LoadResources should only decide on the resource type,
everything else is handled by the resources themselves.
Change-Id: I30f68293960c23560979f650efc4393992cf5824
fgets reads up to one byte less than size then with \0 at the end
adding \n after \0 is useless too
Change-Id: I7758d7a8f885bdde2b491a9cb75800f831d77c1f
Note: Only works on ext2/3/4 partitions. Only tested on ext4.
We can use this in some cases to resize the data partition if an
incorrect fstab caused recovery to not reserve the 16KB for a
crypto footer.
Sometimes the BoardConfig for a custom ROM does not have the
correct size for the system partition and if the ROM flashes a
raw system image, that image will not take up the full block
device. Running resize2fs can fix the size and may allow more
room in the system partition for customizations like busybox or
a larger gapps package.
Sometimes flashing a factory image may flash userdata with an
image with a file system that does not take up the full size of
the block device (e.g. factory images for the Nexus 6 will flash
userdata with a ~24GB userdata image, wasting ~30GB of space).
Using resize2fs we can easily fix this issue without having to do
a full format data.
Change-Id: I631f5c6f567bbc6a9241e5dd95f1e435820a1b13
Mounting system as rw can prevent future OTA updates. The purpose
of this patch set is to prevent TWRP from mounting sytem as rw on
the first boot. Device maintainers should update their twrp.fstab
files on these devices to include an additional line:
/system_image emmc /dev/block/../system
This line will allow TWRP to create a raw system image backup to
ensure that the user can return to an original state for future
OTA updates.
Change-Id: I8929d85bc3a5b96cc564bc7f734b58d5612ec833
If a page is requested for overlay, ensure it doesn't already exist in
the stack of existing overlays. If it does, erase the existing page
and push_back the new one.
Change-Id: I9feeea06cf7aad2e08a8c3bc567aaa761db2c3bc
This should fix daylight saving time display for most users.
For fully correct time zones we need the tzdata database.
Change-Id: I7b7693ab0abaf20be217bd06d525f03fb89b7217
* Applicable to non-rooted devices running portrait mode only.
* Touching the button has no effect, supposed to reboot/poweroff.
Change-Id: If67649c4c83ddf549c833f94c66829e0877969c5
Also minor cleanups:
- move array limits from #defines to a protected enum
- zero fill layouts in ctor
Change-Id: I8fe0f8465ebc646ad3bf3cc3f8490dbdd384f43d
"_" was broken due to a bad XML attribute name, and the others
didn't produce the highlighted character in shift mode.
Change-Id: I271fbf4e083ccdb69c469cbdae44101afed4fd1e
This is needed to make touch work on the x86-64 emulator target
though I have seen the key code used on other devices as a way to
synchronize touch events.
Change-Id: I31a3cc56e6470f2c707641b537140e44f5e686aa
This will significantly reduce theme maintainence and should be a
lot more sustainable over time. Eliminate most themes leaving only
5 remaining in 3 categores:
* watch_mdpi: 320x320
* portrait_mdpi: 480x800
* portrait_hdpi: 1080x1920
* landscape_mdpi: 800x480
* landscape_hdpi: 1920x1200
Add handling to map the old DEVICE RESOLUTION to the new TW_THEME
build flag. New devices should specify a theme using the new
TW_THEME build flag using one of the 5 values from the list above.
Long term we will eliminate the use of the DEVICE_RESOLUTION flag
in favor of the new flag.
Change the way sliders render so that they completely follow the
placement="5". This will probably break some custom themes but is
necessary so that we can retain the aspect ratio on slider images
and still have them rendered at the center of the screen.
Add code to the console slideout button so that it can be centered.
Centering the slideout button allows us to keep the button at the
center of the screen when retaining aspect ratios on the image.
Add more retain aspect ratios for home, back, slideout, folder,
file, and lock screen images.
Change the way we build the top bar in TWRP. It is now mostly
drawn using fill objects and the TWRP logo is a separate image so
that we can retain its aspect ratio during scaling. Thanks to Mark
Norelus for providing the TWRP logo.
Change-Id: I801a7b3163cad9ef353461f4c327690a9ccbb3aa
storing strings in a map (for fast lookup) in resource manager
To define a string resource in <resources>:
<string name="foo">Hello</string>
To use a string, e.g.:
<text>%@foo%</text>
Not yet done: language-specific resources (should be solved not only for
strings, but for all kinds of resources - e.g. for localized images)
Change-Id: I3ba5cf5298c09e0d28a83973e9662f179271b33f
- separate collections for fonts, images, animations
- no more ugly casts
- fix crash if main ui.xml did not define any resources but include did
- don't stop loading resources if one "type" attribute is missing
Change-Id: I70c1c9ca66ca65d9fba1ba3eded34f3d8a07488e
Not all themes tested.
