diff --git a/Makefile.in b/Makefile.in index 62fe01b6..c50da200 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.18.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2025 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -69,6 +69,8 @@ am__make_running_with_option = \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -181,8 +183,8 @@ distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ + find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \ + ; rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) @@ -212,14 +214,16 @@ am__relativize = \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz -GZIP_ENV = --best +GZIP_ENV = -9 DIST_TARGETS = dist-xz dist-gzip # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print +distcleancheck_listfiles = \ + find . \( -type f -a \! \ + \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ @@ -252,6 +256,7 @@ EGREP = @EGREP@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ +FILECMD = @FILECMD@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ @@ -351,8 +356,10 @@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -443,12 +450,12 @@ config.h: stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h + $(AM_V_at)rm -f stamp-h1 + $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ + $(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + $(AM_V_at)rm -f stamp-h1 + $(AM_V_at)touch $@ distclean-hdr: -rm -f config.h stamp-h1 @@ -569,12 +576,13 @@ cscopelist-am: $(am__tagged_files) distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" + $(AM_V_at)$(MKDIR_P) "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -647,6 +655,10 @@ dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) +dist-bzip3: distdir + tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3 + $(am__post_remove_distdir) + dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) @@ -687,9 +699,11 @@ dist dist-all: distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.bz3*) \ + bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ @@ -697,7 +711,7 @@ distcheck: dist *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ @@ -795,11 +809,11 @@ install-strip: mostlyclean-generic: clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + -$(am__rm_f) $(CLEANFILES) distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -879,9 +893,9 @@ uninstall-am: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ - dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ - distclean-generic distclean-hdr distclean-libtool \ + dist-all dist-bzip2 dist-bzip3 dist-gzip dist-hook dist-lzip \ + dist-shar dist-tarZ dist-xz dist-zip dist-zstd distcheck \ + distclean distclean-generic distclean-hdr distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ @@ -909,3 +923,10 @@ dist-hook: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.% diff --git a/aclocal.m4 b/aclocal.m4 index da88563d..2c2b0e83 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.16.5 -*- Autoconf -*- +# generated automatically by aclocal 1.18.1 -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2025 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,22 +14,23 @@ m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],, -[m4_warning([this file was generated for autoconf 2.71. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.72],, +[m4_warning([this file was generated for autoconf 2.72. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*- # -# Copyright (C) 1999-2008, 2011-2015 Free Software Foundation, Inc. +# Copyright (C) 1999-2008, 2011-2019, 2021-2024 Free Software +# Foundation, Inc. # Written by Thomas Tanner, 1999 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 20 LTDL_INIT +# serial 24 LTDL_INIT # LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE]) # ------------------------------------------ @@ -357,7 +358,7 @@ AC_CONFIG_COMMANDS_PRE([ if test -n "$_LT_LIBOBJS"; then # Remove the extension. _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' - for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do + for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | $SED "$_lt_sed_drop_objext" | sort -u`; do _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" done @@ -456,7 +457,8 @@ esac m4_ifdef([AM_CONDITIONAL], [AM_CONDITIONAL(INSTALL_LTDL, test no != "${enable_ltdl_install-no}") - AM_CONDITIONAL(CONVENIENCE_LTDL, test no != "${enable_ltdl_convenience-no}")]) + AM_CONDITIONAL(CONVENIENCE_LTDL, test