New upstream version 4.17.3

Makefile.am

@@ -1,7 +1,5 @@
 ## Process this file with automake to produce Makefile.in
 
-EXTRA_DIST = NEWS README
-
 SUBDIRS = lib
 
 if ENABLE_SUBIDS
@@ -16,7 +14,7 @@ endif
 
 CLEANFILES = man/8.out man/po/remove-potcdate.* man/*/login.defs.d man/*/*.mo
 
-EXTRA_DIST = tests/
+EXTRA_DIST = NEWS README tests/
 
 dist-hook:
 	chmod -R u+w $(distdir)/tests

Makefile.in

@@ -243,7 +243,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@
@@ -390,10 +389,10 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-EXTRA_DIST = tests/
 SUBDIRS = lib $(am__append_1) src po contrib doc etc tests/unit \
 	$(am__append_2)
 CLEANFILES = man/8.out man/po/remove-potcdate.* man/*/login.defs.d man/*/*.mo
+EXTRA_DIST = NEWS README tests/
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 

aclocal.m4

@@ -22,15 +22,14 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
 
 # ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
 #
-#   Copyright (C) 1999-2008, 2011-2019, 2021-2022 Free Software
-#   Foundation, Inc.
+#   Copyright (C) 1999-2008, 2011-2015 Free Software Foundation, Inc.
 #   Written by Thomas Tanner, 1999
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 21 LTDL_INIT
+# serial 20 LTDL_INIT
 
 # LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
 # ------------------------------------------
@@ -358,7 +357,7 @@ AC_CONFIG_COMMANDS_PRE([
     if test -n "$_LT_LIBOBJS"; then
       # Remove the extension.
       _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
-      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | $SED "$_lt_sed_drop_objext" | sort -u`; do
+      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
         _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
         _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
       done
@@ -496,7 +495,7 @@ AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
     # If you are looking for one http://www.opendarwin.org/projects/dlcompat
     lt_cv_sys_dlopen_deplibs=yes
     ;;
-  freebsd* | dragonfly* | midnightbsd*)
+  freebsd* | dragonfly*)
     lt_cv_sys_dlopen_deplibs=yes
     ;;
   gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -931,8 +930,8 @@ AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
 
-# pkg.m4 - Macros to locate and use pkg-config.   -*- Autoconf -*-
-# serial 12 (pkg-config-0.29.2)
+# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+# serial 11 (pkg-config-0.29.1)
 
 dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
 dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
@@ -974,7 +973,7 @@ dnl
 dnl See the "Since" comment for each macro you use to see what version
 dnl of the macros you require.
 m4_defun([PKG_PREREQ],
-[m4_define([PKG_MACROS_VERSION], [0.29.2])
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
 m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
     [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
 ])dnl PKG_PREREQ
@@ -1019,7 +1018,7 @@ dnl Check to see whether a particular set of modules exists. Similar to
 dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
 dnl
 dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-dnl only at the first occurrence in configure.ac, so if the first place
+dnl only at the first occurence in configure.ac, so if the first place
 dnl it's called might be skipped (such as if it is within an "if", you
 dnl have to call PKG_CHECK_EXISTS manually
 AC_DEFUN([PKG_CHECK_EXISTS],
@@ -1075,7 +1074,7 @@ AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
 AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
 
 pkg_failed=no
-AC_MSG_CHECKING([for $2])
+AC_MSG_CHECKING([for $1])
 
 _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
 _PKG_CONFIG([$1][_LIBS], [libs], [$2])
@@ -1085,17 +1084,17 @@ and $1[]_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.])
 
 if test $pkg_failed = yes; then
-        AC_MSG_RESULT([no])
+   	AC_MSG_RESULT([no])
         _PKG_SHORT_ERRORS_SUPPORTED
         if test $_pkg_short_errors_supported = yes; then
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
-        else
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
-        m4_default([$4], [AC_MSG_ERROR(
+	m4_default([$4], [AC_MSG_ERROR(
 [Package requirements ($2) were not met:
 
 $$1_PKG_ERRORS
@@ -1106,8 +1105,8 @@ installed software in a non-standard prefix.
 _PKG_TEXT])[]dnl
         ])
 elif test $pkg_failed = untried; then
-        AC_MSG_RESULT([no])
-        m4_default([$4], [AC_MSG_FAILURE(
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
 [The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
@@ -1117,10 +1116,10 @@ _PKG_TEXT
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
         ])
 else
-        $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-        $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
         AC_MSG_RESULT([yes])
-        $3
+	$3
 fi[]dnl
 ])dnl PKG_CHECK_MODULES
 

config.h.in

@@ -20,10 +20,6 @@
 /* Path for faillog file. */
 #undef FAILLOG_FILE
 
-/* Define to the type of elements in the array set by `getgroups'. Usually
-   this is either `int' or `gid_t'. */
-#undef GETGROUPS_T
-
 /* max group name length */
 #undef GROUP_NAME_MAX_LENGTH
 
@@ -53,9 +49,6 @@
    the CoreFoundation framework. */
 #undef HAVE_CFPREFERENCESCOPYAPPVALUE
 
-/* Define to 1 if you have the <crypt.h> header file. */
-#undef HAVE_CRYPT_H
-
 /* Define if the GNU dcgettext() function is already present or preinstalled.
    */
 #undef HAVE_DCGETTEXT
@@ -119,24 +112,15 @@
 /* Define to 1 if you have the `getusershell' function. */
 #undef HAVE_GETUSERSHELL
 
-/* Define to 1 if you have the <gshadow.h> header file. */
-#undef HAVE_GSHADOW_H
-
 /* Define if you have the iconv() function and it works. */
 #undef HAVE_ICONV
 
-/* Define to 1 if you have the `initgroups' function. */
-#undef HAVE_INITGROUPS
-
 /* Define to 1 if you have the `innetgr' function. */
 #undef HAVE_INNETGR
 
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
-/* Define to 1 if you have the <lastlog.h> header file. */
-#undef HAVE_LASTLOG_H
-
 /* Define to 1 if you have the `lckpwdf' function. */
 #undef HAVE_LCKPWDF
 
@@ -164,9 +148,6 @@
 /* Define to 1 if you have the <minix/config.h> header file. */
 #undef HAVE_MINIX_CONFIG_H
 
-/* Define to 1 if you have the <paths.h> header file. */
-#undef HAVE_PATHS_H
-
 /* Define to 1 if you have the `putgrent' function. */
 #undef HAVE_PUTGRENT
 
@@ -179,9 +160,6 @@
 /* Define to 1 if you have the <readpassphrase.h> header file. */
 #undef HAVE_READPASSPHRASE_H
 
-/* Define to 1 if you have the <rpc/key_prot.h> header file. */
-#undef HAVE_RPC_KEY_PROT_H
-
 /* Define to 1 if you have the `rpmatch' function. */
 #undef HAVE_RPMATCH
 
@@ -197,9 +175,6 @@
 /* Define to 1 if you have the <semanage/semanage.h> header file. */
 #undef HAVE_SEMANAGE_SEMANAGE_H
 
-/* Define to 1 if you have the `setgroups' function. */
-#undef HAVE_SETGROUPS
-
 /* Define to 1 if you have the `sgetgrent' function. */
 #undef HAVE_SGETGRENT
 
@@ -209,12 +184,6 @@
 /* Define to 1 if you have the `sgetspent' function. */
 #undef HAVE_SGETSPENT
 
-/* Define to 1 if you have the <sgtty.h> header file. */
-#undef HAVE_SGTTY_H
-
-/* Have working shadow group support in libc */
-#undef HAVE_SHADOWGRP
-
 /* Define if you have the shl_load function. */
 #undef HAVE_SHL_LOAD
 
@@ -260,15 +229,6 @@
 /* Define to 1 if `ut_xtime' is a member of `struct utmpx'. */
 #undef HAVE_STRUCT_UTMPX_UT_XTIME
 
-/* Define to 1 if you have the <sys/capability.h> header file. */
-#undef HAVE_SYS_CAPABILITY_H
-
-/* Define to 1 if you have the <sys/ioctl.h> header file. */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define to 1 if you have the <sys/random.h> header file. */
-#undef HAVE_SYS_RANDOM_H
-
 /* Define to 1 if you have the <sys/statfs.h> header file. */
 #undef HAVE_SYS_STATFS_H
 
@@ -281,9 +241,6 @@
 /* Define to 1 if you have the <tcb.h> header file. */
 #undef HAVE_TCB_H
 
-/* Define to 1 if you have the <termio.h> header file. */
-#undef HAVE_TERMIO_H
-
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
@@ -296,9 +253,6 @@
 /* Define to 1 if `utime(file, NULL)' sets file's timestamp to the present. */
 #undef HAVE_UTIME_NULL
 
-/* Define to 1 if you have the <utmp.h> header file. */
-#undef HAVE_UTMP_H
-
 /* Define to support vendor settings. */
 #undef HAVE_VENDORDIR
 
@@ -341,12 +295,6 @@
 /* Path to passwd program. */
 #undef PASSWD_PROGRAM
 
-/* Define if login should support the -r flag for rlogind. */
-#undef RLOGIN
-
-/* Define to the ruserok() "success" return value (0 or 1). */
-#undef RUSEROK
-
 /* Define to support the shadow group file. */
 #undef SHADOWGRP
 
@@ -523,9 +471,3 @@
 
 /* Path for wtmp file. */
 #undef _WTMP_FILE
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef gid_t
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef uid_t

configure.ac

@@ -1,10 +1,10 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_PREREQ([2.69])
-m4_define([libsubid_abi_major], 4)
+m4_define([libsubid_abi_major], 5)
 m4_define([libsubid_abi_minor], 0)
 m4_define([libsubid_abi_micro], 0)
 m4_define([libsubid_abi], [libsubid_abi_major.libsubid_abi_minor.libsubid_abi_micro])
-AC_INIT([shadow], [4.15.3], [pkg-shadow-devel@lists.alioth.debian.org], [],
+AC_INIT([shadow], [4.17.3], [pkg-shadow-devel@lists.alioth.debian.org], [],
 	[https://github.com/shadow-maint/shadow])
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects tar-pax])
 AC_CONFIG_MACRO_DIRS([m4])
@@ -36,20 +36,13 @@ LT_LIB_DLLOAD
 
 dnl Checks for libraries.
 
-dnl Checks for header files.
-AC_CHECK_HEADERS(crypt.h utmp.h \
-	termio.h sgtty.h sys/ioctl.h paths.h \
-	sys/capability.h sys/random.h \
-	gshadow.h lastlog.h rpc/key_prot.h acl/libacl.h \
-	attr/libattr.h attr/error_context.h)
-
 dnl shadow now uses the libc's shadow implementation
 AC_CHECK_HEADER([shadow.h],,[AC_MSG_ERROR([You need a libc with shadow.h])])
 
 AC_CHECK_FUNCS(arc4random_buf futimes \
 	getentropy getrandom getspnam getusershell \
-	initgroups lckpwdf lutimes \
-	setgroups updwtmpx innetgr \
+	lckpwdf lutimes \
+	updwtmpx innetgr \
 	getspnam_r \
 	rpmatch \
 	memset_explicit explicit_bzero stpecpy stpeprintf)
@@ -66,7 +59,6 @@ AC_CHECK_MEMBERS([struct utmpx.ut_name,
                   struct utmpx.ut_xtime],,,[[#include <utmpx.h>]])
 
 dnl Checks for library functions.
-AC_TYPE_GETGROUPS
 AC_FUNC_UTIME_NULL
 AC_REPLACE_FUNCS(putgrent putpwent putspent)
 AC_REPLACE_FUNCS(sgetgrent sgetpwent sgetspent)
@@ -76,33 +68,6 @@ AC_CHECK_FUNC(secure_getenv, [AC_DEFINE(HAS_SECURE_GETENV,
                                         1,
                                         [Defined to 1 if you have the declaration of 'secure_getenv'])])
 
-if test "$ac_cv_header_shadow_h" = "yes"; then
-	AC_CACHE_CHECK(for working shadow group support,
-		ac_cv_libc_shadowgrp,
-		AC_RUN_IFELSE([AC_LANG_SOURCE([
-				#include <shadow.h>
-				#ifdef HAVE_GSHADOW_H
-				#include <gshadow.h>
-				#endif
-				int
-				main()
-				{
-					struct sgrp *sg = sgetsgent("test:x::");
-					/* NYS libc on Red Hat 3.0.3 has broken shadow group support */
-					return !sg || !sg->sg_adm || !sg->sg_mem;
-				}]
-			)],
-			[ac_cv_libc_shadowgrp=yes],
-			[ac_cv_libc_shadowgrp=no],
-			[ac_cv_libc_shadowgrp=no]
-		)
-	)
-
-	if test "$ac_cv_libc_shadowgrp" = "yes"; then
-		AC_DEFINE(HAVE_SHADOWGRP, 1, [Have working shadow group support in libc])
-	fi
-fi
-
 AC_CACHE_CHECK([location of shared mail directory], shadow_cv_maildir,
 [for shadow_cv_maildir in /var/mail /var/spool/mail /usr/spool/mail /usr/mail none; do
 	if test -d $shadow_cv_maildir; then
@@ -159,13 +124,6 @@ fi])
 AC_DEFINE_UNQUOTED(PASSWD_PROGRAM, "$shadow_cv_passwd_dir/passwd",
 	[Path to passwd program.])
 
-dnl XXX - quick hack, should disappear before anyone notices :).
-dnl XXX - I just read the above message :).
-if test "$ac_cv_func_ruserok" = "yes"; then
-	AC_DEFINE(RLOGIN, 1, [Define if login should support the -r flag for rlogind.])
-	AC_DEFINE(RUSEROK, 0, [Define to the ruserok() "success" return value (0 or 1).])
-fi
-
 AC_ARG_ENABLE(shadowgrp,
 	[AS_HELP_STRING([--enable-shadowgrp], [enable shadow group support @<:@default=yes@:>@])],
 	[case "${enableval}" in
@@ -696,7 +654,7 @@ AC_SUBST(LIBMD)
 if test "$with_skey" = "yes"; then
 	AC_CHECK_LIB(md, MD5Init, [LIBMD=-lmd])
 	AC_CHECK_LIB(skey, skeychallenge, [LIBSKEY=-lskey],
-		[AC_MSG_ERROR([liskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2])])
+		[AC_MSG_ERROR([libskey missing. You can download S/Key source code from http://rsync1.it.gentoo.org/gentoo/distfiles/skey-1.1.5.tar.bz2])])
 	AC_DEFINE(SKEY, 1, [Define to support S/Key logins.])
 	AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 		#include <stdio.h>

contrib/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

contrib/adduser.c

@@ -118,6 +118,9 @@
 #include <sys/stat.h>
 #include <syslog.h>
 
+#include "string/strcmp/streq.h"
+
+
 #define IMMEDIATE_CHANGE	/* Expire newly created password, must be changed
 				 * immediately upon next login */
 #define HAVE_QUOTAS		/* Obvious */
@@ -291,12 +294,10 @@ main (void)
 	  printf ("Home Directory [%s/%s]: ", DEFAULT_HOME, usrname);
 	  fflush (stdout);
 	  safeget (dir, sizeof (dir));
-	  if (!strlen (dir))
-	    {			/* hit return */
-	      sprintf (dir, "%s/%s", DEFAULT_HOME, usrname);
-	    }
+	  if (!strlen(dir))  /* hit return */
+	    sprintf(dir, "%s/%s", DEFAULT_HOME, usrname);
 	  else if (dir[strlen (dir) - 1] == '/')
-	    sprintf (dir+strlen(dir), "%s", usrname);
+	    strcat(dir, usrname);
 	}
       else
 	{
@@ -308,7 +309,7 @@ main (void)
       fflush (stdout);
       safeget (shell, sizeof (shell));
       if (!strlen (shell))
-	sprintf (shell, "%s", DEFAULT_SHELL);
+	strcpy(shell, DEFAULT_SHELL);
       else
 	{
 	  char *sh;
@@ -316,7 +317,7 @@ main (void)
 #ifdef HAVE_GETUSERSHELL
 	  setusershell ();
 	  while ((sh = getusershell ()) != NULL)
-	    if (!strcmp (shell, sh))
+	    if (streq(shell, sh))
 	      ok = 1;
 	  endusershell ();
 #endif
@@ -327,7 +328,7 @@ main (void)
 	      else
 		{
 		  printf ("Shell NOT in /etc/shells, DEFAULT used\n");
-		  sprintf (shell, "%s", DEFAULT_SHELL);
+		  strcpy(shell, DEFAULT_SHELL);
 		}
 	    }
 	}
@@ -491,12 +492,12 @@ safeget (char *buf, int maxlen)
       bad = (!isalnum (c) && (c != '_') && (c != ' '));
       *(buf++) = c;
     }
-  *buf = '\0';
+  stpcpy(buf, "");
 
   if (bad)
     {
       printf ("\nString contained banned character. Please stick to alphanumerics.\n");
-      *bstart = '\0';
+      stpcpy(bstart, "");
     }
 }
 

