Update changelog for 1:4.16.0-7 release

Those two missing spaces made the build of the libsubid/04_nss test
to fail.

Makefile.am

@@ -15,15 +15,4 @@ SUBDIRS += man
 endif
 
 CLEANFILES = man/8.out man/po/remove-potcdate.* man/*/login.defs.d man/*/*.mo
-
 EXTRA_DIST = tests/
-
-dist-hook:
-	chmod -R u+w $(distdir)/tests
-	chmod u+w $(distdir)
-	mv $(distdir)/tests/unit $(distdir)/realunittest
-	mv $(distdir)/tests/tests $(distdir)/realtests
-	rm -rf $(distdir)/tests
-	mv $(distdir)/realtests $(distdir)/tests
-	rm -rf $(distdir)/tests/unit $(distdir)/tests/Makefile*
-	mv $(distdir)/realunittest $(distdir)/tests/unit

Makefile.in

@@ -243,7 +243,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@
@@ -623,9 +622,6 @@ distdir-am: $(DISTFILES)
 	      || exit 1; \
 	  fi; \
 	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
 	-test -n "$(am__skip_mode_fix)" \
 	|| find "$(distdir)" -type d ! -perm -755 \
 		-exec chmod u+rwx,go+rx {} \; -o \
@@ -873,8 +869,8 @@ uninstall-am:
 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 	am--refresh check check-am clean clean-cscope clean-generic \
 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
-	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip dist-zstd distcheck distclean \
 	distclean-generic distclean-hdr distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
@@ -890,16 +886,6 @@ uninstall-am:
 .PRECIOUS: Makefile
 
 
-dist-hook:
-	chmod -R u+w $(distdir)/tests
-	chmod u+w $(distdir)
-	mv $(distdir)/tests/unit $(distdir)/realunittest
-	mv $(distdir)/tests/tests $(distdir)/realtests
-	rm -rf $(distdir)/tests
-	mv $(distdir)/realtests $(distdir)/tests
-	rm -rf $(distdir)/tests/unit $(distdir)/tests/Makefile*
-	mv $(distdir)/realunittest $(distdir)/tests/unit
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

aclocal.m4

@@ -22,15 +22,14 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
 
 # ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
 #
-#   Copyright (C) 1999-2008, 2011-2019, 2021-2022 Free Software
-#   Foundation, Inc.
+#   Copyright (C) 1999-2008, 2011-2015 Free Software Foundation, Inc.
 #   Written by Thomas Tanner, 1999
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 21 LTDL_INIT
+# serial 20 LTDL_INIT
 
 # LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
 # ------------------------------------------
@@ -358,7 +357,7 @@ AC_CONFIG_COMMANDS_PRE([
     if test -n "$_LT_LIBOBJS"; then
       # Remove the extension.
       _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
-      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | $SED "$_lt_sed_drop_objext" | sort -u`; do
+      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
         _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
         _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
       done
@@ -496,7 +495,7 @@ AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
     # If you are looking for one http://www.opendarwin.org/projects/dlcompat
     lt_cv_sys_dlopen_deplibs=yes
     ;;
-  freebsd* | dragonfly* | midnightbsd*)
+  freebsd* | dragonfly*)
     lt_cv_sys_dlopen_deplibs=yes
     ;;
   gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -931,7 +930,7 @@ AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
 
-# pkg.m4 - Macros to locate and use pkg-config.   -*- Autoconf -*-
+# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
 # serial 12 (pkg-config-0.29.2)
 
 dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
@@ -1019,7 +1018,7 @@ dnl Check to see whether a particular set of modules exists. Similar to
 dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
 dnl
 dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-dnl only at the first occurrence in configure.ac, so if the first place
+dnl only at the first occurence in configure.ac, so if the first place
 dnl it's called might be skipped (such as if it is within an "if", you
 dnl have to call PKG_CHECK_EXISTS manually
 AC_DEFUN([PKG_CHECK_EXISTS],
@@ -1088,14 +1087,14 @@ if test $pkg_failed = yes; then
         AC_MSG_RESULT([no])
         _PKG_SHORT_ERRORS_SUPPORTED
         if test $_pkg_short_errors_supported = yes; then
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
         else
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
-        m4_default([$4], [AC_MSG_ERROR(
+	m4_default([$4], [AC_MSG_ERROR(
 [Package requirements ($2) were not met:
 
 $$1_PKG_ERRORS
@@ -1107,7 +1106,7 @@ _PKG_TEXT])[]dnl
         ])
 elif test $pkg_failed = untried; then
         AC_MSG_RESULT([no])
-        m4_default([$4], [AC_MSG_FAILURE(
+	m4_default([$4], [AC_MSG_FAILURE(
 [The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
@@ -1117,10 +1116,10 @@ _PKG_TEXT
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
         ])
 else
-        $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-        $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
         AC_MSG_RESULT([yes])
-        $3
+	$3
 fi[]dnl
 ])dnl PKG_CHECK_MODULES
 
@@ -1207,74 +1206,6 @@ AS_VAR_COPY([$1], [pkg_cv_][$1])
 AS_VAR_IF([$1], [""], [$5], [$4])dnl
 ])dnl PKG_CHECK_VAR
 
-dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES,
-dnl   [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND],
-dnl   [DESCRIPTION], [DEFAULT])
-dnl ------------------------------------------
-dnl
-dnl Prepare a "--with-" configure option using the lowercase
-dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and
-dnl PKG_CHECK_MODULES in a single macro.
-AC_DEFUN([PKG_WITH_MODULES],
-[
-m4_pushdef([with_arg], m4_tolower([$1]))
-
-m4_pushdef([description],
-           [m4_default([$5], [build with ]with_arg[ support])])
-
-m4_pushdef([def_arg], [m4_default([$6], [auto])])
-m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes])
-m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no])
-
-m4_case(def_arg,
-            [yes],[m4_pushdef([with_without], [--without-]with_arg)],
-            [m4_pushdef([with_without],[--with-]with_arg)])
-
-AC_ARG_WITH(with_arg,
-     AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),,
-    [AS_TR_SH([with_]with_arg)=def_arg])
-
-AS_CASE([$AS_TR_SH([with_]with_arg)],
-            [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)],
-            [auto],[PKG_CHECK_MODULES([$1],[$2],
-                                        [m4_n([def_action_if_found]) $3],
-                                        [m4_n([def_action_if_not_found]) $4])])
-
-m4_popdef([with_arg])
-m4_popdef([description])
-m4_popdef([def_arg])
-
-])dnl PKG_WITH_MODULES
-
-dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
-dnl   [DESCRIPTION], [DEFAULT])
-dnl -----------------------------------------------
-dnl
-dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES
-dnl check._[VARIABLE-PREFIX] is exported as make variable.
-AC_DEFUN([PKG_HAVE_WITH_MODULES],
-[
-PKG_WITH_MODULES([$1],[$2],,,[$3],[$4])
-
-AM_CONDITIONAL([HAVE_][$1],
-               [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"])
-])dnl PKG_HAVE_WITH_MODULES
-
-dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
-dnl   [DESCRIPTION], [DEFAULT])
-dnl ------------------------------------------------------
-dnl
-dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after
-dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make
-dnl and preprocessor variable.
-AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES],
-[
-PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4])
-
-AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"],
-        [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])])
-])dnl PKG_HAVE_DEFINE_WITH_MODULES
-
 # Copyright (C) 2002-2021 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation

config.h.in

@@ -341,12 +341,6 @@
 /* Path to passwd program. */
 #undef PASSWD_PROGRAM
 
-/* Define if login should support the -r flag for rlogind. */
-#undef RLOGIN
-
-/* Define to the ruserok() "success" return value (0 or 1). */
-#undef RUSEROK
-
 /* Define to support the shadow group file. */
 #undef SHADOWGRP
 

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.71 for shadow 4.15.3.
+# Generated by GNU Autoconf 2.71 for shadow 4.16.0.
 #
 # Report bugs to <pkg-shadow-devel@lists.alioth.debian.org>.
 #
@@ -621,8 +621,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='shadow'
 PACKAGE_TARNAME='shadow'
-PACKAGE_VERSION='4.15.3'
-PACKAGE_STRING='shadow 4.15.3'
+PACKAGE_VERSION='4.16.0'
+PACKAGE_STRING='shadow 4.16.0'
 PACKAGE_BUGREPORT='pkg-shadow-devel@lists.alioth.debian.org'
 PACKAGE_URL='https://github.com/shadow-maint/shadow'
 
@@ -763,7 +763,6 @@ ac_ct_AR
 AR
 DLLTOOL
 OBJDUMP
-FILECMD
 NM
 ac_ct_DUMPBIN
 DUMPBIN
@@ -1489,7 +1488,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures shadow 4.15.3 to adapt to many kinds of systems.
+\`configure' configures shadow 4.16.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1560,7 +1559,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of shadow 4.15.3:";;
+     short | recursive ) echo "Configuration of shadow 4.16.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1739,7 +1738,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-shadow configure 4.15.3
+shadow configure 4.16.0
 generated by GNU Autoconf 2.71
 
 Copyright (C) 2021 Free Software Foundation, Inc.
@@ -2339,7 +2338,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by shadow $as_me 4.15.3, which was
+It was created by shadow $as_me 4.16.0, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   $ $0$ac_configure_args_raw
@@ -3612,7 +3611,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='shadow'
- VERSION='4.15.3'
+ VERSION='4.16.0'
 
 
 printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h
@@ -3846,13 +3845,13 @@ AM_BACKSLASH='\'
 ac_config_headers="$ac_config_headers config.h"
 
 
-LIBSUBID_ABI_MAJOR=4
+LIBSUBID_ABI_MAJOR=5
 
 LIBSUBID_ABI_MINOR=0
 
 LIBSUBID_ABI_MICRO=0
 
-LIBSUBID_ABI=4.0.0
+LIBSUBID_ABI=5.0.0
 
 
 test "$prefix" = "NONE" && prefix="/usr"
@@ -6357,8 +6356,8 @@ esac
 
 
 
-macro_version='2.4.7'
-macro_revision='2.4.7'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -6986,13 +6985,13 @@ else
 	mingw*) lt_bad_file=conftest.nm/nofile ;;
 	*) lt_bad_file=/dev/null ;;
 	esac
-	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
 	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
 	  break 2
 	  ;;
 	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
 	    break 2
@@ -7130,7 +7129,7 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
       DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
@@ -7223,7 +7222,7 @@ else $as_nop
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -7266,7 +7265,7 @@ else $as_nop
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[	 ]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -7471,114 +7470,6 @@ esac
 
 
 
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}file", so it can be a program name with args.
-set dummy ${ac_tool_prefix}file; ac_word=$2
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-printf %s "checking for $ac_word... " >&6; }
-if test ${ac_cv_prog_FILECMD+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  if test -n "$FILECMD"; then
-  ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  case $as_dir in #(((
-    '') as_dir=./ ;;
-    */) ;;
-    *) as_dir=$as_dir/ ;;
-  esac
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
-    ac_cv_prog_FILECMD="${ac_tool_prefix}file"
-    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-FILECMD=$ac_cv_prog_FILECMD
-if test -n "$FILECMD"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5
-printf "%s\n" "$FILECMD" >&6; }
-else
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_FILECMD"; then
-  ac_ct_FILECMD=$FILECMD
-  # Extract the first word of "file", so it can be a program name with args.
-set dummy file; ac_word=$2
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-printf %s "checking for $ac_word... " >&6; }
-if test ${ac_cv_prog_ac_ct_FILECMD+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  if test -n "$ac_ct_FILECMD"; then
-  ac_cv_prog_ac_ct_FILECMD="$ac_ct_FILECMD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  case $as_dir in #(((
-    '') as_dir=./ ;;
-    */) ;;
-    *) as_dir=$as_dir/ ;;
-  esac
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_FILECMD="file"
-    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_FILECMD=$ac_cv_prog_ac_ct_FILECMD
-if test -n "$ac_ct_FILECMD"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FILECMD" >&5
-printf "%s\n" "$ac_ct_FILECMD" >&6; }
-else
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-fi
-
-  if test "x$ac_ct_FILECMD" = x; then
-    FILECMD=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    FILECMD=$ac_ct_FILECMD
-  fi
-else
-  FILECMD="$ac_cv_prog_FILECMD"
-fi
-
-
-
-
-
-
-
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
@@ -7722,7 +7613,7 @@ beos*)
 
 bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='$FILECMD -L'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
@@ -7756,14 +7647,14 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=$FILECMD
+      lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
     esac
@@ -7777,7 +7668,7 @@ haiku*)
   ;;
 
 hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
@@ -7824,7 +7715,7 @@ netbsd* | netbsdelf*-gnu)
 
 newos6*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
@@ -8197,29 +8088,13 @@ esac
 fi
 
 : ${AR=ar}
+: ${AR_FLAGS=cr}
 
 
 
 
 
 
-# Use ARFLAGS variable as AR's operation code to sync the variable naming with
-# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
-# higher priority because thats what people were doing historically (setting
-# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
-# variable obsoleted/removed.
-
-test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
-lt_ar_flags=$AR_FLAGS
-
-
-
-
-
-
-# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
-# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
-
 
 
 
@@ -8636,7 +8511,7 @@ esac
 
 if test "$lt_cv_nm_interface" = "MS dumpbin"; then
   # Gets list of data symbols to import.
-  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
   # Adjust the below global symbol transforms to fixup imported variables.
   lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
   lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
@@ -8654,20 +8529,20 @@ fi
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
 $lt_cdecl_hook\
 " -e 's/^T .* \(.*\)$/extern int \1();/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
 $lt_c_name_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
 
 # Transform an extracted symbol line into symbol name with lib prefix and
 # symbol address.
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
 $lt_c_name_lib_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
@@ -8691,7 +8566,7 @@ for ac_symprfx in "" "_"; do
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
     # Fake it for dumpbin and say T for any non-static function,
     # D for any global variable and I for any imported variable.
-    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
+    # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
@@ -8709,9 +8584,9 @@ for ac_symprfx in "" "_"; do
 "     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
-    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -8911,7 +8786,7 @@ case $with_sysroot in #(
    fi
    ;; #(
  /*)
-   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
    ;; #(
  no|'')
    ;; #(
@@ -9036,7 +8911,7 @@ ia64-*-hpux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE=32
 	;;
@@ -9057,7 +8932,7 @@ ia64-*-hpux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     if test yes = "$lt_cv_prog_gnu_ld"; then
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
 	  ;;
@@ -9069,7 +8944,7 @@ ia64-*-hpux*)
 	;;
       esac
     else
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -32"
 	  ;;
@@ -9095,7 +8970,7 @@ mips64*-*linux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     emul=elf
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *32-bit*)
 	emul="${emul}32"
 	;;
@@ -9103,7 +8978,7 @@ mips64*-*linux*)
 	emul="${emul}64"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *MSB*)
 	emul="${emul}btsmip"
 	;;
@@ -9111,7 +8986,7 @@ mips64*-*linux*)
 	emul="${emul}ltsmip"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *N32*)
 	emul="${emul}n32"
 	;;
@@ -9135,14 +9010,14 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
       *32-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    case `$FILECMD conftest.o` in
+	    case `/usr/bin/file conftest.o` in
 	      *x86-64*)
 		LD="${LD-ld} -m elf32_x86_64"
 		;;
@@ -9250,7 +9125,7 @@ printf "%s\n" "$lt_cv_cc_needs_belf" >&6; }
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*)
@@ -10033,8 +9908,8 @@ int forced_loaded() { return 2;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5
-      $AR $AR_FLAGS libconftest.a conftest.o 2>&5
+      echo "$AR cr libconftest.a conftest.o" >&5
+      $AR cr libconftest.a conftest.o 2>&5
       echo "$RANLIB libconftest.a" >&5
       $RANLIB libconftest.a 2>&5
       cat > conftest.c << _LT_EOF
@@ -10061,12 +9936,17 @@ printf "%s\n" "$lt_cv_ld_force_load" >&6; }
       _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-    darwin*)
-      case $MACOSX_DEPLOYMENT_TARGET,$host in
-        10.[012],*|,*powerpc*-darwin[5-8]*)
-          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-        *)
-          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[912]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*|11.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -10363,8 +10243,8 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a '.a' archive for static linking (except MSVC and
-# ICC, which need '.lib').
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
 libext=a
 
 with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -10882,7 +10762,7 @@ lt_prog_compiler_static=
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
 	  lt_prog_compiler_pic='-KPIC'
@@ -11305,15 +11185,15 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
 
   case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++ or Intel C++ Compiler.
+    # Microsoft Visual C++.
     if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
   interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
   openbsd* | bitrig*)
@@ -11368,7 +11248,7 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -11480,7 +11360,6 @@ _LT_EOF
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
-      file_list_spec='@'
       ;;
 
     interix[3-9]*)
@@ -11495,7 +11374,7 @@ _LT_EOF
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
       archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -11538,7 +11417,7 @@ _LT_EOF
 	  compiler_needs_object=yes
 	  ;;
 	esac
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
 	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
@@ -11550,14 +11429,13 @@ _LT_EOF
 
         if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
             echo "local: *; };" >> $output_objdir/$libname.ver~
             $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
 	tcc*)
-	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  export_dynamic_flag_spec='-rdynamic'
 	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
@@ -11567,7 +11445,7 @@ _LT_EOF
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
               echo "local: *; };" >> $output_objdir/$libname.ver~
               $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
@@ -11699,7 +11577,7 @@ _LT_EOF
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -11970,12 +11848,12 @@ fi
 
     cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++ or Intel C++ Compiler.
+      # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       case $cc_basename in
-      cl* | icl*)
-	# Native MSVC or ICC
+      cl*)
+	# Native MSVC
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	always_export_symbols=yes
@@ -12016,7 +11894,7 @@ fi
           fi'
 	;;
       *)
-	# Assume MSVC and ICC wrapper
+	# Assume MSVC wrapper
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	# Tell ltmain to make .lib files, not .a files.
@@ -12057,8 +11935,8 @@ fi
     output_verbose_link_cmd=func_echo_all
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
-    archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
-    module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -12092,7 +11970,7 @@ fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly* | midnightbsd*)
+    freebsd* | dragonfly*)
       archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -12273,7 +12151,6 @@ printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
 	# Fabrice Bellard et al's Tiny C Compiler
 	ld_shlibs=yes
 	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	;;
       esac
       ;;
@@ -12345,7 +12222,6 @@ printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
-      file_list_spec='@'
       ;;
 
     osf3*)
@@ -13038,7 +12914,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
@@ -13048,14 +12924,14 @@ cygwin* | mingw* | pw32* | cegcc*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
     ;;
 
-  *,cl* | *,icl*)
-    # Native MSVC or ICC
+  *,cl*)
+    # Native MSVC
     libname_spec='$name'
     soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
     library_names_spec='$libname.dll.lib'
@@ -13074,7 +12950,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       done
       IFS=$lt_save_ifs
       # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
       ;;
     cygwin*)
       # Convert to unix form, then to dos form, then back to unix form
@@ -13111,7 +12987,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     ;;
 
   *)
-    # Assume MSVC and ICC wrapper
+    # Assume MSVC wrapper
     library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
@@ -13144,7 +13020,7 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
   if test -x /usr/bin/objformat; then
@@ -14309,41 +14185,30 @@ striplib=
 old_striplib=
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
 printf %s "checking whether stripping libraries is possible... " >&6; }
-if test -z "$STRIP"; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-else
-  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-    old_striplib="$STRIP --strip-debug"
-    striplib="$STRIP --strip-unneeded"
-    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-  else
-    case $host_os in
-    darwin*)
-      # FIXME - insert some real tests, host_os isn't really good enough
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-      ;;
-    freebsd*)
-      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
-        old_striplib="$STRIP --strip-debug"
-        striplib="$STRIP --strip-unneeded"
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-printf "%s\n" "yes" >&6; }
-      else
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
-printf "%s\n" "no" >&6; }
-      fi
-      ;;
-    *)
+    else
       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-      ;;
-    esac
-  fi
+    fi
+    ;;
+  *)
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+    ;;
+  esac
 fi
 
