Some sensors support producing and transmitting embedded data over a
stream separate from the image stream. Add support for this feature in
the CameraSensor interface, and implement it for the CameraSensorRaw
class. The CameraSensorLegacy uses the default stub implementation, as
the corresponding kernel drivers don't support embedded data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The getFormat function takes the aspect ratio and the area of the
requested size into account when choosing the best sensor size. In case
the sensor is connected to an rkisp1 the maximum supported frame size of
the ISP is another constraining factor for the selection of the best
format. Add a maxSize parameter to support such a constraint.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Add properties covering the sensor control application delays to both
the static CameraSensorProperties definitions. The values used are
taken from Raspberry Pi's CamHelper class definitions. Where no more
specific values are known the delay struct is defined as empty and
defaults supplied through the getter function.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
In order to support a default implementation for camera sensors when no
better implementation matches, libcamera needs to try "specialized"
implementations first and pick the default last. Make this possible by
adding a priority value for factories. Newly registered factories are
inserted in the factories list sorted by descending priority, and the
default factory uses a negative priority to be inserted as the last
element.
This mechanism may be a bit overkill in the sense that there is no
expected use cases for priorities other than trying the default last,
but the implementation is simple and easy to understand.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
With a camera sensor factory in place, the next step is to create an
abstract base class that all camera sensors implement, providing a
uniform API to pipeline handler. Turn all public functions of the
CameraSensor class into pure virtual functions, and move the
implementation to the CameraSensorLegacy class.
Part of the code is likely worth keeping as common helpers in a base
class. However, to follow the principle of not designing helpers with a
single user, this commit moves the whole implementation. Common helpers
will be introduced later, along with other CameraSensor subclasses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Pipeline handlers may need to know the Bayer order produced by the
sensor when a Transform is applied (horizontal or vertical flip). This
is currently implemented manually in the Raspberry Pi pipeline handler.
Move the implementation to the CameraSensor class to make it usable in
other pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
The CameraSensor class has grown a lot since its creation, with many
functions added for different types of purposes. They are not grouped by
categories in the class definition, generating confusion when reading
the header file. Improve readability by sorting functions by category:
- Getters for static data (model, entity, focus lens, ...)
- Format and sensor configuration accessors
- Properties and controls (including test pattern mode)
Update the .cpp file accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
The CameraSensor::updateControlInfo() function is a wrapper around the
same function of the V4L2Subdevice class. It was meant to be called by
pipeline handlers that modify the sensor configuration directly,
bypassing the CameraSensor::setFormat() function. This never happened,
and the function is called once only, internally to the CameraSensor
class. No external users are foreseen, drop the function and call
V4L2Subdevice::updateControlInfo() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
The cached rotationTransform_ value is used in computeTransform() only,
to compute the mounting orientation. Cache the mounting orientation
instead, removing the need for the intermediate conversion of the
rotation to a transform.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Replace the usage of CameraConfiguration::transform with the newly
introduced CameraConfiguration::orientation.
Rework and rename the CameraSensor::validateTransform(transform) to
CameraSensor::computeTransform(orientation), that given the desired
image orientation computes the Transform that pipeline handlers should
apply to the sensor to obtain it.
Port all pipeline handlers to use the newly introduced function.
This commit breaks existing applications as it removes the public
CameraConfiguration::transform in favour of
CameraConfiguration::orientation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a function to the CameraSensor class that allows to test a format
without applying it to the subdevice and without modifying any control
value associated with the camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Commit 6f6e1bf704 ("libcamera: camera_sensor: Apply flips at
setFormat()") extended the CameraSensor::setFormat() function
to apply vertical/horizontal flips on the sensor based on the
supplied Transform. To pass the Transform to the function the
V4L2SubdeviceFormat structure has been augmented with a Transform
member.
However as the newly added Transform is not used at all in the
V4L2Subdevice class, it should not be part of V4L2SubdeviceFormat.
Fix that by removing the transform field from V4L2SubdeviceFormat
and pass it as an explicit parameter to CameraSensor::setFormat().
Fixes: 6f6e1bf704 ("libcamera: camera_sensor: Apply flips at setFormat())
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The two pipeline handlers that currently support Transform (IPU3 and
RaspberryPi) implement it by operating H/V flips on the image sensor.
Centralize the code that validates a Transform request against the
sensor rotation capabilities in the CameraSensor class.
The implementation in the IPU3 pipeline handler was copied from the
RaspberryPi implementation, and is now centralized in CameraSensor to
make it easier for other platforms.
The CameraSensor::validateTransform() implementation comes directly from
the RaspberryPi pipeline handler, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
During the camera sensor driver validation, verify if the sensor
supports horizontal and vertical flips and store a flag as
CameraSensor::supportFlips_ class member.
The flag will be later inspected when applying flips.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Add a function to check for and initialise any VCMs linked to the
CameraSensor's entity by ancillary links. This should initialise
the lens_ member with the linked entity. Call the new function
during CameraSensor::init().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The CameraSensor stores TestPatternModes as an int32_t. This prevents
the compiler from verifying the usage against the defined enum types.
