cfgfile" "$ofile" ||

configure.ac

@@ -1,10 +1,10 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_PREREQ([2.69])
-m4_define([libsubid_abi_major], 4)
+m4_define([libsubid_abi_major], 5)
 m4_define([libsubid_abi_minor], 0)
 m4_define([libsubid_abi_micro], 0)
 m4_define([libsubid_abi], [libsubid_abi_major.libsubid_abi_minor.libsubid_abi_micro])
-AC_INIT([shadow], [4.15.3], [pkg-shadow-devel@lists.alioth.debian.org], [],
+AC_INIT([shadow], [4.17.0-rc1], [pkg-shadow-devel@lists.alioth.debian.org], [],
 	[https://github.com/shadow-maint/shadow])
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects tar-pax])
 AC_CONFIG_MACRO_DIRS([m4])
@@ -159,13 +159,6 @@ fi])
 AC_DEFINE_UNQUOTED(PASSWD_PROGRAM, "$shadow_cv_passwd_dir/passwd",
 	[Path to passwd program.])
 
-dnl XXX - quick hack, should disappear before anyone notices :).
-dnl XXX - I just read the above message :).
-if test "$ac_cv_func_ruserok" = "yes"; then
-	AC_DEFINE(RLOGIN, 1, [Define if login should support the -r flag for rlogind.])
-	AC_DEFINE(RUSEROK, 0, [Define to the ruserok() "success" return value (0 or 1).])
-fi
-
 AC_ARG_ENABLE(shadowgrp,
 	[AS_HELP_STRING([--enable-shadowgrp], [enable shadow group support @<:@default=yes@:>@])],
 	[case "${enableval}" in
@@ -696,7 +689,7 @@ AC_SUBST(LIBMD)
 if test "$with_skey" = "yes"; then
 	AC_CHECK_LIB(md, MD5Init, [LIBMD=-lmd])
 	AC_CHECK_LIB(skey, skeychallenge, [LIBSKEY=-lskey],
-		[AC_MSG_ERROR([liskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2])])
+		[AC_MSG_ERROR([libskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2])])
 	AC_DEFINE(SKEY, 1, [Define to support S/Key logins.])
 	AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 		#include <stdio.h>

contrib/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

contrib/adduser.c

@@ -118,6 +118,9 @@
 #include <sys/stat.h>
 #include <syslog.h>
 
+#include "string/strcmp/streq.h"
+
+
 #define IMMEDIATE_CHANGE	/* Expire newly created password, must be changed
 				 * immediately upon next login */
 #define HAVE_QUOTAS		/* Obvious */
@@ -291,12 +294,10 @@ main (void)
 	  printf ("Home Directory [%s/%s]: ", DEFAULT_HOME, usrname);
 	  fflush (stdout);
 	  safeget (dir, sizeof (dir));
-	  if (!strlen (dir))
-	    {			/* hit return */
-	      sprintf (dir, "%s/%s", DEFAULT_HOME, usrname);
-	    }
+	  if (!strlen(dir))  /* hit return */
+	    sprintf(dir, "%s/%s", DEFAULT_HOME, usrname);
 	  else if (dir[strlen (dir) - 1] == '/')
-	    sprintf (dir+strlen(dir), "%s", usrname);
+	    strcat(dir, usrname);
 	}
       else
 	{
@@ -308,7 +309,7 @@ main (void)
       fflush (stdout);
       safeget (shell, sizeof (shell));
       if (!strlen (shell))
-	sprintf (shell, "%s", DEFAULT_SHELL);
+	strcpy(shell, DEFAULT_SHELL);
       else
 	{
 	  char *sh;
@@ -316,7 +317,7 @@ main (void)
 #ifdef HAVE_GETUSERSHELL
 	  setusershell ();
 	  while ((sh = getusershell ()) != NULL)
-	    if (!strcmp (shell, sh))
+	    if (streq(shell, sh))
 	      ok = 1;
 	  endusershell ();
 #endif
@@ -327,7 +328,7 @@ main (void)
 	      else
 		{
 		  printf ("Shell NOT in /etc/shells, DEFAULT used\n");
-		  sprintf (shell, "%s", DEFAULT_SHELL);
+		  strcpy(shell, DEFAULT_SHELL);
 		}
 	    }
 	}
@@ -491,12 +492,12 @@ safeget (char *buf, int maxlen)
       bad = (!isalnum (c) && (c != '_') && (c != ' '));
       *(buf++) = c;
     }
-  *buf = '\0';
+  stpcpy(buf, "");
 
   if (bad)
     {
       printf ("\nString contained banned character. Please stick to alphanumerics.\n");
-      *bstart = '\0';
+      stpcpy(bstart, "");
     }
 }
 

debian/Makefile

@@ -0,0 +1,16 @@
+PKG=shadow
+SITE=ftp://pkg-shadow.alioth.debian.org/pub/pkg-shadow/
+
+deb:: check_cheese
+
+include /usr/share/quilt/quilt.debbuild.mk
+
+check_cheese:
+	@dpkg-parsechangelog | grep -q "\* The \".*\".* release\." || { \
+		echo ""; \
+		echo " **                                  **"; \
+		echo " **  Warning: not a cheesy release!  **"; \
+		echo " **                                  **"; \
+		echo ""; \
+		exit 1; \
+	}

debian/NEWS

@@ -0,0 +1,71 @@
+shadow (1:4.16.0-5) unstable; urgency=medium
+
+  /var/log/faillog and the programs to read it are no longer part since
+  1:4.15.2-2.
+  The file isn't cleaned up automatically, which should be done manually,
+  unless it is still needed for special reasons.
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Sat, 16 Nov 2024 15:48:35 +0100
+
+shadow (1:4.13+dfsg1-2) unstable; urgency=medium
+
+  The previous entry falsely states that PREVENT_NO_AUTH in /etc/login.defs
+  affects authentication.  The historical default of letting all users with
+  empty password field in without authentication is still in effect.
+
+ -- Balint Reczey <balint@balintreczey.hu>  Mon, 25 Sep 2023 17:04:09 +0200
+
+shadow (1:4.11.1+dfsg1-0exp1) experimental; urgency=medium
+
+  Login now prevents an empty password field to be interpreted as
+  "no authentication required" for UID 0 (root account).
+  The historical default of letting all users with empty password field
+  in without authentication can be restored in /etc/login.defs setting
+  PREVENT_NO_AUTH to "no".
+
+ -- Balint Reczey <balint@balintreczey.hu>  Sun, 07 Nov 2021 21:51:46 +0100
+
+shadow (1:4.7-1) unstable; urgency=medium
+
+  * /etc/securetty is no longer shipped by this package and it is no longer
+    honored in login's PAM configuration by default. Please see #731656 for the
+    details.
+
+ -- Balint Reczey <rbalint@ubuntu.com>  Thu, 20 Jun 2019 13:46:52 +0200
+
+shadow (1:4.0.15-5) unstable; urgency=low
+
+  * commands passed in argument to su must use su's -c option and must quote
+    the command if it contains a space, as in:
+        su - root -c "ls -l /"
+    The following commands won't work anymore:
+        su - root -c ls -l /
+        su - root "ls -l /"
+        su - root ls -l /
+
+ -- Christian Perrier <bubulle@debian.org>  Sat,  8 Apr 2006 20:11:38 +0200
+
+shadow (1:4.0.14-1) unstable; urgency=low
+
+  * passwd does not support the -f, -s, and -g options anymore. You should use
+    the chfn, chsh and gpasswd utilities instead.
+  * login now distributes the nologin utility, which can be used as a shell
+    to politely refuse a login
+
+ -- Christian Perrier <bubulle@debian.org>  Thu,  5 Jan 2006 08:47:44 +0100
+
+shadow (1:4.0.12-1) unstable; urgency=low
+
+  CLOSE_SESSIONS and other variables are not used anymore in
+  /etc/login/defs.
+  As shadow utilities which use this file now warn about unknown
+  entries there, administrators should remove such unknown entries.
+  The supplied login.defs file does not include them anymore.
+
+  dpasswd is no more distributed by upstream. Login do not support
+  dialup password anymore.  Re-introducing this functionality in
+  upstream is not trivial.
+
+
+ -- Christian Perrier <bubulle@debian.org>  Thu, 25 Aug 2005 08:38:47 +0200
+

debian/README.Debian

@@ -0,0 +1,62 @@
+Read this file first for a brief overview of the new versions of login
+and passwd.
+
+
+---Shadow passwords
+
+The command `shadowconfig on' will turn on shadow password support.
+`shadowconfig off' will turn it back off.  If you turn on shadow
+password support, you'll gain the ability to set password ages and
+expirations with chage(1).
+
+NOTE: If you use the nscd package, you may have problems with a
+slight delay in updating the password information. You may notice
+this during upgrades of certain packages that try to add a system
+user and then access the users information immediately afterwards.
+To avoid this, it is suggested that you stop the nscd daemon before
+upgrades, then restart it again.
+
+---General configuration
+
+Most of the configuration for the shadow utilities is in
+/etc/login.defs.  See login.defs(5).  The defaults are quite
+reasonable.
+
+Also see the /etc/pam.d/* files for each program to configure the PAM
+support. PAM documentation is available in several formats in the
+libpam-doc package.
+
+
+---MD5 Encryption
+
+This is enabled now using the /etc/pam.d/* files. Examples are given.
+
+
+---Adding users and groups
+
+Though you may add users and groups with the SysV type commands,
+useradd and groupadd, I recommend you add them with Debian adduser
+version 3+.  adduser gives you more configuration and conforms to the
+Debian UID and GID allocation.
+
+Editing user and group parameters can be done with usermod and
+groupmod.  Removing users and groups can be done with userdel and
+groupdel.
+
+
+--- Group administration
+
+Local group allocation is much easier.  With gpasswd(1) you can
+designate users to administer groups.  They can then securely add or
+remove users from the group.
+
+
+--- What to read next?
+
+Read the manpages, the other files in this directory, and the Shadow
+Password HOWTO (included in the doc-linux package).  A large portion
+of these files deals with getting shadow installed.  You can, of
+course, ignore those parts.
+
+Also, the libpam-doc package will go a long way to allowing you to take
+full advantage of the PAM authentication scheme.

debian/README.source

@@ -0,0 +1,8 @@
+If you update the translation of upsteam files (thank you for that!) please
+submit a pull request upstream instead of filing a bug in the Debian BTS
+to get it reviewed and accepted faster.
+
+A testsuite is also available. Instruction on how to run this testsuite
+are available in tests/README
+
+ -- Balint Reczey <balint@balintreczey.hu>, Mon, 31 Jan 2022 14:07:11 +0100

debian/TODO

@@ -0,0 +1,19 @@
+Things that should be done:
+ * Verify the files left in debian/tmp
+   + e.g. /etc/default/adduser should be installed
+ * Check the build system: rebuilding the package twoce in the same tree
+   doubles the size of the diff.gz file
+
+Other points (not related to the release of a syncronized shadow):
+ * compare the source with the usages and man pages
+   + probably add a sentence to chsh/chfn's manpages about authentication
+     required for ordinary users
+ * do something (a tool) for the variables in login.defs
+   In Debian, some tools are not compiled with the PAM support, so upstream
+   getdef.c won't be OK.
+   It should be nice to see in each man page the set of variables used.
+   The Debian package can now compile (export DEB_BUILD_OPTIONS='nostrip debug')
+   with the debugging informations. This may be used to extract the set of
+   variables used in Debian/for each tools.
+ * verify all the patches around (I've found patches for at least RedHat,
+   OWL, LFS, Mandriva, Gentoo; are they already applied?)

debian/bugs-usertags

@@ -0,0 +1,25 @@
+This described the usertags used by the team.
+
+For usertags documentation, see
+http://lists.debian.org/debian-devel-announce/2005/09/msg00002.html
+
+All bugs tagged by team members must be tagged with 
+"user pkg-shadow-devel@lists.alioth.debian.org"
+
+Tags list
+---------
+
+toclose:         This bug has been announced to be closed in case no more news
+                 or information is received from the bug submitter or someone
+                 else until the delay specified in the limits_YYYYMMDD tag
+
+limits-YYYYMMDD: combine it with "toclose". Specifies the date after which
+                 bugs can be closed without other action in case no news 
+                 is received
+
+manpages-replace A bug reported angainst a manpages-xx package to indicate
+                 conflicting man pages. This tag can be used to tune the
+                 Replaces fields.
+
+su-transition:   This bug is related to the su transition (#276419)
+

debian/control

@@ -0,0 +1,92 @@
+Source: shadow
+Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Uploaders:
+ Serge Hallyn <serge@hallyn.com>,
+ Chris Hofstaedtler <zeha@debian.org>
+Section: admin
+Priority: required
+Build-Depends:
+ bison,
+ debhelper-compat (= 13),
+ dh-package-notes,
+ dh-sequence-zz-debputy-rrr (>= 0.1.23~),
+ docbook-xml <!nodoc>,
+ docbook-xsl <!nodoc>,
+ gettext,
+ itstool <!nodoc>,
+ libacl1-dev,
+ libattr1-dev,
+ libaudit-dev [linux-any],
+ libbsd-dev,
+ libcrypt-dev,
+ libltdl-dev,
+ libpam0g-dev,
+ libselinux1-dev [linux-any],
+ libsemanage-dev [linux-any],
+ libxml2-utils <!nodoc>,
+ pkgconf,
+ quilt,
+ systemd-dev [linux-any],
+ xsltproc <!nodoc>
+Standards-Version: 4.7.0
+Vcs-Git: https://salsa.debian.org/debian/shadow.git -b master
+Vcs-Browser: https://salsa.debian.org/debian/shadow
+Homepage: https://github.com/shadow-maint/shadow
+Rules-Requires-Root: no
+
+Package: passwd
+Architecture: any
+Multi-Arch: foreign
+Depends:
+ base-passwd (>= 3.6.4),
+ libpam-modules,
+ login.defs
+Recommends:
+ sensible-utils
+Replaces:
+ login (<< 1:4.16.0-2~)
+Description: change and administer password and group data
+ This package includes passwd, chsh, chfn, and many other programs to
+ maintain password and group data.
+ .
+ Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
+
+Package: login.defs
+Architecture: all
+Multi-Arch: foreign
+Replaces:
+ login (<< 1:4.16.0-2~)
+Description: system user management configuration
+ This package provides the login.defs configuration file,
+ used by otherwise unrelated tools managing system users.
+
+Package: uidmap
+Architecture: any
+Multi-Arch: foreign
+Priority: optional
+Description: programs to help use subuids
+ These programs help unprivileged users to create uid and gid mappings in
+ user namespaces.
+
+Package: libsubid5
+Section: libs
+Priority: optional
+Architecture: any
+Multi-Arch: same
+Description: subordinate id handling library -- shared library
+ The library provides an interface for querying, granding and ungranting
+ subordinate user and group ids.
+
+Package: libsubid-dev
+Section: libdevel
+Priority: optional
+Architecture: any
+Multi-Arch: same
+Depends:
+ libsubid5 (= ${binary:Version})
+Description: subordinate id handling library -- shared library
+ The library provides an interface for querying, granding and ungranting
+ subordinate user and group ids.
+ .
+ This package contains the C header files that are
+ needed for applications to use the libsubid library.