no != "${enable_ltdl_convenience-no}") + AM_CONDITIONAL(LTARGZH_EXISTS, test -n "$LT_ARGZ_H")]) ])# _LT_ENABLE_INSTALL @@ -487,15 +489,12 @@ AC_CACHE_CHECK([whether deplibs are loaded by dlopen], ;; esac ;; - bitrig*) - lt_cv_sys_dlopen_deplibs=yes - ;; darwin*) # Assuming the user has installed a libdl from somewhere, this is true # If you are looking for one http://www.opendarwin.org/projects/dlcompat lt_cv_sys_dlopen_deplibs=yes ;; - freebsd* | dragonfly*) + freebsd* | dragonfly* | midnightbsd*) lt_cv_sys_dlopen_deplibs=yes ;; gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu) @@ -518,6 +517,9 @@ AC_CACHE_CHECK([whether deplibs are loaded by dlopen], # at 6.2 and later dlopen does load deplibs. lt_cv_sys_dlopen_deplibs=yes ;; + *-mlibc) + lt_cv_sys_dlopen_deplibs=yes + ;; netbsd* | netbsdelf*-gnu) lt_cv_sys_dlopen_deplibs=yes ;; @@ -734,7 +736,7 @@ darwin[[1567]].*) beos*) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | windows* | pw32*) AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" ;; @@ -782,7 +784,7 @@ AC_CACHE_CHECK([for _ prefix in compiled symbols], [lt_cv_sys_symbol_underscore=no cat > conftest.$ac_ext <<_LT_EOF void nm_test_func(){} -int main(){nm_test_func;return 0;} +int main(void){nm_test_func;return 0;} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. @@ -886,7 +888,7 @@ _LT_EOF # define RTLD_NOW 0 # endif #endif -int main () { +int main (void) { void *handle = dlopen ("`pwd`/$libname$libltdl_cv_shlibext", RTLD_GLOBAL|RTLD_NOW); int status = $libltdl_dlunknown; if (handle) { @@ -930,8 +932,8 @@ AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], []) -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 11 (pkg-config-0.29.1) +# pkg.m4 - Macros to locate and use pkg-config. -*- Autoconf -*- +# serial 12 (pkg-config-0.29.2) dnl Copyright © 2004 Scott James Remnant . dnl Copyright © 2012-2015 Dan Nicholson @@ -973,7 +975,7 @@ dnl dnl See the "Since" comment for each macro you use to see what version dnl of the macros you require. m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29.1]) +[m4_define([PKG_MACROS_VERSION], [0.29.2]) m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) ])dnl PKG_PREREQ @@ -1018,7 +1020,7 @@ dnl Check to see whether a particular set of modules exists. Similar to dnl PKG_CHECK_MODULES(), but does not set variables or print errors. dnl dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -dnl only at the first occurence in configure.ac, so if the first place +dnl only at the first occurrence in configure.ac, so if the first place dnl it's called might be skipped (such as if it is within an "if", you dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], @@ -1074,7 +1076,7 @@ AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no -AC_MSG_CHECKING([for $1]) +AC_MSG_CHECKING([for $2]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) @@ -1084,17 +1086,17 @@ and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) + AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - m4_default([$4], [AC_MSG_ERROR( + m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS @@ -1105,8 +1107,8 @@ installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -1116,10 +1118,10 @@ _PKG_TEXT To get pkg-config, see .])[]dnl ]) else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) - $3 + $3 fi[]dnl ])dnl PKG_CHECK_MODULES @@ -1274,7 +1276,7 @@ AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) ])dnl PKG_HAVE_DEFINE_WITH_MODULES -# Copyright (C) 2002-2021 Free Software Foundation, Inc. +# Copyright (C) 2002-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1286,10 +1288,10 @@ AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.16' +[am__api_version='1.18' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.16.5], [], +m4_if([$1], [1.18.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -1305,14 +1307,14 @@ m4_define([_AM_AUTOCONF_VERSION], []) # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.16.5])dnl +[AM_AUTOMAKE_VERSION([1.18.