Bumped version number to 0.25.1.

1998-08-29  Martin Baulig  <martin@home-of-linux.org>

	* LIBGTOP-VERSION (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): Added.
	* configure.in (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): AC_SUBST.
	(LT_RELEASE, LT_CURRENT, LT_REVISION, LT_AGE): AC_SUBST.
	(LT_VERSION_INFO): Sets `-version-info' for libtool.

.cvsignore

@@ -0,0 +1,27 @@
+Makefile
+Makefile.in
+aclocal.m4
+config.cache
+config.h
+config.h.in
+config.log
+config.status
+configure
+gtopConf.sh
+i386-bsdi
+i686-pc-linux-gnu
+intl
+libgtop-0.01.tar.gz
+libgtop-mirror.sh.swp
+libgtopConf.sh
+libtool
+ltconfig
+ltmain.sh
+macros
+stamp-h
+sun4
+sun4sol2
+support
+i386-freebsd
+alpha-dec-osf3.0
+i686-pc-linux-gnu-linux

ABOUT-NLS

@@ -0,0 +1,225 @@
+Notes on the Free Translation Project
+*************************************
+
+   Free software is going international!  The Free Translation Project
+is a way to get maintainers of free software, translators, and users all
+together, so that will gradually become able to speak many languages.
+A few packages already provide translations for their messages.
+
+   If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site.  But you do *not*
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work at translations should contact the appropriate team.
+
+   When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used.  The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+One advise in advance
+=====================
+
+   If you want to exploit the full power of internationalization, you
+should configure it using
+
+     ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed.  So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias or message inheritance) as the
+implementation here.  It is also not possible to offer this additional
+functionality on top of a `catgets' implementation.  Future versions of
+GNU `gettext' will very likely convey even more functionality.  So it
+might be a good idea to change to GNU `gettext' as soon as possible.
+
+   So you need not provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+INSTALL Matters
+===============
+
+   Some packages are "localizable" when properly installed; the
+programs they contain can be made to speak your own native language.
+Most such packages use GNU `gettext'.  Other packages have their own
+ways to internationalization, predating GNU `gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system provides
+usable `catgets' (if using this is selected by the installer) or
+`gettext' functions.  If neither is available, the GNU `gettext' own
+library will be used.  This library is wholly contained within this
+package, usually in the `intl/' subdirectory, so prior installation of
+the GNU `gettext' package is *not* required.  Installers may use
+special options at configuration time for changing the default
+behaviour.  The commands:
+
+     ./configure --with-included-gettext
+     ./configure --with-catgets
+     ./configure --disable-nls
+
+will respectively bypass any pre-existing `catgets' or `gettext' to use
+the internationalizing routines provided within this package, enable
+the use of the `catgets' functions (if found on the locale system), or
+else, *totally* disable translation of messages.
+
+   When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this.  This might be not what is desirable.  You
+should use the more recent version of the GNU `gettext' library.  I.e.
+if the file `intl/VERSION' shows that the library which comes with this
+package is more recent, you should use
+
+     ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+   By default the configuration process will not test for the `catgets'
+function and therefore they will not be used.  The reasons are already
+given above: the emulation on top of `catgets' cannot provide all the
+extensions provided by the GNU `gettext' library.  If you nevertheless
+want to use the `catgets' functions use
+
+     ./configure --with-catgets
+
+to enable the test for `catgets' (this causes no harm if `catgets' is
+not available on your system).  If you really select this option we
+would like to hear about the reasons because we cannot think of any
+good one ourself.
+
+   Internationalized packages have usually many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+Using This Package
+==================
+
+   As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+ISO 639 `LL' two-letter code prior to using the programs in the
+package.  For example, let's suppose that you speak German.  At the
+shell prompt, merely execute `setenv LANG de' (in `csh'),
+`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash').  This
+can be done from your `.login' or `.profile' file, once and for all.
+
+   An operating system might already offer message localization for
+many of its programs, while other programs have been installed locally
+with the full capabilities of GNU `gettext'.  Just using `gettext'
+extended syntax for `LANG' would break proper localization of already
+available operating system programs.  In this case, users should set
+both `LANGUAGE' and `LANG' variables in their environment, as programs
+using GNU `gettext' give preference to `LANGUAGE'.  For example, some
+Swedish users would rather read translations in German than English for
+when Swedish is not available.  This is easily accomplished by setting
+`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
+
+Translating Teams
+=================
+
+   For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list, courtesy of Linux
+International.  You may reach your translation team at the address
+`LL@li.org', replacing LL by the two-letter ISO 639 code for your
+language.  Language codes are *not* the same as the country codes given
+in ISO 3166.  The following translation teams exist, as of August 1997:
+
+     Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
+     Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
+     `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
+     Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
+     `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
+     Swedish `sv', and Turkish `tr'.
+
+For example, you may reach the Chinese translation team by writing to
+`zh@li.org'.
+
+   If you'd like to volunteer to *work* at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is *not* the same as the list itself, it has
+`-request' appended.  For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate
+*actively* in translations, or at solving translational difficulties,
+rather than merely lurking around.  If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `translation@iro.umontreal.ca' to reach the
+coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skill are praised more than
+programming skill, here.
+
+Available Packages
+==================
+
+   Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of August
+1997.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination.
+
+     Ready PO files    cs da de en es fi fr it ja ko nl no pl pt sl sv
+                     .-------------------------------------------------.
+     bash            |       []          []          []                |  3
+     bison           |       []          []          []                |  3
+     clisp           |       [] [] []    []                            |  4
+     cpio            |       []    []    []          []    []          |  5
+     diffutils       |       []    []    []                []       [] |  5
+     enscript        |       []    [] [] []          []          []    |  6
+     fileutils       | []    []    []    []       [] []    [] [] [] [] | 10
+     findutils       |       []    []    [] []    [] []    []       [] |  8
+     flex            |             []    []       []                [] |  4
+     gcal            |       []          []          []    []       [] |  5
+     gettext         |       []    []    []       [] [] [] [] [] [] [] | 11
+     grep            |       []    []    []       [] [] [] []    [] [] |  9
+     hello           |       []    []    []       [] [] [] [] [] [] [] | 10
+     id-utils        |       []          []                []          |  3
+     indent          |    [] []                   []       []          |  4
+     libc            |       []    []    []       [] []    []       [] |  7
+     m4              |       []          []    []    []             [] |  5
+     make            |       []    []    []       [] []    []          |  6
+     music           |                   []                []          |  2
+     ptx             |       []    []    []          [] [] [] []    [] |  8
+     recode          |    [] []    []    []          []    [] [] [] [] |  9
+     sh-utils        |       []          []          [] [] [] []    [] |  7
+     sharutils       |       []    []    []          []             [] |  5
+     tar             |       []          [] []    [] [] [] [] [] [] [] | 10
+     texinfo         |                   []                            |  1
+     textutils       | []    []    []    []       [] [] [] []       [] |  9
+     wdiff           | []    []    []    []          [] [] []       [] |  8
+                     `-------------------------------------------------'
+       16 languages    cs da de en es fi fr it ja ko nl no pl pt sl sv
+       27 packages      3  2 24  1 17  1 26  2  1 11 20  9 19  7  7 17  167
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer.  There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+   If August 1997 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites.
+

ANNOUNCE

@@ -0,0 +1,95 @@
+Hi all,
+
+I just uploaded the first working draft alpha version 0.01 to my website:
+
+  http://www.home-of-linux.org/gnome/libgtop/
+
+Libgtop is a library that fetches information about the running system such as cpu and
+memory usage, active processes etc. On Linux systems, these information are taken directly
+from the /proc filesystem. For other systems such as Solaris, where such programs need to be
+suid root (or only setgid kmem/mem on some systems), it provides a suid/setgid server that
+fetches those information and a client-side library that talks to this server. Main idea
+was to have the same interface for all operating systems, thus all system dependent details
+are hidden in the implementation of that server.
+
+Currently, it only works for Linux, documentation on how to port it to other systems is on
+the way. I'm planning to keep this site an up-to-date mirror of my local machine (which is
+connected to the internet over some expensive dialup connection, so I'll upload it about
+once every day I made significant changes) so that you can always find the latest version
+of the software here.
+
+I've written a simple guile interface for the library to show which information it can
+already fetch. See examples/third for details.
+
+===========================================================================================
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+
+#include <glibtop/cpu.h>
+
+int
+main (int argc, char *argv [])
+{
+        glibtop server;
+        glibtop_cpu cpu;
+        unsigned i, *ptr;
+
+        setlocale (LC_ALL, "");
+        bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+        textdomain (PACKAGE);
+
+        glibtop_open (&server, argv [0]);
+
+        glibtop_get_cpu (&server, &cpu);
+
+        fprintf (stderr, "CPU: %lu, %lu, %lu, %lu, %lu\n",
+                 cpu.total, cpu.user, cpu.nice, cpu.sys, cpu.idle);
+
+        glibtop_close (&server);
+
+        exit (0);
+}
+
+===========================================================================================
+
+The following scheme code is used in examples/third to show all information that is
+currently available:
+
+        (display (get-cpu)) (newline)
+        (display (get-mem)) (newline)
+        (display (get-swap)) (newline)
+        (display (get-uptime)) (newline)
+        (display (get-loadavg)) (newline)
+        (display (get-shm_limits)) (newline)
+        (display (get-msg_limits)) (newline)
+        (display (get-sem_limits)) (newline)
+        (display (get-sysdeps)) (newline)
+        (display (get-proclist)) (newline)
+
+On my system, this yields:
+
+(3796245 348706 66 89999 3357474)
+(31715328 31354880 360448 13385728 401408 7237632 17567744)
+(133885952 42160128 91725824)
+(37962.49 33574.74)
+(0.01 0.02 0.0)
+(33554432 1 128 128 4194304)
+(2048 16384 4056 16384 128 16 16384)
+(4096 128 4096 4096 32 32 32 20 32767 16383)
+(31 127 7 3 1 31 127 1023 3)
+(71 4 284 1 2 3 246 247 210 8 48 81 83 153 157 167 170 171 172 173 174 175 178 181 195 191 200 203 207 248 215 216 217 220 222 227 245 249 250 251 253 254 315 267 331 373 338 334 335 345 337 372 374 342 343 344 375 14445 13119 6438 14555 13118 13801 6439 17362 18411 18455 6521 6522 6523 23979 23980 7905 7906)
+
+===========================================================================================
+
+Better documentation is on the way! There's still a little bit under the URL above.
+
+Enjoy it!
+
+Martin <martin@home-of-linux.org>
+
+
+
+
+

ANNOUNCE-0.25

@@ -0,0 +1,241 @@
+[Posted to the Gnome Mailing List on Fri Aug 21 1998]
+
+About this release:
+------------------
+
+LibGTop 0.25 is a stable release.
+
+Of cause it has its bug like any software has, I'm planning
+to fix as many bugs as possible in _this_ release and then
+re-release it as libgtop-0.26 or even libgtop-0.30.
+
+Especially portings to new operating systems should be made
+in this release.
+
+This also means that we can safely use this version of LibGTop
+all over the GNOME project.
+
+Currently LibGTop-Apps is still a little bit under development -
+especially the LibGTop-Apps GTop does not yet have the full
+functionallity of the real GTop.
+
+We should test this extensively and then decide whether to continue
+with the `libgtop-apps' module or whether to merge all its code
+back into the modules it came from. I'd like to hear some comments
+about this from you !
+
+Please look at the release notes below for more details about this
+release.
+
+Where to get the sources
+------------------------
+
+The sources can be found at:
+
+	ftp://ftp.home-of-linux.org/pub/
+
+Tarballs:
+
+	libgtop-0.25.0.tar.gz
+	libgtop-apps-0.25.0.tar.gz
+
+Source RPM:
+
+	libgtop-0.25.0-REL.src.rpm
+	libgtop-apps-0.25.0-REL.src.rpm
+
+Binary RPMS:
+
+	libgtop-0.25.0-REL.i386.rpm
+	libgtop-devel-0.25.0-REL.i386.rpm
+	libgtop-examples-0.25.0-REL.i386.rpm
+	libgtop-apps-0.25.0-REL.i386.rpm
+
+There is some little problem with the binary RPMS of `libgtop-apps':
+
+Most of its files will conflict with ones from `gnome-core' and `gnome-utils',
+so you'll need to use the `--force' parameter to install it.
+
+Getting the sources from CVS:
+----------------------------
+
+You can also fetch the sources from the GNOME CVS tree
+(see http://www.gnome.org/ for details).
+
+To get the latest sources:
+
+$ cvs checkout libgtop
+$ cvs checkout libgtop-apps
+
+To get the sources of *this* release:
+
+$ cvs checkout -r LIBGTOP_0_25 libgtop
+$ cvs checkout -r LIBGTOP_0_25 libgtop-apps
+
+To get the sources of this release with all bug-fixes applied:
+
+$ cvs checkout -r LIBGTOP_0_25_PATCHES libgtop
+$ cvs checkout -r LIBGTOP_0_25_PATCHES libgtop-apps
+
+To get a patch to apply to the tarballs to get all bug-fixes:
+
+$ cvs rdiff -r LIBGTOP_0_25 -r LIBGTOP_0_25_PATCHES libgtop
+$ cvs rdiff -r LIBGTOP_0_25 -r LIBGTOP_0_25_PATCHES libgtop-apps
+
+[Note for people having write access to the GNOME CVS tree:
+
+ Please apply bug fixes to the `LIBGTOP_0_25_PATCHES' branch and
+ merge them into the main trunk.
+
+ After merging, please re-tag the branch `libgtop_0_25_after_merge'.
+
+ This will help us to re-release this package when all bugs are
+ fixed.
+]
+
+RELEASE NOTES FOR LIBGTOP 0.25 STABLE
+=====================================
+
+OVERVIEW
+--------
+
+LibGTop is a library that read information about processes and the running
+systems. This information include:
+
+General System Information
+
+cpu		- CPU Usage
+mem		- Memory Usage
+swap		- Swap Usage (including paging activity)
+loadavg		- Load average (including nr_running, nr_tasks, last_pid)
+uptime		- Uptime and Idle time, can be calculated from CPU usage
+
+SYS V IPC Limits:
+
+shm_limits	- Shared Memory Limits
+msg_limits	- Message Queue Limits
+sem_limits	- Semaphore Set Limits
+
+Process List:
+
+proclist	- List of processes
+
+Process information:
+
+proc_state	- cmd, state, uid, gid
+proc_uid	- uid,euid,gid,egid,pid,ppid,pgrp
+		  session,tty,tpgid,priority,nice
+proc_mem	- size,vsize,resident,share,rss,rss_rlim
+proc_time	- start_time,rtime,utime,stime,cutime,cstime
+		  timeout,it_real_value,frequency
+proc_signal	- signal,blocked,sigignore,sigcatch
+proc_kernel	- k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt
+		  kstk_esp,kstk_eip,nwchan,wchan
+proc_segment	- text_rss,shlib_rss,data_rss,stack_rss,dirty_size
+		  start_code,end_code,start_stack
+
+Process maps:
+
+proc_map	- Process map (/proc/<pid>/maps under Linux)
+
+File system usage:
+
+mountlist	- List of currently mounted filesystems
+fsusage		- File system usage
+
+PORTABILITY:
+-----------
+
+LibGtop is designed to be as portable as possible. None of the functions
+and retrieved information should be specific to a specific operating
+system. So you only need to port the system dependent part of the library
+to a new system and all application programs can then use libgtop on this
+new system.
+
+CLIENT/SERVER MODEL:
+-------------------
+
+Some systems like DEC OSF/1 or BSD require special priviledges for the calling
+proces to fetch the required information (SUID root/SGID kmem). To solve this
+problem, I designed a client/server model which makes a call to a SUID/SGID
+server which fetches the required information whenever it is required. This
+server is only called for features that really require priviledges, otherwise
+the sysdeps code is called directory (every user can get the CPU usage on
+DEC OSF/1, but only root can get information about processes other than the
+current one).
+
+There is also some kind of daemon which can be used to fetch information from
+remote systems (still experimental). This daemon normally runs as nobody and
+calls the SUID/SGID itself when needed.
+
+GNOME APPLETS:
+--------------
+
+There are some applets and applications which already use LibGTop. They can
+be found in the `libgtop-apps' module in the GNOME CVS tree:
+
+* Applets:  cpuload, cpumemusage - they need LibGTop to get their information
+                                   on all systems other than Linux.
+
+* Applets:  diskusage - just uses the mountlist/fsusage features of LibGTop,
+                        the one in gnome-core also works on other systems.
+
+* Applets:  multiload - I enhanced the cpuload applet a little bit, it is
+                        now a multi applet and can display CPU, Memory and
+                        Swap usages.
+
+GTOP:
+----
+
+This cool GNOME app has been ported to use LibGTop. It can be found in
+`libgtop-apps/gtop' in the GNOME CVS tree.
+
+You can now use nearly the full functionality of GTop on FreeBSD !
+
+
+PLATTFORM SPECIFIC NOTES FOR LINUX:
+==================================
+
+Under Linux, LibGTop should work without problems and read everything
+from /proc.
+
+There is also an experimental kernel interface to read this information
+directly from the kernel with a system call - but this is still experimental
+and not well tested while I made this release.
+
+PLATTFORM SPECIFIC NOTES FOR FREEBSD:
+====================================
+
+LibGTop should now work under FreeBSD and give you the full functionality
+of GTop.
+
+There are a few caveats:
+
+* You need to manually make the `$(prefix)/bin/libgtop_server' SGID to kmem
+  after installation and mount the /proc filesystem of FreeBSD
+  (/proc/<pid>/mem is used withing kvm_uread ()).
+
+* To get the filenames of the process maps displayed in GTop, you need to
+  configure with the `--with-libgtop-inodedb' option (you need GDBM for this
+  to work).
+
+* You have then to create an inode database which is used to look up to
+  filenames. This is done using the `mkinodedb' program which comes along
+  with libgtop.
+
+  See the file src/inodedb/README for details:
+
+  The `mkinodedb' program which is build in this directory takes two
+  command line arguments: the full pathname of the database to be created
+  and the name of a configuration file consisting of directory and file names
+  each on a line by itself - see `/etc/ld.so.conf' for an example.
+
+  Putting a directory name in this file means all regular files found in this
+  directory are included in the database, but it will not recursively descend
+  into subdirectories (for instance, we want everythink in `/usr/lib' but not
+  every single file in `/usr/lib/sgml'). You can also use filenames to include
+  a single file.
+
+Have fun,
+
+Martin <martin@home-of-linux.org>

AUTHORS

@@ -0,0 +1,2 @@
+Martin Baulig (martin@home-of-linux.org)
+Josh Sled <jsled@scam.XCF.Berkeley.EDU>

ChangeLog

@@ -1,746 +1,3 @@
-2001-02-26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	<09> configure.in,po/*.po: added various languages from CVS head
-
-2001-02-13  Stanislav Visnovsky  <visnovsky@nenya.ms.mff.cuni.cz>
-
-	* configure.in: Added sk to ALL_LINGUAS.
-
-2000-02-16  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 1.1.2.1 "Hardangervidda goes Paris".
-
-	* LIBGTOP-VERSION: Set version number to 1.1.2.1 and let the
-	tarball be called `libgtop-1.1.2.1-solaris.tar.gz'.
-
-2000-01-16  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION (LIBGTOP_VERSION_SUFFIX): Added this so you can
-	have your tarballs called `libgtop-1.x.y-snap.tar.gz' or whatever.
-	This only affects the `VERSION' variable and thus how the resulting
-	tarball will be called, but not `LIBGTOP_VERSION_CODE' etc.
-
-	* Makefile.am: Make `aclocal.m4' also depend on `LIBGTOP-VERSION'
-	when in maintainer-mode.
-
-1999-10-19  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 1.1.2 "Hardangervidda".
-
-1999-10-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* RELNOTES-1.1.x: New file. We also track all changes since
-	1.0.x here.
-
-	* NEWS: We start maintaining a NEWS file now :)
-
-	* NEWS.old: Removed obsolete file.
-
-	* TODO: Nuked it. We may need this file later ...
-
-1999-10-17  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (DL_LIB): Check for dlopen() and AC_SUBST this.
-
-1999-10-17  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Fixed typedef syntax for glibtop-config.h.
-	Thanks to Drazen Kacar for pointing this out.
-
-1999-10-16  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION: Set version number to 1.1.2, binary age 2,
-	interface age 2.
-
-1999-09-29  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (libgtop_top_builddir): AC_SUBST this.
-
-1999-09-27  Rodrigo Stulzer Lopes <rodrigo@conectiva.com.br>
-
-	* configure.in: Added "pt_BR" to ALL_LINGUAS.
-	
-1999-09-22  Kjartan Maraas  <kmaraas@online.no>
-
-	* configure.in: Added "da" to ALL_LINGUAS.
-	
-1999-09-19  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtopConf.sh.in: Added MODULE_VERSION on Miguel's
-	request (set it to "libgtop-@LIBGTOP_VERSION@").
-
-1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* configure.in, po/pl.po: copied pl.po from stable CVS tree
-
-1999-09-17  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Make it work if we have GNOME and the user
-	gave use --without-gnome (fixes bug #1735).
-
-1999-07-29  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/error.h: Use G_GNUC_UNUSED.
-
-	* configure.in (ENABLE_STATIC, ENABLE_SHARED): New automake
-	conditionals.
-
-1999-07-27  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (LT_VERSION_INFO): Add `-release ${LT_RELEASE}'.
-	This way you can have both 1.0.x and 1.1.x libraries under the
-	same ${prefix}.
-
-1999-07-27  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION: Set version number to 1.1.1 binary age 1,
-	interface age 1.
-
-1999-07-11  Tomas Ogren  <stric@ing.umu.se>
-
-	* configure.in: Added sv to ALL_LINGUAS
-
-1999-07-11  Tomas Ogren  <stric@ing.umu.se>
-
-	* sysdeps/names/procmem.c: Fixed a tyop
-
-1999-06-22  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Some versions of Solaris require -lelf for -lkvm;
-	added appropriate check for this situation.
-
-1999-05-28  Martin Baulig  <baulig@Stud.Informatik.Uni-Trier.DE>
-
-	* include/glibtop/sysdeps.h: Remove the `GLIBTOP_SYSDEPS_FEATURES'
-	and `GLIBTOP_SYSDEPS_POINTER_SIZE' constants and let numbering
-	start at zero for `GLIBTOP_SYSDEPS_CPU'.
-
-1999-05-28  Martin Baulig  <martin@home-of-linux.org>
-
-	* glibtop.h (GLIBTOP_MOUNTENTRY_LEN): Move this
-	* include/glibtop/limits.h: here.
-
-1999-05-26  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (INCLUDES): Define `LIBGTOP_VERSION_CODE' here so we
-	can use version conditionals in the sysdeps code.
-
-1999-05-25  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4: Make the I4B check work for NetBSD.
-
-1999-05-15  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4: Remove the `--enable-hacker-mode' requirement
-	for the BSDI, Solaris and Digital Unix ports.
-
-1999-05-13  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4 (GLIBTOP_SOLARIS_RELEASE): Define this on Solaris;
-	we use version codes like 270 for SunOS 5.7 and 251 for SunOS 2.5.1.
-
-1999-05-12  Martin Baulig  <martin@home-of-linux.org>
-
-	* glibtop-config.h: This is a new generated file which will be
-	included from <glibtop.h>. We define things like `u_int64_t' and
-	LIBGTOP_*_VERSION here so we can compile LibGTop applications with
-	`libgtop-config --cflags`.
-
-	* configure.in: Create glibtop-config.h.
-	(GLIBTOP_*_INCS): Added `-I $(pkglibdir)/include'.
-
-	* libgtop-config.h.in: Added `--cflags', `--libs' and `--extra-libs'
-	parameter so you can now use LibGTop even in no-autoconf apps.
-
-	* Makefile.am: Install `glibtop-config.h' in `$(pkglibdir)/include'.
-
-1999-05-09  Drazen Kacar  <dave@srce.hr>
-
-	* configure.in, acconfig.h: Added checks for <procfs.h>
-	and <sys/procfs.h>
-
-1999-05-09  Martin Baulig  <martin@home-of-linux.org>
-
-	* doc: One should ship the documentation of a package together with
-	the tarball, so I added this back.
-
-1999-05-08  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/limits.h (GLIBTOP_MAX_GROUPS): Define this here.
-	* include/glibtop/procuid.h (GLIBTOP_MAX_GROUPS): Moved to limits.h.
-
-	* features.def: We can use constants from <glibtop/limits.h> here.
-
-1999-05-08  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4: Use the setgid sys server for Solaris.
-
-1999-05-06  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/sysdeps.h (glibtop_sysdeps): Added `pointer_size'
-	which is the number of bits of a `void *'.
-
-1999-05-03  Martin Baulig  <martin@home-of-linux.org>
-
-	Set version number to 1.1.0. Also made a `LIBGTOP_STABLE_1_0'
-	branch in CVS while development will go on here in the HEAD.
-
-	* LIBGTOP-VERSION: Set version number to 1.1.0 binary age 0,
-	interface age 0. Set LIBGTOP_SERVER_VERSION to 50.
-
-1999-04-18  Tuomas J. Lukka <lukka@iki.fi>
-
-	* Add missing comma in sysdeps/names/proctime.c
-
-1999-04-18  Tuomas J. Lukka <lukka@iki.fi>
-
-	* Add missing comma in sysdeps/names/cpu.c
-
-1999-04-18  Martin Baulig  <martin@home-of-linux.org>
-
-	Thanks to Drazen Kacar for pointing out that not all processors must
-	be running all the time under Solaris, so we need to have some flag
-	to find out which processors are running.
-
-	* (glibtop_cpu): Added `xcpu_flags' bitmask of running processors.
-	* (glibtop_proc_time): Added `xcpu_flags'.
-
-1999-04-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/limits.h: New file.
-	(GLIBTOP_NCPU): Define this here and increase it to 64.
-
-1999-03-30  Martin Baulig  <martin@home-of-linux.org>
-
-	Added some new features.
-
-	* (glibtop_uptime): Added `boot_time', boot time in seconds
-	since the epoch.
-	
-	* (glibtop_proc_state): Changed `state' from char to unsigned.
-	`uid' and `gid' are effective uid and gid; added comment.
-	Added `ruid' and `rgid' for guaranteed-to-be-correct real uid/gid.
-	For SMP systems: added `has_cpu', `processor' and `last_processor'.
-
-	* (glibtop_proc_uid): Added suid, sgid, fsuid, fsgid, ngroups, groups.
-
-	* (glibtop_proc_segment): Added start_data, end_data, start_brk,
-	end_brk, start_mmap, arg_start, arg_end, env_start, env_end.
-
-	* include/glibtop/procstate.h: Define some constants for the `state'
-	field of glibtop_proc_state.
-
-	* include/glibtop/prockernel.h: Define some constants for the
-	`k_flags' field of glibtop_proc_kernel.
-	
-1999-03-24  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Check for getloadavg () and swapctl () for
-	Solaris.
-
-1999-03-23  Martin Baulig  <martin@home-of-linux.org>
-
-	* glibtop.h (glibtop): Added `wanted'. Applications can set the
-	features they are interested in here. This way we don't waste CPU
-	getting expensive data that aren't really needed.
-
-	* LIBGTOP-VERSION: This breaks backward compatibility and also
-	added new functions; set binary	age and interface age to 0.
-
-1999-03-21  Martin Baulig  <martin@home-of-linux.org>
-
-	Added a new sysctl () interface to the Linux Kernel.
-	
-	* kernel/sysctl: Imported.
-	
-	* libgtop-sysdeps.m4: If `--enable-hacker-mode' is given, check
-	for my new sysctl () interface.
-
-1999-03-20  Martin Baulig  <martin@home-of-linux.org>
-
-	Removed all traces of my old table () Linux kernel hack.
-
-	* kernel: Removed.
-	* sysdeps/kernel: Removed.
-	* libgtop-sysdeps.m4: Don't check for table (); it does not
-	exist any longer.
-
-1999-03-19  Martin Baulig  <martin@home-of-linux.org>
-
-	This is *untested* - please read "sysdeps/freebsd/ChangeLog" !
-
-	* libgtop-sysdeps.m4: Use the `freebsd' sysdeps directory for
-	BSDI as well if the `--enable-hacker-mode' parameter was given.
-
-1999-03-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION: Set version number to 1.0.2 binary age 1,
-	intergace age 1.
-
-1999-03-17  Martin Baulig  <martin@home-of-linux.org>
-
-	Imported first version of my Solaris port.
-
-	* configure.in: Check for `kstat_open' in `-lkstat'.
-
-	* libgtop-sysdeps.m4: Recognize the `solaris' sysdeps directory
-	when the `--enable-hacker-mode' parameter was given.
-
-1999-03-01  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 1.0.1.
-
-	* LIBGTOP-VERSION: Set version number to 1.0.1 binary age 0,
-	interface age 0.
-
-1999-03-01  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (LIBGTOP_LIBS): Move `-lgtop_common' last to
-	make it work with static-only libs. Thanks to Roderik Muit
-	for pointing this out.
-	(PERL): First check for `perl5', then for `perl'. Thanks again
-	to Roderik Muit.
-
-1999-02-24  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 1.0.0.
-
-	* LIBGTOP-VERSION: Set version number to 1.0.0 binary age 0,
-	interface age 0.
-
-	* configure.in: Require GLIB >= 1.2.0.
-
-1999-02-23  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.100.0.
-
-	Make the copyright of LibGTop be the GNU General Public License.
-
-	* LIBGTOP-VERSION: Set version number to 0.100.0 binary age 0,
-	interface age 0.
-
-	* copyright.txt: Set the year to 1998-99 and pretty-format it a
-	little bit. Same in all C source and header files.
-
-1999-02-21  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (LIBGTOP_*_INCS): Define `HAVE_GLIBTOP_MACHINE_H'
-	if appropriate.
-
-1999-02-19  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.99.9.
-
-	* LIBGTOP-VERSION: Set version number to 0.99.9 binary age 0,
-	interface age 0.
-
-	* include/glibtop/error.h: Don't include <glib.h>.
-	* sysdeps/common/error.c: Use `int' not `gint'.
-
-	* misc/porting-libgtop.txt: Added a few instructions on how
-	to port LibGTop to Solaris.
-
-	* Replace all __BEGIN_DELCS with LIBGTOP_BEGIN_DECLS and all
-	__END_DECLS with LIBGTOP_END_DECLS; remove all __P macros and
-	use real function prototypes.
-
-1999-02-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/*.h: Use glib-like function prototypes
-	instead of "extern <function> __P((args))".
-
-	* sysdeps/common/error.h: Replaced inline with static.
-
-1999-02-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* */*.awk: Replaced all awk scripts with perl scripts since it is
-	more likely that people have a working perl interpreter than GNU
-	awk on their system.
-
-1999-02-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* sysdeps/common/error.c (glibtop_error_r, glibtop_warn_r): Define
-	them as G_INLINE_FUNC in <glibtop/errno.h> if possible.
-	(glibtop_error_io_r, glibtop_warn_io_r): Likewise.
-	(glibtop_error_vr, glibtop_warn_vr): New functions taking a va_list.
-	(glibtop_error_io_vr, glibtop_warn_io_vr): New functions taking an
-	errno an a va_list.
-
-1999-02-17  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.99.8.
-
-1999-02-16  Martin Baulig  <martin@home-of-linux.org>
-
-	* examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am,
-	  sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am,
-	  sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am,
-	  sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am,
-	  sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am,
-	  sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am:
-	Initialize INCLUDES to `@INCLUDES@' to make it clear that it is
-	set in configure.in. It is ok to add things there, but you must
-	not remove the `@INCLUDES@'.
-
-1999-02-15  Jeff Garzik  <jgarzik@pobox.com>
-
-	* examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am,
-	  sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am,
-	  sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am,
-	  sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am,
-	  sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am,
-	  sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am:
-	Removed hardcoded gcc arguments from CFLAGS.
-
-	* include/glibtop/error.h:
-	Added FIXME comment about varargs macros breaking Sun cc
-	compilation.
-
-1999-02-12  Martin Baulig  <martin@home-of-linux.org>
-
-	Thanks to Frederic Devernay for pointing out that we need to define
-	__BEGIN_DECLS and __END_DECLS when not using GNOME.
-
-	* configure.in: Define `WITHOUT_GNOME' if appropriate.
-
-	* include/glibtop/global.h: Define __BEGIN_DECLS and __END_DECLS
-	when WITHOUT_GNOME not when _IN_LIBGTOP.
-
-1999-02-12  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/global.h: Applied patch from Frederic Devernay;
-	__BEGIN_DECLS and __END_DECLS are only defined inside _IN_LIBGTOP.
-
-1999-02-10  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (program_invocation_name): Check whether we need
- 	to declare this; some libc5 systems define that symbol but do
-	not declare it in any header file.
-
-1999-02-10  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop.spec.in, libgtop.spec: Replaced libgtop.spec with
-	with libgtop.spec.in, so libgtop.spec is now a generated file.
-
-1999-02-05  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/global.h: Enclose some of the stuff in this
-	file in `#ifdef _IN_LIBGTOP'.
-
-1999-02-04  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/global.h (_): Use dgettext (), not gettext ().
-
-1999-01-23  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtopConf.sh.in (LIBGTOP_DATADIR): New variable.
-
-1999-01-06  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4: Always enable SMP support for Linux.
-
-1999-01-03  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.99.2.
-
-1999-01-05  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop.spec: Always build SMP support; binary packages should
-	contain all possible features.
-
-	* configure.in: LibGTop will now require GLIB >= 1.1.12.
-	
-1999-01-05  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Make it abort if the `dc' utility is not installed.
-
-1999-01-03  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.99.1.
-
-1998-12-25  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (LIBGTOP_INCS): Define `HAVE_LIBGTOP_SMP' if SMP
-	support was enabled.
-
-1998-12-22  Yukihiro Nakai  <Nakai@TokyoNet.AD.JP>
-
-	* configure.in (ALL_LINGUAS): Added `ja'.
-
-1998-12-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* Makefile.am: Applied patch from Edward Jason Riedy to use '#'
-	as separator in sed commands.
-
-1998-12-15  Martin Baulig  <martin@home-of-linux.org>
-
-	Released LibGTop 0.99.0 which is a feature-freezed version
-	for GNOME 1.0.
-
-1998-12-09  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: We need to define LIBSUPPORT and SUPPORTINCS under
-	all circumstances as it is in gnome-libs.
-
-	* include/glibtop/procargs.h (glibtop_get_proc_args): Make the
-	return value a `char *' instead of a `const char *'.
-
-1998-12-09  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION: Set version number to 0.29.1.
-
-1998-12-09  Martin Baulig  <martin@home-of-linux.org>
-
-	* libgtop-sysdeps.m4: Moved here from the macros directory,
-	formerly known as `macros/gnome-libgtop-sysdeps.m4'.
-	(--enable-hacker-mode): New command line parameter to configure,
-	enables building of unstable sysdeps directories.
-	(LIBGTOP_HACKER_TESTS): New macro to check for unsafe things when
-	hacker mode was enabled.
-
-1998-12-06  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Make it abort if GNOME cannot be found and
-	the --without-gnome parameter was not given.
-
-1998-12-03  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Pipe the expression
-	through `dc' so we get a real number.
-
-1998-12-03  Martin Baulig  <martin@home-of-linux.org>
-
-	LibGTop now requires gettext >= 0.10.35.
-
-	* intl: Removed &intl CVS alias.
-
-1998-11-27  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION: Set version number to 0.29.0.
-
-	* TODO: Add things that need to be done before Dec 15.
-
-	This is basically a feature freeze for the C language part
-	of LibGTop except for things that are marked with (***) in
-	the TODO.
-
-1998-11-20  Martin Baulig  <baulig@merkur.uni-trier.de>
-
-	* sysdeps/common/mountlist.c: Applied a patch from Kenneth Stailey to
-	make it work on OpenBSD.
-
-1998-11-18  Martin Baulig  <martin@home-of-linux.org>
-
-	* lib/open.c (glibtop_open_l): We need to set argv[0] in call
-	to execl () to avoid a core dump in _init () on FreeBSD 3.0.
-
-1998-11-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/gnuserv.h (MCOOKIE_SCREEN): Don't define this
-	any longer, we now use the port the daemon is listening on instead
-	of a fixed screen.
-
-1998-11-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (--enable-debug): Define LIBGTOP_ENABLE_DEBUG
-	if this parameter is given.
-	(--enable-fatal-warnings): New parameter to make all warnings
-	fatal; define `LIBGTOP_FATAL_WARNINGS' if given.
-
-	* sysdeps/common/error.c (glibtop_error_r): Use abort () instead
-	of exit () if LIBGTOP_ENABLE_DEBUG.
-	(glibtop_error_io_r): Likewise.
-	(glibtop_warn_r): Call abort () if LIBGTOP_FATAL_WARNINGS.
-	(glibtop_warn_io_r): Likewise.
-
-	[NOTE: To get a core dump of the libgtop_server, you need to
-	remove all suid/sgid bits and invoke it as a priviledged user.]
-
-1998-11-08  Raja R Harinath  <harinath@cs.umn.edu>
-
-	* Makefile.am (support): Don't build if not BUILD_GNOME_SUPPORT.
-
-1998-11-02  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/parameter.h: Added `GLIBTOP_PARAM_REQUIRED'.
-
-	* lib/parameter.c (glibtop_set_parameter_l): It's no longer
-	allowed to set GLIBTOP_PARAM_FEATURES.
-	(glibtop_get_parameter_l): You can use `GLIBTOP_PARAM_REQUIRED'
-	to read server->required and ...
-	(glibtop_set_parameter_l): ... set it here.
-
-1998-10-26  Martin Baulig  <martin@home-of-linux.org>
-
-	Added `Network Load' feature (netload).
-
-	* include/glibtop/netload.h: New file.
-	* features.def: Added new feature `netload'.
-
-1998-10-26  Martin Baulig  <martin@home-of-linux.org>
-
-	Added `Command Line Parameters' feature (proc_args).
-
-	* include/glibtop/proc_args.h: New file.
-	* features.def: Added new feature `proc_args'.
-
-	* lib/lib.awk: New type `unsigned' for the features.def which
-	is `unsigned'.
-
-1998-10-25  Martin Baulig  <martin@home-of-linux.org>
-
-	Added PPP/ISDN support.
-
-	* include/glibtop/ppp.h: New file.
-	* features.def: Added new feature `ppp'.
-
-	* acconfig.h (HAVE_I4B): Defined if we have the I4B package.
-	(HAVE_I4B_ACCT): Defined if we have ISDN statistics with I4B.
-
-	* misc: New directory.
-	* misc/i4b_acct.txt: Read this file to get ISDN statistics on BSD.
-
-	* lib/lib.awk: New type `ushort' for the features.def which is
-	`unsigned short'.
-
-1998-10-20  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/proc_signal.h: Use a 2-element-array of
-	type `u_int64_t' for all signal masks instead of just
-	scalar numbers. This avoids problems on systems with more
-	than 64 signals.
-
-	If there is any operating system out there with even more than
-	128 signals, we can simply increase the number of array elements
-	here.
-
-	[NOTE for people porting libgtop:
-	
- 	 Please use all 64 bits of the `u_int64_t' and not just 32 - the
-	 signal number (as it is used in calls to kill () ...) should be
-	 a bit-index into this field; if a process ignores for instance
-	 signal 64, it has the 0-bit of sigcatch[1] set, if it ignores 63,
-	 this is the 63-bit of sigcatch[0] and so on ...
-
-	 The mapping between signal numbers and their names is done via the
-	 glibtop_sys_siglist [] field which should be declared in
-	 sysdeps/@sysdeps_dir@/siglist.c - see linux for an example.
-	]
-
-	* features.def: It's now safe to put things like `loadavg[3]'
-	here - the awk skripts should correctly threat this as an array.
-
-1998-10-12  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (GNOME_COMPILE_WARNINGS): Let the user enable
-	compiler warnings.
-	(--with-libgtop-guile): Make the default to build the guile
-	interface if guile can be found.
-
-	* Makefile.am (confexec_DATA): Install `feature.def' as
-	`libgtop-features.def'.
-	* libgtop.spec: Added `%{prefix}/lib/*.def' to the file list.
-
-1998-10-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Don't create `guile/Makefile'.
-	* Makefile.am (DIST_SUBDIRS): Removed.
-	(SUBDIRS): Removed `guile'.
-
-	* include/glibtop/*.h: Removed external delarations of all
-	`glibtop_guile_*' functions that were formerly defined in
-	sysdeps/guile/guile.c and sysdeps/guile/names/guile-names.c.
-
-1998-10-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* sysdeps/guile/ChangeLog: New file.
-
-	* LIBGTOP-VERSION: Set version number to 0.26.3.
-	* libgtop.spec: Likewise.
-
-	* Makefile.am (confexec_DATA): Added `features.def'.
-	* libgtop-config.in: Added `--features-def-file' parameter
-	to get pathname of installed `features.def' file.
-
-	* perl: Removed everything in this subdirectory. This was
-	only experimental. The real perl bindings for LibGTop are
-	in the libgtop-bindings module.
-
-1998-10-11  Martin Baulig  <martin@home-of-linux.org>
-
-	* src/inodedb/Makefile.am: Removed @libs_xauth@ and -lgdbm
-	from the _LDADD variables since libtool automatically gets
-	the dependencies.
-	* src/daemon/Makefile.am: Likewise.
-	* examples/Makefile.am: Likewise.
-
-1998-10-10  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure (LIBGTOP_EXTRA_LIBS): Added `GLIB_LIBS'.
-
-	* perl/ChangeLog: New file.
-
-1998-10-07  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in (ALL_LINGUAS): Added `de'.
-
-1998-10-03  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/global.h: Only include system header files
-	if we are `_IN_LIBGTOP'.
-	(G_GNUC_NORETURN, G_GNUC_CONST, G_GNUC_UNUSED): Added those
-	definitions if we are `_IN_LIBGTOP'.
-
-1998-09-29  Sung-Hyun Nam  <namsh@lgic.co.kr>
-
-	* configure.in (ALL_LINGUAS): add `ko'
-	* po/ko.po: new file.
-
-1998-09-27  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Make it really *require* GLIB >= 1.1.3.
-
-1998-09-27  Raja R Harinath  <harinath@cs.umn.edu>
-
-	* configure.in: Move check for `-lresolv', `-lsocket' and `-lnsl'
-	after X11 checks.
-
-1998-09-27  Martin Baulig  <martin@home-of-linux.org>
-
-	* configure.in: Do not even check for guile if it is disabled.
-
-1998-09-12  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/sysinfo.h: New file. This is used in guname to
-	fetch as many information about the system as possible like detailed
-	information about hardware etc.
-
-	* configure.in (AM_PATH_GLIB): LibGTop now requires glib.
-
-1998-09-09  Martin Baulig <baulig@Stud.Informatik.uni-trier.de>
-
-	* include/glibtop/proctime.h (glibtop_proc_time): Added `xcpu_utime'
- 	and `xcpu_stime'.
-
-	* sysdeps/linux/ChangeLog: New file.
-
-	* glibtop.h (glibtop): Added `ncpu'. This is zero for single processor
-	systems and the number of CPUs otherwise.
-
-	* include/glibtop/cpu.h (glibtop_cpu): Added `xcpu_total', `xcpu_user',
-	`xcpu_nice', `xcpu_sys' and `xcpu_idle'.
-	(GLIBTOP_NCPU): #define this to 4.
-
-1998-09-08  Martin Baulig  <baulig@merkur.uni-trier.de>
-
-	* configure.in: Make the default to disable guile.
-
-1998-08-30  Martin Baulig  <martin@home-of-linux.org>
-
-	* LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Added. This is a numerical
-	constant ("1.234.567" -> 1234567) to be used in C preprocessor
-	conditionals.
-
 1998-08-29  Martin Baulig  <martin@home-of-linux.org>
 
 	* LIBGTOP-VERSION (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): Added.
@@ -748,17 +5,6 @@
 	(LT_RELEASE, LT_CURRENT, LT_REVISION, LT_AGE): AC_SUBST.
 	(LT_VERSION_INFO): Sets `-version-info' for libtool.
 