debian/copyright

@@ -0,0 +1,181 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Shadow
+Source: https://github.com/shadow-maint/shadow
+
+Files: *
+Copyright: 1989-1994, Julianne Frances Haugh
+           2016-2024, Serge Hallyn <serge@hallyn.com>
+License: BSD-3-clause
+
+Files: man/po/da.po
+       man/po/de.po
+       man/tr/man1/su.1
+       po/da.po
+       po/de.po
+       po/es.po
+       po/eu.po
+       po/fi.po
+       po/gl.po
+       po/it.po
+       po/kk.po
+       po/nb.po
+       po/nl.po
+       po/nn.po
+       po/pl.po
+       po/pt_BR.po
+       po/ru.po
+       po/sq.po
+       po/sv.po
+       po/vi.po
+Copyright: 1999-2015, Free Software Foundation, Inc
+License: BSD-3-clause
+
+Files: man/fi/man1/chfn.1
+       man/id/man1/*
+       man/ko/man1/chfn.1
+       man/ko/man1/chsh.1
+       man/tr/man1/chfn.1
+       man/zh_TW/man1/chfn.1
+       man/zh_TW/man1/chsh.1
+Copyright: 1994, salvatore valente <svalente@athena.mit.edu>
+License: GPL-1
+
+Files: man/pt_BR/man8/*
+       man/zh_TW/man8/usermod.8
+Copyright: 1991-1994, Julianne Frances Haugh
+License: BSD-3-clause
+
+Files: man/hu/man1/gpasswd.1
+       man/ja/man1/gpasswd.1
+       man/pt_BR/man1/*
+Copyright: 1996, Rafal Maszkowski <rzm@pdi.net>
+License: BSD-3-clause
+
+Files: man/id/man1/login.1
+       man/ko/man1/login.1
+       man/tr/man1/login.1
+Copyright: 1993, Rickard E. Faith <faith@cs.unc.edu>
+License: BSD-3-clause
+
+Files: man/ja/man5/limits.5
+       man/ja/man8/vipw.8
+Copyright: 2001, Maki KURODA
+License: BSD-3-clause
+
+Files: man/pt_BR/man5/passwd.5
+       man/tr/man5/passwd.5
+Copyright: 1993, Michael Haardt <michael@moria.de>
+License: GPL-2+
+
+Files: man/ja/man1/chage.1
+       man/ja/man5/suauth.5
+Copyright: 1997, Kazuyoshi Furutaka
+License: BSD-3-clause
+
+Files: man/po/fr.po
+       po/fr.po
+Copyright: 2011-2013, Debian French l10n team <debian-l10n-french@lists.debian.org>
+License: BSD-3-clause
+
+Files: man/zh_TW/man5/*
+Copyright: 1993, Michael Haardt <michael@moria.de>
+           1993, Scorpio, www.linuxforum.net
+License: GPL-2+
+
+Files: man/hu/man5/*
+Copyright: 1993, Michael Haardt <u31b3hs@pool.informatik.rwth-aachen.de>
+License: GPL-2+
+
+Files: contrib/adduser2.sh
+Copyright: 1996, Petri Mattila, Prihateam Networks <petri@prihateam.fi>
+License: GPL-2+
+
+Files: lib/subordinateio.h
+Copyright: 2012, Eric W. Biederman
+License: BSD-3-clause
+
+Files: man/hu/man1/su.1
+Copyright: 1999, Ragnar Hojland Espinosa <ragnar@macula.net>
+License: BSD-3-clause
+
+Files: man/ja/man8/pwconv.8
+Copyright: 2001, Yuichi SATO
+License: BSD-3-clause
+
+Files: src/login_nopam.c
+Copyright: 1995, Wietse Venema
+License: BSD-3-clause
+
+Files: src/su.c
+Copyright: 1989 - 1994, Julianne Frances Haugh
+           1996 - 2000, Marek Michałkiewicz
+           2000 - 2006, Tomasz Kłoczko
+           2007 - 2013, Nicolas François
+License: GPL-2+
+
+Files: src/vipw.c
+Copyright: 1997, Guy Maor <maor@ece.utexas.edu>
+           1999 - 2000, Marek Michałkiewicz
+           2002 - 2006, Tomasz Kłoczko
+           2007 - 2013, Nicolas François
+License: GPL-2+
+
+Files: man/ko/man5/*
+Copyright: 2000, ASPLINUX <man@asp-linux.co.kr>
+License: GPL-2+
+
+Files: debian/*
+Copyright: 1999-2001, Ben Collins <bcollins@debian.org>
+           2001-2004 Karl Ramm <kcr@debian.org>
+           2004-2014 Christian Perrier <bubulle@debian.org>
+           2006-2012 Nicolas Francois (Nekral) <nicolas.francois@centraliens.net>
+           2017-2022 Balint Reczey <balint@balintreczey.hu>
+License: BSD-3-clause
+
+Files: debian/passwd.expire.cron
+Copyright: 1999, Ben Collins <bcollins@debian.org>
+License: BSD-3-clause
+
+License: BSD-3-clause
+ All rights reserved.
+ .
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the University nor the names of its contributors
+    may be used to endorse or promote products derived from this software
+    without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+License: GPL-1
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 1
+ .
+ On Debian systems, the complete text of version 1 of the GNU General
+ Public License can be found in '/usr/share/common-licenses/GPL-1'.
+
+License: GPL-2+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 dated June, 1991, or (at
+ your option) any later version.
+ .
+ On Debian systems, the complete text of version 2 of the GNU General
+ Public License can be found in '/usr/share/common-licenses/GPL-2'.

debian/debputy.manifest

@@ -0,0 +1,24 @@
+manifest-version: '0.1'
+packages:
+  passwd:
+    transformations:
+    - path-metadata:
+        paths:
+        - usr/bin/chfn
+        - usr/bin/chsh
+        - usr/bin/gpasswd
+        - usr/bin/passwd
+        mode: "u=rwxs,go=rx"
+    - path-metadata:
+        paths:
+        - usr/bin/chage
+        - usr/bin/expiry
+        group: "shadow"
+        mode: "u=rwx,go=rxs"
+  uidmap:
+    transformations:
+    - path-metadata:
+        paths:
+        - usr/bin/newgidmap
+        - usr/bin/newuidmap
+        mode: "u=rwxs,go=rx"

debian/default/useradd

@@ -0,0 +1,37 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DSHELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account 
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=no
+

debian/dependencies

@@ -0,0 +1,94 @@
+Build-Depends:
+==============
+ * autoconf
+ * automake1.9
+   works with 1.7 or 1.9 (at least)
+ * libtool
+ * gettext
+   POT, PO, GMO regenerated?
+ * libpam0g-dev
+   OK
+ * debhelper (>= 4.1.16)
+ * po-debconf
+   OK
+ * quilt
+   patch system
+ * dpkg-dev (>= 1.13.5)
+ * xsltproc
+   used to generate the manpages
+ * docbook-xsl
+   needed for /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl
+ * docbook-xml
+   manpages/docbook.xsl includes html/docbook.xsl
+   (But it is not strictly needed. The generated manpages are identical.
+   Without it, a warning is generated.)
+   Needed by JH_CHECK_XML_CATALOG([-//OASIS//DTD DocBook XML V4.1.2//EN], [DocBook XML DTD V4.1.2], [], enable_man=no)
+ * libxml2-utils
+   needed by the JH_CHECK_XML_CATALOG macros
+ * cdbs
+   used in debian/rules
+ * libselinux1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64]
+ * gnome-doc-utils (>= 0.4.3-1)
+   xml2po, 0.4.3-1 needed for the -l switch.
+
+passwd Depends:
+===============
+ * ${shlibs:Depends}
+   OK
+ * ${loginpam}
+   - hurd
+     login
+     libpam-modules (>= 0.72-5)
+   - other archs
+     + login (>= 970502-1)
+       login is needed because some passwd utils need /etc/login.defs
+       login is Essential, so this is just to enforce the version
+     + libpam-modules (>= 0.72-5)
+ * debianutils (>= 2.15.2)
+   After 1:4.0.12-6, {add,remove}-shell are distributed in debianutils (2.15)
+   /etc/shell was forgotten and introduced in debianutils in 2.15.2
+
+passwd Conflicts:
+=================
+
+passwd Replaces:
+================
+   Some of the passwd man pages are also distributed in some manpages* packages.
+   Look at the debian/02/run test to optimize these dependencies.
+   NOTE: Not all maintainers have been notified.
+ * manpages-de (<< 0.4-9), manpages-fi (<< 0.2-4), manpages-fr (<<1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-3), manpages-ja (<< 0.5.0.0.20050915-1), manpages-ko (<< 20050219-2), manpages-es (<< 1.55-4), manpages-es-extra (<< 0.8a-15), manpages-ru (<< 0.98-3)
+   All those packages have been updated during sarge->etch. So these Replaces
+   should be removed after lenny release
+ * manpages-tr, manpages-zh
+   Those packages are still in etch, so the Replaces should be kept even
+   after lenny release
+
+login Pre-Depends:
+==================
+ * ${shlibs:Depends}
+ * libpam-runtime (>= 0.76-14)
+   sarge contained 0.76-22
+
+Why Pre-Depends? (because it's an essential package?)
+
+login Depends:
+==============
+ * libpam-modules (>= 0.72-5)
+   libpam-modules is needed.
+   potato contained 0.72-9
+
+login Conflicts:
+================
+
+login Replaces:
+===============
+ * Some of the login man pages are also distributed in some manpages* packages.
+   Look at the debian/02/run test to optimize these dependencies.
+   NOTE: Not all maintainers have been notified.
+   - manpages-fi, manpages-fr (<<1.64.0-1), manpages-hu, manpages-it, manpages-ko, manpages-ja (<< 0.5.0.0.20050915-1), manpages-de (<< 0.4-10), manpages-es-extra (<<0.8a-15) 
+     Those are packages that have been updated during sarge->etch. These
+     Replaces should be removed after lenny
+   - manpages-tr, manpages-zh
+     Those packages are still in etch, so the Replaces should be kept even
+     after lenny release
+

debian/gbp.conf

@@ -0,0 +1,2 @@
+[pq]
+patch-numbers = False

debian/gitlab-ci.yml

@@ -0,0 +1,7 @@
+variables:
+  RELEASE: 'unstable'
+  # workaround for https://salsa.debian.org/salsa-ci-team/pipeline/-/issues/259
+  SALSA_CI_REPROTEST_ARGS: --vary=domain_host.use_sudo=1
+include:
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml

debian/libsubid-dev.install

@@ -0,0 +1,3 @@
+usr/include/*
+usr/lib/*/libsubid.a
+usr/lib/*/libsubid.so

debian/libsubid5.install

@@ -0,0 +1 @@
+usr/lib/*/libsubid.so.*

debian/libsubid5.symbols

@@ -0,0 +1,11 @@
+libsubid.so.5 libsubid5 #MINVER#
+ subid_free@Base 1:4.16.0
+ subid_get_gid_owners@Base 1:4.16.0
+ subid_get_gid_ranges@Base 1:4.16.0
+ subid_get_uid_owners@Base 1:4.16.0
+ subid_get_uid_ranges@Base 1:4.16.0
+ subid_grant_gid_range@Base 1:4.16.0
+ subid_grant_uid_range@Base 1:4.16.0
+ subid_init@Base 1:4.16.0
+ subid_ungrant_gid_range@Base 1:4.16.0
+ subid_ungrant_uid_range@Base 1:4.16.0

debian/login.defs.install

@@ -0,0 +1 @@
+etc/login.defs etc

debian/login.defs.manpages

@@ -0,0 +1,2 @@
+usr/share/man/*/man5/login.defs.5
+usr/share/man/man5/login.defs.5

debian/login.defs.postinst

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+set -e
+
+_adopt_conffile() {
+    conffile=$1
+    pkg=$2
+
+    [ -f ${conffile}.dpkg-bak ] || return 0
+
+    md5sum="$(md5sum ${conffile} | sed -e 's/ .*//')"
+    old_md5sum="$(dpkg-query -W -f='${Conffiles}' $pkg | \
+                        sed -n -e "\' ${conffile} ' { s/ obsolete$//; s/.* //; p }")"
+    # On new installs, if the conffile was preserved on upgrade by
+    # dpkg-maintscript helper, copy it back if the new file has not been
+    # modified yet
+    if [ "$md5sum" = "$old_md5sum" ]; then
+        mv ${conffile}.dpkg-bak ${conffile}
+    fi
+}
+
+if [ "$1" = configure ] && [ -z "$2" ]; then
+    _adopt_conffile /etc/login.defs login.defs
+fi
+
+#DEBHELPER#

debian/not-installed

@@ -0,0 +1,54 @@
+bin/groups
+bin/login
+# Workaround debhelper complaining about login.defs, although we install it.
+etc/login.defs
+etc/pam.d/chfn
+etc/pam.d/chage
+etc/pam.d/chpasswd
+etc/pam.d/chsh
+etc/pam.d/groupadd
+etc/pam.d/groupdel
+etc/pam.d/groupmems
+etc/pam.d/groupmod
+etc/pam.d/login
+etc/pam.d/newusers
+etc/pam.d/passwd
+etc/pam.d/useradd
+etc/pam.d/userdel
+etc/pam.d/usermod
+sbin/nologin
+usr/bin/newgrp
+usr/bin/faillog
+usr/bin/sg
+usr/lib/*/libsubid.la
+usr/sbin/groupmems
+usr/sbin/logoutd
+usr/sbin/vigr
+usr/share/man/*/man1/groups.1
+usr/share/man/*/man1/login.1
+usr/share/man/*/man1/logoutd.1
+usr/share/man/*/man1/newgrp.1
+usr/share/man/*/man1/sg.1
+usr/share/man/*/man1/su.1
+usr/share/man/*/man3/getspnam.3
+usr/share/man/*/man3/shadow.3
+usr/share/man/*/man5/faillog.5
+usr/share/man/*/man5/suauth.5
+usr/share/man/*/man8/faillog.8
+usr/share/man/*/man8/groupmems.8
+usr/share/man/*/man8/logoutd.8
+usr/share/man/*/man8/nologin.8
+usr/share/man/man1/groups.1
+usr/share/man/man1/login.1
+usr/share/man/man1/logoutd.1
+usr/share/man/man1/newgrp.1
+usr/share/man/man1/sg.1
+usr/share/man/man1/su.1
+usr/share/man/man3/getspnam.3
+usr/share/man/man3/shadow.3
+usr/share/man/man5/faillog.5
+usr/share/man/man5/suauth.5
+usr/share/man/man8/faillog.8
+usr/share/man/man8/groupmems.8
+usr/share/man/man8/logoutd.8
+usr/share/man/man8/nologin.8

debian/passwd.chage.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'chage' service
+#
+
+# This allows root to change password aging being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.chfn.pam

@@ -0,0 +1,16 @@
+#
+# The PAM configuration file for the Shadow `chfn' service
+#
+
+# This allows root to change user infomation without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+@include common-auth
+@include common-account
+@include common-session
+
+

debian/passwd.chpasswd.pam

@@ -0,0 +1,5 @@
+# The PAM configuration file for the Shadow 'chpasswd' service
+#
+
+@include common-password
+

debian/passwd.chsh.pam

@@ -0,0 +1,20 @@
+#
+# The PAM configuration file for the Shadow `chsh' service
+#
+
+# This will not allow a user to change their shell unless
+# their current one is listed in /etc/shells. This keeps
+# accounts with special shells from changing them.
+auth       required   pam_shells.so
+
+# This allows root to change user shell without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+@include common-auth
+@include common-account
+@include common-session
+

debian/passwd.dirs

@@ -0,0 +1,2 @@
+etc/default
+usr/share/lintian/overrides

debian/passwd.examples

@@ -0,0 +1 @@
+debian/passwd.expire.cron

debian/passwd.expire.cron

@@ -0,0 +1,57 @@
+#!/usr/bin/perl
+#
+# passwd.expire.cron: sample expiry notification script for use as a cronjob
+#
+# Copyright 1999 by Ben Collins <bcollins@debian.org>, complete rights granted
+# for use, distribution, modification, etc.
+#
+# Usage:
+#	edit the listed options, including the actual email, then rename to
+#	/etc/cron.daily/passwd
+#
+#	If your users don't have a valid login shell (ie. they are ftp or mail
+#	users only), they will need some other way to change their password
+#	(telnet will work since login will handle password aging, or a poppasswd
+#	program, if they are mail users).
+
+# <CONFIG> #
+
+# should be same as /etc/adduser.conf
+$LOW_UID=1000;
+$HIGH_UID=29999;
+
+# this let's the MTA handle the domain,
+# set it manually if you want. Make sure
+# you also add the @ like "\@domain.com"
+$MAIL_DOM="";
+
+# </CONFIG> #
+
+# Set the current day reference
+$curdays = int(time() / (60 * 60 * 24));
+
+# Now go through the list
+
+open(SH, "< /etc/shadow");
+while (<SH>) {
+    @shent = split(':', $_);
+    @userent = getpwnam($shent[0]);
+    if ($userent[2] >= $LOW_UID && $userent[2] <= $HIGH_UID) {
+	if ($curdays > $shent[2] + $shent[4] - $shent[5] &&
+		$shent[4] != -1 && $shent[4] != 0 &&
+		$shent[5] != -1 && $shent[5] != 0) {
+	    $daysleft = ($shent[2] + $shent[4]) - $curdays;
+	    if ($daysleft == 1) { $days = "day"; } else {$days = "days"; }
+            if ($daysleft < 0) { next; }
+	    open (MAIL, "| mail -s '[WARNING] account will expire in $daysleft $days' $shent[0]${MAIL_DOM}");
+	    print MAIL <<EOF;
+Your account will expire in $daysleft $days. Please change your password before
+then or your account will expire
+EOF
+	    close (MAIL);
+	    # This makes sure we also get a list of almost expired users
+	    print "$shent[0]'s account will expire in $daysleft days\n";
+	}
+    }
+    @userent = getpwent();
+}

debian/passwd.groupadd.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'groupadd' service
+#
+
+# This allows root to add groups without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.groupdel.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'groupdel' service
+#
+
+# This allows root to remove groups without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.groupmod.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'groupmod' service
+#
+
+# This allows root to modify groups without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.install

