If we didn't set view and lifecycle for EntityHeaderController,
it only sets "z-order" as 0 for action bar.
So, user sees overlapped problem while user is scrolling view.
For now, we set view and lifecycle as parameter for EntityHeaderController,
then EntityHeaderController can change "z-order" while scrolling view.
Test: visual, robotest
Fixes: 132819126
Change-Id: Ieb01b26e4d6ca4d82f72371620938665de8149a0
Our original design for mobile network subscription management included
having an on/off toggle for both eSIMs and physical SIMs. However, it
turns out that our current telephony stack has some problems with
disabling physical SIMs, so for now we're removing the on/off
toggle. Because of this, we've added a footer to the SIM details page
for physical SIMS letting users know that to disable them you need to
remove them from the device.
Even though we're removing the on/off toggle for pSIMs, there are still
a few edge cases where you could end up with a disabled one (eg having
two SIMs in single-SIM mode where the eSIM is active and then you erased
the eSIM). In order to have a way to re-enable the pSIM in these cases,
this CL changes the relevant pref's summary to "Tap to activate <name>"
and makes the tap action begin the re-enabling. This can affect either
the Mobile network pref on the Network & internet main page (if this
disabled pSIM is the only SIM), or an entry in the Mobile networks list
page (if there are still multiple SIMs present).
Finally, this also fixes a problem where we weren't showing the on/off
toggle for eSIMs if you only had one SIM total; we actually always want
to show it for eSIMs.
Bug: 132921553
Test: make RunSettingsRoboTests
Change-Id: Id0750ebd5bed46dc2450b65b53cc81847ef09b82
NfcAirplaneModeObserver added a scenario that
switched NFC off every time a user entered connection
preferences page if airplane mode was on.
Even when a user manually switched on NFC, the observer would still
turn NFC off when re-entering connection preferences page.
GSAM TS.27 certification requires NFC state to be consistent
under AirplaneMode before and after reboot the device.
NfcAirplaneModeObserver breaks the requirement
because it would always switch NFC off under airplane mode
when a user checked the NFC state in settings page.
Fix it by removing NfcAirplaneModeObserver.
Keep the NFC state consistent.
Bug:128384879
Test: make RunSettingsRoboTests / Check Nfc on/off Status
Merged-In: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
Change-Id: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
Process privileges like open fds need to be revoked, when this
permission is denied by the user.
Test: Manually verified by checking logs.
Robotest:
atest SettingsRoboTests:ExternalSourcesDetailsTest
Bug: 133504844
Change-Id: I81da0b3a5d6c54e392828829d1a2c43488439504
In Settings, catch the intent from Telephony about SIM combination
warning and show a notification about it.
Bug: 132631355
Test: manual - have two cdma capable subscriptions active, make sure
the notification is sent, and tapping on it leads to the helper page.
Change-Id: Ifd0e13781e4afc3bfd82415b3e51fd10176d9f9d
This adds a switch which appears on the SIM details page for any SIMs
that aren't the default on for data. It lets the user opt-in to turning
on data on this SIM only in the case where there is an active call -
this is needed because in some cases the default data SIM may not be
able to be used when a call is active on another SIM.
Bug: 132114205
Test: make RunSettingsRoboTests
Change-Id: Ie44c56e0f486fd93aff411a0ba0e47d3695a4941
Disables the Gesture navigation radio button if 3P launcher is set as
default for current user. Also shows an info icon on the right side that
opens a dialog explaining why it is disables.
Bug: 129532605
Test: Manual test with 3P launcher
Test: make RunSettingsRoboTests ROBOTEST_FILTER=RadioButtonPreferenceWithExtraWidgetTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=SystemNavigationGestureSettingsTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=SystemNavigationPreferenceControllerTest
Change-Id: I90000c74246699fa9391ac042c87d7f0ece03637
This CL is built to make CBRS show correct data usage, by merging
all subscriberId under same groupuuid.