 
@@ -15848,15 +15713,6 @@ printf "%s\n" "$shadow_cv_passwd_dir" >&6; }
 printf "%s\n" "#define PASSWD_PROGRAM \"$shadow_cv_passwd_dir/passwd\"" >>confdefs.h
 
 
-if test "$ac_cv_func_ruserok" = "yes"; then
-
-printf "%s\n" "#define RLOGIN 1" >>confdefs.h
-
-
-printf "%s\n" "#define RUSEROK 0" >>confdefs.h
-
-fi
-
 # Check whether --enable-shadowgrp was given.
 if test ${enable_shadowgrp+y}
 then :
@@ -16409,26 +16265,26 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-                CMOCKA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "cmocka" 2>&1`
+	        CMOCKA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "cmocka" 2>&1`
         else
-                CMOCKA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "cmocka" 2>&1`
+	        CMOCKA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "cmocka" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$CMOCKA_PKG_ERRORS" >&5
+	# Put the nasty error message in config.log where it belongs
+	echo "$CMOCKA_PKG_ERRORS" >&5
 
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
 printf "%s\n" "$as_me: WARNING: libcmocka not found, cmocka tests will not be built" >&2;}
 elif test $pkg_failed = untried; then
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: libcmocka not found, cmocka tests will not be built" >&5
 printf "%s\n" "$as_me: WARNING: libcmocka not found, cmocka tests will not be built" >&2;}
 else
-        CMOCKA_CFLAGS=$pkg_cv_CMOCKA_CFLAGS
-        CMOCKA_LIBS=$pkg_cv_CMOCKA_LIBS
+	CMOCKA_CFLAGS=$pkg_cv_CMOCKA_CFLAGS
+	CMOCKA_LIBS=$pkg_cv_CMOCKA_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-        have_cmocka="yes"
+	have_cmocka="yes"
 fi
  if test x$have_cmocka = xyes; then
   HAVE_CMOCKA_TRUE=
@@ -17112,14 +16968,14 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-                LIBBSD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libbsd-overlay" 2>&1`
+	        LIBBSD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libbsd-overlay" 2>&1`
         else
-                LIBBSD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libbsd-overlay" 2>&1`
+	        LIBBSD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libbsd-overlay" 2>&1`
         fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$LIBBSD_PKG_ERRORS" >&5
+	# Put the nasty error message in config.log where it belongs
+	echo "$LIBBSD_PKG_ERRORS" >&5
 
-        as_fn_error $? "Package requirements (libbsd-overlay) were not met:
+	as_fn_error $? "Package requirements (libbsd-overlay) were not met:
 
 $LIBBSD_PKG_ERRORS
 
@@ -17132,7 +16988,7 @@ See the pkg-config man page for more details." "$LINENO" 5
 elif test $pkg_failed = untried; then
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-        { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+	{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
@@ -17145,8 +17001,8 @@ See the pkg-config man page for more details.
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details" "$LINENO" 5; }
 else
-        LIBBSD_CFLAGS=$pkg_cv_LIBBSD_CFLAGS
-        LIBBSD_LIBS=$pkg_cv_LIBBSD_LIBS
+	LIBBSD_CFLAGS=$pkg_cv_LIBBSD_CFLAGS
+	LIBBSD_LIBS=$pkg_cv_LIBBSD_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
 
@@ -20990,7 +20846,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by shadow $as_me 4.15.3, which was
+This file was extended by shadow $as_me 4.16.0, which was
 generated by GNU Autoconf 2.71.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -21059,7 +20915,7 @@ ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config='$ac_cs_config_escaped'
 ac_cs_version="\\
-shadow config.status 4.15.3
+shadow config.status 4.16.0
 configured by $0, generated by GNU Autoconf 2.71,
   with options \\"\$ac_cs_config\\"
 
@@ -21222,7 +21078,6 @@ lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_q
 lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
 reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
 reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`'
 OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
 deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
 file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
@@ -21231,7 +21086,6 @@ want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
 DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
 sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
 AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`'
 AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
 archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
 STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
@@ -21352,7 +21206,6 @@ LN_S \
 lt_SP2NL \
 lt_NL2SP \
 reload_flag \
-FILECMD \
 OBJDUMP \
 deplibs_check_method \
 file_magic_cmd \
@@ -21361,6 +21214,7 @@ want_nocaseglob \
 DLLTOOL \
 sharedlib_from_linklib_cmd \
 AR \
+AR_FLAGS \
 archiver_list_spec \
 STRIP \
 RANLIB \
@@ -22343,9 +22197,6 @@ to_host_file_cmd=$lt_cv_to_host_file_cmd
 # convert \$build files to toolchain format.
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
-# A file(cmd) program that detects file types.
-FILECMD=$lt_FILECMD
-
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
@@ -22370,11 +22221,8 @@ sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
 # The archiver.
 AR=$lt_AR
 
-# Flags to create an archive (by configure).
-lt_ar_flags=$lt_ar_flags
-
 # Flags to create an archive.
-AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
+AR_FLAGS=$lt_AR_FLAGS
 
 # How to feed a file listing to the archiver.
 archiver_list_spec=$lt_archiver_list_spec
@@ -22750,7 +22598,7 @@ ltmain=$ac_aux_dir/ltmain.sh
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  $SED '$q' "$ltmain" >> "$cfgfile" \
+  sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
    mv -f "$cfgfile" "$ofile" ||

configure.ac

@@ -1,10 +1,10 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_PREREQ([2.69])
-m4_define([libsubid_abi_major], 4)
+m4_define([libsubid_abi_major], 5)
 m4_define([libsubid_abi_minor], 0)
 m4_define([libsubid_abi_micro], 0)
 m4_define([libsubid_abi], [libsubid_abi_major.libsubid_abi_minor.libsubid_abi_micro])
-AC_INIT([shadow], [4.15.3], [pkg-shadow-devel@lists.alioth.debian.org], [],
+AC_INIT([shadow], [4.16.0], [pkg-shadow-devel@lists.alioth.debian.org], [],
 	[https://github.com/shadow-maint/shadow])
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects tar-pax])
 AC_CONFIG_MACRO_DIRS([m4])
@@ -159,13 +159,6 @@ fi])
 AC_DEFINE_UNQUOTED(PASSWD_PROGRAM, "$shadow_cv_passwd_dir/passwd",
 	[Path to passwd program.])
 
-dnl XXX - quick hack, should disappear before anyone notices :).
-dnl XXX - I just read the above message :).
-if test "$ac_cv_func_ruserok" = "yes"; then
-	AC_DEFINE(RLOGIN, 1, [Define if login should support the -r flag for rlogind.])
-	AC_DEFINE(RUSEROK, 0, [Define to the ruserok() "success" return value (0 or 1).])
-fi
-
 AC_ARG_ENABLE(shadowgrp,
 	[AS_HELP_STRING([--enable-shadowgrp], [enable shadow group support @<:@default=yes@:>@])],
 	[case "${enableval}" in

contrib/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

debian/NEWS

@@ -1,3 +1,12 @@
+shadow (1:4.16.0-5) unstable; urgency=medium
+
+  /var/log/faillog and the programs to read it are no longer part since
+  1:4.15.2-2.
+  The file isn't cleaned up automatically, which should be done manually,
+  unless it is still needed for special reasons.
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Sat, 16 Nov 2024 15:48:35 +0100
+
 shadow (1:4.13+dfsg1-2) unstable; urgency=medium
 
   The previous entry falsely states that PREVENT_NO_AUTH in /etc/login.defs

debian/changelog

@@ -1,3 +1,98 @@
+shadow (1:4.16.0-7) unstable; urgency=medium
+
+  [ Florent 'Skia' Jacquet ]
+  * d/patches: fix 'upstream' test suite
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Fri, 06 Dec 2024 13:51:40 +0100
+
+shadow (1:4.16.0-6) unstable; urgency=medium
+
+  * Add NEWS entry about faillog (Closes: #1074320)
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Fri, 06 Dec 2024 13:29:54 +0100
+
+shadow (1:4.16.0-5) unstable; urgency=medium
+
+  [ Chris Hofstaedtler ]
+  * Always build with btrfs support on linux-any (Closes: #856557)
+  * debputy.manifest: merge path-metadata entries
+  * login.defs: remove info about write(1)
+    Which is not part of Debian trixie. (Closes: #1087519)
+
+  [ Pino Toscano ]
+  * Include <utmpx.h>, fixing the build on GNU/Hurd
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Fri, 15 Nov 2024 20:30:32 +0100
+
+shadow (1:4.16.0-4) unstable; urgency=medium
+
+  * Drop Debian-only cppw, cpgr tools (Closes: #750752)
+  * Stop patching login, not installed anymore
+  * Define LOGIN_NAME_MAX on HURD
+  * Remove libsystemd-dev Build-Depends.
+    Only necessary for login(1).
+  * Stop building programs we do not install
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Tue, 06 Aug 2024 00:29:18 +0200
+
+shadow (1:4.16.0-3) unstable; urgency=medium
+
+  * Upload to unstable.
+  * Fix FTBFS on hurd.
+    DEB_HOST_ARCH_OS was unset.
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Mon, 05 Aug 2024 17:21:27 +0200
+
+shadow (1:4.16.0-2) experimental; urgency=medium
+
+  * passwd: switch Depends from login to login.defs
+    login will again be installed on fewer systems, but existing installs
+    will retain it (it is Protected: yes).
+  * Drop login package, to allow takeover by util-linux.
+    Move shadow.mo to Package: passwd, have passwd Replaces: older login.
+  * login.defs: ship manpage
+  * Re-add workarounds for tests in tests/tests directory.
+    4.15.3 fixed this, but 4.16.0 happened earlier.
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Mon, 05 Aug 2024 02:36:29 +0200
+
+shadow (1:4.16.0-1) experimental; urgency=medium
+
+  * New upstream version 4.16.0
+    * Rebase patches
+  * Split /etc/login.defs into its own binary package (Closes: #1074394)
+  * Rename libsubid4 to libsubid5 (soname bump)
+  * d/watch: add versionmangle for -rc
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Fri, 02 Aug 2024 17:35:29 +0200
+
+shadow (1:4.15.3-3) unstable; urgency=medium
+
+  * Forbid backslashes in user/group-names.
+    They can still be used with --force-badname, but it's a start. In the
+    long run I want to remove our relax patch, and upstream should fix the
+    line continuation too. For #1076619.
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Sun, 21 Jul 2024 21:05:32 +0200
+
+shadow (1:4.15.3-2) unstable; urgency=medium
+
+  [ Pino Toscano ]
+  * d/rules: actually enable Linux-only options on Linux
+    This enables --enable-logind and --with-audit.
+
+  [ Chris Hofstaedtler ]
+  * Stop installing groupmems(8) (Closes: #1004472, LP: #2039541)
+  * login.defs: remove obsolete/confusing comments
+  * login.defs: resync comments with upstream
+  * login.defs: remove incomplete list of unused vars
+  * login.defs: remove obscure, defaulted vars
+  * login.defs: remove vars ignored by su(1)
+  * login.defs: remove CONSOLE_GROUPS, ignored with PAM
+  * login.defs: remove CONSOLE, ignored with PAM
+
+ -- Chris Hofstaedtler <zeha@debian.org>  Sun, 07 Jul 2024 15:30:38 +0200
+
 shadow (1:4.15.3-1) unstable; urgency=medium
 
   * New upstream version 4.15.3

debian/control

@@ -23,7 +23,6 @@ Build-Depends:
  libpam0g-dev,
  libselinux1-dev [linux-any],
  libsemanage-dev [linux-any],
- libsystemd-dev [linux-any],
  libxml2-utils <!nodoc>,
  pkgconf,
  quilt,
@@ -41,33 +40,25 @@ Multi-Arch: foreign
 Depends:
  base-passwd (>= 3.6.4),
  libpam-modules,
- login
+ login.defs
 Recommends:
  sensible-utils
+Replaces:
+ login (<< 1:4.16.0-2~)
 Description: change and administer password and group data
  This package includes passwd, chsh, chfn, and many other programs to
  maintain password and group data.
  .
  Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
 
-Package: login
-Architecture: any
+Package: login.defs
+Architecture: all
 Multi-Arch: foreign
-Protected: yes
-Depends:
- libpam-modules,
- libpam-runtime
-Breaks:
- hurd (<< 20140206~) [hurd-any]
-Conflicts:
- python-4suite (<< 0.99cvs20060405-1)
 Replaces:
- hurd (<< 20140206~) [hurd-any]
-Description: system login tools
- This package provides support for console-based logins and for
- changing effective user or group IDs, including:
-  * login, the program that invokes a user shell on a virtual terminal;
-  * nologin, a dummy shell for disabled user accounts;
+ login (<< 1:4.16.0-2~)
+Description: system user management configuration
+ This package provides the login.defs configuration file,
+ used by otherwise unrelated tools managing system users.
 
 Package: uidmap
 Architecture: any
@@ -77,7 +68,7 @@ Description: programs to help use subuids
  These programs help unprivileged users to create uid and gid mappings in
  user namespaces.
 
-Package: libsubid4
+Package: libsubid5
 Section: libs
 Priority: optional
 Architecture: any
@@ -92,10 +83,10 @@ Priority: optional
 Architecture: any
 Multi-Arch: same
 Depends:
- libsubid4 (= ${binary:Version})
+ libsubid5 (= ${binary:Version})
 Description: subordinate id handling library -- shared library
  The library provides an interface for querying, granding and ungranting
  subordinate user and group ids.
  .
  This package contains the C header files that are
- needed for applications to use the libsubid4 library.
+ needed for applications to use the libsubid library.

debian/copyright

@@ -137,11 +137,6 @@ Copyright: 1999-2001, Ben Collins <bcollins@debian.org>
            2017-2022 Balint Reczey <balint@balintreczey.hu>
 License: BSD-3-clause
 
-Files: debian/patches/cppw-Add-tool.patch
-Copyright: 1997, Guy Maor <maor@ece.utexas.edu>
-           1999, Stephen Frost <sfrost@snowman.net>
-License: GPL-2+
-
 Files: debian/passwd.expire.cron
 Copyright: 1999, Ben Collins <bcollins@debian.org>
 License: BSD-3-clause

debian/cpgr.8

@@ -1 +0,0 @@
-.so man8/cppw.8

debian/cppw.8

@@ -1,27 +0,0 @@
-.TH CPPW 8 "7 Apr 2005"
-.SH NAME
-cppw, cpgr \- copy with locking the given file to the password or group file
-.SH SYNOPSIS
-\fBcppw\fR [\fB\-h\fR] [\fB\-s\fR] password_file
-.br
-\fBcpgr\fR [\fB\-h\fR] [\fB\-s\fR] group_file
-
-.SH DESCRIPTION
-.BR cppw " and " cpgr
-will copy, with locking, the given file to
-.IR /etc/passwd " and " /etc/group ", respectively."
-With the \fB\-s\fR flag, they will copy the shadow versions of those files,
-.IR /etc/shadow " and " /etc/gshadow ", respectively."
-
-With the \fB\-h\fR flag, the commands display a short help message and exit
-silently.
-.SH "SEE ALSO"
-.BR vipw (8),
-.BR vigr (8),
-.BR group (5),
-.BR passwd (5),
-.BR shadow (5),
-.BR gshadow (5)
-.SH AUTHOR
-\fBcppw\fR and \fBcpgr\fR were written by Stephen Frost, based on
-\fBvipw\fR and \fBvigr\fR written by Guy Maor.

debian/debputy.manifest

@@ -3,35 +3,22 @@ packages:
   passwd:
     transformations:
     - path-metadata:
-        path: usr/bin/chfn
+        paths:
+        - usr/bin/chfn
+        - usr/bin/chsh
+        - usr/bin/gpasswd
+        - usr/bin/passwd
         mode: "u=rwxs,go=rx"
     - path-metadata:
-        path: usr/bin/chsh
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/gpasswd
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/passwd
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/chage
+        paths:
+        - usr/bin/chage
+        - usr/bin/expiry
         group: "shadow"
         mode: "u=rwx,go=rxs"
-    - path-metadata:
-        path: usr/bin/expiry
-        group: "shadow"
-        mode: "u=rwx,go=rxs"
-  login:
-    transformations:
-    - path-metadata:
-        path: usr/bin/newgrp
-        mode: "u=rwxs,go=rx"
   uidmap:
     transformations:
     - path-metadata:
-        path: usr/bin/newgidmap
-        mode: "u=rwxs,go=rx"
-    - path-metadata:
-        path: usr/bin/newuidmap
+        paths:
+        - usr/bin/newgidmap
+        - usr/bin/newuidmap
         mode: "u=rwxs,go=rx"

debian/gbp.conf

@@ -0,0 +1,2 @@
+[pq]
+patch-numbers = False

debian/libsubid4.symbols

@@ -1,10 +0,0 @@
-libsubid.so.4 libsubid4 #MINVER#
- subid_get_gid_owners@Base 1:4.11.1
- subid_get_gid_ranges@Base 1:4.11.1
- subid_get_uid_owners@Base 1:4.11.1
- subid_get_uid_ranges@Base 1:4.11.1
- subid_grant_gid_range@Base 1:4.11.1
- subid_grant_uid_range@Base 1:4.11.1
- subid_init@Base 1:4.11.1
- subid_ungrant_gid_range@Base 1:4.11.1
- subid_ungrant_uid_range@Base 1:4.11.1

debian/libsubid5.symbols

@@ -0,0 +1,11 @@
+libsubid.so.5 libsubid5 #MINVER#
+ subid_free@Base 1:4.16.0
+ subid_get_gid_owners@Base 1:4.16.0
+ subid_get_gid_ranges@Base 1:4.16.0
+ subid_get_uid_owners@Base 1:4.16.0
+ subid_get_uid_ranges@Base 1:4.16.0
+ subid_grant_gid_range@Base 1:4.16.0
+ subid_grant_uid_range@Base 1:4.16.0
+ subid_init@Base 1:4.16.0
+ subid_ungrant_gid_range@Base 1:4.16.0
+ subid_ungrant_uid_range@Base 1:4.16.0

debian/login.defs

@@ -1,324 +0,0 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-ERASECHAR	0177
-KILLCHAR	025
-
-# HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new
-# home directories.
-HOME_MODE	0700
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-# Extra per user uids
-SUB_UID_MIN		   100000
-SUB_UID_MAX		600100000
-SUB_UID_COUNT		    65536
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-# Extra per user group ids
-SUB_GID_MIN		   100000
-SUB_GID_MAX		600100000
-SUB_GID_COUNT		    65536
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default is no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# If set to yes, userdel will remove the user's group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-# Other former uses of this variable such as setting the umask when
-# user==primary group are not used in PAM environments, such as Debian
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to MD5, MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to BCRYPT, BCRYPT-based algorithm will be used for encrypting password
-# If set to YESCRYPT, YESCRYPT-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# MD5 and DES should not be used for new hashes, see crypt(5) for recommendations.
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD YESCRYPT
-
-#
-# The pwck(8) utility emits a warning for any system account with a home
-# directory that does not exist.  Some system accounts intentionally do
-# not have a home directory.  Such accounts may have this string as
-# their home directory in /etc/passwd to avoid a spurious warning.
-#
-NONEXISTENT	/nonexistent
-
-#
-# Allow newuidmap and newgidmap when running under an alternative
-# primary group.
-#
-#GRANT_AUX_GROUP_SUBIDS yes
-
-#
-# Select the HMAC cryptography algorithm.
-# Used in pam_timestamp module to calculate the keyed-hash message
-# authentication code.
-#
-# Note: It is recommended to check hmac(3) to see the possible algorithms
-# that are available in your system.
-#
-#HMAC_CRYPTO_ALGO SHA512
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-