Fix references to the TestPatternMode to store the value as the
TestPatternModeEnum type which is defined by the control generator.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Tracepoints.h.in is not modified to use the pragma as it requires
self-inclusion.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
In CameraSensor, the mbusCodes() and sizes() accessor functions
retrieves all the supported media bus codes and the supported sizes
respectively. However, this is quite limiting since the caller
probably isn't in a position to match which range of sizes are
supported for a particular mbusCode.
Hence, the caller is most likely interested to know about the sizes
supported for a particular media bus code. This patch transforms the
existing CameraSensor::sizes() to CameraSensor::sizes(mbuscode) to
achieve that goal.
The patch also transforms existing CIO2Device::sizes() in IPU3 pipeline
handler to CIO2Device::sizes(PixelFormat) on a similar principle. The
function is then plumbed to CameraSensor::sizes(mbusCode) to enumerate
the per-format sizes as required in
PipelineHandlerIPU3::generateConfiguration().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
CameraSensorInfo structure is designed to pass in camera sensor related
information from pipeline-handler to IPA. Since the pipeline-handler
and IPA are connected via mojom IPC IPA interface, the interface
itself provides a more suitable placement of CameraSensorInfo,
instead of camera_sensor.h (which is a libcamera internal header
ultimately, at this point).
As CameraSensorInfo is already defined in core.mojom, it is just
a matter of removing [skipHeader] tag to allow code-generation
of CameraSensorInfo.
Finally, update header paths to include CameraSensorInfo definition
from IPA interfaces instead of "libcamera/internal/camera_sensor.h".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The minimum and maximum vblanking can change when a new format is
applied to the sensor subdevice, so be sure to retrieve up-to-date
values.
The V4L2Device acquires the new updateControlInfo() method to perform
this function, and which the CameraSensor calls automatically if its
setFormat method is used to update the sensor.
However, not all pipeline handlers invoke the setFormat method
directly, so the new method must be made publicly available for
pipeline handlers to call if they need to.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Register static properties in the CameraSensor class by inspecting the
camera sensor properties database.
Static properties are overridden by properties retrieved from
the kernel interface at run-time if any overlap between the two
sets occurs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Since commit 96aecfe365 ("libcamera: camera_sensor: Use active area
size as resolution") the CameraSensor::resolution() method returned the
sensor's active pixel area size.
As the CameraSensor::resolution() method is widely used in the library
code base to retrieve the maximum frame size the sensor can produce,
in case it is smaller than the pixel area size the returned size cannot
be used to configure the sensor correctly.
Fix this by returning the maximum frame resolution the sensor can
produce, or the pixel area size in case the sensor embeds and ISP that
can upscale and the supported maximum frame size is thus larger that
the pixel array size.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
When a sensor can upscale the image, the native sensor resolution isn't
equal to the largest size reported by the sensor. Use the active area
size instead, and default it to the largest enumerated size if the crop
rectangle targets are not supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Replace existing use cases where the copy constructor and copy
assignment operator are deleted with the LIBCAMERA_DISABLE_COPY
statement
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The Bayer pattern is retrieved based on the media bus formats supported
by the sensor, when registering camera sensor properties. To prepare for
its usage elsewhere in the CameraSensor class, store it in a private
member variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Sensor frame length is made up of active and inactive (blanking) lines.
The minimum and maximum frame length values may be used by pipeline
handlers to limit frame durations based on the sensor mode capabilities.
Store the minimum and maximum allowable frame length values (in lines)
in the CameraSensorInfo structure. These values are computed in
CameraSensor::sensorInfo() by querying the sensor subdevice
V4L2_CID_VBLANK control limits. This in turn means that V4L2_CID_VBLANK
is now a mandatory subdevice control.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The VIMC driver does not yet support all the features required
for all sensor drivers. As it is the main testing platforms and the
driver changes might take a long time to land in the developments
and testing platforms, temporary close the gap by skipping driver
validation and initializing properties with static information such
as the sensor resolution.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Support for the V4L2 selection API is currently optional in the
CameraSensor class. Properties registered by using values read through
that API are defaulted in several different places (the Android camera
HAL or the CameraSensor class).
In the future support for the selection API will be made mandatory, but to
give time to sensor drivers in all test platforms to be updated, use
sensor resolution as fallback values for sensor pixel array properties
and cache them as class member variables.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
The CameraSensor class requires the sensor driver to report
information through V4L2 controls and through the V4L2 selection API,
and uses that information to register Camera properties and to
construct CameraSensorInfo class instances to provide them to the IPA.
Currently, validation of the kernel support happens each time a
feature is requested, with slighly similar debug/error messages
output to the user in case a feature is not supported.
Rationalize this by validating the sensor driver requirements in a
single function
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
The ID is generated from information in the firmware description of the
sensor if available or from module and model information if the sensor
is virtual (for example VIMC).
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