debian/Makefile

@@ -1,16 +0,0 @@
-PKG=shadow
-SITE=ftp://pkg-shadow.alioth.debian.org/pub/pkg-shadow/
-
-deb:: check_cheese
-
-include /usr/share/quilt/quilt.debbuild.mk
-
-check_cheese:
-	@dpkg-parsechangelog | grep -q "\* The \".*\".* release\." || { \
-		echo ""; \
-		echo " **                                  **"; \
-		echo " **  Warning: not a cheesy release!  **"; \
-		echo " **                                  **"; \
-		echo ""; \
-		exit 1; \
-	}

debian/NEWS

@@ -1,62 +0,0 @@
-shadow (1:4.13+dfsg1-2) unstable; urgency=medium
-
-  The previous entry falsely states that PREVENT_NO_AUTH in /etc/login.defs
-  affects authentication.  The historical default of letting all users with
-  empty password field in without authentication is still in effect.
-
- -- Balint Reczey <balint@balintreczey.hu>  Mon, 25 Sep 2023 17:04:09 +0200
-
-shadow (1:4.11.1+dfsg1-0exp1) experimental; urgency=medium
-
-  Login now prevents an empty password field to be interpreted as
-  "no authentication required" for UID 0 (root account).
-  The historical default of letting all users with empty password field
-  in without authentication can be restored in /etc/login.defs setting
-  PREVENT_NO_AUTH to "no".
-
- -- Balint Reczey <balint@balintreczey.hu>  Sun, 07 Nov 2021 21:51:46 +0100
-
-shadow (1:4.7-1) unstable; urgency=medium
-
-  * /etc/securetty is no longer shipped by this package and it is no longer
-    honored in login's PAM configuration by default. Please see #731656 for the
-    details.
-
- -- Balint Reczey <rbalint@ubuntu.com>  Thu, 20 Jun 2019 13:46:52 +0200
-
-shadow (1:4.0.15-5) unstable; urgency=low
-
-  * commands passed in argument to su must use su's -c option and must quote
-    the command if it contains a space, as in:
-        su - root -c "ls -l /"
-    The following commands won't work anymore:
-        su - root -c ls -l /
-        su - root "ls -l /"
-        su - root ls -l /
-
- -- Christian Perrier <bubulle@debian.org>  Sat,  8 Apr 2006 20:11:38 +0200
-
-shadow (1:4.0.14-1) unstable; urgency=low
-
-  * passwd does not support the -f, -s, and -g options anymore. You should use
-    the chfn, chsh and gpasswd utilities instead.
-  * login now distributes the nologin utility, which can be used as a shell
-    to politely refuse a login
-
- -- Christian Perrier <bubulle@debian.org>  Thu,  5 Jan 2006 08:47:44 +0100
-
-shadow (1:4.0.12-1) unstable; urgency=low
-
-  CLOSE_SESSIONS and other variables are not used anymore in
-  /etc/login/defs.
-  As shadow utilities which use this file now warn about unknown
-  entries there, administrators should remove such unknown entries.
-  The supplied login.defs file does not include them anymore.
-
-  dpasswd is no more distributed by upstream. Login do not support
-  dialup password anymore.  Re-introducing this functionality in
-  upstream is not trivial.
-
-
- -- Christian Perrier <bubulle@debian.org>  Thu, 25 Aug 2005 08:38:47 +0200
-

debian/README.Debian

@@ -1,62 +0,0 @@
-Read this file first for a brief overview of the new versions of login
-and passwd.
-
-
----Shadow passwords
-
-The command `shadowconfig on' will turn on shadow password support.
-`shadowconfig off' will turn it back off.  If you turn on shadow
-password support, you'll gain the ability to set password ages and
-expirations with chage(1).
-
-NOTE: If you use the nscd package, you may have problems with a
-slight delay in updating the password information. You may notice
-this during upgrades of certain packages that try to add a system
-user and then access the users information immediately afterwards.
-To avoid this, it is suggested that you stop the nscd daemon before
-upgrades, then restart it again.
-
----General configuration
-
-Most of the configuration for the shadow utilities is in
-/etc/login.defs.  See login.defs(5).  The defaults are quite
-reasonable.
-
-Also see the /etc/pam.d/* files for each program to configure the PAM
-support. PAM documentation is available in several formats in the
-libpam-doc package.
-
-
----MD5 Encryption
-
-This is enabled now using the /etc/pam.d/* files. Examples are given.
-
-
----Adding users and groups
-
-Though you may add users and groups with the SysV type commands,
-useradd and groupadd, I recommend you add them with Debian adduser
-version 3+.  adduser gives you more configuration and conforms to the
-Debian UID and GID allocation.
-
-Editing user and group parameters can be done with usermod and
-groupmod.  Removing users and groups can be done with userdel and
-groupdel.
-
-
---- Group administration
-
-Local group allocation is much easier.  With gpasswd(1) you can
-designate users to administer groups.  They can then securely add or
-remove users from the group.
-
-
---- What to read next?
-
-Read the manpages, the other files in this directory, and the Shadow
-Password HOWTO (included in the doc-linux package).  A large portion
-of these files deals with getting shadow installed.  You can, of
-course, ignore those parts.
-
-Also, the libpam-doc package will go a long way to allowing you to take
-full advantage of the PAM authentication scheme.

debian/README.source

@@ -1,8 +0,0 @@
-If you update the translation of upsteam files (thank you for that!) please
-submit a pull request upstream instead of filing a bug in the Debian BTS
-to get it reviewed and accepted faster.
-
-A testsuite is also available. Instruction on how to run this testsuite
-are available in tests/README
-
- -- Balint Reczey <balint@balintreczey.hu>, Mon, 31 Jan 2022 14:07:11 +0100

debian/TODO

@@ -1,19 +0,0 @@
-Things that should be done:
- * Verify the files left in debian/tmp
-   + e.g. /etc/default/adduser should be installed
- * Check the build system: rebuilding the package twoce in the same tree
-   doubles the size of the diff.gz file
-
-Other points (not related to the release of a syncronized shadow):
- * compare the source with the usages and man pages
-   + probably add a sentence to chsh/chfn's manpages about authentication
-     required for ordinary users
- * do something (a tool) for the variables in login.defs
-   In Debian, some tools are not compiled with the PAM support, so upstream
-   getdef.c won't be OK.
-   It should be nice to see in each man page the set of variables used.
-   The Debian package can now compile (export DEB_BUILD_OPTIONS='nostrip debug')
-   with the debugging informations. This may be used to extract the set of
-   variables used in Debian/for each tools.
- * verify all the patches around (I've found patches for at least RedHat,
-   OWL, LFS, Mandriva, Gentoo; are they already applied?)

debian/bugs-usertags

@@ -1,25 +0,0 @@
-This described the usertags used by the team.
-
-For usertags documentation, see
-http://lists.debian.org/debian-devel-announce/2005/09/msg00002.html
-
-All bugs tagged by team members must be tagged with 
-"user pkg-shadow-devel@lists.alioth.debian.org"
-
-Tags list
----------
-
-toclose:         This bug has been announced to be closed in case no more news
-                 or information is received from the bug submitter or someone
-                 else until the delay specified in the limits_YYYYMMDD tag
-
-limits-YYYYMMDD: combine it with "toclose". Specifies the date after which
-                 bugs can be closed without other action in case no news 
-                 is received
-
-manpages-replace A bug reported angainst a manpages-xx package to indicate
-                 conflicting man pages. This tag can be used to tune the
-                 Replaces fields.
-
-su-transition:   This bug is related to the su transition (#276419)
-

debian/control

@@ -1,102 +0,0 @@
-Source: shadow
-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Uploaders:
- Serge Hallyn <serge@hallyn.com>,
- Chris Hofstaedtler <zeha@debian.org>
-Section: admin
-Priority: required
-Build-Depends:
- bison,
- debhelper-compat (= 13),
- dh-package-notes,
- dh-sequence-zz-debputy-rrr (>= 0.1.23~),
- docbook-xml <!nodoc>,
- docbook-xsl <!nodoc>,
- gettext,
- itstool <!nodoc>,
- libacl1-dev,
- libattr1-dev,
- libaudit-dev [linux-any],
- libbsd-dev,
- libcrypt-dev,
- libcmocka-dev <!nocheck>,
- libltdl-dev,
- libpam0g-dev,
- libselinux1-dev [linux-any],
- libsemanage-dev [linux-any],
- libsystemd-dev [linux-any],
- libxml2-utils <!nodoc>,
- pkgconf,
- quilt,
- systemd-dev [linux-any],
- xsltproc <!nodoc>
-Standards-Version: 4.7.0
-Vcs-Git: https://salsa.debian.org/debian/shadow.git -b master
-Vcs-Browser: https://salsa.debian.org/debian/shadow
-Homepage: https://github.com/shadow-maint/shadow
-Rules-Requires-Root: no
-
-Package: passwd
-Architecture: any
-Multi-Arch: foreign
-Depends:
- base-passwd (>= 3.6.4),
- libpam-modules,
- login
-Recommends:
- sensible-utils
-Description: change and administer password and group data
- This package includes passwd, chsh, chfn, and many other programs to
- maintain password and group data.
- .
- Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
-
-Package: login
-Architecture: any
-Multi-Arch: foreign
-Protected: yes
-Depends:
- libpam-modules,
- libpam-runtime
-Breaks:
- hurd (<< 20140206~) [hurd-any]
-Conflicts:
- python-4suite (<< 0.99cvs20060405-1)
-Replaces:
- hurd (<< 20140206~) [hurd-any]
-Description: system login tools
- This package provides support for console-based logins and for
- changing effective user or group IDs, including:
-  * login, the program that invokes a user shell on a virtual terminal;
-  * nologin, a dummy shell for disabled user accounts;
-
-Package: uidmap
-Architecture: any
-Multi-Arch: foreign
-Priority: optional
-Description: programs to help use subuids
- These programs help unprivileged users to create uid and gid mappings in
- user namespaces.
-
-Package: libsubid4
-Section: libs
-Priority: optional
-Architecture: any
-Multi-Arch: same
-Description: subordinate id handling library -- shared library
- The library provides an interface for querying, granding and ungranting
- subordinate user and group ids.
-
-Package: libsubid-dev
-Section: libdevel
-Priority: optional
-Architecture: any
-Multi-Arch: same
-Depends:
- libsubid4 (= ${binary:Version})
-Description: subordinate id handling library -- shared library
- The library provides an interface for querying, granding and ungranting
- subordinate user and group ids.
- .
- This package contains the C header files that are
- needed for applications to use the libsubid4 library.

debian/copyright

@@ -1,191 +0,0 @@
-Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: Shadow
-Source: https://github.com/shadow-maint/shadow
-
-Files: *
-Copyright: 1989-1994, Julianne Frances Haugh
-           2016-2022, Serge Hallyn <serge@hallyn.com>
-License: BSD-3-clause
-
-Files: man/po/da.po
-       man/po/de.po
-       man/tr/man1/su.1
-       po/da.po
-       po/de.po
-       po/es.po
-       po/eu.po
-       po/fi.po
-       po/gl.po
-       po/it.po
-       po/kk.po
-       po/nb.po
-       po/nl.po
-       po/nn.po
-       po/pl.po
-       po/pt_BR.po
-       po/ru.po
-       po/sq.po
-       po/sv.po
-       po/vi.po
-Copyright: 1999-2015, Free Software Foundation, Inc
-License: BSD-3-clause
-
-Files: man/fi/man1/chfn.1
-       man/id/man1/*
-       man/ko/man1/chfn.1
-       man/ko/man1/chsh.1
-       man/tr/man1/chfn.1
-       man/zh_TW/man1/chfn.1
-       man/zh_TW/man1/chsh.1
-Copyright: 1994, salvatore valente <svalente@athena.mit.edu>
-License: GPL-1
-
-Files: man/pt_BR/man8/*
-       man/zh_TW/man8/usermod.8
-Copyright: 1991-1994, Julianne Frances Haugh
-License: BSD-3-clause
-
-Files: man/hu/man1/gpasswd.1
-       man/ja/man1/gpasswd.1
-       man/pt_BR/man1/*
-Copyright: 1996, Rafal Maszkowski <rzm@pdi.net>
-License: BSD-3-clause
-
-Files: man/id/man1/login.1
-       man/ko/man1/login.1
-       man/tr/man1/login.1
-Copyright: 1993, Rickard E. Faith <faith@cs.unc.edu>
-License: BSD-3-clause
-
-Files: man/ja/man1/groups.1
-       man/ja/man5/limits.5
-       man/ja/man8/vipw.8
-Copyright: 2001, Maki KURODA
-License: BSD-3-clause
-
-Files: man/pt_BR/man5/passwd.5
-       man/tr/man5/passwd.5
-Copyright: 1993, Michael Haardt <michael@moria.de>
-License: GPL-2+
-
-Files: man/ja/man1/chage.1
-       man/ja/man5/suauth.5
-Copyright: 1997, Kazuyoshi Furutaka
-License: BSD-3-clause
-
-Files: man/po/fr.po
-       po/fr.po
-Copyright: 2011-2013, Debian French l10n team <debian-l10n-french@lists.debian.org>
-License: BSD-3-clause
-
-Files: man/zh_TW/man5/*
-Copyright: 1993, Michael Haardt <michael@moria.de>
-           1993, Scorpio, www.linuxforum.net
-License: GPL-2+
-
-Files: man/hu/man5/*
-Copyright: 1993, Michael Haardt <u31b3hs@pool.informatik.rwth-aachen.de>
-License: GPL-2+
-
-Files: contrib/adduser2.sh
-Copyright: 1996, Petri Mattila, Prihateam Networks <petri@prihateam.fi>
-License: GPL-2+
-
-Files: lib/subordinateio.h
-Copyright: 2012, Eric W. Biederman
-License: BSD-3-clause
-
-Files: man/hu/man1/su.1
-Copyright: 1999, Ragnar Hojland Espinosa <ragnar@macula.net>
-License: BSD-3-clause
-
-Files: man/ja/man1/id.1
-Copyright: 2000, ISHIKAWA Keisuke
-License: BSD-3-clause
-
-Files: man/ja/man8/pwconv.8
-Copyright: 2001, Yuichi SATO
-License: BSD-3-clause
-
-Files: src/login_nopam.c
-Copyright: 1995, Wietse Venema
-License: BSD-3-clause
-
-Files: src/su.c
-Copyright: 1989 - 1994, Julianne Frances Haugh
-           1996 - 2000, Marek Michałkiewicz
-           2000 - 2006, Tomasz Kłoczko
-           2007 - 2013, Nicolas François
-License: GPL-2+
-
-Files: src/vipw.c
-Copyright: 1997, Guy Maor <maor@ece.utexas.edu>
-           1999 - 2000, Marek Michałkiewicz
-           2002 - 2006, Tomasz Kłoczko
-           2007 - 2013, Nicolas François
-License: GPL-2+
-
-Files: man/ko/man5/*
-Copyright: 2000, ASPLINUX <man@asp-linux.co.kr>
-License: GPL-2+
-
-Files: debian/*
-Copyright: 1999-2001, Ben Collins <bcollins@debian.org>
-           2001-2004 Karl Ramm <kcr@debian.org>
-           2004-2014 Christian Perrier <bubulle@debian.org>
-           2006-2012 Nicolas Francois (Nekral) <nicolas.francois@centraliens.net>
-           2017-2022 Balint Reczey <balint@balintreczey.hu>
-License: BSD-3-clause
-
-Files: debian/patches/cppw-Add-tool.patch
-Copyright: 1997, Guy Maor <maor@ece.utexas.edu>
-           1999, Stephen Frost <sfrost@snowman.net>
-License: GPL-2+
-
-Files: debian/passwd.expire.cron
-Copyright: 1999, Ben Collins <bcollins@debian.org>
-License: BSD-3-clause
-
-License: BSD-3-clause
- All rights reserved.
- .
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 1. Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
- 3. Neither the name of the University nor the names of its contributors
-    may be used to endorse or promote products derived from this software
-    without specific prior written permission.
- .
- THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- SUCH DAMAGE.
-
-License: GPL-1
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 1
- .
- On Debian systems, the complete text of version 1 of the GNU General
- Public License can be found in '/usr/share/common-licenses/GPL-1'.
-
-License: GPL-2+
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 dated June, 1991, or (at
- your option) any later version.
- .
- On Debian systems, the complete text of version 2 of the GNU General
- Public License can be found in '/usr/share/common-licenses/GPL-2'.

debian/cpgr.8

@@ -1 +0,0 @@
-.so man8/cppw.8

debian/cppw.8

@@ -1,27 +0,0 @@
-.TH CPPW 8 "7 Apr 2005"
-.SH NAME
-cppw, cpgr \- copy with locking the given file to the password or group file
-.SH SYNOPSIS
-\fBcppw\fR [\fB\-h\fR] [\fB\-s\fR] password_file
-.br
-\fBcpgr\fR [\fB\-h\fR] [\fB\-s\fR] group_file
-
-.SH DESCRIPTION
-.BR cppw " and " cpgr
-will copy, with locking, the given file to
-.IR /etc/passwd " and " /etc/group ", respectively."
-With the \fB\-s\fR flag, they will copy the shadow versions of those files,
-.IR /etc/shadow " and " /etc/gshadow ", respectively."
-
-With the \fB\-h\fR flag, the commands display a short help message and exit
-silently.
-.SH "SEE ALSO"
-.BR vipw (8),
-.BR vigr (8),
-.BR group (5),
-.BR passwd (5),
-.BR shadow (5),
-.BR gshadow (5)
-.SH AUTHOR
-\fBcppw\fR and \fBcpgr\fR were written by Stephen Frost, based on
-\fBvipw\fR and \fBvigr\fR written by Guy Maor.