-	* */Makefile.am: We now use the correct `-version-info' parameter
-	for libtool.
-
-1998-08-25  Martin Baulig  <martin@home-of-linux.org>
-
-	* include/glibtop/command.h (glibtop_call): Third argument is
-	now `const void *'.
-
-	* include/glibtop/xmalloc.h (glibtop_free): Now taking a
-	`const void *'.
-
 1998-08-25  Martin Baulig  <martin@home-of-linux.org>
 
 	* src/daemon/ChangeLog: New file.

LIBGTOP-VERSION

@@ -6,24 +6,18 @@
 # if backwards compatibility has been broken,
 # set LIBGTOP_BINARY_AGE and LIBGTOP_INTERFACE_AGE to 0.
 #
-LIBGTOP_MAJOR_VERSION=1
-LIBGTOP_MINOR_VERSION=1
-LIBGTOP_MICRO_VERSION=2
+LIBGTOP_MAJOR_VERSION=0
+LIBGTOP_MINOR_VERSION=25
+LIBGTOP_MICRO_VERSION=1
 
-# you can set this to `-snap' for instance to create
-# a `libgtop-1.x.y-snap.tar.gz' tarball.
-LIBGTOP_VERSION_SUFFIX=.1-solaris
+LIBGTOP_INTERFACE_AGE=0
+LIBGTOP_BINARY_AGE=0
 
-LIBGTOP_INTERFACE_AGE=2
-LIBGTOP_BINARY_AGE=2
+LIBGTOP_VERSION=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION.$LIBGTOP_MICRO_VERSION
 
 # Increase each time you change the client/server protocol.
-LIBGTOP_SERVER_VERSION=50
-
-# Don't change this
-LIBGTOP_VERSION=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION.$LIBGTOP_MICRO_VERSION
-LIBGTOP_VERSION_CODE=`echo "$LIBGTOP_MAJOR_VERSION 1000000 * $LIBGTOP_MINOR_VERSION 1000 * + $LIBGTOP_MICRO_VERSION + p q" | dc`
+LIBGTOP_SERVER_VERSION=1
 
 # For automake.
-VERSION=$LIBGTOP_VERSION$LIBGTOP_VERSION_SUFFIX
+VERSION=$LIBGTOP_VERSION
 PACKAGE=libgtop

Makefile.am

@@ -6,95 +6,101 @@ else
 examples_SUBDIRS =
 endif
 
-if BUILD_GNOME_SUPPORT
-support = support
+if GUILE
+guile_SUBDIRS = guile
+else
+guile_SUBDIRS =
 endif
 
-SUBDIRS = po intl $(support) macros misc include sysdeps lib src \
-	  $(examples_SUBDIRS) doc
+
+SUBDIRS = po intl support macros include sysdeps lib src \
+	  $(examples_SUBDIRS)
+
+DIST_SUBDIRS = po intl support macros include sysdeps src lib guile examples
 
 include_HEADERS = glibtop.h
-configincludedir = $(pkglibdir)/include
 
-EXTRA_DIST = autogen.sh libgtop.spec.in copyright.txt libgtopConf.sh.in \
-	LIBGTOP-VERSION features.def libgtop-config.in RELNOTES-0.25 \
-	RELNOTES-1.0 RELNOTES-1.1.x libgtop-sysdeps.m4 README \
-	libgtop-mirror.sh
-
-configinclude_DATA = \
-	glibtop-config.h
-
-BUILT_SOURCES = stamp-gc-h #note: not glibtop-config.h
-glibtop-config.h: stamp-gc-h
-	@:
-stamp-gc-h: config.status
-	CONFIG_FILES= CONFIG_HEADERS= CONFIG_OTHER=glibtop-config.h ./config.status
-	echo timestamp > stamp-gc-h
-
-dist-hook: libgtop.spec
-	cp libgtop.spec $(distdir)
+EXTRA_DIST = autogen.sh libgtop.spec copyright.txt libgtopConf.sh.in \
+	LIBGTOP-VERSION features.def perl/Makefile.PL.in perl/perl.awk \
+	perl/MANIFEST perl/Changes libgtop-config.in RELNOTES-0.25
 
 release:
-	$(MAKE) dist distdir=$(PACKAGE)-$(VERSION)
+	$(MAKE) dist distdir=$(PACKAGE)$(VERSION)
 
 ## Put `exec' in the name because this should be installed by
 ## `install-exec', not `install-data'.
-confexecdir	= $(libdir)
-confexec_DATA	= $(top_builddir)/libgtopConf.sh \
-		  $(top_builddir)/libgtop-features.def
-
-CLEANFILES=libgtopConf.sh
+confexecdir=$(libdir)
+confexec_DATA = $(top_builddir)/libgtopConf.sh
 
 bin_SCRIPTS = $(top_builddir)/libgtop-config
 
+noinst_DATA = $(top_builddir)/perl/Makefile.PL \
+		$(top_builddir)/perl/Libgtop.xs
+
 ## to automatically rebuild aclocal.m4 if any of the macros in
 ## `macros/' change
-@MAINT@ include macros/macros.dep
+@MAINT@include macros/macros.dep
 @MAINT@macros/macros.dep: macros/Makefile.am
 @MAINT@	cd macros && $(MAKE) macros.dep
 
-@MAINT@$(top_srcdir)/aclocal.m4: libgtop-sysdeps.m4 LIBGTOP-VERSION
-
 ## We create libgtopConf.sh here and not from configure because we want
 ## to get the paths expanded correctly.  Macros like srcdir are given
 ## the value NONE in configure if the user doesn't specify them (this
 ## is an autoconf feature, not a bug).
 libgtopConf.sh: libgtopConf.sh.in Makefile
 ## Use sed and then mv to avoid problems if the user interrupts.
-	sed -e 's#\@LIBGTOP_LIBDIR\@#$(libdir)#g' \
-	  -e 's#\@LIBGTOP_INCLUDEDIR\@#$(includedir)#g' \
-	  -e 's#\@LIBGTOP_DATADIR\@#$(datadir)#g' \
-	  -e 's#\@LIBGTOP_EXTRA_LIBS\@#$(LIBGTOP_EXTRA_LIBS)#g' \
-	  -e 's#\@LIBGTOP_LIBS\@#$(LIBGTOP_LIBS)#g' \
-	  -e 's#\@LIBGTOP_INCS\@#$(LIBGTOP_INCS)#g' \
-	  -e 's#\@LIBGTOP_NAMES_LIBS\@#$(LIBGTOP_NAMES_LIBS)#g' \
-	  -e 's#\@LIBGTOP_NAMES_INCS\@#$(LIBGTOP_NAMES_INCS)#g' \
-	  -e 's#\@LIBGTOP_GUILE_LIBS\@#$(LIBGTOP_GUILE_LIBS)#g' \
-	  -e 's#\@LIBGTOP_GUILE_INCS\@#$(LIBGTOP_GUILE_INCS)#g' \
-	  -e 's#\@LIBGTOP_GUILE_NAMES_LIBS\@#$(LIBGTOP_GUILE_NAMES_LIBS)#g' \
-	  -e 's#\@LIBGTOP_GUILE_NAMES_INCS\@#$(LIBGTOP_GUILE_NAMES_INCS)#g' \
-	  -e 's#\@LIBGTOP_BINDIR\@#$(LIBGTOP_BINDIR)#g' \
-	  -e 's#\@LIBGTOP_SERVER\@#$(LIBGTOP_SERVER)#g' \
-	  -e 's#\@LIBGTOP_MAJOR_VERSION\@#$(LIBGTOP_MAJOR_VERSION)#g' \
-	  -e 's#\@LIBGTOP_MINOR_VERSION\@#$(LIBGTOP_MINOR_VERSION)#g' \
-	  -e 's#\@LIBGTOP_MICRO_VERSION\@#$(LIBGTOP_MICRO_VERSION)#g' \
-	  -e 's#\@LIBGTOP_VERSION\@#$(LIBGTOP_VERSION)#g' \
-	  -e 's#\@LIBGTOP_VERSION_CODE\@#$(LIBGTOP_VERSION_CODE)#g' \
-	  -e 's#\@LIBGTOP_SERVER_VERSION\@#$(LIBGTOP_SERVER_VERSION)#g' \
-	  -e 's#\@libgtop_sysdeps_dir\@#$(libgtop_sysdeps_dir)#g' \
-	  -e 's#\@libgtop_need_server\@#$(libgtop_need_server)#g' \
-	  -e 's#\@libgtop_use_machine_h\@#$(libgtop_use_machine_h)#g' \
-	  -e 's#\@libgtop_guile_found\@#$(libgtop_guile_found)#g' \
-	  -e 's#\@libgtop_want_examples\@#$(libgtop_want_examples)#g' \
+	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
+	    -e 's,\@LIBGTOP_INCLUDEDIR\@,$(includedir),g' \
+	    -e 's,\@LIBGTOP_EXTRA_LIBS\@,$(LIBGTOP_EXTRA_LIBS),g' \
+	    -e 's,\@LIBGTOP_LIBS\@,$(LIBGTOP_LIBS),g' \
+	    -e 's,\@LIBGTOP_INCS\@,$(LIBGTOP_INCS),g' \
+	    -e 's,\@LIBGTOP_NAMES_LIBS\@,$(LIBGTOP_NAMES_LIBS),g' \
+	    -e 's,\@LIBGTOP_NAMES_INCS\@,$(LIBGTOP_NAMES_INCS),g' \
+	    -e 's,\@LIBGTOP_GUILE_LIBS\@,$(LIBGTOP_GUILE_LIBS),g' \
+	    -e 's,\@LIBGTOP_GUILE_INCS\@,$(LIBGTOP_GUILE_INCS),g' \
+	    -e 's,\@LIBGTOP_GUILE_NAMES_LIBS\@,$(LIBGTOP_GUILE_NAMES_LIBS),g' \
+	    -e 's,\@LIBGTOP_GUILE_NAMES_INCS\@,$(LIBGTOP_GUILE_NAMES_INCS),g' \
+	    -e 's,\@LIBGTOP_BINDIR\@,$(LIBGTOP_BINDIR),g' \
+	    -e 's,\@LIBGTOP_SERVER\@,$(LIBGTOP_SERVER),g' \
+	    -e 's,\@LIBGTOP_MAJOR_VERSION\@,$(LIBGTOP_MAJOR_VERSION),g' \
+	    -e 's,\@LIBGTOP_MINOR_VERSION\@,$(LIBGTOP_MINOR_VERSION),g' \
+	    -e 's,\@LIBGTOP_MICRO_VERSION\@,$(LIBGTOP_MICRO_VERSION),g' \
+	    -e 's,\@LIBGTOP_VERSION\@,$(LIBGTOP_VERSION),g' \
+	    -e 's,\@LIBGTOP_SERVER_VERSION\@,$(LIBGTOP_SERVER_VERSION),g' \
+	    -e 's,\@libgtop_sysdeps_dir\@,$(libgtop_sysdeps_dir),g' \
+	    -e 's,\@libgtop_need_server\@,$(libgtop_need_server),g' \
+	    -e 's,\@libgtop_use_machine_h\@,$(libgtop_use_machine_h),g' \
+	    -e 's,\@libgtop_guile_found\@,$(libgtop_guile_found),g' \
+	    -e 's,\@libgtop_want_examples\@,$(libgtop_want_examples),g' \
 	      < $(srcdir)/libgtopConf.sh.in > libgtopConf.tmp \
 	  && mv libgtopConf.tmp libgtopConf.sh
 
 libgtop-config: libgtop-config.in Makefile
-	sed -e 's#\@LIBGTOP_LIBDIR\@#$(libdir)#g' \
+	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
 	      < $(srcdir)/libgtop-config.in > libgtop-config.tmp \
 	  && mv libgtop-config.tmp libgtop-config && \
 		chmod 755 libgtop-config
 
-libgtop-features.def: features.def
-	@LN_S@ $< $@
+perl/Makefile.PL: perl/Makefile.PL.in Makefile
+## Use sed and then mv to avoid problems if the user interrupts.
+	sed -e 's,\@LIBGTOP_LIBDIR\@,$(libdir),g' \
+	    -e 's,\@LIBGTOP_INCLUDEDIR\@,$(includedir),g' \
+	    -e 's,\@LIBGTOP_LIBS\@,$(LIBGTOP_LIBS),g' \
+	    -e 's,\@LIBGTOP_INCS\@,$(LIBGTOP_INCS),g' \
+	    -e 's,\@LIBGTOP_GUILE_LIBS\@,$(LIBGTOP_GUILE_LIBS),g' \
+	    -e 's,\@LIBGTOP_GUILE_INCS\@,$(LIBGTOP_GUILE_INCS),g' \
+	    -e 's,\@LIBGTOP_BINDIR\@,$(LIBGTOP_BINDIR),g' \
+	    -e 's,\@LIBGTOP_SERVER\@,$(LIBGTOP_SERVER),g' \
+	    -e 's,\@libgtop_sysdeps_dir\@,$(libgtop_sysdeps_dir),g' \
+	    -e 's,\@libgtop_need_server\@,$(libgtop_need_server),g' \
+	    -e 's,\@libgtop_use_machine_h\@,$(libgtop_use_machine_h),g' \
+	    -e 's,\@libgtop_guile_found\@,$(libgtop_guile_found),g' \
+	    -e 's,\@libgtop_want_names\@,$(libgtop_want_names),g' \
+	    -e 's,\@libgtop_want_guile_names\@,$(libgtop_want_guile_names),g' \
+	    -e 's,\@libgtop_want_examples\@,$(libgtop_want_examples),g' \
+	      < $(srcdir)/perl/Makefile.PL.in > perl/Makefile.tmp \
+	  && mv perl/Makefile.tmp perl/Makefile.PL
 
+perl/Libgtop.xs: perl/perl.awk $(top_builddir)/config.h $(top_srcdir)/features.def
+	$(AWK) -f $(top_srcdir)/perl/perl.awk < $(top_srcdir)/features.def > perl/lgt-t
+	mv perl/lgt-t perl/Libgtop.xs

NEWS

@@ -1,16 +1,244 @@
-February 16, 2000:
-=================
+$Id$
 
-* Released LibGTop 1.1.2.1 "Hardangervidda goes Paris"
+Jun/01/1998
+===========
 
-  This is a bug fixed version of 1.1.2 for Solaris users
-  of the GUADEC CD.
+	* We have some new ``suffix rules'':
 
-October 19, 1999:
-================
+	  '__l' is a function defined in the client part;
+	  '__s' is a function defined in the sysdeps part and
+	  '__p' is a function that needs special priviledges.
+	  '__r' is mapped either on '__p' or on '__s'.
+	  the function without suffix is mapped on '__l'.
 
-* Released LibGTop 1.1.2 "Hardangervidda"
+	* We now decide at runtime whether or not using the server
+	is required for a particular function. All user programs
+	now call the '__l' function defined in '-lgtop' (in the lib
+	subdir). These functions either use 'glibtop_call__l' to
+	call the server or call the '__r' function.
 
-  This is a stable release from the development branch
-  of LibGTop for Solaris users of October GNOME.
+	* A function in the sysdeps directory now has the '__s' suffix
+	if it do not need any priviledges (and thus can be called directly
+	from client code) and the '__p' suffix otherwise (when it has to
+	be called from the server).
 
+	* If you call one of these functions:
+
+	  -> use the '__p' suffix to be sure to get the SUID-safe one
+	     (used in the server).
+	  -> use the '__s' suffix to be sure to get a function that
+	     doesn't need any priviledges.
+	  -> use the '__r' suffix otherwise (it is mapped either on the
+	     '__p' or on the '__s' one).
+
+	Only use the '__p' and '__s' functions in a 'GLIBTOP_SUID_<feature>'
+	conditional, otherwise you'll get undefined symbols !
+
+	* The server is now started from 'glibtop_init__r', but only when
+	it's really needed; for instance on DEC OSF/1 you only need it
+	for the proc* features - if you program only fetches the CPU usage,
+	now server will be started.
+
+	* Sorry, at the moment everything is a little bit unstable, I'm doing
+	heavy changes. I've just some great ideas which still need some work:
+
+	  -> I want to have a SUID server that only implements those features
+	     that need to be SUID; everything else uses the sysdeps code directly.
+
+	  -> If a program only uses stuff that do not need the server, the
+	     server will not be started at all.
+
+	  -> I'm working on some kind of proxy server that can be used on a remote
+	     host; in feature one can then use the MDI stuff from ghex in gtop to
+	     have notebook pages displaying processes from different hosts.
+
+	* Well it is as much unstable that it only works under Linux at the moment.
+
+1998-06-01  Martin Baulig  <martin@home-of-linux.org>
+
+	* sysdeps/common/sysdeps.c: now using '__r' functions,
+	they are #defined either as the '__p' or the '__s' ones.
+
+	* sysdeps/linux/*.c: changed call of 'glibtop_init__r',
+	it now takes two additional arguments.
+
+	* examples/{first.c, second.c}: now using 'glibtop_init'
+	instead of 'glibtop_init__r'.
+
+	* include/glibtop/sysdeps.h: added 'dummy' member so
+	'GLIBTOP_SYSDEPS_<feature>' now start with 1.
+
+	* include/glibtop/*.h: we now #define 'glibtop_get_<feature>'
+	as 'glibtop_get_<feature>__l' and 'glibtop_get_<feature>__r'
+	either as the '__p' or the '__s' function.
+
+	* lib/*.c: removed #if's - we now decide at runtime
+	whether to use the server or to call the appropriate
+	function for the sysdeps directory.
+
+1998-05-28  Martin Baulig  <baulig@merkur.uni-trier.de>
+
+	* src/server/main.c: we now use the '__p' functions,
+	but only if the appropriate 'GLIBTOP_SUID_<feature>'
+	has a non-zero value.
+	
+	* configure.in (@machine_incs@): always use 
+	`-I$(top_srcdir)/sysdeps/@sysdeps_dir@'; it's no
+	longer conditional.
+
+	* examples/Makefile.am: removed the '_linux' examples.
+	
+	* sysdeps/linux/*.c: renamed all functions implementing
+	features to '__s'.
+	
+	* lib/*.c: renamed all functions implementing features
+	to '__l'; we only emit code for those functions if the
+ 	corresponding 'GLIBTOP_SUID_<feature>' has a positive value.
+	
+	* include/glibtop/*.h: added some new function suffixes:
+	'__l' is a function defined in the client part;
+	'__s' is a function defined in the sysdeps part and
+	'__p' is a function that needs special priviledges.
+	'__r' is mapped either on '__l' or on '__s'.
+	
+	* sysdeps/linux/glibtop_server.h: New file -
+	defines system dependent constants 'GLIBTOP_SUID_<feature>'
+	being either 'GLIBTOP_SYSDEPS_<feature>'+1 depending upon
+ 	whether or not this feature requires using the server.
+
+	* lib/sysdeps.c: removed that file; it is no longer
+	needed.
+
+
+
+May/21/1998
+===========
+
+* doc/gnome-hackers.sgml: This is a short intro on how to use libgtop
+  in the GNOME project. It covers especially the use of its 'configure'
+  script and the automatically generated 'gtopConf.sh'.
+
+May/20/1998
+===========
+
+* 'gtopConf.sh' now defines 'GTOP_LIBS' and 'GTOP_INCS' in a manner
+  that they contain everything that is needed to link some program with
+  libgtop. It will use '-lgtop' only if the server is really needed and
+  '-lgtop_sysdeps' otherwise;
+
+* 'gtopConf.sh' additionally defines 'GTOP_GUILE_LIBS' and 'GTOP_GUILE_INCS'
+  containing everything that is needed to link some program both with
+  libgtop and its guile interface. They are identically to 'GTOP_LIBS'
+  and 'GTOP_INCS' if building the guile interface is disabled or guile
+  cannot be found on the system.
+
+* 'configure' takes additional arguments '--enable-libgtop-server' and
+  '--disable-libgtop-server' to use the server even when it's not needed
+  or to disable it's use where it's needed.
+
+* 'configure' takes an argument '--without-libgtop-guile' to disable
+  guile support.
+
+* 'configure takes an argument '--without-libgtop-names' to remove
+  '-lgtop_names' (and '-lgtop_guile_names' when we have guile) from
+  'GTOP_LIBS'; in this case these libraries are not even built.
+
+May/19/1998
+===========
+
+* Libgtop is now in the GNOME CVS Repository.
+
+May/17/1998
+===========
+
+* we have now 'const char *glibtop_types_* []' consisting
+  of the C types of the corresponding files of '_glibtop_*'.
+
+* added guile function '(glibtop-types-*)' and '(glibtop-descriptions-*)'.
+
+May/10/1998
+===========
+
+* Port to DEC OSF1 3.0 has been made:
+
+  cpu		(total, user, nice, sys, idle)
+  mem		(total, used, free)
+
+  loadavg	(loadavg)
+  uptime	(uptime)
+
+  msg_limits	(map, max, mnb, mni, tql)
+  sem_limits	(mni, msl, opm, vmx, aem)
+  shm_limits	(max, min, mni, seg)
+
+  The following need the server to be SUID root:
+
+  proclist	(total, number, size)
+  procdata	(cmd, state, uid, pid, ppid, pgrp, tty, k_flags,
+		 session, tpgid, sigignore, sigcatch, signal, nice, 
+		 priority, resident, rss, vsize, utime, stime,
+		 cutime, cstime, trs, drs)
+
+May/07/1998
+===========
+
+* 'flags' member of sysdeps/linux/procdata.c is now
+  'unsigned long flags [2]'.
+
+* When we give glibtop_get_procdata () a pid of zero, only
+  the flags are returned.
+
+* We now use static constants instead of #defines for sysdeps flags.
+
+May/03/1998
+===========
+
+* VPATH-Build now working; sometimes it's necessary to copy
+  $(top_srcdir)/po/cat-id-tbl.c to $(top_builddir)/po.
+
+* The library has been tested on the following systems:
+
+  - i686-pc-linux-gnu
+  - sparc-sun-sunos4.1.1
+  - alpha-dec-osf1 (that's DEC OSF1 3.0 and 3.2)
+
+* Compilation has been tested on the following systems (I have no root
+  access there and cannot test the library because of this):
+
+  - sparc-sun-solaris2
+  - i386-bsdi
+
+* Does no longer require Gnome.
+
+* Guile-Parts are compiled only if guile can be found.
+
+* Some of the executables are statically linked to copy them more easily
+  between machines.
+
+May/02/1998
+===========
+
+ * Global changes to the interfaces, all functions except glibtop_open()
+   and glibtop_close() that took a server argument have now a '__r' suffix;
+   the original name is now a macro that uses glibtop_global_server.
+
+Apr/10/1998
+===========
+Added new directory sysdeps/guile/names. It is the guile interface
+to the gtop_names library found in sysdeps/names. Changed
+GLIBTOP_DESCRIPTIONS to GLIBTOP_NAMES and added GLIBTOP_GUILE_NAMES
+to the header files.
+
+Apr/09/1998
+===========
+Added new directories guile and names to sysdeps. In names are
+some string constants about the data stored in the structures.
+guile is a guile interface for the library. It is used in
+examples/third (which has been completely rewritten).
+The header files define things from names when GLIBTOP_DESCRIPTIONS
+if defined and/or from guile when HAVE_GUILE is defined.
+
+Apr/08/1998
+===========
+
+Added guile wrapper for the library (see examples/third).

README

@@ -0,0 +1,57 @@
+Hi all,
+
+[PLEASE READ THE FILE ``README.LATEST'' FOR LATEST NEWS]
+
+this is the latest alpha version of libgtop, a library that fetches
+information about the running system such as cpu and memory usage,
+active processes etc. On Linux systems, these information are taken
+directly from the /proc filesystem. For other systems such as Solaris,
+where such programs need to be suid root (or only setgid kmem/mem on
+some systems), it provides a suid/setgid server that fetches those
+information and a client-side library that talks to this server.
+
+Main idea was to have the same interface for all operating systems,
+thus all system dependent details are hidden in the implementation
+of that server.
+
+Currently, it only works for Linux, documentation on how to port it
+to other systems is on the way. I'm planning to keep this site an
+up-to-date mirror of my local machine (which is connected to the
+internet over some expensive dialup connection, so I'll upload it about
+once every day I made significant changes) so that you can always find
+the latest version of the software here.
+
+I've written a simple guile interface for the library to show which
+information it can already fetch. See examples/third for details.
+
+Source Code:
+===========
+
+   libgtop-current-cvs.cpio.gz     is a cpio archive from the CVS repository
+   libgtop-current.cpio.gz         contains the lates checked out sources
+   libgtop-stable.cpio.gz          if present, it contains the last stable release
+
+Documentation:
+=============
+
+   libgtop.sgml                    is the SGML source of the (DocBook) documentation
+
+The next three files are only provided until they get too big to upload.
+
+   libgtop.tex                     TEX file of the documentation
+   libgtop.dvi                     DVI file of the documentation
+   libgtop.ps                      Postscript file of the documentation
+
+HTML-Documentation:
+==================
+
+   libgtop.shtml                   Start here to browse the HTML documentation
+
+Other stuff:
+===========
+
+   README, NEWS, ChangeLog         copied from the sources
+
+Enjoy it!
+
+Martin (martin@home-of-linux.org - baulig@merkur.uni-trier.de)

README.LATEST

@@ -0,0 +1,8 @@
+$Id$
+
+LATEST NEWS:
+===========
+
+Please look also in the file 'NEWS' for latest news.
+ 
+Martin

RELNOTES-0.25

@@ -0,0 +1,146 @@
+RELEASE NOTES FOR LIBGTOP 0.25 STABLE
+=====================================
+
+OVERVIEW
+--------
+
+LibGTop is a library that read information about processes and the running
+systems. This information include:
+
+General System Information
+
+cpu		- CPU Usage
+mem		- Memory Usage
+swap		- Swap Usage (including paging activity)
+loadavg		- Load average (including nr_running, nr_tasks, last_pid)
+uptime		- Uptime and Idle time, can be calculated from CPU usage
+
+SYS V IPC Limits:
+
+shm_limits	- Shared Memory Limits
+msg_limits	- Message Queue Limits
+sem_limits	- Semaphore Set Limits
+
+Process List:
+
+proclist	- List of processes
+
+Process information:
+
+proc_state	- cmd, state, uid, gid
+proc_uid	- uid,euid,gid,egid,pid,ppid,pgrp
+		  session,tty,tpgid,priority,nice
+proc_mem	- size,vsize,resident,share,rss,rss_rlim
+proc_time	- start_time,rtime,utime,stime,cutime,cstime
+		  timeout,it_real_value,frequency
+proc_signal	- signal,blocked,sigignore,sigcatch
+proc_kernel	- k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt
+		  kstk_esp,kstk_eip,nwchan,wchan
+proc_segment	- text_rss,shlib_rss,data_rss,stack_rss,dirty_size
+		  start_code,end_code,start_stack
+
+Process maps:
+
+proc_map	- Process map (/proc/<pid>/maps under Linux)
+
+File system usage:
+
+mountlist	- List of currently mounted filesystems
+fsusage		- File system usage
+
+PORTABILITY:
+-----------
+
+LibGtop is designed to be as portable as possible. None of the functions
+and retrieved information should be specific to a specific operating
+system. So you only need to port the system dependent part of the library
+to a new system and all application programs can then use libgtop on this
+new system.
+
+CLIENT/SERVER MODEL:
+-------------------
+
+Some systems like DEC OSF/1 or BSD require special priviledges for the calling
+proces to fetch the required information (SUID root/SGID kmem). To solve this
+problem, I designed a client/server model which makes a call to a SUID/SGID
+server which fetches the required information whenever it is required. This
+server is only called for features that really require priviledges, otherwise
+the sysdeps code is called directory (every user can get the CPU usage on
+DEC OSF/1, but only root can get information about processes other than the
+current one).
+
+There is also some kind of daemon which can be used to fetch information from
+remote systems (still experimental). This daemon normally runs as nobody and
+calls the SUID/SGID itself when needed.
+
+GNOME APPLETS:
+--------------
+
+There are some applets and applications which already use LibGTop. They can
+be found in the `libgtop-apps' module in the GNOME CVS tree:
+
+* Applets:  cpuload, cpumemusage - they need LibGTop to get their information
+                                   on all systems other than Linux.
+
+* Applets:  diskusage - just uses the mountlist/fsusage features of LibGTop,
+                        the one in gnome-core also works on other systems.
+
+* Applets:  multiload - I enhanced the cpuload applet a little bit, it is
+                        now a multi applet and can display CPU, Memory and
+                        Swap usages.
+
+GTOP:
+----
+
+This cool GNOME app has been ported to use LibGTop. It can be found in
+`libgtop-apps/gtop' in the GNOME CVS tree.
+
+You can now use nearly the full functionality of GTop on FreeBSD !
+
+
+PLATTFORM SPECIFIC NOTES FOR LINUX:
+==================================
+
+Under Linux, LibGTop should work without problems and read everything
+from /proc.
+
+There is also an experimental kernel interface to read this information
+directly from the kernel with a system call - but this is still experimental
+and not well tested while I made this release.
+
+PLATTFORM SPECIFIC NOTES FOR FREEBSD:
+====================================
+
+LibGTop should now work under FreeBSD and give you the full functionality
+of GTop.
+
+There are a few caveats:
+
+* You need to manually make the `$(prefix)/bin/libgtop_server' SGID to kmem
+  after installation and mount the /proc filesystem of FreeBSD
+  (/proc/<pid>/mem is used withing kvm_uread ()).
+
+* To get the filenames of the process maps displayed in GTop, you need to
+  configure with the `--with-libgtop-inodedb' option (you need GDBM for this
+  to work).
+
+* You have then to create an inode database which is used to look up to
+  filenames. This is done using the `mkinodedb' program which comes along
+  with libgtop.
+
+  See the file src/inodedb/README for details:
+
+  The `mkinodedb' program which is build in this directory takes two
+  command line arguments: the full pathname of the database to be created
+  and the name of a configuration file consisting of directory and file names
+  each on a line by itself - see `/etc/ld.so.conf' for an example.
+
+  Putting a directory name in this file means all regular files found in this
+  directory are included in the database, but it will not recursively descend
+  into subdirectories (for instance, we want everythink in `/usr/lib' but not
+  every single file in `/usr/lib/sgml'). You can also use filenames to include
+  a single file.
+
+Have fun,
+
+Martin <martin@home-of-linux.org>