@@ -0,0 +1,25 @@
+debian/default/useradd etc/default
+debian/shadowconfig usr/sbin
+usr/bin/chage
+usr/bin/chfn
+usr/bin/chsh
+usr/bin/expiry
+usr/bin/gpasswd
+usr/bin/passwd
+usr/sbin/chgpasswd
+usr/sbin/chpasswd
+usr/sbin/groupadd
+usr/sbin/groupdel
+usr/sbin/groupmod
+usr/sbin/grpck
+usr/sbin/grpconv
+usr/sbin/grpunconv
+usr/sbin/newusers
+usr/sbin/pwck
+usr/sbin/pwconv
+usr/sbin/pwunconv
+usr/sbin/useradd
+usr/sbin/userdel
+usr/sbin/usermod
+usr/sbin/vipw
+usr/share/locale/*/LC_MESSAGES/shadow.mo

debian/passwd.links

@@ -0,0 +1 @@
+usr/sbin/vipw usr/sbin/vigr

debian/passwd.lintian-overrides

@@ -0,0 +1,6 @@
+passwd: elevated-privileges 2755 root/shadow [usr/bin/chage]
+passwd: elevated-privileges 4755 root/root [usr/bin/chfn]
+passwd: elevated-privileges 4755 root/root [usr/bin/chsh]
+passwd: elevated-privileges 2755 root/shadow [usr/bin/expiry]
+passwd: elevated-privileges 4755 root/root [usr/bin/gpasswd]
+passwd: elevated-privileges 4755 root/root [usr/bin/passwd]

debian/passwd.maintscript

@@ -0,0 +1 @@
+rm_conffile /etc/cron.daily/passwd 1:4.7-2~

debian/passwd.manpages

@@ -0,0 +1,58 @@
+usr/share/man/*/man1/chage.1
+usr/share/man/*/man1/chfn.1
+usr/share/man/*/man1/chsh.1
+usr/share/man/*/man1/expiry.1
+usr/share/man/*/man1/gpasswd.1
+usr/share/man/*/man1/passwd.1
+usr/share/man/*/man5/gshadow.5
+usr/share/man/*/man5/passwd.5
+usr/share/man/*/man5/shadow.5
+usr/share/man/*/man5/subgid.5
+usr/share/man/*/man5/subuid.5
+usr/share/man/*/man8/chgpasswd.8
+usr/share/man/*/man8/chpasswd.8
+usr/share/man/*/man8/groupadd.8
+usr/share/man/*/man8/groupdel.8
+usr/share/man/*/man8/groupmod.8
+usr/share/man/*/man8/grpck.8
+usr/share/man/*/man8/grpconv.8
+usr/share/man/*/man8/grpunconv.8
+usr/share/man/*/man8/newusers.8
+usr/share/man/*/man8/pwck.8
+usr/share/man/*/man8/pwconv.8
+usr/share/man/*/man8/pwunconv.8
+usr/share/man/*/man8/shadowconfig.8
+usr/share/man/*/man8/useradd.8
+usr/share/man/*/man8/userdel.8
+usr/share/man/*/man8/usermod.8
+usr/share/man/*/man8/vigr.8
+usr/share/man/*/man8/vipw.8
+usr/share/man/man1/chage.1
+usr/share/man/man1/chfn.1
+usr/share/man/man1/chsh.1
+usr/share/man/man1/expiry.1
+usr/share/man/man1/gpasswd.1
+usr/share/man/man1/passwd.1
+usr/share/man/man5/gshadow.5
+usr/share/man/man5/passwd.5
+usr/share/man/man5/shadow.5
+usr/share/man/man5/subgid.5
+usr/share/man/man5/subuid.5
+usr/share/man/man8/chgpasswd.8
+usr/share/man/man8/chpasswd.8
+usr/share/man/man8/groupadd.8
+usr/share/man/man8/groupdel.8
+usr/share/man/man8/groupmod.8
+usr/share/man/man8/grpck.8
+usr/share/man/man8/grpconv.8
+usr/share/man/man8/grpunconv.8
+usr/share/man/man8/newusers.8
+usr/share/man/man8/pwck.8
+usr/share/man/man8/pwconv.8
+usr/share/man/man8/pwunconv.8
+usr/share/man/man8/shadowconfig.8
+usr/share/man/man8/useradd.8
+usr/share/man/man8/userdel.8
+usr/share/man/man8/usermod.8
+usr/share/man/man8/vigr.8
+usr/share/man/man8/vipw.8

debian/passwd.newusers.pam

@@ -0,0 +1,5 @@
+# The PAM configuration file for the Shadow 'newusers' service
+#
+
+@include common-password
+

debian/passwd.passwd.pam

@@ -0,0 +1,6 @@
+#
+# The PAM configuration file for the Shadow `passwd' service
+#
+
+@include common-password
+

debian/passwd.postinst

@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+case "$1" in
+configure)
+	if ! getent group shadow | grep -q '^shadow:[^:]*:42'
+	then
+		groupadd -g 42 shadow || (
+    			cat <<EOF
+Group ID 42 has been allocated for the shadow group.  You have either
+used 42 yourself or created a shadow group with a different ID.
+Please correct this problem and reconfigure with ``dpkg --configure passwd''.
+
+Note that both user and group IDs in the range 0-99 are globally
+allocated by the Debian project and must be the same on every Debian
+system.
+EOF
+    			exit 1
+		)
+	fi
+    ;;
+esac
+
+# Run shadowconfig only on new installs
+[ -z "$2" ] && shadowconfig on
+
+#DEBHELPER#
+
+exit 0

debian/passwd.tmpfiles

@@ -0,0 +1,8 @@
+# If a password operation is in progress and we lose power, stale lockfiles
+# can be left behind.  Clear them on boot.
+r! /etc/gshadow.lock
+r! /etc/shadow.lock
+r! /etc/passwd.lock
+r! /etc/group.lock
+r! /etc/subuid.lock
+r! /etc/subgid.lock

debian/passwd.useradd.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'useradd' service
+#
+
+# This allows root to add users without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.userdel.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'userdel' service
+#
+
+# This allows root to remove users without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/passwd.usermod.pam

@@ -0,0 +1,8 @@
+# The PAM configuration file for the Shadow 'groupdel' service
+#
+
+# This allows root to remove groups without being prompted for a password
+auth		sufficient	pam_rootok.so
+
+# checks for account validity
+account	required	pam_permit.so