debian/login.defs.install

@@ -0,0 +1 @@
+etc/login.defs etc

debian/login.defs.manpages

@@ -0,0 +1,2 @@
+usr/share/man/*/man5/login.defs.5
+usr/share/man/man5/login.defs.5

debian/login.defs.postinst

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+set -e
+
+_adopt_conffile() {
+    conffile=$1
+    pkg=$2
+
+    [ -f ${conffile}.dpkg-bak ] || return 0
+
+    md5sum="$(md5sum ${conffile} | sed -e 's/ .*//')"
+    old_md5sum="$(dpkg-query -W -f='${Conffiles}' $pkg | \
+                        sed -n -e "\' ${conffile} ' { s/ obsolete$//; s/.* //; p }")"
+    # On new installs, if the conffile was preserved on upgrade by
+    # dpkg-maintscript helper, copy it back if the new file has not been
+    # modified yet
+    if [ "$md5sum" = "$old_md5sum" ]; then
+        mv ${conffile}.dpkg-bak ${conffile}
+    fi
+}
+
+if [ "$1" = configure ] && [ -z "$2" ]; then
+    _adopt_conffile /etc/login.defs login.defs
+fi
+
+#DEBHELPER#

debian/login.dirs

@@ -1 +0,0 @@
-usr/share/lintian/overrides

debian/login.install

@@ -1,5 +0,0 @@
-bin/login usr/bin
-debian/login.defs etc
-sbin/nologin usr/sbin
-usr/bin/newgrp
-usr/share/locale/*/LC_MESSAGES/shadow.mo

debian/login.links

@@ -1 +0,0 @@
-usr/bin/newgrp usr/bin/sg

debian/login.lintian-overrides

@@ -1 +0,0 @@
-login: elevated-privileges 4755 root/root [usr/bin/newgrp]

debian/login.maintscript

@@ -1 +0,0 @@
-rm_conffile /etc/securetty 1:4.7-1~

debian/login.manpages

@@ -1,10 +0,0 @@
-usr/share/man/*/man1/login.1
-usr/share/man/*/man1/newgrp.1
-usr/share/man/*/man1/sg.1
-usr/share/man/*/man5/login.defs.5
-usr/share/man/*/man8/nologin.8
-usr/share/man/man1/login.1
-usr/share/man/man1/newgrp.1
-usr/share/man/man1/sg.1
-usr/share/man/man5/login.defs.5
-usr/share/man/man8/nologin.8

debian/login.pam

@@ -1,96 +0,0 @@
-#
-# The PAM configuration file for the Shadow `login' service
-#
-
-# Enforce a minimal delay in case of failure (in microseconds).
-# (Replaces the `FAIL_DELAY' setting from login.defs)
-# Note that other modules may require another minimal delay. (for example,
-# to disable any delay, you should add the nodelay option to pam_unix)
-auth       optional   pam_faildelay.so  delay=3000000
-
-# Outputs an issue file prior to each login prompt (Replaces the
-# ISSUE_FILE option from login.defs). Uncomment for use
-# auth       required   pam_issue.so issue=/etc/issue
-
-# Disallows other than root logins when /etc/nologin exists
-# (Replaces the `NOLOGINS_FILE' option from login.defs)
-auth       requisite  pam_nologin.so
-
-# SELinux needs to be the first session rule. This ensures that any
-# lingering context has been cleared. Without this it is possible
-# that a module could execute code in the wrong domain.
-# When the module is present, "required" would be sufficient (When SELinux
-# is disabled, this returns success.)
-session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
-
-# Sets the loginuid process attribute
-session    required     pam_loginuid.so
-
-# Prints the message of the day upon successful login.
-# (Replaces the `MOTD_FILE' option in login.defs)
-# This includes a dynamically generated part from /run/motd.dynamic
-# and a static (admin-editable) part from /etc/motd.
-session    optional   pam_motd.so motd=/run/motd.dynamic
-session    optional   pam_motd.so noupdate
-
-# SELinux needs to intervene at login time to ensure that the process
-# starts in the proper default security context. Only sessions which are
-# intended to run in the user's context should be run after this.
-# pam_selinux.so changes the SELinux context of the used TTY and configures
-# SELinux in order to transition to the user context with the next execve()
-# call.
-session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
-# When the module is present, "required" would be sufficient (When SELinux
-# is disabled, this returns success.)
-
-# This module parses environment configuration file(s)
-# and also allows you to use an extended config
-# file /etc/security/pam_env.conf.
-# 
-# parsing /etc/environment needs "readenv=1"
-session       required   pam_env.so readenv=1
-# locale variables can also be set in /etc/default/locale
-# reading this file *in addition to /etc/environment* does not hurt
-session       required   pam_env.so readenv=1 envfile=/etc/default/locale
-
-# Standard Un*x authentication.
-@include common-auth
-
-# This allows certain extra groups to be granted to a user
-# based on things like time of day, tty, service, and user.
-# Please edit /etc/security/group.conf to fit your needs
-# (Replaces the `CONSOLE_GROUPS' option in login.defs)
-auth       optional   pam_group.so
-
-# Uncomment and edit /etc/security/time.conf if you need to set
-# time restraint on logins.
-# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
-# as well as /etc/porttime)
-# account    requisite  pam_time.so
-
-# Uncomment and edit /etc/security/access.conf if you need to
-# set access limits.
-# (Replaces /etc/login.access file)
-# account  required       pam_access.so
-
-# Sets up user limits according to /etc/security/limits.conf
-# (Replaces the use of /etc/limits in old login)
-session    required   pam_limits.so
-
-# Prints the status of the user's mailbox upon successful login
-# (Replaces the `MAIL_CHECK_ENAB' option from login.defs). 
-#
-# This also defines the MAIL environment variable
-# However, userdel also needs MAIL_DIR and MAIL_FILE variables
-# in /etc/login.defs to make sure that removing a user 
-# also removes the user's mail spool file.
-# See comments in /etc/login.defs
-session    optional   pam_mail.so standard
-
-# Create a new session keyring.
-session    optional   pam_keyinit.so force revoke
-
-# Standard Un*x account and session
-@include common-account
-@include common-session
-@include common-password

debian/not-installed

@@ -1,4 +1,6 @@
 bin/groups
+bin/login
+# Workaround debhelper complaining about login.defs, although we install it.
 etc/login.defs
 etc/pam.d/chfn
 etc/pam.d/chage
@@ -14,27 +16,39 @@ etc/pam.d/passwd
 etc/pam.d/useradd
 etc/pam.d/userdel
 etc/pam.d/usermod
+sbin/nologin
+usr/bin/newgrp
 usr/bin/faillog
 usr/bin/sg
 usr/lib/*/libsubid.la
+usr/sbin/groupmems
 usr/sbin/logoutd
 usr/sbin/vigr
 usr/share/man/*/man1/groups.1
+usr/share/man/*/man1/login.1
 usr/share/man/*/man1/logoutd.1
+usr/share/man/*/man1/newgrp.1
+usr/share/man/*/man1/sg.1
 usr/share/man/*/man1/su.1
 usr/share/man/*/man3/getspnam.3
 usr/share/man/*/man3/shadow.3
 usr/share/man/*/man5/faillog.5
 usr/share/man/*/man5/suauth.5
 usr/share/man/*/man8/faillog.8
+usr/share/man/*/man8/groupmems.8
 usr/share/man/*/man8/logoutd.8
+usr/share/man/*/man8/nologin.8
 usr/share/man/man1/groups.1
+usr/share/man/man1/login.1
 usr/share/man/man1/logoutd.1
+usr/share/man/man1/newgrp.1
+usr/share/man/man1/sg.1
 usr/share/man/man1/su.1
 usr/share/man/man3/getspnam.3
 usr/share/man/man3/shadow.3
 usr/share/man/man5/faillog.5
 usr/share/man/man5/suauth.5
 usr/share/man/man8/faillog.8
+usr/share/man/man8/groupmems.8
 usr/share/man/man8/logoutd.8
-
+usr/share/man/man8/nologin.8

debian/passwd.install

@@ -8,10 +8,8 @@ usr/bin/gpasswd
 usr/bin/passwd
 usr/sbin/chgpasswd
 usr/sbin/chpasswd
-usr/sbin/cppw
 usr/sbin/groupadd
 usr/sbin/groupdel
-usr/sbin/groupmems
 usr/sbin/groupmod
 usr/sbin/grpck
 usr/sbin/grpconv
@@ -24,3 +22,4 @@ usr/sbin/useradd
 usr/sbin/userdel
 usr/sbin/usermod
 usr/sbin/vipw
+usr/share/locale/*/LC_MESSAGES/shadow.mo

debian/passwd.links

@@ -1,2 +1 @@
-usr/sbin/cppw usr/sbin/cpgr
 usr/sbin/vipw usr/sbin/vigr

debian/passwd.manpages

@@ -1,5 +1,3 @@
-debian/cpgr.8
-debian/cppw.8
 usr/share/man/*/man1/chage.1
 usr/share/man/*/man1/chfn.1
 usr/share/man/*/man1/chsh.1
@@ -15,7 +13,6 @@ usr/share/man/*/man8/chgpasswd.8
 usr/share/man/*/man8/chpasswd.8
 usr/share/man/*/man8/groupadd.8
 usr/share/man/*/man8/groupdel.8
-usr/share/man/*/man8/groupmems.8
 usr/share/man/*/man8/groupmod.8
 usr/share/man/*/man8/grpck.8
 usr/share/man/*/man8/grpconv.8
@@ -45,7 +42,6 @@ usr/share/man/man8/chgpasswd.8
 usr/share/man/man8/chpasswd.8
 usr/share/man/man8/groupadd.8
 usr/share/man/man8/groupdel.8
-usr/share/man/man8/groupmems.8
 usr/share/man/man8/groupmod.8
 usr/share/man/man8/grpck.8
 usr/share/man/man8/grpconv.8

debian/patches/debian/Adapt-login.defs-for-Debian.patch

@@ -0,0 +1,517 @@
+From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
+Date: Sun, 7 Jul 2024 14:06:39 +0200
+Subject: Adapt login.defs for Debian
+
+Remove settings only applicable to shadow's su, which we do not use.
+Remove settings only applicable without PAM support enabled.
+Remove obscure commented-out settings.
+Remove explanation about write(1), which Debian does not ship anymore.
+---
+ etc/login.defs | 375 ++++++++-------------------------------------------------
+ 1 file changed, 47 insertions(+), 328 deletions(-)
+
+diff --git a/etc/login.defs b/etc/login.defs
+index 33622c2..91d3ec4 100644
+--- a/etc/login.defs
++++ b/etc/login.defs
+@@ -1,24 +1,38 @@
+ #
+ # /etc/login.defs - Configuration control definitions for the shadow package.
+ #
+-#	$Id$
+-#
+ 
+-#
+-# Delay in seconds before being allowed another attempt after a login failure
+-# Note: When PAM is used, some modules may enforce a minimum delay (e.g.
+-#       pam_unix(8) enforces a 2s delay)
+-#
+-FAIL_DELAY		3
+-
+-#
+-# Enable logging and display of /var/log/faillog login(1) failure info.
+-#
+-FAILLOG_ENAB		yes
++# REQUIRED for useradd/userdel/usermod
++#   Directory where mailboxes reside, _or_ name of file, relative to the
++#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
++#   MAIL_DIR takes precedence.
++#
++#   Essentially:
++#      - MAIL_DIR defines the location of users mail spool files
++#        (for mbox use) by appending the username to MAIL_DIR as defined
++#        below.
++#      - MAIL_FILE defines the location of the users mail spool files as the
++#        fully-qualified filename obtained by prepending the user home
++#        directory before $MAIL_FILE
++#
++# NOTE: This is no more used for setting up users MAIL environment variable
++#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
++#       job of the pam_mail PAM modules
++#       See default PAM configuration files provided for
++#       login, su, etc.
++#
++# This is a temporary situation: setting these variables will soon
++# move to /etc/default/useradd and the variables will then be
++# no more supported
++MAIL_DIR        /var/mail
++#MAIL_FILE      .mail
+ 
+ #
+ # Enable display of unknown usernames when login(1) failures are recorded.
+ #
++# WARNING: Unknown usernames may become world readable.
++# See #290803 and #298773 for details about how this could become a security
++# concern
+ LOG_UNKFAIL_ENAB	no
+ 
+ #
+@@ -26,110 +40,12 @@ LOG_UNKFAIL_ENAB	no
+ #
+ LOG_OK_LOGINS		no
+ 
+-#
+-# Enable logging and display of /var/log/lastlog login(1) time info.
+-#
+-LASTLOG_ENAB		yes
+-
+-#
+-# Limit the highest user ID number for which the lastlog entries should
+-# be updated.
+-#
+-# No LASTLOG_UID_MAX means that there is no user ID limit for writing
+-# lastlog entries.
+-#
+-#LASTLOG_UID_MAX
+-
+-#
+-# Enable checking and display of mailbox status upon login.
+-#
+-# Disable if the shell startup files already check for mail
+-# ("mailx -e" or equivalent).
+-#
+-MAIL_CHECK_ENAB		yes
+-
+-#
+-# Enable additional checks upon password changes.
+-#
+-OBSCURE_CHECKS_ENAB	yes
+-
+-#
+-# Enable checking of time restrictions specified in /etc/porttime.
+-#
+-PORTTIME_CHECKS_ENAB	yes
+-
+-#
+-# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field.
+-#
+-QUOTAS_ENAB		yes
+-
+-#
+-# Enable "syslog" logging of su(1) activity - in addition to sulog file logging.
+-# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1).
+-#
+-SYSLOG_SU_ENAB		yes
+-SYSLOG_SG_ENAB		yes
+-
+-#
+-# If defined, either full pathname of a file containing device names or
+-# a ":" delimited list of device names.  Root logins will be allowed only
+-# from these devices.
+-#
+-CONSOLE		/etc/securetty
+-#CONSOLE	console:tty01:tty02:tty03:tty04
+-
+-#
+-# If defined, all su(1) activity is logged to this file.
+-#
+-#SULOG_FILE	/var/log/sulog
+-
+-#
+-# If defined, ":" delimited list of "message of the day" files to
+-# be displayed upon login.
+-#
+-MOTD_FILE	/etc/motd
+-#MOTD_FILE	/etc/motd:/usr/lib/news/news-motd
+-
+-#
+-# If defined, this file will be output before each login(1) prompt.
+-#
+-#ISSUE_FILE	/etc/issue
+-
+ #
+ # If defined, file which maps tty line to TERM environment parameter.
+ # Each line of the file is in a format similar to "vt100  tty01".
+ #
+ #TTYTYPE_FILE	/etc/ttytype
+ 
+-#
+-# If defined, login(1) failures will be logged here in a utmp format.
+-# last(1), when invoked as lastb(1), will read /var/log/btmp, so...
+-#
+-FTMP_FILE	/var/log/btmp
+-
+-#
+-# If defined, name of file whose presence will inhibit non-root
+-# logins.  The content of this file should be a message indicating
+-# why logins are inhibited.
+-#
+-NOLOGINS_FILE	/etc/nologin
+-
+-#
+-# If defined, the command name to display when running "su -".  For
+-# example, if this is defined as "su" then ps(1) will display the
+-# command as "-su".  If not defined, then ps(1) will display the
+-# name of the shell actually being run, e.g. something like "-sh".
+-#
+-SU_NAME		su
+-
+-#
+-# *REQUIRED*
+-#   Directory where mailboxes reside, _or_ name of file, relative to the
+-#   home directory.  If you _do_ define both, MAIL_DIR takes precedence.
+-#
+-MAIL_DIR	/var/spool/mail
+-#MAIL_FILE	.mail
+-
+ #
+ # If defined, file which inhibits all the usual chatter during the login
+ # sequence.  If a full pathname, then hushed mode will be enabled if the
+@@ -139,40 +55,21 @@ MAIL_DIR	/var/spool/mail
+ HUSHLOGIN_FILE	.hushlogin
+ #HUSHLOGIN_FILE	/etc/hushlogins
+ 
+-#
+-# If defined, either a TZ environment parameter spec or the
+-# fully-rooted pathname of a file containing such a spec.
+-#
+-#ENV_TZ		TZ=CST6CDT
+-#ENV_TZ		/etc/tzname
+-
+-#
+-# If defined, an HZ environment parameter spec.
+-#
+-# for Linux/x86
+-ENV_HZ		HZ=100
+-# For Linux/Alpha...
+-#ENV_HZ		HZ=1024
+-
+ #
+ # *REQUIRED*  The default PATH settings, for superuser and normal users.
+ #
+ # (they are minimal, add the rest in the shell startup files)
+-ENV_SUPATH	PATH=/sbin:/bin:/usr/sbin:/usr/bin
+-ENV_PATH	PATH=/bin:/usr/bin
++ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
++ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ 
+ #
+-# Terminal permissions
++# Terminal permissions for terminals after login(1).
++# These settings are ignored for remote and other logins.
+ #
+ #	TTYGROUP	Login tty will be assigned this group ownership.
+ #	TTYPERM		Login tty will be set to this permission.
+ #
+-# If you have a write(1) program which is "setgid" to a special group
+-# which owns the terminals, define TTYGROUP as the number of such group
+-# and TTYPERM as 0620.  Otherwise leave TTYGROUP commented out and
+-# set TTYPERM to either 622 or 600.
+-#
+-TTYGROUP	tty
++#TTYGROUP	tty
+ TTYPERM		0600
+ 
+ #
+@@ -180,61 +77,35 @@ TTYPERM		0600
+ #
+ #	ERASECHAR	Terminal ERASE character ('\010' = backspace).
+ #	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
+-#	ULIMIT		Default "ulimit" value.
+ #
+ # The ERASECHAR and KILLCHAR are used only on System V machines.
+-# The ULIMIT is used only if the system supports it.
+-# (now it works with setrlimit too; ulimit is in 512-byte units)
+-#
+-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+ #
+ ERASECHAR	0177
+ KILLCHAR	025
+-#ULIMIT		2097152
+-
+-# Default initial "umask" value used by login(1) on non-PAM enabled systems.
+-# Default "umask" value for pam_umask(8) on PAM enabled systems.
+-# UMASK is also used by useradd(8) and newusers(8) to set the mode for new
+-# home directories if HOME_MODE is not set.
+-# 022 is the default value, but 027, or even 077, could be considered
+-# for increased privacy. There is no One True Answer here: each sysadmin
+-# must make up their mind.
+-UMASK		022
+ 
+ # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new
+ # home directories.
+-# If HOME_MODE is not set, the value of UMASK is used to create the mode.
+-#HOME_MODE	0700
++HOME_MODE	0700
+ 
+ #
+ # Password aging controls:
+ #
+ #	PASS_MAX_DAYS	Maximum number of days a password may be used.
+ #	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
+-#	PASS_MIN_LEN	Minimum acceptable password length.
+ #	PASS_WARN_AGE	Number of days warning given before a password expires.
+ #
+ PASS_MAX_DAYS	99999
+ PASS_MIN_DAYS	0
+-PASS_MIN_LEN	5
+ PASS_WARN_AGE	7
+ 
+-#
+-# If "yes", the user must be listed as a member of the first gid 0 group
+-# in /etc/group (called "root" on most Linux systems) to be able to "su"
+-# to uid 0 accounts.  If the group doesn't exist or is empty, no one
+-# will be able to "su" to uid 0.
+-#
+-SU_WHEEL_ONLY	no
+-
+ #
+ # Min/max values for automatic uid selection in useradd(8)
+ #
+ UID_MIN			 1000
+ UID_MAX			60000
+ # System accounts
+-SYS_UID_MIN		  101
+-SYS_UID_MAX		  999
++#SYS_UID_MIN		  101
++#SYS_UID_MAX		  999
+ # Extra per user uids
+ SUB_UID_MIN		   100000
+ SUB_UID_MAX		600100000
+@@ -246,8 +117,8 @@ SUB_UID_COUNT		    65536
+ GID_MIN			 1000
+ GID_MAX			60000
+ # System accounts
+-SYS_GID_MIN		  101
+-SYS_GID_MAX		  999
++#SYS_GID_MIN		  101
++#SYS_GID_MAX		  999
+ # Extra per user group ids
+ SUB_GID_MIN		   100000
+ SUB_GID_MAX		600100000
+@@ -255,6 +126,9 @@ SUB_GID_COUNT		    65536
+ 
+ #
+ # Max number of login(1) retries if password is bad
++# This will most likely be overriden by PAM, since the default pam_unix module
++# has it's own built in of 3 retries. However, this is a safe fallback in case
++# you are using an authentication module that does not enforce PAM_MAXTRIES.
+ #
+ LOGIN_RETRIES		5
+ 
+@@ -263,28 +137,6 @@ LOGIN_RETRIES		5
+ #
+ LOGIN_TIMEOUT		60
+ 
+-#
+-# Maximum number of attempts to change password if rejected (too easy)
+-#
+-PASS_CHANGE_TRIES	5
+-
+-#
+-# Warn about weak passwords (but still allow them) if you are root.
+-#
+-PASS_ALWAYS_WARN	yes
+-
+-#
+-# Number of significant characters in the password for crypt().
+-# Default is 8, don't change unless your crypt() is better.
+-# Ignored if MD5_CRYPT_ENAB set to "yes".
+-#
+-#PASS_MAX_LEN		8
+-
+-#
+-# Require password before chfn(1)/chsh(1) can make any changes.
+-#
+-CHFN_AUTH		yes
+-
+ #
+ # Which fields may be changed by regular users using chfn(1) - use
+ # any combination of letters "frwh" (full name, room number, work
+@@ -294,29 +146,6 @@ CHFN_AUTH		yes
+ CHFN_RESTRICT		rwh
+ 
+ #
+-# Password prompt (%s will be replaced by user name).
+-#
+-# XXX - it doesn't work correctly yet, for now leave it commented out
+-# to use the default which is just "Password: ".
+-#LOGIN_STRING		"%s's Password: "
+-
+-#
+-# Only works if compiled with MD5_CRYPT defined:
+-# If set to "yes", new passwords will be encrypted using the MD5-based
+-# algorithm compatible with the one used by recent releases of FreeBSD.
+-# It supports passwords of unlimited length and longer salt strings.
+-# Set to "no" if you need to copy encrypted passwords to other systems
+-# which don't understand the new algorithm.  Default is "no".
+-#
+-# Note: If you use PAM, it is recommended to use a value consistent with
+-# the PAM modules configuration.
+-#
+-# This variable is deprecated. You should use ENCRYPT_METHOD instead.
+-#
+-#MD5_CRYPT_ENAB	no
+-
+-#
+-# Only works if compiled with ENCRYPTMETHOD_SELECT defined:
+ # If set to MD5, MD5-based algorithm will be used for encrypting password
+ # If set to SHA256, SHA256-based algorithm will be used for encrypting password
+ # If set to SHA512, SHA512-based algorithm will be used for encrypting password
+@@ -326,66 +155,10 @@ CHFN_RESTRICT		rwh
+ # MD5 and DES should not be used for new hashes, see crypt(5) for recommendations.
+ # Overrides the MD5_CRYPT_ENAB option
+ #
+-# Note: If you use PAM, it is recommended to use a value consistent with
++# Note: It is recommended to use a value consistent with
+ # the PAM modules configuration.
+ #
+-#ENCRYPT_METHOD DES
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
+-#
+-# Define the number of SHA rounds.
+-# With a lot of rounds, it is more difficult to brute-force the password.
+-# However, more CPU resources will be needed to authenticate users if
+-# this value is increased.
+-#
+-# If not specified, the libc will choose the default number of rounds (5000),
+-# which is orders of magnitude too low for modern hardware.
+-# The values must be within the 1000-999999999 range.
+-# If only one of the MIN or MAX values is set, then this value will be used.
+-# If MIN > MAX, the highest value will be used.
+-#
+-#SHA_CRYPT_MIN_ROUNDS 5000
+-#SHA_CRYPT_MAX_ROUNDS 5000
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to BCRYPT.
+-#
+-# Define the number of BCRYPT rounds.
+-# With a lot of rounds, it is more difficult to brute-force the password.
+-# However, more CPU resources will be needed to authenticate users if
+-# this value is increased.
+-#
+-# If not specified, 13 rounds will be attempted.
+-# If only one of the MIN or MAX values is set, then this value will be used.
+-# If MIN > MAX, the highest value will be used.
+-#
+-#BCRYPT_MIN_ROUNDS 13
+-#BCRYPT_MAX_ROUNDS 13
+-
+-#
+-# Only works if ENCRYPT_METHOD is set to YESCRYPT.
+-#
+-# Define the YESCRYPT cost factor.
+-# With a higher cost factor, it is more difficult to brute-force the password.
+-# However, more CPU time and more memory will be needed to authenticate users
+-# if this value is increased.
+-#
+-# If not specified, a cost factor of 5 will be used.
+-# The value must be within the 1-11 range.
+-#
+-#YESCRYPT_COST_FACTOR 5
+-
+-#
+-# List of groups to add to the user's supplementary group set
+-# when logging in from the console (as determined by the CONSOLE
+-# setting).  Default is none.
+-#
+-# Use with caution - it is possible for users to gain permanent
+-# access to these groups, even when not logged in from the console.
+-# How to do it is left as an exercise for the reader...
+-#
+-#CONSOLE_GROUPS		floppy:audio:cdrom
++ENCRYPT_METHOD YESCRYPT
+ 
+ #
+ # Should login be allowed if we can't cd to the home directory?
+@@ -401,12 +174,6 @@ DEFAULT_HOME	yes
+ #
+ NONEXISTENT	/nonexistent
+ 
+-#
+-# If this file exists and is readable, login environment will be
+-# read from it.  Every line should be in the form name=value.
+-#
+-ENVIRON_FILE	/etc/environment
+-
+ #
+ # If defined, this command is run when removing a user.
+ # It should remove any at/cron/print jobs etc. owned by
+@@ -415,59 +182,11 @@ ENVIRON_FILE	/etc/environment
+ #USERDEL_CMD	/usr/sbin/userdel_local
+ 
+ #
+-# Enable setting of the umask group bits to be the same as owner bits
+-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+-# the same as gid, and username is the same as the primary group name.
++# If set to yes, userdel(8) will remove the user's group if it contains no more
++# members, and useradd(8) will create by default a group with the name of the
++# user.
+ #
+-# This also enables userdel(8) to remove user groups if no members exist.
++# Other former uses of this variable are not used in PAM environments, such as
++# Debian.
+ #
+ USERGROUPS_ENAB yes
+-
+-#
+-# If set to a non-zero number, the shadow utilities will make sure that
+-# groups never have more than this number of users on one line.
+-# This permits to support split groups (groups split into multiple lines,
+-# with the same group ID, to avoid limitation of the line length in the
+-# group file).
+-#
+-# 0 is the default value and disables this feature.
+-#
+-#MAX_MEMBERS_PER_GROUP	0
+-
+-#
+-# If useradd(8) should create home directories for users by default (non
+-# system users only).
+-# This option is overridden with the -M or -m flags on the useradd(8)
+-# command-line.
+-#
+-#CREATE_HOME     yes
+-
+-#
+-# Force use shadow, even if shadow passwd & shadow group files are
+-# missing.
+-#
+-#FORCE_SHADOW    yes
+-
+-#
+-# Allow newuidmap and newgidmap when running under an alternative
+-# primary group.
+-#
+-#GRANT_AUX_GROUP_SUBIDS yes
+-
+-#
+-# Prevents an empty password field to be interpreted as "no authentication
+-# required".
+-# Set to "yes" to prevent for all accounts
+-# Set to "superuser" to prevent for UID 0 / root (default)
+-# Set to "no" to not prevent for any account (dangerous, historical default)
+-PREVENT_NO_AUTH superuser
+-
+-#
+-# Select the HMAC cryptography algorithm.
+-# Used in pam_timestamp module to calculate the keyed-hash message
+-# authentication code.
+-#
+-# Note: It is recommended to check hmac(3) to see the possible algorithms
+-# that are available in your system.
+-#
+-#HMAC_CRYPTO_ALGO SHA512

