The libcamerasrc gstreamer component does seem to not allow stream resolutions
that are not advertised by PipelineHandler::generateConfiguration(). This has
been raised in a bug report [1].
Fix this behavior by advertising a SizeRange from the minimum ISP resolution, up
to the sensor resolution from PipelineHandlerRPi::generateConfiguration().
[1] https://bugs.libcamera.org/show_bug.cgi?id=105
Fixes: f16acb275c ("pipeline: raspberrypi: Restrict the advertised maximum ISP output resolution")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Now that the sensor is defined to list mbus codes using its native
(untransformed) Bayer order, the method of obtaining it can be
simplified. We don't have to try and reset the flips, we just use the
value directly from the sensor.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
We clear the V4L2_CID_HFLIP and V4L2_CID_VFLIP controls immediately
after opening the camera device. This means the camera's Bayer format
and mbus codes will be in the sensor's "native" order, and we document
this to be the case so that it can be relied upon.
Clearing the flips is harmless where sensor flips do not affect the
Bayer order.
This also fixes a bug in the Raspberry Pi pipeline handler where the
native Bayer order was being computed wrongly, but the new behaviour
here will be helpful to other pipeline handlers too. A subsequent
commit will tidy up the Raspberry Pi pipeline handler in this area as
it can now be simplified.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 83a5128161 (pipeline: raspberrypi: Convert the pipeline handler to use media controller)
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
If the sensor exposes the V4L2_CID_NOTIFY_GAINS control, assume it
means the sensor wants to be told the latest colour gains.
We store whether the control exists and if so its default value, to
save us checking for it on every frame.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This change will allow the pipeline handler to enumerate and control Video
Mux or Bridge devices that may be attached between sensors and a particular
Unicam instance. Cascaded mux or bridge devices are also handled.
A new member function RPiCameraData::enumerateVideoDevices(), called from
PipelineHandlerRPi::registerCamera(), is used to identify and open all mux and
bridge subdevices present in the sensor -> Unicam link.
Relevant links are enabled/disabled and pad formats correctly set in
PipelineHandlerRPi::configure() before the camera is started.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Enumerate the sensor device entities in PipelineHandlerRPi::match() and loop
over PipelineHandlerRPi::registerCamera() for each sensor found. This will
allow the pipeline handler to register multiple cameras attached to a single
Unicam instance with a Video Mux device.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The MediaDevice lock is meant to prevent concurrent usage of multiple
cameras from the same pipeline handlers. As media devices are acquired
by pipeline handlers, we can't have multiple pipeline handlers trying to
lock the same media device. The recursive locking detection can thus be
moved to the pipeline handler. This simplifies the media device
implementation that now implements true lock semantics, and prepares for
support of concurrent camera usage.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
The Raspberry Pi pipeline handler now sets color spaces correctly.
In generateConfiguration() it sets them to reasonable default values
based on the stream role.
validate() now calls validateColorSpaces() to ensure that the
requested color spaces are sensible, before proceeding to check what
the hardware can deliver.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This function forces raw streams to have the "raw" color space, and
also optionally makes all non-raw output streams to share the same
color space as some platforms may require this.
When sharing color spaces we take the shared value to be the one from
the largest of these streams. This choice is ultimately arbitrary, but
can be appropriate if smaller output streams are used for image
analysis rather than human consumption, when the precise colours may
be less important.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This adds a ColorSpace field to the V4L2SubdeviceFormat so that we can
set and request particular color spaces from V4L2.
This commit simply adds the field and fixes some occurrences of brace
initializers that would otherwise be broken. A subsequent commit will
pass and retrieve the value correctly to/from V4l2 itself.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add functions to the V4L2Device class to convert to and from
libcamera ColorSpace.
These functions are added to the base V4L2Device class so that they can
be shared both by the video device class and subdevices.
With the ColorSpace class, the color space and related other fields
are stored together, corresponding to a number of fields in the
various different V4L2 format structures. Template functions are
therefore a convenient implementation, and we must explicitly
instantiate the templates that will be needed.
Note that unset color spaces are converted to requests for the
device's "default" color space.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Before queueing a request to the device, any synchronization fence from
the Request framebuffers has to be waited on.
Connect the Request::Private::prepared signal to the function that
queues requests to the hardware and call Request::Private::prepare().
When the waiting request queue is inspected, verify if it has completed its
preparation phase and queue it to the device.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a prepare() function to the Private Request representation.
The prepare() function is used by the PipelineHandler class to
prepare a Request to be queued to the hardware.
The current implementation of prepare() handles the fences associated
with the Framebuffers part of a Request. The function starts an event
notifier for each of those and emits the Request::prepared signal when
all fences have been signalled or an optional timeout has expired.
The optional timeout allows to interrupt blocked waits and notify the
Request as failed so that it can be cancelled.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Since a queue of waiting Requests has been introduced, not all Requests
queued to the PipelineHandler are immediately queued to the device.