acconfig.h

@@ -0,0 +1,142 @@
+
+/* Define if gethostname () must be declared. */
+#undef NEED_DECLARATION_GETHOSTNAME
+
+/* Define if setreuid () must be declared. */
+#undef NEED_DECLARATION_SETREUID
+
+/* Define if setregid () must be declared. */
+#undef NEED_DECLARATION_SETREGID
+
+/* Define if getpagesize () must be declared. */
+#undef NEED_DECLARATION_GETPAGESIZE
+
+@TOP@
+
+#undef ENABLE_NLS
+#undef HAVE_CATGETS
+#undef HAVE_GETTEXT
+#undef HAVE_LC_MESSAGES
+#undef HAVE_STPCPY
+#undef HAVE_STRUCT_OSOCKADDR
+#undef PACKAGE
+#undef VERSION
+#undef HAVE_LIBSM
+#undef HAVE_LIBINTL_H
+#undef HAVE_GTK_SIGNAL_HANDLER_PENDING
+
+/* Do not remove this comments and the empty lines; they are needed */
+#undef HAVE_PROGRAM_INVOCATION_SHORT_NAME
+/* Define if you have the Andrew File System.  */
+#undef AFS
+
+/* Define one of the following to indicate how a program can
+   get a list of mounted filesystems.  */
+
+/* Define if there is no specific function for reading the list of
+   mounted filesystems.  fread will be used to read /etc/mnttab.  [SVR2]  */
+#undef MOUNTED_FREAD
+
+/* Define if (like SVR2) there is no specific function for reading the
+   list of mounted filesystems, and your system has these header files:
+   <sys/fstyp.h> and <sys/statfs.h>.  [SVR3]  */
+#undef MOUNTED_FREAD_FSTYP
+
+/* Define if there is a function named getfsstat for reading the list
+   of mounted filesystems.  [DEC Alpha running OSF/1]  */
+#undef MOUNTED_GETFSSTAT
+
+/* Define if there is a function named getmnt for reading the list of
+   mounted filesystems.  [Ultrix]  */
+#undef MOUNTED_GETMNT
+
+/* Define if there is a function named getmntent for reading the list
+   of mounted filesystems, and that function takes a single argument.
+   [4.3BSD, SunOS, HP-UX, Dynix, Irix]  */
+#undef MOUNTED_GETMNTENT1
+
+/* Define if there is a function named getmntent for reading the list of
+   mounted filesystems, and that function takes two arguments.  [SVR4]  */
+#undef MOUNTED_GETMNTENT2
+
+/* Define if there is a function named getmntinfo for reading the list
+   of mounted filesystems.  [4.4BSD]  */
+#undef MOUNTED_GETMNTINFO
+
+/* Define if there is a function named listmntent that can be used to
+   list all mounted filesystems. [UNICOS] */
+#undef MOUNTED_LISTMNTENT
+
+/* Define if there is a function named mntctl that can be used to read
+   the list of mounted filesystems, and there is a system header file
+   that declares `struct vmount.'  [AIX]  */
+#undef MOUNTED_VMOUNT
+
+/* Define one of the following to indicate how a program can obtain
+   filesystems usage information.  */
+
+/*  Define if  statfs takes 3 args.  [DEC Alpha running OSF/1]  */
+#undef STAT_STATFS3_OSF1
+
+/* Define if there is no specific function for reading filesystems usage
+   information and you have the <sys/filsys.h> header file.  [SVR2]  */
+#undef STAT_READ_FILSYS
+
+/* Define if statfs takes 2 args and struct statfs has a field named f_bsize.
+   [4.3BSD, SunOS 4, HP-UX, AIX PS/2]  */
+#undef STAT_STATFS2_BSIZE
+
+/* Define if statfs takes 2 args and struct statfs has a field named f_fsize.
+   [4.4BSD, NetBSD]  */
+#undef STAT_STATFS2_FSIZE
+
+/* Define if statfs takes 2 args and the second argument has
+   type struct fs_data.  [Ultrix]  */
+#undef STAT_STATFS2_FS_DATA
+
+/* Define if statfs takes 4 args.  [SVR3, Dynix, Irix, Dolphin]  */
+#undef STAT_STATFS4
+
+/* Define if there is a function named statvfs.  [SVR4]  */
+#undef STAT_STATVFS
+
+/* Define if the block counts reported by statfs may be truncated to 2GB
+   and the correct values may be stored in the f_spare array.
+   [SunOS 4.1.2, 4.1.3, and 4.1.3_U1 are reported to have this problem.
+   SunOS 4.1.1 seems not to be affected.]  */
+#undef STATFS_TRUNCATES_BLOCK_COUNTS
+
+
+/* to fix a bug in autoheader on DEC OSF1. */
+#undef HAVE_PROGRAM_INVOCATION_NAME
+
+#undef HAVE_SOCKETS
+#undef HAVE_SOCKADDR_SUN_LEN
+
+#undef HAVE_LIBJPEG
+#undef HAVE_LIBGIF
+#undef HAVE_LIBTIFF
+#undef HAVE_LIBZ
+#undef HAVE_LIBPNG
+#undef GNOME_ENABLE_DEBUG
+#undef HAVE_GMP2_INCLUDE_DIR
+#undef HAVE_GUILE
+
+#undef ssize_t
+#undef u_int64_t
+#undef int64_t
+
+#undef HAVE_GLIBTOP_MACHINE_H
+
+#undef GLIBTOP_NAMES
+#undef GLIBTOP_GUILE
+#undef GLIBTOP_GUILE_NAMES
+#undef GLIBTOP_EXAMPLES
+#undef GLIBTOP_INODEDB
+
+#undef NEED_LIBGTOP
+
+#undef HAVE_LINUX_TABLE
+
+#undef HAVE_XAUTH
+

acinclude.m4

@@ -0,0 +1,400 @@
+dnl aclocal.m4 generated automatically by aclocal 1.2h
+
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+######################################################################
+# progtest.m4 from gettext 0.32
+######################################################################
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+
+######################################################################
+# lcmessage.m4 from gettext 0.32
+######################################################################
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+  [if test $ac_cv_header_locale_h = yes; then
+    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      AC_DEFINE(HAVE_LC_MESSAGES)
+    fi
+  fi])
+
+
+
+######################################################################
+# gettext.m4 from gettext 0.32
+######################################################################
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+AC_DEFUN(AM_WITH_NLS,
+  [AC_MSG_CHECKING([whether NLS is requested])
+    dnl Default is enabled NLS
+    AC_ARG_ENABLE(nls,
+      [  --disable-nls           do not use Native Language Support],
+      USE_NLS=$enableval, USE_NLS=yes)
+    AC_MSG_RESULT($USE_NLS)
+    AC_SUBST(USE_NLS)
+
+    USE_INCLUDED_LIBINTL=no
+
+    dnl If we use NLS figure out what method
+    if test "$USE_NLS" = "yes"; then
+      AC_DEFINE(ENABLE_NLS)
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH(included-gettext,
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If gettext or catgets are available (in this order) we
+        dnl use this.  Else we have to fall back to GNU NLS library.
+	dnl catgets is only used if permitted by option --with-catgets.
+	nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	AC_CHECK_HEADER(libintl.h,
+	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     AC_CHECK_LIB(intl, bindtextdomain,
+	       [AC_CACHE_CHECK([for gettext in libintl],
+		 gt_cv_func_gettext_libintl,
+		 [AC_TRY_LINK([], [return (int) gettext ("")],
+		 gt_cv_func_gettext_libintl=yes,
+		 gt_cv_func_gettext_libintl=no)])])
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      AC_DEFINE(HAVE_GETTEXT)
+	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+	      if test "$MSGFMT" != "no"; then
+		AC_CHECK_FUNCS(dcgettext)
+		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr],
+		  [CATOBJEXT=.gmo
+		   DATADIRNAME=share],
+		  [CATOBJEXT=.mo
+		   DATADIRNAME=lib])
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	])
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  AC_MSG_CHECKING([whether catgets can be used])
+	  AC_ARG_WITH(catgets,
+	    [  --with-catgets          use catgets functions if available],
+	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
+	  AC_MSG_RESULT($nls_cv_use_catgets)
+
+	  if test "$nls_cv_use_catgets" = "yes"; then
+	    dnl No gettext in C library.  Try catgets next.
+	    AC_CHECK_LIB(i, main)
+	    AC_CHECK_FUNC(catgets,
+	      [AC_DEFINE(HAVE_CATGETS)
+	       INTLOBJS="\$(CATOBJS)"
+	       AC_PATH_PROG(GENCAT, gencat, no)dnl
+	       if test "$GENCAT" != "no"; then
+		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
+		 if test "$GMSGFMT" = "no"; then
+		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
+		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
+		 fi
+		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		 USE_INCLUDED_LIBINTL=yes
+		 CATOBJEXT=.cat
+		 INSTOBJEXT=.cat
+		 DATADIRNAME=lib
+		 INTLDEPS='$(top_builddir)/intl/libintl.a'
+		 INTLLIBS=$INTLDEPS
+		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+		 nls_cv_header_intl=intl/libintl.h
+		 nls_cv_header_libgt=intl/libgettext.h
+	       fi])
+	  fi
+        fi
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  dnl Neither gettext nor catgets in included in the C library.
+	  dnl Fall back on GNU gettext library.
+	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        INTLOBJS="\$(GETTOBJS)"
+        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+        AC_SUBST(MSGFMT)
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=intl/libintl.h
+        nls_cv_header_libgt=intl/libgettext.h
+      fi
+
+      dnl Test whether we really found GNU xgettext.
+      if test "$XGETTEXT" != ":"; then
+	dnl If it is no GNU xgettext we define it as : so that the
+	dnl Makefiles still can work.
+	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found xgettext programs is not GNU xgettext; ignore it])
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=intl/libintl.h
+      nls_cv_header_libgt=intl/libgettext.h
+    fi
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl These rules are solely for the distribution goal.  While doing this
+    dnl we only have to keep exactly one list of the available catalogs
+    dnl in configure.in.
+    for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST(USE_INCLUDED_LIBINTL)
+    AC_SUBST(CATALOGS)
+    AC_SUBST(CATOBJEXT)
+    AC_SUBST(DATADIRNAME)
+    AC_SUBST(GMOFILES)
+    AC_SUBST(INSTOBJEXT)
+    AC_SUBST(INTLDEPS)
+    AC_SUBST(INTLLIBS)
+    AC_SUBST(INTLOBJS)
+    AC_SUBST(POFILES)
+    AC_SUBST(POSUB)
+  ])
+
+AC_DEFUN(AM_GNU_GETTEXT,
+  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+   AC_REQUIRE([AC_PROG_CC])dnl
+   AC_REQUIRE([AC_PROG_RANLIB])dnl
+   AC_REQUIRE([AC_ISC_POSIX])dnl
+   AC_REQUIRE([AC_HEADER_STDC])dnl
+   AC_REQUIRE([AC_C_CONST])dnl
+   AC_REQUIRE([AC_C_INLINE])dnl
+   AC_REQUIRE([AC_TYPE_OFF_T])dnl
+   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+   AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h])
+   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     AC_CHECK_FUNCS(stpcpy)
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     AC_DEFINE(HAVE_STPCPY)
+   fi
+
+   AM_LC_MESSAGES
+   AM_WITH_NLS
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       AC_MSG_CHECKING(for catalogs to be installed)
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       AC_MSG_RESULT($LINGUAS)
+     fi
+
+     dnl Construct list of names of catalog files to be constructed.
+     if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+   dnl The reference to <locale.h> in the installed <libintl.h> file
+   dnl must be resolved because we cannot expect the users of this
+   dnl to define HAVE_LOCALE_H.
+   if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   AC_SUBST(INCLUDE_LOCALE_H)
+
+   dnl Determine which catalog format we have (if any is needed)
+   dnl For now we know about two different formats:
+   dnl   Linux libc-5 and the normal X/Open format
+   test -d intl || mkdir intl
+   if test "$CATOBJEXT" = ".cat"; then
+     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+     dnl Transform the SED scripts while copying because some dumb SEDs
+     dnl cannot handle comments.
+     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+   fi
+   dnl po2tbl.sed is always needed.
+   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
+
+   dnl In the intl/Makefile.in we have a special dependency which makes
+   dnl only sense for gettext.  We comment this out for non-gettext
+   dnl packages.
+   if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   AC_SUBST(GT_NO)
+   AC_SUBST(GT_YES)
+
+   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+   dnl Try to locate is.
+   MKINSTALLDIRS=
+   if test -n "$ac_aux_dir"; then
+     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+   fi
+   if test -z "$MKINSTALLDIRS"; then
+     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+   fi
+   AC_SUBST(MKINSTALLDIRS)
+
+   dnl *** For now the libtool support in intl/Makefile is not for real.
+   l=
+   AC_SUBST(l)
+
+   dnl Generate list of files to be processed by xgettext which will
+   dnl be included in po/Makefile.
+   test -d po || mkdir po
+   if test "x$srcdir" != "x."; then
+     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+       posrcprefix="$srcdir/"
+     else
+       posrcprefix="../$srcdir/"
+     fi
+   else
+     posrcprefix="../"
+   fi
+   rm -f po/POTFILES
+   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	< $srcdir/po/POTFILES.in > po/POTFILES
+  ])

autogen.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+PKG_NAME="Gnome Top Library"
+
+(test -f $srcdir/configure.in \
+  && test -f $srcdir/copyright.txt \
+  && test -d $srcdir/sysdeps) || {
+    echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
+    echo " top-level gnome directory"
+    exit 1
+}
+
+. $srcdir/macros/autogen.sh

config.guess

@@ -0,0 +1,883 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >dummy.s
+	.globl main
+	.ent main
+main:
+	.frame \$30,0,\$26,0
+	.prologue 0
+	.long 0x47e03d80 # implver $0
+	lda \$2,259
+	.long 0x47e20c21 # amask $2,$1
+	srl \$1,8,\$2
+	sll \$2,2,\$2
+	sll \$0,3,\$0
+	addl \$1,\$0,\$0
+	addl \$2,\$0,\$0
+	ret \$31,(\$26),1
+	.end main
+EOF
+	${CC-cc} dummy.s -o dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		./dummy
+		case "$?" in
+			7)
+				UNAME_MACHINE="alpha"
+				;;
+			15)
+				UNAME_MACHINE="alphaev5"
+				;;
+			14)
+				UNAME_MACHINE="alphaev56"
+				;;
+			10)
+				UNAME_MACHINE="alphapca56"
+				;;
+			16)
+				UNAME_MACHINE="alphaev6"
+				;;
+		esac
+	fi
+	rm -f dummy.s dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
+    amiga:NetBSD:*:*)
+      echo m68k-cbm-netbsd${UNAME_RELEASE}
+      exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    arm32:NetBSD:*:*)
+	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:NetBSD:*:*)
+	echo m68k-atari-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:NetBSD:*:*)
+	echo m68k-sun-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:NetBSD:*:*)
+	echo m68k-apple-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >dummy.c
+	int main (argc, argv) int argc; char **argv; {
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy \
+	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	fi
+        else echo i586-dg-dgux${UNAME_RELEASE}
+        fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+		rm -f dummy.c dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:4)
+	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=4.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[3478]??:HP-UX:*:*)
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
+	    9000/8?? )            HP_ARCH=hppa1.0 ;;
+	esac
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
+    hp3[0-9][05]:NetBSD:*:*)
+	echo m68k-hp-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:NetBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo i386-pc-cygwin32
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo i386-pc-mingw32
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin32
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    *:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us.
+	ld_help_string=`ld --help 2>&1`
+	ld_supported_emulations=`echo $ld_help_string \
+			 | sed -ne '/supported emulations:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported emulations: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_emulations" in
+	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
+	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
+	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+	  elf32ppc)   echo "powerpc-unknown-linux-gnu"              ; exit 0 ;;
+	esac
+
+	if test "${UNAME_MACHINE}" = "alpha" ; then
+		sed 's/^	//'  <<EOF >dummy.s
+		.globl main
+		.ent main
+	main:
+		.frame \$30,0,\$26,0
+		.prologue 0
+		.long 0x47e03d80 # implver $0
+		lda \$2,259
+		.long 0x47e20c21 # amask $2,$1
+		srl \$1,8,\$2
+		sll \$2,2,\$2
+		sll \$0,3,\$0
+		addl \$1,\$0,\$0
+		addl \$2,\$0,\$0
+		ret \$31,(\$26),1
+		.end main
+EOF
+		LIBC=""
+		${CC-cc} dummy.s -o dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./dummy
+			case "$?" in
+			7)
+				UNAME_MACHINE="alpha"
+				;;
+			15)
+				UNAME_MACHINE="alphaev5"
+				;;
+			14)
+				UNAME_MACHINE="alphaev56"
+				;;
+			10)
+				UNAME_MACHINE="alphapca56"
+				;;
+			16)
+				UNAME_MACHINE="alphaev6"
+				;;
+			esac	
+
+			objdump --private-headers dummy | \
+			  grep ld.so.1 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi	
+		rm -f dummy.s dummy
+		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >dummy.c <<EOF
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
+	else
+	  # Either a pre-BFD a.out linker (linux-gnuoldld)
+	  # or one that does not give us useful --help.
+	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	  # If ld does not provide *any* "supported emulations:"
+	  # that means it is gnuoldld.
+	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+	  case "${UNAME_MACHINE}" in
+	  i?86)
+	    VENDOR=pc;
+	    ;;
+	  *)
+	    VENDOR=unknown;
+	    ;;
+	  esac
+	  # Determine whether the default compiler is a.out or elf
+	  cat >dummy.c <<EOF
+#include <features.h>
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
+	fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i?86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    pc:*:*:*)
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i?86:LynxOS:2.*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:*:6*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1

config.sub

@@ -0,0 +1,954 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+#   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+	echo Configuration name missing. 1>&2
+	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+	echo "or     $0 ALIAS" 1>&2
+	echo where ALIAS is a recognized configuration type. 1>&2
+	exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+	*local*)
+		echo $1
+		exit 0
+		;;
+	*)
+	;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  linux-gnu*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple)
+		os=
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+		| arme[lb] | pyramid | mn10200 | mn10300 \
+		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
+		| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
+		| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
+		| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
+		| mipstx39 | mipstx39el \
+		| sparc | sparclet | sparclite | sparc64 | v850)
+		basic_machine=$basic_machine-unknown
+		;;
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i[3456]86)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
+	      | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
+	      | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
+	      | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
+	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+	      | sparc64-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-*  \
+	      | mipstx39-* | mipstx39el-* \
+	      | f301-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-cbm
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-cbm
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-cbm
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[ctj]90-cray)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i[3456]86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i[3456]86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i[3456]86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i[3456]86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+        pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5)
+		basic_machine=i586-intel
+		;;
+	pentiumpro | p6)
+		basic_machine=i686-intel
+		;;
+	pentium-* | p5-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	k5)
+		# We don't have specific support for AMD's K5 yet, so just call it a Pentium
+		basic_machine=i586-amd
+		;;
+	nexen)
+		# We don't have specific support for Nexgen yet, so just call it a Pentium
+		basic_machine=i586-nexgen
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=rs6000-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+	        ;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+	        ;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	xmp)
+		basic_machine=xmp-cray
+		os=-unicos
+		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sparc)
+		basic_machine=sparc-sun
+		;;
+        cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+        pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+        *-gould)
+		os=-sysv
+		;;
+        *-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+        *-sgi)
+		os=-irix
+		;;
+        *-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f301-fujitsu)
+		os=-uxpv
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os

configure.in

@@ -1,27 +1,11 @@
 dnl
-dnl Configure script for the Gnome library
+Mnl Configure script for the Gnome library
 dnl
 
 AC_INIT(copyright.txt)
 AM_CONFIG_HEADER(config.h)
 AC_CANONICAL_SYSTEM
 
-dnl This is required at several places
-AC_CHECK_PROG(ac_dc_found, dc, yes, no)
-if test x$ac_dc_found != xyes ; then
-AC_MSG_ERROR([
-*** The "dc" utility was not found on your system.
-***
-*** When using RedHat Linux, you need to install the "bc" package.
-***
-*** It is now part of the "bc" package, so you should look at
-*** ftp://ftp.gnu.org/pub/gnu/bc/ if you want to compile it yourself.
-***
-*** Other systems and distributions may also have it in their "bc" package,
-*** so if there's no "dc" one, please look for "bc".
-***])
-fi
-
 . $srcdir/LIBGTOP-VERSION
 AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
 
@@ -32,41 +16,31 @@ AC_SUBST(LIBGTOP_INTERFACE_AGE)
 AC_SUBST(LIBGTOP_BINARY_AGE)
 AC_SUBST(LIBGTOP_SERVER_VERSION)
 AC_SUBST(LIBGTOP_VERSION)
-AC_SUBST(LIBGTOP_VERSION_CODE)
-AC_SUBST(LIBGTOP_VERSION_SUFFIX)
 
 # libtool versioning
 LT_RELEASE=$LIBGTOP_MAJOR_VERSION.$LIBGTOP_MINOR_VERSION
 LT_CURRENT=`expr $LIBGTOP_MICRO_VERSION - $LIBGTOP_INTERFACE_AGE`
 LT_REVISION=$LIBGTOP_INTERFACE_AGE
 LT_AGE=`expr $LIBGTOP_BINARY_AGE - $LIBGTOP_INTERFACE_AGE`
-LT_VERSION_INFO='-version-info ${LT_CURRENT}:${LT_REVISION}:${LT_AGE} -release ${LT_RELEASE}'
+LT_VERSION_INFO='-version-info ${LT_CURRENT}:${LT_REVISION}:${LT_AGE}'
 AC_SUBST(LT_VERSION_INFO)
 AC_SUBST(LT_RELEASE)
 AC_SUBST(LT_CURRENT)
 AC_SUBST(LT_REVISION)
 AC_SUBST(LT_AGE)
 
-AM_ACLOCAL_INCLUDE(. macros)
+AM_ACLOCAL_INCLUDE(macros)
 
 AC_ISC_POSIX
 AC_PROG_CC
 AC_STDC_HEADERS
 AC_ARG_PROGRAM
 
-dnl We need this at some places.
-libgtop_top_builddir=`pwd`
-AC_SUBST(libgtop_top_builddir)
-
 dnl We don't use `AC_PROG_AWK' since it checks for mawk first which
 dnl does not work for libgtop.
 AC_CHECK_PROGS(AWK, gawk awk, )
 test -z "$AWK" && AC_MSG_ERROR([Sorry, you need a working awk interpreter.])
 
-dnl Most people should have a working perl interpreter on their system
-AC_CHECK_PROGS(PERL, perl5 perl)
-test -z "$PERL" && AC_MSG_ERROR([You need to have a working perl interpreter.])
-
 AC_CHECK_TOOL(CC,gcc)
 AC_CHECK_TOOL(RANLIB,ranlib)
 AC_CHECK_TOOL(AS,as)
@@ -84,43 +58,29 @@ export cross_compiling
 
 AM_PROG_LIBTOOL
 
-dnl Let the user enable compiler warnings
-GNOME_COMPILE_WARNINGS
-
+dnl If you want to use libgtop without gnome, comment the following line out.
 GNOME_INIT_HOOK(gnome_found=yes)
 
 if test "x$gnome_found" != xyes; then
-  if test "x$want_gnome" != xno ; then
-    AC_MSG_ERROR([
-*** GNOME was not found on this system. ***
-
-*** If you want to use LibGTop without GNOME, you need
-*** to give configure the --without-gnome parameter.
-])
-  else
-    AC_DEFINE(WITHOUT_GNOME)
-  fi
   GNOME_SUPPORT_CHECKS
 else
-  if test "x$want_gnome" != xno ; then
-    AM_CONDITIONAL(BUILD_GNOME_SUPPORT, false)
-  else
-    GNOME_SUPPORT_CHECKS
-  fi
+  AM_CONDITIONAL(BUILD_GNOME_SUPPORT, false)
+  AM_CONDITIONAL(CROSS_COMPILING, test "x$cross_compiling" = xyes)
 fi
 
-AM_CONDITIONAL(CROSS_COMPILING, test "x$cross_compiling" = xyes)
-
 GNOME_LIBGTOP_SYSDEPS
 GNOME_LIBGTOP_TYPES
 
+GNOME_CHECK_GUILE
+
+dnl For Solaris
+AC_CHECK_LIB(socket, socket)
+
 AC_ARG_WITH(libgtop-guile,
-[  --with-libgtop-guile    Build the libgtop guile interface (default=no)],
+[  --with-libgtop-guile    Build the libgtop guile interface (default=yes)],
 [build_guile="$withval"], [build_guile=yes])
 
-if test x$build_guile != xno ; then
-  GNOME_CHECK_GUILE
-fi
+test x$build_guile = xno && ac_cv_guile_found=no
 
 AC_ARG_WITH(libgtop-inodedb,
 [  --with-libgtop-inodedb  Build the inodedb stuff (default=no)],
@@ -144,44 +104,20 @@ if test x$ac_cv_guile_found = xyes ; then
   AC_DEFINE(GLIBTOP_GUILE)
   AC_DEFINE(GLIBTOP_GUILE_NAMES)
   libgtop_guile_found=yes
-  guile_examples='third'
-  guile_static_examples='third_static'
+  guile_examples='third third_static'
   guile_subdirs='guile'
 else
   libgtop_guile_found=no
   guile_examples=
-  guile_static_examples=
   guile_subdirs=
 fi
 
-if test x$libgtop_smp = xyes ; then
-  smp_examples='smp'
-  smp_static_examples='smp_static'
-else
-  smp_examples=
-  smp_static_examples=
-fi
-
-if test "x$enable_static" != xno; then
-  static_targets="first_static second_static mountlist_static procmap_static netload_static sysdeps_static timings_static $guile_static_examples $smp_static_examples"
-else
-  static_targets=""
-fi
-
-AM_CONDITIONAL(ENABLE_STATIC, test x$enable_static = xyes)
-AM_CONDITIONAL(ENABLE_SHARED, test x$enable_static = xyes)
-
-AC_SUBST(static_targets)
-AC_SUBST(smp_examples)
 AC_SUBST(guile_examples)
 AC_SUBST(guile_subdirs)
 
 AM_PROG_LIBTOOL
 
-AM_PATH_GLIB(1.2.0,,AC_MSG_ERROR(GLIB >= 1.2.0 is required for LibGTop))
-
-dnl You need to uncomment the following line if you want to use
-dnl libGTop without Gnome.
+dnl You need to uncomment the following line if you want to use libgtop without Gnome.
 dnl GNOME_SUPPORT_CHECKS
 
 dnl Checks for typedefs, structures, and compiler characteristics.
@@ -200,60 +136,11 @@ AC_CHECK_TYPE(ssize_t, int)
 AC_CHECK_HEADERS(memory.h)
 AC_CHECK_HEADERS(string.h strings.h, break)
 AC_REPLACE_FUNCS(strerror)
-
-dnl dlopen() and dlsym()
-DL_LIB=
-AC_CHECK_FUNCS(dlopen,,[
-  AC_CHECK_LIB(dl, dlopen, DL_LIB="-ldl", [
-    AC_CHECK_LIB(dld, shl_load, DL_LIB="-ldld", [
-      AC_CHECK_FUNCS(dlopen, DL_LIB="", DL_LIB="")
-    ])
-  ])
-])
-oLIBS="$LIBS"
-LIBS="$LIBS $DL_LIB"
-AC_CHECK_FUNCS(dlerror,,)
-LIBS="$oLIBS"
-AC_SUBST(DL_LIB)
-
-dnl Solaris
-AC_CHECK_LIB(kstat, kstat_open)
-AC_CHECK_FUNCS(getloadavg swapctl)
-AC_CHECK_HEADERS(procfs.h sys/procfs.h, break)
-
-dnl Some versions of Solaris require -lelf for -lkvm
-AC_CHECK_LIB(kvm, kvm_open,[
-  LIBS="-lkvm $LIBS"
-],[AC_MSG_CHECKING(for kvm_open in -lkvm with -lelf)
-   AC_CACHE_VAL(ac_cv_lib_kvm_with_elf,
-   [ac_save_LIBS="$LIBS"
-    LIBS="-lkvm -lelf $LIBS"
-    AC_TRY_LINK([char kvm_open();], [kvm_open()],
-                ac_cv_lib_kvm_with_elf=yes, ac_cv_lib_kvm_with_elf=no)
-    LIBS="$ac_save_LIBS"
-   ])
-   if test "$ac_cv_lib_kvm_with_elf" = "yes"; then
-     AC_MSG_RESULT(yes)
-     LIBS="-lkvm -lelf $LIBS"
-   else
-     AC_MSG_RESULT(no)
-   fi
-])
+AC_CHECK_LIB(kvm, kvm_open)
 
 dnl For DEC OSF1
 AC_CHECK_LIB(mach, vm_statistics)
 
-dnl For some broken libc5 systems (Debian 1.3)                                                           
-saved_CFLAGS=$CFLAGS                                                                                     
-CFLAGS="$CFLAGS -D_GNU_SOURCE"                                                                           
-GCC_NEED_DECLARATION(program_invocation_name, [                           
-#include <errno.h>                                                                                       
-#include <stdio.h>                                                                                       
-#include <stdlib.h>                                                                                      
-#include <string.h>                                                                                      
-])                                                                                                       
-CFLAGS=$saved_CFLAGS                                                                                     
-                                                                                                         
 dnl Check for Internet sockets.
 AC_CHECK_FUNC(socket,
  [AC_CHECK_HEADER(netinet/in.h,
@@ -276,18 +163,11 @@ AC_TYPE_SIGNAL
 AC_FUNC_STRFTIME
 AC_CHECK_FUNCS(getcwd gettimeofday getwd putenv strdup strtoul uname)
 
-dnl ## all 'es_??' are only needed for format numbers different of 'es'
-ALL_LINGUAS="az ca da de es es_DO es_GT es_HN es_MX es_PA es_PE es_SV fi fr ga gl hu ja ko nl no pl pt_BR ru sk sv tr uk zh_CN.GB2312"
-AM_GNOME_GETTEXT
+ALL_LINGUAS="fr"
+AM_GNU_GETTEXT
 
 AC_PATH_XTRA
 
-dnl For Solaris
-dnl Please don't move this before AC_PATH_XTRA
-AC_CHECK_FUNC(gethostbyname,,[AC_CHECK_LIB(nsl,gethostbyname)])
-AC_CHECK_FUNC(connect,,[AC_CHECK_LIB(socket,connect)])
-AC_CHECK_FUNC(inet_aton,,[AC_CHECK_LIB(resolv,inet_aton)])
-
 dnl The construct foo=`echo $w1 $w2 $w3` fails on some systems if $w1 = -e or -n
 dnl So we use the following instead.
 dnl XE_SPACE(var, words)
@@ -299,8 +179,7 @@ $1="$T"
 
 dnl Autodetect Xauth
 dnl -lXau is only used by gnuclient, so use a special variable for Xauth X libs
-saved_CPPFLAGS="$CPPFLAGS"
-CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+test -z "$with_xauth" && test "$window_system" = "none" && with_xauth=no
 test -z "$with_xauth" && { AC_CHECK_HEADER(X11/Xauth.h,          ,with_xauth=no) }
 test -z "$with_xauth" && { AC_CHECK_LIB(Xau, XauGetAuthByAddr,[:],with_xauth=no, $X_LIBS) }
 test -z "$with_xauth" && with_xauth=yes
@@ -308,55 +187,44 @@ if test "$with_xauth" = "yes"; then
   AC_DEFINE(HAVE_XAUTH)
   XE_SPACE(libs_xauth, $X_LIBS -lXau)
 fi
-CPPFLAGS="$saved_CPPFLAGS"
 AC_SUBST(libs_xauth)
 
 dnl For diskusage stuff
 GNOME_FILEUTILS_CHECKS
 
-dnl Debugging
-AC_ARG_ENABLE(debug, [  --enable-debug          turn on debugging [default=no]],AC_DEFINE(LIBGTOP_ENABLE_DEBUG),)
-AC_ARG_ENABLE(fatal-warnings, [  --enable-fatal-warnings make all warnings fatal [debug=no]],AC_DEFINE(LIBGTOP_FATAL_WARNINGS),)
+AC_ARG_ENABLE(debug, [  --enable-debug          turn on debugging [default=no]],AC_DEFINE(GNOME_ENABLE_DEBUG),)
 
-if test "x$gnome_found" = xyes ; then
-  LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
-  SUPPORTINCS="$GNOME_INCLUDEDIR"
-else
-  LIBSUPPORT='$(top_builddir)/support/libgnomesupport.la'
-  SUPPORTINCS='-DNEED_GNOMESUPPORT_H -I$(top_builddir)/support -I$(top_srcdir)/support'
+LIBSUPPORT=
+SUPPORTINCS=
+if test "$need_gnome_support" = yes; then
+   if test "x$gnome_found" = xyes ; then
+     LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
+     SUPPORTINCS="$GNOME_INCLUDEDIR"
+   else
+     LIBSUPPORT='$(top_builddir)/support/libgnomesupport.la'
+     SUPPORTINCS='-DNEED_GNOMESUPPORT_H -I$(top_builddir)/support -I$(top_srcdir)/support'
+   fi
 fi
 
 dnl Some ugly hack; if '-lgnomesupport' is part of $GNOME_LIBS,
 dnl we include it here.
-case "$GNOME_LIBS" in
-	'*-lgnomesupport*' ) 
-	  LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
-          SUPPORTINCS="$GNOME_INCLUDEDIR" ;;
-esac
+echo "$GNOME_LIBS" | grep -q -e '-lgnomesupport'
+if test $? = 0 ; then
+  LIBSUPPORT="$GNOME_LIBDIR -lgnomesupport"
+  SUPPORTINCS="$GNOME_INCLUDEDIR"
+fi
 AC_SUBST(LIBSUPPORT)
 AC_SUBST(SUPPORTINCS)
 
 dnl These definitions are expanded in make.
-LIBGTOP_LIBS='-L$(libdir)'
-LIBGTOP_INCS='-I$(includedir) -I$(pkglibdir)/include'
-
-if test x$libgtop_use_machine_h = xyes ; then
-  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_GLIBTOP_MACHINE_H"
-fi
+LIBGTOP_LIBS='-L$(libdir) -lgtop'
+LIBGTOP_INCS='-I$(includedir)'
 
 if test x$build_inodedb = xyes ; then
   LIBGTOP_INCS="$LIBGTOP_INCS -DGLIBTOP_INODEDB"
 fi
 
-if test x$libgtop_smp = xyes ; then
-  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_LIBGTOP_SMP"
-fi
-
-if test x$libgtop_have_sysinfo = xyes ; then
-  LIBGTOP_INCS="$LIBGTOP_INCS -DHAVE_LIBGTOP_SYSINFO"
-fi
-
-LIBGTOP_INCS="$LIBGTOP_INCS $SUPPORTINCS $GLIB_CFLAGS"
+LIBGTOP_INCS="$LIBGTOP_INCS $SUPPORTINCS"
 
 LIBGTOP_GUILE_LIBS="$LIBGTOP_LIBS"
 LIBGTOP_GUILE_INCS="$LIBGTOP_INCS"
@@ -375,19 +243,18 @@ fi
 
 AC_SUBST(libgtop_guile_found)
 
-if test -z "$LIBGTOP_EXTRA_LIBS" ; then
+if test -z $LIBGTOP_EXTRA_LIBS ; then
   LIBGTOP_EXTRA_LIBS="$libs_xauth"
 else
   LIBGTOP_EXTRA_LIBS="$LIBGTOP_EXTRA_LIBS $libs_xauth"
 fi
 
-LIBGTOP_EXTRA_LIBS="$LIBGTOP_EXTRA_LIBS $GLIB_LIBS"
-
-LIBGTOP_LIBS="$LIBGTOP_LIBS -lgtop -lgtop_sysdeps -lgtop_common"
-LIBGTOP_GUILE_LIBS="$LIBGTOP_GUILE_LIBS -lgtop -lgtop_sysdeps -lgtop_common"
+LIBGTOP_LIBS="$LIBGTOP_LIBS -lgtop_common -lgtop_sysdeps"
+LIBGTOP_GUILE_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_common -lgtop_sysdeps"
 
 LIBGTOP_NAMES_LIBS="$LIBGTOP_LIBS -lgtop_names"
-LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_guile_names -lgtop_names"
+LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_guile_names"
+LIBGTOP_GUILE_NAMES_LIBS="$LIBGTOP_GUILE_LIBS -lgtop_names"
 
 LIBGTOP_LIBS="$LIBGTOP_LIBS" 
 LIBGTOP_NAMES_LIBS="$LIBGTOP_NAMES_LIBS"
@@ -411,7 +278,7 @@ else
   guile_def=""
 fi
 
-INCLUDES="-D_IN_LIBGTOP -D_GNU_SOURCE -DGLIBTOP_NAMES -I\$(top_builddir) -I\$(top_srcdir) -I\$(top_srcdir)/sysdeps/$sysdeps_dir -I\$(top_srcdir)/include -I\$(top_srcdir)/intl $SUPPORTINCS $GLIB_CFLAGS $CFLAGS $X_CFLAGS $guile_def "'-DGTOPLOCALEDIR=\"$(datadir)/locale\" -DLIBGTOP_VERSION=\"'"$LIBGTOP_VERSION"'\" -DLIBGTOP_SERVER_VERSION=\"'"$LIBGTOP_SERVER_VERSION"'\" -DLIBGTOP_VERSION_CODE='$LIBGTOP_VERSION_CODE' -DLIBGTOP_SERVER=\"'"$LIBGTOP_SERVER"'\"'
+INCLUDES="-D_IN_LIBGTOP -D_GNU_SOURCE -DGLIBTOP_NAMES -I\$(top_builddir) -I\$(top_srcdir) -I\$(top_srcdir)/sysdeps/$sysdeps_dir -I\$(top_srcdir)/include -I\$(top_srcdir)/intl $SUPPORTINCS -W -Wall -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith $CFLAGS $guile_def "'-DGTOPLOCALEDIR=\"$(datadir)/locale\" -DLIBGTOP_VERSION=\"'"$LIBGTOP_VERSION"'\" -DLIBGTOP_SERVER_VERSION=\"'"$LIBGTOP_SERVER_VERSION"'\" -DLIBGTOP_SERVER=\"'"$LIBGTOP_SERVER"'\"'
 
 AC_SUBST(INCLUDES)
 
@@ -438,145 +305,10 @@ fi
 AC_SUBST(sysdeps_suid_lib)
 AC_SUBST(server_programs)
 