debian/patches/debian/Define-LOGIN_NAME_MAX-on-HURD.patch

@@ -0,0 +1,25 @@
+From: Chris Hofstaedtler <zeha@debian.org>
+Date: Tue, 6 Aug 2024 00:16:59 +0200
+Subject: Define LOGIN_NAME_MAX on HURD
+
+---
+ lib/chkname.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/lib/chkname.c b/lib/chkname.c
+index 9954410..751fdf0 100644
+--- a/lib/chkname.c
++++ b/lib/chkname.c
+@@ -26,6 +26,12 @@
+ #include <stddef.h>
+ #include <unistd.h>
+ 
++#ifdef __GNU__
++#ifndef LOGIN_NAME_MAX
++#define LOGIN_NAME_MAX 256
++#endif
++#endif
++
+ #include "defines.h"
+ #include "chkname.h"
+ 

debian/patches/debian/Let-pam_unix-handle-login-failure-delays.patch

@@ -1,106 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: Let pam_unix handle login failure delays
-
-Fixes: #87648
-
-Status wrt upstream: Forwarded but not applied yet
-
-Note: If removed, FAIL_DELAY must be re-added to /etc/login.defs
----
- lib/getdef.c |  1 -
- src/login.c  | 19 +++++--------------
- 2 files changed, 5 insertions(+), 15 deletions(-)
-
-diff --git a/lib/getdef.c b/lib/getdef.c
-index 30f54ba..21307bb 100644
---- a/lib/getdef.c
-+++ b/lib/getdef.c
-@@ -84,7 +84,6 @@ static struct itemdef def_table[] = {
- 	{"ENV_PATH", NULL},
- 	{"ENV_SUPATH", NULL},
- 	{"ERASECHAR", NULL},
--	{"FAIL_DELAY", NULL},
- 	{"FAKE_SHELL", NULL},
- 	{"GID_MAX", NULL},
- 	{"GID_MIN", NULL},
-diff --git a/src/login.c b/src/login.c
-index 9fed7b3..a5512d1 100644
---- a/src/login.c
-+++ b/src/login.c
-@@ -490,7 +490,6 @@ int main (int argc, char **argv)
- 	const char     *tmptty;
- 	const char     *cp;
- 	const char     *tmp;
--	unsigned int   delay;
- 	unsigned int   retries;
- 	unsigned int   timeout;
- 	struct passwd  *pwd = NULL;
-@@ -500,6 +499,7 @@ int main (int argc, char **argv)
- 	char           *pam_user = NULL;
- 	pid_t          child;
- #else
-+	unsigned int   delay;
- 	bool is_console;
- 	struct spwd *spwd = NULL;
- # if defined(ENABLE_LASTLOG)
-@@ -669,7 +669,6 @@ int main (int argc, char **argv)
- 	}
- 
- 	environ = newenvp;	/* make new environment active */
--	delay   = getdef_unum ("FAIL_DELAY", 1);
- 	retries = getdef_unum ("LOGIN_RETRIES", RETRIES);
- 
- #ifdef USE_PAM
-@@ -685,8 +684,7 @@ int main (int argc, char **argv)
- 
- 	/*
- 	 * hostname & tty are either set to NULL or their correct values,
--	 * depending on how much we know. We also set PAM's fail delay to
--	 * ours.
-+	 * depending on how much we know.
- 	 *
- 	 * PAM_RHOST and PAM_TTY are used for authentication, only use
- 	 * information coming from login or from the caller (e.g. no utmp)
-@@ -695,10 +693,6 @@ int main (int argc, char **argv)
- 	PAM_FAIL_CHECK;
- 	retcode = pam_set_item (pamh, PAM_TTY, tty);
- 	PAM_FAIL_CHECK;
--#ifdef HAS_PAM_FAIL_DELAY
--	retcode = pam_fail_delay (pamh, 1000000 * delay);
--	PAM_FAIL_CHECK;
--#endif
- 	/* if fflg, then the user has already been authenticated */
- 	if (!fflg) {
- 		char          hostn[256];
-@@ -736,12 +730,6 @@ int main (int argc, char **argv)
- 			bool failed = false;
- 
- 			failcount++;
--#ifdef HAS_PAM_FAIL_DELAY
--			if (delay > 0) {
--				retcode = pam_fail_delay(pamh, 1000000*delay);
--				PAM_FAIL_CHECK;
--			}
--#endif
- 
- 			retcode = pam_authenticate (pamh, 0);
- 
-@@ -1032,14 +1020,17 @@ int main (int argc, char **argv)
- 		free (username);
- 		username = NULL;
- 
-+#ifndef USE_PAM
- 		/*
- 		 * Wait a while (a la SVR4 /usr/bin/login) before attempting
- 		 * to login the user again. If the earlier alarm occurs
- 		 * before the sleep() below completes, login will exit.
- 		 */
-+		delay = getdef_unum ("FAIL_DELAY", 1);
- 		if (delay > 0) {
- 			(void) sleep (delay);
- 		}
-+#endif
- 
- 		(void) puts (_("Login incorrect"));
- 

debian/patches/debian/Relax-usernames-groupnames-checking.patch

@@ -2,10 +2,10 @@ From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
 Date: Sat, 22 Jun 2024 17:39:41 +0200
 Subject: Relax usernames/groupnames checking
 
-Allows any non-empty user/grounames that don't contain ':', ',' or '\n'
-characters and don't start with '-', '+', or '~'. This patch is more
-restrictive than original Karl's version. closes: #264879
-Also closes: #377844
+Allows any non-empty user/grounames that don't contain ':', ',', '\\' or
+'\n' characters and don't start with '-', '+', or '~'. This patch is
+more restrictive than original Karl's version. closes: #264879 Also
+closes: #377844
 
 Comments from Karl Ramm (shadow 1:4.0.3-9, 20 Aug 2003 02:06:50 -0400):
 
@@ -22,7 +22,7 @@ Status wrt upstream: Debian specific. Not to be used upstream
  3 files changed, 29 insertions(+), 32 deletions(-)
 
 diff --git a/lib/chkname.c b/lib/chkname.c
-index 995562f..d9678c6 100644
+index 995562f..9954410 100644
 --- a/lib/chkname.c
 +++ b/lib/chkname.c
 @@ -54,44 +54,27 @@ static bool is_valid_name (const char *name)
@@ -51,7 +51,7 @@ index 995562f..d9678c6 100644
 +	 * portable filename character set [A-Za-z0-9._-], and that the hyphen
 +	 * should not be used as the first character of a portable user name.
 +	 *
-+	 * Allow more relaxed user/group names in Debian -- ^[^-~+:,\s][^:,\s]*$
++	 * Allow more relaxed user/group names in Debian -- ^[^-~+:,\\\s][^:,\\\s]*$
 +	 */
 +	if (   ('\0' == *name)
 +	    || ('-'  == *name)
@@ -72,7 +72,7 @@ index 995562f..d9678c6 100644
 -		      (*name == '$' && name[1] == '\0')
 -		     )) {
 +	do {
-+		if ((':' == *name) || (',' == *name) || isspace(*name)) {
++		if ((':' == *name) || (',' == *name) || ('\\' == *name) || isspace(*name)) {
  			return false;
  		}
 -		numeric &= isdigit(*name);

