When users open volume panel and keep on changing the volume slider for
a while, the panel starts to defer the slider updating, and finally gets
stuck and causes an ANR.
Root cause:
Volume panel has four volume adjusting slices. Each of them registers
a broadcast receiver to listen to the volume changed and muted events.
However, when the media volume changes, AudioManager will send four
broadcasts (music, assistant, accessibility, tts) to every receiver, and
each of them will reload slice four times. Thus, one media volume
changed event will lead to 16 (4*4) UI updates. Consequently, keeping on
sliding the volume bar will trigger hundreds of broadcasts and UI
updates, which makes the system busy and getting stuck.
Solution:
Introduce a VolumeSliceHelper to integrate the broadcasts of the volume
slices specifically.
1. Only register one broadcast receiver to reduce the broadcast loading
since the four slices are listening to the same signal.
2. Filter the only one eligible broadcast among the multiple concurrent
ones, and then relay it to the registered slice.
3. Listen to one more action STREAM_DEVICES_CHANGED_ACTION to update the
volume panel when audio output device changes.
Test: robotest, visual
Fixes: 144134209
Fixes: 160489394
Change-Id: I780b9eee35802b19a5f0ab0a7d07bd3e081f5556
Merged-In: I780b9eee35802b19a5f0ab0a7d07bd3e081f5556
(cherry picked from commit 2c7b77dad7)
Re-launching volume panel continuously will trigger an endless panel
loading, show a transparent unfinished UI, and then block the user's
screen.
Root cause:
When the activity receives a new intent from user's clicking, it will
call PanelFragment#createPanelContent to update the current fragment.
The method triggers an animation and then loads the panel content. If
multiple invocations run concurrently before the animation or the
loading finish, the loader's countdown latch will be increased
abnormally and lead to the endless loading.
Solution:
1. Since the invocations are in UI thread, simply add a flag to avoid
reentrance when the panel is animating or loading.
2. Filter out the same panel's creation request when the panel is still
visible.
3. Do not force a panel's recreation when it's under construction.
Fixes: 143889510
Fixes: 160491854
Test: robotest, manual
Change-Id: I821faedeb62354929f3af9804cbbe44ee5bb8a53
Merged-In: I821faedeb62354929f3af9804cbbe44ee5bb8a53
(cherry picked from commit 6a8d2c5e55)
- This CL uses new CachedBluetoothDevice callback instance
in construct to avoid unregister wrong callback.
- This CL uses flag to make sure preference will register callback
on onAttached() when preference remove callback on
onPrepareForRemoval() or onDetached().
- Update test case
Bug: 168682778
Bug: 157653997
Test: make -j42 RunSettingsRoboTests
Change-Id: I7a0d9f5332153ee80634e191847b84cd7c380b7d
Merged-In: I7a0d9f5332153ee80634e191847b84cd7c380b7d
(cherry picked from commit cafeab2813)
- Before this CL, the output switch panel will show a default
icon if there is no media session or album art.
This CL will hide the icon if there is no media session
or album art.
- Add test case
Bug: 161495909
Test: make -j42 RunSettingsRoboTests
Change-Id: I5f80158b12f89c8499fb97d0b203ebeffefbc18b
Merged-In: I5f80158b12f89c8499fb97d0b203ebeffefbc18b
(cherry picked from commit 30805af9de)
Root cause:
Sometimes loading contextual cards exceeds 1 second and a timeout
expires. In the past, we used the timeout in order not to update
homepage UI and to avoid screen scrolling. But we've introduced a
mechanism of card space pre-allocation to avoid flickering, so when the
timeout expires, the pre-allocated space will be always blank.
Solution:
Display a card on timeout if the one-card space is pre-allocated.
Fixes: 165886791
Test: robotest
Change-Id: I79b29c5fd6d9c4fe6b53dd4f5eab4cd3a606d76d
Revert submission 12392268-cherrypick-mediaappsettings-5fxuo164a2
Bug: 161813143
Reason for revert: no longer want change in QPR
Reverted Changes:
Id3de52419:Allow user to block individual apps from resuming....
I8c85bc937:Allow user to block individual apps from resuming
Change-Id: Ieacef217587476532246b466d680219351bc1657
Use hashcode as a requestCode id, since the
same requestCode will cause the intent be cached.