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1364,7 +1366,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2021 Free Software Foundation, Inc. +# Copyright (C) 1997-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1395,7 +1397,7 @@ AC_CONFIG_COMMANDS_PRE( Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1527,7 +1529,7 @@ AC_CACHE_CHECK([dependency style of $depcc], # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: + # When given -MP, icc 7.0 and 7.1 complain thus: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported @@ -1586,7 +1588,7 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1654,7 +1656,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1754,8 +1756,9 @@ AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_IF_OPTION([tar-v7], [_AM_PROG_TAR([v7])], + [_AM_PROG_TAR([ustar])])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], @@ -1788,7 +1791,7 @@ if test -z "$CSCOPE"; then fi AC_SUBST([CSCOPE]) -AC_REQUIRE([AM_SILENT_RULES])dnl +AC_REQUIRE([_AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. @@ -1796,47 +1799,9 @@ AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! +AC_REQUIRE([_AM_PROG_RM_F]) +AC_REQUIRE([_AM_PROG_XARGS_N]) -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. @@ -1869,7 +1834,7 @@ for _am_header in $config_headers :; do done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1890,7 +1855,7 @@ if test x"${install_sh+set}" != xset; then fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2021 Free Software Foundation, Inc. +# Copyright (C) 2003-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1912,7 +1877,7 @@ AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1947,7 +1912,7 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1990,7 +1955,7 @@ AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2021 Free Software Foundation, Inc. +# Copyright (C) 1997-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2024,7 +1989,7 @@ fi # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2053,7 +2018,7 @@ AC_DEFUN([_AM_SET_OPTIONS], AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2085,7 +2050,10 @@ AC_CACHE_CHECK( break fi done - rm -f core conftest* + # aligned with autoconf, so not including core; see bug#72225. + rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.$ac_objext \ + conftest.dSYM conftest1.$ac_ext conftest1.$ac_objext conftest1.dSYM \ + conftest2.$ac_ext conftest2.$ac_objext conftest2.dSYM unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. @@ -2100,7 +2068,23 @@ AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2022-2025 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_RM_F +# --------------- +# Check whether 'rm -f' without any arguments works. +# https://bugs.gnu.org/10828 +AC_DEFUN([_AM_PROG_RM_F], +[am__rm_f_notfound= +AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""']) +AC_SUBST(am__rm_f_notfound) +]) + +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2119,26 +2103,181 @@ AC_DEFUN([AM_RUN_LOG], # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# _AM_SLEEP_FRACTIONAL_SECONDS +# ---------------------------- +AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl +AC_CACHE_CHECK([whether sleep supports fractional seconds], + am_cv_sleep_fractional_seconds, [dnl +AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes], + [am_cv_sleep_fractional_seconds=no]) +])]) + +# _AM_FILESYSTEM_TIMESTAMP_RESOLUTION +# ----------------------------------- +# Determine the filesystem's resolution for file modification +# timestamps. The coarsest we know of is FAT, with a resolution +# of only two seconds, even with the most recent "exFAT" extensions. +# The finest (e.g. ext4 with large inodes, XFS, ZFS) is one +# nanosecond, matching clock_gettime. However, it is probably not +# possible to delay execution of a shell script for less than one +# millisecond, due to process creation overhead and scheduling +# granularity, so we don't check for anything finer than that. (See below.) +AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl +AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS]) +AC_CACHE_CHECK([filesystem timestamp resolution], + am_cv_filesystem_timestamp_resolution, [dnl +# Default to the worst case. +am_cv_filesystem_timestamp_resolution=2 + +# Only try to go finer than 1 sec if sleep can do it. +# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, +# - 1 sec is not much of a win compared to 2 sec, and +# - it takes 2 seconds to perform the test whether 1 sec works. +# +# Instead, just use the default 2s on platforms that have 1s resolution, +# accept the extra 1s delay when using $sleep in the Automake tests, in +# exchange for not incurring the 2s delay for running the test for all +# packages. +# +am_try_resolutions= +if test "$am_cv_sleep_fractional_seconds" = yes; then + # Even a millisecond often causes a bunch of false positives, + # so just try a hundredth of a second. The time saved between .001 and + # .01 is not terribly consequential. + am_try_resolutions="0.01 0.1 $am_try_resolutions" +fi + +# In order to catch current-generation FAT out, we must *modify* files +# that already exist; the *creation* timestamp is finer. Use names +# that make ls -t sort them differently when they have equal +# timestamps than when they have distinct timestamps, keeping +# in mind that ls -t prints the *newest* file first. +rm -f conftest.ts? +: > conftest.ts1 +: > conftest.ts2 +: > conftest.ts3 + +# Make sure ls -t actually works. Do 'set' in a subshell so we don't +# clobber the current shell's arguments. (Outer-level square brackets +# are removed by m4; they're present so that m4 does not expand +# ; be careful, easy to get confused.) +if ( + set X `[ls -t conftest.ts[12]]` && + { + test "$[]*" != "X conftest.ts1 conftest.ts2" || + test "$[]*" != "X conftest.ts2 conftest.ts1"; + } +); then :; else + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + _AS_ECHO_UNQUOTED( + ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""], + [AS_MESSAGE_LOG_FD]) + AC_MSG_FAILURE([ls -t produces unexpected output. +Make sure there is not a broken ls alias in your environment.]) +fi + +for am_try_res in $am_try_resolutions; do + # Any one fine-grained sleep might happen to cross the boundary + # between two values of a coarser actual resolution, but if we do + # two fine-grained sleeps in a row, at least one of them will fall + # entirely within a coarse interval. + echo alpha > conftest.ts1 + sleep $am_try_res + echo beta > conftest.ts2 + sleep $am_try_res + echo gamma > conftest.ts3 + + # We assume that 'ls -t' will make use of high-resolution + # timestamps if the operating system supports them at all. + if (set X `ls -t conftest.ts?` && + test "$[]2" = conftest.ts3 && + test "$[]3" = conftest.ts2 && + test "$[]4" = conftest.ts1); then + # + # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, + # because we don't need to test make. + make_ok=true + if test $am_try_res != 1; then + # But if we've succeeded so far with a subsecond resolution, we + # have one more thing to check: make. It can happen that + # everything else supports the subsecond mtimes, but make doesn't; + # notably on macOS, which ships make 3.81 from 2006 (the last one + # released under GPLv2). https://bugs.gnu.org/68808 + # + # We test $MAKE if it is defined in the environment, else "make". + # It might get overridden later, but our hope is that in practice + # it does not matter: it is the system "make" which is (by far) + # the most likely to be broken, whereas if the user overrides it, + # probably they did so with a better, or at least not worse, make. + # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html + # + # Create a Makefile (real tab character here): + rm -f conftest.mk + echo 'conftest.ts1: conftest.ts2' >conftest.mk + echo ' touch conftest.ts2' >>conftest.mk + # + # Now, running + # touch conftest.ts1; touch conftest.ts2; make + # should touch ts1 because ts2 is newer. This could happen by luck, + # but most often, it will fail if make's support is insufficient. So + # test for several consecutive successes. + # + # (We reuse conftest.ts[12] because we still want to modify existing + # files, not create new ones, per above.) + n=0 + make=${MAKE-make} + until test $n -eq 3; do + echo one > conftest.ts1 + sleep $am_try_res + echo two > conftest.ts2 # ts2 should now be newer than ts1 + if $make -f conftest.mk | grep 'up to date' >/dev/null; then + make_ok=false + break # out of $n loop + fi + n=`expr $n + 1` + done + fi + # + if $make_ok; then + # Everything we know to check worked out, so call this resolution good. + am_cv_filesystem_timestamp_resolution=$am_try_res + break # out of $am_try_res loop + fi + # Otherwise, we'll go on to check the next resolution. + fi +done +rm -f conftest.ts? +# (end _am_filesystem_timestamp_resolution) +])]) + # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) +[AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION]) +# This check should not be cached, as it may vary across builds of +# different projects. +AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_RESULT([no]) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_RESULT([no]) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac @@ -2147,49 +2286,40 @@ esac # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then +am_build_env_is_sane=no +am_has_slept=no +rm -f conftest.file +for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[]*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + test "$[]2" = conftest.file + ); then + am_build_env_is_sane=yes + break + fi + # Just in case. + sleep "$am_cv_filesystem_timestamp_resolution" + am_has_slept=yes +done - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! +AC_MSG_RESULT([$am_build_env_is_sane]) +if test "$am_build_env_is_sane" = no; then + AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -AC_MSG_RESULT([yes]) + # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & +AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl + ( sleep "$am_cv_filesystem_timestamp_resolution" ) & am_sleep_pid=$! -fi +]) AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then @@ -2200,18 +2330,18 @@ AC_CONFIG_COMMANDS_PRE( rm -f conftest.file ]) -# Copyright (C) 2009-2021 Free Software Foundation, Inc. +# Copyright (C) 2009-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl +# _AM_SILENT_RULES +# ---------------- +# Enable less verbose build rules support. +AC_DEFUN([_AM_SILENT_RULES], +[AM_DEFAULT_VERBOSITY=1 +AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) @@ -2219,11 +2349,6 @@ AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. @@ -2242,14 +2367,6 @@ am__doit: else am_cv_make_support_nested_variables=no fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl @@ -2258,9 +2375,37 @@ AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls +dnl to AM_SILENT_RULES to change the default value. +AC_CONFIG_COMMANDS_PRE([dnl +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; +esac +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +])dnl ]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or +# empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_REQUIRE([_AM_SILENT_RULES]) +AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])m4_newline +dnl We intentionally force a newline after the assignment, since a) nothing +dnl good can come of more text following, and b) that was the behavior +dnl before 1.17. See https://bugs.gnu.org/72267. +]) + +# Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2288,7 +2433,7 @@ fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2021 Free Software Foundation, Inc. +# Copyright (C) 2006-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2307,7 +2452,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2021 Free Software Foundation, Inc. +# Copyright (C) 2004-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -2353,15 +2498,19 @@ m4_if([$1], [v7], am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) + if test x$am_uid = xunknown; then + AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work]) + elif test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) else - AC_MSG_RESULT([no]) - _am_tools=none + AC_MSG_RESULT([no]) + _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) + if test x$gm_gid = xunknown; then + AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work]) + elif test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none @@ -2438,6 +2587,26 @@ AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR +# Copyright (C) 2022-2025 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_XARGS_N +# ---------------- +# Check whether 'xargs -n' works. It should work everywhere, so the fallback +# is not optimized at all as we never expect to use it. +AC_DEFUN([_AM_PROG_XARGS_N], +[AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl +AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 +3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])]) +AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl + am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }' +])dnl +AC_SUBST(am__xargs_n) +]) + m4_include([m4/gettext.m4]) m4_include([m4/iconv.m4]) m4_include([m4/intlmacosx.m4]) diff --git a/build-aux/compile b/build-aux/compile index df363c8f..02ff093c 100755 --- a/build-aux/compile +++ b/build-aux/compile @@ -1,9 +1,9 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2018-03-07.03; # UTC +scriptversion=2025-06-18.21; # UTC -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2025 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify @@ -37,11 +37,11 @@ IFS=" "" $nl" file_conv= -# func_file_conv build_file lazy +# func_file_conv build_file unneeded_conversions # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. +# type is listed in (the comma separated) UNNEEDED_CONVERSIONS, no +# conversion will take place. func_file_conv () { file=$1 @@ -51,9 +51,20 @@ func_file_conv () # lazily determine how to convert abs files case `uname -s` in MINGW*) - file_conv=mingw + if test -n "$MSYSTEM" && (cygpath --version) >/dev/null 2>&1; then + # MSYS2 environment. + file_conv=cygwin + else + # Original MinGW environment. + file_conv=mingw + fi ;; - CYGWIN* | MSYS*) + MSYS*) + # Old MSYS environment, or MSYS2 with 32-bit MSYS2 shell. + file_conv=cygwin + ;; + CYGWIN*) + # Cygwin environment. file_conv=cygwin ;; *) @@ -63,12 +74,14 @@ func_file_conv () fi case $file_conv/,$2, in *,$file_conv,*) + # This is the optimization mentioned above: + # If UNNEEDED_CONVERSIONS contains $file_conv, don't convert. ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; - cygwin/* | msys/*) - file=`cygpath -m "$file" || echo "$file"` + cygwin/*) + file=`cygpath -w "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` @@ -143,7 +156,7 @@ func_cl_wrapper () # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in - *.o | *.[oO][bB][jJ]) + *.o | *.lo | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift @@ -248,14 +261,17 @@ If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . +GNU Automake home page: . +General help using GNU software: . EOF exit $? ;; -v | --v*) - echo "compile $scriptversion" + echo "compile (GNU Automake) $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; @@ -340,9 +356,9 @@ exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/build-aux/config.guess b/build-aux/config.guess index 7f76b622..48a68460 100755 --- a/build-aux/config.guess +++ b/build-aux/config.guess @@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2022 Free Software Foundation, Inc. +# Copyright 1992-2024 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2022-01-09' +timestamp='2024-07-27' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -47,7 +47,7 @@ me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] -Output the configuration name of the system \`$me' is run on. +Output the configuration name of the system '$me' is run on. Options: -h, --help print this help, then exit @@ -60,13 +60,13 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2022 Free Software Foundation, Inc. +Copyright 1992-2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" -Try \`$me --help' for more information." +Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do @@ -102,8 +102,8 @@ GUESS= # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. +# Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still +# use 'HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. @@ -123,7 +123,7 @@ set_cc_for_build() { dummy=$tmp/dummy case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in ,,) echo "int x;" > "$dummy.c" - for driver in cc gcc c89 c99 ; do + for driver in cc gcc c17 c99 c89 ; do if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD=$driver break @@ -155,6 +155,9 @@ Linux|GNU|GNU/*) set_cc_for_build cat <<-EOF > "$dummy.c" + #if defined(__ANDROID__) + LIBC=android + #else #include #if defined(__UCLIBC__) LIBC=uclibc @@ -162,6 +165,8 @@ Linux|GNU|GNU/*) LIBC=dietlibc #elif defined(__GLIBC__) LIBC=gnu + #elif defined(__LLVM_LIBC__) + LIBC=llvm #else #include /* First heuristic to detect musl libc. */ @@ -169,6 +174,7 @@ Linux|GNU|GNU/*) LIBC=musl #endif #endif + #endif EOF cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` eval "$cc_set_libc" @@ -459,7 +465,7 @@ case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in UNAME_RELEASE=`uname -v` ;; esac - # Japanese Language versions have a version number like `4.1.3-JL'. + # Japanese Language versions have a version number like '4.1.3-JL'. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'` GUESS=sparc-sun-sunos$SUN_REL ;; @@ -628,7 +634,8 @@ EOF sed 's/^ //' << EOF > "$dummy.c" #include - main() + int + main () { if (!