debian/patches/debian/Stop-building-programs-we-do-not-install.patch

@@ -0,0 +1,537 @@
+From: Chris Hofstaedtler <zeha@debian.org>
+Date: Tue, 6 Aug 2024 00:27:13 +0200
+Subject: Stop building programs we do not install
+
+---
+ man/Makefile.am       | 19 -------------------
+ man/cs/Makefile.am    |  5 -----
+ man/da/Makefile.am    |  4 ----
+ man/de/Makefile.am    |  9 ---------
+ man/fr/Makefile.am    | 10 ----------
+ man/it/Makefile.am    | 10 ----------
+ man/ja/Makefile.am    |  8 --------
+ man/ko/Makefile.am    |  2 --
+ man/pl/Makefile.am    |  5 -----
+ man/ru/Makefile.am    |  8 --------
+ man/sv/Makefile.am    |  7 -------
+ man/tr/Makefile.am    |  2 --
+ man/uk/Makefile.am    | 10 ----------
+ man/zh_CN/Makefile.am |  9 ---------
+ man/zh_TW/Makefile.am |  2 --
+ src/Makefile.am       |  7 +++----
+ 16 files changed, 3 insertions(+), 114 deletions(-)
+
+diff --git a/man/Makefile.am b/man/Makefile.am
+index dab98f4..2beb0e4 100644
+--- a/man/Makefile.am
++++ b/man/Makefile.am
+@@ -13,35 +13,26 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+-	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+@@ -83,27 +74,20 @@ man_XMANS = \
+ 	chpasswd.8.xml \
+ 	chsh.1.xml \
+ 	expiry.1.xml \
+-	faillog.5.xml \
+-	faillog.8.xml \
+ 	getsubids.1.xml \
+ 	gpasswd.1.xml \
+ 	groupadd.8.xml \
+ 	groupdel.8.xml \
+ 	groupmems.8.xml \
+ 	groupmod.8.xml \
+-	groups.1.xml \
+ 	grpck.8.xml \
+ 	gshadow.5.xml \
+ 	limits.5.xml \
+-	login.1.xml \
+ 	login.access.5.xml \
+ 	login.defs.5.xml \
+-	logoutd.8.xml \
+ 	newgidmap.1.xml \
+-	newgrp.1.xml \
+ 	newuidmap.1.xml \
+ 	newusers.8.xml \
+-	nologin.8.xml \
+ 	passwd.1.xml \
+ 	passwd.5.xml \
+ 	porttime.5.xml \
+@@ -112,9 +96,6 @@ man_XMANS = \
+ 	shadowconfig.8.xml \
+ 	shadow.3.xml \
+ 	shadow.5.xml \
+-	sg.1.xml \
+-	su.1.xml \
+-	suauth.5.xml \
+ 	subgid.5.xml \
+ 	subuid.5.xml \
+ 	useradd.8.xml \
+diff --git a/man/cs/Makefile.am b/man/cs/Makefile.am
+index 84407d7..42638c4 100644
+--- a/man/cs/Makefile.am
++++ b/man/cs/Makefile.am
+@@ -3,19 +3,14 @@ mandir = @mandir@/cs
+ 
+ man_MANS = \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+-	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man5/gshadow.5 \
+-	man8/nologin.8 \
+ 	man5/passwd.5 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+ 	man8/vipw.8
+ 
+ if ENABLE_LASTLOG
+diff --git a/man/da/Makefile.am b/man/da/Makefile.am
+index a3b0922..f8e957d 100644
+--- a/man/da/Makefile.am
++++ b/man/da/Makefile.am
+@@ -5,12 +5,8 @@ mandir = @mandir@/da
+ man_MANS = \
+ 	man1/chfn.1 \
+ 	man8/groupdel.8 \
+-	man1/groups.1 \
+ 	man5/gshadow.5 \
+-	man8/logoutd.8 \
+ 	man1/newgrp.1 \
+-	man8/nologin.8 \
+-	man1/sg.1 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+ 
+diff --git a/man/de/Makefile.am b/man/de/Makefile.am
+index 671432d..777e5bf 100644
+--- a/man/de/Makefile.am
++++ b/man/de/Makefile.am
+@@ -8,8 +8,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+@@ -21,22 +19,15 @@ man_MANS = \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/fr/Makefile.am b/man/fr/Makefile.am
+index 78aee9a..b454b94 100644
+--- a/man/fr/Makefile.am
++++ b/man/fr/Makefile.am
+@@ -8,36 +8,26 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+-	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/it/Makefile.am b/man/it/Makefile.am
+index b76187f..cf220b7 100644
+--- a/man/it/Makefile.am
++++ b/man/it/Makefile.am
+@@ -8,35 +8,25 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+-	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/ja/Makefile.am b/man/ja/Makefile.am
+index c72097f..374adee 100644
+--- a/man/ja/Makefile.am
++++ b/man/ja/Makefile.am
+@@ -7,8 +7,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+@@ -17,10 +15,7 @@ man_MANS = \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+@@ -28,10 +23,7 @@ man_MANS = \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+ 	man8/shadowconfig.8 \
+-	man1/sg.1 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/ko/Makefile.am b/man/ko/Makefile.am
+index c269f0b..6d15190 100644
+--- a/man/ko/Makefile.am
++++ b/man/ko/Makefile.am
+@@ -5,9 +5,7 @@ man_MANS = \
+ 	man1/chfn.1 \
+ 	man1/chsh.1 \
+ 	man1/groups.1 \
+-	man1/login.1 \
+ 	man5/passwd.5 \
+-	man1/su.1 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+ # newgrp.1 must be updated
+diff --git a/man/pl/Makefile.am b/man/pl/Makefile.am
+index aa79af2..df11bf6 100644
+--- a/man/pl/Makefile.am
++++ b/man/pl/Makefile.am
+@@ -6,8 +6,6 @@ man_MANS = \
+ 	man1/chage.1 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+@@ -15,9 +13,6 @@ man_MANS = \
+ 	man8/groupmod.8 \
+ 	man1/groups.1 \
+ 	man8/grpck.8 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+-	man1/sg.1 \
+ 	man8/shadowconfig.8 \
+ 	man3/shadow.3 \
+ 	man8/userdel.8 \
+diff --git a/man/ru/Makefile.am b/man/ru/Makefile.am
+index 84d55d9..42c58b9 100644
+--- a/man/ru/Makefile.am
++++ b/man/ru/Makefile.am
+@@ -8,8 +8,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+@@ -21,10 +19,7 @@ man_MANS = \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+ 	man8/nologin.8 \
+ 	man1/passwd.1 \
+@@ -32,11 +27,8 @@ man_MANS = \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/sv/Makefile.am b/man/sv/Makefile.am
+index 70329ed..5ae9272 100644
+--- a/man/sv/Makefile.am
++++ b/man/sv/Makefile.am
+@@ -5,8 +5,6 @@ man_MANS = \
+ 	man1/chage.1 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+@@ -15,15 +13,10 @@ man_MANS = \
+ 	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man5/gshadow.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+-	man5/suauth.5 \
+ 	man8/userdel.8 \
+ 	man8/vigr.8 \
+ 	man8/vipw.8
+diff --git a/man/tr/Makefile.am b/man/tr/Makefile.am
+index 8d8b916..8b2aa2d 100644
+--- a/man/tr/Makefile.am
++++ b/man/tr/Makefile.am
+@@ -6,11 +6,9 @@ man_MANS = \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+-	man1/login.1 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8
+diff --git a/man/uk/Makefile.am b/man/uk/Makefile.am
+index 3fb5ffb..e5ae706 100644
+--- a/man/uk/Makefile.am
++++ b/man/uk/Makefile.am
+@@ -8,35 +8,25 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmems.8 \
+ 	man8/groupmod.8 \
+-	man1/groups.1 \
+ 	man8/grpck.8 \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/zh_CN/Makefile.am b/man/zh_CN/Makefile.am
+index a8b93a5..96230e4 100644
+--- a/man/zh_CN/Makefile.am
++++ b/man/zh_CN/Makefile.am
+@@ -8,8 +8,6 @@ man_MANS = \
+ 	man8/chpasswd.8 \
+ 	man1/chsh.1 \
+ 	man1/expiry.1 \
+-	man5/faillog.5 \
+-	man8/faillog.8 \
+ 	man3/getspnam.3 \
+ 	man1/gpasswd.1 \
+ 	man8/groupadd.8 \
+@@ -21,22 +19,15 @@ man_MANS = \
+ 	man8/grpconv.8 \
+ 	man8/grpunconv.8 \
+ 	man5/gshadow.5 \
+-	man1/login.1 \
+ 	man5/login.defs.5 \
+-	man8/logoutd.8 \
+-	man1/newgrp.1 \
+ 	man8/newusers.8 \
+-	man8/nologin.8 \
+ 	man1/passwd.1 \
+ 	man5/passwd.5 \
+ 	man8/pwck.8 \
+ 	man8/pwconv.8 \
+ 	man8/pwunconv.8 \
+-	man1/sg.1 \
+ 	man3/shadow.3 \
+ 	man5/shadow.5 \
+-	man1/su.1 \
+-	man5/suauth.5 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8 \
+diff --git a/man/zh_TW/Makefile.am b/man/zh_TW/Makefile.am
+index c36ed2c..6fb6a15 100644
+--- a/man/zh_TW/Makefile.am
++++ b/man/zh_TW/Makefile.am
+@@ -5,12 +5,10 @@ man_MANS = \
+ 	man1/chfn.1 \
+ 	man1/chsh.1 \
+ 	man8/chpasswd.8 \
+-	man1/newgrp.1 \
+ 	man8/groupadd.8 \
+ 	man8/groupdel.8 \
+ 	man8/groupmod.8 \
+ 	man5/passwd.5 \
+-	man1/su.1 \
+ 	man8/useradd.8 \
+ 	man8/userdel.8 \
+ 	man8/usermod.8
+diff --git a/src/Makefile.am b/src/Makefile.am
+index b6cb09e..f517d1e 100644
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -26,8 +26,8 @@ AM_CFLAGS = $(LIBBSD_CFLAGS)
+ # and installation would be much simpler (just two directories,
+ # $prefix/bin and $prefix/sbin, no install-data hacks...)
+ 
+-bin_PROGRAMS   = groups login
+-sbin_PROGRAMS  = nologin
++bin_PROGRAMS   =
++sbin_PROGRAMS  =
+ ubin_PROGRAMS  = faillog chage chfn chsh expiry gpasswd newgrp passwd
+ if ENABLE_SUBIDS
+ ubin_PROGRAMS += newgidmap newuidmap
+@@ -48,7 +48,6 @@ usbin_PROGRAMS = \
+ 	grpck \
+ 	grpconv \
+ 	grpunconv \
+-	logoutd \
+ 	newusers \
+ 	pwck \
+ 	pwconv \
+@@ -59,7 +58,7 @@ usbin_PROGRAMS = \
+ 	vipw
+ 
+ # id and groups are from gnu, sulogin from sysvinit
+-noinst_PROGRAMS = id sulogin
++noinst_PROGRAMS =
+ 
+ suidusbins     =
+ suidbins       =

debian/patches/debian/cppw-Add-tool.patch

@@ -1,287 +0,0 @@
-From: Nicolas FRANCOIS <nicolas.francois@centraliens.net>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: cppw: Add tool
-
----
- po/POTFILES.in  |   1 +
- src/Makefile.am |   2 +
- src/cppw.c      | 238 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 241 insertions(+)
- create mode 100644 src/cppw.c
-
-diff --git a/po/POTFILES.in b/po/POTFILES.in
-index 9ff6100..a60c93e 100644
---- a/po/POTFILES.in
-+++ b/po/POTFILES.in
-@@ -86,6 +86,7 @@ src/chfn.c
- src/chgpasswd.c
- src/chpasswd.c
- src/chsh.c
-+src/cppw.c
- src/expiry.c
- src/faillog.c
- src/gpasswd.c
-diff --git a/src/Makefile.am b/src/Makefile.am
-index b6cb09e..c86ba52 100644
---- a/src/Makefile.am
-+++ b/src/Makefile.am
-@@ -39,6 +39,7 @@ if WITH_SU
- bin_PROGRAMS  += su
- endif
- usbin_PROGRAMS = \
-+	cppw \
- 	chgpasswd \
- 	chpasswd \
- 	groupadd \
-@@ -104,6 +105,7 @@ newuidmap_LDADD    = $(LDADD) $(LIBAUDIT) $(LIBSELINUX) $(LIBCAP) $(LIBECONF) -l
- newgidmap_LDADD    = $(LDADD) $(LIBAUDIT) $(LIBSELINUX) $(LIBCAP) $(LIBECONF) -ldl
- chfn_LDADD     = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT_NOPAM) $(LIBSKEY) $(LIBMD) $(LIBECONF)
- chgpasswd_LDADD = $(LDADD) $(LIBPAM_SUID) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT) $(LIBECONF)
-+cppw_LDADD     = $(LDADD) $(LIBAUDIT) $(LIBSELINUX)
- chsh_LDADD     = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT_NOPAM) $(LIBSKEY) $(LIBMD) $(LIBECONF)
- chpasswd_LDADD = $(LDADD) $(LIBPAM) $(LIBAUDIT) $(LIBSELINUX) $(LIBCRYPT) $(LIBECONF) -ldl
- expiry_LDADD = $(LDADD) $(LIBECONF)
-diff --git a/src/cppw.c b/src/cppw.c
-new file mode 100644
-index 0000000..beb4c36
---- /dev/null
-+++ b/src/cppw.c
-@@ -0,0 +1,238 @@
-+/*
-+  cppw, cpgr  copy with locking given file over the password or group file
-+  with -s will copy with locking given file over shadow or gshadow file
-+
-+  Copyright (C) 1999 Stephen Frost <sfrost@snowman.net>
-+
-+  Based on vipw, vigr by:
-+  Copyright (C) 1997 Guy Maor <maor@ece.utexas.edu>
-+
-+  This program is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+
-+  This program is distributed in the hope that it will be useful, but
-+  WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+  General Public License for more details.
-+
-+  You should have received a copy of the GNU General Public License
-+  along with this program; if not, write to the Free Software
-+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+
-+  */
-+
-+#include <config.h>
-+#include "defines.h"
-+
-+#include <errno.h>
-+#include <sys/stat.h>
-+#include <unistd.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <sys/types.h>
-+#include <signal.h>
-+#include <utime.h>
-+#include "exitcodes.h"
-+#include "prototypes.h"
-+#include "pwio.h"
-+#include "shadowio.h"
-+#include "groupio.h"
-+#include "sgroupio.h"
-+
-+
-+const char *Prog;
-+
-+const char *filename, *filenewname;
-+static bool filelocked = false;
-+static int (*unlock) (void);
-+
-+/* local function prototypes */
-+static int create_copy (FILE *fp, const char *dest, struct stat *sb);
-+static void cppwexit (const char *msg, int syserr, int ret);
-+static void cppwcopy (const char *file,
-+                      const char *in_file,
-+                      int (*file_lock) (void),
-+                      int (*file_unlock) (void));
-+
-+static int create_copy (FILE *fp, const char *dest, struct stat *sb)
-+{
-+	struct utimbuf ub;
-+	FILE *bkfp;
-+	int c;
-+	mode_t mask;
-+
-+	mask = umask (077);
-+	bkfp = fopen (dest, "w");
-+	(void) umask (mask);
-+	if (NULL == bkfp) {
-+		return -1;
-+	}
-+
-+	rewind (fp);
-+	while ((c = getc (fp)) != EOF) {
-+		if (putc (c, bkfp) == EOF) {
-+			break;
-+		}
-+	}
-+
-+	if (   (c != EOF)
-+	    || (fflush (bkfp) != 0)) {
-+		(void) fclose (bkfp);
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+	if (   (fsync (fileno (bkfp)) != 0)
-+	    || (fclose (bkfp) != 0)) {
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+
-+	ub.actime = sb->st_atime;
-+	ub.modtime = sb->st_mtime;
-+	if (   (utime (dest, &ub) != 0)
-+	    || (chmod (dest, sb->st_mode) != 0)
-+	    || (chown (dest, sb->st_uid, sb->st_gid) != 0)) {
-+		(void) unlink (dest);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static void cppwexit (const char *msg, int syserr, int ret)
-+{
-+	int err = errno;
-+	if (filelocked) {
-+		(*unlock) ();
-+	}
-+	if (NULL != msg) {
-+		fprintf (stderr, "%s: %s", Prog, msg);
-+		if (0 != syserr) {
-+			fprintf (stderr, ": %s", strerror (err));
-+		}
-+		(void) fputs ("\n", stderr);
-+	}
-+	if (NULL != filename) {
-+		fprintf (stderr, _("%s: %s is unchanged\n"), Prog, filename);
-+	} else {
-+		fprintf (stderr, _("%s: no changes\n"), Prog);
-+	}
-+
-+	exit (ret);
-+}
-+
-+static void cppwcopy (const char *file,
-+                      const char *in_file,
-+                      int (*file_lock) (void),
-+                      int (*file_unlock) (void))
-+{
-+	struct stat st1;
-+	FILE *f;
-+	char filenew[1024];
-+
-+	snprintf (filenew, sizeof filenew, "%s.new", file);
-+	unlock = file_unlock;
-+	filename = file;
-+	filenewname = filenew;
-+
-+	if (access (file, F_OK) != 0) {
-+		cppwexit (file, 1, 1);
-+	}
-+	if (file_lock () == 0) {
-+		cppwexit (_("Couldn't lock file"), 0, 5);
-+	}
-+	filelocked = true;
-+
-+	/* file to copy has same owners, perm */
-+	if (stat (file, &st1) != 0) {
-+		cppwexit (file, 1, 1);
-+	}
-+	f = fopen (in_file, "r");
-+	if (NULL == f) {
-+		cppwexit (in_file, 1, 1);
-+	}
-+	if (create_copy (f, filenew, &st1) != 0) {
-+		cppwexit (_("Couldn't make copy"), errno, 1);
-+	}
-+
-+	/* XXX - here we should check filenew for errors; if there are any,
-+	 * fail w/ an appropriate error code and let the user manually fix
-+	 * it. Use pwck or grpck to do the check.  - Stephen (Shamelessly
-+	 * stolen from '--marekm's comment) */
-+
-+	if (rename (filenew, file) != 0) {
-+		fprintf (stderr, _("%s: can't copy %s: %s)\n"),
-+                         Prog, filenew, strerror (errno));
-+		cppwexit (NULL,0,1);
-+	}
-+
-+	(*file_unlock) ();
-+}
-+
-+int main (int argc, char **argv)
-+{
-+	int flag;
-+	bool cpshadow = false;
-+	char *in_file;
-+	int e = E_USAGE;
-+	bool do_cppw = true;
-+
-+	(void) setlocale (LC_ALL, "");
-+	(void) bindtextdomain (PACKAGE, LOCALEDIR);
-+	(void) textdomain (PACKAGE);
-+
-+	Prog = Basename (argv[0]);
-+	if (strcmp (Prog, "cpgr") == 0) {
-+		do_cppw = false;
-+	}
-+
-+	while ((flag = getopt (argc, argv, "ghps")) != EOF) {
-+		switch (flag) {
-+		case 'p':
-+			do_cppw = true;
-+			break;
-+		case 'g':
-+			do_cppw = false;
-+			break;
-+		case 's':
-+			cpshadow = true;
-+			break;
-+		case 'h':
-+			e = E_SUCCESS;
-+			/*pass through*/
-+		default:
-+			(void) fputs (_("Usage:\n\
-+`cppw <file>' copys over /etc/passwd   `cppw -s <file>' copys over /etc/shadow\n\
-+`cpgr <file>' copys over /etc/group    `cpgr -s <file>' copys over /etc/gshadow\n\
-+"), (E_SUCCESS != e) ? stderr : stdout);
-+			exit (e);
-+		}
-+	}
-+
-+	if (argc != optind + 1) {
-+		cppwexit (_("wrong number of arguments, -h for usage"),0,1);
-+	}
-+
-+	in_file = argv[optind];
-+
-+	if (do_cppw) {
-+		if (cpshadow) {
-+			cppwcopy (SHADOW_FILE, in_file, spw_lock, spw_unlock);
-+		} else {
-+			cppwcopy (PASSWD_FILE, in_file, pw_lock, pw_unlock);
-+		}
-+	} else {
-+#ifdef SHADOWGRP
-+		if (cpshadow) {
-+			cppwcopy (SGROUP_FILE, in_file, sgr_lock, sgr_unlock);
-+		} else
-+#endif				/* SHADOWGRP */
-+		{
-+			cppwcopy (GROUP_FILE, in_file, gr_lock, gr_unlock);
-+		}
-+	}
-+
-+	return 0;
-+}
-+

debian/patches/debian/cppw-add-selinux-support.patch

@@ -1,63 +0,0 @@
-From: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
-Date: Sat, 22 Jun 2024 17:39:41 +0200
-Subject: cppw: add selinux support
-
-Status wrt upstream: cppw is not available upstream.
-Needs to be reviewed by an SE-Linux aware person.
----
- src/cppw.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/src/cppw.c b/src/cppw.c
-index beb4c36..2cbbbc0 100644
---- a/src/cppw.c
-+++ b/src/cppw.c
-@@ -34,6 +34,9 @@
- #include <sys/types.h>
- #include <signal.h>
- #include <utime.h>
-+#ifdef WITH_SELINUX
-+#include <selinux/selinux.h>
-+#endif				/* WITH_SELINUX */
- #include "exitcodes.h"
- #include "prototypes.h"
- #include "pwio.h"
-@@ -139,6 +142,22 @@ static void cppwcopy (const char *file,
- 	if (access (file, F_OK) != 0) {
- 		cppwexit (file, 1, 1);
- 	}
-+#ifdef WITH_SELINUX
-+	/* if SE Linux is enabled then set the context of all new files
-+	 * to be the context of the file we are editing */
-+	if (is_selinux_enabled () > 0) {
-+		security_context_t passwd_context=NULL;
-+		int ret = 0;
-+		if (getfilecon (file, &passwd_context) < 0) {
-+			cppwexit (_("Couldn't get file context"), errno, 1);
-+		}
-+		ret = setfscreatecon (passwd_context);
-+		freecon (passwd_context);
-+		if (0 != ret) {
-+			cppwexit (_("setfscreatecon () failed"), errno, 1);
-+		}
-+	}
-+#endif				/* WITH_SELINUX */
- 	if (file_lock () == 0) {
- 		cppwexit (_("Couldn't lock file"), 0, 5);
- 	}
-@@ -167,6 +186,15 @@ static void cppwcopy (const char *file,
- 		cppwexit (NULL,0,1);
- 	}
- 
-+#ifdef WITH_SELINUX
-+	/* unset the fscreatecon */
-+	if (is_selinux_enabled () > 0) {
-+		if (setfscreatecon (NULL)) {
-+		cppwexit (_("setfscreatecon() failed"), errno, 1);
-+		}
-+	}
-+#endif				/* WITH_SELINUX */
-+
- 	(*file_unlock) ();
- }
- 

debian/patches/debian/tests-disable-su.patch

@@ -5,14 +5,14 @@ Subject: upstream testsuite: disable su tests
 Debian uses su from util-linux, pointless/impossible to test shadow's su
 here.
 ---
- tests/run_some | 68 ----------------------------------------------------------
+ tests/tests/run_some | 68 ----------------------------------------------------
  1 file changed, 68 deletions(-)
 
-diff --git a/tests/run_some b/tests/run_some
-index c58f59b..46317eb 100755
---- a/tests/run_some
-+++ b/tests/run_some
-@@ -79,74 +79,6 @@ echo "-: test failed"
+diff --git a/tests/tests/run_some b/tests/tests/run_some
+index 91f5626..a1e6e11 100755
+--- a/tests/tests/run_some
++++ b/tests/tests/run_some
+@@ -63,74 +63,6 @@ echo "-: test failed"
  find "${build_path}" -name "*.gcda" -delete
  # ignore the result of the first test.  ~magic~
  run_test ./su/01/su_user.test ignore_failure

debian/patches/debian/tests-libsubid-04_nss-fix-setting-basedir.patch

@@ -3,13 +3,13 @@ Date: Sat, 6 Jul 2024 23:35:51 +0200
 Subject: tests/libsubid/04_nss: fix setting basedir
 
 ---
- tests/libsubid/04_nss/Makefile | 4 ++--
+ tests/tests/libsubid/04_nss/Makefile | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
 