debian/debputy.manifest

@@ -1,37 +0,0 @@
-manifest-version: '0.1'
-packages:
-  passwd:
-    transformations:
-    - path-metadata:
-        path: usr/bin/chfn
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/chsh
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/gpasswd
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/passwd
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/chage
-        group: "shadow"
-        mode: "u=rwx,go=rxs"
-    - path-metadata:
-        path: usr/bin/expiry
-        group: "shadow"
-        mode: "u=rwx,go=rxs"
-  login:
-    transformations:
-    - path-metadata:
-        path: usr/bin/newgrp
-        mode: "u=rwxs,go=rx"
-  uidmap:
-    transformations:
-    - path-metadata:
-        path: usr/bin/newgidmap
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/newuidmap
-        mode: "u=rwxs,go=rx"

debian/default/useradd

@@ -1,37 +0,0 @@
-# Default values for useradd(8)
-#
-# The SHELL variable specifies the default login shell on your
-# system.
-# Similar to DSHELL in adduser. However, we use "sh" here because
-# useradd is a low level utility and should be as general
-# as possible
-SHELL=/bin/sh
-#
-# The default group for users
-# 100=users on Debian systems
-# Same as USERS_GID in adduser
-# This argument is used when the -n flag is specified.
-# The default behavior (when -n and -g are not specified) is to create a
-# primary user group with the same name as the user being added to the
-# system.
-# GROUP=100
-#
-# The default home directory. Same as DHOME for adduser
-# HOME=/home
-#
-# The number of days after a password expires until the account 
-# is permanently disabled
-# INACTIVE=-1
-#
-# The default expire date
-# EXPIRE=
-#
-# The SKEL variable specifies the directory containing "skeletal" user
-# files; in other words, files such as a sample .profile that will be
-# copied to the new user's home directory when it is created.
-# SKEL=/etc/skel
-#
-# Defines whether the mail spool should be created while
-# creating the account
-# CREATE_MAIL_SPOOL=no
-

debian/dependencies

@@ -1,94 +0,0 @@
-Build-Depends:
-==============
- * autoconf
- * automake1.9
-   works with 1.7 or 1.9 (at least)
- * libtool
- * gettext
-   POT, PO, GMO regenerated?
- * libpam0g-dev
-   OK
- * debhelper (>= 4.1.16)
- * po-debconf
-   OK
- * quilt
-   patch system
- * dpkg-dev (>= 1.13.5)
- * xsltproc
-   used to generate the manpages
- * docbook-xsl
-   needed for /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl
- * docbook-xml
-   manpages/docbook.xsl includes html/docbook.xsl
-   (But it is not strictly needed. The generated manpages are identical.
-   Without it, a warning is generated.)
-   Needed by JH_CHECK_XML_CATALOG([-//OASIS//DTD DocBook XML V4.1.2//EN], [DocBook XML DTD V4.1.2], [], enable_man=no)
- * libxml2-utils
-   needed by the JH_CHECK_XML_CATALOG macros
- * cdbs
-   used in debian/rules
- * libselinux1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64]
- * gnome-doc-utils (>= 0.4.3-1)
-   xml2po, 0.4.3-1 needed for the -l switch.
-
-passwd Depends:
-===============
- * ${shlibs:Depends}
-   OK
- * ${loginpam}
-   - hurd
-     login
-     libpam-modules (>= 0.72-5)
-   - other archs
-     + login (>= 970502-1)
-       login is needed because some passwd utils need /etc/login.defs
-       login is Essential, so this is just to enforce the version
-     + libpam-modules (>= 0.72-5)
- * debianutils (>= 2.15.2)
-   After 1:4.0.12-6, {add,remove}-shell are distributed in debianutils (2.15)
-   /etc/shell was forgotten and introduced in debianutils in 2.15.2
-
-passwd Conflicts:
-=================
-
-passwd Replaces:
-================
-   Some of the passwd man pages are also distributed in some manpages* packages.
-   Look at the debian/02/run test to optimize these dependencies.
-   NOTE: Not all maintainers have been notified.
- * manpages-de (<< 0.4-9), manpages-fi (<< 0.2-4), manpages-fr (<<1.64.0-1), manpages-hu (<< 20010119-5), manpages-it (<< 0.3.4-3), manpages-ja (<< 0.5.0.0.20050915-1), manpages-ko (<< 20050219-2), manpages-es (<< 1.55-4), manpages-es-extra (<< 0.8a-15), manpages-ru (<< 0.98-3)
-   All those packages have been updated during sarge->etch. So these Replaces
-   should be removed after lenny release
- * manpages-tr, manpages-zh
-   Those packages are still in etch, so the Replaces should be kept even
-   after lenny release
-
-login Pre-Depends:
-==================
- * ${shlibs:Depends}
- * libpam-runtime (>= 0.76-14)
-   sarge contained 0.76-22
-
-Why Pre-Depends? (because it's an essential package?)
-
-login Depends:
-==============
- * libpam-modules (>= 0.72-5)
-   libpam-modules is needed.
-   potato contained 0.72-9
-
-login Conflicts:
-================
-
-login Replaces:
-===============
- * Some of the login man pages are also distributed in some manpages* packages.
-   Look at the debian/02/run test to optimize these dependencies.
-   NOTE: Not all maintainers have been notified.
-   - manpages-fi, manpages-fr (<<1.64.0-1), manpages-hu, manpages-it, manpages-ko, manpages-ja (<< 0.5.0.0.20050915-1), manpages-de (<< 0.4-10), manpages-es-extra (<<0.8a-15) 
-     Those are packages that have been updated during sarge->etch. These
-     Replaces should be removed after lenny
-   - manpages-tr, manpages-zh
-     Those packages are still in etch, so the Replaces should be kept even
-     after lenny release
-

debian/gitlab-ci.yml

@@ -1,7 +0,0 @@
-variables:
-  RELEASE: 'unstable'
-  # workaround for https://salsa.debian.org/salsa-ci-team/pipeline/-/issues/259
-  SALSA_CI_REPROTEST_ARGS: --vary=domain_host.use_sudo=1
-include:
- - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
- - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml

debian/libsubid-dev.install

@@ -1,3 +0,0 @@
-usr/include/*
-usr/lib/*/libsubid.a
-usr/lib/*/libsubid.so

debian/libsubid4.install

@@ -1 +0,0 @@
-usr/lib/*/libsubid.so.*

debian/libsubid4.symbols

@@ -1,10 +0,0 @@
-libsubid.so.4 libsubid4 #MINVER#
- subid_get_gid_owners@Base 1:4.11.1
- subid_get_gid_ranges@Base 1:4.11.1
- subid_get_uid_owners@Base 1:4.11.1
- subid_get_uid_ranges@Base 1:4.11.1
- subid_grant_gid_range@Base 1:4.11.1
- subid_grant_uid_range@Base 1:4.11.1
- subid_init@Base 1:4.11.1
- subid_ungrant_gid_range@Base 1:4.11.1
- subid_ungrant_uid_range@Base 1:4.11.1

debian/login.defs

@@ -1,324 +0,0 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-ERASECHAR	0177
-KILLCHAR	025
-
-# HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new
-# home directories.
-HOME_MODE	0700
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-# Extra per user uids
-SUB_UID_MIN		   100000
-SUB_UID_MAX		600100000
-SUB_UID_COUNT		    65536
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-# Extra per user group ids
-SUB_GID_MIN		   100000
-SUB_GID_MAX		600100000
-SUB_GID_COUNT		    65536
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default is no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# If set to yes, userdel will remove the user's group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-# Other former uses of this variable such as setting the umask when
-# user==primary group are not used in PAM environments, such as Debian
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to MD5, MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to BCRYPT, BCRYPT-based algorithm will be used for encrypting password
-# If set to YESCRYPT, YESCRYPT-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# MD5 and DES should not be used for new hashes, see crypt(5) for recommendations.
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD YESCRYPT
-
-#
-# The pwck(8) utility emits a warning for any system account with a home
-# directory that does not exist.  Some system accounts intentionally do
-# not have a home directory.  Such accounts may have this string as
-# their home directory in /etc/passwd to avoid a spurious warning.
-#
-NONEXISTENT	/nonexistent
-
-#
-# Allow newuidmap and newgidmap when running under an alternative
-# primary group.
-#
-#GRANT_AUX_GROUP_SUBIDS yes
-
-#
-# Select the HMAC cryptography algorithm.
-# Used in pam_timestamp module to calculate the keyed-hash message
-# authentication code.
-#
-# Note: It is recommended to check hmac(3) to see the possible algorithms
-# that are available in your system.
-#
-#HMAC_CRYPTO_ALGO SHA512
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-

debian/login.dirs

@@ -1 +0,0 @@
-usr/share/lintian/overrides

debian/login.install

@@ -1,5 +0,0 @@
-bin/login usr/bin
-debian/login.defs etc
-sbin/nologin usr/sbin
-usr/bin/newgrp
-usr/share/locale/*/LC_MESSAGES/shadow.mo

debian/login.links

@@ -1 +0,0 @@
-usr/bin/newgrp usr/bin/sg

debian/login.lintian-overrides

@@ -1 +0,0 @@
-login: elevated-privileges 4755 root/root [usr/bin/newgrp]

debian/login.maintscript

@@ -1 +0,0 @@
-rm_conffile /etc/securetty 1:4.7-1~

debian/login.manpages

@@ -1,10 +0,0 @@
-usr/share/man/*/man1/login.1
-usr/share/man/*/man1/newgrp.1
-usr/share/man/*/man1/sg.1
-usr/share/man/*/man5/login.defs.5
-usr/share/man/*/man8/nologin.8
-usr/share/man/man1/login.1
-usr/share/man/man1/newgrp.1
-usr/share/man/man1/sg.1
-usr/share/man/man5/login.defs.5
-usr/share/man/man8/nologin.8

debian/login.pam

@@ -1,96 +0,0 @@
-#
-# The PAM configuration file for the Shadow `login' service
-#
-
-# Enforce a minimal delay in case of failure (in microseconds).
-# (Replaces the `FAIL_DELAY' setting from login.defs)
-# Note that other modules may require another minimal delay. (for example,
-# to disable any delay, you should add the nodelay option to pam_unix)
-auth       optional   pam_faildelay.so  delay=3000000
-
-# Outputs an issue file prior to each login prompt (Replaces the
-# ISSUE_FILE option from login.defs). Uncomment for use
-# auth       required   pam_issue.so issue=/etc/issue
-
-# Disallows other than root logins when /etc/nologin exists
-# (Replaces the `NOLOGINS_FILE' option from login.defs)
-auth       requisite  pam_nologin.so
-
-# SELinux needs to be the first session rule. This ensures that any
-# lingering context has been cleared. Without this it is possible
-# that a module could execute code in the wrong domain.
-# When the module is present, "required" would be sufficient (When SELinux
-# is disabled, this returns success.)
-session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
-
-# Sets the loginuid process attribute
-session    required     pam_loginuid.so
-
-# Prints the message of the day upon successful login.
-# (Replaces the `MOTD_FILE' option in login.defs)
-# This includes a dynamically generated part from /run/motd.dynamic
-# and a static (admin-editable) part from /etc/motd.
-session    optional   pam_motd.so motd=/run/motd.dynamic
-session    optional   pam_motd.so noupdate
-
-# SELinux needs to intervene at login time to ensure that the process
-# starts in the proper default security context. Only sessions which are
-# intended to run in the user's context should be run after this.
-# pam_selinux.so changes the SELinux context of the used TTY and configures
-# SELinux in order to transition to the user context with the next execve()
-# call.
-session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
-# When the module is present, "required" would be sufficient (When SELinux
-# is disabled, this returns success.)
-
-# This module parses environment configuration file(s)
-# and also allows you to use an extended config
-# file /etc/security/pam_env.conf.
-# 
-# parsing /etc/environment needs "readenv=1"
-session       required   pam_env.so readenv=1
-# locale variables can also be set in /etc/default/locale
-# reading this file *in addition to /etc/environment* does not hurt
-session       required   pam_env.so readenv=1 envfile=/etc/default/locale
-
-# Standard Un*x authentication.
-@include common-auth
-
-# This allows certain extra groups to be granted to a user
-# based on things like time of day, tty, service, and user.
-# Please edit /etc/security/group.conf to fit your needs
-# (Replaces the `CONSOLE_GROUPS' option in login.defs)
-auth       optional   pam_group.so
-
-# Uncomment and edit /etc/security/time.conf if you need to set
-# time restraint on logins.
-# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
-# as well as /etc/porttime)
-# account    requisite  pam_time.so
-
-# Uncomment and edit /etc/security/access.conf if you need to
-# set access limits.
-# (Replaces /etc/login.access file)
-# account  required       pam_access.so
-
-# Sets up user limits according to /etc/security/limits.conf
-# (Replaces the use of /etc/limits in old login)
-session    required   pam_limits.so
-
-# Prints the status of the user's mailbox upon successful login
-# (Replaces the `MAIL_CHECK_ENAB' option from login.defs). 
-#
-# This also defines the MAIL environment variable
-# However, userdel also needs MAIL_DIR and MAIL_FILE variables
-# in /etc/login.defs to make sure that removing a user 
-# also removes the user's mail spool file.
-# See comments in /etc/login.defs
-session    optional   pam_mail.so standard
-
-# Create a new session keyring.
-session    optional   pam_keyinit.so force revoke
-
-# Standard Un*x account and session
-@include common-account
-@include common-session
-@include common-password

debian/not-installed

@@ -1,40 +0,0 @@
-bin/groups
-etc/login.defs
-etc/pam.d/chfn
-etc/pam.d/chage
-etc/pam.d/chpasswd
-etc/pam.d/chsh
-etc/pam.d/groupadd
-etc/pam.d/groupdel
-etc/pam.d/groupmems
-etc/pam.d/groupmod
-etc/pam.d/login
-etc/pam.d/newusers
-etc/pam.d/passwd
-etc/pam.d/useradd
-etc/pam.d/userdel
-etc/pam.d/usermod
-usr/bin/faillog
-usr/bin/sg
-usr/lib/*/libsubid.la
-usr/sbin/logoutd
-usr/sbin/vigr
-usr/share/man/*/man1/groups.1
-usr/share/man/*/man1/logoutd.1
-usr/share/man/*/man1/su.1
-usr/share/man/*/man3/getspnam.3
-usr/share/man/*/man3/shadow.3
-usr/share/man/*/man5/faillog.5
-usr/share/man/*/man5/suauth.5
-usr/share/man/*/man8/faillog.8
-usr/share/man/*/man8/logoutd.8
-usr/share/man/man1/groups.1
-usr/share/man/man1/logoutd.1
-usr/share/man/man1/su.1
-usr/share/man/man3/getspnam.3
-usr/share/man/man3/shadow.3
-usr/share/man/man5/faillog.5
-usr/share/man/man5/suauth.5
-usr/share/man/man8/faillog.8
-usr/share/man/man8/logoutd.8
-

debian/passwd.chage.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'chage' service
-#
-
-# This allows root to change password aging being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.chfn.pam

@@ -1,16 +0,0 @@
-#
-# The PAM configuration file for the Shadow `chfn' service
-#
-
-# This allows root to change user infomation without being
-# prompted for a password
-auth		sufficient	pam_rootok.so
-
-# The standard Unix authentication modules, used with
-# NIS (man nsswitch) as well as normal /etc/passwd and
-# /etc/shadow entries.
-@include common-auth
-@include common-account
-@include common-session
-
-

debian/passwd.chpasswd.pam

@@ -1,5 +0,0 @@
-# The PAM configuration file for the Shadow 'chpasswd' service
-#
-
-@include common-password
-

debian/passwd.chsh.pam

@@ -1,20 +0,0 @@
-#
-# The PAM configuration file for the Shadow `chsh' service
-#
-
-# This will not allow a user to change their shell unless
-# their current one is listed in /etc/shells. This keeps
-# accounts with special shells from changing them.
-auth       required   pam_shells.so
-
-# This allows root to change user shell without being
-# prompted for a password
-auth		sufficient	pam_rootok.so
-
-# The standard Unix authentication modules, used with
-# NIS (man nsswitch) as well as normal /etc/passwd and
-# /etc/shadow entries.
-@include common-auth
-@include common-account
-@include common-session
-

debian/passwd.dirs

@@ -1,2 +0,0 @@
-etc/default
-usr/share/lintian/overrides

debian/passwd.examples

@@ -1 +0,0 @@
-debian/passwd.expire.cron

debian/passwd.expire.cron

@@ -1,57 +0,0 @@
-#!/usr/bin/perl
-#
-# passwd.expire.cron: sample expiry notification script for use as a cronjob
-#
-# Copyright 1999 by Ben Collins <bcollins@debian.org>, complete rights granted
-# for use, distribution, modification, etc.
-#
-# Usage:
-#	edit the listed options, including the actual email, then rename to
-#	/etc/cron.daily/passwd
-#
-#	If your users don't have a valid login shell (ie. they are ftp or mail
-#	users only), they will need some other way to change their password
-#	(telnet will work since login will handle password aging, or a poppasswd
-#	program, if they are mail users).
-
-# <CONFIG> #
-
-# should be same as /etc/adduser.conf
-$LOW_UID=1000;
-$HIGH_UID=29999;
-
-# this let's the MTA handle the domain,
-# set it manually if you want. Make sure
-# you also add the @ like "\@domain.com"
-$MAIL_DOM="";
-
-# </CONFIG> #
-
-# Set the current day reference
-$curdays = int(time() / (60 * 60 * 24));
-
-# Now go through the list
-
-open(SH, "< /etc/shadow");
-while (<SH>) {
-    @shent = split(':', $_);
-    @userent = getpwnam($shent[0]);
-    if ($userent[2] >= $LOW_UID && $userent[2] <= $HIGH_UID) {
-	if ($curdays > $shent[2] + $shent[4] - $shent[5] &&
-		$shent[4] != -1 && $shent[4] != 0 &&
-		$shent[5] != -1 && $shent[5] != 0) {
-	    $daysleft = ($shent[2] + $shent[4]) - $curdays;
-	    if ($daysleft == 1) { $days = "day"; } else {$days = "days"; }
-            if ($daysleft < 0) { next; }
-	    open (MAIL, "| mail -s '[WARNING] account will expire in $daysleft $days' $shent[0]${MAIL_DOM}");
-	    print MAIL <<EOF;
-Your account will expire in $daysleft $days. Please change your password before
-then or your account will expire
-EOF
-	    close (MAIL);
-	    # This makes sure we also get a list of almost expired users
-	    print "$shent[0]'s account will expire in $daysleft days\n";
-	}
-    }
-    @userent = getpwent();
-}

debian/passwd.groupadd.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'groupadd' service
-#
-
-# This allows root to add groups without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.groupdel.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'groupdel' service
-#
-
-# This allows root to remove groups without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.groupmod.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'groupmod' service
-#
-
-# This allows root to modify groups without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.install