Bug: 163095633
Test: make -j42 RunSettingsRoboTests
Change-Id: I2c120f18e24a66aeff5565e952fa4064149ec540
Merged-In: I2c120f18e24a66aeff5565e952fa4064149ec540
(cherry picked from commit 7f3efd4357)
For the device listed as eSIM ignored device, we should always hide the
eSIM activation button even in the developer mode.
Bug: 168266928
Test: Manually tested
Change-Id: Ide3043606de202c5903e520aa550302ff0d103d3
WifiConnectionPreferenceController only shows when there are 2 SIMs,
it shows the connected Wi-Fi network.
WifiConnectionPreferenceController does not use WifiPickerTracker
to get a WifiEntry key. It should not launch WifiNetworkDetailsFragment2
which uses a WifiEntry key to find a WifiEntry.
Bug: 168280554
Test: manual
1. Make MultiNetworkHeaderController available.
2. Settings -> Network & internet -> click connected Wi-Fi
3. See Wi-Fi Details
Change-Id: I2acea3564d2d89fe8e120064b33ef342c97edb60
Monitor Bluetooth Tethering state and update preference when there is
Bluetooth tethering state change.
Add test case to verify when recieve
BluetoothPan.TETHERING_STATE_CHANGED will update bluetooth state
Bug: 138688805
Test: make RunSettingsRoboTests
Merged-Id: I8f468d1d99ed6d87f6cd8305ef56b0d7a5dec95b
Change-Id: I8f468d1d99ed6d87f6cd8305ef56b0d7a5dec95b
This CL before, DevicePickerFragment didn't check the
whether 3rd-party app have Bluetooth permission before
sending broadcast. It's will cause the 3rd-party app can
get Bluetooth device information without request permission.
This CL will send broadcast with Bluetooth permission that
make sure the receiver who have Bluetooth permission can get
this Bluetooth device infomation.
Bug: 161716630
Test: verify on test apk to confirm that not showing mac address.
Change-Id: I6662dc38b3491e5ee467058dd74863ecac27cdd7
- This CL before, "Previously connected device" didn't
handle dock device. If user have disconnected dock
device will cause Settings crash.
This CL add condition to handle dock device to avoid crash.
- Update test case.
Bug: 157653997
Bug: 167054620
Test: make -j42 RunSettingsRoboTests
Change-Id: I769cee3f589e14a993b00a0ae6ec3ddfba8ef281
Merged-In: I769cee3f589e14a993b00a0ae6ec3ddfba8ef281
- This CL before, previously connected devices will show most
recently connected devices and the maximum is 3.
In this time, if next most recently connected device is disconnected.
It's will not show on "previously connected devices", user needs go to
"see all" page to found that device.
This CL add rule to compare the priority of most recently connected
device. If priority of next disconnected device is higher than
currnect devices that on "previously connected devices".
Let next disconnected device show on "previously connected devices".
- Update test case.
Bug: 157653997
Test: make -j42 RunSettingsRoboTests
Change-Id: I684501a20a67755b2196ba9d4b5565add01a5d01
Merged-In: I684501a20a67755b2196ba9d4b5565add01a5d01
- This CL before, Bluetooth settings will hide the "see all"
option when bluetooth is off. For the UX improvement, this
CL will show the "see all" button when bluetooth is off. And
turn on the BT when user press "see all" button to let user to
quick pair their disconnected devices.
- Update and add test case
Bug: 147150367
Test: make -j42 RunSettingsRoboTests
Change-Id: I7a1451a36a31253b6be2203341bea4e59fed7c2b
Merged-In: I7a1451a36a31253b6be2203341bea4e59fed7c2b
(cherry picked from commit bde100849e)
-Add connected devices in "Previously connected" page
-Set active when clicking a connected device
Bug: 147150246
Test: make -j50 RunSettingsRoboTests
Change-Id: I4422cd63c360a4387cedc4f80f34474b42f82a1f
(cherry picked from commit 9743fed57d)
-If media app does not support cast->phone transferring, local output
audio device is unavailable. "pair new" is for Bluetooth which should be
also unavilable.
-These types are local output audio devices:
TYPE_BUILTIN_SPEAKER
TYPE_WIRED_HEADSET
TYPE_WIRED_HEADPHONES
TYPE_USB_DEVICE
TYPE_USB_HEADSET
TYPE_USB_ACCESSORY
TYPE_DOCK
TYPE_HDMI
Bug: 163095048
Test: make -j50 RunSettingsRoboTests
Change-Id: Ib844c7546e1946cb87fac04cb8b2b8f4acf06451
(cherry picked from commit 113ac8102a)