-
-dnl The following one is copied from glib/configure.in
-
-AC_OUTPUT_COMMANDS([
-
-## Generate `glibconfig.h' in two cases
-## 1. `config.status' is run either explicitly, or via configure.
-##     Esp. not when it is run in `Makefile' to generate makefiles and
-##     config.h
-## 2. CONFIG_OTHER is set explicitly
-##
-## Case 1 is difficult.  We know that `automake' sets one of
-## CONFIG_FILES or CONFIG_HEADERS to empty.  This heuristic works
-## only when AM_CONFIG_HEADER is set, however.
-
-if test -n "${CONFIG_FILES}" && test -n "${CONFIG_HEADERS}"; then
-  # Both CONFIG_FILES and CONFIG_HEADERS are non-empty ==> Case 1
-  CONFIG_OTHER=${CONFIG_OTHER:-glibtop-config.h}
-fi
-case "$CONFIG_OTHER" in
-*glibtop-config.h*)
-	echo creating glibtop-config.h
-	outfile=glibtop-config.h-tmp
-	cat > $outfile <<\_______EOF
-/* glibtop-config.h
- *
- * This is a generated file.  Please modify `configure.in'
- */
-
-#ifndef GLIBTOP_CONFIG_H
-#define GLIBTOP_CONFIG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-_______EOF
-
-	did_typedefs=no
-
-	if test x$glibtop_uint64_t != xyes ; then
-	  did_typedefs=yes
-	  cat >> $outfile <<\_______EOF
-
-#ifndef u_int64_t
-typedef unsigned long long int u_int64_t;
-#endif
-_______EOF
-	fi
-
-	if test x$glibtop_int64_t != xyes ; then
-	  did_typedefs=yes
-	  cat >> $outfile <<\_______EOF
-
-#ifndef int64_t
-typedef signed long long int int64_t;
-#endif
-_______EOF
-	fi
-
-	if test x$did_typedefs = xyes ; then
-	  cat >>$outfile <<_______EOF
-
-/*
- * NOTE:  If your application checks for "u_int64_t" or "int64_t" in its own
- *        config.h, you must not include it after any of the LibGTop headers.
- */
-_______EOF
-	fi
-
-	cat >>$outfile <<_______EOF
-
-/* Define if we need the LibGTop server. */
-_______EOF
-
-	if test x$glibtop_need_libgtop = xyes ; then
-	  echo '#define NEED_LIBGTOP 1' >> $outfile
-	else
-	  echo '#undef NEED_LIBGTOP' >> $outfile
-	fi
-
-	cat >>$outfile <<_______EOF
-
-/* Define if LibGTop has support for multiple processors. */
-_______EOF
-
-	if test x$glibtop_have_smp = xyes ; then
-	  echo '#define HAVE_LIBGTOP_SMP 1' >> $outfile
-	else
-	  echo '#undef HAVE_LIBGTOP_SMP' >> $outfile
-	fi
-
-	cat >>$outfile <<_______EOF
-
-/* LibGTop major, minor and micro version. */
-#define LIBGTOP_MAJOR_VERSION $libgtop_major_version
-#define LIBGTOP_MINOR_VERSION $libgtop_minor_version
-#define LIBGTOP_MICRO_VERSION $libgtop_micro_version
-
-/* LibGTop version and numerical version code ("1.234.567" -> 1234567). */
-#define LIBGTOP_VERSION "$libgtop_version"
-#define LIBGTOP_VERSION_CODE $libgtop_version_code
-
-/* LibGTop server version, increased each time the protocol changes. */
-#define LIBGTOP_SERVER_VERSION $libgtop_server_version
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* GLIBCONFIG_H */
-_______EOF
-
-	if cmp -s $outfile glibtop-config.h; then
-	  echo glibtop-config.h is unchanged
-	  rm -f $outfile
-	else
-	  mv $outfile glibtop-config.h
-	fi ;;
-esac
-],[
-glibtop_uint64_t=$ac_cv_type_u_int64_t
-glibtop_int64_t=$ac_cv_type_int64_t
-libgtop_major_version=$LIBGTOP_MAJOR_VERSION
-libgtop_minor_version=$LIBGTOP_MINOR_VERSION
-libgtop_micro_version=$LIBGTOP_MICRO_VERSION
-libgtop_version_code=$LIBGTOP_VERSION_CODE
-libgtop_server_version=$LIBGTOP_SERVER_VERSION
-libgtop_version=$LIBGTOP_VERSION
-glibtop_need_libgtop=$libgtop_need_server
-glibtop_have_smp=$libgtop_smp
-])
-
-
 AC_OUTPUT([
 Makefile
-libgtop.spec
 po/Makefile.in
 intl/Makefile
-misc/Makefile
 include/Makefile
 include/glibtop/Makefile
 sysdeps/Makefile
@@ -591,12 +323,12 @@ sysdeps/osf1/Makefile
 sysdeps/linux/Makefile
 sysdeps/kernel/Makefile
 sysdeps/freebsd/Makefile
-sysdeps/solaris/Makefile
 src/Makefile
 src/daemon/Makefile
 src/inodedb/Makefile
 lib/Makefile
+guile/Makefile
 examples/Makefile
-doc/Makefile
+perl/Makefile.PL
 support/Makefile
-macros/Makefile])
+macros/Makefile],[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile])

copyright.txt

@@ -0,0 +1,21 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+

doc/.cvsignore

@@ -0,0 +1,10 @@
+*.shml
+*.ced
+.timestamp
+.timestamp2
+.timestamp3
+.timestamp4
+gnome-hackers
+libgtop
+libgtop-ref
+table

doc/ChangeLog

@@ -0,0 +1,18 @@
+1998-08-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* features: New directory.
+	* gnome-hackers.sgml: Updated documentation.
+
+1998-08-11  Martin Baulig  <martin@home-of-linux.org>
+
+	* gnome-hackers.sgml: Updated documentation.
+	* autoconf.sgml: New file, included from `gnome-hackers.sgml'.
+
+1998-07-21  Martin Baulig  <martin@home-of-linux.org>
+
+	* gnome-hackers.sgml: Added note that this file is
+	currently out of date and a link to the documentation
+	of the table () function.
+
+	* table.sgml: New file - basic documentation for the
+	table () system call.

doc/Makefile

@@ -0,0 +1,39 @@
+all:	.timestamp .timestamp2 .timestamp3 .timestamp4
+
+clean:
+	-rm -f .timestamp*
+	-rm -rf libgtop gnome-hackers libgtop-ref table
+
+.timestamp:	libgtop.sgml
+	-rm -rf libgtop
+	mkdir libgtop
+	-rm -f .timestamp
+	jade -D /usr/lib/sgml -d libgtop.dsl -t sgml \
+		-V %no-make-index% libgtop.sgml > /dev/null && \
+		touch .timestamp
+
+.timestamp2:	gnome-hackers.sgml autoconf.sgml ../guile/reference.sgml \
+	features/uptime.sgml features/uptime.txt features/proclist.sgml \
+	features/procmem.sgml
+	-rm -rf gnome-hackers
+	mkdir gnome-hackers
+	-rm -f .timestamp2
+	jade -D /usr/lib/sgml -d gnome-hackers.dsl -t sgml \
+		-V %no-make-index% gnome-hackers.sgml > /dev/null && \
+		touch .timestamp2
+
+.timestamp3:	libgtop-ref.sgml ../guile/reference.sgml
+	-rm -rf libgtop-ref
+	mkdir libgtop-ref
+	-rm -f .timestamp3
+	jade -D /usr/lib/sgml -d libgtop-ref.dsl -t sgml \
+		-V %no-make-index% libgtop-ref.sgml > /dev/null && \
+		touch .timestamp3
+
+.timestamp4:	table.sgml
+	-rm -rf table
+	mkdir table
+	-rm -f .timestamp4
+	jade -D /usr/lib/sgml -d table.dsl -t sgml \
+		-V %no-make-index% table.sgml > /dev/null && \
+		touch .timestamp4

doc/autoconf.sgml

@@ -0,0 +1,253 @@
+  <sect1 id="macros">
+    <title>Autoconf macros</title>
+
+    <para>
+      All you need to check for &libgtop; is in &gnome-libgtop-check.m4;,
+      just use <function>GNOME_INIT_LIBGTOP</function> with an optional
+      <parameter>fail</parameter> argument in the same way like
+      <function>GNOME_INIT</function>:
+
+      <example>
+	<title>Warn if &libgtop; cannot be found</title>
+
+	<programlisting>GNOME_INIT_LIBGTOP</programlisting>
+      </example>
+
+      <example>
+	<title>Abort if &libgtop; cannot be found</title>
+
+	<programlisting>GNOME_INIT_LIBGTOP(fail)</programlisting>
+      </example>
+
+    <para>
+      This will define a <function>HAVE_LIBGTOP</function> automake
+      conditional and everything from the configuration script of
+      &libgtop;.
+
+  <sect1 id="libgtopConf.sh">
+    <title>The configuration script of &libgtop; (&libgtopConf.sh;)</title>
+
+    <para>
+      After a successful build of &libgtop;, a &libgtopConf.sh; script
+      containing useful configuration variables is created.
+
+    <para>
+      It defines the following variables which you can use in your
+      <filename>Makefile.am</filename>:
+
+      <variablelist>
+	<varlistentry>
+	  <term><parameter>LIBGTOP_LIBDIR</parameter></term>
+	  <listitem>
+
+	    <para>
+	      The directory where the library files of &libgtop; are installed.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_INCLUDEDIR</parameter></term>
+	  <listitem>
+
+	    <para>
+	      The directory where the header files of &libgtop; are installed.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_LIBS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to link your program with &libgtop;.
+	      
+	<varlistentry>
+	  <term><parameter>LIBGTOP_INCS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to get the header files for &libgtop;.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_NAMES_LIBS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to link your program with &libgtop; and its
+	      names interface.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_NAMES_INCS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to get the header files for &libgtop; and the
+	      required <literal>-DGLIBTOP_NAMES</literal> to get its
+	      names interface.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_GUILE_LIBS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to link your program with &libgtop; and its
+	      guile interface. This will also include all the required
+	      guile libraries.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_GUILE_INCS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to get the header files for &libgtop; and guile
+	      and the required <literal>-DGLIBTOP_GUILE</literal> to get
+	      the guile interface of &libgtop;.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_GUILE_NAMES_LIBS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to link your program with &libgtop; and both its
+	      names and its guile interface. This will also include all the
+	      required guile libraries.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_GUILE_NAMES_INCS</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Use this to get the header files for &libgtop;, its guile
+	      and its names interface, the guile header files and the
+	      required <literal>-DGLIBTOP_GUILE</literal> and
+	      <literal>-DGLIBTOP_NAMES</literal>.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_BINDIR</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      The directory where the binaries of &libgtop; are installed.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_SERVER</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Full pathname of the &libgtop; server.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_MAJOR_VERSION</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Major version of &libgtop;.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_MINOR_VERSION</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Minor version of &libgtop;.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_VERSION</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Full version of &libgtop;.
+
+	<varlistentry>
+	  <term><parameter>LIBGTOP_SERVER_VERSION</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Version of the &libgtop; server. This is incremented each
+	      time the client/server protocol changes.
+
+	<varlistentry>
+	  <term><parameter>libgtop_sysdeps_dir</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      The sysdeps directory that is used on your system.
+
+	<varlistentry>
+	  <term><parameter>libgtop_need_server</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Either <literal>yes</literal> or <literal>no</literal>.
+
+	<varlistentry>
+	  <term><parameter>libgtop_use_machine_h</parameter></term>
+	  <listitem>
+
+	    <para>
+	      Either <literal>yes</literal> or <literal>no</literal>.
+	      Intended for <emphasis>internal use only</emphasis>
+	      and may be removed in future versions.
+
+	      <note>
+		<title>Note for &libgtop; hackers</title>
+
+		<para>
+		  This variable gets set in
+		  <filename>macros/gnome-libgtop-sysdeps.m4</filename>.
+
+		<para>
+		  If this is enabled, you need to put a
+		  <filename>glibtop_machine.h</filename> header file in the
+		  sysdeps directory which needs to define a structure of
+		  type <type>glibtop_machine</type>.
+
+		<para>
+		  This structure represents the
+		  <structfield>machine</structfield> field of
+		  <type>glibtop</type> defined in
+		  <filename>glibtop.h</filename>
+		  and can be used to store some
+		  machine dependent data.
+	      </note>
+
+	<varlistentry>
+	  <term><parameter>libgtop_guile_found</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Either <literal>yes</literal> or <literal>no</literal>.
+
+	<varlistentry>
+	  <term><parameter>libgtop_want_examples</parameter></term>
+	  <listitem>
+	    
+	    <para>
+	      Considered obsolete.
+
+      </variablelist>
+
+    <para>
+      All this variables are taken from the
+      &libgtopConf.sh; script which is created during
+      the installation of &libgtop;.
+
+      <example>
+	<title>
+	  Sample &libgtopConf.sh; (gnome and guile are installed in
+	  <filename>/home/baulig/INSTALL</filename> and &libgtop; in
+	  <filename>/home/norwegen/TEST</filename>)
+	</title>
+	
+	<programlisting>&example-libgtopConf-sh;</programlisting>
+      </example>
+
+  </sect1>
+  
+<!--
+  Local Variables:
+  mode: sgml
+  sgml-omittag:t
+  sgml-shorttag:t
+  sgml-minimize-attributes:nil
+  sgml-always-quote-attributes:t
+  sgml-indent-step:2
+  sgml-indent-data: t
+  sgml-parent-document: ("gnome-hackers.sgml" "book" "chapter" "")
+  End:
+ -->

doc/catalog

@@ -0,0 +1,3 @@
+PUBLIC "-//James Clark//DTD DSSSL Flow Object Tree//EN" "fot.dtd"
+PUBLIC "ISO/IEC 10179:1996//DTD DSSSL Architecture//EN" "dsssl.dtd"
+PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" "style-sheet.dtd"

doc/features/proclist.sgml

@@ -0,0 +1,153 @@
+  <para>
+    This functions takes the following additional parameters:
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>which</parameter></term>
+	<listitem>
+
+	  <para>
+	    You can use the following constants (defined in
+	    <filename>glibtop/proclist.h</filename>) to tell
+	    <function>glibtop_get_proclist ()</function> which processes
+	    to fetch:
+
+	    <variablelist>
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_ALL</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch all processes.
+
+	      </varlistentry>
+	      
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_PID</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch process with pid <parameter>arg</parameter> or
+		    nothing if no such process exists.
+
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_PGRP</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch only processes which are in process group
+		    <parameter>arg</parameter>.
+
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_SESSION</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch only processes with session id
+		    <parameter>arg</parameter>.
+
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_TTY</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch only processes with tty id
+		    <parameter>arg</parameter>.
+		    
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_UID</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch only processes with effective user id
+		    <parameter>arg</parameter>.
+		    
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_KERN_PROC_RUID</parameter></term>
+		<listitem>
+
+		  <para>
+		    Fetch only processes with real user id
+		    <parameter>arg</parameter>.
+		    
+	      </varlistentry>
+
+	    </variablelist>
+
+	  <para>
+	    You can use one or more of the following flags (with a
+	    logical or) to hide some processes:
+
+	    <variablelist>
+	      <varlistentry>
+		<term><parameter>GLIBTOP_EXCLUDE_IDLE</parameter></term>
+		<listitem>
+
+		  <para>
+		    Don't fetch idle processes.
+
+	      </varlistentry>
+	      
+	      <varlistentry>
+		<term><parameter>GLIBTOP_EXCLUDE_SYSTEM</parameter></term>
+		<listitem>
+
+		  <para>
+		    Don't fetch system processes.
+
+	      </varlistentry>
+
+	      <varlistentry>
+		<term><parameter>GLIBTOP_EXCLUDE_NOTTY</parameter></term>
+		<listitem>
+
+		  <para>
+		    Don't fetch processes that have no controlling tty.
+
+	      </varlistentry>
+
+	    </variablelist>
+	      
+      </varlistentry>
+
+      <varlistentry>
+	<term><parameter>arg</parameter></term>
+	<listitem>
+
+	  <para>
+	    Additional argument depending upon the
+	    <parameter>which</parameter> argument.
+
+      </varlistentry>
+    </variablelist>
+
+  <para>
+    This function returns a pointer (of type <type>unsigned *</type>) to
+    the list of process ids.
+
+  <para>
+    You have to manually &glibtop-free; this pointer once finished with it.
+  
+  <!--
+  Local Variables:
+  mode: sgml
+  sgml-omittag:t
+  sgml-shorttag:t
+  sgml-minimize-attributes:nil
+  sgml-always-quote-attributes:t
+  sgml-indent-step:2
+  sgml-indent-data: t
+  sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
+  End:
+  -->
+    

doc/features/procmem.sgml

@@ -0,0 +1,103 @@
+  <para>
+    The automatically generated description above is taken from the
+    manual page of the <filename>/proc</filename> filesystem under Linux
+    and is a little bit confusing, so I make this clear here.
+    
+    <note>
+      <title>Note for people porting &libgtop; to other systems</title>
+
+      <para>
+	Well, every operating system has its own idea about the memory usage
+	of a processes, and also system utilities like <filename>ps</filename>
+	show different things on different systems.
+
+      <para>
+	Nevertheless, we should try to make &libgtop; as system independent
+	as possible, so I give you some hints here how &glibtop-get-procmem;
+	should work.
+
+	<itemizedlist>
+	  <listitem>
+	    <para>
+	      When you use &mmap; with either &MAP-SHARED; or &MAP-PRIVATE;,
+	      this should only affect the &pmem-vsize; of the process and
+	      none of its &pmem-size;, &pmem-resident;, &pmem-shared; and
+	      &pmem-rss; sizes.
+
+	  <listitem>
+	    <para>
+	      As soon as you read some of the &mmap;ed pages, they will be
+	      demand-loaded and thus count towards the &pmem-size; of the
+	      process. Also - we assume there is enough free memory - they
+	      are resident in memory until they get stolen or swapped out
+	      and thus increase the &pmem-resident; and &pmem-rss; sizes of
+	      the process.
+
+	  <listitem>
+	    <para>
+	      If the process has used &MAP-SHARED; and another process
+	      attaches the same file also &MAP-SHARED; some of the pages
+	      are shared with this process and thus increase the &pmem-shared;
+	      sizes of both processes.
+
+	  <listitem>
+	    <para>
+	      If the process has used &MAP-PRIVATE; and writes to the &mmap;ed
+	      pages, the only difference to reading from them is that they
+	      get dirty and cannot be stolen any longer but will get swapped
+	      out.
+
+	  <listitem>
+	    <para>
+	      If memory gets rare, clean pages are normally stolen which
+	      decreases the &pmem-size;, &pmem-resident;, &pmem-shared; and
+	      &pmem-rss; sizes of the process.
+
+	  <listitem>
+	    <para>
+	      When dirty pages are swapped out, this will
+	      <emphasis>not</emphasis> decrease the &pmem-size; of the
+	      process but only its &pmem-resident; and &pmem-rss; sizes
+	      (dirty pages cannot be shared).
+
+	  <listitem>
+	    <para>
+	      The &pmem-vsize; of a process can <emphasis>only</emphasis>
+	      be changed by the process itself when it requests or frees
+	      memory but <emphasis>never</emphasis> due to swapping
+	      activity of the system.
+
+	  <listitem>
+	    <para>
+	      If the &pmem-shared; size changes, this
+	      <emphasis>only</emphasis> means that the number of pages that
+	      are currently shared with other processes has changed; if this
+	      happens, this will <emphasis>never</emphasis> affect any of the
+	      other sizes of the process.
+	
+	</itemizedlist>
+
+    </note>
+
+  <para>
+    The hints above describe how it works under Linux - and we should try to
+    make &glibtop-get-procmem; show the same behavior under every other
+    system.
+
+  <para>
+    If you want to make any comments, flames, suggestions about this, please
+    feel free to do so.
+    
+    <!--
+    Local Variables:
+    mode: sgml
+    sgml-omittag:t
+    sgml-shorttag:t
+    sgml-minimize-attributes:nil
+    sgml-always-quote-attributes:t
+    sgml-indent-step:2
+    sgml-indent-data: t
+    sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
+    End:
+    -->
+  

doc/features/uptime.sgml

@@ -0,0 +1,23 @@
+  <note>
+    
+    <para>
+      You can calculate this from the CPU usage (this one is taken
+      from the FreeBSD port):
+      
+      <programlisting>&include-uptime.txt;</programlisting>
+      
+  </note>
+  
+  <!--
+  Local Variables:
+  mode: sgml
+  sgml-omittag:t
+  sgml-shorttag:t
+  sgml-minimize-attributes:nil
+  sgml-always-quote-attributes:t
+  sgml-indent-step:2
+  sgml-indent-data: t
+  sgml-parent-document: ("../gnome-hackers.sgml" "book" "sect1" "")
+  End:
+  -->
+  

doc/features/uptime.txt

@@ -0,0 +1,40 @@
+#include <glibtop.h>
+#include <glibtop/error.h>
+#include <glibtop/uptime.h>
+
+#include <glibtop/cpu.h>
+
+#include <glibtop_suid.h>
+
+static const unsigned long _glibtop_sysdeps_uptime =
+(1 << GLIBTOP_UPTIME_UPTIME) + (1 << GLIBTOP_UPTIME_IDLETIME);
+
+static const unsigned long _required_cpu_flags =
+(1 << GLIBTOP_CPU_TOTAL) + (1 << GLIBTOP_CPU_IDLE) +
+(1 << GLIBTOP_CPU_FREQUENCY);
+
+void
+glibtop_get_uptime_p (glibtop *server, glibtop_uptime *buf)
+{
+	glibtop_cpu cpu;
+
+	glibtop_init_p (server, GLIBTOP_SYSDEPS_UPTIME, 0);
+	
+	memset (buf, 0, sizeof (glibtop_uptime));
+
+	/* We simply calculate it from the CPU usage. */
+
+	glibtop_get_cpu_p (server, &amp;cpu);
+
+	/* Make sure all required fields are present. */
+
+	if ((cpu.flags &amp; _required_cpu_flags) != _required_cpu_flags)
+		return;
+
+	/* Calculate values. */
+
+	buf->uptime = (double) cpu.total / (double) cpu.frequency;
+	buf->idletime = (double) cpu.idle / (double) cpu.frequency;
+
+	buf->flags = _glibtop_sysdeps_uptime;
+}

doc/gnome-hackers.dsl

@@ -0,0 +1,12 @@
+<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
+<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
+]>
+
+<style-specification id="gnomehackersdbotohtml" use="dbtohtml">
+
+(define %output-basename% "gnome-hackers")
+(define %output-directory% "gnome-hackers")
+
+</style-specification>
+
+<external-specification id="dbtohtml" document="dbtohtml.dsl">

doc/gnome-hackers.sgml

@@ -0,0 +1,187 @@
+<!-- $Id$ -->
+
+<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
+<!-- Site-specific entities, change them if you want to copy this
+     document somewhere else. -->
+<!entity home-of-linux "http://www.home-of-linux.org/">
+
+<!-- Some general entities -->
+
+<!entity libgtop "<productname>libgtop</productname>">
+
+<!-- Some abbreviations for often used filenames and functions. -->
+
+<!entity gnome-libgtop-check.m4 "<filename>macros/gnome-libgtop-check.m4</filename>">
+<!entity libgtopConf.sh "<filename>libgtopConf.sh</filename>">
+<!entity glibtop-free "<function>glibtop_free ()</function>">
+<!entity glibtop-get-procmem "<function>glibtop_get_proc_mem ()</function>">
+<!entity mmap "<function>mmap ()</function>">
+<!entity MAP-SHARED "<parameter>MAP_SHARED</parameter>">
+<!entity MAP-PRIVATE "<parameter>MAP_PRIVATE</parameter>">
+<!entity pmem-vsize "<structfield>procmem.vsize</structfield>">
+<!entity pmem-size "<structfield>procmem.size</structfield>">
+<!entity pmem-resident "<structfield>procmem.resident</structfield>">
+<!entity pmem-shared "<structfield>procmem.shared</structfield>">
+<!entity pmem-rss "<structfield>procmem.rss</structfield>">
+
+<!-- This will include a sample `libgtopConf.sh'. -->
+
+<!entity example-libgtopConf-sh SYSTEM "libgtopConf.sh">
+
+<!-- Some entities to include other files. -->
+
+<!entity include-autoconf.sgml SYSTEM "autoconf.sgml">
+<!entity include-reference.sgml SYSTEM "../guile/reference.sgml">
+
+<!-- The following entities are used in the automatically generated
+     `reference.sgml' to include custom descriptions of the features.
+  -->
+
+<!entity include-cpu.sgml "">
+<!entity include-mem.sgml "">
+<!entity include-swap.sgml "">
+<!entity include-uptime.sgml SYSTEM "features/uptime.sgml">
+<!entity include-loadavg.sgml "">
+<!entity include-shm-limits.sgml "">
+<!entity include-msg-limits.sgml "">
+<!entity include-sem-limits.sgml "">
+<!entity include-proclist.sgml SYSTEM "features/proclist.sgml">
+<!entity include-proc-state.sgml "">
+<!entity include-proc-uid.sgml "">
+<!entity include-proc-mem.sgml SYSTEM "features/procmem.sgml">
+<!entity include-proc-time.sgml "">
+<!entity include-proc-signal.sgml "">
+<!entity include-proc-kernel.sgml "">
+<!entity include-proc-segment.sgml "">
+<!entity include-proc-map.sgml "">
+<!entity include-mountlist.sgml "">
+<!entity include-fsusage.sgml "">
+
+<!entity include-uptime.txt SYSTEM "features/uptime.txt">
+]>
+<book>
+  <bookinfo>
+    <title>Using Libgtop in the Gnome Project</title>
+    <authorgroup>
+      <author>
+	<firstname>Martin</firstname>
+	<surname>Baulig</surname>
+	<affiliation>
+	  <address>
+	    <email>martin@home-of-linux.org</email>
+	  </address>
+	</affiliation>
+      </author>
+    </authorgroup>
+    <copyright>
+      <year>1998</year>
+      <holder>Martin Baulig</holder>
+    </copyright>
+    
+    <legalnotice>
+
+      <para>
+	This documentation is free software; you can redistribute
+	it and/or modify it under the terms of the GNU General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later
+	version.
+	
+      <para>
+	This library is distributed in the hope that it will be
+	useful, but WITHOUT ANY WARRANTY; without even the implied
+	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+	PURPOSE.  See the GNU General Public License for more
+	details.
+
+      <para>
+	You should have received a copy of the GNU General Public
+	License along with this program; if not, write to the Free
+	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+	MA 02111-1307 USA
+
+      <para>
+	For more details see the file COPYING in the source
+	distribution of &libgtop;.</para>
+
+    </legalnotice>
+
+    <abstract>
+      <para>
+	<literal>
+          $Id$
+        </literal>
+
+      <para>
+	This is a short introduction in how to use
+	<productname>libgtop</productname> in the GNOME project.
+	It describes the additional options <filename>configure</filename>
+	takes and the information stored in the automatically generated
+	<filename>libgtopConf.sh</filename> configuration script.
+
+	<note>
+	  <para>
+	    Documentation about the new <function>table ()</function>
+	    function can be found here:
+
+	    <itemizedlist>
+	      <listitem><para>
+		  <ulink url="&home-of-linux;kernel/table/">
+		    &home-of-linux;kernel/table/
+		  </ulink>
+	    </itemizedlist>
+	</note>
+
+    </abstract>
+
+  </bookinfo>
+
+  <toc></toc>
+
+  <chapter id="autoconf-automake">
+    <title>Configuration</title>
+
+    &include-autoconf.sgml;
+
+  </chapter>
+
+  <chapter id="functions">
+    <title>Function Reference List</title>
+    
+    &include-reference.sgml;
+
+  </chapter>
+
+  <chapter id="porting-libgtop">
+    <title>Porting &libgtop; to other systems</title>
+
+    <para>
+      Here are some comments for people porting &libgtop; to other systems.
+
+    <sect1>
+      <title>&glibtop-get-procmem; - Process Memory information</title>
+
+      <para>
+	This section is copied here from the description of
+	&glibtop-get-procmem;.
+      </para>
+	
+      &include-proc-mem.sgml;
+
+    </sect1>
+
+  </chapter>
+
+</book>
+
+<!--
+  Local Variables:
+  mode: sgml
+  sgml-omittag:t
+  sgml-shorttag:t
+  sgml-minimize-attributes:nil
+  sgml-always-quote-attributes:t
+  sgml-indent-step:2
+  sgml-indent-data: t
+  End:
+ -->

doc/libgtop-ref.dsl

@@ -0,0 +1,12 @@
+<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
+<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
+]>
+
+<style-specification id="libgtoprefdbtohtml" use="dbtohtml">
+
+(define %output-basename% "libgtop-ref")
+(define %output-directory% "libgtop-ref")
+
+</style-specification>
+
+<external-specification id="dbtohtml" document="dbtohtml.dsl">

doc/libgtop-ref.sgml

@@ -0,0 +1,108 @@
+<!-- $Id$ -->
+
+<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
+<!entity include-reference.sgml SYSTEM "../guile/reference.sgml" >
+
+<!-- The following entities are used in the automatically generated
+     `reference.sgml' to include custom descriptions of the features.
+  -->
+
+<!entity include-cpu.sgml "">
+<!entity include-mem.sgml "">
+<!entity include-swap.sgml "">
+<!entity include-uptime.sgml "">
+<!entity include-loadavg.sgml "">
+<!entity include-shm-limits.sgml "">
+<!entity include-msg-limits.sgml "">
+<!entity include-sem-limits.sgml "">
+<!entity include-proclist.sgml "">
+<!entity include-proc-state.sgml "">
+<!entity include-proc-uid.sgml "">
+<!entity include-proc-mem.sgml "">
+<!entity include-proc-time.sgml "">
+<!entity include-proc-signal.sgml "">
+<!entity include-proc-kernel.sgml "">
+<!entity include-proc-segment.sgml "">
+<!entity include-proc-map.sgml "">
+<!entity include-mountlist.sgml "">
+<!entity include-fsusage.sgml "">
+]>
+<book>
+  <bookinfo>
+    <title>LibGTop Reference Manual</title>
+    <authorgroup>
+      <author>
+	<firstname>Martin</firstname>
+	<surname>Baulig</surname>
+	<affiliation>
+	  <address>
+	    <email>martin@home-of-linux.org</email>
+	  </address>
+	</affiliation>
+      </author>
+    </authorgroup>
+    <abstract>
+      <para>
+	<literal>$Id$</literal>
+
+      <para>
+	This reference manual is automatically generated from
+	<filename>doc/make-docbook.scm</filename>. It uses the
+	guile interface of <productname>libgtop</productname> to
+	get the names of all features the library defines and a
+	description of the structures.
+    </abstract>
+
+    <copyright>
+      <year>1998</year>
+      <holder>Martin Baulig</holder>
+    </copyright>
+    <legalnotice>
+
+      <para>
+	This documentation is free software; you can redistribute
+	it and/or modify it under the terms of the GNU General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later
+	version.
+	
+      <para>
+	This library is distributed in the hope that it will be
+	useful, but WITHOUT ANY WARRANTY; without even the implied
+	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+	PURPOSE.  See the GNU General Public License for more
+	details.
+
+      <para>
+	You should have received a copy of the GNU General Public
+	License along with this program; if not, write to the Free
+	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+	MA 02111-1307 USA
+
+      <para>
+	For more details see the file COPYING in the source
+	distribution of LibGTop.</para>
+
+    </legalnotice>
+  </bookinfo>
+  
+  <toc></toc>
+  
+  <chapter id="functions">
+    <title>Function Reference List</title>
+    
+    &include-reference.sgml;
+
+</book>
+
+<!--
+  Local Variables:
+  mode: sgml
+  sgml-omittag:t
+  sgml-shorttag:t
+  sgml-minimize-attributes:nil
+  sgml-always-quote-attributes:t
+  sgml-indent-step:2
+  sgml-indent-data: t
+  End:
+ -->

doc/libgtop.dsl

@@ -0,0 +1,12 @@
+<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
+<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
+]>
+
+<style-specification id="libgtopdbtohtml" use="dbtohtml">
+
+(define %output-basename% "libgtop")
+(define %output-directory% "libgtop")
+
+</style-specification>
+
+<external-specification id="dbtohtml" document="dbtohtml.dsl">

doc/libgtopConf.sh

@@ -0,0 +1,35 @@
+#
+# Configuration of the libgtop package
+#
+
+LIBGTOP_LIBDIR="/home/baulig/TEST/lib"
+LIBGTOP_INCLUDEDIR="/home/baulig/TEST/include"
+
+LIBGTOP_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_common -lgtop_sysdeps -L/usr/X11R6/lib -lXau"
+LIBGTOP_INCS="-I/home/baulig/TEST/include"
+
+LIBGTOP_NAMES_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_common -lgtop_sysdeps -lgtop_names -L/usr/X11R6/lib -lXau"
+LIBGTOP_NAMES_INCS="-I/home/baulig/TEST/include -DGLIBTOP_NAMES"
+
+LIBGTOP_GUILE_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_guile -lgtop_common -lgtop_sysdeps -L/usr/X11R6/lib -lXau -L/home/baulig/INSTALL/lib -lguile -ldl -lreadline -ltermcap -lm"
+LIBGTOP_GUILE_INCS="-I/home/baulig/TEST/include -I/home/baulig/INSTALL/include -DGLIBTOP_GUILE"
+
+LIBGTOP_GUILE_NAMES_LIBS="-L/home/baulig/TEST/lib -lgtop -lgtop_guile -lgtop_common -lgtop_sysdeps -lgtop_names -L/usr/X11R6/lib -lXau"
+LIBGTOP_GUILE_NAMES_INCS="-I/home/baulig/TEST/include -I/home/baulig/INSTALL/include -DGLIBTOP_GUILE -DGLIBTOP_NAMES"
+
+LIBGTOP_BINDIR="/home/baulig/TEST/bin"
+LIBGTOP_SERVER="/home/baulig/TEST/bin/libgtop_server"
+
+LIBGTOP_MAJOR_VERSION="0"
+LIBGTOP_MINOR_VERSION="2a"
+LIBGTOP_VERSION="0.2a"
+
+LIBGTOP_SERVER_VERSION="1"
+
+libgtop_sysdeps_dir="linux"
+libgtop_need_server="no"
+libgtop_use_machine_h="no"
+
+libgtop_guile_found="yes"
+
+libgtop_want_examples=""

doc/table.announce.txt

@@ -0,0 +1,161 @@
+Path: news.uni-stuttgart.de!fu-berlin.de!taurus.uni-trier.DE!baulig
+From: Martin Baulig <baulig@merkur.uni-trier.de>
+Newsgroups: comp.os.linux.development.system
+Subject: RFC: New system call for /proc information ?
+Date: 07 Jun 1998 20:22:47 +0200
+Lines: 143
+Sender: baulig@Taurus.uni-trier.de
+Message-ID: <of7zpfprs08.fsf@Taurus.uni-trier.de>
+NNTP-Posting-Host: taurus.uni-trier.de (136.199.14.201)
+Mime-Version: 1.0
+Content-Type: text/plain; charset=iso-8859-1
+Content-Transfer-Encoding: 8bit
+NNTP-Posting-User: baulig
+X-Access: 16 1542 1543
+X-Trace: fu-berlin.de 897243777 29527 baulig 136.199.14.201
+X-Newsreader: Gnus v5.6.11/XEmacs 20.3 - "Vatican City"
+Xref: news.uni-stuttgart.de comp.os.linux.development.system:73539
+
+[Posted to the Gnome Mailing List and to comp.os.linux.development.system]
+
+Request for Comments:
+====================
+
+Should we have a new system call under Linux which fetches information
+from the /proc filesytem similar to the table() function of DEC OSF/1 ?
+
+The whole story:
+===============
+
+I am currently working on libgtop, a library that fetches information
+from the proc filesystem for user processes. This library uses a suid
+server on system where this is required. On Linux, the information are
+fetched directly from the proc filesystem.
+
+Now, I made some profilings (fetches 50000 times cpu, memory, swap,
+uptime and loadavg):
+
+Each sample counts as 0.01 seconds.
+  %   cumulative   self              self     total           
+ time   seconds   seconds    calls  ns/call  ns/call  name    
+ 91.86    348.03   348.03                             read
+  3.07    359.67    11.64                             open
+  0.67    362.22     2.55                             close
+  0.16    363.55     0.62                             memset
+  0.16    364.14     0.59                             __ipc
+  0.03    368.84     0.12                             vsscanf (iovsscanf.c:31)
+  0.01    374.49     0.05                             sscanf (sscanf.c:28)
+  0.00    378.71     0.01                             semctl (semctl.c:32)
+  0.00    378.73     0.01                             shmctl (shmctl.c:30)
+
+granularity: each sample hit covers 4 byte(s) for 0.00% of 378.88 seconds
+
+index % time    self  children    called     name
+[1]     91.9  348.03    0.00                 read [1]
+-----------------------------------------------
+[2]      3.1   11.64    0.00                 open [2]
+-----------------------------------------------
+[3]      0.7    2.55    0.00                 close [3]
+-----------------------------------------------
+[5]      0.2    0.62    0.00                 memset [5]
+-----------------------------------------------
+[6]      0.2    0.59    0.00                 __ipc [6]
+-----------------------------------------------
+[35]     0.0    0.12    0.00                 vsscanf (iovsscanf.c:31) [35]
+-----------------------------------------------
+[96]     0.0    0.05    0.00                 sscanf (sscanf.c:28) [96]
+-----------------------------------------------
+
+You see, it spends a lot of time in read() which is only used to read the
+data from the files in /proc. Well, basically one can say that these
+timings are not so bad, normally a process periodically fetches those
+information say 10 times a seconds which makes 36000 invocations per
+hour.
+
+This will make a total of about 250 seconds per hour or on even say:
+
+``a program fetching those information at a frequency of 10 will take
+  about 7 % of each hour just for reading files from /proc''.
+
+Now look at timings of __ipc, they're about 350 times better 'cause this
+is done using system calls.
+
+So far so good, now look at how this is done on the DEC OSF/1 port of the
+library (the following code is part of libgtop - GPL/LGPL):
+
+CPU usage:
+{
+	struct tbl_sysinfo sysinfo;
+	int ret;
+	
+	ret = table (TBL_SYSINFO, 0, (char *) &sysinfo, 1,
+		     sizeof (struct tbl_sysinfo)); 
+
+	buf->user = sysinfo.si_user;
+	buf->nice = sysinfo.si_nice;
+	buf->sys  = sysinfo.si_sys;
+	buf->idle = sysinfo.si_idle;
+}
+
+Well, the table() command of DEC OSF/1 has may disadvantages, too - such
+as requiring to be root to fetch any information about processes (well, for
+each process that is not the current one).
+
+But this works using system calls rather that reading and parsing files
+and should be about as fast as getting the IPC information on Linux.
+
+Under Linux, the current trend seems to be to move anything into the /proc
+filesystem, but if you look at the timings, wouldn't it be better to also
+implement a system call interface ?
+
+Don't understand me wrong:
+=========================
+
+I *do not want* to *replace* the /proc filesystem - it's an excellent
+idea to be able to fetch all information on the command line without
+any program just a simple 'cat' - I want to *add* a *new* system call
+to allow programmers to fetch those information faster that reading
+from /proc.
+
+To come to the point:
+=====================
+
+Is there any public interest in having a new system call under Linux
+which can be used to fetch all information that are currently in the
+/proc filesystem.
+
+Basically, this system would be defined like this:
+
+	asmlinkage int
+	sys_table (int command, struct sysinfo_table *buf)
+
+and be invoked like this:
+
+	#include <sys/table.h>
+	
+	{
+	  struct sysinfo_cpu cpu;
+	  struct sysinfo_mem mem;
+	
+	  ret = table (TABLE_CPU, &cpu);
+	  if (ret == -1) return; /* or invoke any error handler */
+	
+	  ret = table (TABLE_MEM, &mem);
+	  if (ret == -1) return;
+	}
+
+What do you think, folks. Should we have such a system call under Linux ?
+I can do the implementation of this system call, but I want to have some
+feedback first.
+
+Martin
+
+-- 
+-----------------------------------------------------------------
+   Martin Baulig - Angewandte Mathematik - Universitaet Trier
+
+   baulig@castor.uni-trier.de, http://www.home-of-linux.com/
+   Key: 1024-bit key with ID C8178435 created 1997/01/24 
+   ID:  67 C1 84 A0 47 F5 11 C5  5F 68 4C 84 99 05 C3 92
+   Finger me for public key or fetch finger.txt from the url above
+------------------------------------------------------------------

doc/table.dsl

@@ -0,0 +1,12 @@
+<!doctype style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
+<!ENTITY dbtohtml.dsl SYSTEM "dbtohtml.dsl" CDATA DSSSL >
+]>
+
+<style-specification id="tabledbotohtml" use="dbtohtml">
+
+(define %output-basename% "table")
+(define %output-directory% "table")
+
+</style-specification>
+
+<external-specification id="dbtohtml" document="dbtohtml.dsl">