-diff --git a/tests/libsubid/04_nss/Makefile b/tests/libsubid/04_nss/Makefile
-index 7d7ae3e..3fbf989 100644
---- a/tests/libsubid/04_nss/Makefile
-+++ b/tests/libsubid/04_nss/Makefile
+diff --git a/tests/tests/libsubid/04_nss/Makefile b/tests/tests/libsubid/04_nss/Makefile
+index 79c2fc9..bf2699f 100644
+--- a/tests/tests/libsubid/04_nss/Makefile
++++ b/tests/tests/libsubid/04_nss/Makefile
 @@ -1,7 +1,7 @@
  all: test_nss libsubid_zzz.so
  

debian/patches/series

@@ -1,10 +1,12 @@
-debian/cppw-Add-tool.patch
-debian/cppw-add-selinux-support.patch
-debian/Let-pam_unix-handle-login-failure-delays.patch
 debian/Set-group-and-mode-for-g-shadow-files.patch
 debian/Keep-using-Debian-adduser-defaults.patch
 debian/Document-the-shadowconfig-utility.patch
 debian/Recommend-using-adduser-and-deluser.patch
 debian/Relax-usernames-groupnames-checking.patch
+upstream/tests-Support-run_some-from-exported-tarball.patch
 debian/tests-disable-su.patch
 debian/tests-libsubid-04_nss-fix-setting-basedir.patch
+debian/Adapt-login.defs-for-Debian.patch
+debian/Define-LOGIN_NAME_MAX-on-HURD.patch
+debian/Stop-building-programs-we-do-not-install.patch
+upstream/lib-user_busy.c-Include-utmpx.h.patch

debian/patches/upstream/lib-user_busy.c-Include-utmpx.h.patch

@@ -0,0 +1,27 @@
+From: Pino Toscano <toscano.pino@tiscali.it>
+Date: Tue, 10 Sep 2024 14:36:49 +0200
+Subject: [PATCH] lib/user_busy.c: Include <utmpx.h>
+
+Since:
+- utmpx APIs are used in non-Linux code blocks
+- <utmpx.h> is already unconditionally included in Linux parts in other
+  files
+then unconditionally include it in this file as well.
+
+Signed-off-by: Pino Toscano <toscano.pino@tiscali.it>
+---
+ lib/user_busy.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/lib/user_busy.c b/lib/user_busy.c
+index a622376..b559405 100644
+--- a/lib/user_busy.c
++++ b/lib/user_busy.c
+@@ -17,6 +17,7 @@
+ #include <dirent.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#include <utmpx.h>
+ #include "defines.h"
+ #include "prototypes.h"
+ #ifdef ENABLE_SUBIDS

debian/patches/upstream/tests-Support-run_some-from-exported-tarball.patch

@@ -0,0 +1,148 @@
+From: Serge Hallyn <serge@hallyn.com>
+Date: Sat, 25 May 2024 08:40:11 -0500
+Subject: tests/: Support run_some from exported tarball
+
+common/config.sh currently tries to find the top directory by looking
+for .git.  There are also many places under tests/ where we use
+hard-coded ../../.. to find things like ${TOP_DIR}/lib.
+
+We don't actually ship the tests with 'make dist'.  So we will
+be exporting tests/ as a separate tarball.  In particular, I want
+to then import this in the debian package.  However, there it will
+be under shadow.git/debian/tests, not shadow.git/tests.
+
+To support this, accept the environment variable BUILD_BASE_DIR,
+which should point to shadow.git.
+
+An alternative would be to move the tests to their own git
+tree.  However, keeping tests in separate git tree tends to
+lead to repos getting out of sync.  And we'd still need to accept
+something like BUILD_BASE_DIR.
+
+Note there are a lot of tests under run-all, which I'm not converting
+as they currently are not being run in CI, so I'm more likely to
+break something.
+
+Changelog:
+  2024 05 26: Incorporate feedback from alejandro-colomar
+
+Link: <https://salsa.debian.org/debian/shadow/-/merge_requests/21>
+Link: <https://salsa.debian.org/debian/shadow/-/merge_requests/22>
+Cc: Chris Hofstaedtler <zeha@debian.org>
+Signed-off-by: Serge Hallyn <serge@hallyn.com>
+Signed-off-by: Alejandro Colomar <alx@kernel.org>
+---
+ tests/tests/common/config.sh              | 16 +++++++++-------
+ tests/tests/libsubid/04_nss/Makefile      | 13 ++++++++-----
+ tests/tests/libsubid/04_nss/subidnss.test |  2 +-
+ tests/tests/libsubid/04_nss/test_range    | 12 ++++++------
+ 4 files changed, 24 insertions(+), 19 deletions(-)
+
+diff --git a/tests/tests/common/config.sh b/tests/tests/common/config.sh
+index a2f8df0..926cdae 100644
+--- a/tests/tests/common/config.sh
++++ b/tests/tests/common/config.sh
+@@ -2,14 +2,16 @@
+ 
+ set -e
+ 
+-build_path=$(pwd)
+-while [ "${build_path}" != "/" -a ! -e "${build_path}/.git" ]; do
+-	build_path=$(dirname ${build_path})
+-done
+-if [ ! -e "${build_path}/.git" ]; then
+-	echo "Not inside git directory" 1>&2
+-	exit 1
++if [ -n "${BUILD_BASE_DIR}" ]; then
++    build_path="${BUILD_BASE_DIR}"
++else
++    build_path=$(git rev-parse --show-toplevel)
+ fi
++if [ -z "${build_path}" ]; then
++    echo "Failed to find build base path"
++    exit 1
++fi
++export build_path
+ 
+ # Save the configuration files in tmp.
+ save_config ()
+diff --git a/tests/tests/libsubid/04_nss/Makefile b/tests/tests/libsubid/04_nss/Makefile
+index dd5acf7..79c2fc9 100644
+--- a/tests/tests/libsubid/04_nss/Makefile
++++ b/tests/tests/libsubid/04_nss/Makefile
+@@ -1,12 +1,15 @@
+ all: test_nss libsubid_zzz.so
+ 
+-test_nss: test_nss.c ../../../lib/nss.c
+-	gcc -c -I../../../lib/ -I../../.. -o test_nss.o test_nss.c
+-	gcc -o test_nss test_nss.o ../../../lib/.libs/libshadow.a -ldl
++BASE_TEST_DIR ?= $(shell git rev-parse --show-toplevel)
++basedir := $(BASE_TEST_DIR)
++
++test_nss: test_nss.c $(basedir)/lib/nss.c
++	gcc -c -I$(basedir)/lib/ -I$(basedir) -o test_nss.o test_nss.c
++	gcc -o test_nss test_nss.o $(basedir)/lib/.libs/libshadow.a -ldl
+ 
+ libsubid_zzz.so: libsubid_zzz.c
+-	gcc -c -I../../../lib/ -I../../.. -I../../../libsubid libsubid_zzz.c
+-	gcc -L../../../libsubid -shared -o libsubid_zzz.so libsubid_zzz.o ../../../lib/.libs/libshadow.a -ldl
++	gcc -c -I$(basedir)/lib/ -I$(basedir) -I$(basedir)/libsubid libsubid_zzz.c
++	gcc -L$(basedir)/libsubid -shared -o libsubid_zzz.so libsubid_zzz.o $(basedir)/lib/.libs/libshadow.a -ldl
+ 
+ clean:
+ 	rm -f *.o *.so test_nss
+diff --git a/tests/tests/libsubid/04_nss/subidnss.test b/tests/tests/libsubid/04_nss/subidnss.test
+index 3d40dc8..400171f 100755
+--- a/tests/tests/libsubid/04_nss/subidnss.test
++++ b/tests/tests/libsubid/04_nss/subidnss.test
+@@ -9,7 +9,7 @@ cd $(dirname $0)
+ 
+ make
+ 
+-export LD_LIBRARY_PATH=.:../../../lib/.libs:$LD_LIBRARY_PATH
++export LD_LIBRARY_PATH=.:${build_path}/lib/.libs:$LD_LIBRARY_PATH
+ 
+ ./test_nss 1
+ ./test_nss 2
+diff --git a/tests/tests/libsubid/04_nss/test_range b/tests/tests/libsubid/04_nss/test_range
+index ee25080..45a791c 100755
+--- a/tests/tests/libsubid/04_nss/test_range
++++ b/tests/tests/libsubid/04_nss/test_range
+@@ -11,23 +11,23 @@ cleanup1() {
+     umount /etc/nsswitch.conf
+ }
+ trap cleanup1 EXIT HUP INT TERM
+-../../../src/check_subid_range user1 u 100000 65535
++${build_path}/src/check_subid_range user1 u 100000 65535
+ if [ $? -ne 0 ]; then
+     exit 1
+ fi
+-../../../src/check_subid_range user2 u 100000 65535
++${build_path}/src/check_subid_range user2 u 100000 65535
+ if [ $? -eq 0 ]; then
+     exit 1
+ fi
+-../../../src/check_subid_range unknown u 100000 65535
++${build_path}/src/check_subid_range unknown u 100000 65535
+ if [ $? -eq 0 ]; then
+     exit 1
+ fi
+-../../../src/check_subid_range error u 100000 65535
++${build_path}/src/check_subid_range error u 100000 65535
+ if [ $? -eq 0 ]; then
+     exit 1
+ fi
+-../../../src/check_subid_range user1 u 1000 65535
++${build_path}/src/check_subid_range user1 u 1000 65535
+ if [ $? -eq 0 ]; then
+     exit 1
+ fi
+@@ -43,7 +43,7 @@ cleanup2() {
+     umount /etc/nsswitch.conf
+ }
+ trap cleanup2 EXIT HUP INT TERM
+-../../../src/check_subid_range user1 u 100000 65535
++${build_path}/src/check_subid_range user1 u 100000 65535
+ if [ $? -eq 0 ]; then
+     exit 1
+ fi

debian/rules

@@ -4,6 +4,7 @@
 # Enable PIE, BINDNOW, and possible future flags.
 export DEB_BUILD_MAINT_OPTIONS = hardening=+all
 DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/architecture.mk
 include /usr/share/dpkg/buildflags.mk
 include /usr/share/debhelper/dh_package_notes/package-notes.mk
 
@@ -24,9 +25,9 @@ DEB_CONFIGURE_EXTRA_FLAGS := \
 	--without-tcb \
 
 
-ifneq ($(DEB_HOST_ARCH_OS),linux)
-DEB_CONFIGURE_EXTRA_FLAGS += --enable-logind
+ifeq ($(DEB_HOST_ARCH_OS),linux)
 DEB_CONFIGURE_EXTRA_FLAGS += --with-audit
+DEB_CONFIGURE_EXTRA_FLAGS += --with-btrfs
 endif
 
 ifneq ($(filter nodoc,$(DEB_BUILD_PROFILES)),)
@@ -44,26 +45,12 @@ CFLAGS += -DDEFAULT_EDITOR="\"sensible-editor\""
 override_dh_auto_configure:
 	dh_auto_configure -- $(DEB_CONFIGURE_EXTRA_FLAGS)
 
-override_dh_install-arch:
-ifneq ($(DEB_HOST_ARCH_OS),linux)
-	sed -i 's/session    optional   pam_keyinit.so/# Linux only # session    optional   pam_keyinit.so/' debian/login.pam
-endif
-	dh_install -a
-ifeq ($(DEB_HOST_ARCH_OS),hurd)
-	# /bin/login is provided by the hurd package.
-	rm -f debian/login/usr/bin/login
-endif
-
 override_dh_installpam:
 	# Distribute the pam.d files; unless for the commands with disabled PAM
 	# support
-	dh_installpam -p login
 	dh_installpam -p passwd --name=passwd
 	dh_installpam -p passwd --name=chfn
 	dh_installpam -p passwd --name=chsh
 	dh_installpam -p passwd --name=chpasswd
 	dh_installpam -p passwd --name=newusers
 
-override_dh_auto_clean:
-	sed -i 's/# Linux only # //' debian/login.pam
-	dh_auto_clean

debian/salsa-ci.yml

@@ -0,0 +1,40 @@
+---
+include: https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
+
+extract-source:
+  extends: .provisioning-extract-source
+
+variables:
+  RELEASE: 'unstable'
+
+build:
+  extends: .build-package
+
+test-build-any:
+  extends: .test-build-package-any
+
+test-build-all:
+  extends: .test-build-package-all
+
+lintian:
+  extends: .test-lintian
+
+autopkgtest:
+  extends: .test-autopkgtest
+
+blhc:
+  extends: .test-blhc
+
+reprotest:
+  extends: .test-reprotest
+
+variables:
+  SALSA_CI_ENABLE_BUILD_PACKAGE_PROFILES: 1
+
+test-build-profiles:
+  extends: .test-build-package-profiles
+  parallel:
+    matrix:
+      - BUILD_PROFILES: nocheck
+      - BUILD_PROFILES: nodoc
+

debian/shlibs.local

@@ -1 +1 @@
-deb: libsubid 4 libsubid4 (= ${binary:Version})
+deb: libsubid 5 libsubid5 (= ${binary:Version})

debian/source/lintian-overrides

@@ -0,0 +1,6 @@
+# debputy does not need misc:Depends
+debhelper-but-no-misc-depends libsubid-dev
+debhelper-but-no-misc-depends libsubid5
+debhelper-but-no-misc-depends login.defs
+debhelper-but-no-misc-depends passwd
+debhelper-but-no-misc-depends uidmap

doc/Makefile.in

@@ -161,7 +161,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/Makefile.in

@@ -250,7 +250,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/pam.d/Makefile.in

@@ -193,7 +193,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

etc/shadow-maint/Makefile.in

@@ -158,7 +158,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

lib/Makefile.am

@@ -119,7 +119,6 @@ libshadow_la_SOURCES = \
 	pwdcheck.c \
 	pwmem.c \
 	remove_tree.c \
-	rlogin.c \
 	root_flag.c \
 	run_part.h \
 	run_part.c \

lib/Makefile.in

@@ -139,22 +139,21 @@ am__libshadow_la_SOURCES_DIST = addgrps.c adds.c adds.h age.c \
 	pam_pass.c pam_pass_non_interactive.c port.c port.h \
 	prefix_flag.c prototypes.h pwauth.c pwauth.h pwio.c pwio.h \
 	pwd_init.c pwd2spwd.c pwdcheck.c pwmem.c remove_tree.c \
-	rlogin.c root_flag.c run_part.h run_part.c salt.c selinux.c \
-	semanage.c setugid.c setupenv.c sgetgrent.c sgetpwent.c \
-	sgetspent.c sgroupio.c sgroupio.h shadow.c shadowio.c \
-	shadowio.h shadowlog.c shadowlog.h shadowlog_internal.h \
-	shadowmem.c shell.c sizeof.h spawn.c sssd.c sssd.h \
-	string/sprintf.c string/sprintf.h string/stpecpy.c \
-	string/stpecpy.h string/stpeprintf.c string/stpeprintf.h \
-	string/strftime.c string/strftime.h string/strncpy.h \
-	string/strtcpy.c string/strtcpy.h string/zustr2stp.h \
-	strtoday.c sub.c subordinateio.h subordinateio.c sulog.c \
-	time/day_to_str.c time/day_to_str.h ttytype.c tz.c ulimit.c \
-	user_busy.c valid.c write_full.c xgetpwnam.c \
-	xprefix_getpwnam.c xgetpwuid.c xgetgrnam.c xgetgrgid.c \
-	xgetspnam.c yesno.c tcbfuncs.c tcbfuncs.h btrfs.c log.c \
-	logind.c utmp.c freezero.h freezero.c readpassphrase.h \
-	readpassphrase.c
+	root_flag.c run_part.h run_part.c salt.c selinux.c semanage.c \
+	setugid.c setupenv.c sgetgrent.c sgetpwent.c sgetspent.c \
+	sgroupio.c sgroupio.h shadow.c shadowio.c shadowio.h \
+	shadowlog.c shadowlog.h shadowlog_internal.h shadowmem.c \
+	shell.c sizeof.h spawn.c sssd.c sssd.h string/sprintf.c \
+	string/sprintf.h string/stpecpy.c string/stpecpy.h \
+	string/stpeprintf.c string/stpeprintf.h string/strftime.c \
+	string/strftime.h string/strncpy.h string/strtcpy.c \
+	string/strtcpy.h string/zustr2stp.h strtoday.c sub.c \
+	subordinateio.h subordinateio.c sulog.c time/day_to_str.c \
+	time/day_to_str.h ttytype.c tz.c ulimit.c user_busy.c valid.c \
+	write_full.c xgetpwnam.c xprefix_getpwnam.c xgetpwuid.c \
+	xgetgrnam.c xgetgrgid.c xgetspnam.c yesno.c tcbfuncs.c \
+	tcbfuncs.h btrfs.c log.c logind.c utmp.c freezero.h freezero.c \
+	readpassphrase.h readpassphrase.c
 am__dirstamp = $(am__leading_dot)dirstamp
 @WITH_TCB_TRUE@am__objects_1 = libshadow_la-tcbfuncs.lo
 @WITH_BTRFS_TRUE@am__objects_2 = libshadow_la-btrfs.lo
@@ -197,17 +196,16 @@ am_libshadow_la_OBJECTS = libshadow_la-addgrps.lo libshadow_la-adds.lo \
 	libshadow_la-pwio.lo libshadow_la-pwd_init.lo \
 	libshadow_la-pwd2spwd.lo libshadow_la-pwdcheck.lo \
 	libshadow_la-pwmem.lo libshadow_la-remove_tree.lo \
-	libshadow_la-rlogin.lo libshadow_la-root_flag.lo \
-	libshadow_la-run_part.lo libshadow_la-salt.lo \
-	libshadow_la-selinux.lo libshadow_la-semanage.lo \
-	libshadow_la-setugid.lo libshadow_la-setupenv.lo \
-	libshadow_la-sgetgrent.lo libshadow_la-sgetpwent.lo \
-	libshadow_la-sgetspent.lo libshadow_la-sgroupio.lo \
-	libshadow_la-shadow.lo libshadow_la-shadowio.lo \
-	libshadow_la-shadowlog.lo libshadow_la-shadowmem.lo \
-	libshadow_la-shell.lo libshadow_la-spawn.lo \
-	libshadow_la-sssd.lo string/libshadow_la-sprintf.lo \
-	string/libshadow_la-stpecpy.lo \
+	libshadow_la-root_flag.lo libshadow_la-run_part.lo \
+	libshadow_la-salt.lo libshadow_la-selinux.lo \
+	libshadow_la-semanage.lo libshadow_la-setugid.lo \
+	libshadow_la-setupenv.lo libshadow_la-sgetgrent.lo \
+	libshadow_la-sgetpwent.lo libshadow_la-sgetspent.lo \
+	libshadow_la-sgroupio.lo libshadow_la-shadow.lo \
+	libshadow_la-shadowio.lo libshadow_la-shadowlog.lo \
+	libshadow_la-shadowmem.lo libshadow_la-shell.lo \
+	libshadow_la-spawn.lo libshadow_la-sssd.lo \
+	string/libshadow_la-sprintf.lo string/libshadow_la-stpecpy.lo \
 	string/libshadow_la-stpeprintf.lo \
 	string/libshadow_la-strftime.lo string/libshadow_la-strtcpy.lo \
 	libshadow_la-strtoday.lo libshadow_la-sub.lo \
@@ -313,7 +311,6 @@ am__depfiles_remade = ./$(DEPDIR)/libshadow_la-addgrps.Plo \
 	./$(DEPDIR)/libshadow_la-pwmem.Plo \
 	./$(DEPDIR)/libshadow_la-readpassphrase.Plo \
 	./$(DEPDIR)/libshadow_la-remove_tree.Plo \
-	./$(DEPDIR)/libshadow_la-rlogin.Plo \
 	./$(DEPDIR)/libshadow_la-root_flag.Plo \
 	./$(DEPDIR)/libshadow_la-run_part.Plo \
 	./$(DEPDIR)/libshadow_la-salt.Plo \
@@ -449,7 +446,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@
@@ -622,20 +618,20 @@ libshadow_la_SOURCES = addgrps.c adds.c adds.h age.c agetpass.c \
 	nscd.c nscd.h obscure.c pam_defs.h pam_pass.c \
 	pam_pass_non_interactive.c port.c port.h prefix_flag.c \
 	prototypes.h pwauth.c pwauth.h pwio.c pwio.h pwd_init.c \
-	pwd2spwd.c pwdcheck.c pwmem.c remove_tree.c rlogin.c \
-	root_flag.c run_part.h run_part.c salt.c selinux.c semanage.c \
-	setugid.c setupenv.c sgetgrent.c sgetpwent.c sgetspent.c \
-	sgroupio.c sgroupio.h shadow.c shadowio.c shadowio.h \
-	shadowlog.c shadowlog.h shadowlog_internal.h shadowmem.c \
-	shell.c sizeof.h spawn.c sssd.c sssd.h string/sprintf.c \
-	string/sprintf.h string/stpecpy.c string/stpecpy.h \
-	string/stpeprintf.c string/stpeprintf.h string/strftime.c \
-	string/strftime.h string/strncpy.h string/strtcpy.c \
-	string/strtcpy.h string/zustr2stp.h strtoday.c sub.c \
-	subordinateio.h subordinateio.c sulog.c time/day_to_str.c \
-	time/day_to_str.h ttytype.c tz.c ulimit.c user_busy.c valid.c \
-	write_full.c xgetpwnam.c xprefix_getpwnam.c xgetpwuid.c \
-	xgetgrnam.c xgetgrgid.c xgetspnam.c yesno.c $(am__append_2) \
+	pwd2spwd.c pwdcheck.c pwmem.c remove_tree.c root_flag.c \
+	run_part.h run_part.c salt.c selinux.c semanage.c setugid.c \
+	setupenv.c sgetgrent.c sgetpwent.c sgetspent.c sgroupio.c \
+	sgroupio.h shadow.c shadowio.c shadowio.h shadowlog.c \
+	shadowlog.h shadowlog_internal.h shadowmem.c shell.c sizeof.h \
+	spawn.c sssd.c sssd.h string/sprintf.c string/sprintf.h \
+	string/stpecpy.c string/stpecpy.h string/stpeprintf.c \
+	string/stpeprintf.h string/strftime.c string/strftime.h \
+	string/strncpy.h string/strtcpy.c string/strtcpy.h \
+	string/zustr2stp.h strtoday.c sub.c subordinateio.h \
+	subordinateio.c sulog.c time/day_to_str.c time/day_to_str.h \
+	ttytype.c tz.c ulimit.c user_busy.c valid.c write_full.c \
+	xgetpwnam.c xprefix_getpwnam.c xgetpwuid.c xgetgrnam.c \
+	xgetgrgid.c xgetspnam.c yesno.c $(am__append_2) \
 	$(am__append_3) $(am__append_4) $(am__append_5) \
 	$(am__append_6) $(am__append_7)
 