@@ -1,26 +0,0 @@
-debian/default/useradd etc/default
-debian/shadowconfig usr/sbin
-usr/bin/chage
-usr/bin/chfn
-usr/bin/chsh
-usr/bin/expiry
-usr/bin/gpasswd
-usr/bin/passwd
-usr/sbin/chgpasswd
-usr/sbin/chpasswd
-usr/sbin/cppw
-usr/sbin/groupadd
-usr/sbin/groupdel
-usr/sbin/groupmems
-usr/sbin/groupmod
-usr/sbin/grpck
-usr/sbin/grpconv
-usr/sbin/grpunconv
-usr/sbin/newusers
-usr/sbin/pwck
-usr/sbin/pwconv
-usr/sbin/pwunconv
-usr/sbin/useradd
-usr/sbin/userdel
-usr/sbin/usermod
-usr/sbin/vipw

debian/passwd.links

@@ -1,2 +0,0 @@
-usr/sbin/cppw usr/sbin/cpgr
-usr/sbin/vipw usr/sbin/vigr

debian/passwd.lintian-overrides

@@ -1,6 +0,0 @@
-passwd: elevated-privileges 2755 root/shadow [usr/bin/chage]
-passwd: elevated-privileges 4755 root/root [usr/bin/chfn]
-passwd: elevated-privileges 4755 root/root [usr/bin/chsh]
-passwd: elevated-privileges 2755 root/shadow [usr/bin/expiry]
-passwd: elevated-privileges 4755 root/root [usr/bin/gpasswd]
-passwd: elevated-privileges 4755 root/root [usr/bin/passwd]

debian/passwd.maintscript

@@ -1 +0,0 @@
-rm_conffile /etc/cron.daily/passwd 1:4.7-2~

debian/passwd.manpages

@@ -1,62 +0,0 @@
-debian/cpgr.8
-debian/cppw.8
-usr/share/man/*/man1/chage.1
-usr/share/man/*/man1/chfn.1
-usr/share/man/*/man1/chsh.1
-usr/share/man/*/man1/expiry.1
-usr/share/man/*/man1/gpasswd.1
-usr/share/man/*/man1/passwd.1
-usr/share/man/*/man5/gshadow.5
-usr/share/man/*/man5/passwd.5
-usr/share/man/*/man5/shadow.5
-usr/share/man/*/man5/subgid.5
-usr/share/man/*/man5/subuid.5
-usr/share/man/*/man8/chgpasswd.8
-usr/share/man/*/man8/chpasswd.8
-usr/share/man/*/man8/groupadd.8
-usr/share/man/*/man8/groupdel.8
-usr/share/man/*/man8/groupmems.8
-usr/share/man/*/man8/groupmod.8
-usr/share/man/*/man8/grpck.8
-usr/share/man/*/man8/grpconv.8
-usr/share/man/*/man8/grpunconv.8
-usr/share/man/*/man8/newusers.8
-usr/share/man/*/man8/pwck.8
-usr/share/man/*/man8/pwconv.8
-usr/share/man/*/man8/pwunconv.8
-usr/share/man/*/man8/shadowconfig.8
-usr/share/man/*/man8/useradd.8
-usr/share/man/*/man8/userdel.8
-usr/share/man/*/man8/usermod.8
-usr/share/man/*/man8/vigr.8
-usr/share/man/*/man8/vipw.8
-usr/share/man/man1/chage.1
-usr/share/man/man1/chfn.1
-usr/share/man/man1/chsh.1
-usr/share/man/man1/expiry.1
-usr/share/man/man1/gpasswd.1
-usr/share/man/man1/passwd.1
-usr/share/man/man5/gshadow.5
-usr/share/man/man5/passwd.5
-usr/share/man/man5/shadow.5
-usr/share/man/man5/subgid.5
-usr/share/man/man5/subuid.5
-usr/share/man/man8/chgpasswd.8
-usr/share/man/man8/chpasswd.8
-usr/share/man/man8/groupadd.8
-usr/share/man/man8/groupdel.8
-usr/share/man/man8/groupmems.8
-usr/share/man/man8/groupmod.8
-usr/share/man/man8/grpck.8
-usr/share/man/man8/grpconv.8
-usr/share/man/man8/grpunconv.8
-usr/share/man/man8/newusers.8
-usr/share/man/man8/pwck.8
-usr/share/man/man8/pwconv.8
-usr/share/man/man8/pwunconv.8
-usr/share/man/man8/shadowconfig.8
-usr/share/man/man8/useradd.8
-usr/share/man/man8/userdel.8
-usr/share/man/man8/usermod.8
-usr/share/man/man8/vigr.8
-usr/share/man/man8/vipw.8

debian/passwd.newusers.pam

@@ -1,5 +0,0 @@
-# The PAM configuration file for the Shadow 'newusers' service
-#
-
-@include common-password
-

debian/passwd.passwd.pam

@@ -1,6 +0,0 @@
-#
-# The PAM configuration file for the Shadow `passwd' service
-#
-
-@include common-password
-

debian/passwd.postinst

@@ -1,30 +0,0 @@
-#!/bin/sh
-
-set -e
-
-case "$1" in
-configure)
-	if ! getent group shadow | grep -q '^shadow:[^:]*:42'
-	then
-		groupadd -g 42 shadow || (
-    			cat <<EOF
-Group ID 42 has been allocated for the shadow group.  You have either
-used 42 yourself or created a shadow group with a different ID.
-Please correct this problem and reconfigure with ``dpkg --configure passwd''.
-
-Note that both user and group IDs in the range 0-99 are globally
-allocated by the Debian project and must be the same on every Debian
-system.
-EOF
-    			exit 1
-		)
-	fi
-    ;;
-esac
-
-# Run shadowconfig only on new installs
-[ -z "$2" ] && shadowconfig on
-
-#DEBHELPER#
-
-exit 0

debian/passwd.tmpfiles

@@ -1,8 +0,0 @@
-# If a password operation is in progress and we lose power, stale lockfiles
-# can be left behind.  Clear them on boot.
-r! /etc/gshadow.lock
-r! /etc/shadow.lock
-r! /etc/passwd.lock
-r! /etc/group.lock
-r! /etc/subuid.lock
-r! /etc/subgid.lock

debian/passwd.useradd.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'useradd' service
-#
-
-# This allows root to add users without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.userdel.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'userdel' service
-#
-
-# This allows root to remove users without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/passwd.usermod.pam

@@ -1,8 +0,0 @@
-# The PAM configuration file for the Shadow 'groupdel' service
-#
-
-# This allows root to remove groups without being prompted for a password
-auth		sufficient	pam_rootok.so
-
-# checks for account validity
-account	required	pam_permit.so

debian/patches/debian/Document-the-shadowconfig-utility.patch

@@ -1,280 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Document the shadowconfig utility
-
-Status wrt upstream: The shadowconfig utility is debian specific.
-Its man page also (but it used to be distributed)
----
- man/Makefile.am            |  2 ++
- man/fr/Makefile.am         |  1 +
- man/fr/man8/shadowconfig.8 | 26 +++++++++++++++++++++++
- man/ja/Makefile.am         |  1 +
- man/ja/man8/shadowconfig.8 | 25 ++++++++++++++++++++++
- man/pl/Makefile.am         |  1 +
- man/pl/man8/shadowconfig.8 | 27 ++++++++++++++++++++++++
- man/shadowconfig.8         | 41 ++++++++++++++++++++++++++++++++++++
- man/shadowconfig.8.xml     | 52 ++++++++++++++++++++++++++++++++++++++++++++++
- 9 files changed, 176 insertions(+)
- create mode 100644 man/fr/man8/shadowconfig.8
- create mode 100644 man/ja/man8/shadowconfig.8
- create mode 100644 man/pl/man8/shadowconfig.8
- create mode 100644 man/shadowconfig.8
- create mode 100644 man/shadowconfig.8.xml
-
-diff --git a/man/Makefile.am b/man/Makefile.am
-index 83b1d68..dab98f4 100644
---- a/man/Makefile.am
-+++ b/man/Makefile.am
-@@ -37,6 +37,7 @@ man_MANS = \
- 	man8/pwck.8 \
- 	man8/pwconv.8 \
- 	man8/pwunconv.8 \
-+	man8/shadowconfig.8 \
- 	man1/sg.1 \
- 	man3/shadow.3 \
- 	man5/shadow.5 \
-@@ -108,6 +109,7 @@ man_XMANS = \
- 	porttime.5.xml \
- 	pwck.8.xml \
- 	pwconv.8.xml \
-+	shadowconfig.8.xml \
- 	shadow.3.xml \
- 	shadow.5.xml \
- 	sg.1.xml \
-diff --git a/man/fr/Makefile.am b/man/fr/Makefile.am
-index 335e029..78aee9a 100644
---- a/man/fr/Makefile.am
-+++ b/man/fr/Makefile.am
-@@ -32,6 +32,7 @@ man_MANS = \
- 	man8/pwck.8 \
- 	man8/pwconv.8 \
- 	man8/pwunconv.8 \
-+	man8/shadowconfig.8 \
- 	man1/sg.1 \
- 	man3/shadow.3 \
- 	man5/shadow.5 \
-diff --git a/man/fr/man8/shadowconfig.8 b/man/fr/man8/shadowconfig.8
-new file mode 100644
-index 0000000..784da70
---- /dev/null
-+++ b/man/fr/man8/shadowconfig.8
-@@ -0,0 +1,26 @@
-+.\" This file was generated with po4a. Translate the source file.
-+.\"
-+.\"$Id: shadowconfig.8,v 1.4 2001/08/23 23:10:48 kloczek Exp $
-+.TH SHADOWCONFIG 8 "19 avril 1997" "Debian GNU/Linux"
-+.SH NOM
-+shadowconfig \- active ou désactive les mots de passe cachés
-+.SH SYNOPSIS
-+\fBshadowconfig\fP \fIon\fP | \fIoff\fP
-+.SH DESCRIPTION
-+.PP
-+\fBshadowconfig on\fP active les mots de passe cachés («\ shadow passwords\ »)\ ; \fBshadowconfig off\fP les désactive. \fBShadowconfig\fP affiche un message
-+d'erreur et quitte avec une valeur de retour non nulle s'il rencontre
-+quelque chose d'inattendu. Dans ce cas, vous devrez corriger l'erreur avant
-+de recommencer.
-+
-+Activer les mots de passe cachés lorsqu'ils sont déjà activés, ou les
-+désactiver lorsqu'ils ne sont pas actifs est sans effet.
-+
-+Lisez \fI/usr/share/doc/passwd/README.Debian\fP pour une brève introduction aux
-+mots de passe cachés et à leurs fonctionnalités.
-+
-+Notez que désactiver puis réactiver les mots de passe cachés aura pour
-+conséquence la perte des informations d'âge sur les mots de passe.
-+.SH TRADUCTION
-+Nicolas FRANÇOIS, 2004.
-+Veuillez signaler toute erreur à <\fIdebian\-l10\-french@lists.debian.org\fR>.
-diff --git a/man/ja/Makefile.am b/man/ja/Makefile.am
-index 13f18da..c72097f 100644
---- a/man/ja/Makefile.am
-+++ b/man/ja/Makefile.am
-@@ -27,6 +27,7 @@ man_MANS = \
- 	man8/pwck.8 \
- 	man8/pwconv.8 \
- 	man8/pwunconv.8 \
-+	man8/shadowconfig.8 \
- 	man1/sg.1 \
- 	man5/shadow.5 \
- 	man1/su.1 \
-diff --git a/man/ja/man8/shadowconfig.8 b/man/ja/man8/shadowconfig.8
-new file mode 100644
-index 0000000..a75c6f7
---- /dev/null
-+++ b/man/ja/man8/shadowconfig.8
-@@ -0,0 +1,25 @@
-+.\"     all right reserved,
-+.\" Translated Tue Oct 30 11:59:11 JST 2001
-+.\" by Maki KURODA <mkuroda@aisys-jp.com>
-+.\"
-+.TH SHADOWCONFIG 8 "19 Apr 1997" "Debian GNU/Linux"
-+.SH 名前
-+shadowconfig \- shadow パスワードの設定をオン及びオフに切替える
-+.SH 書式
-+.B "shadowconfig"
-+.IR on " | " off
-+.SH 説明
-+.PP
-+.B shadowconfig on
-+は shadow パスワードを有効にする。
-+.B shadowconfig off
-+は shadow パスワードを無効にする。
-+.B shadowconfig
-+は何らかの間違いがあると、エラーメッセージを表示し、
-+ゼロではない返り値を返す。
-+もしそのようなことが起こった場合、エラーを修正し、再度実行しなければならない。
-+shadow パスワードの設定がすでにオンの場合にオンに設定したり、
-+すでにオフの場合にオフに設定しても、何の影響もない。
-+
-+.I /usr/share/doc/passwd/README.debian.gz
-+には shadow パスワードとそれに関する特徴の簡単な紹介が書かれている。
-diff --git a/man/pl/Makefile.am b/man/pl/Makefile.am
-index b2f096f..aa79af2 100644
---- a/man/pl/Makefile.am
-+++ b/man/pl/Makefile.am
-@@ -18,6 +18,7 @@ man_MANS = \
- 	man8/logoutd.8 \
- 	man1/newgrp.1 \
- 	man1/sg.1 \
-+	man8/shadowconfig.8 \
- 	man3/shadow.3 \
- 	man8/userdel.8 \
- 	man8/usermod.8 \
-diff --git a/man/pl/man8/shadowconfig.8 b/man/pl/man8/shadowconfig.8
-new file mode 100644
-index 0000000..2016c9f
---- /dev/null
-+++ b/man/pl/man8/shadowconfig.8
-@@ -0,0 +1,27 @@
-+.\" $Id: shadowconfig.8,v 1.3 2001/08/23 23:10:51 kloczek Exp $
-+.\" {PTM/WK/1999-09-14}
-+.TH SHADOWCONFIG 8 "19 kwietnia 1997" "Debian GNU/Linux"
-+.SH NAZWA
-+shadowconfig - przełącza ochronę haseł i grup przez pliki shadow
-+.SH SKŁADNIA
-+.B "shadowconfig"
-+.IR on " | " off
-+.SH OPIS
-+.PP
-+.B shadowconfig on
-+włącza ochronę haseł i grup przez dodatkowe, przesłaniane pliki (shadow);
-+.B shadowconfig off
-+wyłącza dodatkowe pliki haseł i grup.
-+.B shadowconfig
-+wyświetla komunikat o błędzie i kończy pracę z niezerowym kodem jeśli
-+znajdzie coś nieprawidłowego. W takim wypadku powinieneś poprawić błąd
-+.\" if it finds anything awry.
-+i uruchomić program ponownie.
-+
-+Włączenie ochrony haseł, gdy jest ona już włączona lub jej wyłączenie,
-+gdy jest wyłączona jest nieszkodliwe.
-+
-+Przeczytaj
-+.IR /usr/share/doc/passwd/README.debian.gz ,
-+gdzie znajdziesz krótkie wprowadzenie do ochrony haseł z użyciem dodatkowych
-+plików haseł przesłanianych (shadow passwords) i związanych tematów.
-diff --git a/man/shadowconfig.8 b/man/shadowconfig.8
-new file mode 100644
-index 0000000..c0ee0af
---- /dev/null
-+++ b/man/shadowconfig.8
-@@ -0,0 +1,41 @@
-+.\"Generated by db2man.xsl. Don't modify this, modify the source.
-+.de Sh \" Subsection
-+.br
-+.if t .Sp
-+.ne 5
-+.PP
-+\fB\\$1\fR
-+.PP
-+..
-+.de Sp \" Vertical space (when we can't use .PP)
-+.if t .sp .5v
-+.if n .sp
-+..
-+.de Ip \" List item
-+.br
-+.ie \\n(.$>=3 .ne \\$3
-+.el .ne 3
-+.IP "\\$1" \\$2
-+..
-+.TH "SHADOWCONFIG" 8 "19 Apr 1997" "" ""
-+.SH NAME
-+shadowconfig \- toggle shadow passwords on and off
-+.SH "SYNOPSIS"
-+.ad l
-+.hy 0
-+.HP 13
-+\fBshadowconfig\fR \fB\fIon\fR\fR | \fB\fIoff\fR\fR
-+.ad
-+.hy
-+
-+.SH "DESCRIPTION"
-+
-+.PP
-+\fBshadowconfig\fR on will turn shadow passwords on; \fIshadowconfig off\fR will turn shadow passwords off\&. \fBshadowconfig\fR will print an error message and exit with a nonzero code if it finds anything awry\&. If that happens, you should correct the error and run it again\&. Turning shadow passwords on when they are already on, or off when they are already off, is harmless\&.
-+
-+.PP
-+Read \fI/usr/share/doc/passwd/README\&.Debian\fR for a brief introduction to shadow passwords and related features\&.
-+
-+.PP
-+Note that turning shadow passwords off and on again will lose all password aging information\&.
-+
-diff --git a/man/shadowconfig.8.xml b/man/shadowconfig.8.xml
-new file mode 100644
-index 0000000..b4080ea
---- /dev/null
-+++ b/man/shadowconfig.8.xml
-@@ -0,0 +1,52 @@
-+<?xml version="1.0" encoding="UTF-8"?>
-+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
-+		"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
-+<refentry id='shadowconfig.8'>
-+  <!-- $Id: shadowconfig.8.xml,v 1.6 2005/06/15 12:39:27 kloczek Exp $ -->
-+  <refentryinfo>
-+    <date>19 Apr 1997</date>
-+  </refentryinfo>
-+  <refmeta>
-+    <refentrytitle>shadowconfig</refentrytitle>
-+    <manvolnum>8</manvolnum>
-+    <refmiscinfo class='date'>19 Apr 1997</refmiscinfo>
-+    <refmiscinfo class='source'>Debian GNU/Linux</refmiscinfo>
-+  </refmeta>
-+  <refnamediv id='name'>
-+    <refname>shadowconfig</refname>
-+    <refpurpose>toggle shadow passwords on and off</refpurpose>
-+  </refnamediv>
-+
-+  <refsynopsisdiv id='synopsis'>
-+    <cmdsynopsis>
-+      <command>shadowconfig</command>
-+      <group choice='plain'>
-+        <arg choice='plain'><replaceable>on</replaceable></arg>
-+        <arg choice='plain'><replaceable>off</replaceable></arg>
-+      </group>
-+    </cmdsynopsis>
-+  </refsynopsisdiv>
-+
-+  <refsect1 id='description'>
-+    <title>DESCRIPTION</title>
-+    <para><command>shadowconfig</command> on will turn shadow passwords on;
-+      <emphasis remap='B'>shadowconfig off</emphasis> will turn shadow
-+      passwords off. <command>shadowconfig</command> will print an error
-+      message and exit with a nonzero code if it finds anything awry. If
-+      that happens, you should correct the error and run it again. Turning
-+      shadow passwords on when they are already on, or off when they are
-+      already off, is harmless.
-+    </para>
-+
-+    <para>
-+      Read <filename>/usr/share/doc/passwd/README.Debian</filename> for a
-+      brief introduction
-+      to shadow passwords and related features.
-+    </para>
-+
-+    <para>Note that turning shadow passwords off and on again will lose all
-+      password
-+      aging information.
-+    </para>
-+  </refsect1>
-+</refentry>