doc/table.sgml

@@ -0,0 +1,193 @@
+<!-- $Id$ -->
+
+<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
+<!entity libgtopConf.sh SYSTEM "../libgtopConf.sh" >
+<!entity home-of-linux "http://www.home-of-linux.org/">
+<!entity table-announce-first "&home-of-linux;kernel/table/ANNOUNCE.FIRST">
+<!entity table20-tgz "&home-of-linux;kernel/table/table20.tgz">
+<!entity table21-tgz "&home-of-linux;kernel/table/table21.tgz">
+<!entity news-c-o-l-d-s "comp.os.linux.development.system">
+<!entity libgtop "<productname>libgtop</productname>">
+<!entity table "<function>table ()</function>">
+]>
+<book>
+  <bookinfo>
+    <title>The &table; system call under Linux</title>
+    <authorgroup>
+      <author>
+	<firstname>Martin</firstname>
+	<surname>Baulig</surname>
+	<affiliation>
+	  <address>
+	    <email>martin@home-of-linux.org</email>
+	  </address>
+	</affiliation>
+      </author>
+    </authorgroup>
+    <copyright>
+      <year>1998</year>
+      <holder>Martin Baulig</holder>
+    </copyright>
+    
+    <legalnotice>
+
+      <para>
+	This documentation is free software; you can redistribute
+	it and/or modify it under the terms of the GNU General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later
+	version.
+	
+      <para>
+	This library is distributed in the hope that it will be
+	useful, but WITHOUT ANY WARRANTY; without even the implied
+	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+	PURPOSE.  See the GNU General Public License for more
+	details.
+
+      <para>
+	You should have received a copy of the GNU General Public
+	License along with this program; if not, write to the Free
+	Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+	MA 02111-1307 USA
+
+      <para>
+	For more details see the file COPYING in the source
+	distribution of LibGTop.</para>
+
+    </legalnotice>
+
+    <abstract>
+      <para>
+	<literal>$Id$</literal>
+
+      <para>
+	Under <productname>Linux</productname>, reading from
+	<filename>/proc</filename> is somehow slow because the data
+	needs to be converted into a stringified representation from
+	the kernel and to be parsed from the application program to
+	get the original data back.
+
+	While doing the <productname>DEC OSF/1</productname> port of
+	&libgtop; I got the idea to add something similar to the &table;
+	function there to the Linux kernel.
+
+	This is what this document is about.
+    </abstract>
+
+  </bookinfo>
+
+  <toc></toc>
+
+  <chapter id="why-not-sysctl">
+    <title>Why not <function>sysctl</function>?</title>
+
+    <para>
+      Some weeks ago, I posted the initial proposal of the project to
+      <ulink url="news:&news-c-o-l-d-s;">&news-c-o-l-d-s;</ulink> with
+      Message-ID <literal>&lt;of7zpfprs08.fsf@Taurus.uni-trier.de&gt;</literal>.
+
+    <para>
+      You can also read this article at my site:
+
+      <itemizedlist>
+	<listitem><para>
+	  <ulink url="&table-announce-first;">&table-announce-first;</ulink>
+      </itemizedlist>
+
+    <para>
+      Some people told me to include all the stuff into
+      <function>sysctl</function> instead of inventing a new system call.
+
+    <para>
+      Basically this is a good idea, but the main problem with
+      <function>sysctl</function> is that this should be applied to standard
+      kernels and not just as a short patch. Well, AFAIK something similar
+      is on the "wish list" for 2.2er kernels - but of cause it'll need some
+      time until we have a real replacement of the <filename>/proc</filename>
+      filesystem in <function>sysctl</function>.
+
+    <para>
+      If someone thinks that this absolutely should be included in
+      <function>sysctl</function>: think about some kind of interface,
+      discuss it with the kernel developers, ...
+
+  <chapter id="about-table">
+    <title>About the &table; function</title>
+
+    <para>
+      Using the &table; function will not affect any existing kernel
+      structures and can be done independent from kernel development.
+
+    <para>
+      So it can easily be used in &libgtop; until we have something
+      simliar in standard kernels.
+
+    <para>
+      If you want to use the &table; function in your own programs, be
+      aware that it is just intended to be some kind of quick solution
+      for &libgtop; until there's something better in standard kernels.
+
+  <chapter id="how-to-use">
+    <title>How to use the &table; function in &libgtop;</title>
+
+    <para>
+      The source code of the &table; function is distributed together with
+      &libgtop;. It can be found in the <filename>kernel/table20</filename>
+      directory for 2.0.xx kernels and in the <filename>kernel/table21</filename>
+      directory for 2.1.xx kernels.
+
+    <para>
+      You can also download it from my site:
+      
+      <itemizedlist>
+	<listitem><para>
+	    <ulink url="&table20-tgz;">&table20-tgz</ulink>
+	    (for kernel 2.0.xx)
+	<listitem><para>
+	    <ulink url="&table21-tgz;">&table21-tgz</ulink>
+	    (for kernel 2.1.xx)
+      </itemizedlist>
+
+    <para>
+      Copy the contents of the appropriate directory to
+      <filename>/usr/src/linux/table</filename>, apply the
+      patch to the kernel and re-configure &libgtop;.
+
+    <para>
+      After that, you can unmount <filename>/proc</filename> and
+      &libgtop; will still work !
+
+      <note>
+	<para>
+	  Maybe one could consider this as a bug, but currently there
+	  isn't a configuration option to disable the &table; function
+	  once you applied the patch ...
+      </note>
+
+      <note>
+	<para>
+	  Currently I'm working on the 2.1.x version to implement some
+	  features newer kernels have - so the 2.0.x version may not
+	  have all features the 2.1.x one has.
+      </note>
+
+      <note>
+	<para>
+	  The 2.1.x version of the &table; function is implemented
+	  as a kernel module. You have to do a
+	  <command>insmod table/module.o</command> manually to use it.
+
+	<para>
+	  This has the advantage that you don't need to reboot if you
+	  want to play around with the code a little bit.
+      </note>
+      
+</book>
+
+<!--
+  Local Variables:
+  mode: sgml
+  sgml-indent-data: t
+  End:
+ -->

examples/.cvsignore

@@ -0,0 +1,13 @@
+.deps
+.libs
+Makefile
+Makefile.in
+first
+first_linux
+first_static
+second
+third
+third_linux
+third_static
+second_static
+second_linux

examples/ChangeLog

@@ -0,0 +1,30 @@
+1998-08-25  Martin Baulig  <martin@home-of-linux.org>
+
+	* first.c, second.c, procmap.c: Fixed some compiler warnings.
+
+1998-08-18  Martin Baulig  <martin@home-of-linux.org>
+
+	* procmap.c: We now display filenames when compiled
+	`--with-libgtop-inodedb'.
+
+1998-08-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* second.c: Works a little bit more like `ps' - you can
+	give an optional command line argument to get information
+	about a single process.
+
+1998-07-22  Martin Baulig  <martin@home-of-linux.org>
+
+	* mountlist.c: New file.
+
+1998-06-12  Martin Baulig  <martin@home-of-linux.org>
+
+	* test.scm: New file.
+	
+1998-06-07  Martin Baulig  <martin@home-of-linux.org>
+
+	* Makefile.am (CFLAGS): Disable optimize.
+	
+	* first.c (PROFILE_COUNT): Number of times each function
+	should be called. Defaults to 1; to profile the code, you
+	can increase this when compiling.

examples/Makefile.am

@@ -0,0 +1,76 @@
+## Process this file with automake to produce Makefile.in
+
+LINK			= $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+CFLAGS			= -Wall -W @CFLAGS@ -O0
+
+DEFS			= @DEFS@
+
+# We install it in `libexec' since this will make it more easy
+# to put the examples into an extra RPM package.
+
+libexec_PROGRAMS	= first first_static second second_static \
+			  mountlist mountlist_static \
+			  procmap procmap_static \
+			  @guile_examples@
+
+EXTRA_PROGRAMS		= third third_static
+
+first_SOURCES		= first.c
+first_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+
+first_static_SOURCES	= $(first_SOURCES)
+first_static_LDADD	= $(first_LDADD)
+first_static_LDFLAGS	= -static
+
+second_SOURCES		= second.c
+second_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+
+second_static_SOURCES	= $(second_SOURCES)
+second_static_LDADD	= $(second_LDADD)
+second_static_LDFLAGS	= -static
+
+procmap_SOURCES		= procmap.c
+procmap_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+
+procmap_static_SOURCES	= $(procmap_SOURCES)
+procmap_static_LDADD	= $(procmap_LDADD)
+procmap_static_LDFLAGS	= -static
+
+
+
+third_guile_names_LIBS	= $(top_builddir)/sysdeps/guile/names/libgtop_guile_names.la
+third_names_LIBS	= $(top_builddir)/sysdeps/names/libgtop_names.la
+
+third_SOURCES		= third.c
+third_LDADD		= $(top_builddir)/sysdeps/guile/libgtop_guile.la \
+			  $(third_guile_names_LIBS) $(third_names_LIBS) \
+			  $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @GUILE_LIBS@ @INTLLIBS@ @LIBSUPPORT@ \
+			  @LIBGTOP_EXTRA_LIBS@
+
+third_static_SOURCES	= $(third_SOURCES)
+third_static_LDADD	= $(third_LDADD)
+third_static_LDFLAGS	= -static
+
+mountlist_SOURCES	= mountlist.c
+mountlist_LDADD		= $(top_builddir)/lib/libgtop.la \
+			  $(top_builddir)/sysdeps/common/libgtop_common.la \
+			  $(top_builddir)/sysdeps/@sysdeps_dir@/libgtop_sysdeps.la \
+			  @INTLLIBS@ @LIBSUPPORT@ @LIBGTOP_EXTRA_LIBS@
+
+mountlist_static_SOURCES= $(mountlist_SOURCES)
+mountlist_static_LDADD	= $(mountlist_LDADD)
+mountlist_static_LDFLAGS= -static
+

examples/first.c

@@ -0,0 +1,506 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#include <glibtop/union.h>
+#include <glibtop/sysdeps.h>
+
+#include <sys/resource.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT	1
+#endif
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_union data;
+	glibtop_sysdeps sysdeps;
+	unsigned c, method, count, port, i, *ptr;
+	char buffer [BUFSIZ];
+	pid_t pid, ppid;
+
+	count = PROFILE_COUNT;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init_r (&glibtop_global_server, 0, GLIBTOP_INIT_NO_OPEN);
+
+	glibtop_get_parameter (GLIBTOP_PARAM_METHOD, &method, sizeof (method));
+
+	printf ("Method = %d\n", method);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_COMMAND, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	printf ("Command = '%s'\n", buffer);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_HOST, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	glibtop_get_parameter (GLIBTOP_PARAM_PORT, &port, sizeof (port));
+
+	printf ("Host = '%s' - %u\n\n", buffer, port);
+
+	glibtop_init_r (&glibtop_global_server, 0, 0);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+	  	glibtop_get_cpu (&data.cpu);
+
+	printf ("CPU          (0x%08lx): %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.cpu.flags,
+		(unsigned long) data.cpu.total,
+		(unsigned long) data.cpu.user,
+		(unsigned long) data.cpu.nice,
+		(unsigned long) data.cpu.sys,
+		(unsigned long) data.cpu.idle,
+		(unsigned long) data.cpu.frequency);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_mem (&data.mem);
+
+	printf ("Memory       (0x%08lx): "
+		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.mem.flags,
+		(unsigned long) data.mem.total,
+		(unsigned long) data.mem.used,
+		(unsigned long) data.mem.free,
+		(unsigned long) data.mem.shared,
+		(unsigned long) data.mem.buffer,
+		(unsigned long) data.mem.cached,
+		(unsigned long) data.mem.user,
+		(unsigned long) data.mem.locked);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_swap (&data.swap);
+
+	printf ("Swap         (0x%08lx): %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.swap.flags,
+		(unsigned long) data.swap.total,
+		(unsigned long) data.swap.used,
+		(unsigned long) data.swap.free,
+		(unsigned long) data.swap.pagein,
+		(unsigned long) data.swap.pageout);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_uptime (&data.uptime);
+
+	printf ("Uptime       (0x%08lx): %f, %f\n",
+		(unsigned long) data.uptime.flags,
+		data.uptime.uptime, data.uptime.idletime);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_loadavg (&data.loadavg);
+
+	printf ("Loadavg      (0x%08lx): %f, %f, %f - %lu, %lu, %lu\n",
+		(unsigned long) data.loadavg.flags,
+		(double) data.loadavg.loadavg [0],
+		(double) data.loadavg.loadavg [1],
+		(double) data.loadavg.loadavg [2],
+		(unsigned long) data.loadavg.nr_running,
+		(unsigned long) data.loadavg.nr_tasks,
+		(unsigned long) data.loadavg.last_pid);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_shm_limits (&data.shm_limits);
+	
+	printf ("Shm Limits   (0x%08lx): %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.shm_limits.flags,
+		(unsigned long) data.shm_limits.shmmax,
+		(unsigned long) data.shm_limits.shmmin,
+		(unsigned long) data.shm_limits.shmmni,
+		(unsigned long) data.shm_limits.shmseg,
+		(unsigned long) data.shm_limits.shmall);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_msg_limits (&data.msg_limits);
+
+	printf ("Msg Limits   (0x%08lx): %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.msg_limits.flags,
+		(unsigned long) data.msg_limits.msgpool,
+		(unsigned long) data.msg_limits.msgmap,
+		(unsigned long) data.msg_limits.msgmax,
+		(unsigned long) data.msg_limits.msgmnb,
+		(unsigned long) data.msg_limits.msgmni,
+		(unsigned long) data.msg_limits.msgssz,
+		(unsigned long)  data.msg_limits.msgtql);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_sem_limits (&data.sem_limits);
+	
+	printf ("Sem Limits   (0x%08lx): "
+		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) data.sem_limits.flags,
+		(unsigned long) data.sem_limits.semmap,
+		(unsigned long) data.sem_limits.semmni,
+		(unsigned long) data.sem_limits.semmns,
+		(unsigned long) data.sem_limits.semmnu,
+		(unsigned long) data.sem_limits.semmsl,
+		(unsigned long) data.sem_limits.semopm,
+		(unsigned long) data.sem_limits.semume,
+		(unsigned long) data.sem_limits.semusz,
+		(unsigned long) data.sem_limits.semvmx,
+		(unsigned long) data.sem_limits.semaem);
+
+	printf ("\n");
+
+	glibtop_get_sysdeps (&sysdeps);
+
+	printf ("Sysdeps      (0x%08lx): %lu, %lu, %lu, %lu, %lu, "
+		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) sysdeps.flags,
+		(unsigned long) sysdeps.cpu,
+		(unsigned long) sysdeps.mem,
+		(unsigned long) sysdeps.swap,
+		(unsigned long) sysdeps.uptime,
+		(unsigned long) sysdeps.loadavg,
+		(unsigned long) sysdeps.shm_limits,
+		(unsigned long) sysdeps.msg_limits,
+		(unsigned long) sysdeps.sem_limits,
+		(unsigned long) sysdeps.proclist,
+		(unsigned long) sysdeps.proc_state,
+		(unsigned long) sysdeps.proc_uid,
+		(unsigned long) sysdeps.proc_mem,
+		(unsigned long) sysdeps.proc_time,
+		(unsigned long) sysdeps.proc_signal,
+		(unsigned long) sysdeps.proc_kernel,
+		(unsigned long) sysdeps.proc_segment);
+
+	printf ("\n");
+	
+	ptr = glibtop_get_proclist (&data.proclist, 0, 0);
+
+	printf ("Proclist     (0x%08lx): %lu, %lu, %lu\n",
+		(unsigned long) data.proclist.flags,
+		(unsigned long) data.proclist.number,
+		(unsigned long) data.proclist.size,
+		(unsigned long) data.proclist.total);
+
+	if (ptr) {
+		printf ("\nProcess: ");
+		for (i = 0; i < data.proclist.number; i++)
+			printf ("%s%u", i ? ", " : "", ptr [i]);
+		printf ("\n");
+	}
+
+	glibtop_free (ptr);
+
+	pid = getpid ();
+	ppid = getppid ();
+
+	printf ("\n");
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_state (&data.proc_state, pid);
+
+	printf ("Proc_State   PID  %5d (0x%08lx): '%s', %c, %lu, %lu\n",
+		(int) pid, (unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_uid (&data.proc_uid, pid);
+
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) pid,
+		(unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_mem (&data.proc_mem, pid);
+
+	printf ("Proc_Mem     PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_mem.flags,
+		(unsigned long) data.proc_mem.size,
+		(unsigned long) data.proc_mem.vsize,
+		(unsigned long) data.proc_mem.resident,
+		(unsigned long) data.proc_mem.share,
+		(unsigned long) data.proc_mem.rss,
+		(unsigned long) data.proc_mem.rss_rlim);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_segment (&data.proc_segment, pid);
+
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_stack);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_time (&data.proc_time, pid);
+
+	printf ("Proc_Time    PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_time.flags,
+		(unsigned long) data.proc_time.start_time,
+		(unsigned long) data.proc_time.rtime,
+		(unsigned long) data.proc_time.utime,
+		(unsigned long) data.proc_time.stime,
+		(unsigned long) data.proc_time.cutime,
+		(unsigned long) data.proc_time.cstime,
+		(unsigned long) data.proc_time.timeout,
+		(unsigned long) data.proc_time.it_real_value,
+		(unsigned long) data.proc_time.frequency);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_signal (&data.proc_signal, pid);
+	
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal,
+		(unsigned long) data.proc_signal.blocked,
+		(unsigned long) data.proc_signal.sigignore,
+		(unsigned long) data.proc_signal.sigcatch);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_kernel (&data.proc_kernel, pid);
+
+	printf ("Proc_Kernel  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", (int) pid,
+		(unsigned long) data.proc_kernel.flags,
+		(unsigned long) data.proc_kernel.k_flags,
+		(unsigned long) data.proc_kernel.min_flt,
+		(unsigned long) data.proc_kernel.maj_flt,
+		(unsigned long) data.proc_kernel.cmin_flt,
+		(unsigned long) data.proc_kernel.cmaj_flt,
+		(unsigned long) data.proc_kernel.kstk_esp,
+		(unsigned long) data.proc_kernel.kstk_eip,
+		(unsigned long) data.proc_kernel.nwchan,
+		data.proc_kernel.wchan);
+
+	printf ("\n");
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_state (&data.proc_state, ppid);
+
+	printf ("Proc_State   PPID %5d (0x%08lx): '%s', %c, %lu, %lu\n",
+		(int) ppid, (unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_uid (&data.proc_uid, ppid);
+
+	printf ("Proc_Uid     PPID %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) ppid,
+		(unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_mem (&data.proc_mem, ppid);
+
+	printf ("Proc_Mem     PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) ppid,
+		(unsigned long) data.proc_mem.flags,
+		(unsigned long) data.proc_mem.size,
+		(unsigned long) data.proc_mem.vsize,
+		(unsigned long) data.proc_mem.resident,
+		(unsigned long) data.proc_mem.share,
+		(unsigned long) data.proc_mem.rss,
+		(unsigned long) data.proc_mem.rss_rlim);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_segment (&data.proc_segment, ppid);
+
+	printf ("Proc_Segment PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) ppid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_stack);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_time (&data.proc_time, ppid);
+
+	printf ("Proc_Time    PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) ppid,
+		(unsigned long) data.proc_time.flags,
+		(unsigned long) data.proc_time.start_time,
+		(unsigned long) data.proc_time.rtime,
+		(unsigned long) data.proc_time.utime,
+		(unsigned long) data.proc_time.stime,
+		(unsigned long) data.proc_time.cutime,
+		(unsigned long) data.proc_time.cstime,
+		(unsigned long) data.proc_time.timeout,
+		(unsigned long) data.proc_time.it_real_value,
+		(unsigned long) data.proc_time.frequency);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_signal (&data.proc_signal, ppid);
+
+	printf ("Proc_Signal  PPID %5d (0x%08lx): %lu %lu %lu %lu\n",
+		(int) ppid, (unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal,
+		(unsigned long) data.proc_signal.blocked,
+		(unsigned long) data.proc_signal.sigignore,
+		(unsigned long) data.proc_signal.sigcatch);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_kernel (&data.proc_kernel, ppid);
+
+	printf ("Proc_Kernel  PPID %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", (int) ppid,
+		(unsigned long) data.proc_kernel.flags,
+		(unsigned long) data.proc_kernel.k_flags,
+		(unsigned long) data.proc_kernel.min_flt,
+		(unsigned long) data.proc_kernel.maj_flt,
+		(unsigned long) data.proc_kernel.cmin_flt,
+		(unsigned long) data.proc_kernel.cmaj_flt,
+		(unsigned long) data.proc_kernel.kstk_esp,
+		(unsigned long) data.proc_kernel.kstk_eip,
+		(unsigned long) data.proc_kernel.nwchan,
+		data.proc_kernel.wchan);
+
+	printf ("\n");
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_state (&data.proc_state, 1);
+
+	printf ("Proc_State   INIT %5d (0x%08lx): '%s', %c, %lu, %lu\n", 1,
+		(unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_uid (&data.proc_uid, 1);
+
+	printf ("Proc_Uid     INIT %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", 1,
+		(unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_mem (&data.proc_mem, 1);
+
+	printf ("Proc_Mem     INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", 1,
+		(unsigned long) data.proc_mem.flags,
+		(unsigned long) data.proc_mem.size,
+		(unsigned long) data.proc_mem.vsize,
+		(unsigned long) data.proc_mem.resident,
+		(unsigned long) data.proc_mem.share,
+		(unsigned long) data.proc_mem.rss,
+		(unsigned long) data.proc_mem.rss_rlim);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_segment (&data.proc_segment, 1);
+
+	printf ("Proc_Segment INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", 1,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_stack);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_time (&data.proc_time, 1);
+
+	printf ("Proc_Time    INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", 1,
+		(unsigned long) data.proc_time.flags,
+		(unsigned long) data.proc_time.start_time,
+		(unsigned long) data.proc_time.rtime,
+		(unsigned long) data.proc_time.utime,
+		(unsigned long) data.proc_time.stime,
+		(unsigned long) data.proc_time.cutime,
+		(unsigned long) data.proc_time.cstime,
+		(unsigned long) data.proc_time.timeout,
+		(unsigned long) data.proc_time.it_real_value,
+		(unsigned long) data.proc_time.frequency);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_signal (&data.proc_signal, 1);
+
+	printf ("Proc_Signal  INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu\n", 1,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal,
+		(unsigned long) data.proc_signal.blocked,
+		(unsigned long) data.proc_signal.sigignore,
+		(unsigned long) data.proc_signal.sigcatch);
+
+	for (c = 0; c < PROFILE_COUNT; c++)
+		glibtop_get_proc_kernel (&data.proc_kernel, 1);
+
+	printf ("Proc_Kernel  INIT %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", 1,
+		(unsigned long) data.proc_kernel.flags,
+		(unsigned long) data.proc_kernel.k_flags,
+		(unsigned long) data.proc_kernel.min_flt,
+		(unsigned long) data.proc_kernel.maj_flt,
+		(unsigned long) data.proc_kernel.cmin_flt,
+		(unsigned long) data.proc_kernel.cmaj_flt,
+		(unsigned long) data.proc_kernel.kstk_esp,
+		(unsigned long) data.proc_kernel.kstk_eip,
+		(unsigned long) data.proc_kernel.nwchan,
+		data.proc_kernel.wchan);
+
+	glibtop_close ();
+
+	exit (0);
+}

examples/mountlist.c

@@ -0,0 +1,111 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#include <glibtop/mountlist.h>
+#include <glibtop/fsusage.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT	1000
+#endif
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_fsusage fsusage;
+	glibtop_mountlist mount_list;
+	glibtop_mountentry *mount_entries;
+	unsigned c, index, method, count, port;
+	char buffer [BUFSIZ];
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init_r (&glibtop_global_server, 0, GLIBTOP_INIT_NO_OPEN);
+
+	glibtop_get_parameter (GLIBTOP_PARAM_METHOD, &method, sizeof (method));
+	
+	printf ("Method = %d\n", method);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_COMMAND, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	printf ("Command = '%s'\n", buffer);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_HOST, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	glibtop_get_parameter (GLIBTOP_PARAM_PORT, &port, sizeof (port));
+
+	printf ("Host = '%s' - %u\n\n", buffer, port);
+
+	printf ("sbrk (0) = %p\n\n", sbrk (0));
+
+	for (c = 0; c < PROFILE_COUNT; c++) {
+		mount_entries = glibtop_get_mountlist (&mount_list, 1);
+
+		glibtop_free (mount_entries);
+	}
+
+	printf ("sbrk (0) = %p\n\n", sbrk (0));
+
+	mount_entries = glibtop_get_mountlist (&mount_list, 1);
+
+	if (mount_entries == NULL)
+		_exit (1);
+
+	for (index = 0; index < mount_list.number; index++)
+		printf ("Mount_Entry: %-30s %-10s %-20s\n",
+			mount_entries [index].mountdir,
+			mount_entries [index].type,
+			mount_entries [index].devname);
+
+	printf ("\n\n%-23s %9s %9s %9s %9s %9s\n\n",
+		"", "Blocks", "Free", "Avail", "Files", "Free");
+
+	for (index = 0; index < mount_list.number; index++) {
+		glibtop_get_fsusage (&fsusage,
+				     mount_entries [index].mountdir);
+
+		printf ("Usage: %-16s %9Lu %9Lu %9Lu %9Lu %9Lu\n",
+			mount_entries [index].mountdir,
+			fsusage.blocks, fsusage.bfree,
+			fsusage.bavail, fsusage.files,
+			fsusage.ffree);
+	}
+
+	glibtop_free (mount_entries);
+
+	printf ("\nsbrk (0) = %p\n\n", sbrk (0));
+
+	glibtop_close ();
+
+	exit (0);
+}

examples/procmap.c

@@ -0,0 +1,145 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/parameter.h>
+
+#include <glibtop/procmap.h>
+
+#ifdef GLIBTOP_INODEDB
+#include <glibtop/inodedb.h>
+#endif
+
+#include <sys/resource.h>
+#include <sys/mman.h>
+
+#ifndef PROFILE_COUNT
+#define PROFILE_COUNT	1
+#endif
+
+int
+main (int argc, char *argv [])
+{
+#ifdef GLIBTOP_INODEDB
+	glibtop_inodedb *inodedb;
+#endif
+	glibtop_proc_map procmap;
+	glibtop_map_entry *maps;
+	unsigned method, count, port, i;
+	char buffer [BUFSIZ];
+	pid_t pid;
+
+	count = PROFILE_COUNT;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init_r (&glibtop_global_server, 0, GLIBTOP_INIT_NO_OPEN);
+
+	glibtop_get_parameter (GLIBTOP_PARAM_METHOD, &method, sizeof (method));
+
+	printf ("Method = %d\n", method);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_COMMAND, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	printf ("Command = '%s'\n", buffer);
+
+	count = glibtop_get_parameter (GLIBTOP_PARAM_HOST, buffer, BUFSIZ);
+	buffer [count] = 0;
+
+	glibtop_get_parameter (GLIBTOP_PARAM_PORT, &port, sizeof (port));
+
+	printf ("Host = '%s' - %u\n\n", buffer, port);
+
+	glibtop_init_r (&glibtop_global_server, 0, 0);
+
+	if ((argc != 2) || (sscanf (argv [1], "%d", (int *) &pid) != 1))
+		glibtop_error ("Usage: %s pid", argv [0]);
+
+#ifdef GLIBTOP_INODEDB
+	inodedb = glibtop_inodedb_open (0, 0);
+#endif
+
+	fprintf (stderr, "Getting memory maps for pid %d.\n\n", (int) pid);
+
+	maps = glibtop_get_proc_map (&procmap, pid);
+
+	for (i = 0; i < procmap.number; i++) {
+		const char *filename = NULL;
+		unsigned device, device_major, device_minor;
+		char perm [5];
+		
+		if (maps [i].flags & (1 << GLIBTOP_MAP_ENTRY_FILENAME))
+			filename = maps [i].filename;
+
+#ifdef GLIBTOP_INODEDB
+		if (inodedb && !filename)
+			filename = glibtop_inodedb_lookup
+				(inodedb, maps [i].device, maps [i].inode);
+#endif
+
+		perm [0] = (maps [i].perm & GLIBTOP_MAP_PERM_READ) ? 'r' : '-';
+		perm [1] = (maps [i].perm & GLIBTOP_MAP_PERM_WRITE) ? 'w' : '-';
+		perm [2] = (maps [i].perm & GLIBTOP_MAP_PERM_EXECUTE) ? 'x' : '-';
+		perm [3] = (maps [i].perm & GLIBTOP_MAP_PERM_SHARED) ? 's' : '-';
+		perm [4] = (maps [i].perm & GLIBTOP_MAP_PERM_PRIVATE) ? 'p' : '-';
+
+		device = (unsigned long) maps [i].device;
+		device_minor = (device & 255);
+		device_major = ((device >> 8) & 255);
+
+		if (filename)
+			fprintf (stderr, "%08lx-%08lx %08lx - "
+				 "%02x:%02x %08lu - %4s - %s\n",
+				 (unsigned long) maps [i].start,
+				 (unsigned long) maps [i].end,
+				 (unsigned long) maps [i].offset,
+				 device_major, device_minor,
+				 (unsigned long) maps [i].inode,
+				 perm, filename);
+		else
+			fprintf (stderr, "%08lx-%08lx %08lx - "
+				 "%02x:%02x %08lu - %4s\n",
+				 (unsigned long) maps [i].start,
+				 (unsigned long) maps [i].end,
+				 (unsigned long) maps [i].offset,
+				 device_major, device_minor,
+				 (unsigned long) maps [i].inode,
+				 perm);
+
+		if (filename && (filename != maps [i].filename))
+			glibtop_free (filename);
+	}
+
+	glibtop_free (maps);
+
+	glibtop_close ();
+
+	exit (0);
+}

examples/second.c

@@ -0,0 +1,192 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <locale.h>
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/union.h>
+#include <glibtop/sysdeps.h>
+
+static void
+output (pid_t pid)
+{
+	glibtop_union data;
+
+	printf ("\n");
+		
+	glibtop_get_proc_state (&data.proc_state, pid);
+		
+	printf ("Proc_State   PID  %5d (0x%08lx): "
+		"'%s', %c, %lu, %lu\n", (int) pid,
+		(unsigned long) data.proc_state.flags,
+		data.proc_state.cmd, data.proc_state.state,
+		(unsigned long) data.proc_state.uid,
+		(unsigned long) data.proc_state.gid);
+		
+	glibtop_get_proc_uid (&data.proc_uid, pid);
+		
+	printf ("Proc_Uid     PID  %5d (0x%08lx): "
+		"%d %d %d %d %d %d %d %d %d %d %d %d\n", (int) pid,
+		(unsigned long) data.proc_uid.flags,
+		data.proc_uid.uid, data.proc_uid.euid,
+		data.proc_uid.gid, data.proc_uid.egid,
+		data.proc_uid.pid, data.proc_uid.ppid,
+		data.proc_uid.pgrp, data.proc_uid.session,
+		data.proc_uid.tty, data.proc_uid.tpgid,
+		data.proc_uid.priority, data.proc_uid.nice);
+		
+	glibtop_get_proc_mem (&data.proc_mem, pid);
+		
+	printf ("Proc_Mem     PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_mem.flags,
+		(unsigned long) data.proc_mem.size,
+		(unsigned long) data.proc_mem.vsize,
+		(unsigned long) data.proc_mem.resident,
+		(unsigned long) data.proc_mem.share,
+		(unsigned long) data.proc_mem.rss,
+		(unsigned long) data.proc_mem.rss_rlim);
+		
+	glibtop_get_proc_segment (&data.proc_segment, pid);
+
+	printf ("Proc_Segment PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_segment.flags,
+		(unsigned long) data.proc_segment.text_rss,
+		(unsigned long) data.proc_segment.shlib_rss,
+		(unsigned long) data.proc_segment.data_rss,
+		(unsigned long) data.proc_segment.stack_rss,
+		(unsigned long) data.proc_segment.dirty_size,
+		(unsigned long) data.proc_segment.start_code,
+		(unsigned long) data.proc_segment.end_code,
+		(unsigned long) data.proc_segment.start_stack);
+
+	glibtop_get_proc_time (&data.proc_time, pid);
+		
+	printf ("Proc_Time    PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_time.flags,
+		(unsigned long) data.proc_time.start_time,
+		(unsigned long) data.proc_time.rtime,
+		(unsigned long) data.proc_time.utime,
+		(unsigned long) data.proc_time.stime,
+		(unsigned long) data.proc_time.cutime,
+		(unsigned long) data.proc_time.cstime,
+		(unsigned long) data.proc_time.timeout,
+		(unsigned long) data.proc_time.it_real_value,
+		(unsigned long) data.proc_time.frequency);
+
+	glibtop_get_proc_signal (&data.proc_signal, pid);
+	
+	printf ("Proc_Signal  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu\n", (int) pid,
+		(unsigned long) data.proc_signal.flags,
+		(unsigned long) data.proc_signal.signal,
+		(unsigned long) data.proc_signal.blocked,
+		(unsigned long) data.proc_signal.sigignore,
+		(unsigned long) data.proc_signal.sigcatch);
+
+	glibtop_get_proc_kernel (&data.proc_kernel, pid);
+
+	printf ("Proc_Kernel  PID  %5d (0x%08lx): "
+		"%lu %lu %lu %lu %lu %lu %lu %lu (%s)\n", (int) pid,
+		(unsigned long) data.proc_kernel.flags,
+		(unsigned long) data.proc_kernel.k_flags,
+		(unsigned long) data.proc_kernel.min_flt,
+		(unsigned long) data.proc_kernel.maj_flt,
+		(unsigned long) data.proc_kernel.cmin_flt,
+		(unsigned long) data.proc_kernel.cmaj_flt,
+		(unsigned long) data.proc_kernel.kstk_esp,
+		(unsigned long) data.proc_kernel.kstk_eip,
+		(unsigned long) data.proc_kernel.nwchan,
+		data.proc_kernel.wchan);
+
+	printf ("\n");
+}
+
+int
+main (int argc, char *argv [])
+{
+	glibtop_proclist proclist;
+	glibtop_sysdeps sysdeps;
+	unsigned *ptr, pid, i;
+
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+	
+	glibtop_init ();
+
+	glibtop_get_sysdeps (&sysdeps);
+
+	printf ("Sysdeps      (0x%08lx): %lu, %lu, %lu, %lu, %lu, "
+		"%lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu, %lu\n",
+		(unsigned long) sysdeps.flags,
+		(unsigned long) sysdeps.cpu,
+		(unsigned long) sysdeps.mem,
+		(unsigned long) sysdeps.swap,
+		(unsigned long) sysdeps.uptime,
+		(unsigned long) sysdeps.loadavg,
+		(unsigned long) sysdeps.shm_limits,
+		(unsigned long) sysdeps.msg_limits,
+		(unsigned long) sysdeps.sem_limits,
+		(unsigned long) sysdeps.proclist,
+		(unsigned long) sysdeps.proc_state,
+		(unsigned long) sysdeps.proc_uid,
+		(unsigned long) sysdeps.proc_mem,
+		(unsigned long) sysdeps.proc_time,
+		(unsigned long) sysdeps.proc_signal,
+		(unsigned long) sysdeps.proc_kernel,
+		(unsigned long) sysdeps.proc_segment);
+
+	if ((argc == 2) && (sscanf (argv [1], "%d", &pid) == 1)) {
+		output (pid);
+
+		exit (0);
+	}
+
+	printf ("\n");
+
+	ptr = glibtop_get_proclist (&proclist, 0, 0);
+
+	printf ("Proclist     (0x%08lx): %lu, %lu, %lu\n",
+		(unsigned long) proclist.flags,
+		(unsigned long) proclist.number,
+		(unsigned long) proclist.size,
+		(unsigned long) proclist.total);
+
+	if (!ptr) exit (1);
+
+	for (i = 0; i < proclist.number; i++) {
+
+		pid = ptr [i];
+		
+		output (pid);
+	}
+
+	glibtop_free (ptr);
+
+	exit (0);
+}

examples/test.scm

@@ -0,0 +1,80 @@
+(display (glibtop-names-sysdeps)) (newline)
+(display (glibtop-labels-sysdeps)) (newline)
+(display (glibtop-descriptions-sysdeps)) (newline)
+(display (glibtop-types-sysdeps)) (newline)
+
+(newline)
+
+(display (glibtop-names-cpu)) (newline)
+(display (glibtop-names-mem)) (newline)
+(display (glibtop-names-swap)) (newline)
+(display (glibtop-names-uptime)) (newline)
+(display (glibtop-names-loadavg)) (newline)
+(display (glibtop-names-shm_limits)) (newline)
+(display (glibtop-names-msg_limits)) (newline)
+(display (glibtop-names-sem_limits)) (newline)
+(display (glibtop-names-proclist)) (newline)
+(display (glibtop-names-proc_state)) (newline)
+(display (glibtop-names-proc_uid)) (newline)
+(display (glibtop-names-proc_mem)) (newline)
+(display (glibtop-names-proc_time)) (newline)
+(display (glibtop-names-proc_signal)) (newline)
+(display (glibtop-names-proc_kernel)) (newline)
+(display (glibtop-names-proc_segment)) (newline)
+
+(newline)
+
+(display (glibtop-labels-cpu)) (newline)
+(display (glibtop-labels-mem)) (newline)
+(display (glibtop-labels-swap)) (newline)
+(display (glibtop-labels-uptime)) (newline)
+(display (glibtop-labels-loadavg)) (newline)
+(display (glibtop-labels-shm_limits)) (newline)
+(display (glibtop-labels-msg_limits)) (newline)
+(display (glibtop-labels-sem_limits)) (newline)
+(display (glibtop-labels-proclist)) (newline)
+(display (glibtop-labels-proc_state)) (newline)
+(display (glibtop-labels-proc_uid)) (newline)
+(display (glibtop-labels-proc_mem)) (newline)
+(display (glibtop-labels-proc_time)) (newline)
+(display (glibtop-labels-proc_signal)) (newline)
+(display (glibtop-labels-proc_kernel)) (newline)
+(display (glibtop-labels-proc_segment)) (newline)
+
+(newline)
+
+(display (glibtop-descriptions-cpu)) (newline)
+(display (glibtop-descriptions-mem)) (newline)
+(display (glibtop-descriptions-swap)) (newline)
+(display (glibtop-descriptions-uptime)) (newline)
+(display (glibtop-descriptions-loadavg)) (newline)
+(display (glibtop-descriptions-shm_limits)) (newline)
+(display (glibtop-descriptions-msg_limits)) (newline)
+(display (glibtop-descriptions-sem_limits)) (newline)
+(display (glibtop-descriptions-proclist)) (newline)
+(display (glibtop-descriptions-proc_state)) (newline)
+(display (glibtop-descriptions-proc_uid)) (newline)
+(display (glibtop-descriptions-proc_mem)) (newline)
+(display (glibtop-descriptions-proc_time)) (newline)
+(display (glibtop-descriptions-proc_signal)) (newline)
+(display (glibtop-descriptions-proc_kernel)) (newline)
+(display (glibtop-descriptions-proc_segment)) (newline)
+
+(newline)
+
+(display (glibtop-types-cpu)) (newline)
+(display (glibtop-types-mem)) (newline)
+(display (glibtop-types-swap)) (newline)
+(display (glibtop-types-uptime)) (newline)
+(display (glibtop-types-loadavg)) (newline)
+(display (glibtop-types-shm_limits)) (newline)
+(display (glibtop-types-msg_limits)) (newline)
+(display (glibtop-types-sem_limits)) (newline)
+(display (glibtop-types-proclist)) (newline)
+(display (glibtop-types-proc_state)) (newline)
+(display (glibtop-types-proc_uid)) (newline)
+(display (glibtop-types-proc_mem)) (newline)
+(display (glibtop-types-proc_time)) (newline)
+(display (glibtop-types-proc_signal)) (newline)
+(display (glibtop-types-proc_kernel)) (newline)
+(display (glibtop-types-proc_segment)) (newline)