As a Camera can be stopped at any time, it is required to complete the
waiting requests after the ones queued to the device had been completed.
Introduce a pure virtual PipelineHandler::stopDevice() function to be
implemented by pipeline handlers and make the PipelineHandler::stop()
function call it before completing pending requests.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In order to prepare to handle synchronization fences at Request
queueing time, split the PipelineHandler::queueRequest() function in
two, by creating a list of waiting requests and introducing the
doQueueRequest() function that queues requests to the device in the
order the pipeline has received them.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add an optional fence parameter to Request::addBuffer() to allow
associating a Fence with a FrameBuffer.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add to the FrameBuffer::Private class a unique pointer to a
Fence.
The Fence will be used to signal the availability of the Framebuffer for
incoming data transfer.
The Fence will be associated to a FrameBuffer at Request::addBuffer()
time, and if correctly signalled, reset by the core at Request queue
time.
If a FrameBuffer completes with errors, due to a Fence wait failure, the
Fence will still be owned by the FrameBuffer and it is application
responsibility to correctly reset it before reusing the buffer.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Introduce a Fence class which models a synchronization primitive that
allows to notify the availability of a resource.
The Fence is modeled as a wrapper of a UniqueFD instance where
read events are used to signal the Fence. The class can be later
extended to support additional signalling mechanisms.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement the D-Pointer design pattern in the Request class to allow
changing internal data without affecting the public ABI.
Move the internal fields that are not needed to implement the public
API to the Request::Private class already. This allows to remove
the friend class declaration for the PipelineHandler class, which can
now use the Request::Private API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Move all internal fields to Request::Private and remove friend declaration]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The Timer debug output does not report to which timer a condition refers
to. Fix that by printing the Timer address.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Limit the advertised ISP output sizes available to the sensor resolution in
PipelineHandlerRPi::generateConfiguration(). The user is free to configure a
larger resolution than this, and this will work. However, this stops strange
behavior in applications that use the V4L2 compatability layer to run, and
request the largest possible advertised resolution, which is much larger than
the sensor resolution.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Use the new utils::abs_diff() function where appropriate to replace
manual implementations.
While at it fix a header ordering issue in
src/libcamera/pipeline/raspberrypi/raspberrypi.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
The abs_diff() function computes the absolute difference of two
elements. This may seem trivial at first, but can lead to unexpected
results when operating on unsigned operands. A common implementation
of the absolute difference of two unsigned int (used through the
libcamera code base) is
std::abs(static_cast<int>(a - b))
but doesn't return the expected result when either a or b is larger than
UINT_MAX / 2 due to overflows. The abs_diff() function offers a safe
alternative.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
The SharedFD::dup() implementation calls the C library dup() function on
the fd. When the SharedFD instance is invalid, this produces an invalid
fd, which is the correct behaviour, but logs an error message.
Fix it by returning an invalid UniqueFD directly when the SharedFD is
invalid. This also saves a system call, which is always nice to do.
Fixes: fcf98514cb ("libcamera: base: file_descriptor: Return UniqueFD from dup()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
The CameraSensor stores TestPatternModes as an int32_t. This prevents
the compiler from verifying the usage against the defined enum types.
Fix references to the TestPatternMode to store the value as the
TestPatternModeEnum type which is defined by the control generator.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
We cannot have a subclass of FrameBuffer because it is marked as final.
This adds a FrameBuffer constructor with FrameBuffer::Private. So we
can attach some additional resources with FrameBuffer through a
customized FrameBuffer::Private class.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
If there is no lens detected by the system, then we will not be able to
set the control, so we can skip processing of the list.
Furthermore, if the IPA has not set a V4L2_CID_FOCUS_ABSOLUTE control,
then a warning will be printed as the lensControls.get() will not
succeed.
Break out of the control parsing when there is no CameraLens
device, or if there is no absolute focus control set by the IPA.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add == and != comparison operators between two SharedFD instances, and
use them to replace manuel get() calls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
For consistency with UniqueFD, rename the fd() function to get().
Renaming UniqueFD::get() to fd() would have been another option, but was
rejected to keep as close as possible to the std::shared_ptr<> and
std::unique_ptr<> APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Manages a file descriptor owned by DmaHeaps for a dma handle by
UniqueFD. Furthermore, DmaHeaps::alloc() creates a new file
descriptor and the returned file descriptor is owned by a caller.
This also clarifies it by changing the returned value to UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The V4L2VideoDevice::open() function that takes an open file handle
duplicates it internally, and leaves the original handle untouched. This
is documented but not enforced through language constructs. Fix it by
passing a FileDescriptor to the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Naushir Patuck
David Plowman
Kieran Bingham
Laurent Pinchart
Jacopo Mondi
Hirokazu Honda