Multiple files in libcamera are missing SPDX headers. Add them with the
following licenses:
- CC-BY-SA-4.0 for documentation
- CC0-1.0 for build system, development tool configuration files and
TODO lists, as we consider them non-copyrightable, and for example
configuration files to facilitate their use
- BSD-2-Clause for a file copied from the Raspberry Pi tuning tool (and
add the corresponding copyright information)
While at it, add a missing blank line to
src/libcamera/pipeline/virtual/README.md.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
The reuse tool fails to lint the extract-docs.py file because it
considers the 'SPDX-License-Identifier' string in a regex as a malformed
license identifier. Work around the issue by adding parentheses in the
regular expression, which doesn't affect the behaviour of the regex
matching but prevents the reuse tool from seeing the line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
libcamera use the nlohmann_json wrap indirectly through libpisp. This
causes the nlohmann_json.wrap being copied to /subprojects at configure
time, and nlohmann_json being downloaded to /nlohmann_json-3.11.2. Add
an entryto .gitignore to cover both.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
The sensor-config property may optionally be specified to give the
outputSize and bitDepth of the SensorConfiguration that is applied to
the camera configuration. For example, use
libcamerasrc sensor-config="sensor/config,width=2304,height=1296,depth=10"
to request the 10-bit 2304x1296 mode of a sensor.
All three parameters, width, height and bit depth, must be present, or
it will issue a warning and revert to automatic mode selection (as if
there were no sensor-config at all).
If a mode is requested that doesn't exist then camera configuration
will fail and the pipeline won't start.
As future-proofing, the SensorConfiguration's binning, increment and
analog-crop parameters may be specified, though libcamera currently
ignores them.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Closes: https://gitlab.freedesktop.org/camera/libcamera/-/issues/300
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Fabien Danieau <fabien.danieau@pollen-robotics.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The cam tool is our swiss army knife for interogating libcamera.
A frequently needed piece of information is to determine what version of
libcamera is installed or being run on a system.
This information is available in the debug logs of libcamera when a
CameraManager is instantiated. However without actually starting the
CameraManager this information is not presented.
Add an option to 'cam' to allow it to report the version. Whilst this
is the version from the 'cam' command, it directly gets the version of
the libcamera library to which cam is linked.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Between v2 and the now merged v3 of commit 42d914f20c ("Documentation:
Enable doxygen-awesome-css") the GENERATE_TREEVIEW = YES was dropped
because it defaults to YES according to the doxygen web documentation.
Unfortunately for doxygen < 1.13.0 the default was NO. Fix the value to
YES so that doxygen-awesome-css works properly even with older versions
of doxygen.
Fixes: 42d914f20c ("Documentation: Enable doxygen-awesome-css")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the Pipeline handler name to the Camera Properties when a camera is
constructed.
This helps support and identify how the camera is being managed
internally and what configuration has taken effect, especially as the
pipeline handler chosen can be impacted by both environment variables
and configuration files.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Introduce a script which can be installed into the system to aide
reporting potential camera and media related issues.
The script shall capture system information and store it in a temporary
file - but it remains the users responsibilty to choose to share this
data, and no automatic bug submissions are anticipated.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The intent of the outputCfgs argument to the configure() function of
converter classes and the softISP is to allow the passed in stream-configs
to not be changed.
But only the vector is const, the reference inside the vector are not
const, which allows modifying the stream-configs as can be seen inside
DebayerEGL::configure() which was using a non const reference outputCfg
helper variable.
Fix this by making the references inside the vector const.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
This commit removes the Raspberry Pi CTT from the libcamera source tree.
This change is introduced to help a number of RPi users who are not so
faimilar with git and cloing the libcamera tree to run the CTT. The
library is also modularised in python for our users to incorporate into
their own "tuning" applications if needed. Licensing for our CTT tool
remains the same.
The Raspberry Pi CTT now lives at the following repo:
https://github.com/raspberrypi/ctt
and a package is avilable on pypi to install:
https://pypi.org/project/rpi-ctt/
This commit also removes the delayedctrls_parse.py script that has long
since code rotted.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Previously it was not possible to disable the use of libtiff in the cam
and qcam applications if it was detected. Fix that by adding a meson
feature option.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Previously it was not possible to control these dependencies, they were
always used if found. Furthermore, libjpeg was unnecessarily added as a
dependency even if sdl2 was not found. Fix that by introducing three
options to control the dependencies.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generateLut was failing to fill in the final slope value, meaning that
fully saturated pixels would full slightly short (the slope of the
final piecewise linear segment would default to zero).