examples/third.c

@@ -0,0 +1,55 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <locale.h>
+
+#include <glibtop.h>
+     
+#include <glibtop/open.h>
+#include <glibtop/close.h>
+#include <glibtop/xmalloc.h>
+
+#include <glibtop/union.h>
+#include <glibtop/sysdeps.h>
+
+void main_prog(int argc, char *argv[]);
+
+int     
+main (int argc, char *argv[])
+{
+	setlocale (LC_ALL, "");
+	bindtextdomain (PACKAGE, GTOPLOCALEDIR);
+	textdomain (PACKAGE);
+
+	gh_enter (argc, argv, main_prog);
+	exit (0);
+}
+
+void
+main_prog (int argc, char *argv[])
+{
+	glibtop_boot_guile ();
+#ifdef GLIBTOP_GUILE_NAMES
+	glibtop_boot_guile_names ();
+#endif
+
+	gh_repl (argc, argv);
+}

features.def

@@ -0,0 +1,19 @@
+void|cpu|ulong(total,user,nice,sys,idle,frequency)
+void|mem|ulong(total,used,free,shared,buffer,cached,user,locked)
+void|swap|ulong(total,used,free,pagein,pageout)
+void|uptime|double(uptime,idletime)
+void|loadavg|double(loadavg[0],loadavg[1],loadavg[2]):ulong(nr_running,nr_tasks,last_pid)
+void|shm_limits|ulong(shmmax,shmmin,shmmni,shmseg,shmall)
+void|msg_limits|ulong(msgpool,msgmap,msgmax,msgmnb,msgmni,msgssz,msgtql)
+void|sem_limits|ulong(semmap,semmni,semmns,semmnu,semmsl,semopm,semume,semusz,semvmx,semaem)
+unsigned *|proclist|ulong(number,size,total)|long(which,arg)
+void|proc_state|str(cmd):char(state):ulong(uid,gid)|pid_t(pid)
+void|proc_uid|long(uid,euid,gid,egid,pid,ppid,pgrp,session,tty,tpgid,priority,nice)|pid_t(pid)
+void|proc_mem|long(size,vsize,resident,share,rss,rss_rlim)|pid_t(pid)
+void|proc_time|long(start_time,rtime,utime,stime,cutime,cstime,timeout,it_real_value,frequency)|pid_t(pid)
+void|proc_signal|ulong(signal,blocked,sigignore,sigcatch)|pid_t(pid)
+void|proc_kernel|ulong(k_flags,min_flt,maj_flt,cmin_flt,cmaj_flt,kstk_esp,kstk_eip,nwchan):str(wchan)|pid_t(pid)
+void|proc_segment|ulong(text_rss,shlib_rss,data_rss,stack_rss,dirty_size,start_code,end_code,start_stack)|pid_t(pid)
+glibtop_map_entry *|proc_map|ulong(number,size,total)|pid_t(pid)
+glibtop_mountentry *|@mountlist|ulong(number,size,total)|int(all_fs)
+void|@fsusage|ulong(blocks,bfree,bavail,files,ffree)|string|mount_dir

glibtop.h

@@ -0,0 +1,97 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_H__
+#define __GLIBTOP_H__
+
+#include <glibtop/global.h>
+
+#include <glibtop_server.h>
+#include <glibtop/types.h>
+
+#ifdef HAVE_GLIBTOP_MACHINE_H
+#include <glibtop_machine.h>
+#endif
+
+#ifndef GLIBTOP_MOUNTENTRY_LEN
+#define GLIBTOP_MOUNTENTRY_LEN	79
+#endif
+
+typedef struct _glibtop		glibtop;
+
+#include <glibtop/sysdeps.h>
+
+struct _glibtop
+{
+	unsigned flags;
+	unsigned method;		/* Server Method */
+	unsigned error_method;		/* Error Method */
+#ifdef HAVE_GLIBTOP_MACHINE_H
+	glibtop_machine machine;	/* Machine dependent data */
+#endif
+	int input [2];			/* Pipe client <- server */
+	int output [2];			/* Pipe client -> server */
+	int socket;			/* Accepted connection of a socket */
+	unsigned long os_version_code;	/* Version code of the operating system */
+	const char *name;		/* Program name for error messages */
+	const char *server_command;	/* Command used to invoke server */
+	const char *server_host;	/* Host the server should run on */
+	const char *server_user;	/* Name of the user on the target host */
+	const char *server_rsh;		/* Command used to connect to the target host */
+	unsigned long features;		/* Server is required for this features */
+	unsigned long server_port;	/* Port on which daemon is listening */
+	glibtop_sysdeps sysdeps;	/* Detailed feature list */
+	glibtop_sysdeps required;	/* Required feature list */
+	pid_t pid;			/* PID of the server */
+};
+
+extern glibtop *glibtop_global_server;
+
+extern const unsigned long glibtop_server_features;
+
+#define glibtop_init()	glibtop_init_r(&glibtop_global_server, 0, 0);
+
+#define glibtop_close()	glibtop_close_r(glibtop_global_server);
+
+extern glibtop *glibtop_init_r __P((glibtop **, unsigned long, unsigned));
+extern glibtop *glibtop_init_s __P((glibtop **, unsigned long, unsigned));
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern void glibtop_boot_guile __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern void glibtop_boot_guile_names __P((void));
+
+#ifndef GLIBTOP_NAMES
+#define GLIBTOP_NAMES
+#endif
+
+#endif
+
+#endif

guile/.cvsignore

@@ -0,0 +1,3 @@
+Makefile.in
+Makefile
+features.scm

guile/ChangeLog

@@ -0,0 +1,9 @@
+1998-07-29  Martin Baulig  <martin@home-of-linux.org>
+
+	* dynamic.c, dynamic_names.c: New files.
+
+	* Makefile.am: New file. Creates `libgtop.so' and
+	`libnames.so' which will be installed in
+	`$(datadir)/guile/libgtop'; just do a
+	`(use-modules (libgtop libgtop) (libgtop names))' in
+	guile to use them.

guile/Makefile.am

@@ -0,0 +1,60 @@
+LINK				= $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+CFLAGS				= -Wall -W @CFLAGS@
+
+sitedir = $(datadir)/guile/site
+libgtopmoduledir = $(datadir)/guile/libgtop
+
+libgtopmodule_LTLIBRARIES	= libgtop.la libnames.la
+
+libgtop_la_SOURCES		= dynamic.c
+
+libnames_la_SOURCES		= dynamic_names.c
+
+libgtop_la_LIBADD		= ../sysdeps/guile/guile.lo \
+				  ../lib/init.lo \
+				  ../lib/open.lo \
+				  ../lib/close.lo \
+				  ../lib/command.lo \
+				  ../lib/read.lo \
+				  ../lib/read_data.lo \
+				  ../lib/write.lo \
+				  ../lib/lib.lo \
+				  ../lib/parameter.lo \
+				  ../lib/sysdeps.lo \
+				  ../sysdeps/common/error.lo \
+				  ../sysdeps/common/fsusage.lo \
+				  ../sysdeps/common/gnuslib.lo \
+				  ../sysdeps/common/mountlist.lo \
+				  ../sysdeps/common/xmalloc.lo \
+				  ../sysdeps/@sysdeps_dir@/close.lo \
+				  ../sysdeps/@sysdeps_dir@/proclist.lo \
+				  ../sysdeps/@sysdeps_dir@/sem_limits.lo \
+				  ../sysdeps/@sysdeps_dir@/cpu.lo \
+				  ../sysdeps/@sysdeps_dir@/procmem.lo \
+				  ../sysdeps/@sysdeps_dir@/shm_limits.lo \
+				  ../sysdeps/@sysdeps_dir@/loadavg.lo \
+				  ../sysdeps/@sysdeps_dir@/procsegment.lo \
+				  ../sysdeps/@sysdeps_dir@/siglist.lo \
+				  ../sysdeps/@sysdeps_dir@/mem.lo \
+				  ../sysdeps/@sysdeps_dir@/procsignal.lo \
+				  ../sysdeps/@sysdeps_dir@/swap.lo \
+				  ../sysdeps/@sysdeps_dir@/msg_limits.lo \
+				  ../sysdeps/@sysdeps_dir@/procstate.lo \
+				  ../sysdeps/@sysdeps_dir@/uptime.lo \
+				  ../sysdeps/@sysdeps_dir@/open.lo \
+				  ../sysdeps/@sysdeps_dir@/proctime.lo \
+				  ../sysdeps/@sysdeps_dir@/prockernel.lo \
+				  ../sysdeps/@sysdeps_dir@/procuid.lo \
+				  ../sysdeps/@sysdeps_dir@/procmap.lo
+
+libnames_la_LIBADD		= ../sysdeps/guile/names/guile-names.lo
+
+EXTRA_DIST			= features.awk
+
+CLEANFILES			= features.scm
+
+features.scm: features.awk $(top_builddir)/config.h $(top_srcdir)/features.def
+	$(AWK) -f $(srcdir)/features.awk < $(top_srcdir)/features.def > tmp-t
+	mv tmp-t features.scm
+

guile/dynamic.c

@@ -0,0 +1,29 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <glibtop.h>
+#include <libguile/dynl.h>
+
+void
+scm_init_libgtop_libgtop_module (void)
+{
+	scm_register_module_xxx ("libgtop libgtop", glibtop_boot_guile);
+}

guile/dynamic_names.c

@@ -0,0 +1,29 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <glibtop.h>
+#include <libguile/dynl.h>
+
+void
+scm_init_libgtop_names_module (void)
+{
+	scm_register_module_xxx ("libgtop names", glibtop_boot_guile_names);
+}

guile/features.awk

@@ -0,0 +1,61 @@
+BEGIN {
+	string = "";
+	names = "";
+}
+
+function output(line) {
+	split (line, line_fields, /\|/);
+	retval = line_fields[1];
+	feature = line_fields[2];
+	param_def = line_fields[4];
+	
+	orig = feature; sub(/^@/,"",feature);
+	space = feature; gsub(/./," ",space);
+
+	if (string == "")
+		string = " '(";
+	else
+		string = string"   ";
+	string = string"(\""feature"\" (\""retval"\"";
+
+	feature_nounder = feature;
+	sub(/_/, "-", feature_nounder);
+
+	if (names == "")
+		names = " '(";
+	else
+		names = names"   ";
+	names = names"(\""feature"\" \""feature_nounder"\")\n";
+	
+	nr_params = split (param_def, params, /:/);
+	for (param = 1; param <= nr_params; param++) {
+		list = params[param];
+		type = params[param];
+		sub(/\(.*/, "", type);
+		sub(/^\w+\(/, "", list); sub(/\)$/, "", list);
+
+		string = string" (\""type"\"";
+
+		count = split (list, fields, /,/);
+		for (field = 1; field <= count; field++) {
+			string = string" \""fields[field]"\"";
+		}
+
+		string = string")";
+	}
+
+	string = string"))\n";
+}
+	
+/^[^#]/		{ output($0) }
+
+
+END {
+	print "(define libgtop-features";
+	print string"  )";
+	print ")\n";
+
+	print "(define libgtop-feature-names";
+	print names"  )";
+	print ")\n";
+}

guile/header.scm

@@ -0,0 +1,440 @@
+;; $Id$
+
+(define cpu-type '(("name"	. "cpu")
+		   ("label"	. "CPU Usage")
+		   ("fields"	. (list
+				   (("name"	. "total")
+				    ("label"	. "Total CPU Usage")
+				    ("type"	. "unsigned long"))
+				   (("name"	. "user")
+				    ("type"	. "unsigned long"))
+				   (("name"	. "nice")
+				    ("type"	. "unsigned long"))
+				   (("name"	. "sys")
+				    ("type"	. "unsigned long"))
+				   (("name"	. "idle")
+				    ("type"	. "unsigned long"))
+				   (("name"	. "name")
+				    ("type"	. "const char")
+				    ("pointer"	. #t))
+				   (("name"	. "test"))
+				   )
+				)
+		   )
+  )
+
+(define main-function
+  (lambda (definition)
+    (letrec ((default-type "unsigned long")
+	     (struct-label-comments #t)
+	     (struct-name-comments #f)
+	     (default-name-tabs-first 3)
+	     (default-name-tabs 4)
+	     (default-type-tabs 2)
+	     (default-comment-tabs 5)
+	     (default-definition-tabs 3)
+	     (default-definition-value-tabs 2)
+	     (default-max-line-length 60)
+	     ;; set default values for unspecified fields
+	     (check-field-definition
+	      (lambda (fields)
+		(let ((newlist (list)))
+		  (for-each
+		   (lambda (field)
+		     (if (not (assoc-ref field "type"))
+			 (set! field (assoc-set! field "type" default-type)))
+		     (if (assoc-ref field "label")
+			 (set! field (assoc-set! field "has-label" #t))
+			 (begin
+			   (set! field (assoc-set! field "label" (assoc-ref field "name")))
+			   (set! field (assoc-set! field "has-label" #f))
+			   )
+			 )
+		     (set! newlist (append newlist (list field)))
+		     )
+		   (cdr fields))
+		  (set-cdr! fields newlist)
+		  )
+		)
+	      )
+	     ;; number fields sequentially
+	     (make-field-numbers
+	      (lambda (fields)
+		(let ((pos 0) (newlist (list)))
+		  (for-each
+		   (lambda (field)
+		     (set! field (assoc-set! field "number" pos))
+		     (set! newlist (append newlist (list field)))
+		     (set! pos (+ pos 1))
+		     )
+		   (cdr fields))
+		  (set-cdr! fields newlist)
+		  (set! definition (assoc-set! definition "max-fields" pos))
+		  )
+		)
+	      )
+	     ;; pad string with up to 'tabs' tabs
+	     (tabify-string
+	      (lambda (string tabs)
+		(let ((length (string-length string))
+		      (tlength (* tabs 8)))
+		  (if (> tlength length)
+		      (let* ((diff (- tlength length))
+			     (count (quotient (+ diff 7) 8)))
+			(string-append string
+				       (make-string count #\tab))
+			)
+		      (string-append string
+				     #\space)
+		      )
+		  )
+		)
+	      )
+	     ;; pad string with spaces
+	     (spacify-string
+	      (lambda (string tabs)
+		(let ((length (string-length string))
+		      (tlength (* tabs 8)))
+		  (if (> tlength length)
+		      (string-append string
+				     (make-string (- tlength length) #\space))
+		      (string-append string
+				     #\space)
+		      )
+		  )
+		)
+	      )
+	     ;; creates comment string
+	     (make-comment-string
+	      (lambda (comment)
+		(if comment
+		    (string "/* "
+			    (spacify-string comment
+					    default-comment-tabs)
+			    " */")
+		    (string)
+		    )
+		)
+	      )
+	     ;; create constant for entry (eg. GLIBTOP_CPU_TOTAL)
+	     (entry-constant-name
+	      (lambda (name)
+		(string-upcase! (string "GLIBTOP_"
+					(assoc-ref definition "name")
+					"_"
+					name
+					)
+				)
+		)
+	      )
+	     ;; create text that is displayed as comment along with entry
+	     (entry-comment-text
+	      (lambda (name label)
+		(if label
+		    (if struct-label-comments label #f)
+		    (if struct-name-comments (entry-constant-name name) #f)
+		    )
+		)
+	      )
+	     ;; starts struct definition
+	     (make-struct-definition-head
+	      (lambda ()
+		(let* ((class (assoc-ref definition "name"))
+		       )
+		  (string "struct _glibtop_" class "\n"
+			  "{\n"
+			  )
+		  )
+		)
+	      )
+	     ;; terminates struct definition
+	     (make-struct-definition-tail
+	      (lambda ()
+		(string "};\n\n")
+		)
+	      )
+	     ;; generate struct definition body
+	     (make-struct-definition-body
+	      (lambda (fields)
+		(letrec ((output (string))
+			 (is-first-entry #t)
+			 (current-type #f)
+			 (current-name #f)
+			 (current-label #f)
+			 (current-pointer #f)
+			 ;; close entry (other = next entry is of other type)
+			 (entry-end
+			  (lambda (other)
+			    (let ((old-first is-first-entry))
+			      (set! is-first-entry other)
+			      (if current-type
+				  (string (tabify-string (string (string (if current-pointer "*" ""))
+								 current-name
+								 (string (if other ";" ","))
+								 )
+							 (if old-first
+							     default-name-tabs-first
+							     default-name-tabs
+							     )
+							 )
+					  (make-comment-string (entry-comment-text
+								current-name current-label))
+					  "\n")
+				  (string)
+				  )
+			      )
+			    )
+			  )
+			 ;; start new entry
+			 (entry-start
+			  (lambda (name type)
+			    (if current-type
+				(if (equal? current-type type)
+				    (string (entry-end #f) "\t\t")
+				    (string (entry-end #t) "\t"
+					    (tabify-string type default-type-tabs)
+					    )
+				    )
+				(string "\t"
+					(tabify-string type default-type-tabs)
+					)
+				)
+			    )
+			  )
+			 )
+		  ;; main function
+		  (for-each
+		   (lambda (field)
+		     (let ((name (assoc-ref field "name"))
+			   (type (assoc-ref field "type"))
+			   (pointer (assoc-ref field "pointer"))
+			   (label (if (assoc-ref field "has-label")
+				      (assoc-ref field "label")
+				      #f)
+				  )
+			   )
+		       (set! output (string-append output
+						   (string (entry-start name type))
+						   )
+			     )
+		       ;; save current data
+		       (set! current-type type)
+		       (set! current-name name)
+		       (set! current-label label)
+		       (set! current-pointer pointer)
+		       )
+		     )
+		   (cdr fields))
+		  ;; close last entry
+		  (string-append output (entry-end #t))
+		  )
+		)
+	      )
+	     ;; display complete struct definition
+	     (make-struct-definition
+	      (lambda (fields)
+		(string-append (make-struct-definition-head)
+			       (make-struct-definition-body fields)
+			       (make-struct-definition-tail)
+			       )
+		)
+	      )
+	     ;; make constant definition
+	     (make-const-definition
+	      (lambda (name value comment)
+		(let* ((nstring  (string-upcase! (string "GLIBTOP_" name)))
+		       (tabname  (tabify-string nstring default-definition-tabs))
+		       (tabvalue (if comment
+				     (tabify-string (string value) default-definition-value-tabs)
+				     (string value))
+				 )
+		       (ctext    (make-comment-string comment))
+		       (line     (string "#define " tabname tabvalue ctext "\n"))
+		       )
+		  line)
+		)
+	      )
+	     ;; creates constant definitions
+	     (make-struct-constants
+	      (lambda (fields)
+		(let ((class  (assoc-ref definition "name"))
+		      (output (string))
+		      )
+		  (for-each
+		   (lambda (field)
+		     (let* ((name   (assoc-ref field "name"))
+			    (number (assoc-ref field "number"))
+			    (key    (string class "_" name))
+			    (value  (number->string number))
+			    (label  (if (assoc-ref field "has-label")
+					(assoc-ref field "label")
+					#f)
+				    )
+			    (line   (make-const-definition key
+							   value 
+							   (entry-comment-text name label)
+							   )
+				    )
+			    )
+		       (set! output (string-append output line))
+		       )
+		     )
+		   (cdr fields))
+		  output)
+		)
+	      )
+	     ;; creates definition of maximum constant
+	     (make-struct-max-constant
+	      (lambda ()
+		(let* ((class (assoc-ref definition "name"))
+		       (max   (assoc-ref definition "max-fields"))
+		       )
+		  (make-const-definition (string "MAX_" class)
+					 (number->string max)
+					 #f)
+		  )
+		)
+	      )
+	     ;; adds new list element to string, inserting newline if necessary
+	     (add-to-string
+	      (lambda (output line element separator indent max-length)
+		(let* ((slen (string-length line))
+		       (elen (string-length element))
+		       (tlen (+ slen elen))
+		       (bsep (if separator 
+				 (string separator " ")
+				 (string)
+				 )
+			     )
+		       (nsep (string (if separator separator "") "\n"))
+		       )
+		  (if (and (> slen 0) (> tlen max-length))
+		      (begin
+			(set! output (string-append output line nsep))
+			(set! line (string indent element))
+			)
+		      (set! line (string-append line bsep element))
+		      )
+		  (list output line)
+		  )
+		)
+	      )
+	     ;; create general list definition
+	     (make-general-list-definition
+	      (lambda (fields name symbol line-length make-element-string)
+		(letrec ((class (assoc-ref definition "name"))
+			 (make-general-list-definition-head
+			  (lambda ()
+			    (string "const char *"
+				    "glibtop_"
+				    symbol
+				    "_"
+				    class
+				    " "
+				    "[GLIBTOP_MAX_"
+				    (string-upcase! (string class))
+				    "] = \n{ "
+				    )
+			    )
+			  )
+			 (make-general-list-definition-tail
+			  (lambda ()
+			    (string "\n};\n")
+			    )
+			  )
+			 (make-general-list-definition-body
+			  (lambda ()
+			    (let* ((first #t) (output (string)) (line (string)))
+			      (for-each
+			       (lambda (field)
+				 (let* ((element (assoc-ref field name))
+					(olist   (add-to-string output line
+								(make-element-string element)
+								(if first #f ",")
+								"  "
+								line-length))
+					)
+				   (set! output (car olist))
+				   (set! line (car (cdr olist)))
+				   (set! first #f)
+				   )
+				 )
+			       (cdr fields))
+			      (set! output (string-append output line))
+			      output)
+			    )
+			  )
+			 )
+		  ;; main function
+		  (string-append (make-general-list-definition-head)
+				 (make-general-list-definition-body)
+				 (make-general-list-definition-tail)
+				 )
+		  )
+		)
+	      )
+	     ;; create name list definition
+	     (make-name-list-definition
+	      (lambda (fields)
+		(make-general-list-definition fields
+					      "name"
+					      "names"
+					      default-max-line-length
+					      (lambda (x)
+						(string #\" x #\")
+						)
+					      )
+		)
+	      )
+	     ;; create label list definition
+	     (make-label-list-definition
+	      (lambda (fields)
+		(make-general-list-definition fields
+					      "label"
+					      "labels"
+					      0
+					      (lambda (x)
+						(string "gettext_noop (" #\" x #\" ")")
+						)
+					      )
+		)
+	      )
+	     ;; create description list definition
+	     (make-description-list-definition
+	      (lambda (fields)
+		(make-general-list-definition fields
+					      "description"
+					      "descriptions"
+					      default-max-line-length
+					      (lambda (x)
+						(if x
+						    (string "gettext_noop (" #\" x #\" ")")
+						    (string "NULL")
+						    )
+						)
+					      )
+		)
+	      )
+	     )
+      ;; start of main function
+      (let ((fielddef (assoc-ref definition "fields")))
+	(display fielddef) (newline) (newline)
+	(check-field-definition fielddef)
+	(make-field-numbers fielddef)
+	(display fielddef) (newline) (newline)
+	(display (make-struct-definition fielddef))
+	(display (make-struct-constants fielddef)) (newline)
+	(display (make-struct-max-constant)) (newline) (newline)
+	(display (make-name-list-definition fielddef)) (newline)
+	(display (make-label-list-definition fielddef)) (newline)
+	(display (make-description-list-definition fielddef)) (newline)
+	)
+      )
+    )
+  )
+
+(begin
+  (main-function cpu-type)
+  (newline)
+  )
+

guile/make-docbook.scm

@@ -0,0 +1,346 @@
+;; $Id$
+
+(load "features.scm")
+
+(define sysdeps-list '())
+
+(define type-names '("void"
+		     "int64_t" "u_int64_t" "double"
+		     "int" "char" "const char *"))
+
+(define make-sysdeps-list
+  (lambda ()
+    (letrec ((names (cdr (glibtop-names-sysdeps)))
+	     (labels (cdr (glibtop-labels-sysdeps)))
+	     (descriptions (cdr (glibtop-descriptions-sysdeps)))
+	     )
+      (for-each (lambda (feature)
+		  (let* ((label (car labels))
+			 (description (car descriptions))
+			 (list '())
+			 )
+		    (set! labels (cdr labels))
+		    (set! descriptions (cdr descriptions))
+		    (set! list (assoc-set! list 'name feature))
+		    (set! list (assoc-set! list 'label label))
+		    (set! list (assoc-set! list 'description description))
+		    (set! sysdeps-list (assoc-set! sysdeps-list feature list))
+		    )
+		  )
+		names)
+      )
+    )
+  )
+
+(define make-function-reference
+  (lambda (feature)
+    (let* ((names (eval-string (string "(glibtop-names-" feature ")")))
+	   (types (eval-string (string "(glibtop-types-" feature ")")))
+	   (labels (eval-string (string "(glibtop-labels-" feature ")")))
+	   (sysdeps (assoc-ref sysdeps-list feature))
+	   (retval (car (car (assoc-ref libgtop-features feature))))
+	   (name (assoc-ref sysdeps 'name))
+	   (label (assoc-ref sysdeps 'label))
+	   (description (assoc-ref sysdeps 'description))
+	   (descriptions (eval-string (string "(glibtop-descriptions-" feature ")")))
+	   (feature_nounder (car (assoc-ref libgtop-feature-names feature)))
+	   (decl-list '()) (field-list '())
+
+	   (synopsis-start-string
+	    (string "<para>Automatically generated function synopsis:\n\n"))
+
+	   (section-string
+	    (string "<sect1>\n"
+		    "<title><function>glibtop_get_" feature "()</function> - "
+		    label "</title>\n\n")
+	    )
+
+	   (description-string
+	    (string "<para>\nAutomatically generated description:\n\n"
+		    "<blockquote>\n<literallayout>\n"
+		    description "\n"
+		    "</literallayout>\n</blockquote>\n\n")
+	    )
+	   
+	   (definition-start-string
+	     (string "<para>Automatically generated declaration of "
+		     "<structname>_glibtop_" feature "</structname>:\n\n")
+	     )
+
+	   (param-description-start-string
+	    (string "<para>Automatically generated descriptions of "
+		    "<structname>_glibtop_" feature "</structname>:\n\n")
+	    )
+
+	   (funcsynopsisinfo-string
+	    (string "<funcsynopsisinfo>\n"
+		    "#include &lt;glibtop.h&gt;\n"
+		    "#include &lt;glibtop/" feature ".h&gt;"
+		    "</funcsynopsisinfo>")
+	    )
+
+	   (funcdef-string
+	    (string "<funcdef>" retval " "
+		    "<function>glibtop_get_" feature "_l</function>"
+		    "</funcdef>\n")
+	    )
+
+	   (paramdef-string
+	    (lambda ()
+	      (let ((start (string "<paramdef>glibtop *<parameter>"
+				   "server</parameter>, glibtop_"
+				   feature " *<parameter>" feature
+				   "</parameter>")
+			   )
+		    (param_string (string))
+		    (end (string "\n</paramdef>"))
+		    (param_lists
+		     (cdr (car (assoc-ref libgtop-features feature))))
+		    )
+		(for-each
+		 (lambda (x)
+		   (let ((type (car x))
+			 (params (cdr x))
+			 )
+		     (for-each
+		      (lambda (param)
+			(set! param_string (string param_string
+						   ", " type
+						   " <parameter>"
+						   param
+						   "</parameter>"
+						   )
+			      )
+			)
+		      params)
+		     )
+		   )
+		 param_lists)
+		(string start param_string end))
+	      )
+	    )
+
+	   (funcdef-noserver-string
+	    (string "<funcdef>" retval " "
+		    "<function>glibtop_get_" feature "</function>"
+		    "</funcdef>\n")
+	    )
+
+	   (paramdef-noserver-string
+	    (string "<paramdef>glibtop_" feature " *"
+		    "<parameter>" feature "</parameter>\n"
+		    "</paramdef>")
+	    )
+
+	   (field-name-constant
+	    (lambda (name field)
+	      (string "GLIBTOP_"
+		      (string-upcase! (string name))
+		      "_"
+		      (string-upcase! (string field)))
+	      )
+	    )
+
+	   (make-struct-name
+	    (lambda (type)
+	      (string "glibtop_" (assoc-ref type "name"))
+	      )
+	    )
+	   
+	   (tab-pad-string
+	    (lambda (string tabs)
+	      (let* ((slength (string-length string))
+		     (tlength (* tabs 8)))
+		(string-append string
+			       (make-string 
+				(if (> tlength slength)
+				    (- tlength slength)
+				    1
+				    )
+				#\space))
+		)
+	      )
+	    )
+
+	   (make-field-list
+	     (lambda (name type fields)
+	       (let* ((output (string)) (pos 1))
+		 (map
+		  (lambda (x)
+		    (let* ((sep   (if (= pos (length fields)) ";" ","))
+			   (start (if (= pos 1)
+				      (string "\t"
+					      (tab-pad-string (string type) 2))
+				      (string "\t\t"))
+				  )
+			   (comment (string (if (= pos 1) "" "\t") "/* "
+					    (tab-pad-string
+					     (field-name-constant name (car x)) 4)
+					    " */"))
+			   (field (tab-pad-string
+				   (string-append (string (car x)) sep) 2))
+			   )
+		      (set! pos (+ pos 1))
+		      (string-append start field comment "\n")
+		      )
+		    )
+		  fields)
+		 )
+	       )
+	     )
+
+	   (init-field-list
+	    (lambda ()
+	      (let* ((old-type #f)
+		     (type-list types)
+		     (new-type #f)
+		     (fields (list))
+		     )
+		(for-each
+		 (lambda (x)
+		   (set! new-type (car type-list))
+		   (set! type-list (cdr type-list))
+		   (set! new-type (list-ref type-names new-type))
+		   (if (equal? old-type new-type)
+		       (set-car! fields
+				 (append (list new-type)
+					 (cdr (car fields))
+					 (list (list x))
+					 )
+				 )
+		       (if (equal? old-type #f)
+			   (set! fields (list (list new-type (list x))))
+			   (set! fields (append (list (list new-type (list x))) fields))
+			   )
+		       )
+		   (set! old-type new-type)
+		   )
+		 names)
+		fields)
+	      )
+	    )
+
+	   (make-struct-body
+	    (lambda (type)
+	      (let* ((name   (assoc-ref type "name"))
+		     (data   (assoc-ref type "fields"))
+		     (output (string))
+		     )
+		(for-each
+		 (lambda (y)
+		   (for-each
+		    (lambda (z)
+		      (set! output (string-append output z))
+		      )
+		    y)
+		   )
+		 (map
+		  (lambda (x) (make-field-list name (car x) (cdr x)))
+		  data)
+		 )
+		output)
+	      )
+	    )
+	   
+	   (make-struct
+	    (lambda (type)
+	      (let* ((name   (assoc-ref type "name"))
+		     (data   (assoc-ref type "fields"))
+		     (output (string-append
+			      (tab-pad-string
+			       (string "typedef struct _glibtop_" name)
+			       5)
+			      (string "glibtop_" name ";\n\n"
+				      "struct _glibtop_" name "\n{\n\t"
+				      "u_int64_t\tflags;\n")
+			      )
+			     )
+		     )
+		(string-append output (make-struct-body type) "};\n")
+		)
+	      )
+	    )
+
+	   (make-param-description
+	    (lambda ()
+	      (let* ((label-list labels)
+		     (description-list descriptions)
+		     (output (string))
+		     )
+		(for-each
+		 (lambda (name)
+		   (let* ((label (car label-list))
+			  (description (car description-list))
+			  )
+		     (set! label-list (cdr label-list))
+		     (set! description-list (cdr description-list))
+		     (set! output
+			   (string-append output 
+					  (string "<varlistentry>\n"
+						  "<term><parameter>"
+						  name
+						  "</parameter></term>\n\n"
+						  "<listitem>\n<para>\n"
+						  description "\n\n")
+					  )
+			   )
+		     )
+		   )
+		 names)
+		output)
+	      )
+	    )
+	   
+	   )
+      
+      (set! decl-list (assoc-set! decl-list "name" name))
+      (set! decl-list (assoc-set! decl-list "label" label))
+      (set! decl-list (assoc-set! decl-list "fields" (init-field-list)))
+
+      (string-append section-string
+		     description-string
+		     synopsis-start-string
+		     (string "<blockquote>\n<funcsynopsis>\n")
+		     funcsynopsisinfo-string
+		     funcdef-noserver-string
+		     paramdef-noserver-string
+		     (string "</funcsynopsis>\n")
+		     (string "<funcsynopsis>\n")
+		     funcdef-string
+		     (paramdef-string)
+		     (string "</funcsynopsis>\n</blockquote>\n")
+		     definition-start-string
+		     (string "<blockquote>\n<literallayout>\n")
+		     (make-struct decl-list)
+		     (string "</literallayout>\n</blockquote>\n")
+		     param-description-start-string
+		     "<variablelist>\n\n"
+		     (make-param-description)
+		     "</variablelist>\n\n"
+		     "&include-" feature_nounder ".sgml;\n\n"
+		     )
+      )
+    )
+  )
+
+;; <sect2 id="glibtop-get-cpu">
+;; <title><function>glibtop_get_cpu()</function> - get CPU usage</title>
+;; 
+;; <funcsynopsis>
+;; <funcsynopsisinfo>
+;; #include &lt;glibtop.h>
+;; #include &lt;glibtop/cpu.h></funcsynopsisinfo>
+;; <funcdef>void <function>glibtop_get_cpu</function></funcdef>
+;; <paramdef>glibtop *<parameter>server</parameter>, glibtop_cpu *<parameter>cpu_usage</parameter>
+;; </paramdef></funcsynopsis>
+
+
+
+(begin
+  (make-sysdeps-list)
+  
+  (for-each (lambda (x)
+	      (display (make-function-reference x))
+	      )
+	    (cdr (glibtop-names-sysdeps)))
+  )

guile/make-header.scm

@@ -0,0 +1,195 @@
+(define cpu-type '(("name" . "cpu")
+		   ("label" . "CPU Usage")
+		   ("fields" . (("unsigned long" ("total" "Total CPU Usage")
+						 ("user") ("nice") ("sys") ("idle"))
+				("const char" ("name"))
+				)
+			     )
+		   )
+  )
+
+;; computes constant for struct field (eg. GLIBTOP_CPU_TOTAL)
+
+(define field-name-constant
+  (lambda (name field)
+    (string "GLIBTOP_"
+	    (string-upcase! (string name))
+	    "_"
+	    (string-upcase! (string field)))
+    )
+  )
+
+;; computes structure name (eg. glibtop_cpu)
+
+(define make-struct-name
+  (lambda (type)
+    (string "glibtop_" (assoc-ref type "name"))
+    )
+  )
+
+(define tab-pad-string
+  (lambda (string tabs)
+    (string-append string (make-string (- (* tabs 8) (string-length string)) #\space))
+    )
+  )
+
+(define make-field-list
+  (lambda (name type fields)
+    (let* ((output (string)) (pos 1))
+      (map
+       (lambda (x)
+	 (let* ((sep   (if (= pos (length fields)) ";" ","))
+		(start (if (= pos 1)
+			   (string "\t"
+				   (tab-pad-string (string type) 2))
+			   (string "\t\t"))
+		       )
+		(comment (string (if (= pos 1) "" "\t") "/* "
+				 (tab-pad-string (field-name-constant name (car x)) 3)
+				 " */"))
+		(field (tab-pad-string (string-append (string (car x)) sep) 2))
+		)
+	   (set! pos (+ pos 1))
+	   (string-append start field comment "\n")
+	   )
+	 )
+       fields)
+      )
+    )
+  )
+
+(define make-struct-body
+  (lambda (type)
+    (let* ((name   (assoc-ref type "name"))
+	   (data   (assoc-ref type "fields"))
+	   (output (string))
+	   )
+      (for-each
+       (lambda (y)
+	 (for-each
+	  (lambda (z)
+	    (set! output (string-append output z))
+	    )
+	  y)
+	 )
+       (map
+	(lambda (x) (make-field-list name (car x) (cdr x)))
+	data)
+       )
+      output)
+    )
+  )
+
+(define make-struct
+  (lambda (type)
+    (let* ((name   (assoc-ref type "name"))
+	   (data   (assoc-ref type "fields"))
+	   (output (string-append
+		    (tab-pad-string
+		     (string "typedef struct _glibtop_" name)
+		     5)
+		    (string "glibtop_" name ";\n\n"
+			    "struct glibtop_" name "\n{\n\t"
+			    "unsigned long\tflags;\n")
+		    )
+		   )
+	   )
+      (string-append output (make-struct-body type) "};\n")
+      )
+    )
+  )
+
+(define make-field-name-list
+  (lambda (type)
+    (let* ((name   (assoc-ref type "name"))
+	   (data   (assoc-ref type "fields"))
+	   (return (list))
+	   )
+      (map
+       (lambda (x)
+	 (map
+	  (lambda (y) (set! return (append return (list (car y)))))
+	  (cdr x)
+	  )
+	 )
+       data)
+      return)
+    )
+  )
+
+(define make-field-constants
+  (lambda (type)
+    (let* ((name   (assoc-ref type "name"))
+	   (data   (make-field-name-list type))
+	   (output (string
+		    (tab-pad-string
+		     (string "#define GLIBTOP_MAX_"
+			     (string-upcase! (string name))
+			     ) 5)
+		    (number->string (length data))
+		    "\n\n"
+		    )
+		   )
+	   (pos 0)
+	   )
+      (for-each
+       (lambda (x)
+	 (set! output (string-append output (string
+					     (tab-pad-string
+					      (string "#define GLIBTOP_"
+						      (string-upcase! (string name))
+						      "_"
+						      (string-upcase! (string x))
+						      ) 5)
+					     (number->string pos)
+					     "\n"
+					     )
+				     )
+	       )
+	 (set! pos (+ pos 1))
+	 )
+       data)
+      output)
+    )
+  )
+
+(define make-extern-defs
+  (lambda (type)
+    (let* ((name   (assoc-ref type "name"))
+	   )
+      (string
+       (tab-pad-string (string "extern void glibtop_get_" name) 6)
+       "__P(glibtop *, glibtop_" name " *);\n\n"
+       "#ifdef HAVE_GUILE\n\n"
+       "/* You need to link with -lgtop_guile to get this stuff here. */\n\n"
+       (tab-pad-string (string "extern SCM glibtop_get_" name) 6)
+       "__P(void);\n\n"
+       "#endif /* HAVE_GUILE */\n\n"
+       "#ifdef GLIBTOP_GUILE_NAMES\n\n"
+       "/* You need to link with -lgtop_guile_names to get this stuff here. */\n\n"
+       (tab-pad-string (string "extern SCM glibtop_guile_names_" name) 6)
+       "__P(void);\n"
+       (tab-pad-string (string "extern SCM glibtop_guile_labels_" name) 6)
+       "__P(void);\n"
+       (tab-pad-string (string "extern SCM glibtop_guile_descriptions_" name) 6)
+       "__P(void);\n\n"
+       "#endif /* GLIBTOP_GUILE_NAMES */\n\n"
+       "#ifdef GLIBTOP_NAMES\n\n"
+       "/* You need to link with -lgtop_names to get this stuff here. */\n\n"
+       (tab-pad-string (string "extern const char *glibtop_names_" name) 6)
+       "[];\n"
+       (tab-pad-string (string "extern const char *glibtop_labels_" name) 6)
+       "[];\n"
+       (tab-pad-string (string "extern const char *glibtop_descriptions_" name) 6)
+       "[];\n\n"
+       "#endif /* GLIBTOP_NAMES */\n\n")
+      )
+    )
+  )
+
+(begin
+  (display (make-field-constants cpu-type)) (newline)
+  (display (make-struct cpu-type)) (newline)
+  (display (make-extern-defs cpu-type)) (newline)
+  )
+

include/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/Makefile.am

@@ -0,0 +1,2 @@
+SUBDIRS		= glibtop
+

include/glibtop/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/glibtop/Makefile.am

