If the log file specified through LIBCAMERA_LOG_FILE can't be opened,
logging is currently completely disabled. This doesn't match the
documented behaviour that tells std::cerr is used instead. Fix it to
match the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
While std::cerr and stderr both target the same file by default, this
may be overridden by applications. Update the documentation to use
std::cerr instead of stderr to be accurate.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
libcamera uses double quotes for #include directives for internal
headers. A few <...> have found their way in the code base over time.
Fix them.
While at it, move an Android header include to the right location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The IncludeOrderFormatter will be extended with more formatting rules
that should be applied before clang-format gets run, as it will
influence its output.
Add a priority mechanism for formatters, and give a negative priority to
the CLangFormatter to make it run last.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Commit 8a845ab078 ("libcamera: Replace toString with operator<<() for
format classes") incorrectly converted some of the toString() usages,
resulting in pointer values being printed instead of formats. Fix it.
Fixes: 8a845ab078 ("libcamera: Replace toString with operator<<() for format classes")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
We create symlinks from the Python bindings build dir to the source dir
so that 1) the build dir can be used to use the bindings, and 2) to
allow modifications of the source .py files to be used right away
without rebuilding.
The symlinks were recently fixed and changed to use absolute paths.
However, absolute paths ruin one main use case I have: using the
bindings from the build dir via nfs from an ARM device.
So move back to relative paths, but accomplish this with the --relative
parameter for ln, instead of guessing the right relative path as was
done before the above-mentioned fix.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add ControlInfo class and change the controls related methods to
resemble the C++ API (e.g. no more string based control methods).
We don't implement ControlList or ControlInfoMap but just expose the
same data via standard Python dict.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The Python bindings controls generation was not very good. It only
covered the enums and they were in the main namespace.
This adds the controls somewhat similarly to the C++ side. We will have
e.g.:
libcamera.controls.Brightness
libcamera.controls.AeMeteringModeEnum.CentreWeighted
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The C structures used to serialize controls are currently defined in the
root namespace, which places them at the root level in the class list
generated by Doxygen. Move them to the libcamera namespace to fix that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Use the removable attribute exposed by the USB device in sysfs to infer
if the camera is an external (when removable) or front (when
non-removable) camera. This is likely not perfect as the removable
attribute is derived from ACPI data which may not always be accurate,
and non-ACPI platforms likely report all devices as removable. Still,
this is a first step upon which a better method could be built.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The MediaDevice::driver(), deviceNode() and model() functions return a
const std::string, copying the string stored internally in the class.
Return references instead to avoid copies.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
This patch describes a series of controls that allow applications to
drive AF algorithms:
AfMode - manual, auto or continuous
AfRange - full, macro or normal
AfSpeed - fast or slow
AfMetering - how to choose where to measure focus
AfWindows - AF window locations
AfTrigger - start (trigger) an AF scan or cancel
AfPause - pause continuous AF
LensPosition - set or retrieve position of lens
AfState - reports whether scanning/success/failure
AfPauseState - reports whether continuous AF paused or not
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This adds more portability to existing cam sinks. You can pass a
YUYV camera buffer and SDL will handle the pixel buffer conversion
to the display. This allows cam reference implementation to display
images on VMs, Mac M1, Raspberry Pi, etc. This also enables cam
reference implementation, to run as a desktop application in Wayland or
X11. SDL also has support for Android and ChromeOS which has not been
tested. Also tested on simpledrm Raspberry Pi 4 framebuffer
successfully where existing kms sink did not work. Can also be used as
kmsdrm sink. Only supports one camera stream at present.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The freeBuffers() cleanup code calls into the IPA to unmap and free
shared buffers. However, this function could be called before the IPA
has opened (via registerCamera()), causing a segmentation fault. Fix
this by guarding against calling the IPA if it has not been opened.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a "--script" option to the cam test application to allow specify a
capture script to be used to drive the capture session. Add to the
CameraSession class a script parser instance, created conditionally to
the OptCaptureScript option.
If the script parser has been created, use it at queueRequest time to
retrieve the list of controls that has to be associated with a Request,
and populate Request::controls() with it before queueing it to the
Camera.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The CameraSession::processRequest() frame completion handler currently
re-queues completed requests by calling Camera::queueRequests()
explicitely.
In order to maintain the CameraSession::queuedRequest_ counter up to
date with the actual number of queued requests, call the
CameraSession::queueRequest() instead of operating the Camera directly.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a parser class to the cam test application to control the capture
operations through a yaml script.
The capture script currently allow to specify a list of controls and
their associated values to be applied per-frame.
Also add a trivial capture script example to showcase the intended
script structure.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