debian/patches/debian/Adapt-login.defs-for-Debian.patch

@@ -0,0 +1,517 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sun, 7 Jul 2024 14:06:39 +0200
+Subject: Adapt login.defs for Debian
+
+Remove settings only applicable to shadow's su, which we do not use.
+Remove settings only applicable without PAM support enabled.
+Remove obscure commented-out settings.
+Remove explanation about write(1), which Debian does not ship anymore.
+---
+ etc/login.defs | 375 ++++++++-------------------------------------------------
+ 1 file changed, 47 insertions(+), 328 deletions(-)
+
+diff --git a/etc/login.defs b/etc/login.defs
+index 33622c2..91d3ec4 100644
+--- a/etc/login.defs
++++ b/etc/login.defs
+@@ -1,24 +1,38 @@
+ #
+ # /etc/login.defs - Configuration control definitions for the shadow package.
+ #
+-#	$Id$
+-#
+ 
+-#
+-# Delay in seconds before being allowed another attempt after a login failure
+-# Note: When PAM is used, some modules may enforce a minimum delay (e.g.
+-#       pam_unix(8) enforces a 2s delay)
+-#
+-FAIL_DELAY		3
+-
+-#
+-# Enable logging and display of /var/log/faillog login(1) failure info.
+-#
+-FAILLOG_ENAB		yes
++# REQUIRED for useradd/userdel/usermod
++#   Directory where mailboxes reside, _or_ name of file, relative to the
++#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
++#   MAIL_DIR takes precedence.
++#
++#   Essentially:
++#      - MAIL_DIR defines the location of users mail spool files
++#        (for mbox use) by appending the username to MAIL_DIR as defined
++#        below.
++#      - MAIL_FILE defines the location of the users mail spool files as the
++#        fully-qualified filename obtained by prepending the user home
++#        directory before $MAIL_FILE
++#
++# NOTE: This is no more used for setting up users MAIL environment variable
++#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
++#       job of the pam_mail PAM modules
++#       See default PAM configuration files provided for
++#       login, su, etc.
++#
++# This is a temporary situation: setting these variables will soon
++# move to /etc/default/useradd and the variables will then be
++# no more supported
++MAIL_DIR        /var/mail
++#MAIL_FILE      .mail
+ 
+ #
+ # Enable display of unknown usernames when login(1) failures are recorded.
+ #
++# WARNING: Unknown usernames may become world readable.
++# See #290803 and #298773 for details about how this could become a security
++# concern
+ LOG_UNKFAIL_ENAB	no
+ 
+ #
+@@ -26,110 +40,12 @@ LOG_UNKFAIL_ENAB	no
+ #
+ LOG_OK_LOGINS		no
+ 
+-#
+-# Enable logging and display of /var/log/lastlog login(1) time info.
+-#
+-LASTLOG_ENAB		yes
+-
+-#
+-# Limit the highest user ID number for which the lastlog entries should
+-# be updated.
+-#
+-# No LASTLOG_UID_MAX means that there is no user ID limit for writing
+-# lastlog entries.
+-#
+-#LASTLOG_UID_MAX
+-
+-#
+-# Enable checking and display of mailbox status upon login.
+-#
+-# Disable if the shell startup files already check for mail
+-# ("mailx -e" or equivalent).
+-#
+-MAIL_CHECK_ENAB		yes
+-
+-#
+-# Enable additional checks upon password changes.
+-#
+-OBSCURE_CHECKS_ENAB	yes
+-
+-#
+-# Enable checking of time restrictions specified in /etc/porttime.
+-#
+-PORTTIME_CHECKS_ENAB	yes
+-
+-#
+-# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field.
+-#
+-QUOTAS_ENAB		yes
+-
+-#
+-# Enable "syslog" logging of su(1) activity - in addition to sulog file logging.
+-# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1).
+-#
+-SYSLOG_SU_ENAB		yes
+-SYSLOG_SG_ENAB		yes
+-
+-#
+-# If defined, either full pathname of a file containing device names or
+-# a ":" delimited list of device names.  Root logins will be allowed only
+-# from these devices.
+-#
+-CONSOLE		/etc/securetty
+-#CONSOLE	console:tty01:tty02:tty03:tty04
+-
+-#
+-# If defined, all su(1) activity is logged to this file.
+-#
+-#SULOG_FILE	/var/log/sulog
+-
+-#
+-# If defined, ":" delimited list of "message of the day" files to
+-# be displayed upon login.
+-#
+-MOTD_FILE	/etc/motd
+-#MOTD_FILE	/etc/motd:/usr/lib/news/news-motd
+-
+-#
+-# If defined, this file will be output before each login(1) prompt.
+-#
+-#ISSUE_FILE	/etc/issue
+-
+ #
+ # If defined, file which maps tty line to TERM environment parameter.
+ # Each line of the file is in a format similar to "vt100  tty01".
+ #
+ #TTYTYPE_FILE	/etc/ttytype
+ 
+-#
+-# If defined, login(1) failures will be logged here in a utmp format.
+-# last(1), when invoked as lastb(1), will read /var/log/btmp, so...
+-#
+-FTMP_FILE	/var/log/btmp
+-
+-#
+-# If defined, name of file whose presence will inhibit non-root
+-# logins.  The content of this file should be a message indicating
+-# why logins are inhibited.
+-#
+-NOLOGINS_FILE	/etc/nologin
+-
+-#
+-# If defined, the command name to display when running "su -".  For
+-# example, if this is defined as "su" then ps(1) will display the
+-# command as "-su".  If not defined, then ps(1) will display the
+-# name of the shell actually being run, e.g. something like "-sh".
+-#
+-SU_NAME		su
+-
+-#
+-# *REQUIRED*
+-#   Directory where mailboxes reside, _or_ name of file, relative to the
+-#   home directory.  If you _do_ define both, MAIL_DIR takes precedence.
+-#
+-MAIL_DIR	/var/spool/mail
+-#MAIL_FILE	.mail
+-
+ #
+ # If defined, file which inhibits all the usual chatter during the login
+ # sequence.  If a full pathname, then hushed mode will be enabled if the
+@@ -139,40 +55,21 @@ MAIL_DIR	/var/spool/mail
+ HUSHLOGIN_FILE	.hushlogin
+ #HUSHLOGIN_FILE	/etc/hushlogins
+ 
+-#
+-# If defined, either a TZ environment parameter spec or the
+-# fully-rooted pathname of a file containing such a spec.
+-#
+-#ENV_TZ		TZ=CST6CDT
+-#ENV_TZ		/etc/tzname
+-
+-#
+-# If defined, an HZ environment parameter spec.
+-#
+-# for Linux/x86
+-ENV_HZ		HZ=100
+-# For Linux/Alpha...
+-#ENV_HZ		HZ=1024
+-
+ #
+ # *REQUIRED*  The default PATH settings, for superuser and normal users.
+ #
+ # (they are minimal, add the rest in the shell startup files)
+-ENV_SUPATH	PATH=/sbin:/bin:/usr/sbin:/usr/bin
+-ENV_PATH	PATH=/bin:/usr/bin
++ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
++ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ 
+ #
+-# Terminal permissions
++# Terminal permissions for terminals after login(1).
++# These settings are ignored for remote and other logins.
+ #
+ #	TTYGROUP	Login tty will be assigned this group ownership.
+ #	TTYPERM		Login tty will be set to this permission.
+ #
+-# If you have a write(1) program which is "setgid" to a special group
+-# which owns the terminals, define TTYGROUP as the number of such group
+-# and TTYPERM as 0620.  Otherwise leave TTYGROUP commented out and
+-# set TTYPERM to either 622 or 600.
+-#
+-TTYGROUP	tty
++#TTYGROUP	tty
+ TTYPERM		0600
+ 
+ #
+@@ -180,61 +77,35 @@ TTYPERM		0600
+ #
+ #	ERASECHAR	Terminal ERASE character ('\010' = backspace).
+ #	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
+-#	ULIMIT		Default "ulimit" value.
+ #
+ # The ERASECHAR and KILLCHAR are used only on System V machines.
+-# The ULIMIT is used only if the system supports it.
+-# (now it works with setrlimit too; ulimit is in 512-byte units)
+-#
+-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+ #
+ ERASECHAR	0177
+ KILLCHAR	025
+-#ULIMIT		2097152
+-
+-# Default initial "umask" value used by login(1) on non-PAM enabled systems.
+-# Default "umask" value for pam_umask(8) on PAM enabled systems.
+-# UMASK is also used by useradd(8) and newusers(8) to set the mode for new
+-# home directories if HOME_MODE is not set.
+-# 022 is the default value, but 027, or even 077, could be considered
+-# for increased privacy. There is no One True Answer here: each sysadmin
+-# must make up their mind.
+-UMASK		022
+ 
+ # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new
+ # home directories.
+-# If HOME_MODE is not set, the value of UMASK is used to create the mode.
+-#HOME_MODE	0700
++HOME_MODE	0700
+ 
+ #
+ # Password aging controls:
+ #
+ #	PASS_MAX_DAYS	Maximum number of days a password may be used.
+ #	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
+-#	PASS_MIN_LEN	Minimum acceptable password length.
+ #	PASS_WARN_AGE	Number of days warning given before a password expires.
+ #
+ PASS_MAX_DAYS	99999
+ PASS_MIN_DAYS	0
+-PASS_MIN_LEN	5
+ PASS_WARN_AGE	7
+ 
+-#
+-# If "yes", the user must be listed as a member of the first gid 0 group
+-# in /etc/group (called "root" on most Linux systems) to be able to "su"
+-# to uid 0 accounts.  If the group doesn't exist or is empty, no one
+-# will be able to "su" to uid 0.
+-#
+-SU_WHEEL_ONLY	no
+-
+ #
+ # Min/max values for automatic uid selection in useradd(8)
+ #
+ UID_MIN			 1000
+ UID_MAX			60000
+ # System accounts
+-SYS_UID_MIN		  101
+-SYS_UID_MAX		  999
++#SYS_UID_MIN		  101
++#SYS_UID_MAX		  999
+ # Extra per user uids
+ SUB_UID_MIN		   100000
+ SUB_UID_MAX		600100000
+@@ -246,8 +117,8 @@ SUB_UID_COUNT		    65536
+ GID_MIN			 1000
+ GID_MAX			60000
+ # System accounts
+-SYS_GID_MIN		  101
+-SYS_GID_MAX		  999
++#SYS_GID_MIN		  101
++#SYS_GID_MAX		  999
+ # Extra per user group ids
+ SUB_GID_MIN		   100000
+ SUB_GID_MAX		600100000
+@@ -255,6 +126,9 @@ SUB_GID_COUNT		    65536
+ 
+ #
+ # Max number of login(1) retries if password is bad
++# This will most likely be overriden by PAM, since the default pam_unix module
++# has it's own built in of 3 retries. However, this is a safe fallback in case
++# you are using an authentication module that does not enforce PAM_MAXTRIES.
+ #
+ LOGIN_RETRIES		5
+ 
+@@ -263,28 +137,6 @@ LOGIN_RETRIES		5
+ #
+ LOGIN_TIMEOUT		60
+ 
+-#
+-# Maximum number of attempts to change password if rejected (too easy)
+-#
+-PASS_CHANGE_TRIES	5
+-
+-#
+-# Warn about weak passwords (but still allow them) if you are root.
+-#
+-PASS_ALWAYS_WARN	yes
+-
+-#
+-# Number of significant characters in the password for crypt().
+-# Default is 8, don't change unless your crypt() is better.
+-# Ignored if MD5_CRYPT_ENAB set to "yes".
+-#
+-#PASS_MAX_LEN		8
+-
+-#
+-# Require password before chfn(1)/chsh(1) can make any changes.
+-#
+-CHFN_AUTH		yes
+-
+ #
+ # Which fields may be changed by regular users using chfn(1) - use
+ # any combination of letters "frwh" (full name, room number, work
+@@ -294,29 +146,6 @@ CHFN_AUTH		yes
+ CHFN_RESTRICT		rwh
+ 
+ #
+-# Password prompt (%s will be replaced by user name).
+-#
+-# XXX - it doesn't work correctly yet, for now leave it commented out
+-# to use the default which is just "Password: ".
+-#LOGIN_STRING		"%s's Password: "
+-
+-#
+-# Only works if compiled with MD5_CRYPT defined:
+-# If set to "yes", new passwords will be encrypted using the MD5-based
+-# algorithm compatible with the one used by recent releases of FreeBSD.
+-# It supports passwords of unlimited length and longer salt strings.
+-# Set to "no" if you need to copy encrypted passwords to other systems
+-# which don't understand the new algorithm.  Default is "no".
+-#
+-# Note: If you use PAM, it is recommended to use a value consistent with
+-# the PAM modules configuration.
+-#
+-# This variable is deprecated. You should use ENCRYPT_METHOD instead.
+-#
+-#MD5_CRYPT_ENAB	no
+-
+-#
+-# Only works if compiled with ENCRYPTMETHOD_SELECT defined:
+ # If set to MD5, MD5-based algorithm will be used for encrypting password
+ # If set to SHA256, SHA256-based algorithm will be used for encrypting password
+ # If set to SHA512, SHA512-based algorithm will be used for encrypting password
+@@ -326,66 +155,10 @@ CHFN_RESTRICT		rwh
+ # MD5 and DES should not be used for new hashes, see crypt(5) for recommendations.
+ # Overrides the MD5_CRYPT_ENAB option
+ #
+-# Note: If you use PAM, it is recommended to use a value consistent with
++# Note: It is recommended to use a value consistent with
+ # the PAM modules configuration.
+ #
+-#ENCRYPT_METHOD DES
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
+-#
+-# Define the number of SHA rounds.
+-# With a lot of rounds, it is more difficult to brute-force the password.
+-# However, more CPU resources will be needed to authenticate users if
+-# this value is increased.
+-#
+-# If not specified, the libc will choose the default number of rounds (5000),
+-# which is orders of magnitude too low for modern hardware.
+-# The values must be within the 1000-999999999 range.
+-# If only one of the MIN or MAX values is set, then this value will be used.
+-# If MIN > MAX, the highest value will be used.
+-#
+-#SHA_CRYPT_MIN_ROUNDS 5000
+-#SHA_CRYPT_MAX_ROUNDS 5000
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to BCRYPT.
+-#
+-# Define the number of BCRYPT rounds.
+-# With a lot of rounds, it is more difficult to brute-force the password.
+-# However, more CPU resources will be needed to authenticate users if
+-# this value is increased.
+-#
+-# If not specified, 13 rounds will be attempted.
+-# If only one of the MIN or MAX values is set, then this value will be used.
+-# If MIN > MAX, the highest value will be used.
+-#
+-#BCRYPT_MIN_ROUNDS 13
+-#BCRYPT_MAX_ROUNDS 13
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to YESCRYPT.
+-#
+-# Define the YESCRYPT cost factor.
+-# With a higher cost factor, it is more difficult to brute-force the password.
+-# However, more CPU time and more memory will be needed to authenticate users
+-# if this value is increased.
+-#
+-# If not specified, a cost factor of 5 will be used.
+-# The value must be within the 1-11 range.
+-#
+-#YESCRYPT_COST_FACTOR 5
+-
+-#
+-# List of groups to add to the user's supplementary group set
+-# when logging in from the console (as determined by the CONSOLE
+-# setting).  Default is none.
+-#
+-# Use with caution - it is possible for users to gain permanent
+-# access to these groups, even when not logged in from the console.
+-# How to do it is left as an exercise for the reader...
+-#
+-#CONSOLE_GROUPS		floppy:audio:cdrom
++ENCRYPT_METHOD YESCRYPT
+ 
+ #
+ # Should login be allowed if we can't cd to the home directory?
+@@ -401,12 +174,6 @@ DEFAULT_HOME	yes
+ #
+ NONEXISTENT	/nonexistent
+ 
+-#
+-# If this file exists and is readable, login environment will be
+-# read from it.  Every line should be in the form name=value.
+-#
+-ENVIRON_FILE	/etc/environment
+-
+ #
+ # If defined, this command is run when removing a user.
+ # It should remove any at/cron/print jobs etc. owned by
+@@ -415,59 +182,11 @@ ENVIRON_FILE	/etc/environment
+ #USERDEL_CMD	/usr/sbin/userdel_local
+ 
+ #
+-# Enable setting of the umask group bits to be the same as owner bits
+-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+-# the same as gid, and username is the same as the primary group name.
++# If set to yes, userdel(8) will remove the user's group if it contains no more
++# members, and useradd(8) will create by default a group with the name of the
++# user.
+ #
+-# This also enables userdel(8) to remove user groups if no members exist.
++# Other former uses of this variable are not used in PAM environments, such as
++# Debian.
+ #
+ USERGROUPS_ENAB yes
+-
+-#
+-# If set to a non-zero number, the shadow utilities will make sure that
+-# groups never have more than this number of users on one line.
+-# This permits to support split groups (groups split into multiple lines,
+-# with the same group ID, to avoid limitation of the line length in the
+-# group file).
+-#
+-# 0 is the default value and disables this feature.
+-#
+-#MAX_MEMBERS_PER_GROUP	0
+-
+-#
+-# If useradd(8) should create home directories for users by default (non
+-# system users only).
+-# This option is overridden with the -M or -m flags on the useradd(8)
+-# command-line.
+-#
+-#CREATE_HOME     yes
+-
+-#
+-# Force use shadow, even if shadow passwd & shadow group files are
+-# missing.
+-#
+-#FORCE_SHADOW    yes
+-
+-#
+-# Allow newuidmap and newgidmap when running under an alternative
+-# primary group.
+-#
+-#GRANT_AUX_GROUP_SUBIDS yes
+-
+-#
+-# Prevents an empty password field to be interpreted as "no authentication
+-# required".
+-# Set to "yes" to prevent for all accounts
+-# Set to "superuser" to prevent for UID 0 / root (default)
+-# Set to "no" to not prevent for any account (dangerous, historical default)
+-PREVENT_NO_AUTH superuser
+-
+-#
+-# Select the HMAC cryptography algorithm.
+-# Used in pam_timestamp module to calculate the keyed-hash message
+-# authentication code.
+-#
+-# Note: It is recommended to check hmac(3) to see the possible algorithms
+-# that are available in your system.
+-#
+-#HMAC_CRYPTO_ALGO SHA512

debian/patches/debian/Define-LOGIN_NAME_MAX-on-HURD.patch

@@ -0,0 +1,25 @@
+From: Chris Hofstaedtler <zeha@debian.org>
+Date: Tue, 6 Aug 2024 00:16:59 +0200
+Subject: Define LOGIN_NAME_MAX on HURD
+
+---
+ lib/chkname.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/lib/chkname.c b/lib/chkname.c
+index 95fbe10..c36bcc9 100644
+--- a/lib/chkname.c
++++ b/lib/chkname.c
+@@ -31,6 +31,12 @@
+ #include <sys/param.h>
+ #include <unistd.h>
+ 
++#ifdef __GNU__
++#ifndef LOGIN_NAME_MAX
++#define LOGIN_NAME_MAX 256
++#endif
++#endif
++
+ #include "defines.h"
+ #include "chkname.h"
+ 