@@ -0,0 +1,10 @@
+glibtopdir		= $(includedir)/glibtop
+
+glibtop_HEADERS		= close.h loadavg.h prockernel.h procstate.h \
+			  sem_limits.h uptime.h command.h mem.h proclist.h \
+			  proctime.h shm_limits.h version.h cpu.h msg_limits.h \
+			  procmem.h procuid.h swap.h write.h error.h open.h \
+			  procsegment.h read.h sysdeps.h xmalloc.h global.h \
+			  procsignal.h read_data.h union.h types.h gnuserv.h \
+			  parameter.h mountlist.h fsusage.h procmap.h signal.h \
+			  inodedb.h

include/glibtop/close.h

@@ -0,0 +1,36 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_CLOSE_H__
+#define __GLIBTOP_CLOSE_H__
+
+#include <glibtop.h>
+
+__BEGIN_DECLS
+
+extern void glibtop_close_r __P((glibtop *));
+
+extern void glibtop_close_s __P((glibtop *));
+extern void glibtop_close_p __P((glibtop *));
+
+__END_DECLS
+
+#endif

include/glibtop/command.h

@@ -0,0 +1,92 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_COMMAND_H__
+#define __GLIBTOP_COMMAND_H__
+
+#include <glibtop.h>
+#include <glibtop/sysdeps.h>
+#include <glibtop/union.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_CMND_QUIT		0
+#define GLIBTOP_CMND_SYSDEPS		1
+
+#define GLIBTOP_CMND_CPU		2
+#define GLIBTOP_CMND_MEM		3
+#define GLIBTOP_CMND_SWAP		4
+#define GLIBTOP_CMND_UPTIME		5
+#define GLIBTOP_CMND_LOADAVG		6
+#define GLIBTOP_CMND_SHM_LIMITS		7
+#define GLIBTOP_CMND_MSG_LIMITS		8
+#define GLIBTOP_CMND_SEM_LIMITS		9
+#define GLIBTOP_CMND_PROCLIST		10
+
+#define GLIBTOP_CMND_PROC_STATE		11
+#define GLIBTOP_CMND_PROC_UID		12
+#define GLIBTOP_CMND_PROC_MEM		13
+#define GLIBTOP_CMND_PROC_TIME		14
+#define GLIBTOP_CMND_PROC_SIGNAL	15
+#define GLIBTOP_CMND_PROC_KERNEL	16
+#define GLIBTOP_CMND_PROC_SEGMENT	17
+#define GLIBTOP_CMND_PROC_MAP		18
+
+#define GLIBTOP_CMND_MOUNTLIST		19
+#define GLIBTOP_CMND_FSUSAGE		20
+
+#define GLIBTOP_MAX_CMND		21
+
+#define _GLIBTOP_PARAM_SIZE		16
+
+typedef struct _glibtop_command		glibtop_command;
+
+typedef struct _glibtop_response	glibtop_response;
+typedef union  _glibtop_response_union	glibtop_response_union;
+
+struct _glibtop_command
+{
+	u_int64_t	command;
+	u_int64_t	size, data_size;
+	char		parameter [_GLIBTOP_PARAM_SIZE];
+};
+
+union _glibtop_response_union
+{
+	glibtop_union	data;
+	glibtop_sysdeps	sysdeps;
+};
+
+struct _glibtop_response
+{
+	int64_t offset;
+	u_int64_t size, data_size;
+	glibtop_response_union u;
+};
+
+#define glibtop_call(p1, p2, p3, p4)	glibtop_call_r(glibtop_global_server, p1, p2, p3, p4)
+
+extern void *glibtop_call_l __P((glibtop *, unsigned, size_t, void *, size_t, void *));
+extern void *glibtop_call_s __P((glibtop *, unsigned, size_t, void *, size_t, void *));
+
+__END_DECLS
+
+#endif

include/glibtop/cpu.h

@@ -0,0 +1,102 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_CPU_H__
+#define __GLIBTOP_CPU_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_CPU_TOTAL	0
+#define GLIBTOP_CPU_USER	1
+#define GLIBTOP_CPU_NICE	2
+#define GLIBTOP_CPU_SYS		3
+#define GLIBTOP_CPU_IDLE	4
+#define GLIBTOP_CPU_FREQUENCY	5
+
+#define GLIBTOP_MAX_CPU		6
+
+typedef struct _glibtop_cpu	glibtop_cpu;
+
+struct _glibtop_cpu
+{
+	u_int64_t	flags,
+		total,		/* GLIBTOP_CPU_TOTAL		*/
+		user,		/* GLIBTOP_CPU_USER		*/
+		nice,		/* GLIBTOP_CPU_NICE		*/
+		sys,		/* GLIBTOP_CPU_SYS		*/
+		idle,		/* GLIBTOP_CPU_IDLE		*/
+		frequency;	/* GLIBTOP_CPU_FREQUENCY	*/
+};
+
+#define glibtop_get_cpu(cpu)	glibtop_get_cpu_l(glibtop_global_server, cpu)
+
+#if GLIBTOP_SUID_CPU
+#define glibtop_get_cpu_r	glibtop_get_cpu_p
+#else
+#define glibtop_get_cpu_r	glibtop_get_cpu_s
+#endif
+
+extern void glibtop_get_cpu_l __P((glibtop *, glibtop_cpu *));
+
+#if GLIBTOP_SUID_CPU
+extern void glibtop_init_cpu_p __P((glibtop *));
+extern void glibtop_get_cpu_p __P((glibtop *, glibtop_cpu *));
+#else
+extern void glibtop_init_cpu_s __P((glibtop *));
+extern void glibtop_get_cpu_s __P((glibtop *, glibtop_cpu *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_cpu __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_cpu __P((void));
+extern SCM glibtop_guile_types_cpu __P((void));
+extern SCM glibtop_guile_labels_cpu __P((void));
+extern SCM glibtop_guile_descriptions_cpu __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_cpu [];
+extern const unsigned glibtop_types_cpu [];
+extern const char *glibtop_labels_cpu [];
+extern const char *glibtop_descriptions_cpu [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/error.h

@@ -0,0 +1,43 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_ERROR_H__
+#define __GLIBTOP_ERROR_H__
+
+#include <glibtop.h>
+
+__BEGIN_DECLS
+
+#define glibtop_error(p1, args...)	glibtop_error_r(glibtop_global_server , p1 , ## args)
+#define glibtop_warn(p1, args...)	glibtop_warn_r(glibtop_global_server , p1 , ## args)
+
+#define glibtop_error_io(p1, args...)	glibtop_error_io_r(glibtop_global_server , p1 , ## args)
+#define glibtop_warn_io(p1, args...)	glibtop_warn_io_r(glibtop_global_server , p1 , ## args)
+
+extern void glibtop_error_r __P((glibtop *, char *, ...));
+extern void glibtop_warn_r __P((glibtop *, char *, ...));
+
+extern void glibtop_error_io_r __P((glibtop *, char *, ...));
+extern void glibtop_warn_io_r __P((glibtop *, char *, ...));
+
+__END_DECLS
+
+#endif

include/glibtop/fsusage.h

@@ -0,0 +1,90 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_FSUSAGE_H__
+#define __GLIBTOP_FSUSAGE_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_FSUSAGE_BLOCKS		0
+#define GLIBTOP_FSUSAGE_BFREE		1
+#define GLIBTOP_FSUSAGE_BAVAIL		2
+#define GLIBTOP_FSUSAGE_FILES		3
+#define GLIBTOP_FSUSAGE_FFREE		4
+
+#define GLIBTOP_MAX_FSUSAGE		5
+
+typedef struct _glibtop_fsusage		glibtop_fsusage;
+
+struct _glibtop_fsusage
+{
+	u_int64_t	flags,
+		blocks,		/* Total blocks. */
+		bfree,		/* Free blocks available to superuser. */
+		bavail,		/* Free blocks available to non-superuser. */
+		files,		/* Total file nodes. */
+		ffree;		/* Free file nodes. */
+};
+
+#define glibtop_get_fsusage(fsusage,disk)	glibtop_get_fsusage_l(glibtop_global_server, fsusage, disk)
+
+#define glibtop_get_fsusage_r		glibtop_get_fsusage_s
+
+extern void glibtop_get_fsusage_l __P((glibtop *, glibtop_fsusage *, const char *));
+
+extern void glibtop_get_fsusage_s __P((glibtop *, glibtop_fsusage *, const char *));
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_fsusage __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_fsusage __P((void));
+extern SCM glibtop_guile_types_fsusage __P((void));
+extern SCM glibtop_guile_labels_fsusage __P((void));
+extern SCM glibtop_guile_descriptions_fsusage __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_fsusage [];
+extern const unsigned glibtop_types_fsusage [];
+extern const char *glibtop_labels_fsusage [];
+extern const char *glibtop_descriptions_fsusage [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/global.h

@@ -0,0 +1,120 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_GLOBAL_H__
+#define __GLIBTOP_GLOBAL_H__
+
+#include <config.h>
+
+/* __BEGIN_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use __END_DECLS at
+   the end of C declarations. */
+   
+#undef __BEGIN_DECLS
+#undef __END_DECLS
+#ifdef __cplusplus
+# define __BEGIN_DECLS extern "C" {
+# define __END_DECLS }
+#else
+# define __BEGIN_DECLS /* empty */
+# define __END_DECLS /* empty */
+#endif
+
+/* __P is a macro used to wrap function prototypes, so that compilers
+   that don't understand ANSI C prototypes still work, and ANSI C
+   compilers can issue warnings about type mismatches. */
+
+#undef __P
+#if defined (__STDC__) || defined (_AIX) \
+|| (defined (__mips) && defined (_SYSTYPE_SVR4)) \
+     || defined(WIN32) || defined(__cplusplus)
+# define __P(protos) protos
+#else
+# define __P(protos) ()
+#endif
+
+#if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# if HAVE_SYS_TIME_H
+#  include <sys/time.h>
+# else
+#  include <time.h>
+# endif
+#endif
+
+#ifdef NEED_GNOMESUPPORT_H
+#include <gnomesupport.h>
+#endif
+
+#ifdef WITHOUT_GUILE
+#undef GLIBTOP_GUILE
+#undef GLIBTOP_GUILE_NAMES
+#endif
+
+#ifdef GLIBTOP_GUILE
+#include <guile/gh.h>
+#endif
+
+#ifdef _IN_LIBGTOP
+#if (defined HAVE_LIBINTL_H) || (defined HAVE_GETTEXT)
+#include <libintl.h>
+#else
+#include <libgettext.h>
+#endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <stdarg.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_MEMORY_H
+#include <memory.h>
+#endif
+
+#include <string.h>
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <signal.h>
+#include <errno.h>
+
+__BEGIN_DECLS
+
+#ifndef _
+#define _(String) gettext (String)
+#define N_(String) (String)
+#endif
+
+#ifndef HAVE_STRERROR
+extern char *strerror __P((int));
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/gnuserv.h

@@ -0,0 +1,158 @@
+/* -*-C-*-
+
+ Header file for the GNU Emacs server and client C code.
+
+ This file is part of GNU Emacs.
+
+ Copying is permitted under those conditions described by the GNU
+ General Public License.
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+
+ Author: Andy Norman (ange@hplb.hpl.hp.com), based on 
+         'etc/server.c' and 'etc/emacsclient.c' from the 18.52 GNU
+         Emacs distribution.
+
+ Please mail bugs and suggestions to the author at the above address.
+*/
+
+/* HISTORY 
+ * 11-Nov-1990		bristor@simba	
+ *    Added EOT stuff.
+ */
+
+/*
+ * This file incorporates new features added by Bob Weiner <weiner@mot.com>,
+ * Darrell Kindred <dkindred@cmu.edu> and Arup Mukherjee <arup@cmu.edu>.
+ * Please see the note at the end of the README file for details.
+ *
+ * (If gnuserv came bundled with your emacs, the README file is probably
+ * ../etc/gnuserv.README relative to the directory containing this file)
+ */
+
+#if 0
+static char header_rcsid [] = "!Header: gnuserv.h,v 2.4 95/02/16 11:58:11 arup alpha !";
+#endif
+
+#define NO_SHORTNAMES
+
+#define PATCHLEVEL 2
+
+#define NO_SHORTNAMES
+/* gnuserv should not be compiled using SOCKS */
+#define DO_NOT_SOCKSIFY
+#include <glibtop.h>
+#include <glibtop/error.h>
+#undef read
+#undef write
+#undef open
+#undef close
+#undef signal
+
+/* Define the communication method between server and clients:
+ *   You can have either or both kinds of sockets, but you can't mix
+ *   sockets with sysv ipc
+ */
+
+#define INTERNET_DOMAIN_SOCKETS
+#define UNIX_DOMAIN_SOCKETS
+
+/*
+ * Define additional authentication protocols to be used. These methods will
+ * be tried before falling back to the default gnuserv protocol (based on
+ * the GNU_SECURE environment variable). Currently, only MIT-MAGIC-COOKIE-1
+ * is also supported.
+ *
+ * Comment out the next line(s) if you don't want to enable the
+ * appropriate authentication protocol.
+ */
+
+#if defined (HAVE_XAUTH)
+#define AUTH_MAGIC_COOKIE
+#endif /* HAVE_XAUTH */
+
+/*
+ * stuff related to supporting MIT-MAGIC-COOKIE-1
+ */
+
+#define MCOOKIE_SCREEN "42980"   /* screen # to use as the gnuserv cookie */
+#define MCOOKIE_NAME   "MAGIC-1" /* authentication protocol name */
+#define MCOOKIE_X_NAME "MIT-MAGIC-COOKIE-1"  /* as needed by X */
+
+
+#define DEFAUTH_NAME "GNU-SECURE"  /* name of default auth protocol */
+#define AUTH_TIMEOUT  15           /* # seconds to wait for auth data */
+#define AUTH_NAMESZ   15           /* max allows auth protocol name size */
+
+
+/*
+ * Pick a default communication scheme, if none was specified.
+ */
+
+#if !defined(UNIX_DOMAIN_SOCKETS) && !defined(INTERNET_DOMAIN_SOCKETS)
+
+/* BSD systems use Unix Domain sockets by default */
+
+#ifdef BSD
+#define UNIX_DOMAIN_SOCKETS
+#endif
+
+#endif /* No communication method pre-defined */
+
+/*
+ * If you are using SYSV_IPC, you might want to make the buffer size bigger
+ * since it limits the size of requests and responses. Don't make it bigger
+ * than your system's max message size though (usually a couple of k) or else
+ * msgsend will start failing. For sockets, using the system BUFSIZ is usually
+ * what you want. 
+ */
+
+#if defined(INTERNET_DOMAIN_SOCKETS) || defined(UNIX_DOMAIN_SOCKETS)
+#include <sys/socket.h>
+#endif /* INTERNET_DOMAIN_SOCKETS || UNIX_DOMAIN_SOCKETS */
+
+#ifdef INTERNET_DOMAIN_SOCKETS
+#include <netdb.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#define TABLE_SIZE 101		/* The number of entries in the hash table */
+#define HASH(host) host		/* Rather simplistic hash function */
+#define DEFAULT_PORT 21490	/* default port number to use is
+				 * DEFAULT_PORT + uid */
+#endif /* INTERNET_DOMAIN_SOCKETS */
+
+#ifdef UNIX_DOMAIN_SOCKETS
+#include <sys/un.h>
+#define HIDE_UNIX_SOCKET	/* put the unix socket in a protected dir */
+#endif /* UNIX_DOMAIN_SOCKETS */
+
+#define HOSTNAMSZ 255		/* max size of a hostname */
+#define REPLYSIZ 300		/* max size of reply from server to client */
+#undef FALSE
+#define FALSE 0
+#undef TRUE
+#define TRUE 1
+
+/* The casts shut Sun's compiler up and are safe in the context these
+   are actually used. */
+#define max2(x,y) (((int) (x) > (int) (y)) ? (x) : (y))
+#define min2(x,y) (((int) (x) < (int) (y)) ? (x) : (y))
+
+#ifndef _NFILE            /* rough guess at maximum number of open files */
+#define _NFILE 20
+#endif
+
+#define EOT_STR "\004"
+#define EOT_CHR '\004'
+
+/* connection types */
+#define CONN_UNIX     0
+#define CONN_INTERNET 1
+#define CONN_IPC      2
+
+/* function declarations */
+extern int glibtop_make_connection __P((const char *, int, int *));
+
+#ifdef INTERNET_DOMAIN_SOCKETS
+extern long glibtop_internet_addr __P((const char *));
+#endif

include/glibtop/inodedb.h

@@ -0,0 +1,58 @@
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_INODEDB_H__
+#define __GLIBTOP_INODEDB_H__
+
+#include <glibtop.h>
+#include <gdbm.h>
+
+#define GLIBTOP_INODEDB_SYSTEM		1
+#define GLIBTOP_INODEDB_USER		2
+#define GLIBTOP_INODEDB_CACHE		4
+
+#define GLIBTOP_INODEDB_ALL		7
+
+__BEGIN_DECLS
+
+typedef struct _glibtop_inodedb		glibtop_inodedb;
+
+typedef struct _glibtop_inodedb_key	glibtop_inodedb_key;
+
+struct _glibtop_inodedb_key
+{
+	u_int64_t device, inode;
+};
+
+struct _glibtop_inodedb
+{
+	GDBM_FILE system_dbf, user_dbf;
+};
+
+#define glibtop_inodedb_open(p1,p2)	glibtop_inodedb_open_s(glibtop_global_server, p1, p2)
+#define glibtop_inodedb_lookup(p1,p2,p3) glibtop_inodedb_lookup_s(glibtop_global_server, p1, p2, p3)
+#define glibtop_inodedb_close(p1)	glibtop_inodedb_close_s(glibtop_global_server)
+
+extern glibtop_inodedb *glibtop_inodedb_open_s __P((glibtop *, unsigned, unsigned long));
+extern const char *glibtop_inodedb_lookup_s __P((glibtop *, glibtop_inodedb *, u_int64_t, u_int64_t));
+extern void glibtop_inodedb_close_s __P((glibtop *, glibtop_inodedb *));
+
+__END_DECLS
+
+#endif

include/glibtop/loadavg.h

@@ -0,0 +1,98 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_LOADAVG_H__
+#define __GLIBTOP_LOADAVG_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_LOADAVG_LOADAVG		0
+#define GLIBTOP_LOADAVG_NR_RUNNING	1
+#define GLIBTOP_LOADAVG_NR_TASKS	2
+#define GLIBTOP_LOADAVG_LAST_PID	3
+
+#define GLIBTOP_MAX_LOADAVG		4
+
+typedef struct _glibtop_loadavg	glibtop_loadavg;
+
+struct _glibtop_loadavg
+{
+	u_int64_t flags;
+	double loadavg [3];		/* GLIBTOP_LOADAVG_LOADAVG	*/
+	u_int64_t nr_running,		/* GLIBTOP_LOADAVG_NR_RUNNING	*/
+		nr_tasks,		/* GLIBTOP_LOADAVG_NR_TASKS	*/
+		last_pid;		/* GLIBTOP_LOADAVG_LAST_PID	*/
+};
+
+#define glibtop_get_loadavg(loadavg)	glibtop_get_loadavg_l(glibtop_global_server, loadavg)
+
+#if GLIBTOP_SUID_LOADAVG
+#define glibtop_get_loadavg_r		glibtop_get_loadavg_p
+#else
+#define glibtop_get_loadavg_r		glibtop_get_loadavg_s
+#endif
+
+extern void glibtop_get_loadavg_l __P((glibtop *, glibtop_loadavg *));
+
+#if GLIBTOP_SUID_LOADAVG
+extern void glibtop_init_loadavg_p __P((glibtop *));
+extern void glibtop_get_loadavg_p __P((glibtop *, glibtop_loadavg *));
+#else
+extern void glibtop_init_loadavg_s __P((glibtop *));
+extern void glibtop_get_loadavg_s __P((glibtop *, glibtop_loadavg *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_loadavg __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_loadavg __P((void));
+extern SCM glibtop_guile_types_loadavg __P((void));
+extern SCM glibtop_guile_labels_loadavg __P((void));
+extern SCM glibtop_guile_descriptions_loadavg __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_loadavg [];
+extern const unsigned glibtop_types_loadavg [];
+extern const char *glibtop_labels_loadavg [];
+extern const char *glibtop_descriptions_loadavg [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/mem.h

@@ -0,0 +1,106 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_MEM_H__
+#define __GLIBTOP_MEM_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_MEM_TOTAL	0
+#define GLIBTOP_MEM_USED	1
+#define GLIBTOP_MEM_FREE	2
+#define GLIBTOP_MEM_SHARED	3
+#define GLIBTOP_MEM_BUFFER	4
+#define GLIBTOP_MEM_CACHED	5
+#define GLIBTOP_MEM_USER	6
+#define GLIBTOP_MEM_LOCKED	7
+
+#define GLIBTOP_MAX_MEM		8
+
+typedef struct _glibtop_mem	glibtop_mem;
+
+struct _glibtop_mem
+{
+	u_int64_t	flags,
+		total,		/* GLIBTOP_MEM_TOTAL	*/
+		used,		/* GLIBTOP_MEM_USED	*/
+		free,		/* GLIBTOP_MEM_FREE	*/
+		shared,		/* GLIBTOP_MEM_SHARED	*/
+		buffer,		/* GLIBTOP_MEM_BUFFER	*/
+		cached,		/* GLIBTOP_MEM_CACHED	*/
+		user,		/* GLIBTOP_MEM_USER	*/
+		locked;		/* GLIBTOP_MEM_LOCKED	*/
+};
+
+#define glibtop_get_mem(mem)	glibtop_get_mem_l(glibtop_global_server, mem)
+
+#if GLIBTOP_SUID_MEM
+#define glibtop_get_mem_r		glibtop_get_mem_p
+#else
+#define glibtop_get_mem_r		glibtop_get_mem_s
+#endif
+
+extern void glibtop_get_mem_l __P((glibtop *, glibtop_mem *));
+
+#if GLIBTOP_SUID_MEM
+extern void glibtop_init_mem_p __P((glibtop *));
+extern void glibtop_get_mem_p __P((glibtop *, glibtop_mem *));
+#else
+extern void glibtop_init_mem_s __P((glibtop *));
+extern void glibtop_get_mem_s __P((glibtop *, glibtop_mem *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_mem __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_mem __P((void));
+extern SCM glibtop_guile_types_mem __P((void));
+extern SCM glibtop_guile_labels_mem __P((void));
+extern SCM glibtop_guile_descriptions_mem __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_mem [];
+extern const unsigned glibtop_types_mem [];
+extern const char *glibtop_labels_mem [];
+extern const char *glibtop_descriptions_mem [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/mountlist.h

@@ -0,0 +1,96 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_MOUNTLIST_H__
+#define __GLIBTOP_MOUNTLIST_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_MOUNTLIST_NUMBER	0
+#define GLIBTOP_MOUNTLIST_TOTAL		1
+#define GLIBTOP_MOUNTLIST_SIZE		2
+
+#define GLIBTOP_MAX_MOUNTLIST		3
+
+typedef struct _glibtop_mountentry	glibtop_mountentry;
+
+typedef struct _glibtop_mountlist	glibtop_mountlist;
+
+struct _glibtop_mountentry
+{
+	u_int64_t dev;
+	char devname [GLIBTOP_MOUNTENTRY_LEN+1];
+	char mountdir [GLIBTOP_MOUNTENTRY_LEN+1];
+	char type [GLIBTOP_MOUNTENTRY_LEN+1];
+};
+
+struct _glibtop_mountlist
+{
+	u_int64_t	flags,
+		number,			/* GLIBTOP_MOUNTLIST_NUMBER	*/
+		total,			/* GLIBTOP_MOUNTLIST_TOTAL	*/
+		size;			/* GLIBTOP_MOUNTLIST_SIZE	*/
+};
+
+#define glibtop_get_mountlist(mountlist,all_fs)	glibtop_get_mountlist_l(glibtop_global_server, mountlist, all_fs)
+
+#define glibtop_get_mountlist_r		glibtop_get_mountlist_s
+
+extern glibtop_mountentry *glibtop_get_mountlist_l __P((glibtop *, glibtop_mountlist *, int));
+
+extern glibtop_mountentry *glibtop_get_mountlist_s __P((glibtop *, glibtop_mountlist *, int));
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_mountlist __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_mountlist __P((void));
+extern SCM glibtop_guile_types_mountlist __P((void));
+extern SCM glibtop_guile_labels_mountlist __P((void));
+extern SCM glibtop_guile_descriptions_mountlist __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_mountlist [];
+extern const unsigned glibtop_types_mountlist [];
+extern const char *glibtop_labels_mountlist [];
+extern const char *glibtop_descriptions_mountlist [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/msg_limits.h

@@ -0,0 +1,104 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_MSG_LIMITS_H__
+#define __GLIBTOP_MSG_LIMITS_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_IPC_MSGPOOL	0
+#define GLIBTOP_IPC_MSGMAP	1
+#define GLIBTOP_IPC_MSGMAX	2
+#define GLIBTOP_IPC_MSGMNB	3
+#define GLIBTOP_IPC_MSGMNI	4
+#define GLIBTOP_IPC_MSGSSZ	5
+#define GLIBTOP_IPC_MSGTQL	6
+
+#define GLIBTOP_MAX_MSG_LIMITS	7
+
+typedef struct _glibtop_msg_limits	glibtop_msg_limits;
+
+struct _glibtop_msg_limits
+{
+	u_int64_t	flags,
+		msgpool,	/* GLIBTOP_IPC_MSGPOOL	*/
+		msgmap,		/* GLIBTOP_IPC_MSGMAP	*/
+		msgmax,		/* GLIBTOP_IPC_MSGMAX	*/
+		msgmnb,		/* GLIBTOP_IPC_MSGMNB	*/
+		msgmni,		/* GLIBTOP_IPC_MSGMNI	*/
+		msgssz,		/* GLIBTOP_IPC_MSGSSZ	*/
+		msgtql;		/* GLIBTOP_IPC_MSGTQL	*/
+};
+
+#define glibtop_get_msg_limits(msg)	glibtop_get_msg_limits_l(glibtop_global_server, msg)
+
+#if GLIBTOP_SUID_MSG_LIMITS
+#define glibtop_get_msg_limits_r	glibtop_get_msg_limits_p
+#else
+#define glibtop_get_msg_limits_r	glibtop_get_msg_limits_s
+#endif
+
+extern void glibtop_get_msg_limits_l __P((glibtop *, glibtop_msg_limits *));
+
+#if GLIBTOP_SUID_MSG_LIMITS
+extern void glibtop_init_msg_limits_p __P((glibtop *));
+extern void glibtop_get_msg_limits_p __P((glibtop *, glibtop_msg_limits *));
+#else
+extern void glibtop_init_msg_limits_s __P((glibtop *));
+extern void glibtop_get_msg_limits_s __P((glibtop *, glibtop_msg_limits *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_msg_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_msg_limits __P((void));
+extern SCM glibtop_guile_types_msg_limits __P((void));
+extern SCM glibtop_guile_labels_msg_limits __P((void));
+extern SCM glibtop_guile_descriptions_msg_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_msg_limits [];
+extern const unsigned glibtop_types_msg_limits [];
+extern const char *glibtop_labels_msg_limits [];
+extern const char *glibtop_descriptions_msg_limits [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/open.h

@@ -0,0 +1,60 @@
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_OPEN_H__
+#define __GLIBTOP_OPEN_H__
+
+#include <glibtop.h>
+#include <glibtop/read.h>
+#include <glibtop/error.h>
+
+__BEGIN_DECLS
+
+#define _GLIBTOP_INIT_STATE_INIT	0x10000
+#define _GLIBTOP_INIT_STATE_OPEN	0x20000
+#define _GLIBTOP_INIT_STATE_SERVER	0x40000
+#define _GLIBTOP_INIT_STATE_SYSDEPS	0x80000
+
+#define GLIBTOP_INIT_NO_OPEN		1
+#define GLIBTOP_INIT_NO_INIT		2
+
+#define GLIBTOP_FEATURES_NO_SERVER	4
+#define GLIBTOP_FEATURES_EXCEPT		8
+
+#define GLIBTOP_METHOD_DIRECT		1
+#define GLIBTOP_METHOD_PIPE		2
+#define GLIBTOP_METHOD_INET		3
+#define GLIBTOP_METHOD_UNIX		4
+
+#define GLIBTOP_ERROR_METHOD_IGNORE	0
+#define GLIBTOP_ERROR_METHOD_WARN_ONCE	1
+#define GLIBTOP_ERROR_METHOD_WARN	2
+#define GLIBTOP_ERROR_METHOD_ABORT	3
+
+#define GLIBTOP_ERROR_METHOD_DEFAULT	GLIBTOP_ERROR_METHOD_WARN_ONCE
+
+extern void glibtop_open_l __P((glibtop *, const char *, const unsigned long, const unsigned));
+
+extern void glibtop_init_p __P((glibtop *, const unsigned long, const unsigned));
+extern void glibtop_open_p __P((glibtop *, const char *, const unsigned long, const unsigned));
+extern void glibtop_open_s __P((glibtop *, const char *, const unsigned long, const unsigned));
+
+__END_DECLS
+
+#endif

include/glibtop/parameter.h

@@ -0,0 +1,43 @@
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PARAMETER_H__
+#define __GLIBTOP_PARAMETER_H__
+
+#include <glibtop.h>
+#include <glibtop/open.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PARAM_METHOD		1
+#define GLIBTOP_PARAM_FEATURES		2
+#define GLIBTOP_PARAM_COMMAND		3
+#define GLIBTOP_PARAM_HOST		4
+#define GLIBTOP_PARAM_PORT		5
+#define GLIBTOP_PARAM_ERROR_METHOD	6
+
+#define glibtop_get_parameter(p1,p2,p3)	glibtop_get_parameter_l(glibtop_global_server,p1,p2,p3)
+#define glibtop_set_parameter(p1,p2,p3) glibtop_set_parameter_l(glibtop_global_server,p1,p2,p3)
+
+extern size_t	glibtop_get_parameter_l __P((glibtop *, const unsigned, void *, size_t));
+extern void	glibtop_set_parameter_l __P((glibtop *, const unsigned, const void *, size_t));
+
+__END_DECLS
+
+#endif

include/glibtop/prockernel.h

@@ -0,0 +1,115 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCKERNEL_H__
+#define __GLIBTOP_PROCKERNEL_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_KERNEL_K_FLAGS	0
+#define GLIBTOP_PROC_KERNEL_MIN_FLT	1
+#define GLIBTOP_PROC_KERNEL_MAJ_FLT	2
+#define GLIBTOP_PROC_KERNEL_CMIN_FLT	3
+#define GLIBTOP_PROC_KERNEL_CMAJ_FLT	4
+#define GLIBTOP_PROC_KERNEL_KSTK_ESP	5
+#define GLIBTOP_PROC_KERNEL_KSTK_EIP	6
+#define GLIBTOP_PROC_KERNEL_NWCHAN	7
+#define GLIBTOP_PROC_KERNEL_WCHAN	8
+
+#define GLIBTOP_MAX_PROC_KERNEL		9
+
+typedef struct _glibtop_proc_kernel	glibtop_proc_kernel;
+
+/* Kernel stuff */
+
+struct _glibtop_proc_kernel
+{
+	u_int64_t flags;
+	u_int64_t k_flags,	/* kernel flags for the process */
+		min_flt,	/* number of minor page faults since
+				 * process start */
+		maj_flt,	/* number of major page faults since
+				 * process start */
+		cmin_flt,	/* cumulative min_flt of process and
+				 * child processes */
+		cmaj_flt,	/* cumulative maj_flt of process and
+				 * child processes */
+		kstk_esp,	/* kernel stack pointer */
+		kstk_eip,	/* kernel stack pointer */
+		nwchan;		/* address of kernel wait channel
+				 * proc is sleeping in */
+	char wchan [40];
+};
+
+#define glibtop_get_proc_kernel(p1, p2)	glibtop_get_proc_kernel_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_KERNEL
+#define glibtop_get_proc_kernel_r	glibtop_get_proc_kernel_p
+#else
+#define glibtop_get_proc_kernel_r	glibtop_get_proc_kernel_s
+#endif
+
+extern void glibtop_get_proc_kernel_l __P((glibtop *, glibtop_proc_kernel *, pid_t));
+
+#if GLIBTOP_SUID_PROC_KERNEL
+extern void glibtop_init_proc_kernel_p __P((glibtop *));
+extern void glibtop_get_proc_kernel_p __P((glibtop *, glibtop_proc_kernel *, pid_t));
+#else
+extern void glibtop_init_proc_kernel_s __P((glibtop *));
+extern void glibtop_get_proc_kernel_s __P((glibtop *, glibtop_proc_kernel *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_kernel __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_types_proc_kernel __P((void));
+extern SCM glibtop_guile_names_proc_kernel __P((void));
+extern SCM glibtop_guile_labels_proc_kernel __P((void));
+extern SCM glibtop_guile_descriptions_proc_kernel __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_kernel [];
+extern const unsigned glibtop_types_proc_kernel [];
+extern const char *glibtop_labels_proc_kernel [];
+extern const char *glibtop_descriptions_proc_kernel [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/proclist.h

@@ -0,0 +1,113 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCLIST_H__
+#define __GLIBTOP_PROCLIST_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROCLIST_NUMBER	0
+#define GLIBTOP_PROCLIST_TOTAL	1
+#define GLIBTOP_PROCLIST_SIZE	2
+
+#define GLIBTOP_MAX_PROCLIST	3
+
+/* You can use the folowing constants as the `which' member of
+ * glibtop_get_proclist () to specify which processes to fetch. */
+
+#define GLIBTOP_KERN_PROC_ALL		0	/* all processes */
+#define GLIBTOP_KERN_PROC_PID		1
+#define GLIBTOP_KERN_PROC_PGRP		2
+#define GLIBTOP_KERN_PROC_SESSION	3
+#define GLIBTOP_KERN_PROC_TTY		4
+#define GLIBTOP_KERN_PROC_UID		5
+#define GLIBTOP_KERN_PROC_RUID		6
+
+#define GLIBTOP_KERN_PROC_MASK		15
+
+#define GLIBTOP_EXCLUDE_IDLE		0x1000
+#define GLIBTOP_EXCLUDE_SYSTEM		0x2000
+#define GLIBTOP_EXCLUDE_NOTTY		0x4000
+
+typedef struct _glibtop_proclist	glibtop_proclist;
+
+struct _glibtop_proclist
+{
+	u_int64_t	flags,
+		number,			/* GLIBTOP_PROCLIST_NUMBER	*/
+		total,			/* GLIBTOP_PROCLIST_TOTAL	*/
+		size;			/* GLIBTOP_PROCLIST_SIZE	*/
+};
+
+#define glibtop_get_proclist(proclist,which,arg) glibtop_get_proclist_l(glibtop_global_server, proclist, which, arg)
+
+#if GLIBTOP_SUID_PROCLIST
+#define glibtop_get_proclist_r		glibtop_get_proclist_p
+#else
+#define glibtop_get_proclist_r		glibtop_get_proclist_s
+#endif
+
+extern unsigned *glibtop_get_proclist_l __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
+
+#if GLIBTOP_SUID_PROCLIST
+extern void glibtop_init_proclist_p __P((glibtop *));
+extern unsigned *glibtop_get_proclist_p __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
+#else
+extern void glibtop_init_proclist_s __P((glibtop *));
+extern unsigned *glibtop_get_proclist_s __P((glibtop *, glibtop_proclist *, int64_t, int64_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proclist __P((SCM, SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proclist __P((void));
+extern SCM glibtop_guile_types_proclist __P((void));
+extern SCM glibtop_guile_labels_proclist __P((void));
+extern SCM glibtop_guile_descriptions_proclist __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proclist [];
+extern const unsigned glibtop_types_proclist [];
+extern const char *glibtop_labels_proclist [];
+extern const char *glibtop_descriptions_proclist [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procmap.h