Bug: 133865338
Test: RunSettingsRoboTests
Change-Id: I3c717d0f1a1b95aa21c2ccefe4d1cefb4d854cb5
Audio streams for phone calls in BT device (STREAM_VOICE_CALL) is not
supported in AudioManager.getStreamMinVolume(), fallback to use
STREAM_VOICE_CALL
Fixes: 133812547
Test: make RunSettingsRoboTests
Change-Id: I8e330f60bae2a7cf9cd0cf7288076b8320ccc504
Second user or guest is limited some mobile network access. We need to check current user
is admin or not to decide the preferece page will be found in search or not.
Bug: 133466016
Fixes: 133466016
Test: Manual test & make RunSettingsRoboTests -j56 ROBOTEST_FILTER=com.android.settings.network
Change-Id: I48d3064a8aa28ac1f2ac699b42a999b9682b1b52
1. In High usage dialog, show top apps based on battery usage, not app
time.
2. Refactor the check for hidden system modules into ShouldHideSipper,
however don't smear it, this is also the current logic before this CL.
Bug: 133445008
Test: RunSettingsRoboTests
Change-Id: I851a1c9ef9b79a934ba0501cd96001f2e450bda4
When it is null, we should also update SliceView, so SliceView can
update to be "invisible"
Fixes: 133790296
Test: RunSettingsRoboTests
Change-Id: I239405cce8bcadacbd374ccbb24d0fcbadc04880
We initially landed support for erasing an eSIM subscription in
ag/7208624 for b/124254555 using our own confirmation/progress UI, and
calling the EuiccManager.deleteSubscription method to do the
deletion. It turns out this is a low-level API which doesn't handle some
important cases such as subscription grouping or the eSIM slot not being
active.
This CL changes Settings to just launch an intent to begin an eSIM
Manager flow to delete a subscription that provides its own
confirmation/progress UI, and should properly handle subscription
grouping and making the eSIM slot active as needed.
Bug: 132114333
Test: make RunSettingsRoboTests
Change-Id: Ie59fea37fa73c5e6573e1181e271ffb5d453bd08
When a device is in DSDS mode with multiple SIMs, we show a header on
the Network & internet page with a "connectivity overview", with an
entry for Wi-Fi (if connected) and each active SIM. The icon for Wi-Fi
shows signal strength, but the icons for the active SIMs were just
static; this CL fixes that. It introduces a class for listening to
signal strength changes on a set of subscriptions, and moves some
existing code we had for displaying signal strength (when manually
picking networks for GSM) in NetworkOperatorPreference into a utility
method that can be shared.
Bug: 128855095
Test: make RunSettingsRoboTests
Change-Id: I668cafe1e9f9c3651b1f33783c8538ad9c2732b5
Add a new developer settings toggle to allow users to
toggle wifi scan throttling off.
Bug: 112825565
Test: atest com.android.settings.development
Test: Manual verification of the new switch.
Change-Id: I1d8c149305ca92957c7d1b9f28497291ca8b2bf7
This removes the parts of the feature that were only needed in beta
releases:
- Develper setting to force feature on or off.
Not to be submitted until after beta 5 is cut.
Bug: 131747138
Test: Still builds, developer settings still works.
Change-Id: I573761174317797aeb4df97cf1a2b1ce005c0715
ZXing generate QR code with default encoding ISO-8859-1,
the generated QR code is wrong encoded if there is a
character outside of the charset.
Generate QR code of UTF-8 encoding.
Bug: 131851854
Test: manual
Change-Id: I96a5e72a978c654b62d89b3b11dd3016bf0ee1df
There is API to open up the app-specific bubble page, therefor, we should
always show the toggle. The previous work to move bubbles to developer
settings broke this.
This CL adds a param to the controller to note whether it's the app
specific page or not (since controller is also used for channel settings)
to enable this behaviour.
Added a test for this situation.
Test: make -j40 RunSettingsRoboTests ROBOTEST_FILTER=Bubble
Bug: 131846917
Change-Id: I72b1f4b5b033d1b24281061cfa6bed4d734dfcb1
Return null when slider getMax() <= getMin(), instead of force
build it to make it crash
Fixes: 132657278
Test: RunSettingsRoboTests
Change-Id: I9f3c078ae07522aa8f1cebdee3f73df2d014d6bb