@@ -815,7 +811,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-pwmem.Plo@am__quote@ # am--include-marker
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-readpassphrase.Plo@am__quote@ # am--include-marker
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-remove_tree.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-rlogin.Plo@am__quote@ # am--include-marker
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-root_flag.Plo@am__quote@ # am--include-marker
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-run_part.Plo@am__quote@ # am--include-marker
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libshadow_la-salt.Plo@am__quote@ # am--include-marker
@@ -1370,13 +1365,6 @@ libshadow_la-remove_tree.lo: remove_tree.c
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libshadow_la_CPPFLAGS) $(CPPFLAGS) $(libshadow_la_CFLAGS) $(CFLAGS) -c -o libshadow_la-remove_tree.lo `test -f 'remove_tree.c' || echo '$(srcdir)/'`remove_tree.c
 
-libshadow_la-rlogin.lo: rlogin.c
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libshadow_la_CPPFLAGS) $(CPPFLAGS) $(libshadow_la_CFLAGS) $(CFLAGS) -MT libshadow_la-rlogin.lo -MD -MP -MF $(DEPDIR)/libshadow_la-rlogin.Tpo -c -o libshadow_la-rlogin.lo `test -f 'rlogin.c' || echo '$(srcdir)/'`rlogin.c
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libshadow_la-rlogin.Tpo $(DEPDIR)/libshadow_la-rlogin.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='rlogin.c' object='libshadow_la-rlogin.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libshadow_la_CPPFLAGS) $(CPPFLAGS) $(libshadow_la_CFLAGS) $(CFLAGS) -c -o libshadow_la-rlogin.lo `test -f 'rlogin.c' || echo '$(srcdir)/'`rlogin.c
-
 libshadow_la-root_flag.lo: root_flag.c
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libshadow_la_CPPFLAGS) $(CPPFLAGS) $(libshadow_la_CFLAGS) $(CFLAGS) -MT libshadow_la-root_flag.lo -MD -MP -MF $(DEPDIR)/libshadow_la-root_flag.Tpo -c -o libshadow_la-root_flag.lo `test -f 'root_flag.c' || echo '$(srcdir)/'`root_flag.c
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libshadow_la-root_flag.Tpo $(DEPDIR)/libshadow_la-root_flag.Plo
@@ -1925,7 +1913,6 @@ distclean: distclean-am
 	-rm -f ./$(DEPDIR)/libshadow_la-pwmem.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-readpassphrase.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-remove_tree.Plo
-	-rm -f ./$(DEPDIR)/libshadow_la-rlogin.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-root_flag.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-run_part.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-salt.Plo
@@ -2087,7 +2074,6 @@ maintainer-clean: maintainer-clean-am
 	-rm -f ./$(DEPDIR)/libshadow_la-pwmem.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-readpassphrase.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-remove_tree.Plo
-	-rm -f ./$(DEPDIR)/libshadow_la-rlogin.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-root_flag.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-run_part.Plo
 	-rm -f ./$(DEPDIR)/libshadow_la-salt.Plo

lib/csrand.c

@@ -23,7 +23,6 @@
 #include "sizeof.h"
 
 
-static uint32_t csrand32(void);
 static uint32_t csrand_uniform32(uint32_t n);
 static unsigned long csrand_uniform_slow(unsigned long n);
 
@@ -98,13 +97,6 @@ csrand_interval(unsigned long min, unsigned long max)
 }
 
 
-static uint32_t
-csrand32(void)
-{
-	return csrand();
-}
-
-
 /*
  * Fast Random Integer Generation in an Interval
  * ACM Transactions on Modeling and Computer Simulation 29 (1), 2019
@@ -117,12 +109,12 @@ csrand_uniform32(uint32_t n)
 	uint64_t  r, mult;
 
 	if (n == 0)
-		return csrand32();
+		return csrand();
 
 	bound = -n % n;  // analogous to `2^32 % n`, since `x % y == (x-y) % y`
 
 	do {
-		r = csrand32();
+		r = csrand();
 		mult = r * n;
 		rem = mult;  // analogous to `mult % 2^32`
 	} while (rem < bound);  // p = (2^32 % n) / 2^32;  W.C.: n=2^31+1, p=0.5

lib/nss.c

@@ -131,6 +131,11 @@ void nss_init(const char *nsswitch_path) {
 		fprintf(shadow_logfd, "%s did not provide @find_subid_owners@\n", libname);
 		goto close_lib;
 	}
+	subid_nss->free = dlsym(h, "shadow_subid_free");
+	if (!subid_nss->free) {
+		fprintf(shadow_logfd, "%s did not provide @subid_free@\n", libname);
+		goto close_lib;
+	}
 	subid_nss->handle = h;
 	goto done;
 

lib/prototypes.h

@@ -284,6 +284,19 @@ struct subid_nss_ops {
 	 */
 	enum subid_status (*find_subid_owners)(unsigned long id, enum subid_type id_type, uid_t **uids, int *count);
 
+	/*
+	 * nss_free: free a memory block allocated by a subid plugin.
+	 *
+	 * @ptr - a pointer to a memory block to deallocate
+	 *
+	 * Some routines of subid_nss_ops allocate memory which should be freed by
+	 * caller after use. In order to deallocate that memory block, one should
+	 * use this routine to release that memory. By default, this function
+	 * pointer is set to free(3) for backward compatibility. However, it is
+	 * strongly recommended to define this routine explicitly.
+	 */
+	void (*free)(void *ptr);
+
 	/* The dlsym handle to close */
 	void *handle;
 };
@@ -356,10 +369,6 @@ unsigned long csrand_interval (unsigned long min, unsigned long max);
 /* remove_tree.c */
 extern int remove_tree (const char *root, bool remove_root);
 
-/* rlogin.c */
-extern int do_rlogin(const char *remote_host, char *name, size_t namesize,
-                     char *term, size_t termsize);
-
 /* root_flag.c */
 extern void process_root_flag (const char* short_opt, int argc, char **argv);
 

lib/rlogin.c

@@ -1,135 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 1989 - 1994, Julianne Frances Haugh
- * SPDX-FileCopyrightText: 1996 - 1999, Marek Michałkiewicz
- * SPDX-FileCopyrightText: 2003 - 2005, Tomasz Kłoczko
- * SPDX-FileCopyrightText: 2007 - 2008, Nicolas François
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <config.h>
-
-#ifdef RLOGIN
-
-#ident "$Id$"
-
-#include "prototypes.h"
-#include "defines.h"
-#include <stdio.h>
-#include <pwd.h>
-#include <netdb.h>
-
-#include "atoi/str2i.h"
-
-
-static struct {
-	int spd_name;
-	int spd_baud;
-} speed_table[] =
-{
-	{ B50, 50},
-	{ B75, 75},
-	{ B110, 110},
-	{ B134, 134},
-	{ B150, 150},
-	{ B200, 200},
-	{ B300, 300},
-	{ B600, 600},
-	{ B1200, 1200},
-	{ B1800, 1800},
-	{ B2400, 2400},
-	{ B4800, 4800},
-	{ B9600, 9600},
-	{ B19200, 19200},
-	{ B38400, 38400},
-	{ -1, -1}
-};
-
-
-static void
-get_remote_string(char *buf, size_t size)
-{
-	for (;;) {
-		if (read (0, buf, 1) != 1) {
-			exit (EXIT_FAILURE);
-		}
-		if ('\0' == *buf) {
-			return;
-		}
-		--size;
-		if (size > 0) {
-			++buf;
-		}
-	}
-	/*NOTREACHED*/
-}
-
-
-int
-do_rlogin(const char *remote_host, char *name, size_t namesize, char *term,
-          size_t termsize)
-{
-	struct passwd *pwd;
-	char remote_name[32];
-	char *cp;
-	unsigned long remote_speed = 9600;
-	int speed_name = B9600;
-	int i;
-	TERMIO termio;
-
-	get_remote_string(remote_name, sizeof(remote_name));
-	get_remote_string(name, namesize);
-	get_remote_string(term, termsize);
-
-	cp = strchr (term, '/');
-	if (NULL != cp) {
-		*cp = '\0';
-		cp++;
-
-		if (str2ul(&remote_speed, cp) == -1)
-			remote_speed = 9600;
-	}
-	for (i = 0;
-	     (   (speed_table[i].spd_baud != remote_speed)
-	      && (speed_table[i].spd_name != -1));
-	     i++);
-
-	if (-1 != speed_table[i].spd_name) {
-		speed_name = speed_table[i].spd_name;
-	}
-
-	/*
-	 * Put the terminal in cooked mode with echo turned on.
-	 */
-
-	GTTY (0, &termio);
-	termio.c_iflag |= ICRNL | IXON;
-	termio.c_oflag |= OPOST | ONLCR;
-	termio.c_lflag |= ICANON | ECHO | ECHOE;
-#ifdef CBAUD
-	termio.c_cflag = (termio.c_cflag & ~CBAUD) | speed_name;
-#else
-	termio.c_cflag = (termio.c_cflag) | speed_name;
-#endif
-	STTY (0, &termio);
-
-	pwd = getpwnam (name); /* local, no need for xgetpwnam */
-	if (NULL == pwd) {
-		return 0;
-	}
-
-	/*
-	 * ruserok() returns 0 for success on modern systems, and 1 on
-	 * older ones.  If you are having trouble with people logging
-	 * in without giving a required password, THIS is the culprit -
-	 * go fix the #define in config.h.
-	 */
-
-#ifndef	RUSEROK
-	return 0;
-#else
-	return ruserok (remote_host, pwd->pw_uid == 0,
-			remote_name, name) == RUSEROK;
-#endif
-}
-#endif				/* RLOGIN */

lib/subordinateio.c

@@ -274,8 +274,40 @@ static const struct subordinate_range *find_range(struct commonio_db *db,
 	return NULL;
 }
 
+/*
+ * have_range: check whether @owner is authorized to use the range
+ *             (@start .. @start+@count-1).
+ * @db: database to check
+ * @owner: owning uid being queried
+ * @start: start of range
+ * @count: number of uids in range
+ *
+ * Returns true if @owner is authorized to use the range, false otherwise.
+ */
 static bool have_range(struct commonio_db *db,
-		       const char *owner, unsigned long start, unsigned long count);
+		       const char *owner, unsigned long start, unsigned long count)
+{
+	const struct subordinate_range *range;
+	unsigned long end;
+
+	if (count == 0)
+		return false;
+
+	end = start + count - 1;
+	range = find_range (db, owner, start);
+	while (range) {
+		unsigned long last;
+
+		last = range->start + range->count - 1;
+		if (last >= (start + count - 1))
+			return true;
+
+		count = end - last;
+		start = last + 1;
+		range = find_range(db, owner, start);
+	}
+	return false;
+}
 
 static bool append_range(struct subid_range **ranges, const struct subordinate_range *new, int n)
 {
@@ -542,64 +574,6 @@ static struct commonio_db subordinate_uid_db = {
 	false			/* setname */
 };
 
-/*
- * have_range: check whether @owner is authorized to use the range
- *             (@start .. @start+@count-1).
- * @db: database to check
- * @owner: owning uid being queried
- * @start: start of range
- * @count: number of uids in range
- *
- * Returns true if @owner is authorized to use the range, false otherwise.
- */
-static bool have_range(struct commonio_db *db,
-		       const char *owner, unsigned long start, unsigned long count)
-{
-	const struct subordinate_range *range;
-	unsigned long end;
-	bool doclose = false;
-	bool ret = false;
-	int rc;
-
-	if (count == 0)
-		return false;
-
-	if (!db->isopen) {
-		doclose = true;
-		if (db == &subordinate_uid_db)
-			rc = sub_uid_open(O_RDONLY);
-		else
-			rc = sub_gid_open(O_RDONLY);
-		if (rc < 0)
-			return false;
-	}
-
-	end = start + count - 1;
-	range = find_range (db, owner, start);
-	while (range) {
-		unsigned long last;
-
-		last = range->start + range->count - 1;
-		if (last >= (start + count - 1)) {
-			ret = true;
-			break;
-		}
-
-		count = end - last;
-		start = last + 1;
-		range = find_range(db, owner, start);
-	}
-
-	if (doclose) {
-		if (db == &subordinate_uid_db)
-			sub_uid_close();
-		else
-			sub_gid_close();
-	}
-
-	return ret;
-}
-
 int sub_uid_setdbname (const char *filename)
 {
 	return commonio_setname (&subordinate_uid_db, filename);
@@ -1143,6 +1117,16 @@ bool release_subid_range(struct subordinate_range *range, enum subid_type id_typ
 	return ret;
 }
 
+void free_subid_pointer(void *ptr)
+{
+	struct subid_nss_ops *h = get_subid_nss_handle();
+	if (h) {
+		h->free(ptr);
+	} else {
+		free(ptr);
+	}
+}
+
 #else				/* !ENABLE_SUBIDS */
 extern int ISO_C_forbids_an_empty_translation_unit;
 #endif				/* !ENABLE_SUBIDS */

lib/subordinateio.h

@@ -43,6 +43,9 @@ extern int sub_gid_unlock (void);
 extern int sub_gid_add (const char *owner, gid_t start, unsigned long count);
 extern int sub_gid_remove (const char *owner, gid_t start, unsigned long count);
 extern uid_t sub_gid_find_free_range(gid_t min, gid_t max, unsigned long count);
+
+extern void free_subid_pointer(void *ptr);
+
 #endif				/* ENABLE_SUBIDS */
 
 #endif

libsubid/Makefile.in

@@ -249,7 +249,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

libsubid/api.c

@@ -42,6 +42,11 @@ bool subid_init(const char *progname, FILE * logfd)
 	return true;
 }
 
+void subid_free(void *ptr)
+{
+	free_subid_pointer(ptr);
+}
+
 static
 int get_subid_ranges(const char *owner, enum subid_type id_type, struct subid_range **ranges)
 {

libsubid/subid.h

@@ -4,8 +4,8 @@
 
 #ifndef SUBID_RANGE_DEFINED
 #define SUBID_RANGE_DEFINED 1
-#define SUBID_ABI_VERSION 4.0.0
-#define SUBID_ABI_MAJOR 4
+#define SUBID_ABI_VERSION 5.0.0
+#define SUBID_ABI_MAJOR 5
 #define SUBID_ABI_MINOR 0
 #define SUBID_ABI_MICRO 0
 
@@ -55,6 +55,19 @@ extern "C" {
  */
 bool subid_init(const char *progname, FILE *logfd);
 
+/*
+ * subid_free: free memory allocated in any subid_* function
+ *
+ * @ptr: Pointer to a memory block to release.
+ *
+ * Some functions like @subid_get_uid_ranges allocate memory internally. As
+ * soon as a result is no longer needed, it should be freed with this routine.
+ * Initially, default function `free()` was used. Thus for backward
+ * compatibility this function falls back to `free()` if a plugin does not
+ * explicitly specify routine to free allocated memory.
+ */
+void subid_free(void *ptr);
+
 /*
  * subid_get_uid_ranges: return a list of UID ranges for a user
  *

libsubid/subid.h.in

@@ -55,6 +55,19 @@ extern "C" {
  */
 bool subid_init(const char *progname, FILE *logfd);
 
+/*
+ * subid_free: free memory allocated in any subid_* function
+ *
+ * @ptr: Pointer to a memory block to release.
+ *
+ * Some functions like @subid_get_uid_ranges allocate memory internally. As
+ * soon as a result is no longer needed, it should be freed with this routine.
+ * Initially, default function `free()` was used. Thus for backward
+ * compatibility this function falls back to `free()` if a plugin does not
+ * explicitly specify routine to free allocated memory.
+ */
+void subid_free(void *ptr);
+
 /*
  * subid_get_uid_ranges: return a list of UID ranges for a user
  *

m4/libtool.m4

@@ -1,7 +1,6 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
-#   Copyright (C) 1996-2001, 2003-2019, 2021-2022 Free Software
-#   Foundation, Inc.
+#   Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -32,7 +31,7 @@ m4_define([_LT_COPYING], [dnl
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ])
 