To center the scrollbar horizontally on the line, the width must be
fastscroll_linew + 2 * something.
Change-Id: I3c2878734ffbd2e8ef3bc7c64b2f16d4f61aeda5
- Rebase console on ScrollList
- Add fastscroll bar to console
- ScrollList now has a mode that ignores selections
- Increase kinetic scrolling speed for lists showing many items
Change-Id: I6298d717d2e403f3e85e2c633d53c4284a066012
- so derived lists can draw whatever they want (multi-line etc.)
- replace GetListItem with RenderItem
- minor cleanup
Change-Id: I062e0a354f1c18ce0a5232b7542c4987b480e232
(for compressed backup users with low space).
Clean up backup folder and copy only recovery.log for debugging.
Conflicts:
gui/devices/watch/res/watch.xml
Change-Id: If8aa3580dbc082d0fe4882d4af8dc3cdb362a8b5
- Attribute "recth" in the <fastscroll> element is now the
*minimum* height for the scrollbar.
- Dragging the scrollbar moves the list.
- Touching outside the scrollbar jumps to the relative position.
Change-Id: Ic1f20b5ec68cf49e5be56be34f0c58c0f474618b
Also allow sliders to have their own text label instead of
requiring a whole separate text object for the label in the xml.
Change-Id: I6e314efb4bb454d496555ff7e003d743063a1308
If the <header> element doesn't exist, the header is not drawn.
- minuitwrp: add function for clipping all drawing to a rectangle
...and another one to cancel it.
Change-Id: If0f688a5debee6ebd9c457999fe571705a42c5cc
- add string, int, color and resource loading helpers
- use typed resource classes, and some cleanup in loading code
- remove abstract GetResource() to enforce type safe access
- add height and width query methods to resources and use them
- minor cleanup
- simplify LoadPlacement
Change-Id: I9b81785109a80b3806ad6b50cba4d893b87b0db1
Base class must be called first, otherwise the condition can never
again become true. Fixes font size switching in Material theme.
Change-Id: I160a733549495e1bde3cead56b0a3582f0dc744c
With this patch set, if needed, we scale the images during early
boot. TTF support is needed to properly scale the font. No font
scaling is done on the old style fixed width font used in the
console.
Special thanks to _that for figuring out the scaling and blending
function calls to make this possible.
Change-Id: If2f79bef16d6db2e1298bfc3d00c9bcca2bee37a
Resources are deleted by ~PageSet and do not need to be deleted
by the the scrollable list elements. This fixes a crash when
reloading the theme.
Also remove some deletes for items that should not be deleted in
button and input GUI elements.
Change-Id: Ie1c1b85c81c10f648d085746a5fdba6220468a5f
- add a timeout to ev_get
- set timeout to 1 second when idle
- delay timeout for 15 frames to keep animation objects working
- stop kinetic scrolling immediately at end of list
Change-Id: I77138055c464b65b71e296f9c7ef63ea06809bc1
Fixes a problem where, if you decrypt the device, the promtp for
installing SuperSU appears briefly before it automatically
reboots without letting you confirm or deny.
Change-Id: I6f7b1c7096e788ccabd8f5aac9eb01d38bfbc0f7
Speeding up scrolling after releasing is distracting, get rid of it.
Instead reduce friction to its previous value.
Change-Id: I5c99cc71b631747697e967bd75669aa3d908c637
The goal of this patch set is to eliminate the code duplication
caused by copy/paste of the code in the file selector, listbox,
and partition list GUI elements. Those classes will now utilize a
single GUIScrollList class that will handle rendering and
scrolling.
Change-Id: I0cb98ab36cf47178296034293435225658c779cd
-Create a separate function to disable stock recovery flashing
-Add a call to that function to the reboot section of the ORS
action so that an OTA update will not inadvertantly replace TWRP
Change-Id: I43eae81e0e76971b6e8d34c38785dc73772242d2
- merge duplicated code into new ParseKey method
- convert some unsigned int to int to avoid warnings
- add local variable for current key in NotifyTouch to reduce clutter
Change-Id: I98ddbaca50d487c97ab6e98938df91ef03b9aed5
Ethan Yonker
that
Xuefer
Matt Mower
codelover
Vojtech Bocek
xiaolu
bigbiff