debian/patches/debian/Keep-using-Debian-adduser-defaults.patch

@@ -1,52 +0,0 @@
-From: Balint Reczey <balint@balintreczey.hu>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Keep using Debian's adduser defaults
-
-Bug: https://github.com/shadow-maint/shadow/issues/501
-Bug-Debian: https://bugs.debian.org/1004710
-Forwarded: not-needed
-
-Upstream's bbf4b79bc49fd1826eb41f6629669ef0b647267b commit
-in 4.9 merged those values from upstream's default configuration file
-which is not shipped in Debian.
-This patch keeps the program's compiled in defaults in sync with the
-configuration files shipped in Debian (debian/default/useradd).
----
- man/useradd.8.xml | 2 +-
- src/useradd.c     | 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/man/useradd.8.xml b/man/useradd.8.xml
-index 001e7d1..4888100 100644
---- a/man/useradd.8.xml
-+++ b/man/useradd.8.xml
-@@ -248,7 +248,7 @@
- 	    command line), useradd will set the primary group of the new
- 	    user to the value specified by the <option>GROUP</option>
- 	    variable in <filename>/etc/default/useradd</filename>, or
--	    1000 by default.
-+	    100 by default.
- 	  </para>
- 	</listitem>
-       </varlistentry>
-diff --git a/src/useradd.c b/src/useradd.c
-index 347334a..ac43edd 100644
---- a/src/useradd.c
-+++ b/src/useradd.c
-@@ -91,14 +91,14 @@ static const char Prog[] = "useradd";
- /*
-  * These defaults are used if there is no defaults file.
-  */
--static gid_t def_group = 1000;
-+static gid_t def_group = 100;
- static const char *def_groups = "";
- static const char *def_gname = "other";
- static const char *def_home = "/home";
- static const char *def_shell = "/bin/bash";
- static const char *def_template = SKEL_DIR;
- static const char *def_usrtemplate = USRSKELDIR;
--static const char *def_create_mail_spool = "yes";
-+static const char *def_create_mail_spool = "no";
- static const char *def_log_init = "yes";
- 
- static long def_inactive = -1;

debian/patches/debian/Let-pam_unix-handle-login-failure-delays.patch

@@ -1,106 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Let pam_unix handle login failure delays
-
-Fixes: #87648
-
-Status wrt upstream: Forwarded but not applied yet
-
-Note: If removed, FAIL_DELAY must be re-added to /etc/login.defs
----
- lib/getdef.c |  1 -
- src/login.c  | 19 +++++--------------
- 2 files changed, 5 insertions(+), 15 deletions(-)
-
-diff --git a/lib/getdef.c b/lib/getdef.c
-index 30f54ba..21307bb 100644
---- a/lib/getdef.c
-+++ b/lib/getdef.c
-@@ -84,7 +84,6 @@ static struct itemdef def_table[] = {
- 	{"ENV_PATH", NULL},
- 	{"ENV_SUPATH", NULL},
- 	{"ERASECHAR", NULL},
--	{"FAIL_DELAY", NULL},
- 	{"FAKE_SHELL", NULL},
- 	{"GID_MAX", NULL},
- 	{"GID_MIN", NULL},
-diff --git a/src/login.c b/src/login.c
-index 9fed7b3..a5512d1 100644
---- a/src/login.c
-+++ b/src/login.c
-@@ -490,7 +490,6 @@ int main (int argc, char **argv)
- 	const char     *tmptty;
- 	const char     *cp;
- 	const char     *tmp;
--	unsigned int   delay;
- 	unsigned int   retries;
- 	unsigned int   timeout;
- 	struct passwd  *pwd = NULL;
-@@ -500,6 +499,7 @@ int main (int argc, char **argv)
- 	char           *pam_user = NULL;
- 	pid_t          child;
- #else
-+	unsigned int   delay;
- 	bool is_console;
- 	struct spwd *spwd = NULL;
- # if defined(ENABLE_LASTLOG)
-@@ -669,7 +669,6 @@ int main (int argc, char **argv)
- 	}
- 
- 	environ = newenvp;	/* make new environment active */
--	delay   = getdef_unum ("FAIL_DELAY", 1);
- 	retries = getdef_unum ("LOGIN_RETRIES", RETRIES);
- 
- #ifdef USE_PAM
-@@ -685,8 +684,7 @@ int main (int argc, char **argv)
- 
- 	/*
- 	 * hostname & tty are either set to NULL or their correct values,
--	 * depending on how much we know. We also set PAM's fail delay to
--	 * ours.
-+	 * depending on how much we know.
- 	 *
- 	 * PAM_RHOST and PAM_TTY are used for authentication, only use
- 	 * information coming from login or from the caller (e.g. no utmp)
-@@ -695,10 +693,6 @@ int main (int argc, char **argv)
- 	PAM_FAIL_CHECK;
- 	retcode = pam_set_item (pamh, PAM_TTY, tty);
- 	PAM_FAIL_CHECK;
--#ifdef HAS_PAM_FAIL_DELAY
--	retcode = pam_fail_delay (pamh, 1000000 * delay);
--	PAM_FAIL_CHECK;
--#endif
- 	/* if fflg, then the user has already been authenticated */
- 	if (!fflg) {
- 		char          hostn[256];
-@@ -736,12 +730,6 @@ int main (int argc, char **argv)
- 			bool failed = false;
- 
- 			failcount++;
--#ifdef HAS_PAM_FAIL_DELAY
--			if (delay > 0) {
--				retcode = pam_fail_delay(pamh, 1000000*delay);
--				PAM_FAIL_CHECK;
--			}
--#endif
- 
- 			retcode = pam_authenticate (pamh, 0);
- 
-@@ -1032,14 +1020,17 @@ int main (int argc, char **argv)
- 		free (username);
- 		username = NULL;
- 
-+#ifndef USE_PAM
- 		/*
- 		 * Wait a while (a la SVR4 /usr/bin/login) before attempting
- 		 * to login the user again. If the earlier alarm occurs
- 		 * before the sleep() below completes, login will exit.
- 		 */
-+		delay = getdef_unum ("FAIL_DELAY", 1);
- 		if (delay > 0) {
- 			(void) sleep (delay);
- 		}
-+#endif
- 
- 		(void) puts (_("Login incorrect"));
- 

debian/patches/debian/Recommend-using-adduser-and-deluser.patch

@@ -1,46 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Recommend using adduser and deluser
-
-Fixes: #406046
-
-Status wrt upstream: Debian specific patch.
----
- man/useradd.8.xml | 6 ++++++
- man/userdel.8.xml | 6 ++++++
- 2 files changed, 12 insertions(+)
-
-diff --git a/man/useradd.8.xml b/man/useradd.8.xml
-index 4888100..17987a6 100644
---- a/man/useradd.8.xml
-+++ b/man/useradd.8.xml
-@@ -82,6 +82,12 @@
- 
-   <refsect1 id='description'>
-     <title>DESCRIPTION</title>
-+      <para>
-+	<command>useradd</command> is a low level utility for adding
-+	users.  On Debian, administrators should usually use
-+	<citerefentry><refentrytitle>adduser</refentrytitle>
-+	<manvolnum>8</manvolnum></citerefentry> instead.
-+      </para>
-       <para>
- 	When invoked without the <option>-D</option> option, the
- 	<command>useradd</command> command creates a new user account using
-diff --git a/man/userdel.8.xml b/man/userdel.8.xml
-index 5bd2981..384cc86 100644
---- a/man/userdel.8.xml
-+++ b/man/userdel.8.xml
-@@ -58,6 +58,12 @@
- 
-   <refsect1 id='description'>
-     <title>DESCRIPTION</title>
-+    <para>
-+      <command>userdel</command> is a low level utility for removing
-+      users.  On Debian, administrators should usually use
-+      <citerefentry><refentrytitle>deluser</refentrytitle>
-+      <manvolnum>8</manvolnum></citerefentry> instead.
-+    </para>
-     <para>
-       The <command>userdel</command> command modifies the system account
-       files, deleting all entries that refer to the user name <emphasis

debian/patches/debian/Relax-usernames-groupnames-checking.patch

@@ -1,123 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Relax usernames/groupnames checking
-
-Allows any non-empty user/grounames that don't contain ':', ',' or '\n'
-characters and don't start with '-', '+', or '~'. This patch is more
-restrictive than original Karl's version. closes: #264879
-Also closes: #377844
-
-Comments from Karl Ramm (shadow 1:4.0.3-9, 20 Aug 2003 02:06:50 -0400):
-
-I can't come up with a good justification as to why characters other
-than ':'s and '\0's should be disallowed in group and usernames (other
-than '-' as the leading character).  Thus, the maintenance tools don't
-anymore.  closes: #79682, #166798, #171179
-
-Status wrt upstream: Debian specific. Not to be used upstream
----
- lib/chkname.c      | 47 +++++++++++++++--------------------------------
- man/groupadd.8.xml |  6 ++++++
- man/useradd.8.xml  |  8 ++++++++
- 3 files changed, 29 insertions(+), 32 deletions(-)
-
-diff --git a/lib/chkname.c b/lib/chkname.c
-index 995562f..d9678c6 100644
---- a/lib/chkname.c
-+++ b/lib/chkname.c
-@@ -54,44 +54,27 @@ static bool is_valid_name (const char *name)
- 	}
- 
- 	/*
--         * User/group names must match BRE regex:
--         *    [a-zA-Z0-9_.][a-zA-Z0-9_.-]*$\?
--         *
--         * as a non-POSIX, extension, allow "$" as the last char for
--         * sake of Samba 3.x "add machine script"
--         *
--         * Also do not allow fully numeric names or just "." or "..".
--         */
--	int numeric;
--
--	if ('\0' == *name ||
--	    ('.' == *name && (('.' == name[1] && '\0' == name[2]) ||
--			      '\0' == name[1])) ||
--	    !((*name >= 'a' && *name <= 'z') ||
--	      (*name >= 'A' && *name <= 'Z') ||
--	      (*name >= '0' && *name <= '9') ||
--	      *name == '_' ||
--	      *name == '.')) {
-+	 * POSIX indicate that usernames are composed of characters from the
-+	 * portable filename character set [A-Za-z0-9._-], and that the hyphen
-+	 * should not be used as the first character of a portable user name.
-+	 *
-+	 * Allow more relaxed user/group names in Debian -- ^[^-~+:,\s][^:,\s]*$
-+	 */
-+	if (   ('\0' == *name)
-+	    || ('-'  == *name)
-+	    || ('~'  == *name)
-+	    || ('+'  == *name)) {
- 		return false;
- 	}
- 
--	numeric = isdigit(*name);
--
--	while ('\0' != *++name) {
--		if (!((*name >= 'a' && *name <= 'z') ||
--		      (*name >= 'A' && *name <= 'Z') ||
--		      (*name >= '0' && *name <= '9') ||
--		      *name == '_' ||
--		      *name == '.' ||
--		      *name == '-' ||
--		      (*name == '$' && name[1] == '\0')
--		     )) {
-+	do {
-+		if ((':' == *name) || (',' == *name) || isspace(*name)) {
- 			return false;
- 		}
--		numeric &= isdigit(*name);
--	}
-+		name++;
-+	} while ('\0' != *name);
- 
--	return !numeric;
-+	return true;
- }
- 
- 
-diff --git a/man/groupadd.8.xml b/man/groupadd.8.xml
-index 61a548f..d472bd0 100644
---- a/man/groupadd.8.xml
-+++ b/man/groupadd.8.xml
-@@ -71,6 +71,12 @@
-        Fully numeric groupnames and groupnames . or .. are
-        also disallowed.
-      </para>
-+     <para>
-+       On Debian, the only constraints are that groupnames must neither start
-+       with a dash ('-') nor plus ('+') nor tilde ('~') nor contain a
-+       colon (':'), a comma (','), or a whitespace (space:' ',
-+       end of line: '\n', tabulation: '\t', etc.).
-+     </para>
-      <para>
-        Groupnames may only be up to &GROUP_NAME_MAX_LENGTH; characters long.
-      </para>
-diff --git a/man/useradd.8.xml b/man/useradd.8.xml
-index 17987a6..c98b214 100644
---- a/man/useradd.8.xml
-+++ b/man/useradd.8.xml
-@@ -735,6 +735,14 @@
-     <para>
-       Usernames may only be up to 256 characters long.
-     </para>
-+    <para>
-+      On Debian, the only constraints are that usernames must neither start
-+      with a dash ('-') nor plus ('+') nor tilde ('~') nor contain a
-+      colon (':'), a comma (','), or a whitespace (space: ' ',
-+      end of line: '\n', tabulation: '\t', etc.). Note that using a slash
-+      ('/') may break the default algorithm for the definition of the
-+      user's home directory.
-+    </para>
-   </refsect1>
- 
-   <refsect1 id='configuration'>