debian/patches/debian/Document-the-shadowconfig-utility.patch

@@ -0,0 +1,280 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sat, 22 Jun 2024 17:39:41 +0200
+Subject: Document the shadowconfig utility
+
+Status wrt upstream: The shadowconfig utility is debian specific.
+Its man page also (but it used to be distributed)
+---
+ man/Makefile.am            |  2 ++
+ man/fr/Makefile.am         |  1 +
+ man/fr/man8/shadowconfig.8 | 26 +++++++++++++++++++++++
+ man/ja/Makefile.am         |  1 +
+ man/ja/man8/shadowconfig.8 | 25 ++++++++++++++++++++++
+ man/pl/Makefile.am         |  1 +
+ man/pl/man8/shadowconfig.8 | 27 ++++++++++++++++++++++++
+ man/shadowconfig.8         | 41 ++++++++++++++++++++++++++++++++++++
+ man/shadowconfig.8.xml     | 52 ++++++++++++++++++++++++++++++++++++++++++++++
+ 9 files changed, 176 insertions(+)
+ create mode 100644 man/fr/man8/shadowconfig.8
+ create mode 100644 man/ja/man8/shadowconfig.8
+ create mode 100644 man/pl/man8/shadowconfig.8
+ create mode 100644 man/shadowconfig.8
+ create mode 100644 man/shadowconfig.8.xml
+
+diff --git a/man/Makefile.am b/man/Makefile.am
+index 1405509..6f9dcd9 100644
+--- a/man/Makefile.am
++++ b/man/Makefile.am
+@@ -36,6 +36,7 @@ man_MANS = \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
++	man8/shadowconfig.8 \
+ 	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+@@ -106,6 +107,7 @@ man_XMANS = \
+ 	porttime.5.xml \
+ 	pwck.8.xml \
+ 	pwconv.8.xml \
++	shadowconfig.8.xml \
+ 	shadow.3.xml \
+ 	shadow.5.xml \
+ 	sg.1.xml \
+diff --git a/man/fr/Makefile.am b/man/fr/Makefile.am
+index 2365e23..e175a15 100644
+--- a/man/fr/Makefile.am
++++ b/man/fr/Makefile.am
+@@ -31,6 +31,7 @@ man_MANS = \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
++	man8/shadowconfig.8 \
+ 	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+diff --git a/man/fr/man8/shadowconfig.8 b/man/fr/man8/shadowconfig.8
+new file mode 100644
+index 0000000..784da70
+--- /dev/null
++++ b/man/fr/man8/shadowconfig.8
+@@ -0,0 +1,26 @@
++.\" This file was generated with po4a. Translate the source file.
++.\"
++.\"$Id: shadowconfig.8,v 1.4 2001/08/23 23:10:48 kloczek Exp $
++.TH SHADOWCONFIG 8 "19 avril 1997" "Debian GNU/Linux"
++.SH NOM
++shadowconfig \- active ou désactive les mots de passe cachés
++.SH SYNOPSIS
++\fBshadowconfig\fP \fIon\fP | \fIoff\fP
++.SH DESCRIPTION
++.PP
++\fBshadowconfig on\fP active les mots de passe cachés («\ shadow passwords\ »)\ ; \fBshadowconfig off\fP les désactive. \fBShadowconfig\fP affiche un message
++d'erreur et quitte avec une valeur de retour non nulle s'il rencontre
++quelque chose d'inattendu. Dans ce cas, vous devrez corriger l'erreur avant
++de recommencer.
++
++Activer les mots de passe cachés lorsqu'ils sont déjà activés, ou les
++désactiver lorsqu'ils ne sont pas actifs est sans effet.
++
++Lisez \fI/usr/share/doc/passwd/README.Debian\fP pour une brève introduction aux
++mots de passe cachés et à leurs fonctionnalités.
++
++Notez que désactiver puis réactiver les mots de passe cachés aura pour
++conséquence la perte des informations d'âge sur les mots de passe.
++.SH TRADUCTION
++Nicolas FRANÇOIS, 2004.
++Veuillez signaler toute erreur à <\fIdebian\-l10\-french@lists.debian.org\fR>.
+diff --git a/man/ja/Makefile.am b/man/ja/Makefile.am
+index b759726..b9f1df0 100644
+--- a/man/ja/Makefile.am
++++ b/man/ja/Makefile.am
+@@ -26,6 +26,7 @@ man_MANS = \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
++	man8/shadowconfig.8 \
+ 	man1/sg.1 \
+ 	man5/shadow.5 \
+ 	man1/su.1 \
+diff --git a/man/ja/man8/shadowconfig.8 b/man/ja/man8/shadowconfig.8
+new file mode 100644
+index 0000000..a75c6f7
+--- /dev/null
++++ b/man/ja/man8/shadowconfig.8
+@@ -0,0 +1,25 @@
++.\"     all right reserved,
++.\" Translated Tue Oct 30 11:59:11 JST 2001
++.\" by Maki KURODA <mkuroda@aisys-jp.com>
++.\"
++.TH SHADOWCONFIG 8 "19 Apr 1997" "Debian GNU/Linux"
++.SH 名前
++shadowconfig \- shadow パスワードの設定をオン及びオフに切替える
++.SH 書式
++.B "shadowconfig"
++.IR on " | " off
++.SH 説明
++.PP
++.B shadowconfig on
++は shadow パスワードを有効にする。
++.B shadowconfig off
++は shadow パスワードを無効にする。
++.B shadowconfig
++は何らかの間違いがあると、エラーメッセージを表示し、
++ゼロではない返り値を返す。
++もしそのようなことが起こった場合、エラーを修正し、再度実行しなければならない。
++shadow パスワードの設定がすでにオンの場合にオンに設定したり、
++すでにオフの場合にオフに設定しても、何の影響もない。
++
++.I /usr/share/doc/passwd/README.debian.gz
++には shadow パスワードとそれに関する特徴の簡単な紹介が書かれている。
+diff --git a/man/pl/Makefile.am b/man/pl/Makefile.am
+index 2a015f3..04093ec 100644
+--- a/man/pl/Makefile.am
++++ b/man/pl/Makefile.am
+@@ -17,6 +17,7 @@ man_MANS = \
+ 	man8/logoutd.8 \
+ 	man1/newgrp.1 \
+ 	man1/sg.1 \
++	man8/shadowconfig.8 \
+ 	man3/shadow.3 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/pl/man8/shadowconfig.8 b/man/pl/man8/shadowconfig.8
+new file mode 100644
+index 0000000..2016c9f
+--- /dev/null
++++ b/man/pl/man8/shadowconfig.8
+@@ -0,0 +1,27 @@
++.\" $Id: shadowconfig.8,v 1.3 2001/08/23 23:10:51 kloczek Exp $
++.\" {PTM/WK/1999-09-14}
++.TH SHADOWCONFIG 8 "19 kwietnia 1997" "Debian GNU/Linux"
++.SH NAZWA
++shadowconfig - przełącza ochronę haseł i grup przez pliki shadow
++.SH SKŁADNIA
++.B "shadowconfig"
++.IR on " | " off
++.SH OPIS
++.PP
++.B shadowconfig on
++włącza ochronę haseł i grup przez dodatkowe, przesłaniane pliki (shadow);
++.B shadowconfig off
++wyłącza dodatkowe pliki haseł i grup.
++.B shadowconfig
++wyświetla komunikat o błędzie i kończy pracę z niezerowym kodem jeśli
++znajdzie coś nieprawidłowego. W takim wypadku powinieneś poprawić błąd
++.\" if it finds anything awry.
++i uruchomić program ponownie.
++
++Włączenie ochrony haseł, gdy jest ona już włączona lub jej wyłączenie,
++gdy jest wyłączona jest nieszkodliwe.
++
++Przeczytaj
++.IR /usr/share/doc/passwd/README.debian.gz ,
++gdzie znajdziesz krótkie wprowadzenie do ochrony haseł z użyciem dodatkowych
++plików haseł przesłanianych (shadow passwords) i związanych tematów.
+diff --git a/man/shadowconfig.8 b/man/shadowconfig.8
+new file mode 100644
+index 0000000..c0ee0af
+--- /dev/null
++++ b/man/shadowconfig.8
+@@ -0,0 +1,41 @@
++.\"Generated by db2man.xsl. Don't modify this, modify the source.
++.de Sh \" Subsection
++.br
++.if t .Sp
++.ne 5
++.PP
++\fB\\$1\fR
++.PP
++..
++.de Sp \" Vertical space (when we can't use .PP)
++.if t .sp .5v
++.if n .sp
++..
++.de Ip \" List item
++.br
++.ie \\n(.$>=3 .ne \\$3
++.el .ne 3
++.IP "\\$1" \\$2
++..
++.TH "SHADOWCONFIG" 8 "19 Apr 1997" "" ""
++.SH NAME
++shadowconfig \- toggle shadow passwords on and off
++.SH "SYNOPSIS"
++.ad l
++.hy 0
++.HP 13
++\fBshadowconfig\fR \fB\fIon\fR\fR | \fB\fIoff\fR\fR
++.ad
++.hy
++
++.SH "DESCRIPTION"
++
++.PP
++\fBshadowconfig\fR on will turn shadow passwords on; \fIshadowconfig off\fR will turn shadow passwords off\&. \fBshadowconfig\fR will print an error message and exit with a nonzero code if it finds anything awry\&. If that happens, you should correct the error and run it again\&. Turning shadow passwords on when they are already on, or off when they are already off, is harmless\&.
++
++.PP
++Read \fI/usr/share/doc/passwd/README\&.Debian\fR for a brief introduction to shadow passwords and related features\&.
++
++.PP
++Note that turning shadow passwords off and on again will lose all password aging information\&.
++
+diff --git a/man/shadowconfig.8.xml b/man/shadowconfig.8.xml
+new file mode 100644
+index 0000000..b4080ea
+--- /dev/null
++++ b/man/shadowconfig.8.xml
+@@ -0,0 +1,52 @@
++<?xml version="1.0" encoding="UTF-8"?>
++<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
++		"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
++<refentry id='shadowconfig.8'>
++  <!-- $Id: shadowconfig.8.xml,v 1.6 2005/06/15 12:39:27 kloczek Exp $ -->
++  <refentryinfo>
++    <date>19 Apr 1997</date>
++  </refentryinfo>
++  <refmeta>
++    <refentrytitle>shadowconfig</refentrytitle>
++    <manvolnum>8</manvolnum>
++    <refmiscinfo class='date'>19 Apr 1997</refmiscinfo>
++    <refmiscinfo class='source'>Debian GNU/Linux</refmiscinfo>
++  </refmeta>
++  <refnamediv id='name'>
++    <refname>shadowconfig</refname>
++    <refpurpose>toggle shadow passwords on and off</refpurpose>
++  </refnamediv>
++
++  <refsynopsisdiv id='synopsis'>
++    <cmdsynopsis>
++      <command>shadowconfig</command>
++      <group choice='plain'>
++        <arg choice='plain'><replaceable>on</replaceable></arg>
++        <arg choice='plain'><replaceable>off</replaceable></arg>
++      </group>
++    </cmdsynopsis>
++  </refsynopsisdiv>
++
++  <refsect1 id='description'>
++    <title>DESCRIPTION</title>
++    <para><command>shadowconfig</command> on will turn shadow passwords on;
++      <emphasis remap='B'>shadowconfig off</emphasis> will turn shadow
++      passwords off. <command>shadowconfig</command> will print an error
++      message and exit with a nonzero code if it finds anything awry. If
++      that happens, you should correct the error and run it again. Turning
++      shadow passwords on when they are already on, or off when they are
++      already off, is harmless.
++    </para>
++
++    <para>
++      Read <filename>/usr/share/doc/passwd/README.Debian</filename> for a
++      brief introduction
++      to shadow passwords and related features.
++    </para>
++
++    <para>Note that turning shadow passwords off and on again will lose all
++      password
++      aging information.
++    </para>
++  </refsect1>
++</refentry>

debian/patches/debian/Keep-using-Debian-adduser-defaults.patch

@@ -0,0 +1,52 @@
+From: Balint Reczey <balint@balintreczey.hu>
+Date: Sat, 22 Jun 2024 17:39:41 +0200
+Subject: Keep using Debian's adduser defaults
+
+Bug: https://github.com/shadow-maint/shadow/issues/501
+Bug-Debian: https://bugs.debian.org/1004710
+Forwarded: not-needed
+
+Upstream's bbf4b79bc49fd1826eb41f6629669ef0b647267b commit
+in 4.9 merged those values from upstream's default configuration file
+which is not shipped in Debian.
+This patch keeps the program's compiled in defaults in sync with the
+configuration files shipped in Debian (debian/default/useradd).
+---
+ man/useradd.8.xml | 2 +-
+ src/useradd.c     | 4 ++--
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/man/useradd.8.xml b/man/useradd.8.xml
+index 001e7d1..4888100 100644
+--- a/man/useradd.8.xml
++++ b/man/useradd.8.xml
+@@ -248,7 +248,7 @@
+ 	    command line), useradd will set the primary group of the new
+ 	    user to the value specified by the <option>GROUP</option>
+ 	    variable in <filename>/etc/default/useradd</filename>, or
+-	    1000 by default.
++	    100 by default.
+ 	  </para>
+ 	</listitem>
+       </varlistentry>
+diff --git a/src/useradd.c b/src/useradd.c
+index 891fd14..7b150ea 100644
+--- a/src/useradd.c
++++ b/src/useradd.c
+@@ -96,14 +96,14 @@ static const char Prog[] = "useradd";
+ /*
+  * These defaults are used if there is no defaults file.
+  */
+-static gid_t def_group = 1000;
++static gid_t def_group = 100;
+ static const char *def_groups = "";
+ static const char *def_gname = "other";
+ static const char *def_home = "/home";
+ static const char *def_shell = "/bin/bash";
+ static const char *def_template = SKEL_DIR;
+ static const char *def_usrtemplate = USRSKELDIR;
+-static const char *def_create_mail_spool = "yes";
++static const char *def_create_mail_spool = "no";
+ static const char *def_log_init = "yes";
+ 
+ static long def_inactive = -1;

debian/patches/debian/Recommend-using-adduser-and-deluser.patch

@@ -0,0 +1,46 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sat, 22 Jun 2024 17:39:41 +0200
+Subject: Recommend using adduser and deluser
+
+Fixes: #406046
+
+Status wrt upstream: Debian specific patch.
+---
+ man/useradd.8.xml | 6 ++++++
+ man/userdel.8.xml | 6 ++++++
+ 2 files changed, 12 insertions(+)
+
+diff --git a/man/useradd.8.xml b/man/useradd.8.xml
+index 4888100..17987a6 100644
+--- a/man/useradd.8.xml
++++ b/man/useradd.8.xml
+@@ -82,6 +82,12 @@
+ 
+   <refsect1 id='description'>
+     <title>DESCRIPTION</title>
++      <para>
++	<command>useradd</command> is a low level utility for adding
++	users.  On Debian, administrators should usually use
++	<citerefentry><refentrytitle>adduser</refentrytitle>
++	<manvolnum>8</manvolnum></citerefentry> instead.
++      </para>
+       <para>
+ 	When invoked without the <option>-D</option> option, the
+ 	<command>useradd</command> command creates a new user account using
+diff --git a/man/userdel.8.xml b/man/userdel.8.xml
+index 32851f1..4373cd8 100644
+--- a/man/userdel.8.xml
++++ b/man/userdel.8.xml
+@@ -58,6 +58,12 @@
+ 
+   <refsect1 id='description'>
+     <title>DESCRIPTION</title>
++    <para>
++      <command>userdel</command> is a low level utility for removing
++      users.  On Debian, administrators should usually use
++      <citerefentry><refentrytitle>deluser</refentrytitle>
++      <manvolnum>8</manvolnum></citerefentry> instead.
++    </para>
+     <para>
+       The <command>userdel</command> command modifies the system account
+       files, deleting all entries that refer to the user name <emphasis

debian/patches/debian/Relax-usernames-groupnames-checking.patch

@@ -0,0 +1,120 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sat, 22 Jun 2024 17:39:41 +0200
+Subject: Relax usernames/groupnames checking
+
+Allows any non-empty user/grounames that don't contain ':', ',', '\\' or
+'\n' characters and don't start with '-', '+', or '~'. This patch is
+more restrictive than original Karl's version. closes: #264879 Also
+closes: #377844
+
+Comments from Karl Ramm (shadow 1:4.0.3-9, 20 Aug 2003 02:06:50 -0400):
+
+I can't come up with a good justification as to why characters other
+than ':'s and '\0's should be disallowed in group and usernames (other
+than '-' as the leading character).  Thus, the maintenance tools don't
+anymore.  closes: #79682, #166798, #171179
+
+Status wrt upstream: Debian specific. Not to be used upstream
+---
+ lib/chkname.c      | 39 +++++++++++++++------------------------
+ man/groupadd.8.xml |  7 +++++++
+ man/useradd.8.xml  |  9 +++++++++
+ 3 files changed, 31 insertions(+), 24 deletions(-)
+
+diff --git a/lib/chkname.c b/lib/chkname.c
+index 8bde7a2..95fbe10 100644
+--- a/lib/chkname.c
++++ b/lib/chkname.c
+@@ -60,24 +60,22 @@ is_valid_name(const char *name)
+ 	}
+ 
+ 	/*
+-         * User/group names must match BRE regex:
+-         *    [a-zA-Z0-9_.][a-zA-Z0-9_.-]*$\?
+-         *
+-         * as a non-POSIX, extension, allow "$" as the last char for
+-         * sake of Samba 3.x "add machine script"
+-         *
+-         * Also do not allow fully numeric names or just "." or "..".
+-         */
++	 * POSIX indicate that usernames are composed of characters from the
++	 * portable filename character set [A-Za-z0-9._-], and that the hyphen
++	 * should not be used as the first character of a portable user name.
++	 *
++	 * Allow more relaxed user/group names in Debian -- ^[^-~+:,\\\s][^:,\\\s]*$
++	 *
++	 * Also do not allow fully numeric names or just "." or "..".
++	 */
+ 	int numeric;
+ 
+-	if ('\0' == *name ||
+-	    ('.' == *name && (('.' == name[1] && '\0' == name[2]) ||
+-			      '\0' == name[1])) ||
+-	    !((*name >= 'a' && *name <= 'z') ||
+-	      (*name >= 'A' && *name <= 'Z') ||
+-	      (*name >= '0' && *name <= '9') ||
+-	      *name == '_' ||
+-	      *name == '.'))
++	if (('\0' == *name) ||
++		('.' == *name && (('.' == name[1] && '\0' == name[2]) ||
++						  '\0' == name[1])) ||
++		('-'  == *name) ||
++		('~'  == *name) ||
++		('+'  == *name))
+ 	{
+ 		errno = EINVAL;
+ 		return false;
+@@ -86,14 +84,7 @@ is_valid_name(const char *name)
+ 	numeric = isdigit(*name);
+ 
+ 	while ('\0' != *++name) {
+-		if (!((*name >= 'a' && *name <= 'z') ||
+-		      (*name >= 'A' && *name <= 'Z') ||
+-		      (*name >= '0' && *name <= '9') ||
+-		      *name == '_' ||
+-		      *name == '.' ||
+-		      *name == '-' ||
+-		      (*name == '$' && name[1] == '\0')
+-		     ))
++		if ((':' == *name) || (',' == *name) || ('\\' == *name) || isspace(*name))
+ 		{
+ 			errno = EINVAL;
+ 			return false;
+diff --git a/man/groupadd.8.xml b/man/groupadd.8.xml
+index 9abf159..5aa7998 100644
+--- a/man/groupadd.8.xml
++++ b/man/groupadd.8.xml
+@@ -71,6 +71,13 @@
+        Fully numeric groupnames and groupnames . or .. are
+        also disallowed.
+      </para>
++     <para>
++       On Debian, the only constraints are that groupnames must neither start
++       with a dash ('-') nor plus ('+') nor tilde ('~') nor contain a
++       colon (':'), a comma (','), or a whitespace (space:' ',
++       end of line: '\n', tabulation: '\t', etc.).
++       They also cannot be purely numeric or the strings "." or "..".
++     </para>
+      <para>
+        Groupnames may only be up to &GROUP_NAME_MAX_LENGTH; characters long.
+      </para>
+diff --git a/man/useradd.8.xml b/man/useradd.8.xml
+index 17987a6..e164940 100644
+--- a/man/useradd.8.xml
++++ b/man/useradd.8.xml
+@@ -735,6 +735,15 @@
+     <para>
+       Usernames may only be up to 256 characters long.
+     </para>
++    <para>
++      On Debian, the only constraints are that usernames must neither start
++      with a dash ('-') nor plus ('+') nor tilde ('~') nor contain a
++      colon (':'), a comma (','), or a whitespace (space: ' ',
++      end of line: '\n', tabulation: '\t', etc.). Note that using a slash
++      ('/') may break the default algorithm for the definition of the
++      user's home directory.
++      They also cannot be purely numeric or the strings "." or "..".
++    </para>
+   </refsect1>
+ 
+   <refsect1 id='configuration'>