@@ -0,0 +1,122 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROC_MAP_H__
+#define __GLIBTOP_PROC_MAP_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_MAP_NUMBER		0
+#define GLIBTOP_PROC_MAP_TOTAL		1
+#define GLIBTOP_PROC_MAP_SIZE		2
+
+#define GLIBTOP_MAX_PROC_MAP		3
+
+#define GLIBTOP_MAP_ENTRY_START		1
+#define GLIBTOP_MAP_ENTRY_END		2
+#define GLIBTOP_MAP_ENTRY_OFFSET	3
+#define GLIBTOP_MAP_ENTRY_PERM		4
+#define GLIBTOP_MAP_ENTRY_INODE		5
+#define GLIBTOP_MAP_ENTRY_DEVICE	6
+#define GLIBTOP_MAP_ENTRY_FILENAME	7
+
+#define GLIBTOP_MAX_MAP_ENTRY		8
+
+#define GLIBTOP_MAP_FILENAME_LEN	215
+
+#define GLIBTOP_MAP_PERM_READ		1
+#define GLIBTOP_MAP_PERM_WRITE		2
+#define GLIBTOP_MAP_PERM_EXECUTE	4
+#define GLIBTOP_MAP_PERM_SHARED		8
+#define GLIBTOP_MAP_PERM_PRIVATE	16
+
+typedef struct _glibtop_map_entry	glibtop_map_entry;
+
+typedef struct _glibtop_proc_map	glibtop_proc_map;
+
+struct _glibtop_map_entry
+{
+	u_int64_t flags, start, end, offset, perm, inode, device;
+	char filename [GLIBTOP_MAP_FILENAME_LEN+1];
+};
+
+struct _glibtop_proc_map
+{
+	u_int64_t	flags,
+		number,			/* GLIBTOP_PROC_MAP_NUMBER	*/
+		total,			/* GLIBTOP_PROC_MAP_TOTAL	*/
+		size;			/* GLIBTOP_PROC_MAP_SIZE	*/
+};
+
+#define glibtop_get_proc_map(proc_map,pid) glibtop_get_proc_map_l(glibtop_global_server, proc_map, pid)
+
+#if GLIBTOP_SUID_PROC_MAP
+#define glibtop_get_proc_map_r		glibtop_get_proc_map_p
+#else
+#define glibtop_get_proc_map_r		glibtop_get_proc_map_s
+#endif
+
+extern glibtop_map_entry *glibtop_get_proc_map_l __P((glibtop *, glibtop_proc_map *, pid_t));
+
+#if GLIBTOP_SUID_PROC_MAP
+extern void glibtop_init_proc_map_p __P((glibtop *));
+extern glibtop_map_entry *glibtop_get_proc_map_p __P((glibtop *, glibtop_proc_map *, pid_t));
+#else
+extern void glibtop_init_proc_map_s __P((glibtop *));
+extern glibtop_map_entry *glibtop_get_proc_map_s __P((glibtop *, glibtop_proc_map *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_map __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_map __P((void));
+extern SCM glibtop_guile_types_proc_map __P((void));
+extern SCM glibtop_guile_labels_proc_map __P((void));
+extern SCM glibtop_guile_descriptions_proc_map __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_map [];
+extern const unsigned glibtop_types_proc_map [];
+extern const char *glibtop_labels_proc_map [];
+extern const char *glibtop_descriptions_proc_map [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procmem.h

@@ -0,0 +1,106 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCMEM_H__
+#define __GLIBTOP_PROCMEM_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_MEM_SIZE		0
+#define GLIBTOP_PROC_MEM_VSIZE		1
+#define GLIBTOP_PROC_MEM_RESIDENT	2
+#define GLIBTOP_PROC_MEM_SHARE		3
+#define GLIBTOP_PROC_MEM_RSS		4
+#define GLIBTOP_PROC_MEM_RSS_RLIM	5
+
+#define GLIBTOP_MAX_PROC_MEM		6
+
+typedef struct _glibtop_proc_mem	glibtop_proc_mem;
+
+/* Memory section */
+
+struct _glibtop_proc_mem
+{
+	u_int64_t	flags,
+		size,		/* total # of pages of memory */
+		vsize,		/* number of pages of virtual memory ... */
+		resident,	/* number of resident set
+				 * (non-swapped) pages (4k) */
+		share,		/* number of pages of shared (mmap'd) memory */
+		rss,		/* resident set size */
+		rss_rlim;	/* current limit (in bytes) of the rss
+				 * of the process; usually 2,147,483,647 */
+};
+
+#define glibtop_get_proc_mem(p1, p2)	glibtop_get_proc_mem_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_MEM
+#define glibtop_get_proc_mem_r		glibtop_get_proc_mem_p
+#else
+#define glibtop_get_proc_mem_r		glibtop_get_proc_mem_s
+#endif
+
+extern void glibtop_get_proc_mem_l __P((glibtop *, glibtop_proc_mem *, pid_t));
+
+#if GLIBTOP_SUID_PROC_MEM
+extern void glibtop_init_proc_mem_p __P((glibtop *));
+extern void glibtop_get_proc_mem_p __P((glibtop *, glibtop_proc_mem *, pid_t));
+#else
+extern void glibtop_init_proc_mem_s __P((glibtop *));
+extern void glibtop_get_proc_mem_s __P((glibtop *, glibtop_proc_mem *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_mem __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_types_proc_mem __P((void));
+extern SCM glibtop_guile_names_proc_mem __P((void));
+extern SCM glibtop_guile_labels_proc_mem __P((void));
+extern SCM glibtop_guile_descriptions_proc_mem __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_mem [];
+extern const unsigned glibtop_types_proc_mem [];
+extern const char *glibtop_labels_proc_mem [];
+extern const char *glibtop_descriptions_proc_mem [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procsegment.h

@@ -0,0 +1,109 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCSEGMENT_H__
+#define __GLIBTOP_PROCSEGMENT_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_SEGMENT_TEXT_RSS		0
+#define GLIBTOP_PROC_SEGMENT_SHLIB_RSS		1
+#define GLIBTOP_PROC_SEGMENT_DATA_RSS		2
+#define GLIBTOP_PROC_SEGMENT_STACK_RSS		3
+#define GLIBTOP_PROC_SEGMENT_DIRTY_SIZE		4
+#define GLIBTOP_PROC_SEGMENT_START_CODE		5
+#define GLIBTOP_PROC_SEGMENT_END_CODE		6
+#define GLIBTOP_PROC_SEGMENT_START_STACK	7
+
+#define GLIBTOP_MAX_PROC_SEGMENT		8
+
+typedef struct _glibtop_proc_segment	glibtop_proc_segment;
+
+/* Segment stuff */
+
+struct _glibtop_proc_segment
+{
+	u_int64_t	flags,
+		text_rss,	/* text resident set size */
+		shlib_rss,	/* shared-lib resident set size */
+		data_rss,	/* data resident set size */
+		stack_rss,	/* stack resident set size */
+		dirty_size,	/* size of dirty pages */
+		start_code,
+				/* address of beginning of code segment */
+		end_code,	/* address of end of code segment */
+		start_stack;	/* address of the bottom of stack segment */
+};
+
+#define glibtop_get_proc_segment(p1, p2)	glibtop_get_proc_segment_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_SEGMENT
+#define glibtop_get_proc_segment_r	glibtop_get_proc_segment_p
+#else
+#define glibtop_get_proc_segment_r	glibtop_get_proc_segment_s
+#endif
+
+extern void glibtop_get_proc_segment_l __P((glibtop *, glibtop_proc_segment *, pid_t));
+
+#if GLIBTOP_SUID_PROC_SEGMENT
+extern void glibtop_init_proc_segment_p __P((glibtop *));
+extern void glibtop_get_proc_segment_p __P((glibtop *, glibtop_proc_segment *, pid_t));
+#else
+extern void glibtop_init_proc_segment_s __P((glibtop *));
+extern void glibtop_get_proc_segment_s __P((glibtop *, glibtop_proc_segment *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_segment __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_segment __P((void));
+extern SCM glibtop_guile_types_proc_segment __P((void));
+extern SCM glibtop_guile_labels_proc_segment __P((void));
+extern SCM glibtop_guile_descriptions_proc_segment __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_segment [];
+extern const unsigned glibtop_types_proc_segment [];
+extern const char *glibtop_labels_proc_segment [];
+extern const char *glibtop_descriptions_proc_segment [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procsignal.h

@@ -0,0 +1,100 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCSIGNAL_H__
+#define __GLIBTOP_PROCSIGNAL_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_SIGNAL_SIGNAL	0
+#define GLIBTOP_PROC_SIGNAL_BLOCKED	1
+#define GLIBTOP_PROC_SIGNAL_SIGIGNORE	2
+#define GLIBTOP_PROC_SIGNAL_SIGCATCH	3
+
+#define GLIBTOP_MAX_PROC_SIGNAL		4
+
+typedef struct _glibtop_proc_signal	glibtop_proc_signal;
+
+/* Signals section */
+
+struct _glibtop_proc_signal
+{
+	u_int64_t	flags,
+		signal,			/* mask of pending signals */
+		blocked,		/* mask of blocked signals */
+		sigignore,		/* mask of ignored signals */
+		sigcatch;		/* mask of caught  signals */
+};
+
+#define glibtop_get_proc_signal(p1, p2)	glibtop_get_proc_signal_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_SIGNAL
+#define glibtop_get_proc_signal_r	glibtop_get_proc_signal_p
+#else
+#define glibtop_get_proc_signal_r	glibtop_get_proc_signal_s
+#endif
+
+extern void glibtop_get_proc_signal_l __P((glibtop *, glibtop_proc_signal *, pid_t));
+
+#if GLIBTOP_SUID_PROC_SIGNAL
+extern void glibtop_init_proc_signal_p __P((glibtop *));
+extern void glibtop_get_proc_signal_p __P((glibtop *, glibtop_proc_signal *, pid_t));
+#else
+extern void glibtop_init_proc_signal_s __P((glibtop *));
+extern void glibtop_get_proc_signal_s __P((glibtop *, glibtop_proc_signal *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_signal __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_signal __P((void));
+extern SCM glibtop_guile_types_proc_signal __P((void));
+extern SCM glibtop_guile_labels_proc_signal __P((void));
+extern SCM glibtop_guile_descriptions_proc_signal __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_signal [];
+extern const unsigned glibtop_types_proc_signal [];
+extern const char *glibtop_labels_proc_signal [];
+extern const char *glibtop_descriptions_proc_signal [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procstate.h

@@ -0,0 +1,107 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCSTATE_H__
+#define __GLIBTOP_PROCSTATE_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_STATE_CMD		0
+#define GLIBTOP_PROC_STATE_STATE	1
+#define GLIBTOP_PROC_STATE_UID		2
+#define GLIBTOP_PROC_STATE_GID		3
+
+#define GLIBTOP_MAX_PROC_STATE		4
+
+typedef struct _glibtop_proc_state	glibtop_proc_state;
+
+/* Name and status */
+
+struct _glibtop_proc_state
+{
+	u_int64_t flags;
+	char cmd[40],		/* basename of executable file in 
+				 * call to exec(2) */
+		state;		/* single-char code for process state
+				 * (S=sleeping) */
+	/* NOTE: when porting the library, TRY HARD to implement the
+	 *       following two fields. */
+	/* IMPORTANT NOTICE: For security reasons, it is extremely important
+	 *                   only to set the flags value for those two
+	 *                   fields if their values are corrent ! */
+	int uid,		/* UID of process */
+		gid;		/* GID of process */
+};
+
+#define glibtop_get_proc_state(p1, p2)	glibtop_get_proc_state_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_STATE
+#define glibtop_get_proc_state_r	glibtop_get_proc_state_p
+#else
+#define glibtop_get_proc_state_r	glibtop_get_proc_state_s
+#endif
+
+extern void glibtop_get_proc_state_l __P((glibtop *, glibtop_proc_state *, pid_t));
+
+#if GLIBTOP_SUID_PROC_STATE
+extern void glibtop_init_proc_state_p __P((glibtop *));
+extern void glibtop_get_proc_state_p __P((glibtop *, glibtop_proc_state *, pid_t));
+#else
+extern void glibtop_init_proc_state_s __P((glibtop *));
+extern void glibtop_get_proc_state_s __P((glibtop *, glibtop_proc_state *, pid_t));
+#endif
+     
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_state __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_state __P((void));
+extern SCM glibtop_guile_types_proc_state __P((void));
+extern SCM glibtop_guile_labels_proc_state __P((void));
+extern SCM glibtop_guile_descriptions_proc_state __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_state [];
+extern const unsigned glibtop_types_proc_state [];
+extern const char *glibtop_labels_proc_state [];
+extern const char *glibtop_descriptions_proc_state [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/proctime.h

@@ -0,0 +1,116 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCTIME_H__
+#define __GLIBTOP_PROCTIME_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_TIME_START_TIME	0
+#define GLIBTOP_PROC_TIME_RTIME		1
+#define GLIBTOP_PROC_TIME_UTIME		2
+#define GLIBTOP_PROC_TIME_STIME		3
+#define GLIBTOP_PROC_TIME_CUTIME	4
+#define GLIBTOP_PROC_TIME_CSTIME	5
+#define GLIBTOP_PROC_TIME_TIMEOUT	6
+#define GLIBTOP_PROC_TIME_IT_REAL_VALUE	7
+#define GLIBTOP_PROC_TIME_FREQUENCY	8
+
+#define GLIBTOP_MAX_PROC_TIME		9
+
+typedef struct _glibtop_proc_time	glibtop_proc_time;
+
+/* Time section */
+
+struct _glibtop_proc_time
+{
+	u_int64_t	flags,
+		start_time,	/* start time of process -- 
+				 * seconds since 1-1-70 */
+		rtime,		/* real time accumulated by process */
+		utime,		/* user-mode CPU time accumulated by process */
+		stime,		/* kernel-mode CPU time accumulated by process */
+		cutime,		/* cumulative utime of process and 
+				 * reaped children */
+		cstime,		/* cumulative stime of process and 
+				 * reaped children */
+		timeout,	/* The time (in jiffies) of the process's
+				 * next timeout */
+		it_real_value,	/* The time (in jiffies) before the
+				 * next SIGALRM is sent to the process
+				 * due to an interval timer. */
+		frequency;	/* Tick frequency. */
+};
+
+#define glibtop_get_proc_time(p1, p2)	glibtop_get_proc_time_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_TIME
+#define glibtop_get_proc_time_r	glibtop_get_proc_time_p
+#else
+#define glibtop_get_proc_time_r	glibtop_get_proc_time_s
+#endif
+
+extern void glibtop_get_proc_time_l __P((glibtop *, glibtop_proc_time *, pid_t));
+
+#if GLIBTOP_SUID_PROC_TIME
+extern void glibtop_init_proc_time_p __P((glibtop *));
+extern void glibtop_get_proc_time_p __P((glibtop *, glibtop_proc_time *, pid_t));
+#else
+extern void glibtop_init_proc_time_s __P((glibtop *));
+extern void glibtop_get_proc_time_s __P((glibtop *, glibtop_proc_time *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_time __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_time __P((void));
+extern SCM glibtop_guile_types_proc_time __P((void));
+extern SCM glibtop_guile_labels_proc_time __P((void));
+extern SCM glibtop_guile_descriptions_proc_time __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_time [];
+extern const unsigned glibtop_types_proc_time [];
+extern const char *glibtop_labels_proc_time [];
+extern const char *glibtop_descriptions_proc_time [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/procuid.h

@@ -0,0 +1,116 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_PROCUID_H__
+#define __GLIBTOP_PROCUID_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_PROC_UID_UID		0
+#define GLIBTOP_PROC_UID_EUID		1
+#define GLIBTOP_PROC_UID_GID		2
+#define GLIBTOP_PROC_UID_EGID		3
+#define GLIBTOP_PROC_UID_PID		4
+#define GLIBTOP_PROC_UID_PPID		5
+#define GLIBTOP_PROC_UID_PGRP		6
+#define GLIBTOP_PROC_UID_SESSION	7
+#define GLIBTOP_PROC_UID_TTY		8
+#define GLIBTOP_PROC_UID_TPGID		9
+#define GLIBTOP_PROC_UID_PRIORITY	10
+#define GLIBTOP_PROC_UID_NICE		11
+
+#define GLIBTOP_MAX_PROC_UID		12
+
+typedef struct _glibtop_proc_uid	glibtop_proc_uid;
+
+/* User, Group, Terminal and session */
+
+struct _glibtop_proc_uid
+{
+	u_int64_t flags;
+	int uid,		/* user id */
+		euid,		/* effective user id */
+		gid,		/* group id */
+		egid,		/* effective group id */
+		pid,		/* process id */
+		ppid,		/* pid of parent process */
+		pgrp,		/* process group id */
+		session,	/* session id */
+		tty,		/* full device number of controlling terminal */
+		tpgid,		/* terminal process group id */
+		priority,	/* kernel scheduling priority */
+		nice;		/* standard unix nice level of process */
+};
+
+#define glibtop_get_proc_uid(p1, p2)	glibtop_get_proc_uid_l(glibtop_global_server, p1, p2)
+
+#if GLIBTOP_SUID_PROC_UID
+#define glibtop_get_proc_uid_r		glibtop_get_proc_uid_p
+#else
+#define glibtop_get_proc_uid_r		glibtop_get_proc_uid_s
+#endif
+
+extern void glibtop_get_proc_uid_l __P((glibtop *, glibtop_proc_uid *, pid_t));
+
+#if GLIBTOP_SUID_PROC_UID
+extern void glibtop_init_proc_uid_p __P((glibtop *));
+extern void glibtop_get_proc_uid_p __P((glibtop *, glibtop_proc_uid *, pid_t));
+#else
+extern void glibtop_init_proc_uid_s __P((glibtop *));
+extern void glibtop_get_proc_uid_s __P((glibtop *, glibtop_proc_uid *, pid_t));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_proc_uid __P((SCM));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_proc_uid __P((void));
+extern SCM glibtop_guile_types_proc_uid __P((void));
+extern SCM glibtop_guile_labels_proc_uid __P((void));
+extern SCM glibtop_guile_descriptions_proc_uid __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_proc_uid [];
+extern const unsigned glibtop_types_proc_uid [];
+extern const char *glibtop_labels_proc_uid [];
+extern const char *glibtop_descriptions_proc_uid [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/read.h

@@ -0,0 +1,37 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_READ_H__
+#define __GLIBTOP_READ_H__
+
+#include <glibtop.h>
+#include <glibtop/error.h>
+
+__BEGIN_DECLS
+
+#define glibtop_read(p1, p2)	glibtop_read(glibtop_global_server, p1, p2)
+
+extern void glibtop_read_l __P((glibtop *, size_t, void *));
+extern void glibtop_read_s __P((glibtop *, size_t, void *));
+
+__END_DECLS
+
+#endif

include/glibtop/read_data.h

@@ -0,0 +1,37 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_READ_DATA_H__
+#define __GLIBTOP_READ_DATA_H__
+
+#include <glibtop.h>
+#include <glibtop/error.h>
+
+__BEGIN_DECLS
+
+#define glibtop_read_data()	glibtop_read_data_r(glibtop_global_server)
+
+extern void *glibtop_read_data_l __P((glibtop *));
+extern void *glibtop_read_data_s __P((glibtop *));
+
+__END_DECLS
+
+#endif

include/glibtop/sem_limits.h

@@ -0,0 +1,110 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_SEM_LIMITS_H__
+#define __GLIBTOP_SEM_LIMITS_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_IPC_SEMMAP	0
+#define GLIBTOP_IPC_SEMMNI	1
+#define GLIBTOP_IPC_SEMMNS	2
+#define GLIBTOP_IPC_SEMMNU	3
+#define GLIBTOP_IPC_SEMMSL	4
+#define GLIBTOP_IPC_SEMOPM	5
+#define GLIBTOP_IPC_SEMUME	6
+#define GLIBTOP_IPC_SEMUSZ	7
+#define GLIBTOP_IPC_SEMVMX	8
+#define GLIBTOP_IPC_SEMAEM	9
+
+#define GLIBTOP_MAX_SEM_LIMITS	10
+
+typedef struct _glibtop_sem_limits	glibtop_sem_limits;
+
+struct _glibtop_sem_limits
+{
+	u_int64_t	flags,
+		semmap,		/* GLIBTOP_IPC_SEMMAP	*/
+		semmni,		/* GLIBTOP_IPC_SEMMNI	*/
+		semmns,		/* GLIBTOP_IPC_SEMMNS	*/
+		semmnu,		/* GLIBTOP_IPC_SEMMNU	*/
+		semmsl,		/* GLIBTOP_IPC_SEMMSL	*/
+		semopm,		/* GLIBTOP_IPC_SEMOPM	*/
+		semume,		/* GLIBTOP_IPC_SEMUME	*/
+		semusz,		/* GLIBTOP_IPC_SEMUSZ	*/
+		semvmx,		/* GLIBTOP_IPC_SEMVMX	*/
+		semaem;		/* GLIBTOP_IPC_SEMAEM	*/
+};
+
+#define glibtop_get_sem_limits(sem)	glibtop_get_sem_limits_l(glibtop_global_server, sem)
+
+#if GLIBTOP_SUID_SEM_LIMITS
+#define glibtop_get_sem_limits_r	glibtop_get_sem_limits_p
+#else
+#define glibtop_get_sem_limits_r	glibtop_get_sem_limits_s
+#endif
+
+extern void glibtop_get_sem_limits_l __P((glibtop *, glibtop_sem_limits *));
+
+#if GLIBTOP_SUID_SEM_LIMITS
+extern void glibtop_init_sem_limits_p __P((glibtop *));
+extern void glibtop_get_sem_limits_p __P((glibtop *, glibtop_sem_limits *));
+#else
+extern void glibtop_init_sem_limits_s __P((glibtop *));
+extern void glibtop_get_sem_limits_s __P((glibtop *, glibtop_sem_limits *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_sem_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_sem_limits __P((void));
+extern SCM glibtop_guile_types_sem_limits __P((void));
+extern SCM glibtop_guile_labels_sem_limits __P((void));
+extern SCM glibtop_guile_descriptions_sem_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_sem_limits [];
+extern const unsigned glibtop_types_sem_limits [];
+extern const char *glibtop_labels_sem_limits [];
+extern const char *glibtop_descriptions_sem_limits [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/shm_limits.h

@@ -0,0 +1,100 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_SHM_LIMITS_H__
+#define __GLIBTOP_SHM_LIMITS_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_IPC_SHMMAX	0
+#define GLIBTOP_IPC_SHMMIN	1
+#define GLIBTOP_IPC_SHMMNI	2
+#define GLIBTOP_IPC_SHMSEG	3
+#define GLIBTOP_IPC_SHMALL	4
+
+#define GLIBTOP_MAX_SHM_LIMITS	5
+
+typedef struct _glibtop_shm_limits	glibtop_shm_limits;
+
+struct _glibtop_shm_limits
+{
+	u_int64_t	flags,
+		shmmax,		/* GLIBTOP_IPC_SHMMAX	*/
+		shmmin,		/* GLIBTOP_IPC_SHMMIN	*/
+		shmmni,		/* GLIBTOP_IPC_SHMMNI	*/
+		shmseg,		/* GLIBTOP_IPC_SHMSEG	*/
+		shmall;		/* GLIBTOP_IPC_SHMALL	*/
+};
+
+#define glibtop_get_shm_limits(shm)	glibtop_get_shm_limits_l(glibtop_global_server, shm)
+
+#if GLIBTOP_SUID_SHM_LIMITS
+#define glibtop_get_shm_limits_r	glibtop_get_shm_limits_p
+#else
+#define glibtop_get_shm_limits_r	glibtop_get_shm_limits_s
+#endif
+
+extern void glibtop_get_shm_limits_l __P((glibtop *, glibtop_shm_limits *));
+
+#if GLIBTOP_SUID_SHM_LIMITS
+extern void glibtop_init_shm_limits_p __P((glibtop *));
+extern void glibtop_get_shm_limits_p __P((glibtop *, glibtop_shm_limits *));
+#else
+extern void glibtop_init_shm_limits_s __P((glibtop *));
+extern void glibtop_get_shm_limits_s __P((glibtop *, glibtop_shm_limits *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_shm_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_shm_limits __P((void));
+extern SCM glibtop_guile_types_shm_limits __P((void));
+extern SCM glibtop_guile_labels_shm_limits __P((void));
+extern SCM glibtop_guile_descriptions_shm_limits __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_shm_limits [];
+extern const unsigned glibtop_types_shm_limits [];
+extern const char *glibtop_labels_shm_limits [];
+extern const char *glibtop_descriptions_shm_limits [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/signal.h

@@ -0,0 +1,45 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_SIGNAL_H__
+#define __GLIBTOP_SIGNAL_H__
+
+#include <glibtop.h>
+
+#ifdef HAVE_SYS_SIGNAL_H
+#include <sys/signal.h>
+#endif
+
+__BEGIN_DECLS
+
+typedef struct _glibtop_signame	glibtop_signame;
+
+struct _glibtop_signame
+{
+	const int number;
+	const char *name, *label;
+};
+
+extern const glibtop_signame glibtop_sys_siglist [];
+
+__END_DECLS
+
+#endif

include/glibtop/swap.h

@@ -0,0 +1,100 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_SWAP_H__
+#define __GLIBTOP_SWAP_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_SWAP_TOTAL	0
+#define GLIBTOP_SWAP_USED	1
+#define GLIBTOP_SWAP_FREE	2
+#define GLIBTOP_SWAP_PAGEIN	3
+#define GLIBTOP_SWAP_PAGEOUT	4
+
+#define GLIBTOP_MAX_SWAP	5
+
+typedef struct _glibtop_swap	glibtop_swap;
+
+struct _glibtop_swap
+{
+	u_int64_t	flags,
+		total,		/* GLIBTOP_SWAP_TOTAL	*/
+		used,		/* GLIBTOP_SWAP_USED	*/
+		free,		/* GLIBTOP_SWAP_FREE	*/
+		pagein,		/* GLIBTOP_SWAP_PAGEIN	*/
+		pageout;	/* GLIBTOP_SWAP_PAGEOUT	*/
+};
+
+#define glibtop_get_swap(swap)	glibtop_get_swap_l(glibtop_global_server, swap)
+
+#if GLIBTOP_SUID_SWAP
+#define glibtop_get_swap_r		glibtop_get_swap_p
+#else
+#define glibtop_get_swap_r		glibtop_get_swap_s
+#endif
+
+extern void glibtop_get_swap_l __P((glibtop *, glibtop_swap *));
+
+#if GLIBTOP_SUID_SWAP
+extern void glibtop_init_swap_p __P((glibtop *));
+extern void glibtop_get_swap_p __P((glibtop *, glibtop_swap *));
+#else
+extern void glibtop_init_swap_s __P((glibtop *));
+extern void glibtop_get_swap_s __P((glibtop *, glibtop_swap *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_swap __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_swap __P((void));
+extern SCM glibtop_guile_types_swap __P((void));
+extern SCM glibtop_guile_labels_swap __P((void));
+extern SCM glibtop_guile_descriptions_swap __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_swap [];
+extern const unsigned glibtop_types_swap [];
+extern const char *glibtop_labels_swap [];
+extern const char *glibtop_descriptions_swap [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/sysdeps.h

@@ -0,0 +1,121 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_SYSDEPS_H__
+#define __GLIBTOP_SYSDEPS_H__
+
+#include <glibtop.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_SYSDEPS_FEATURES	0
+#define GLIBTOP_SYSDEPS_CPU		1
+#define GLIBTOP_SYSDEPS_MEM		2
+#define GLIBTOP_SYSDEPS_SWAP		3
+#define GLIBTOP_SYSDEPS_UPTIME		4
+#define GLIBTOP_SYSDEPS_LOADAVG		5
+#define GLIBTOP_SYSDEPS_SHM_LIMITS	6
+#define GLIBTOP_SYSDEPS_MSG_LIMITS	7
+#define GLIBTOP_SYSDEPS_SEM_LIMITS	8
+#define GLIBTOP_SYSDEPS_PROCLIST	9
+#define GLIBTOP_SYSDEPS_PROC_STATE	10
+#define GLIBTOP_SYSDEPS_PROC_UID	11
+#define GLIBTOP_SYSDEPS_PROC_MEM	12
+#define GLIBTOP_SYSDEPS_PROC_TIME	13
+#define GLIBTOP_SYSDEPS_PROC_SIGNAL	14
+#define GLIBTOP_SYSDEPS_PROC_KERNEL	15
+#define GLIBTOP_SYSDEPS_PROC_SEGMENT	16
+#define GLIBTOP_SYSDEPS_PROC_MAP	17
+#define GLIBTOP_SYSDEPS_MOUNTLIST	18
+#define GLIBTOP_SYSDEPS_FSUSAGE		19
+
+#define GLIBTOP_MAX_SYSDEPS		20
+
+#define GLIBTOP_SYSDEPS_ALL		((1 << GLIBTOP_MAX_SYSDEPS) - 1)
+
+typedef void (*glibtop_init_func_t) (glibtop *);
+extern glibtop_init_func_t _glibtop_init_hook_s [];
+extern glibtop_init_func_t _glibtop_init_hook_p [];
+
+typedef struct _glibtop_sysdeps	glibtop_sysdeps;
+
+struct _glibtop_sysdeps
+{
+	u_int64_t flags,
+		features,		/* server features	*/
+		cpu,			/* glibtop_cpu		*/
+		mem,			/* glibtop_mem		*/
+		swap,			/* glibtop_swap		*/
+		uptime,			/* glibtop_uptime	*/
+		loadavg,		/* glibtop_loadavg	*/
+		shm_limits,		/* glibtop_shm_limits	*/
+		msg_limits,		/* glibtop_msg_limits	*/
+		sem_limits,		/* glibtop_sem_limits	*/
+		proclist,		/* glibtop_proclist	*/
+		proc_state,		/* glibtop_proc_state	*/
+		proc_uid,		/* glibtop_proc_uid	*/
+		proc_mem,		/* glibtop_proc_mem	*/
+		proc_time,		/* glibtop_proc_time	*/
+		proc_signal,		/* glibtop_proc_signal	*/
+		proc_kernel,		/* glibtop_proc_kernel	*/
+		proc_segment,		/* glibtop_proc_segment	*/
+		proc_map,		/* glibtop_proc_map	*/
+		mountlist,		/* glibtop_mountlist	*/
+		fsusage;		/* glibtop_fsusage	*/
+};
+
+#define glibtop_get_sysdeps(sysdeps)	glibtop_get_sysdeps_r(glibtop_global_server,sysdeps)
+
+extern void glibtop_get_sysdeps_r __P((glibtop *, glibtop_sysdeps *));
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_sysdeps __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_sysdeps __P((void));
+extern SCM glibtop_guile_types_sysdeps __P((void));
+extern SCM glibtop_guile_labels_sysdeps __P((void));
+extern SCM glibtop_guile_descriptions_sysdeps __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_sysdeps [];
+extern const unsigned glibtop_types_sysdeps [];
+extern const char *glibtop_labels_sysdeps [];
+extern const char *glibtop_descriptions_sysdeps [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/types.h

@@ -0,0 +1,36 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_TYPES_H__
+#define __GLIBTOP_TYPES_H__
+
+__BEGIN_DECLS
+
+#define GLIBTOP_TYPE_LONG	1
+#define GLIBTOP_TYPE_ULONG	2
+#define GLIBTOP_TYPE_DOUBLE	3
+#define GLIBTOP_TYPE_INT	4
+#define GLIBTOP_TYPE_CHAR	5
+#define GLIBTOP_TYPE_STRING	6
+
+__END_DECLS
+
+#endif

include/glibtop/union.h

@@ -0,0 +1,76 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_UNION_H__
+#define __GLIBTOP_UNION_H__
+
+#include <glibtop/cpu.h>
+#include <glibtop/mem.h>
+#include <glibtop/swap.h>
+#include <glibtop/uptime.h>
+#include <glibtop/loadavg.h>
+#include <glibtop/shm_limits.h>
+#include <glibtop/msg_limits.h>
+#include <glibtop/sem_limits.h>
+#include <glibtop/proclist.h>
+
+#include <glibtop/procstate.h>
+#include <glibtop/procuid.h>
+#include <glibtop/procmem.h>
+#include <glibtop/proctime.h>
+#include <glibtop/procsignal.h>
+#include <glibtop/prockernel.h>
+#include <glibtop/procsegment.h>
+#include <glibtop/procmap.h>
+
+#include <glibtop/mountlist.h>
+#include <glibtop/fsusage.h>
+
+__BEGIN_DECLS
+
+typedef union _glibtop_union	glibtop_union;
+
+union _glibtop_union
+{
+	glibtop_cpu		cpu;
+	glibtop_mem		mem;
+	glibtop_swap		swap;
+	glibtop_uptime		uptime;
+	glibtop_loadavg		loadavg;
+	glibtop_shm_limits	shm_limits;
+	glibtop_msg_limits	msg_limits;
+	glibtop_sem_limits	sem_limits;
+	glibtop_proclist	proclist;
+	glibtop_proc_state	proc_state;
+	glibtop_proc_uid	proc_uid;
+	glibtop_proc_mem	proc_mem;
+	glibtop_proc_time	proc_time;
+	glibtop_proc_signal	proc_signal;
+	glibtop_proc_kernel	proc_kernel;
+	glibtop_proc_segment	proc_segment;
+	glibtop_proc_map	proc_map;
+	glibtop_mountlist	mountlist;
+	glibtop_fsusage		fsusage;
+};
+
+__END_DECLS
+
+#endif

include/glibtop/uptime.h

@@ -0,0 +1,94 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_UPTIME_H__
+#define __GLIBTOP_UPTIME_H__
+
+#include <glibtop.h>
+#include <glibtop/global.h>
+
+__BEGIN_DECLS
+
+#define GLIBTOP_UPTIME_UPTIME		0
+#define GLIBTOP_UPTIME_IDLETIME		1
+
+#define GLIBTOP_MAX_UPTIME		2
+
+typedef struct _glibtop_uptime	glibtop_uptime;
+
+struct _glibtop_uptime
+{
+	u_int64_t flags;
+	double uptime,		/* GLIBTOP_UPTIME_UPTIME	*/
+		idletime;	/* GLIBTOP_UPTIME_IDLETIME	*/
+};
+
+#define glibtop_get_uptime(uptime)	glibtop_get_uptime_l(glibtop_global_server, uptime)
+
+#if GLIBTOP_SUID_UPTIME
+#define glibtop_get_uptime_r		glibtop_get_uptime_p
+#else
+#define glibtop_get_uptime_r		glibtop_get_uptime_s
+#endif
+
+extern void glibtop_get_uptime_l __P((glibtop *, glibtop_uptime *));
+
+#if GLIBTOP_SUID_UPTIME
+extern void glibtop_init_uptime_p __P((glibtop *));
+extern void glibtop_get_uptime_p __P((glibtop *, glibtop_uptime *));
+#else
+extern void glibtop_init_uptime_s __P((glibtop *));
+extern void glibtop_get_uptime_s __P((glibtop *, glibtop_uptime *));
+#endif
+
+#ifdef GLIBTOP_GUILE
+
+/* You need to link with -lgtop_guile to get this stuff here. */
+
+extern SCM glibtop_guile_get_uptime __P((void));
+
+#endif
+
+#ifdef GLIBTOP_GUILE_NAMES
+
+/* You need to link with -lgtop_guile_names to get this stuff here. */
+
+extern SCM glibtop_guile_names_uptime __P((void));
+extern SCM glibtop_guile_types_uptime __P((void));
+extern SCM glibtop_guile_labels_uptime __P((void));
+extern SCM glibtop_guile_descriptions_uptime __P((void));
+
+#endif
+
+#ifdef GLIBTOP_NAMES
+
+/* You need to link with -lgtop_names to get this stuff here. */
+
+extern const char *glibtop_names_uptime [];
+extern const unsigned glibtop_types_uptime [];
+extern const char *glibtop_labels_uptime [];
+extern const char *glibtop_descriptions_uptime [];
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/version.h

@@ -0,0 +1,40 @@
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_VERSION_H__
+#define __GLIBTOP_VERSION_H__
+
+#include <glibtop.h>
+#include <glibtop/union.h>
+#include <glibtop/sysdeps.h>
+#include <glibtop/command.h>
+
+#define LIBGTOP_VERSION_STRING "Libgtop %s server version %s (%u,%u,%u,%u)."
+
+__BEGIN_DECLS
+
+#if _IN_LIBGTOP
+
+extern void glibtop_send_version __P((glibtop *, int));
+
+#endif
+
+__END_DECLS
+
+#endif

include/glibtop/write.h

@@ -0,0 +1,37 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_WRITE_H__
+#define __GLIBTOP_WRITE_H__
+
+#include <glibtop.h>
+#include <glibtop/error.h>
+
+__BEGIN_DECLS
+
+#define glibtop_write(p1, p2)	glibtop_write(glibtop_global_server, p1, p2)
+
+extern void glibtop_write_l __P((glibtop *, size_t, void *));
+extern void glibtop_write_s __P((glibtop *, size_t, void *));
+
+__END_DECLS
+
+#endif

include/glibtop/xmalloc.h

@@ -0,0 +1,44 @@
+/* $Id$ */
+
+/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the Gnome Top Library.
+   Contributed by Martin Baulig <martin@home-of-linux.org>, April 1998.
+
+   The Gnome Top Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The Gnome Top Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __GLIBTOP_XMALLOC_H__
+#define __GLIBTOP_XMALLOC_H__
+
+#include <glibtop.h>
+#include <glibtop/error.h>
+
+__BEGIN_DECLS
+
+#define glibtop_malloc(p1)	glibtop_malloc_r(glibtop_global_server, p1)
+#define glibtop_calloc(p1, p2)	glibtop_calloc_r(glibtop_global_server, p1, p2)
+#define glibtop_realloc(p1, p2)	glibtop_realloc_r(glibtop_global_server, p1, p2)
+#define glibtop_strdup(p1)	glibtop_strdup_r(glibtop_global_server, p1)
+#define glibtop_free(p1)	glibtop_free_r(glibtop_global_server, p1)
+
+extern void *glibtop_malloc_r	__P((glibtop *, size_t));
+extern void *glibtop_calloc_r	__P((glibtop *, size_t, size_t));
+extern void *glibtop_realloc_r	__P((glibtop *, void *, size_t));
+extern char *glibtop_strdup_r	__P((glibtop *, const char *));
+extern void glibtop_free_r	__P((glibtop *, void *));
+
+__END_DECLS
+
+#endif