debian/patches/debian/Set-group-and-mode-for-g-shadow-files.patch

@@ -1,75 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Set group and mode for [g]shadow files
-
-Set group 'shadow' and mode 0400.
-
-Fixes: #166793
----
- lib/commonio.c | 12 ++++++++++++
- lib/sgroupio.c |  2 +-
- lib/shadowio.c |  2 +-
- 3 files changed, 14 insertions(+), 2 deletions(-)
-
-diff --git a/lib/commonio.c b/lib/commonio.c
-index 01a26c9..72e53b0 100644
---- a/lib/commonio.c
-+++ b/lib/commonio.c
-@@ -21,6 +21,7 @@
- #include <errno.h>
- #include <stdio.h>
- #include <signal.h>
-+#include <grp.h>
- 
- #include "alloc.h"
- #include "memzero.h"
-@@ -956,12 +957,23 @@ int commonio_close (struct commonio_db *db)
- 		if (errors != 0)
- 			goto fail;
- 	} else {
-+		struct group *grp;
- 		/*
- 		 * Default permissions for new [g]shadow files.
- 		 */
- 		sb.st_mode = db->st_mode;
- 		sb.st_uid = db->st_uid;
- 		sb.st_gid = db->st_gid;
-+
-+		/*
-+		 * Try to retrieve the shadow's GID, and fall back to GID 0.
-+		 */
-+		if (sb.st_gid == 0) {
-+			if ((grp = getgrnam("shadow")) != NULL)
-+				sb.st_gid = grp->gr_gid;
-+			else
-+				sb.st_gid = 0;
-+		}
- 	}
- 
- 	if (SNPRINTF(buf, "%s+", db->filename) == -1)
-diff --git a/lib/sgroupio.c b/lib/sgroupio.c
-index 0297df4..107b1e5 100644
---- a/lib/sgroupio.c
-+++ b/lib/sgroupio.c
-@@ -209,7 +209,7 @@ static struct commonio_db gshadow_db = {
- #ifdef WITH_SELINUX
- 	NULL,			/* scontext */
- #endif
--	0400,                   /* st_mode */
-+	0440,                   /* st_mode */
- 	0,                      /* st_uid */
- 	0,                      /* st_gid */
- 	NULL,			/* head */
-diff --git a/lib/shadowio.c b/lib/shadowio.c
-index d2c3b47..53dac0b 100644
---- a/lib/shadowio.c
-+++ b/lib/shadowio.c
-@@ -85,7 +85,7 @@ static struct commonio_db shadow_db = {
- #ifdef WITH_SELINUX
- 	NULL,			/* scontext */
- #endif				/* WITH_SELINUX */
--	0400,                   /* st_mode */
-+	0440,                   /* st_mode */
- 	0,                      /* st_uid */
- 	0,                      /* st_gid */
- 	NULL,			/* head */

debian/patches/debian/cppw-Add-tool.patch

@@ -1,287 +0,0 @@
-From: Nicolas FRANCOIS <nicolas.francois@centraliens.net>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: cppw: Add tool
-
----
- po/POTFILES.in  |   1 +
- src/Makefile.am |   2 +
- src/cppw.c      | 238 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 241 insertions(+)
- create mode 100644 src/cppw.c
-
-diff --git a/po/POTFILES.in b/po/POTFILES.in
-index 9ff6100..a60c93e 100644
---- a/po/POTFILES.in
-+++ b/po/POTFILES.in
-@@ -86,6 +86,7 @@ src/chfn.c
- src/chgpasswd.c
- src/chpasswd.c
- src/chsh.c
-+src/cppw.c
- src/expiry.c
- src/faillog.c
- src/gpasswd.c
-diff --git a/src/Makefile.am b/src/Makefile.am
-index b6cb09e..c86ba52 100644
---- a/src/Makefile.am
-+++ b/src/Makefile.am
-@@ -39,6 +39,7 @@ if WITH_SU
- bin_PROGRAMS  += su
- endif
- usbin_PROGRAMS = \
-+	cppw \
- 	chgpasswd \
- 	chpasswd \
- 	groupadd \
-@@ -104,6 +105,7 @@ newuidmap_LDADD    = $(LDADD) $(LIBAUDIT) $(LIBSELINUX) $(LIBCAP) $(LIBECONF) -l
- newgidmap_LDADD    = $(LDADD) $(LIBAUDIT) $(LIBSELINUX) $(LIBCAP) $(LIBECONF) -ldl
- chfn_LDADD     = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT_NOPAM) $(LIBSKEY) $(LIBMD) $(LIBECONF)
- chgpasswd_LDADD = $(LDADD) $(LIBPAM_SUID) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT) $(LIBECONF)
-+cppw_LDADD     = $(LDADD) $(LIBAUDIT) $(LIBSELINUX)
- chsh_LDADD     = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT_NOPAM) $(LIBSKEY) $(LIBMD) $(LIBECONF)
- chpasswd_LDADD = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT) $(LIBECONF) -ldl
- expiry_LDADD = $(LDADD) $(LIBECONF)
-diff --git a/src/cppw.c b/src/cppw.c
-new file mode 100644
-index 0000000..beb4c36
---- /dev/null
-+++ b/src/cppw.c
-@@ -0,0 +1,238 @@
-+/*
-+  cppw, cpgr  copy with locking given file over the password or group file
-+  with -s will copy with locking given file over shadow or gshadow file
-+
-+  Copyright (C) 1999 Stephen Frost <sfrost@snowman.net>
-+
-+  Based on vipw, vigr by:
-+  Copyright (C) 1997 Guy Maor <maor@ece.utexas.edu>
-+
-+  This program is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+
-+  This program is distributed in the hope that it will be useful, but
-+  WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+  General Public License for more details.
-+
-+  You should have received a copy of the GNU General Public License
-+  along with this program; if not, write to the Free Software
-+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+
-+  */
-+
-+#include <config.h>
-+#include "defines.h"
-+
-+#include <errno.h>
-+#include <sys/stat.h>
-+#include <unistd.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <sys/types.h>
-+#include <signal.h>
-+#include <utime.h>
-+#include "exitcodes.h"
-+#include "prototypes.h"
-+#include "pwio.h"
-+#include "shadowio.h"
-+#include "groupio.h"
-+#include "sgroupio.h"
-+
-+
-+const char *Prog;
-+
-+const char *filename, *filenewname;
-+static bool filelocked = false;
-+static int (*unlock) (void);
-+
-+/* local function prototypes */
-+static int create_copy (FILE *fp, const char *dest, struct stat *sb);
-+static void cppwexit (const char *msg, int syserr, int ret);
-+static void cppwcopy (const char *file,
-+                      const char *in_file,
-+                      int (*file_lock) (void),
-+                      int (*file_unlock) (void));
-+
-+static int create_copy (FILE *fp, const char *dest, struct stat *sb)
-+{
-+	struct utimbuf ub;
-+	FILE *bkfp;
-+	int c;
-+	mode_t mask;
-+
-+	mask = umask (077);
-+	bkfp = fopen (dest, "w");
-+	(void) umask (mask);
-+	if (NULL == bkfp) {
-+		return -1;
-+	}
-+
-+	rewind (fp);
-+	while ((c = getc (fp)) != EOF) {
-+		if (putc (c, bkfp) == EOF) {
-+			break;
-+		}
-+	}
-+
-+	if (   (c != EOF)
-+	    || (fflush (bkfp) != 0)) {
-+		(void) fclose (bkfp);
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+	if (   (fsync (fileno (bkfp)) != 0)
-+	    || (fclose (bkfp) != 0)) {
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+
-+	ub.actime = sb->st_atime;
-+	ub.modtime = sb->st_mtime;
-+	if (   (utime (dest, &ub) != 0)
-+	    || (chmod (dest, sb->st_mode) != 0)
-+	    || (chown (dest, sb->st_uid, sb->st_gid) != 0)) {
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static void cppwexit (const char *msg, int syserr, int ret)
-+{
-+	int err = errno;
-+	if (filelocked) {
-+		(*unlock) ();
-+	}
-+	if (NULL != msg) {
-+		fprintf (stderr, "%s: %s", Prog, msg);
-+		if (0 != syserr) {
-+			fprintf (stderr, ": %s", strerror (err));
-+		}
-+		(void) fputs ("\n", stderr);
-+	}
-+	if (NULL != filename) {
-+		fprintf (stderr, _("%s: %s is unchanged\n"), Prog, filename);
-+	} else {
-+		fprintf (stderr, _("%s: no changes\n"), Prog);
-+	}
-+
-+	exit (ret);
-+}
-+
-+static void cppwcopy (const char *file,
-+                      const char *in_file,
-+                      int (*file_lock) (void),
-+                      int (*file_unlock) (void))
-+{
-+	struct stat st1;
-+	FILE *f;
-+	char filenew[1024];
-+
-+	snprintf (filenew, sizeof filenew, "%s.new", file);
-+	unlock = file_unlock;
-+	filename = file;
-+	filenewname = filenew;
-+
-+	if (access (file, F_OK) != 0) {
-+		cppwexit (file, 1, 1);
-+	}
-+	if (file_lock () == 0) {
-+		cppwexit (_("Couldn't lock file"), 0, 5);
-+	}
-+	filelocked = true;
-+
-+	/* file to copy has same owners, perm */
-+	if (stat (file, &st1) != 0) {
-+		cppwexit (file, 1, 1);
-+	}
-+	f = fopen (in_file, "r");
-+	if (NULL == f) {
-+		cppwexit (in_file, 1, 1);
-+	}
-+	if (create_copy (f, filenew, &st1) != 0) {
-+		cppwexit (_("Couldn't make copy"), errno, 1);
-+	}
-+
-+	/* XXX - here we should check filenew for errors; if there are any,
-+	 * fail w/ an appropriate error code and let the user manually fix
-+	 * it. Use pwck or grpck to do the check.  - Stephen (Shamelessly
-+	 * stolen from '--marekm's comment) */
-+
-+	if (rename (filenew, file) != 0) {
-+		fprintf (stderr, _("%s: can't copy %s: %s)\n"),
-+                         Prog, filenew, strerror (errno));
-+		cppwexit (NULL,0,1);
-+	}
-+
-+	(*file_unlock) ();
-+}
-+
-+int main (int argc, char **argv)
-+{
-+	int flag;
-+	bool cpshadow = false;
-+	char *in_file;
-+	int e = E_USAGE;
-+	bool do_cppw = true;
-+
-+	(void) setlocale (LC_ALL, "");
-+	(void) bindtextdomain (PACKAGE, LOCALEDIR);
-+	(void) textdomain (PACKAGE);
-+
-+	Prog = Basename (argv[0]);
-+	if (strcmp (Prog, "cpgr") == 0) {
-+		do_cppw = false;
-+	}
-+
-+	while ((flag = getopt (argc, argv, "ghps")) != EOF) {
-+		switch (flag) {
-+		case 'p':
-+			do_cppw = true;
-+			break;
-+		case 'g':
-+			do_cppw = false;
-+			break;
-+		case 's':
-+			cpshadow = true;
-+			break;
-+		case 'h':
-+			e = E_SUCCESS;
-+			/*pass through*/
-+		default:
-+			(void) fputs (_("Usage:\n\
-+`cppw <file>' copys over /etc/passwd   `cppw -s <file>' copys over /etc/shadow\n\
-+`cpgr <file>' copys over /etc/group    `cpgr -s <file>' copys over /etc/gshadow\n\
-+"), (E_SUCCESS != e) ? stderr : stdout);
-+			exit (e);
-+		}
-+	}
-+
-+	if (argc != optind + 1) {
-+		cppwexit (_("wrong number of arguments, -h for usage"),0,1);
-+	}
-+
-+	in_file = argv[optind];
-+
-+	if (do_cppw) {
-+		if (cpshadow) {
-+			cppwcopy (SHADOW_FILE, in_file, spw_lock, spw_unlock);
-+		} else {
-+			cppwcopy (PASSWD_FILE, in_file, pw_lock, pw_unlock);
-+		}
-+	} else {
-+#ifdef SHADOWGRP
-+		if (cpshadow) {
-+			cppwcopy (SGROUP_FILE, in_file, sgr_lock, sgr_unlock);
-+		} else
-+#endif				/* SHADOWGRP */
-+		{
-+			cppwcopy (GROUP_FILE, in_file, gr_lock, gr_unlock);
-+		}
-+	}
-+
-+	return 0;
-+}
-+

debian/patches/debian/cppw-add-selinux-support.patch

@@ -1,63 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: cppw: add selinux support
-
-Status wrt upstream: cppw is not available upstream.
-Needs to be reviewed by an SE-Linux aware person.
----
- src/cppw.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/src/cppw.c b/src/cppw.c
-index beb4c36..2cbbbc0 100644
---- a/src/cppw.c
-+++ b/src/cppw.c
-@@ -34,6 +34,9 @@
- #include <sys/types.h>
- #include <signal.h>
- #include <utime.h>
-+#ifdef WITH_SELINUX
-+#include <selinux/selinux.h>
-+#endif				/* WITH_SELINUX */
- #include "exitcodes.h"
- #include "prototypes.h"
- #include "pwio.h"
-@@ -139,6 +142,22 @@ static void cppwcopy (const char *file,
- 	if (access (file, F_OK) != 0) {
- 		cppwexit (file, 1, 1);
- 	}
-+#ifdef WITH_SELINUX
-+	/* if SE Linux is enabled then set the context of all new files
-+	 * to be the context of the file we are editing */
-+	if (is_selinux_enabled () > 0) {
-+		security_context_t passwd_context=NULL;
-+		int ret = 0;
-+		if (getfilecon (file, &passwd_context) < 0) {
-+			cppwexit (_("Couldn't get file context"), errno, 1);
-+		}
-+		ret = setfscreatecon (passwd_context);
-+		freecon (passwd_context);
-+		if (0 != ret) {
-+			cppwexit (_("setfscreatecon () failed"), errno, 1);
-+		}
-+	}
-+#endif				/* WITH_SELINUX */
- 	if (file_lock () == 0) {
- 		cppwexit (_("Couldn't lock file"), 0, 5);
- 	}
-@@ -167,6 +186,15 @@ static void cppwcopy (const char *file,
- 		cppwexit (NULL,0,1);
- 	}
- 
-+#ifdef WITH_SELINUX
-+	/* unset the fscreatecon */
-+	if (is_selinux_enabled () > 0) {
-+		if (setfscreatecon (NULL)) {
-+		cppwexit (_("setfscreatecon() failed"), errno, 1);
-+		}
-+	}
-+#endif				/* WITH_SELINUX */
-+
- 	(*file_unlock) ();
- }
- 

debian/patches/debian/tests-disable-su.patch

@@ -1,89 +0,0 @@
-From: Serge Hallyn <serge@hallyn.com>
-Date: Thu, 27 Jun 2024 01:23:05 +0200
-Subject: upstream testsuite: disable su tests
-
-Debian uses su from util-linux, pointless/impossible to test shadow's su
-here.
----
- tests/run_some | 68 ----------------------------------------------------------
- 1 file changed, 68 deletions(-)
-
-diff --git a/tests/run_some b/tests/run_some
-index c58f59b..46317eb 100755
---- a/tests/run_some
-+++ b/tests/run_some
-@@ -79,74 +79,6 @@ echo "-: test failed"
- find "${build_path}" -name "*.gcda" -delete
- # ignore the result of the first test.  ~magic~
- run_test ./su/01/su_user.test ignore_failure
--run_test ./su/01/su_user.test
--run_test ./su/01/su_root.test
--find "${build_path}" -name "*.gcda" -exec chmod a+rw {} \;
--run_test ./su/02/env_FOO-options_--login
--run_test ./su/02/env_FOO-options_--login_bash
--run_test ./su/02/env_FOO-options_--preserve-environment
--run_test ./su/02/env_FOO-options_--preserve-environment_bash
--run_test ./su/02/env_FOO-options_-
--run_test ./su/02/env_FOO-options_-_bash
--run_test ./su/02/env_FOO-options_-l-m
--run_test ./su/02/env_FOO-options_-l-m_bash
--run_test ./su/02/env_FOO-options_-l
--run_test ./su/02/env_FOO-options_-l_bash
--run_test ./su/02/env_FOO-options_-m_bash
--run_test ./su/02/env_FOO-options_-m
--run_test ./su/02/env_FOO-options_-p
--run_test ./su/02/env_FOO-options_-p_bash
--run_test ./su/02/env_FOO-options__bash
--run_test ./su/02/env_FOO-options_
--run_test ./su/02/env_FOO-options_-p-
--run_test ./su/02/env_FOO-options_-p-_bash
--run_test ./su/02/env_special-options_-l-p
--run_test ./su/02/env_special-options_-l
--run_test ./su/02/env_special-options_-l-p_bash
--run_test ./su/02/env_special-options_-l_bash
--run_test ./su/02/env_special-options_-p
--run_test ./su/02/env_special-options_-p_bash
--run_test ./su/02/env_special-options_
--run_test ./su/02/env_special-options__bash
--run_test ./su/02/env_special_root-options_-l-p
--run_test ./su/02/env_special_root-options_-l-p_bash
--run_test ./su/02/env_special_root-options_-l
--run_test ./su/02/env_special_root-options_-l_bash
--run_test ./su/02/env_special_root-options_-p
--run_test ./su/02/env_special_root-options_-p_bash
--run_test ./su/02/env_special_root-options_
--run_test ./su/02/env_special_root-options__bash
--run_test ./su/03/su_run_command01.test
--run_test ./su/03/su_run_command02.test
--run_test ./su/03/su_run_command03.test
--run_test ./su/03/su_run_command04.test
--run_test ./su/03/su_run_command05.test
--run_test ./su/03/su_run_command06.test
--run_test ./su/03/su_run_command07.test
--run_test ./su/03/su_run_command08.test
--run_test ./su/03/su_run_command09.test
--run_test ./su/03/su_run_command10.test
--run_test ./su/03/su_run_command11.test
--run_test ./su/03/su_run_command12.test
--run_test ./su/03/su_run_command13.test
--run_test ./su/03/su_run_command14.test
--run_test ./su/03/su_run_command15.test
--run_test ./su/03/su_run_command16.test
--run_test ./su/03/su_run_command17.test
--run_test ./su/04/su_wrong_user.test
--run_test ./su/04/su_user_wrong_passwd.test
--run_test ./su/04/su_user_wrong_passwd_syslog.test
--run_test ./su/05/su_user_wrong_passwd_syslog.test
--run_test ./su/06/su_user_syslog.test
--run_test ./su/07/su_user_syslog.test
--run_test ./su/08/env_special-options_
--run_test ./su/08/env_special_root-options_
--run_test ./su/09/env_special-options_
--run_test ./su/09/env_special_root-options_
--run_test ./su/10_su_sulog_success/su.test
--run_test ./su/11_su_sulog_failure/su.test
--run_test ./su/12_su_child_failure/su.test
--run_test ./su/13_su_child_success/su.test
- run_test ./libsubid/01_list_ranges/list_ranges.test
- run_test ./libsubid/02_get_subid_owners/get_subid_owners.test
- run_test ./libsubid/03_add_remove/add_remove_subids.test