-# serial 59 LT_INIT
+# serial 58 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -182,7 +181,6 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
 m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_DECL_FILECMD])dnl
 m4_require([_LT_CHECK_MAGIC_METHOD])dnl
 m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
@@ -221,8 +219,8 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a '.a' archive for static linking (except MSVC and
-# ICC, which need '.lib').
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
 libext=a
 
 with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -779,7 +777,7 @@ _LT_EOF
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  $SED '$q' "$ltmain" >> "$cfgfile" \
+  sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
    mv -f "$cfgfile" "$ofile" ||
@@ -1043,8 +1041,8 @@ int forced_loaded() { return 2;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cr libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cr libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
       echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
       $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
       cat > conftest.c << _LT_EOF
@@ -1068,12 +1066,17 @@ _LT_EOF
       _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-    darwin*)
-      case $MACOSX_DEPLOYMENT_TARGET,$host in
-        10.[[012]],*|,*powerpc*-darwin[[5-8]]*)
-          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-        *)
-          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[912]]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]][[,.]]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*|11.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -1122,12 +1125,12 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
     output_verbose_link_cmd=func_echo_all
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
-    _LT_TAGVAR(module_expsym_cmds, $1)="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
     m4_if([$1], [CXX],
 [   if test yes != "$lt_cv_apple_cc_single_mod"; then
       _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 ],[])
   else
@@ -1241,8 +1244,7 @@ _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
 # _LT_WITH_SYSROOT
 # ----------------
 AC_DEFUN([_LT_WITH_SYSROOT],
-[m4_require([_LT_DECL_SED])dnl
-AC_MSG_CHECKING([for sysroot])
+[AC_MSG_CHECKING([for sysroot])
 AC_ARG_WITH([sysroot],
 [AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
   [Search for dependent libraries within DIR (or the compiler's sysroot
@@ -1259,7 +1261,7 @@ case $with_sysroot in #(
    fi
    ;; #(
  /*)
-   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
    ;; #(
  no|'')
    ;; #(
@@ -1289,7 +1291,7 @@ ia64-*-hpux*)
   # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE=32
 	;;
@@ -1306,7 +1308,7 @@ ia64-*-hpux*)
   echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test yes = "$lt_cv_prog_gnu_ld"; then
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
 	  ;;
@@ -1318,7 +1320,7 @@ ia64-*-hpux*)
 	;;
       esac
     else
-      case `$FILECMD conftest.$ac_objext` in
+      case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -32"
 	  ;;
@@ -1340,7 +1342,7 @@ mips64*-*linux*)
   echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     emul=elf
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *32-bit*)
 	emul="${emul}32"
 	;;
@@ -1348,7 +1350,7 @@ mips64*-*linux*)
 	emul="${emul}64"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *MSB*)
 	emul="${emul}btsmip"
 	;;
@@ -1356,7 +1358,7 @@ mips64*-*linux*)
 	emul="${emul}ltsmip"
 	;;
     esac
-    case `$FILECMD conftest.$ac_objext` in
+    case `/usr/bin/file conftest.$ac_objext` in
       *N32*)
 	emul="${emul}n32"
 	;;
@@ -1376,14 +1378,14 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
       *32-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    case `$FILECMD conftest.o` in
+	    case `/usr/bin/file conftest.o` in
 	      *x86-64*)
 		LD="${LD-ld} -m elf32_x86_64"
 		;;
@@ -1451,7 +1453,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case `$FILECMD conftest.o` in
+    case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*)
@@ -1490,22 +1492,9 @@ need_locks=$enable_libtool_lock
 m4_defun([_LT_PROG_AR],
 [AC_CHECK_TOOLS(AR, [ar], false)
 : ${AR=ar}
+: ${AR_FLAGS=cr}
 _LT_DECL([], [AR], [1], [The archiver])
-
-# Use ARFLAGS variable as AR's operation code to sync the variable naming with
-# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
-# higher priority because thats what people were doing historically (setting
-# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
-# variable obsoleted/removed.
-
-test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
-lt_ar_flags=$AR_FLAGS
-_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)])
-
-# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
-# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
-_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}],
-         [Flags to create an archive])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
 
 AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
   [lt_cv_ar_at_file=no
@@ -1724,7 +1713,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1767,7 +1756,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[[	 ]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -2217,35 +2206,26 @@ m4_defun([_LT_CMD_STRIPLIB],
 striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -z "$STRIP"; then
-  AC_MSG_RESULT([no])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
 else
-  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-    old_striplib="$STRIP --strip-debug"
-    striplib="$STRIP --strip-unneeded"
-    AC_MSG_RESULT([yes])
-  else
-    case $host_os in
-    darwin*)
-      # FIXME - insert some real tests, host_os isn't really good enough
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       AC_MSG_RESULT([yes])
-      ;;
-    freebsd*)
-      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
-        old_striplib="$STRIP --strip-debug"
-        striplib="$STRIP --strip-unneeded"
-        AC_MSG_RESULT([yes])
-      else
-        AC_MSG_RESULT([no])
-      fi
-      ;;
-    *)
+    else
       AC_MSG_RESULT([no])
-      ;;
-    esac
-  fi
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
 fi
 _LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
 _LT_DECL([], [striplib], [1])
@@ -2568,7 +2548,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
 m4_if([$1], [],[
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
       ;;
@@ -2578,14 +2558,14 @@ m4_if([$1], [],[
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
     ;;
 
-  *,cl* | *,icl*)
-    # Native MSVC or ICC
+  *,cl*)
+    # Native MSVC
     libname_spec='$name'
     soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
     library_names_spec='$libname.dll.lib'
@@ -2604,7 +2584,7 @@ m4_if([$1], [],[
       done
       IFS=$lt_save_ifs
       # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
       ;;
     cygwin*)
       # Convert to unix form, then to dos form, then back to unix form
@@ -2641,7 +2621,7 @@ m4_if([$1], [],[
     ;;
 
   *)
-    # Assume MSVC and ICC wrapper
+    # Assume MSVC wrapper
     library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
@@ -2674,7 +2654,7 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
   if test -x /usr/bin/objformat; then
@@ -3485,7 +3465,7 @@ beos*)
 
 bsdi[[45]]*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='$FILECMD -L'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
@@ -3519,14 +3499,14 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly* | midnightbsd*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=$FILECMD
+      lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
     esac
@@ -3540,7 +3520,7 @@ haiku*)
   ;;
 
 hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
@@ -3587,7 +3567,7 @@ netbsd* | netbsdelf*-gnu)
 
 newos6*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
@@ -3714,13 +3694,13 @@ else
 	mingw*) lt_bad_file=conftest.nm/nofile ;;
 	*) lt_bad_file=/dev/null ;;
 	esac
-	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
 	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
 	  break 2
 	  ;;
 	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
 	    break 2
@@ -3746,7 +3726,7 @@ else
     # Let the user override the test.
   else
     AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
       DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
@@ -3986,7 +3966,7 @@ esac
 
 if test "$lt_cv_nm_interface" = "MS dumpbin"; then
   # Gets list of data symbols to import.
-  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
   # Adjust the below global symbol transforms to fixup imported variables.
   lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
   lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
@@ -4004,20 +3984,20 @@ fi
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
 $lt_cdecl_hook\
 " -e 's/^T .* \(.*\)$/extern int \1();/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
 $lt_c_name_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
 
 # Transform an extracted symbol line into symbol name with lib prefix and
 # symbol address.
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
 $lt_c_name_lib_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
@@ -4041,7 +4021,7 @@ for ac_symprfx in "" "_"; do
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
     # Fake it for dumpbin and say T for any non-static function,
     # D for any global variable and I for any imported variable.
-    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
+    # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK ['"\
 "     {last_section=section; section=\$ 3};"\
@@ -4059,9 +4039,9 @@ for ac_symprfx in "" "_"; do
 "     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx]"
   else
-    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -4349,7 +4329,7 @@ m4_if([$1], [CXX], [
 	    ;;
 	esac
 	;;
-      freebsd* | dragonfly* | midnightbsd*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -4432,7 +4412,7 @@ m4_if([$1], [CXX], [
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	    ;;
 	  *)
-	    case `$CC -V 2>&1 | $SED 5q` in
+	    case `$CC -V 2>&1 | sed 5q` in
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4774,7 +4754,7 @@ m4_if([$1], [CXX], [
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4957,7 +4937,7 @@ m4_if([$1], [CXX], [
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
@@ -4965,7 +4945,7 @@ m4_if([$1], [CXX], [
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
-    cl* | icl*)
+    cl*)
       _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
       ;;
     *)
@@ -5025,15 +5005,15 @@ dnl Note also adjust exclude_expsyms for C++ above.
 
   case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++ or Intel C++ Compiler.
+    # Microsoft Visual C++.
     if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
   interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
   openbsd* | bitrig*)
@@ -5088,7 +5068,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
       _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v | $SED -e 's/([[^)]]\+)\s\+//' 2>&1` in
+    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -5200,7 +5180,6 @@ _LT_EOF
 	emximp -o $lib $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='@'
       ;;
 
     interix[[3-9]]*)
@@ -5215,7 +5194,7 @@ _LT_EOF
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -5258,7 +5237,7 @@ _LT_EOF
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  ;;
 	esac
-	case `$CC -V 2>&1 | $SED 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
@@ -5270,14 +5249,13 @@ _LT_EOF
 
         if test yes = "$supports_anon_versioning"; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
             echo "local: *; };" >> $output_objdir/$libname.ver~
             $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
 	tcc*)
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
 	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
@@ -5287,7 +5265,7 @@ _LT_EOF
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test yes = "$supports_anon_versioning"; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
               echo "local: *; };" >> $output_objdir/$libname.ver~
               $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
@@ -5419,7 +5397,7 @@ _LT_EOF
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -5602,12 +5580,12 @@ _LT_EOF
 
     cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++ or Intel C++ Compiler.
+      # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       case $cc_basename in
-      cl* | icl*)
-	# Native MSVC or ICC
+      cl*)
+	# Native MSVC
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	_LT_TAGVAR(always_export_symbols, $1)=yes
@@ -5648,7 +5626,7 @@ _LT_EOF
           fi'
 	;;
       *)
-	# Assume MSVC and ICC wrapper
+	# Assume MSVC wrapper
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Tell ltmain to make .lib files, not .a files.
@@ -5696,7 +5674,7 @@ _LT_EOF
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly* | midnightbsd*)
+    freebsd* | dragonfly*)
       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
@@ -5837,7 +5815,6 @@ _LT_EOF
 	# Fabrice Bellard et al's Tiny C Compiler
 	_LT_TAGVAR(ld_shlibs, $1)=yes
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	;;
       esac
       ;;
@@ -5909,7 +5886,6 @@ _LT_EOF
 	emximp -o $lib $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='@'
       ;;
 
     osf3*)
@@ -6680,8 +6656,8 @@ if test yes != "$_lt_caught_CXX_error"; then
 
       cygwin* | mingw* | pw32* | cegcc*)
 	case $GXX,$cc_basename in
-	,cl* | no,cl* | ,icl* | no,icl*)
-	  # Native MSVC or ICC
+	,cl* | no,cl*)
+	  # Native MSVC
 	  # hardcode_libdir_flag_spec is actually meaningless, as there is
 	  # no search path for DLLs.
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
@@ -6779,7 +6755,6 @@ if test yes != "$_lt_caught_CXX_error"; then
 	  emximp -o $lib $output_objdir/$libname.def'
 	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
 	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	_LT_TAGVAR(file_list_spec, $1)='@'
 	;;
 
       dgux*)
@@ -6810,7 +6785,7 @@ if test yes != "$_lt_caught_CXX_error"; then
         _LT_TAGVAR(archive_cmds_need_lc, $1)=no
         ;;
 
-      freebsd* | dragonfly* | midnightbsd*)
+      freebsd* | dragonfly*)
         # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
         # conventions
         _LT_TAGVAR(ld_shlibs, $1)=yes
@@ -6947,7 +6922,7 @@ if test yes != "$_lt_caught_CXX_error"; then
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
@@ -7087,13 +7062,13 @@ if test yes != "$_lt_caught_CXX_error"; then
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	    if test yes = "$supports_anon_versioning"; then
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-                cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
                 echo "local: *; };" >> $output_objdir/$libname.ver~
                 $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
-	    case `$CC -V 2>&1 | $SED 5q` in
+	    case `$CC -V 2>&1 | sed 5q` in
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -8239,14 +8214,6 @@ _LT_DECL([], [DLLTOOL], [1], [DLL creation program])
 AC_SUBST([DLLTOOL])
 ])
 
-# _LT_DECL_FILECMD
-# ----------------
-# Check for a file(cmd) program that can be used to detect file type and magic
-m4_defun([_LT_DECL_FILECMD],
-[AC_CHECK_TOOL([FILECMD], [file], [:])
-_LT_DECL([], [FILECMD], [1], [A file(cmd) program that detects file types])
-])# _LD_DECL_FILECMD
-
 # _LT_DECL_SED
 # ------------
 # Check for a fully-functional sed program, that truncates

m4/ltoptions.m4

@@ -1,7 +1,7 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004-2005, 2007-2009, 2011-2019, 2021-2022 Free
-#   Software Foundation, Inc.
+#   Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives

m4/ltsugar.m4

@@ -1,6 +1,6 @@
 # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-# Copyright (C) 2004-2005, 2007-2008, 2011-2019, 2021-2022 Free Software
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
 # Foundation, Inc.
 # Written by Gary V. Vaughan, 2004
 #

m4/ltversion.m4

@@ -1,7 +1,6 @@
 # ltversion.m4 -- version numbers			-*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2011-2019, 2021-2022 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004
 #
 # This file is free software; the Free Software Foundation gives
@@ -10,15 +9,15 @@
 
 # @configure_input@
 
-# serial 4245 ltversion.m4
+# serial 4179 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.4.7])
-m4_define([LT_PACKAGE_REVISION], [2.4.7])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.7'
-macro_revision='2.4.7'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])

m4/lt~obsolete.m4

@@ -1,7 +1,7 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004-2005, 2007, 2009, 2011-2019, 2021-2022 Free
-#   Software Foundation, Inc.
+#   Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives

man/Makefile.in

@@ -260,7 +260,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

man/config.xml

@@ -1,2 +1,2 @@
 <!ENTITY GROUP_NAME_MAX_LENGTH '32'>
-<!ENTITY SHADOW_UTILS_VERSION '4.15.3'>
+<!ENTITY SHADOW_UTILS_VERSION '4.16.0'>

man/cs/Makefile.in

@@ -193,7 +193,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

man/da/Makefile.in

@@ -195,7 +195,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

man/da/man1/chfn.1

@@ -2,12 +2,12 @@
 .\"     Title: chfn
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "CHFN" "1" "28/06/2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "CHFN" "1" "18/06/2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man1/groups.1

@@ -2,12 +2,12 @@
 .\"     Title: groups
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "GROUPS" "1" "28/06/2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "GROUPS" "1" "18/06/2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man1/id.1

@@ -2,12 +2,12 @@
 .\"     Title: id
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "ID" "1" "28/06/2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "ID" "1" "18/06/2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man1/newgrp.1

@@ -2,12 +2,12 @@
 .\"     Title: newgrp
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "NEWGRP" "1" "28/06/2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "NEWGRP" "1" "18/06/2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man1/sg.1

@@ -2,12 +2,12 @@
 .\"     Title: sg
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "SG" "1" "28/06/2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "SG" "1" "18/06/2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man5/gshadow.5

@@ -2,12 +2,12 @@
 .\"     Title: gshadow
 .\"    Author: Nicolas Fran\(,cois <nicolas.francois@centraliens.net>
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: File Formats and Configuration Files
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "GSHADOW" "5" "28/06/2024" "shadow\-utils 4\&.15\&.3" "File Formats and Configuration"
+.TH "GSHADOW" "5" "18/06/2024" "shadow\-utils 4\&.16\&.0" "File Formats and Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man8/groupdel.8

@@ -2,12 +2,12 @@
 .\"     Title: groupdel
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: System Management Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "GROUPDEL" "8" "28/06/2024" "shadow\-utils 4\&.15\&.3" "System Management Commands"
+.TH "GROUPDEL" "8" "18/06/2024" "shadow\-utils 4\&.16\&.0" "System Management Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man8/logoutd.8

@@ -2,12 +2,12 @@
 .\"     Title: logoutd
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: System Management Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "LOGOUTD" "8" "28/06/2024" "shadow\-utils 4\&.15\&.3" "System Management Commands"
+.TH "LOGOUTD" "8" "18/06/2024" "shadow\-utils 4\&.16\&.0" "System Management Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man8/nologin.8

@@ -2,12 +2,12 @@
 .\"     Title: nologin
 .\"    Author: Nicolas Fran\(,cois <nicolas.francois@centraliens.net>
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: System Management Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "NOLOGIN" "8" "28/06/2024" "shadow\-utils 4\&.15\&.3" "System Management Commands"
+.TH "NOLOGIN" "8" "18/06/2024" "shadow\-utils 4\&.16\&.0" "System Management Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/da/man8/vipw.8

@@ -2,12 +2,12 @@
 .\"     Title: vipw
 .\"    Author: Marek Micha\(/lkiewicz
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28/06/2024
+.\"      Date: 18/06/2024
 .\"    Manual: System Management Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: Danish
 .\"
-.TH "VIPW" "8" "28/06/2024" "shadow\-utils 4\&.15\&.3" "System Management Commands"
+.TH "VIPW" "8" "18/06/2024" "shadow\-utils 4\&.16\&.0" "System Management Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/Makefile.in

@@ -197,7 +197,6 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-FILECMD = @FILECMD@
 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 GMSGFMT = @GMSGFMT@
 GMSGFMT_015 = @GMSGFMT_015@

man/de/man1/chage.1

@@ -2,12 +2,12 @@
 .\"     Title: chage
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "CHAGE" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "CHAGE" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/chfn.1

@@ -2,12 +2,12 @@
 .\"     Title: chfn
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "CHFN" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "CHFN" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/chsh.1

@@ -2,12 +2,12 @@
 .\"     Title: chsh
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "CHSH" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "CHSH" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/expiry.1

@@ -2,12 +2,12 @@
 .\"     Title: expiry
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "EXPIRY" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "EXPIRY" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/gpasswd.1

@@ -2,12 +2,12 @@
 .\"     Title: gpasswd
 .\"    Author: Rafal Maszkowski
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "GPASSWD" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "GPASSWD" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/groups.1

@@ -2,12 +2,12 @@
 .\"     Title: groups
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "GROUPS" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "GROUPS" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/id.1

@@ -2,12 +2,12 @@
 .\"     Title: id
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "ID" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "ID" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/login.1

@@ -2,12 +2,12 @@
 .\"     Title: login
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "LOGIN" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "LOGIN" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -115,13 +115,6 @@ Name des fernen Rechners f\(:ur diese Anmeldung\&.
 beh\(:alt die Umgebung bei\&.
 .RE
 .PP
-\fB\-r\fR
-.RS 4
-f\(:uhrt das Autologin\-Protokoll f\(:ur
-\fBrlogin\fR
-aus\&.
-.RE
-.PP
 The
 \fB\-r\fR,
 \fB\-h\fR

man/de/man1/newgrp.1

@@ -2,12 +2,12 @@
 .\"     Title: newgrp
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "NEWGRP" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "NEWGRP" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/passwd.1

@@ -2,12 +2,12 @@
 .\"     Title: passwd
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "PASSWD" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "PASSWD" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/sg.1

@@ -2,12 +2,12 @@
 .\"     Title: sg
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "SG" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "SG" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man1/su.1

@@ -2,12 +2,12 @@
 .\"     Title: su
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: User Commands
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "SU" "1" "28.06.2024" "shadow\-utils 4\&.15\&.3" "User Commands"
+.TH "SU" "1" "18.06.2024" "shadow\-utils 4\&.16\&.0" "User Commands"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man3/shadow.3

@@ -2,12 +2,12 @@
 .\"     Title: shadow
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual: Library Calls
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "SHADOW" "3" "28.06.2024" "shadow\-utils 4\&.15\&.3" "Library Calls"
+.TH "SHADOW" "3" "18.06.2024" "shadow\-utils 4\&.16\&.0" "Library Calls"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

man/de/man5/faillog.5

@@ -2,12 +2,12 @@
 .\"     Title: faillog
 .\"    Author: Julianne Frances Haugh
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 28.06.2024
+.\"      Date: 18.06.2024
 .\"    Manual:  File Formats and Configuration Files
-.\"    Source: shadow-utils 4.15.3
+.\"    Source: shadow-utils 4.16.0
 .\"  Language: German
 .\"
-.TH "FAILLOG" "5" "28.06.2024" "shadow\-utils 4\&.15\&.3" "File Formats and Configuratio"
+.TH "FAILLOG" "5" "18.06.2024" "shadow\-utils 4\&.16\&.0" "File Formats and Configuratio"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------