The loop is slightly reorganised to fix the problem.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@rasbperrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
As shown by commit 94d32fdc55 ("pipeline: simple: Consider output sizes
when choosing pipe config"), the extra pixel columns CPU debayering
requires on the input side makes resolution selection non trivial.
Add logging of the selected input config on a successful configure() so
that the logs clearly show which sensor mode has been selected.
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add CPU soft ISP multi-threading support.
Benchmark results for the Arduino Uno-Q with a weak CPU which is good for
performance testing, all numbers with an IMX219 running at
3280x2464 -> 3272x2464:
1 thread : 147ms / frame, ~6.5 fps
2 threads: 80ms / frame, ~12.5 fps
3 threads: 65ms / frame, ~15 fps
Adding a 4th thread does not improve performance.
Tested-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com> # ThinkPad X1 Yoga Gen 7 + ov2740
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a DebayerCpuThreadclass and use this in the inner render loop.
This contains data which needs to be separate per thread.
This is a preparation patch for making DebayerCpu support multi-threading.
Benchmarking on the Arduino Uno-Q with a weak CPU which is good for
performance testing, shows 146-147ms per 3272x2464 frame both before and
after this change, with things maybe being 0.5 ms slower after this change.
Tested-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com> # ThinkPad X1 Yoga Gen 7 + ov2740
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Make the storage used to accumulate the RGB sums and the Y histogram
value a vector of SwIspStats objects instead of a single object so
that when using multi-threading every thread can use its own storage to
collect intermediate stats to avoid cache-line bouncing.
Benchmarking with the GPU-ISP which does separate swstats benchmarking,
on the Arduino Uno-Q which has a weak CPU which is good for performance
testing, shows 20ms to generate stats for a 3272x2464 frame both before
and after this change.
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
`std::atomic_{load,store}()` with `std::shared_ptr` has been deprecated
in C++20 in favour of `std::atomic<std::shared_ptr<>>`. However, it is
not available on all supported platforms. So ignore the deprecation warnings.
The specialization is available since gcc (libstdc++) 12 and llvm (libc++) 15.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
In C++20 mode, object slicing in a return statement triggers automatic move
since GCC 11, and using `std::move()` emits `-Wredundant-move` in those
same GCC versions. So disable the warning in those as well.
This is relevant for `valueOrTuple()` in `py_helpers.cpp`, which
returns a `py::tuple` as `py::object`.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
There is nothing inherently non-constexpr in the `Quantized` type. Whether
it can work in `constexpr` contexts depends on the traits type. There is
no reason to explicitly disallow `constexpr` operation. So mark all eligible
methods `constexpr`.
In addition, add some `static_assert()`s to the "quantized" test to check
constexpr operation.
For example, `FixedPointQTraits<...>::toFloat()` is `constexpr`, so this
enables the construction of `{U,}Q<...>` from the underlying quantized
value in `constexpr` contexts, which can be useful for example for
storing default values in e.g. `static constexpr` variables.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
`CameraSensorHelper::gain(uint32_t)` maps a gain code to the actual floating
point gain value. Calling it with `1.0` as the argument will simply get
the real gain for gain code 1. This is most likely not what was intended.
For example, in the case of the `ov2740` sensor, `againMin` is 1, but the
calculated `again10` (1 / 128 ~ 0.078) ends up being < 1, meaning that the
agc algorithm will never lower the exposure.
Fix that by using the maximum of the minimum gain and 1 as `again10`.
Fixes: 950ca85e8a ("ipa: software_isp: AGC: Do not lower gain below 1.0")
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Debayer parameters and processing are currently run asynchronously.
This can lead to assertion errors in case the processing tries to use
not yet computed debayer parameters. To prevent this situation, specify
some default values for DebayerParams members. This doesn't make
correct parameters but prevents crashes or other crazy behaviours at
least.
Note this patch is just a workaround. The mutually asynchronous
parameters computation and processing can cause more problems, like
using parameters computed for a different frame. But it is non-trivial
to fix that; in the meantime, setting the default values solves the
worst problem.
Closes: https://gitlab.freedesktop.org/camera/libcamera/-/issues/311
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The controller min frame duration is used to rate limit how often we
run IPAs. Historically this has been set to 33333us, meaning that the
algorithms effectively skip frames when the camera is running faster
than 30fps.
This patch adds a small amount of plumbing that allows this value to
be set in the Raspberry Pi configuration file. Some applications or
platforms (such as Pi 5) are easily capable of running these more
often, should there be a need to do so.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
'const auto' and 'auto const' are interchangeable in C++. There are 446
occurrences of the former in the code base, and 67 occurrences of the
latter. Standardize on the winner.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
