Use the new Size::isNull() function through the code base to replace
manual checks. While the new code isn't equivalent, as isNull() checks
that both width and height are zero, it catches the same conditions in
practice.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Construct a FrameBuffer for every buffer given in the camera3Request
and add it to the libcamera Request on the appropriate stream.
The correct stream is obtained from the private data of the camera3_stream
associated with the camera3_buffer.
Comments regarding supporting only one buffer are now removed, and
FrameBuffers have their lifetime tracked in the Camera3RequestDescriptor
to ensure they are released when the Request is completed.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Introduce a vector storing a CameraStream to track and maintain
state between an Android stream (camera3_stream_t) and a libcamera
Stream.
Only the index of the libcamera stream is stored, to facilitate identifying
the correct index for both the StreamConfiguration and Stream vectors.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Providing an empty set of roles is permitted to generate an empty
configuration from the pipeline handlers.
Overload the generateConfiguration() function such that not specifying a
roles parameter will use an empty set, and return an empty
configuration.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Provide a control to allow the IPA to return a FoM to indicate how
in-focus a scene is. Note, this is not to be used as a means to
implement a focus algorithm by the application, rather an indication of
how in-focus a scene is.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Simplify the newline skipping logic by simply collapsing newlines. If a
newline has been output, all subsequent newlines will be skipped until
the next non-newline character is output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Indentation is handled by outputting spaces right after outputting a
newline character. That works in most cases, but would result in the
input '{}' being printed as
{
}
instead of
{
}
Fix it by outputting the indentation before outputting the next
character after a newline. The indentation value will be updated by
then.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
The ctt_pretty_print_json.py file supports being run standalone to test
the code. It however suffers from multiple issues:
- The same input file name is hardcoded, and doesn't exist in the
repository
- The input file name is used instead of JSON data
Fix both issues and make the input file selectable on the command line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Previously, output of the focus measure could not be enabled without
recompiling (because of the RPI_LOGGING_ENABLE macro). This uses the
libcamera logging mechanism instead, so can be enabled/disabled at
runtime.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
It's confusing to read the code and understand that a request is only
completed before being processed by the ImgU if it only contains a
single RAW buffer. Add a boolean variable with a explanatory name to
make this clearer, no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Sharing a pointer with the IPA is fragile as it will not work with all
IPC mechanisms. Document that it's a temporary workaround that should be
reworked.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The generateConfiguration() implementation does not check if the
requested list of roles can actually be satisfied. The camera API
documentation prescribes the function shall fail in that case, instead
of silently adjust the returned configuration.
Fix this by implementing the same logic as the validate() function
implements, as the pipeline handler supports one raw stream and up to
two output streams.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
The IPU3 pipeline handler that does not support receiving an empty list
of roles at generateConfiguration() time. This contradicts the camera
API which allows application to generate empty CameraConfiguration to
be later manually filled.
Fix this by returning an empty CameraConfiguration if the list of
requested roles is empty. While at it, align the style with the other
pipeline handlers.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
The struct ImgUOutput now only contains one member that is in use, the
video device. Remove the struct and use the video device directly
instead.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The active_ flag is only used inside one function, remove the global
flag and handle it inside the single function.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Do not keep the duplicated ImgUDevice::ImgUOutput information in both
the stream and camera data classes. Remove it from the stream and only
access it from the camera data class.
Which stream is which can instead be checked by comparing it to the
known streams in camera data. This match how streams are checked in
other parts of the code making the pipeline more coherent.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When the IPU3 pipeline only provided streams to applications that came
from the ImgU it made sense to have a generic function to configure all
the different outputs. With the addition of the RAW stream this begins
to be cumbersome to read and make sense of in the PipelineHandlerIPU3
code. Replace the generic function that takes a specific argument for
which sink to configure with a specific function for each sink.
This makes the code easier to follow as it's always clear which of the
ImgU sinks are being configured without knowing the content of a
generically named variable. It also paves the way for future
improvements.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When the IPU3 pipeline was first developed sinks of the ImgU that where
not active still needed to have buffers allocated to allow streaming to
start. This is no longer true, it's enough that the sinks have imported
buffers to allow streaming to start. As we already need to import
buffers for stream that are active we can align the two cases and always
import buffers.
With this there is no longer a reason to store the allocated
FrameBuffers to keep them alive and the vector tracking them can be
removed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Statistics buffers are not yet used by the IPU3 pipeline, they are never
queued to the statistics video device or in any other way consumed. The
kernel driver will however not allow video streaming to start if buffers
are not either allocated or imported on the statistics video device.
Instead of allocating the buffers wasting memory that is never used,
import buffers.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