debian/patches/debian/tests-libsubid-04_nss-fix-setting-basedir.patch

@@ -1,22 +0,0 @@
-From: Chris Hofstaedtler <zeha@debian.org>
-Date: Sat, 6 Jul 2024 23:35:51 +0200
-Subject: tests/libsubid/04_nss: fix setting basedir
-
----
- tests/libsubid/04_nss/Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/tests/libsubid/04_nss/Makefile b/tests/libsubid/04_nss/Makefile
-index 7d7ae3e..3fbf989 100644
---- a/tests/libsubid/04_nss/Makefile
-+++ b/tests/libsubid/04_nss/Makefile
-@@ -1,7 +1,7 @@
- all: test_nss libsubid_zzz.so
- 
--BASE_TEST_DIR ?= $(shell git rev-parse --show-toplevel)
--basedir := $(BASE_TEST_DIR)
-+BUILD_BASE_DIR ?= $(shell git rev-parse --show-toplevel)
-+basedir := $(BUILD_BASE_DIR)
- 
- test_nss: test_nss.c $(basedir)/lib/nss.c
- 	gcc -c -I$(basedir)/lib/ -I$(basedir) -o test_nss.o test_nss.c

debian/patches/series

@@ -1,10 +0,0 @@
-debian/cppw-Add-tool.patch
-debian/cppw-add-selinux-support.patch
-debian/Let-pam_unix-handle-login-failure-delays.patch
-debian/Set-group-and-mode-for-g-shadow-files.patch
-debian/Keep-using-Debian-adduser-defaults.patch
-debian/Document-the-shadowconfig-utility.patch
-debian/Recommend-using-adduser-and-deluser.patch
-debian/Relax-usernames-groupnames-checking.patch
-debian/tests-disable-su.patch
-debian/tests-libsubid-04_nss-fix-setting-basedir.patch

debian/rules

@@ -1,69 +0,0 @@
-#!/usr/bin/make -f
-# -*- mode: makefile; coding: utf-8 -*-
-
-# Enable PIE, BINDNOW, and possible future flags.
-export DEB_BUILD_MAINT_OPTIONS = hardening=+all
-DPKG_EXPORT_BUILDFLAGS = 1
-include /usr/share/dpkg/buildflags.mk
-include /usr/share/debhelper/dh_package_notes/package-notes.mk
-
-# Adds extra options when calling the configure script:
-DEB_CONFIGURE_EXTRA_FLAGS := \
-	--mandir=/usr/share/man \
-	--with-libpam \
-	--with-yescrypt \
-	--enable-shadowgrp \
-	--enable-subordinate-ids \
-	--enable-lastlog=no \
-	--enable-man \
-	--disable-account-tools-setuid \
-	--with-group-name-max-length=32 \
-	--with-acl \
-	--with-attr \
-	--without-su \
-	--without-tcb \
-
-
-ifneq ($(DEB_HOST_ARCH_OS),linux)
-DEB_CONFIGURE_EXTRA_FLAGS += --enable-logind
-DEB_CONFIGURE_EXTRA_FLAGS += --with-audit
-endif
-
-ifneq ($(filter nodoc,$(DEB_BUILD_PROFILES)),)
-DEB_CONFIGURE_EXTRA_FLAGS += --disable-man
-endif
-
-DEB_CONFIGURE_EXTRA_FLAGS += SHELL=/bin/sh
-
-# Set the default editor for vipw/vigr
-CFLAGS += -DDEFAULT_EDITOR="\"sensible-editor\""
-
-%:
-	dh $@
-
-override_dh_auto_configure:
-	dh_auto_configure -- $(DEB_CONFIGURE_EXTRA_FLAGS)
-
-override_dh_install-arch:
-ifneq ($(DEB_HOST_ARCH_OS),linux)
-	sed -i 's/session    optional   pam_keyinit.so/# Linux only # session    optional   pam_keyinit.so/' debian/login.pam
-endif
-	dh_install -a
-ifeq ($(DEB_HOST_ARCH_OS),hurd)
-	# /bin/login is provided by the hurd package.
-	rm -f debian/login/usr/bin/login
-endif
-
-override_dh_installpam:
-	# Distribute the pam.d files; unless for the commands with disabled PAM
-	# support
-	dh_installpam -p login
-	dh_installpam -p passwd --name=passwd
-	dh_installpam -p passwd --name=chfn
-	dh_installpam -p passwd --name=chsh
-	dh_installpam -p passwd --name=chpasswd
-	dh_installpam -p passwd --name=newusers
-
-override_dh_auto_clean:
-	sed -i 's/# Linux only # //' debian/login.pam
-	dh_auto_clean

debian/shadowconfig

@@ -1,70 +0,0 @@
-#!/bin/sh
-# turn shadow passwords on or off on a Debian system
-
-set -e
-
-shadowon () {
-    set -e
-
-    if [ -n "$DPKG_ROOT" ] \
-        && cmp "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/usr/share/base-passwd/passwd.master" 2>/dev/null \
-        && cmp "${DPKG_ROOT}/etc/group" "${DPKG_ROOT}/usr/share/base-passwd/group.master" 2>/dev/null; then
-        # If dpkg is run with --force-script-chrootless and if /etc/passwd
-        # and /etc/group are unchanged, we avoid the chroot() call by manually
-        # processing the files. This produces bit-by-bit identical results
-        # compared to the normal case as shown by the CI setup at
-        # https://salsa.debian.org/helmutg/dpkg-root-demo/-/jobs
-        for f in passwd group; do
-            cp -a "${DPKG_ROOT}/etc/$f" "${DPKG_ROOT}/etc/$f-"
-        done
-        chmod 600 "${DPKG_ROOT}/etc/passwd-"
-        sed -i 's/^\([^:]\+\):\*:/\1:x:/' "${DPKG_ROOT}/etc/group" "${DPKG_ROOT}/etc/passwd"
-        [ -n "$SOURCE_DATE_EPOCH" ] && epoch=$SOURCE_DATE_EPOCH || epoch=$(date +%s)
-        sed "s/^\([^:]\+\):.*/\1:*:$((epoch/60/60/24)):0:99999:7:::/" "${DPKG_ROOT}/etc/passwd" > "${DPKG_ROOT}/etc/shadow"
-        sed "s/^\([^:]\+\):.*/\1:*::/" "${DPKG_ROOT}/etc/group" > "${DPKG_ROOT}/etc/gshadow"
-        touch "${DPKG_ROOT}/etc/.pwd.lock"
-        chmod 600 "${DPKG_ROOT}/etc/.pwd.lock"
-    else
-        pwck -q -r
-        grpck -r
-        pwconv
-        grpconv
-    fi
-    chown root:root "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/etc/group"
-    chmod 644 "${DPKG_ROOT}/etc/passwd" "${DPKG_ROOT}/etc/group"
-    chown root:shadow "${DPKG_ROOT}/etc/shadow" "${DPKG_ROOT}/etc/gshadow"
-    chmod 640 "${DPKG_ROOT}/etc/shadow" "${DPKG_ROOT}/etc/gshadow"
-}
-
-shadowoff () {
-    set -e
-    pwck -q -r
-    grpck -r
-    pwunconv
-    grpunconv
-    # sometimes the passwd perms get munged
-    chown root:root /etc/passwd /etc/group
-    chmod 644 /etc/passwd /etc/group
-}
-
-case "$1" in
-    "on")
-	if shadowon ; then
-	    echo Shadow passwords are now on.
-	else
-	    echo Please correct the error and rerun \`$0 on\'
-	    exit 1
-	fi
-	;;
-    "off")
-	if shadowoff ; then
-	    echo Shadow passwords are now off.
-	else
-	    echo Please correct the error and rerun \`$0 off\'
-	    exit 1
-	fi
-	;;
-     *)
-	echo Usage: $0 on \| off
-	;;
-esac

debian/shlibs.local

@@ -1 +0,0 @@
-deb: libsubid 4 libsubid4 (= ${binary:Version})

debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

debian/tests/control

@@ -1,10 +0,0 @@
-Tests: smoke
-Restrictions: needs-root, superficial
-
-Tests: upstream
-Depends:
- expect,
- procps,
- @,
- @builddeps@
-Restrictions: needs-root, build-needed, breaks-testbed, allow-stderr, isolation-machine

debian/tests/smoke

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-set -e
-
-echo "Adding an user works"
-useradd shadow-test-user
-grep '^shadow-test-user:x:' /etc/passwd
-grep '^shadow-test-user:!:' /etc/shadow
-
-echo "Removing an user works"
-userdel shadow-test-user
-! grep 'shadow-test-user' /etc/passwd
-! grep 'shadow-test-user' /etc/shadow

debian/tests/upstream

@@ -1,15 +0,0 @@
-#!/bin/sh
-useradd ubuntu
-
-export BUILD_BASE_DIR=$(pwd)
-
-cd tests
-
-cleanup() {
-  cp testsuite.log $AUTOPKGTEST_ARTIFACTS/
-  cat testsuite.log
-}
-
-trap cleanup TERM EXIT
-
-./run_some 2>&1

debian/uidmap.install

@@ -1,3 +0,0 @@
-bin/getsubids usr/bin
-usr/bin/newgidmap
-usr/bin/newuidmap

debian/uidmap.lintian-overrides

@@ -1,2 +0,0 @@
-uidmap: elevated-privileges 4755 root/root [usr/bin/newgidmap]
-uidmap: elevated-privileges 4755 root/root [usr/bin/newuidmap]

debian/uidmap.manpages

@@ -1,5 +0,0 @@
-usr/share/man/*/man1/newgidmap.1
-usr/share/man/*/man1/newuidmap.1
-usr/share/man/man1/getsubids.1
-usr/share/man/man1/newgidmap.1
-usr/share/man/man1/newuidmap.1

debian/upstream/metadata

@@ -1,4 +0,0 @@
----
-Bug-Database: https://github.com/shadow-maint/shadow/issues
-Bug-Submit: https://github.com/shadow-maint/shadow/issues/new
-Repository-Browse: https://github.com/shadow-maint/shadow

debian/watch

@@ -1,7 +0,0 @@
-version=4
-opts=downloadurlmangle=s/archive\/refs\/tags\/(.*)\.tar\.gz/releases\/download\/$1\/@PACKAGE@-$1\.tar\.xz/,\
-    pgpsigurlmangle=s/$/.asc/,\
-    versionmangle=s/-(alpha|beta|rc)/~$1/,\
-    dversionmangle=s/\+dfsg1//,repacksuffix=+dfsg1 \
-    https://github.com/shadow-maint/@PACKAGE@/tags \
-    /shadow-maint/@PACKAGE@/archive/refs/tags/([^v].*)\.tar\.gz

doc/HOWTO

@@ -471,12 +471,12 @@
 
   The Shadow Suite contains replacement programs for:
 
-  su, login, passwd, newgrp, chfn, chsh, and id
+  su, login, passwd, newgrp, chfn, chsh
 
   The package also contains the new programs:
 
   chage, newusers, dpasswd, gpasswd, useradd, userdel, usermod,
-  groupadd, groupdel, groupmod, groups, pwck, grpck, lastlog, pwconv,
+  groupadd, groupdel, groupmod, pwck, grpck, lastlog, pwconv,
   and pwunconv
 
   Additionally, the library: libshadow.a is included for writing and/or
@@ -586,8 +586,6 @@
 
   ·  /usr/bin/chsh
 
-  ·  /usr/bin/id
-
   The BETA package has a save target in the Makefile, but it's commented
   out because different distributions place the programs in different
   places.
@@ -637,8 +635,6 @@
 
   ·  /usr/man/man1/chsh.1.gz
 
-  ·  /usr/man/man1/id.1.gz
-
   ·  /usr/man/man1/login.1.gz
 
   ·  /usr/man/man1/passwd.1.gz
@@ -1377,7 +1373,7 @@
   users or changing the group password, the /etc/gshadow file will be
   changed.
 
-  The programs groups, groupadd, groupmod, and groupdel are provided as
+  The programs groupadd, groupmod, and groupdel are provided as
   part of the Shadow Suite to modify groups.
 
   The format of the /etc/group file is as follows:
@@ -1755,7 +1751,7 @@
       }
   #ifdef HAS_SHADOW
       if ((pw->pw_passwd && pw->pw_passwd[0] == '@'
-           && pw_auth (pw->pw_passwd+1, pw->pw_name, PW_LOGIN, NULL))
+           && pw_auth(pw->pw_passwd+1, pw->pw_name))
           || !valid (passwd, pw)) {
           return (UPAP_AUTHNAK);
       }

doc/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/Makefile.in

@@ -250,7 +250,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/pam.d/Makefile.am

@@ -11,7 +11,6 @@ pamd_files = \
 	passwd
 
 pamd_acct_tools_files = \
-	chage \
 	chgpasswd \
 	groupadd \
 	groupdel \

etc/pam.d/Makefile.in

@@ -193,7 +193,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@
@@ -343,7 +342,6 @@ top_srcdir = @top_srcdir@
 pamd_files = chpasswd chfn chsh groupmems login newusers passwd \
 	$(am__append_2)
 pamd_acct_tools_files = \
-	chage \
 	chgpasswd \
 	groupadd \
 	groupdel \

etc/pam.d/chage

@@ -1,4 +0,0 @@
-#%PAM-1.0
-auth		sufficient	pam_rootok.so
-account		required	pam_permit.so
-password	include		system-auth