debian/patches/debian/Set-group-and-mode-for-g-shadow-files.patch

@@ -0,0 +1,75 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sat, 22 Jun 2024 17:39:41 +0200
+Subject: Set group and mode for [g]shadow files
+
+Set group 'shadow' and mode 0400.
+
+Fixes: #166793
+---
+ lib/commonio.c | 12 ++++++++++++
+ lib/sgroupio.c |  2 +-
+ lib/shadowio.c |  2 +-
+ 3 files changed, 14 insertions(+), 2 deletions(-)
+
+diff --git a/lib/commonio.c b/lib/commonio.c
+index 4d83e83..51e6300 100644
+--- a/lib/commonio.c
++++ b/lib/commonio.c
+@@ -21,6 +21,7 @@
+ #include <sys/stat.h>
+ #include <stdlib.h>
+ #include <utime.h>
++#include <grp.h>
+ 
+ #include "alloc/malloc.h"
+ #include "alloc/reallocf.h"
+@@ -953,12 +954,23 @@ int commonio_close (struct commonio_db *db)
+ 		if (errors != 0)
+ 			goto fail;
+ 	} else {
++		struct group *grp;
+ 		/*
+ 		 * Default permissions for new [g]shadow files.
+ 		 */
+ 		sb.st_mode = db->st_mode;
+ 		sb.st_uid = db->st_uid;
+ 		sb.st_gid = db->st_gid;
++
++		/*
++		 * Try to retrieve the shadow's GID, and fall back to GID 0.
++		 */
++		if (sb.st_gid == 0) {
++			if ((grp = getgrnam("shadow")) != NULL)
++				sb.st_gid = grp->gr_gid;
++			else
++				sb.st_gid = 0;
++		}
+ 	}
+ 
+ 	if (SNPRINTF(buf, "%s+", db->filename) == -1)
+diff --git a/lib/sgroupio.c b/lib/sgroupio.c
+index acb140d..6ffccd1 100644
+--- a/lib/sgroupio.c
++++ b/lib/sgroupio.c
+@@ -210,7 +210,7 @@ static struct commonio_db gshadow_db = {
+ #ifdef WITH_SELINUX
+ 	NULL,			/* scontext */
+ #endif
+-	0400,                   /* st_mode */
++	0440,                   /* st_mode */
+ 	0,                      /* st_uid */
+ 	0,                      /* st_gid */
+ 	NULL,			/* head */
+diff --git a/lib/shadowio.c b/lib/shadowio.c
+index d2c3b47..53dac0b 100644
+--- a/lib/shadowio.c
++++ b/lib/shadowio.c
+@@ -85,7 +85,7 @@ static struct commonio_db shadow_db = {
+ #ifdef WITH_SELINUX
+ 	NULL,			/* scontext */
+ #endif				/* WITH_SELINUX */
+-	0400,                   /* st_mode */
++	0440,                   /* st_mode */
+ 	0,                      /* st_uid */
+ 	0,                      /* st_gid */
+ 	NULL,			/* head */

debian/patches/debian/Stop-building-programs-we-do-not-install.patch

@@ -0,0 +1,566 @@
+From: Chris Hofstaedtler <zeha@debian.org>
+Date: Tue, 6 Aug 2024 00:27:13 +0200
+Subject: Stop building programs we do not install
+
+---
+ man/Makefile.am       | 16 ----------------
+ man/cs/Makefile.am    |  9 ---------
+ man/da/Makefile.am    |  3 ---
+ man/de/Makefile.am    | 10 ----------
+ man/fr/Makefile.am    | 10 ----------
+ man/hu/Makefile.am    |  3 ---
+ man/id/Makefile.am    |  1 -
+ man/it/Makefile.am    | 10 ----------
+ man/ja/Makefile.am    |  8 --------
+ man/ko/Makefile.am    |  2 --
+ man/pl/Makefile.am    |  6 ------
+ man/ru/Makefile.am    |  9 ---------
+ man/sv/Makefile.am    |  8 --------
+ man/tr/Makefile.am    |  2 --
+ man/uk/Makefile.am    |  9 ---------
+ man/zh_CN/Makefile.am | 10 ----------
+ man/zh_TW/Makefile.am |  2 --
+ src/Makefile.am       |  7 +++----
+ 18 files changed, 3 insertions(+), 122 deletions(-)
+
+diff --git a/man/Makefile.am b/man/Makefile.am
+index 6f9dcd9..49dfc3d 100644
+--- a/man/Makefile.am
++++ b/man/Makefile.am
+@@ -13,8 +13,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+@@ -25,22 +23,16 @@ man_MANS = \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+@@ -82,8 +74,6 @@ man_XMANS = \
+ 	chpasswd.8.xml \
+ 	chsh.1.xml \
+ 	expiry.1.xml \
+-	faillog.5.xml \
+-	faillog.8.xml \
+ 	getsubids.1.xml \
+ 	gpasswd.1.xml \
+ 	groupadd.8.xml \
+@@ -96,12 +86,9 @@ man_XMANS = \
+ 	login.1.xml \
+ 	login.access.5.xml \
+ 	login.defs.5.xml \
+-	logoutd.8.xml \
+ 	newgidmap.1.xml \
+-	newgrp.1.xml \
+ 	newuidmap.1.xml \
+ 	newusers.8.xml \
+-	nologin.8.xml \
+ 	passwd.1.xml \
+ 	passwd.5.xml \
+ 	porttime.5.xml \
+@@ -110,9 +97,6 @@ man_XMANS = \
+ 	shadowconfig.8.xml \
+ 	shadow.3.xml \
+ 	shadow.5.xml \
+-	sg.1.xml \
+-	su.1.xml \
+-	suauth.5.xml \
+ 	subgid.5.xml \
+ 	subuid.5.xml \
+ 	useradd.8.xml \
+diff --git a/man/cs/Makefile.am b/man/cs/Makefile.am
+index 45aec38..e1f9f87 100644
+--- a/man/cs/Makefile.am
++++ b/man/cs/Makefile.am
+@@ -3,25 +3,16 @@ mandir = @mandir@/cs
+ 
+ man_MANS = \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man5/gshadow.5 \
+-	man8/nologin.8 \
+ 	man5/passwd.5 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+ 	man8/vipw.8
+ 
+ if ENABLE_LASTLOG
+ man_MANS += man8/lastlog.8
+ endif
+-
+-EXTRA_DIST = $(man_MANS) \
+-	man8/groupmems.8 \
+-	man8/logoutd.8
+-
+diff --git a/man/da/Makefile.am b/man/da/Makefile.am
+index c61b787..12234cb 100644
+--- a/man/da/Makefile.am
++++ b/man/da/Makefile.am
+@@ -6,10 +6,7 @@ man_MANS = \
+ 	man1/chfn.1 \
+ 	man8/groupdel.8 \
+ 	man5/gshadow.5 \
+-	man8/logoutd.8 \
+ 	man1/newgrp.1 \
+-	man8/nologin.8 \
+-	man1/sg.1 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+ 
+diff --git a/man/de/Makefile.am b/man/de/Makefile.am
+index d3a6d6c..59602aa 100644
+--- a/man/de/Makefile.am
++++ b/man/de/Makefile.am
+@@ -8,34 +8,24 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/fr/Makefile.am b/man/fr/Makefile.am
+index e175a15..d4cb276 100644
+--- a/man/fr/Makefile.am
++++ b/man/fr/Makefile.am
+@@ -8,35 +8,25 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/hu/Makefile.am b/man/hu/Makefile.am
+index 6bf68e8..2930da3 100644
+--- a/man/hu/Makefile.am
++++ b/man/hu/Makefile.am
+@@ -4,11 +4,8 @@ mandir = @mandir@/hu
+ man_MANS = \
+ 	man1/chsh.1 \
+ 	man1/gpasswd.1 \
+-	man1/login.1 \
+-	man1/newgrp.1 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+-	man1/sg.1 \
+ 	man1/su.1
+ 
+ if ENABLE_LASTLOG
+diff --git a/man/id/Makefile.am b/man/id/Makefile.am
+index 21f3dbe..566fa8b 100644
+--- a/man/id/Makefile.am
++++ b/man/id/Makefile.am
+@@ -3,7 +3,6 @@ mandir = @mandir@/id
+ 
+ man_MANS = \
+ 	man1/chsh.1 \
+-	man1/login.1 \
+ 	man8/useradd.8
+ 
+ EXTRA_DIST = $(man_MANS)
+diff --git a/man/it/Makefile.am b/man/it/Makefile.am
+index 736576c..3312232 100644
+--- a/man/it/Makefile.am
++++ b/man/it/Makefile.am
+@@ -8,34 +8,24 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/ja/Makefile.am b/man/ja/Makefile.am
+index b9f1df0..07fa208 100644
+--- a/man/ja/Makefile.am
++++ b/man/ja/Makefile.am
+@@ -7,8 +7,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+@@ -16,10 +14,7 @@ man_MANS = \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+@@ -27,10 +22,7 @@ man_MANS = \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/ko/Makefile.am b/man/ko/Makefile.am
+index 4f73651..0f17a17 100644
+--- a/man/ko/Makefile.am
++++ b/man/ko/Makefile.am
+@@ -4,9 +4,7 @@ mandir = @mandir@/ko
+ man_MANS = \
+ 	man1/chfn.1 \
+ 	man1/chsh.1 \
+-	man1/login.1 \
+ 	man5/passwd.5 \
+-	man1/su.1 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+ # newgrp.1 must be updated
+diff --git a/man/pl/Makefile.am b/man/pl/Makefile.am
+index 04093ec..ba91f47 100644
+--- a/man/pl/Makefile.am
++++ b/man/pl/Makefile.am
+@@ -6,17 +6,11 @@ man_MANS = \
+ 	man1/chage.1 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+-	man1/sg.1 \
+ 	man8/shadowconfig.8 \
+ 	man3/shadow.3 \
+ 	man8/userdel.8 \
+diff --git a/man/ru/Makefile.am b/man/ru/Makefile.am
+index 845a603..9afcb22 100644
+--- a/man/ru/Makefile.am
++++ b/man/ru/Makefile.am
+@@ -8,22 +8,16 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+ 	man8/nologin.8 \
+ 	man1/passwd.1 \
+@@ -31,11 +25,8 @@ man_MANS = \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/sv/Makefile.am b/man/sv/Makefile.am
+index 1918af7..d572c36 100644
+--- a/man/sv/Makefile.am
++++ b/man/sv/Makefile.am
+@@ -5,24 +5,16 @@ man_MANS = \
+ 	man1/chage.1 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man5/gshadow.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+-	man5/suauth.5 \
+ 	man8/userdel.8 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+diff --git a/man/tr/Makefile.am b/man/tr/Makefile.am
+index 8d8b916..8b2aa2d 100644
+--- a/man/tr/Makefile.am
++++ b/man/tr/Makefile.am
+@@ -6,11 +6,9 @@ man_MANS = \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+-	man1/login.1 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8
+diff --git a/man/uk/Makefile.am b/man/uk/Makefile.am
+index a0f106d..f069eea 100644
+--- a/man/uk/Makefile.am
++++ b/man/uk/Makefile.am
+@@ -8,34 +8,25 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+ 	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/zh_CN/Makefile.am b/man/zh_CN/Makefile.am
+index 59d1072..9402a9e 100644
+--- a/man/zh_CN/Makefile.am
++++ b/man/zh_CN/Makefile.am
+@@ -8,34 +8,24 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+-	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/zh_TW/Makefile.am b/man/zh_TW/Makefile.am
+index c36ed2c..6fb6a15 100644
+--- a/man/zh_TW/Makefile.am
++++ b/man/zh_TW/Makefile.am
+@@ -5,12 +5,10 @@ man_MANS = \
+ 	man1/chfn.1 \
+ 	man1/chsh.1 \
+ 	man8/chpasswd.8 \
+-	man1/newgrp.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+ 	man5/passwd.5 \
+-	man1/su.1 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8
+diff --git a/src/Makefile.am b/src/Makefile.am
+index d4e6f3a..78722ad 100644
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -26,8 +26,8 @@ AM_CFLAGS = $(LIBBSD_CFLAGS)
+ # and installation would be much simpler (just two directories,
+ # $prefix/bin and $prefix/sbin, no install-data hacks...)
+ 
+-bin_PROGRAMS   = login
+-sbin_PROGRAMS  = nologin
++bin_PROGRAMS   =
++sbin_PROGRAMS  =
+ ubin_PROGRAMS  = faillog chage chfn chsh expiry gpasswd newgrp passwd
+ if ENABLE_SUBIDS
+ ubin_PROGRAMS += newgidmap newuidmap
+@@ -48,7 +48,6 @@ usbin_PROGRAMS = \
+ 	grpck \
+ 	grpconv \
+ 	grpunconv \
+-	logoutd \
+ 	newusers \
+ 	pwck \
+ 	pwconv \
+@@ -59,7 +58,7 @@ usbin_PROGRAMS = \
+ 	vipw
+ 
+ # sulogin from sysvinit
+-noinst_PROGRAMS = sulogin
++noinst_PROGRAMS =
+ 
+ suidusbins     =
+ suidbins       =

debian/patches/debian/tests-disable-su.patch

@@ -0,0 +1,89 @@
+From: Serge Hallyn <serge@hallyn.com>
+Date: Thu, 27 Jun 2024 01:23:05 +0200
+Subject: upstream testsuite: disable su tests
+
+Debian uses su from util-linux, pointless/impossible to test shadow's su
+here.
+---
+ tests/run_some | 68 ----------------------------------------------------------
+ 1 file changed, 68 deletions(-)
+
+diff --git a/tests/run_some b/tests/run_some
+index c58f59b..46317eb 100755
+--- a/tests/run_some
++++ b/tests/run_some
+@@ -79,74 +79,6 @@ echo "-: test failed"
+ find "${build_path}" -name "*.gcda" -delete
+ # ignore the result of the first test.  ~magic~
+ run_test ./su/01/su_user.test ignore_failure
+-run_test ./su/01/su_user.test
+-run_test ./su/01/su_root.test
+-find "${build_path}" -name "*.gcda" -exec chmod a+rw {} \;
+-run_test ./su/02/env_FOO-options_--login
+-run_test ./su/02/env_FOO-options_--login_bash
+-run_test ./su/02/env_FOO-options_--preserve-environment
+-run_test ./su/02/env_FOO-options_--preserve-environment_bash
+-run_test ./su/02/env_FOO-options_-
+-run_test ./su/02/env_FOO-options_-_bash
+-run_test ./su/02/env_FOO-options_-l-m
+-run_test ./su/02/env_FOO-options_-l-m_bash
+-run_test ./su/02/env_FOO-options_-l
+-run_test ./su/02/env_FOO-options_-l_bash
+-run_test ./su/02/env_FOO-options_-m_bash
+-run_test ./su/02/env_FOO-options_-m
+-run_test ./su/02/env_FOO-options_-p
+-run_test ./su/02/env_FOO-options_-p_bash
+-run_test ./su/02/env_FOO-options__bash
+-run_test ./su/02/env_FOO-options_
+-run_test ./su/02/env_FOO-options_-p-
+-run_test ./su/02/env_FOO-options_-p-_bash
+-run_test ./su/02/env_special-options_-l-p
+-run_test ./su/02/env_special-options_-l
+-run_test ./su/02/env_special-options_-l-p_bash
+-run_test ./su/02/env_special-options_-l_bash
+-run_test ./su/02/env_special-options_-p
+-run_test ./su/02/env_special-options_-p_bash
+-run_test ./su/02/env_special-options_
+-run_test ./su/02/env_special-options__bash
+-run_test ./su/02/env_special_root-options_-l-p
+-run_test ./su/02/env_special_root-options_-l-p_bash
+-run_test ./su/02/env_special_root-options_-l
+-run_test ./su/02/env_special_root-options_-l_bash
+-run_test ./su/02/env_special_root-options_-p
+-run_test ./su/02/env_special_root-options_-p_bash
+-run_test ./su/02/env_special_root-options_
+-run_test ./su/02/env_special_root-options__bash
+-run_test ./su/03/su_run_command01.test
+-run_test ./su/03/su_run_command02.test
+-run_test ./su/03/su_run_command03.test
+-run_test ./su/03/su_run_command04.test
+-run_test ./su/03/su_run_command05.test
+-run_test ./su/03/su_run_command06.test
+-run_test ./su/03/su_run_command07.test
+-run_test ./su/03/su_run_command08.test
+-run_test ./su/03/su_run_command09.test
+-run_test ./su/03/su_run_command10.test
+-run_test ./su/03/su_run_command11.test
+-run_test ./su/03/su_run_command12.test
+-run_test ./su/03/su_run_command13.test
+-run_test ./su/03/su_run_command14.test
+-run_test ./su/03/su_run_command15.test
+-run_test ./su/03/su_run_command16.test
+-run_test ./su/03/su_run_command17.test
+-run_test ./su/04/su_wrong_user.test
+-run_test ./su/04/su_user_wrong_passwd.test
+-run_test ./su/04/su_user_wrong_passwd_syslog.test
+-run_test ./su/05/su_user_wrong_passwd_syslog.test
+-run_test ./su/06/su_user_syslog.test
+-run_test ./su/07/su_user_syslog.test
+-run_test ./su/08/env_special-options_
+-run_test ./su/08/env_special_root-options_
+-run_test ./su/09/env_special-options_
+-run_test ./su/09/env_special_root-options_
+-run_test ./su/10_su_sulog_success/su.test
+-run_test ./su/11_su_sulog_failure/su.test
+-run_test ./su/12_su_child_failure/su.test
+-run_test ./su/13_su_child_success/su.test
+ run_test ./libsubid/01_list_ranges/list_ranges.test
+ run_test ./libsubid/02_get_subid_owners/get_subid_owners.test
+ run_test ./libsubid/03_add_remove/add_remove_subids.test