etc/shadow-maint/Makefile.in

@@ -158,7 +158,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

lib/Makefile.am

@@ -29,16 +29,48 @@ libshadow_la_SOURCES = \
 	age.c \
 	agetpass.c \
 	agetpass.h \
-	alloc.c \
-	alloc.h \
-	atoi/a2i.c \
-	atoi/a2i.h \
-	atoi/str2i.c \
-	atoi/str2i.h \
-	atoi/strtoi.c \
-	atoi/strtoi.h \
-	atoi/strtou_noneg.c \
-	atoi/strtou_noneg.h \
+	alloc/calloc.c \
+	alloc/calloc.h \
+	alloc/malloc.c \
+	alloc/malloc.h \
+	alloc/realloc.c \
+	alloc/realloc.h \
+	alloc/reallocf.c \
+	alloc/reallocf.h \
+	alloc/x/xcalloc.c \
+	alloc/x/xcalloc.h \
+	alloc/x/xmalloc.c \
+	alloc/x/xmalloc.h \
+	alloc/x/xrealloc.c \
+	alloc/x/xrealloc.h \
+	atoi/a2i/a2i.c \
+	atoi/a2i/a2i.h \
+	atoi/a2i/a2s.c \
+	atoi/a2i/a2s.h \
+	atoi/a2i/a2s_c.c \
+	atoi/a2i/a2s_c.h \
+	atoi/a2i/a2s_nc.c \
+	atoi/a2i/a2s_nc.h \
+	atoi/a2i/a2u.c \
+	atoi/a2i/a2u.h \
+	atoi/a2i/a2u_c.c \
+	atoi/a2i/a2u_c.h \
+	atoi/a2i/a2u_nc.c \
+	atoi/a2i/a2u_nc.h \
+	atoi/getnum.c \
+	atoi/getnum.h \
+	atoi/str2i/str2i.c \
+	atoi/str2i/str2i.h \
+	atoi/str2i/str2s.c \
+	atoi/str2i/str2s.h \
+	atoi/str2i/str2u.c \
+	atoi/str2i/str2u.h \
+	atoi/strtoi/strtoi.c \
+	atoi/strtoi/strtoi.h \
+	atoi/strtoi/strtou.c \
+	atoi/strtoi/strtou.h \
+	atoi/strtoi/strtou_noneg.c \
+	atoi/strtoi/strtou_noneg.h \
 	attr.h \
 	audit_help.c \
 	basename.c \
@@ -71,9 +103,11 @@ libshadow_la_SOURCES = \
 	find_new_sub_gids.c \
 	find_new_sub_uids.c \
 	fputsx.c \
-	get_gid.c \
+	fs/readlink/areadlink.c \
+	fs/readlink/areadlink.h \
+	fs/readlink/readlinknul.c \
+	fs/readlink/readlinknul.h \
 	get_pid.c \
-	get_uid.c \
 	getdate.h \
 	getdate.y \
 	getdef.c \
@@ -94,8 +128,6 @@ libshadow_la_SOURCES = \
 	lockpw.c \
 	loginprompt.c \
 	mail.c \
-	memzero.c \
-	memzero.h \
 	motd.c \
 	must_be.h \
 	myname.c \
@@ -119,11 +151,18 @@ libshadow_la_SOURCES = \
 	pwdcheck.c \
 	pwmem.c \
 	remove_tree.c \
-	rlogin.c \
 	root_flag.c \
 	run_part.h \
 	run_part.c \
 	salt.c \
+	search/cmp/cmp.c \
+	search/cmp/cmp.h \
+	search/l/lfind.c \
+	search/l/lfind.h \
+	search/l/lsearch.c \
+	search/l/lsearch.h \
+	search/sort/qsort.c \
+	search/sort/qsort.h \
 	selinux.c \
 	semanage.c \
 	setugid.c \
@@ -134,6 +173,8 @@ libshadow_la_SOURCES = \
 	sgroupio.c \
 	sgroupio.h\
 	shadow.c \
+	shadow/grp/agetgroups.c \
+	shadow/grp/agetgroups.h \
 	shadowio.c \
 	shadowio.h \
 	shadowlog.c \
@@ -145,18 +186,54 @@ libshadow_la_SOURCES = \
 	spawn.c \
 	sssd.c \
 	sssd.h \
-	string/sprintf.c \
-	string/sprintf.h \
-	string/stpecpy.c \
-	string/stpecpy.h \
-	string/stpeprintf.c \
-	string/stpeprintf.h \
+	string/ctype/strisascii/strisdigit.c \
+	string/ctype/strisascii/strisdigit.h \
+	string/memset/memzero.c \
+	string/memset/memzero.h \
+	string/sprintf/snprintf.c \
+	string/sprintf/snprintf.h \
+	string/sprintf/stpeprintf.c \
+	string/sprintf/stpeprintf.h \
+	string/sprintf/xasprintf.c \
+	string/sprintf/xasprintf.h \
+	string/strchr/strchrcnt.c \
+	string/strchr/strchrcnt.h \
+	string/strchr/strchrscnt.c \
+	string/strchr/strchrscnt.h \
+	string/strchr/strnul.c \
+	string/strchr/strnul.h \
+	string/strcmp/strcaseeq.c \
+	string/strcmp/strcaseeq.h \
+	string/strcmp/streq.c \
+	string/strcmp/streq.h \
+	string/strcpy/stpecpy.c \
+	string/strcpy/stpecpy.h \
+	string/strcpy/strncat.c \
+	string/strcpy/strncat.h \
+	string/strcpy/strncpy.c \
+	string/strcpy/strncpy.h \
+	string/strcpy/strtcpy.c \
+	string/strcpy/strtcpy.h \
+	string/strdup/strndupa.c \
+	string/strdup/strndupa.h \
+	string/strdup/xstrdup.c \
+	string/strdup/xstrdup.h \
+	string/strdup/xstrndup.c \
+	string/strdup/xstrndup.h \
 	string/strftime.c \
 	string/strftime.h \
-	string/strncpy.h \
-	string/strtcpy.c \
-	string/strtcpy.h \
-	string/zustr2stp.h \
+	string/strspn/stpspn.c \
+	string/strspn/stpspn.h \
+	string/strspn/stprcspn.c \
+	string/strspn/stprcspn.h \
+	string/strspn/stprspn.c \
+	string/strspn/stprspn.h \
+	string/strspn/strrcspn.c \
+	string/strspn/strrcspn.h \
+	string/strspn/strrspn.c \
+	string/strspn/strrspn.h \
+	string/strtok/stpsep.c \
+	string/strtok/stpsep.h \
 	strtoday.c \
 	sub.c \
 	subordinateio.h \
@@ -165,6 +242,7 @@ libshadow_la_SOURCES = \
 	time/day_to_str.c \
 	time/day_to_str.h \
 	ttytype.c \
+	typetraits.h \
 	tz.c \
 	ulimit.c \
 	user_busy.c \

lib/addgrps.c

@@ -1,114 +1,81 @@
-/*
- * SPDX-FileCopyrightText: 1989 - 1994, Julianne Frances Haugh
- * SPDX-FileCopyrightText: 1996 - 1998, Marek Michałkiewicz
- * SPDX-FileCopyrightText: 2001 - 2006, Tomasz Kłoczko
- * SPDX-FileCopyrightText: 2007 - 2009, Nicolas François
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
+// SPDX-FileCopyrightText: 1989-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2001-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2007-2009, Nicolas François
+// SPDX-FileCopyrightText: 2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
 
 #include <config.h>
 
-#if defined (HAVE_SETGROUPS) && ! defined (USE_PAM)
+#if !defined(USE_PAM)
 
 #include "prototypes.h"
 #include "defines.h"
 
-#include <stdio.h>
-#include <grp.h>
 #include <errno.h>
+#include <grp.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
 
-#include "alloc.h"
+#include "alloc/reallocf.h"
+#include "search/l/lsearch.h"
+#include "shadow/grp/agetgroups.h"
 #include "shadowlog.h"
+#include "string/strchr/strchrscnt.h"
 
-#ident "$Id$"
 
-#define SEP ",:"
 /*
  * Add groups with names from LIST (separated by commas or colons)
  * to the supplementary group set.  Silently ignore groups which are
- * already there.  Warning: uses strtok().
+ * already there.
  */
-int add_groups (const char *list)
+int
+add_groups(const char *list)
 {
-	GETGROUPS_T *grouplist;
-	size_t i;
-	int ngroups;
-	bool added;
-	char *token;
-	char buf[1024];
-	int ret;
+	char    *g, *p, *dup;
 	FILE *shadow_logfd = log_get_logfd();
+	gid_t   *gids;
+	size_t  n;
 
-	if (strlen (list) >= sizeof (buf)) {
-		errno = EINVAL;
+	gids = agetgroups(&n);
+	if (gids == NULL)
 		return -1;
-	}
-	strcpy (buf, list);
 
-	i = 16;
-	for (;;) {
-		grouplist = MALLOC(i, GETGROUPS_T);
-		if (NULL == grouplist) {
-			return -1;
-		}
-		ngroups = getgroups (i, grouplist);
-		if (   (   (-1 == ngroups)
-		        && (EINVAL != errno))
-		    || (i > (size_t)ngroups)) {
-			/* Unexpected failure of getgroups or successful
-			 * reception of the groups */
-			break;
-		}
-		/* not enough room, so try allocating a larger buffer */
-		free (grouplist);
-		i *= 2;
-	}
-	if (ngroups < 0) {
-		free (grouplist);
+	gids = REALLOCF(gids, n + strchrscnt(list, ",:") + 1, gid_t);
+	if (gids == NULL)
 		return -1;
-	}
 
-	added = false;
-	for (token = strtok (buf, SEP); NULL != token; token = strtok (NULL, SEP)) {
-		struct group *grp;
+	p = dup = strdup(list);
+	if (dup == NULL)
+		goto free_gids;
 
-		grp = getgrnam (token); /* local, no need for xgetgrnam */
+	while (NULL != (g = strsep(&p, ",:"))) {
+		struct group  *grp;
+
+		grp = getgrnam(g); /* local, no need for xgetgrnam */
 		if (NULL == grp) {
-			fprintf (shadow_logfd, _("Warning: unknown group %s\n"),
-				 token);
+			fprintf(shadow_logfd, _("Warning: unknown group %s\n"), g);
 			continue;
 		}
 
-		for (i = 0; i < (size_t)ngroups && grouplist[i] != grp->gr_gid; i++);
+		LSEARCH(&grp->gr_gid, gids, &n);
+	}
+	free(dup);
 
-		if (i < (size_t)ngroups) {
-			continue;
-		}
-
-		if (ngroups >= sysconf (_SC_NGROUPS_MAX)) {
-			fputs (_("Warning: too many groups\n"), shadow_logfd);
-			break;
-		}
-		grouplist = REALLOCF(grouplist, (size_t) ngroups + 1, GETGROUPS_T);
-		if (grouplist == NULL) {
-			return -1;
-		}
-		grouplist[ngroups] = grp->gr_gid;
-		ngroups++;
-		added = true;
+	if (setgroups(n, gids) == -1) {
+		fprintf(shadow_logfd, "setgroups: %s\n", strerror(errno));
+		goto free_gids;
 	}
 
-	if (added) {
-		ret = setgroups (ngroups, grouplist);
-		free (grouplist);
-		return ret;
-	}
-
-	free (grouplist);
+	free(gids);
 	return 0;
-}
-#else				/* HAVE_SETGROUPS && !USE_PAM */
-extern int ISO_C_forbids_an_empty_translation_unit;
-#endif				/* HAVE_SETGROUPS && !USE_PAM */
 
+free_gids:
+	free(gids);
+	return -1;
+}
+#else				/* !USE_PAM */
+extern int ISO_C_forbids_an_empty_translation_unit;
+#endif				/* !USE_PAM */

lib/adds.c

@@ -11,5 +11,3 @@
 
 extern inline long addsl2(long a, long b);
 extern inline long addslN(size_t n, long addend[n]);
-
-extern inline int cmpl(const void *p1, const void *p2);

lib/adds.h

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: 2023, Alejandro Colomar <alx@kernel.org>
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
 // SPDX-License-Identifier: BSD-3-Clause
 
 
@@ -11,8 +11,8 @@
 #include <errno.h>
 #include <limits.h>
 #include <stddef.h>
-#include <stdlib.h>
 
+#include "search/sort/qsort.h"
 #include "sizeof.h"
 
 
@@ -27,8 +27,6 @@
 inline long addsl2(long a, long b);
 inline long addslN(size_t n, long addend[n]);
 
-inline int cmpl(const void *p1, const void *p2);
-
 
 inline long
 addsl2(long a, long b)
@@ -57,7 +55,7 @@ addslN(size_t n, long addend[n])
 
 	e = errno;
 	while (n > 1) {
-		qsort(addend, n, sizeof(addend[0]), cmpl);
+		QSORT(addend, n);
 
 		errno = 0;
 		addend[0] = addsl2(addend[0], addend[--n]);
@@ -69,18 +67,4 @@ addslN(size_t n, long addend[n])
 }
 
 
-inline int
-cmpl(const void *p1, const void *p2)
-{
-	const long  *l1 = p1;
-	const long  *l2 = p2;
-
-	if (*l1 < *l2)
-		return -1;
-	if (*l1 > *l2)
-		return +1;
-	return 0;
-}
-
-
 #endif  // include guard

lib/age.c

@@ -106,7 +106,7 @@ int expire (const struct passwd *pw, /*@null@*/const struct spwd *sp)
 		 * passwd to work just like it would had they executed
 		 * it from the command line while logged in.
 		 */
-#if defined(HAVE_INITGROUPS) && ! defined(USE_PAM)
+#if !defined(USE_PAM)
 		if (setup_uid_gid (pw, false) != 0)
 #else
 		if (setup_uid_gid (pw) != 0)

lib/agetpass.c

@@ -16,7 +16,7 @@
 
 #ident "$Id$"
 
-#include "alloc.h"
+#include "alloc/malloc.h"
 
 #if WITH_LIBBSD == 0
 #include "freezero.h"

lib/alloc.c

@@ -1,73 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 1990 - 1994, Julianne Frances Haugh
- * SPDX-FileCopyrightText: 1996 - 1998, Marek Michałkiewicz
- * SPDX-FileCopyrightText: 2003 - 2006, Tomasz Kłoczko
- * SPDX-FileCopyrightText: 2008       , Nicolas François
- * SPDX-FileCopyrightText: 2023       , Alejandro Colomar <alx@kernel.org>
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/* Replacements for malloc and strdup with error checking.  Too trivial
-   to be worth copyrighting :-).  I did that because a lot of code used
-   malloc and strdup without checking for NULL pointer, and I like some
-   message better than a core dump...  --marekm
-
-   Yeh, but.  Remember that bailing out might leave the system in some
-   bizarre state.  You really want to put in error checking, then add
-   some back-out failure recovery code. -- jfh */
-
-#include <config.h>
-
-#ident "$Id$"
-
-#include "alloc.h"
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdio.h>
-
-#include "defines.h"
-#include "prototypes.h"
-#include "shadowlog.h"
-
-
-extern inline void *xmalloc(size_t size);
-extern inline void *xmallocarray(size_t nmemb, size_t size);
-extern inline void *mallocarray(size_t nmemb, size_t size);
-extern inline void *reallocarrayf(void *p, size_t nmemb, size_t size);
-extern inline char *xstrdup(const char *str);
-
-
-void *
-xcalloc(size_t nmemb, size_t size)
-{
-	void  *p;
-
-	p = calloc(nmemb, size);
-	if (p == NULL)
-		goto x;
-
-	return p;
-
-x:
-	fprintf(log_get_logfd(), _("%s: %s\n"),
-	        log_get_progname(), strerror(errno));
-	exit(13);
-}
-
-
-void *
-xreallocarray(void *p, size_t nmemb, size_t size)
-{
-	p = reallocarrayf(p, nmemb, size);
-	if (p == NULL)
-		goto x;
-
-	return p;
-
-x:
-	fprintf(log_get_logfd(), _("%s: %s\n"),
-	        log_get_progname(), strerror(errno));
-	exit(13);
-}

lib/alloc.h

@@ -1,101 +0,0 @@
-// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
-// SPDX-License-Identifier: BSD-3-Clause
-
-
-#ifndef SHADOW_INCLUDE_LIB_MALLOC_H_
-#define SHADOW_INCLUDE_LIB_MALLOC_H_
-
-
-#include <config.h>
-
-#include <assert.h>
-#include <errno.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <stdlib.h>
-
-#include "attr.h"
-#include "defines.h"
-
-
-#define CALLOC(n, type)   ((type *) calloc(n, sizeof(type)))
-#define XCALLOC(n, type)  ((type *) xcalloc(n, sizeof(type)))
-#define MALLOC(n, type)   ((type *) mallocarray(n, sizeof(type)))
-#define XMALLOC(n, type)  ((type *) xmallocarray(n, sizeof(type)))
-
-#define REALLOC(ptr, n, type)                                                 \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) reallocarray(ptr, n, sizeof(type)))   \
-)
-
-#define REALLOCF(ptr, n, type)                                                \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) reallocarrayf(ptr, n, sizeof(type)))  \
-)
-
-#define XREALLOC(ptr, n, type)                                                \
-(                                                                             \
-	_Generic(ptr, type *:  (type *) xreallocarray(ptr, n, sizeof(type)))  \
-)
-
-
-ATTR_MALLOC(free)
-inline void *xmalloc(size_t size);
-ATTR_MALLOC(free)
-inline void *xmallocarray(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline void *mallocarray(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline void *reallocarrayf(void *p, size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-inline char *xstrdup(const char *str);
-
-ATTR_MALLOC(free)
-void *xcalloc(size_t nmemb, size_t size);
-ATTR_MALLOC(free)
-void *xreallocarray(void *p, size_t nmemb, size_t size);
-
-
-inline void *
-xmalloc(size_t size)
-{
-	return xmallocarray(1, size);
-}
-
-
-inline void *
-xmallocarray(size_t nmemb, size_t size)
-{
-	return xreallocarray(NULL, nmemb, size);
-}
-
-
-inline void *
-mallocarray(size_t nmemb, size_t size)
-{
-	return reallocarray(NULL, nmemb, size);
-}
-
-
-inline void *
-reallocarrayf(void *p, size_t nmemb, size_t size)
-{
-	void  *q;
-
-	q = reallocarray(p, nmemb, size);
-
-	/* realloc(p, 0) is equivalent to free(p);  avoid double free.  */
-	if (q == NULL && nmemb != 0 && size != 0)
-		free(p);
-	return q;
-}
-
-
-inline char *
-xstrdup(const char *str)
-{
-	return strcpy(XMALLOC(strlen(str) + 1, char), str);
-}
-
-
-#endif  // include guard

lib/alloc/calloc.c

@@ -0,0 +1,11 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/calloc.h"

lib/alloc/calloc.h

@@ -0,0 +1,20 @@
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#ifndef SHADOW_INCLUDE_LIB_ALLOC_CALLOC_H_
+#define SHADOW_INCLUDE_LIB_ALLOC_CALLOC_H_
+
+
+#include <config.h>
+
+#include <stdlib.h>
+
+
+#define CALLOC(n, type)                                                       \
+(                                                                             \
+	(type *) calloc(n, sizeof(type))                                      \
+)
+
+
+#endif  // include guard

lib/alloc/malloc.c

@@ -0,0 +1,16 @@
+// SPDX-FileCopyrightText: 1990-1994, Julianne Frances Haugh
+// SPDX-FileCopyrightText: 1996-1998, Marek Michałkiewicz
+// SPDX-FileCopyrightText: 2003-2006, Tomasz Kłoczko
+// SPDX-FileCopyrightText: 2008     , Nicolas François
+// SPDX-FileCopyrightText: 2023-2024, Alejandro Colomar <alx@kernel.org>
+// SPDX-License-Identifier: BSD-3-Clause
+
+
+#include <config.h>
+
+#include "alloc/malloc.h"
+
+#include <stddef.h>
+
+
+extern inline void *mallocarray(size_t nmemb, size_t size);