debian/patches/series

@@ -0,0 +1,10 @@
+debian/Set-group-and-mode-for-g-shadow-files.patch
+debian/Keep-using-Debian-adduser-defaults.patch
+debian/Document-the-shadowconfig-utility.patch
+debian/Recommend-using-adduser-and-deluser.patch
+debian/Relax-usernames-groupnames-checking.patch
+debian/tests-disable-su.patch
+debian/Adapt-login.defs-for-Debian.patch
+debian/Define-LOGIN_NAME_MAX-on-HURD.patch
+debian/Stop-building-programs-we-do-not-install.patch
+upstream/a015e919834c90b99947829c6c823f7fe93a8097-E_BAD_NAME.patch

debian/patches/upstream/a015e919834c90b99947829c6c823f7fe93a8097-E_BAD_NAME.patch

@@ -0,0 +1,38 @@
+From: Alejandro Colomar <alx@kernel.org>
+Date: Thu, 5 Dec 2024 17:38:54 +0100
+Subject: [PATCH] src/useradd.c: E_BAD_NAME: Use a different error code for
+ bad login names
+
+Wrappers like adduser(8) want to do their own stuff if the login name is
+bad.  For that, they need to be able to differentiate such an error.
+
+Closes: <https://github.com/shadow-maint/shadow/issues/1103>
+Suggested-by: Chris Hofstaedtler <zeha@debian.org>
+Cc: Marc 'Zugschlus' Haber <mh+githubvisible@zugschlus.de>
+Signed-off-by: Alejandro Colomar <alx@kernel.org>
+Bug-Debian: 1074306
+---
+ src/useradd.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/src/useradd.c b/src/useradd.c
+index 7b150ea..00c86f6 100644
+--- a/src/useradd.c
++++ b/src/useradd.c
+@@ -201,6 +201,7 @@ static bool home_added = false;
+ #define E_SUB_UID_UPDATE 16	/* can't update the subordinate uid file */
+ #define E_SUB_GID_UPDATE 18	/* can't update the subordinate gid file */
+ #endif				/* ENABLE_SUBIDS */
++#define E_BAD_NAME	19	/* Bad login name */
+ 
+ #define DGROUP			"GROUP"
+ #define DGROUPS			"GROUPS"
+@@ -1549,7 +1550,7 @@ static void process_flags (int argc, char **argv)
+ 			              user_name, AUDIT_NO_ID,
+ 			              SHADOW_AUDIT_FAILURE);
+ #endif
+-			exit (E_BAD_ARG);
++			exit (E_BAD_NAME);
+ 		}
+ 		if (!dflg) {
+ 			char  *uh;

debian/rules

@@ -0,0 +1,56 @@
+#!/usr/bin/make -f
+# -*- mode: makefile; coding: utf-8 -*-
+
+# Enable PIE, BINDNOW, and possible future flags.
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/buildflags.mk
+include /usr/share/debhelper/dh_package_notes/package-notes.mk
+
+# Adds extra options when calling the configure script:
+DEB_CONFIGURE_EXTRA_FLAGS := \
+	--mandir=/usr/share/man \
+	--with-libpam \
+	--with-yescrypt \
+	--enable-shadowgrp \
+	--enable-subordinate-ids \
+	--enable-lastlog=no \
+	--enable-man \
+	--disable-account-tools-setuid \
+	--with-group-name-max-length=32 \
+	--with-acl \
+	--with-attr \
+	--without-su \
+	--without-tcb \
+
+
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+DEB_CONFIGURE_EXTRA_FLAGS += --with-audit
+DEB_CONFIGURE_EXTRA_FLAGS += --with-btrfs
+endif
+
+ifneq ($(filter nodoc,$(DEB_BUILD_PROFILES)),)
+DEB_CONFIGURE_EXTRA_FLAGS += --disable-man
+endif
+
+DEB_CONFIGURE_EXTRA_FLAGS += SHELL=/bin/sh
+
+# Set the default editor for vipw/vigr
+CFLAGS += -DDEFAULT_EDITOR="\"sensible-editor\""
+
+%:
+	dh $@
+
+override_dh_auto_configure:
+	dh_auto_configure -- $(DEB_CONFIGURE_EXTRA_FLAGS)
+
+override_dh_installpam:
+	# Distribute the pam.d files; unless for the commands with disabled PAM
+	# support
+	dh_installpam -p passwd --name=passwd
+	dh_installpam -p passwd --name=chfn
+	dh_installpam -p passwd --name=chsh
+	dh_installpam -p passwd --name=chpasswd
+	dh_installpam -p passwd --name=newusers
+

debian/salsa-ci.yml

@@ -0,0 +1,40 @@
+---
+include: https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
+
+extract-source:
+  extends: .provisioning-extract-source
+
+variables:
+  RELEASE: 'unstable'
+
+build:
+  extends: .build-package
+
+test-build-any:
+  extends: .test-build-package-any
+
+test-build-all:
+  extends: .test-build-package-all
+
+lintian:
+  extends: .test-lintian
+
+autopkgtest:
+  extends: .test-autopkgtest
+
+blhc:
+  extends: .test-blhc
+
+reprotest:
+  extends: .test-reprotest
+
+variables:
+  SALSA_CI_ENABLE_BUILD_PACKAGE_PROFILES: 1
+
+test-build-profiles:
+  extends: .test-build-package-profiles
+  parallel:
+    matrix:
+      - BUILD_PROFILES: nocheck
+      - BUILD_PROFILES: nodoc
+

debian/shadowconfig

@@ -0,0 +1,70 @@
+#!/bin/sh
+# turn shadow passwords on or off on a Debian system
+
+set -e
+
+shadowon () {
+    set -e
+
+    if [ -n "$DPKG_ROOT" ] \
+        && cmp "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/usr/share/base-passwd/passwd.master" 2>/dev/null \
+        && cmp "${DPKG_ROOT}/etc/group" "${DPKG_ROOT}/usr/share/base-passwd/group.master" 2>/dev/null; then
+        # If dpkg is run with --force-script-chrootless and if /etc/passwd
+        # and /etc/group are unchanged, we avoid the chroot() call by manually
+        # processing the files. This produces bit-by-bit identical results
+        # compared to the normal case as shown by the CI setup at
+        # https://salsa.debian.org/helmutg/dpkg-root-demo/-/jobs
+        for f in passwd group; do
+            cp -a "${DPKG_ROOT}/etc/$f" "${DPKG_ROOT}/etc/$f-"
+        done
+        chmod 600 "${DPKG_ROOT}/etc/passwd-"
+        sed -i 's/^\([^:]\+\):\*:/\1:x:/' "${DPKG_ROOT}/etc/group" "${DPKG_ROOT}/etc/passwd"
+        [ -n "$SOURCE_DATE_EPOCH" ] && epoch=$SOURCE_DATE_EPOCH || epoch=$(date +%s)
+        sed "s/^\([^:]\+\):.*/\1:*:$((epoch/60/60/24)):0:99999:7:::/" "${DPKG_ROOT}/etc/passwd" > "${DPKG_ROOT}/etc/shadow"
+        sed "s/^\([^:]\+\):.*/\1:*::/" "${DPKG_ROOT}/etc/group" > "${DPKG_ROOT}/etc/gshadow"
+        touch "${DPKG_ROOT}/etc/.pwd.lock"
+        chmod 600 "${DPKG_ROOT}/etc/.pwd.lock"
+    else
+        pwck -q -r
+        grpck -r
+        pwconv
+        grpconv
+    fi
+    chown root:root "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/etc/group"
+    chmod 644 "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/etc/group"
+    chown root:shadow "${DPKG_ROOT}/etc/shadow" "${DPKG_ROOT}/etc/gshadow"
+    chmod 640 "${DPKG_ROOT}/etc/shadow" "${DPKG_ROOT}/etc/gshadow"
+}
+
+shadowoff () {
+    set -e
+    pwck -q -r
+    grpck -r
+    pwunconv
+    grpunconv
+    # sometimes the passwd perms get munged
+    chown root:root /etc/passwd /etc/group
+    chmod 644 /etc/passwd /etc/group
+}
+
+case "$1" in
+    "on")
+	if shadowon ; then
+	    echo Shadow passwords are now on.
+	else
+	    echo Please correct the error and rerun \`$0 on\'
+	    exit 1
+	fi
+	;;
+    "off")
+	if shadowoff ; then
+	    echo Shadow passwords are now off.
+	else
+	    echo Please correct the error and rerun \`$0 off\'
+	    exit 1
+	fi
+	;;
+     *)
+	echo Usage: $0 on \| off
+	;;
+esac

debian/shlibs.local

@@ -0,0 +1 @@
+deb: libsubid 5 libsubid5 (= ${binary:Version})

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/source/lintian-overrides

@@ -0,0 +1,6 @@
+# debputy does not need misc:Depends
+debhelper-but-no-misc-depends libsubid-dev
+debhelper-but-no-misc-depends libsubid5
+debhelper-but-no-misc-depends login.defs
+debhelper-but-no-misc-depends passwd
+debhelper-but-no-misc-depends uidmap

debian/tests/control

@@ -0,0 +1,10 @@
+Tests: smoke
+Restrictions: needs-root, superficial
+
+Tests: upstream
+Depends:
+ expect,
+ procps,
+ @,
+ @builddeps@
+Restrictions: needs-root, build-needed, breaks-testbed, allow-stderr, isolation-machine

debian/tests/smoke

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set -e
+
+echo "Adding an user works"
+useradd shadow-test-user
+grep '^shadow-test-user:x:' /etc/passwd
+grep '^shadow-test-user:!:' /etc/shadow
+
+echo "Removing an user works"
+userdel shadow-test-user
+! grep 'shadow-test-user' /etc/passwd
+! grep 'shadow-test-user' /etc/shadow

debian/tests/upstream

@@ -0,0 +1,15 @@
+#!/bin/sh
+useradd ubuntu
+
+export BUILD_BASE_DIR=$(pwd)
+
+cd tests
+
+cleanup() {
+  cp testsuite.log $AUTOPKGTEST_ARTIFACTS/
+  cat testsuite.log
+}
+
+trap cleanup TERM EXIT
+
+./run_some 2>&1

debian/uidmap.install

@@ -0,0 +1,3 @@
+bin/getsubids usr/bin
+usr/bin/newgidmap
+usr/bin/newuidmap

debian/uidmap.lintian-overrides

@@ -0,0 +1,2 @@
+uidmap: elevated-privileges 4755 root/root [usr/bin/newgidmap]
+uidmap: elevated-privileges 4755 root/root [usr/bin/newuidmap]

debian/uidmap.manpages

@@ -0,0 +1,5 @@
+usr/share/man/*/man1/newgidmap.1
+usr/share/man/*/man1/newuidmap.1
+usr/share/man/man1/getsubids.1
+usr/share/man/man1/newgidmap.1
+usr/share/man/man1/newuidmap.1

debian/upstream/metadata

@@ -0,0 +1,4 @@
+---
+Bug-Database: https://github.com/shadow-maint/shadow/issues
+Bug-Submit: https://github.com/shadow-maint/shadow/issues/new
+Repository-Browse: https://github.com/shadow-maint/shadow

debian/watch

@@ -0,0 +1,7 @@
+version=4
+opts=downloadurlmangle=s/archive\/refs\/tags\/(.*)\.tar\.gz/releases\/download\/$1\/@PACKAGE@-$1\.tar\.xz/,\
+    pgpsigurlmangle=s/$/.asc/,\
+    versionmangle=s/-(alpha|beta|rc)/~$1/,\
+    dversionmangle=s/\+dfsg1//,repacksuffix=+dfsg1 \
+    https://github.com/shadow-maint/@PACKAGE@/tags \
+    /shadow-maint/@PACKAGE@/archive/refs/tags/([^v].*)\.tar\.gz

doc/HOWTO

@@ -471,12 +471,12 @@
 
   The Shadow Suite contains replacement programs for:
 
-  su, login, passwd, newgrp, chfn, chsh, and id
+  su, login, passwd, newgrp, chfn, chsh
 
   The package also contains the new programs:
 
   chage, newusers, dpasswd, gpasswd, useradd, userdel, usermod,
-  groupadd, groupdel, groupmod, groups, pwck, grpck, lastlog, pwconv,
+  groupadd, groupdel, groupmod, pwck, grpck, lastlog, pwconv,
   and pwunconv
 
   Additionally, the library: libshadow.a is included for writing and/or
@@ -586,8 +586,6 @@
 
   ·  /usr/bin/chsh
 
-  ·  /usr/bin/id
-
   The BETA package has a save target in the Makefile, but it's commented
   out because different distributions place the programs in different
   places.
@@ -637,8 +635,6 @@
 
   ·  /usr/man/man1/chsh.1.gz
 
-  ·  /usr/man/man1/id.1.gz
-
   ·  /usr/man/man1/login.1.gz
 
   ·  /usr/man/man1/passwd.1.gz
@@ -1377,7 +1373,7 @@
   users or changing the group password, the /etc/gshadow file will be
   changed.
 
-  The programs groups, groupadd, groupmod, and groupdel are provided as
+  The programs groupadd, groupmod, and groupdel are provided as
   part of the Shadow Suite to modify groups.
 
   The format of the /etc/group file is as follows:

doc/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/Makefile.in

@@ -250,7 +250,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/pam.d/Makefile.in

@@ -193,7 +193,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/shadow-maint/Makefile.in

@@ -158,7 +158,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

lib/Makefile.am

@@ -29,16 +29,48 @@ libshadow_la_SOURCES = \
 	age.c \
 	agetpass.c \
 	agetpass.h \
-	alloc.c \
-	alloc.h \
-	atoi/a2i.c \
-	atoi/a2i.h \
-	atoi/str2i.c \
-	atoi/str2i.h \
-	atoi/strtoi.c \
-	atoi/strtoi.h \
-	atoi/strtou_noneg.c \
-	atoi/strtou_noneg.h \
+	alloc/calloc.c \
+	alloc/calloc.h \
+	alloc/malloc.c \
+	alloc/malloc.h \
+	alloc/realloc.c \
+	alloc/realloc.h \
+	alloc/reallocf.c \
+	alloc/reallocf.h \
+	alloc/x/xcalloc.c \
+	alloc/x/xcalloc.h \
+	alloc/x/xmalloc.c \
+	alloc/x/xmalloc.h \
+	alloc/x/xrealloc.c \
+	alloc/x/xrealloc.h \
+	atoi/a2i/a2i.c \
+	atoi/a2i/a2i.h \
+	atoi/a2i/a2s.c \
+	atoi/a2i/a2s.h \
+	atoi/a2i/a2s_c.c \
+	atoi/a2i/a2s_c.h \
+	atoi/a2i/a2s_nc.c \
+	atoi/a2i/a2s_nc.h \
+	atoi/a2i/a2u.c \
+	atoi/a2i/a2u.h \
+	atoi/a2i/a2u_c.c \
+	atoi/a2i/a2u_c.h \
+	atoi/a2i/a2u_nc.c \
+	atoi/a2i/a2u_nc.h \
+	atoi/getnum.c \
+	atoi/getnum.h \
+	atoi/str2i/str2i.c \
+	atoi/str2i/str2i.h \
+	atoi/str2i/str2s.c \
+	atoi/str2i/str2s.h \
+	atoi/str2i/str2u.c \
+	atoi/str2i/str2u.h \
+	atoi/strtoi/strtoi.c \
+	atoi/strtoi/strtoi.h \
+	atoi/strtoi/strtou.c \
+	atoi/strtoi/strtou.h \
+	atoi/strtoi/strtou_noneg.c \
+	atoi/strtoi/strtou_noneg.h \
 	attr.h \
 	audit_help.c \
 	basename.c \
@@ -71,9 +103,11 @@ libshadow_la_SOURCES = \
 	find_new_sub_gids.c \
 	find_new_sub_uids.c \
 	fputsx.c \
-	get_gid.c \
+	fs/readlink/areadlink.c \
+	fs/readlink/areadlink.h \
+	fs/readlink/readlinknul.c \
+	fs/readlink/readlinknul.h \
 	get_pid.c \
-	get_uid.c \
 	getdate.h \
 	getdate.y \
 	getdef.c \
@@ -94,8 +128,6 @@ libshadow_la_SOURCES = \
 	lockpw.c \
 	loginprompt.c \
 	mail.c \
-	memzero.c \
-	memzero.h \
 	motd.c \
 	must_be.h \
 	myname.c \
@@ -119,7 +151,6 @@ libshadow_la_SOURCES = \
 	pwdcheck.c \
 	pwmem.c \
 	remove_tree.c \
-	rlogin.c \
 	root_flag.c \
 	run_part.h \
 	run_part.c \
@@ -145,18 +176,42 @@ libshadow_la_SOURCES = \
 	spawn.c \
 	sssd.c \
 	sssd.h \
-	string/sprintf.c \
-	string/sprintf.h \
-	string/stpecpy.c \
-	string/stpecpy.h \
-	string/stpeprintf.c \
-	string/stpeprintf.h \
+	string/memset/memzero.c \
+	string/memset/memzero.h \
+	string/sprintf/snprintf.c \
+	string/sprintf/snprintf.h \
+	string/sprintf/stpeprintf.c \
+	string/sprintf/stpeprintf.h \
+	string/sprintf/xasprintf.c \
+	string/sprintf/xasprintf.h \
+	string/strchr/strchrcnt.c \
+	string/strchr/strchrcnt.h \
+	string/strchr/stpspn.c \
+	string/strchr/stpspn.h \
+	string/strchr/strnul.c \
+	string/strchr/strnul.h \
+	string/strchr/strrspn.c \
+	string/strchr/strrspn.h \
+	string/strcmp/streq.c \
+	string/strcmp/streq.h \
+	string/strcpy/stpecpy.c \
+	string/strcpy/stpecpy.h \
+	string/strcpy/strncat.c \
+	string/strcpy/strncat.h \
+	string/strcpy/strncpy.c \
+	string/strcpy/strncpy.h \
+	string/strcpy/strtcpy.c \
+	string/strcpy/strtcpy.h \
+	string/strdup/strndupa.c \
+	string/strdup/strndupa.h \
+	string/strdup/xstrdup.c \
+	string/strdup/xstrdup.h \
+	string/strdup/xstrndup.c \
+	string/strdup/xstrndup.h \
 	string/strftime.c \
 	string/strftime.h \
-	string/strncpy.h \
-	string/strtcpy.c \
-	string/strtcpy.h \
-	string/zustr2stp.h \
+	string/strtok/stpsep.c \
+	string/strtok/stpsep.h \
 	strtoday.c \
 	sub.c \
 	subordinateio.h \
@@ -165,6 +220,7 @@ libshadow_la_SOURCES = \
 	time/day_to_str.c \
 	time/day_to_str.h \
 	ttytype.c \
+	typetraits.h \
 	tz.c \
 	ulimit.c \
 	user_busy.c \

lib/addgrps.c

@@ -14,28 +14,30 @@
 #include "prototypes.h"
 #include "defines.h"
 
-#include <stdio.h>
-#include <grp.h>
 #include <errno.h>
+#include <grp.h>
+#include <stdio.h>
+#include <string.h>
 
-#include "alloc.h"
+#include "alloc/malloc.h"
+#include "alloc/reallocf.h"
 #include "shadowlog.h"
 
 #ident "$Id$"
 
-#define SEP ",:"
 /*
  * Add groups with names from LIST (separated by commas or colons)
  * to the supplementary group set.  Silently ignore groups which are
- * already there.  Warning: uses strtok().
+ * already there.
  */
-int add_groups (const char *list)
+int
+add_groups(const char *list)
 {
 	GETGROUPS_T *grouplist;
 	size_t i;
 	int ngroups;
 	bool added;
-	char *token;
+	char *g, *p;
 	char buf[1024];
 	int ret;
 	FILE *shadow_logfd = log_get_logfd();
@@ -70,13 +72,13 @@ int add_groups (const char *list)
 	}
 
 	added = false;
-	for (token = strtok (buf, SEP); NULL != token; token = strtok (NULL, SEP)) {
+	p = buf;
+	while (NULL != (g = strsep(&p, ",:"))) {
 		struct group *grp;
 
-		grp = getgrnam (token); /* local, no need for xgetgrnam */
+		grp = getgrnam(g); /* local, no need for xgetgrnam */
 		if (NULL == grp) {
-			fprintf (shadow_logfd, _("Warning: unknown group %s\n"),
-				 token);
+			fprintf(shadow_logfd, _("Warning: unknown group %s\n"), g);
 			continue;
 		}
 

lib/agetpass.c

@@ -16,7 +16,7 @@
 
 #ident "$Id$"
 
-#include "alloc.h"
+#include "alloc/malloc.h"
 
 #if WITH_LIBBSD == 0
 #include "freezero.h"

lib/alloc.c

@@ -1,73 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 1990 - 1994, Julianne Frances Haugh
- * SPDX-FileCopyrightText: 1996 - 1998, Marek Michałkiewicz
- * SPDX-FileCopyrightText: 2003 - 2006, Tomasz Kłoczko
- * SPDX-FileCopyrightText: 2008       , Nicolas François
- * SPDX-FileCopyrightText: 2023       , Alejandro Colomar <alx@kernel.org>
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/* Replacements for malloc and strdup with error checking.  Too trivial
-   to be worth copyrighting :-).  I did that because a lot of code used
-   malloc and strdup without checking for NULL pointer, and I like some
-   message better than a core dump...  --marekm
-
-   Yeh, but.  Remember that bailing out might leave the system in some
-   bizarre state.  You really want to put in error checking, then add
-   some back-out failure recovery code. -- jfh */
-
-#include <config.h>
-
-#ident "$Id$"
-
-#include "alloc.h"
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdio.h>
-
-#include "defines.h"
-#include "prototypes.h"
-#include "shadowlog.h"
-
-
-extern inline void *xmalloc(size_t size);
-extern inline void *xmallocarray(size_t nmemb, size_t size);
-extern inline void *mallocarray(size_t nmemb, size_t size);
-extern inline void *reallocarrayf(void *p, size_t nmemb, size_t size);
-extern inline char *xstrdup(const char *str);
-
-
-void *
-xcalloc(size_t nmemb, size_t size)
-{
-	void  *p;
-
-	p = calloc(nmemb, size);
-	if (p == NULL)
-		goto x;
-
-	return p;
-
-x:
-	fprintf(log_get_logfd(), _("%s: %s\n"),
-	        log_get_progname(), strerror(errno));
-	exit(13);
-}
-
-
-void *
-xreallocarray(void *p, size_t nmemb, size_t size)
-{
-	p = reallocarrayf(p, nmemb, size);
-	if (p == NULL)
-		goto x;
-
-	return p;
-
-x:
-	fprintf(log_get_logfd(), _("%s: %s\n"),
-	        log_get_progname(), strerror(errno));
-	exit(13);
-}

lib/alloc.h

@@ -1,101 +0,0 @@
-// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
-// SPDX-License-Identifier: BSD-3-Clause
-
-
-#ifndef SHADOW_INCLUDE_LIB_MALLOC_H_
-#define SHADOW_INCLUDE_LIB_MALLOC_H_
-
-
-#include <config.h>
-
-#include <assert.h>
-#include <errno.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <stdlib.h>
-
-#include "attr.h"
-#include "defines.h"
-
-
-#define CALLOC(n, type)   ((type *) calloc(n, sizeof(type)))
-#define XCALLOC(n, type)  ((type *) xcalloc(n, sizeof(type)))
-#define MALLOC(n, type)   ((type *) mallocarray(n, sizeof(type)))
-#define XMALLOC(n, type)  ((type *) xmallocarray(n, sizeof(type)))
-
-#define REALLOC(ptr, n, type)                                                 \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) reallocarray(ptr, n, sizeof(type)))   \
-)
-
-#define REALLOCF(ptr, n, type)                                                \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) reallocarrayf(ptr, n, sizeof(type)))  \
-)
-
-#define XREALLOC(ptr, n, type)                                                \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) xreallocarray(ptr, n, sizeof(type)))  \
-)
-
-
-ATTR_MALLOC(free)
-inline void *xmalloc(size_t size);
-ATTR_MALLOC(free)
-inline void *xmallocarray(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline void *mallocarray(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline void *reallocarrayf(void *p, size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline char *xstrdup(const char *str);
-
-ATTR_MALLOC(free)
-void *xcalloc(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-void *xreallocarray(void *p, size_t nmemb, size_t size);
-
-
-inline void *
-xmalloc(size_t size)
-{
-	return xmallocarray(1, size);
-}
-
-
-inline void *
-xmallocarray(size_t nmemb, size_t size)
-{
-	return xreallocarray(NULL, nmemb, size);
-}
-
-
-inline void *
-mallocarray(size_t nmemb, size_t size)
-{
-	return reallocarray(NULL, nmemb, size);
-}
-
-
-inline void *
-reallocarrayf(void *p, size_t nmemb, size_t size)
-{
-	void  *q;
-
-	q = reallocarray(p, nmemb, size);
-
-	/* realloc(p, 0) is equivalent to free(p);  avoid double free.  */
-	if (q == NULL && nmemb != 0 && size != 0)
-		free(p);
-	return q;
-}
-
-
-inline char *
-xstrdup(const char *str)
-{
-	return strcpy(XMALLOC(strlen(str) + 1, char), str);
-}
-
-
-#endif  // include guard

lib/alloc/calloc.c

@@ -0,0 +1,11 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/calloc.h"

lib/alloc/calloc.h

@@ -0,0 +1,20 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_CALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_CALLOC_H_
+
+
+#include <config.h>
+
+#include <stdlib.h>
+
+
+#define CALLOC(n, type)                                                       \
+(                                                                             \
+	(type *) calloc(n, sizeof(type))                                      \
+)
+
+
+#endif  // include guard

lib/alloc/malloc.c

@@ -0,0 +1,16 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/malloc.h"
+
+#include <stddef.h>
+
+
+extern inline void *mallocarray(size_t nmemb, size_t size);

lib/alloc/malloc.h

@@ -0,0 +1,34 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_MALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_MALLOC_H_
+
+
+#include <config.h>
+
+#include <stdlib.h>
+
+#include "attr.h"
+
+
+#define MALLOC(n, type)                                                       \
+(                                                                             \
+	(type *) mallocarray(n, sizeof(type))                                 \
+)
+
+
+ATTR_ALLOC_SIZE(1, 2)
+ATTR_MALLOC(free)
+inline void *mallocarray(size_t nmemb, size_t size);
+
+
+inline void *
+mallocarray(size_t nmemb, size_t size)
+{
+	return reallocarray(NULL, nmemb, size);
+}
+
+
+#endif  // include guard

lib/alloc/realloc.c

@@ -0,0 +1,11 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/realloc.h"

lib/alloc/realloc.h

@@ -0,0 +1,20 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_REALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_REALLOC_H_
+
+
+#include <config.h>
+
+#include <stdlib.h>
+
+
+#define REALLOC(p, n, type)                                                   \
+(                                                                             \
+	_Generic(p, type *: (type *) reallocarray(p, (n) ?: 1, sizeof(type))) \
+)
+
+
+#endif  // include guard

lib/alloc/reallocf.c

@@ -0,0 +1,16 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/reallocf.h"
+
+#include <stddef.h>
+
+
+extern inline void *reallocarrayf(void *p, size_t nmemb, size_t size);

lib/alloc/reallocf.h

@@ -0,0 +1,41 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_REALLOCF_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_REALLOCF_H_
+
+
+#include <config.h>
+
+#include <stddef.h>
+#include <stdlib.h>
+
+#include "attr.h"
+
+
+#define REALLOCF(p, n, type)                                                  \
+(                                                                             \
+	_Generic(p, type *: (type *) reallocarrayf(p, (n) ?: 1, sizeof(type)))\
+)
+
+
+ATTR_ALLOC_SIZE(2, 3)
+ATTR_MALLOC(free)
+inline void *reallocarrayf(void *p, size_t nmemb, size_t size);
+
+
+inline void *
+reallocarrayf(void *p, size_t nmemb, size_t size)
+{
+	void  *q;
+
+	q = reallocarray(p, nmemb ?: 1, size ?: 1);
+
+	if (q == NULL)
+		free(p);
+	return q;
+}
+
+
+#endif  // include guard

lib/alloc/x/xcalloc.c

@@ -0,0 +1,36 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/x/xcalloc.h"
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "defines.h"
+#include "shadowlog.h"
+
+
+void *
+xcalloc(size_t nmemb, size_t size)
+{
+	void  *p;
+
+	p = calloc(nmemb, size);
+	if (p == NULL)
+		goto x;
+
+	return p;
+
+x:
+	fprintf(log_get_logfd(), _("%s: %s\n"),
+	        log_get_progname(), strerror(errno));
+	exit(13);
+}

lib/alloc/x/xcalloc.h

@@ -0,0 +1,28 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_X_XCALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_X_XCALLOC_H_
+
+
+#include <config.h>
+
+#include <stddef.h>
+#include <stdlib.h>
+
+#include "attr.h"
+
+
+#define XCALLOC(n, type)                                                      \
+(                                                                             \
+	(type *) xcalloc(n, sizeof(type))                                     \
+)
+
+
+ATTR_ALLOC_SIZE(1, 2)
+ATTR_MALLOC(free)
+void *xcalloc(size_t nmemb, size_t size);
+
+
+#endif  // include guard

lib/alloc/x/xmalloc.c

@@ -0,0 +1,16 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/x/xmalloc.h"
+
+#include <stddef.h>
+
+
+extern inline void *xmallocarray(size_t nmemb, size_t size);

lib/alloc/x/xmalloc.h

@@ -0,0 +1,35 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_X_XMALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_X_XMALLOC_H_
+
+
+#include <config.h>
+
+#include <stddef.h>
+
+#include "alloc/x/xrealloc.h"
+#include "attr.h"
+
+
+#define XMALLOC(n, type)                                                      \
+(                                                                             \
+	(type *) xmallocarray(n, sizeof(type))                                \
+)
+
+
+ATTR_ALLOC_SIZE(1, 2)
+ATTR_MALLOC(free)
+inline void *xmallocarray(size_t nmemb, size_t size);
+
+
+inline void *
+xmallocarray(size_t nmemb, size_t size)
+{
+	return xreallocarray(NULL, nmemb, size);
+}
+
+
+#endif  // include guard