__power_pc()) exit(1); @@ -712,7 +719,8 @@ EOF #include #include - int main () + int + main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); @@ -904,7 +912,7 @@ EOF fi ;; *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` + UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in amd64) UNAME_PROCESSOR=x86_64 ;; @@ -966,11 +974,37 @@ EOF GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC ;; + x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-pc-managarm-mlibc" + ;; + *:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" + ;; *:Minix:*:*) GUESS=$UNAME_MACHINE-unknown-minix ;; aarch64:Linux:*:*) - GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + set_cc_for_build + CPU=$UNAME_MACHINE + LIBCABI=$LIBC + if test "$CC_FOR_BUILD" != no_compiler_found; then + ABI=64 + sed 's/^ //' << EOF > "$dummy.c" + #ifdef __ARM_EABI__ + #ifdef __ARM_PCS_VFP + ABI=eabihf + #else + ABI=eabi + #endif + #endif +EOF + cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` + eval "$cc_set_abi" + case $ABI in + eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;; + esac + fi + GUESS=$CPU-unknown-linux-$LIBCABI ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be @@ -1036,7 +1070,16 @@ EOF k1om:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; - loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*) + kvx:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + kvx:cos:*:*) + GUESS=$UNAME_MACHINE-unknown-cos + ;; + kvx:mbr:*:*) + GUESS=$UNAME_MACHINE-unknown-mbr + ;; + loongarch32:Linux:*:* | loongarch64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m32r*:Linux:*:*) @@ -1151,16 +1194,27 @@ EOF ;; x86_64:Linux:*:*) set_cc_for_build + CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then - if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_X32 >/dev/null - then - LIBCABI=${LIBC}x32 - fi + ABI=64 + sed 's/^ //' << EOF > "$dummy.c" + #ifdef __i386__ + ABI=x86 + #else + #ifdef __ILP32__ + ABI=x32 + #endif + #endif +EOF + cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` + eval "$cc_set_abi" + case $ABI in + x86) CPU=i686 ;; + x32) LIBCABI=${LIBC}x32 ;; + esac fi - GUESS=$UNAME_MACHINE-pc-linux-$LIBCABI + GUESS=$CPU-pc-linux-$LIBCABI ;; xtensa*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC @@ -1180,7 +1234,7 @@ EOF GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION ;; i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility + # If we were able to find 'uname', then EMX Unix compatibility # is probably installed. GUESS=$UNAME_MACHINE-pc-os2-emx ;; @@ -1321,7 +1375,7 @@ EOF GUESS=ns32k-sni-sysv fi ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort # says GUESS=i586-unisys-sysv4 ;; @@ -1367,8 +1421,11 @@ EOF BePC:Haiku:*:*) # Haiku running on Intel PC compatible. GUESS=i586-pc-haiku ;; - x86_64:Haiku:*:*) - GUESS=x86_64-unknown-haiku + ppc:Haiku:*:*) # Haiku running on Apple PowerPC + GUESS=powerpc-apple-haiku + ;; + *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) + GUESS=$UNAME_MACHINE-unknown-haiku ;; SX-4:SUPER-UX:*:*) GUESS=sx4-nec-superux$UNAME_RELEASE @@ -1540,6 +1597,9 @@ EOF *:Unleashed:*:*) GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE ;; + *:Ironclad:*:*) + GUESS=$UNAME_MACHINE-unknown-ironclad + ;; esac # Do we have a guess based on uname results? @@ -1563,6 +1623,7 @@ cat > "$dummy.c" <." version="\ GNU config.sub ($timestamp) -Copyright 1992-2022 Free Software Foundation, Inc. +Copyright 1992-2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" -Try \`$me --help' for more information." +Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do @@ -120,7 +120,6 @@ case $# in esac # Split fields of configuration type -# shellcheck disable=SC2162 saved_IFS=$IFS IFS="-" read field1 field2 field3 field4 <&2 + echo "Invalid configuration '$1': more than four components" >&2 exit 1 ;; *-*-*-*) @@ -142,10 +141,21 @@ case $1 in # parts maybe_os=$field2-$field3 case $maybe_os in - nto-qnx* | linux-* | uclinux-uclibc* \ - | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ - | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ - | storm-chaos* | os2-emx* | rtmk-nova*) + cloudabi*-eabi* \ + | kfreebsd*-gnu* \ + | knetbsd*-gnu* \ + | kopensolaris*-gnu* \ + | linux-* \ + | managarm-* \ + | netbsd*-eabi* \ + | netbsd*-gnu* \ + | nto-qnx* \ + | os2-emx* \ + | rtmk-nova* \ + | storm-chaos* \ + | uclinux-gnu* \ + | uclinux-uclibc* \ + | windows-* ) basic_machine=$field1 basic_os=$maybe_os ;; @@ -160,8 +170,12 @@ case $1 in esac ;; *-*) - # A lone config we happen to match not fitting any pattern case $field1-$field2 in + # Shorthands that happen to contain a single dash + convex-c[12] | convex-c3[248]) + basic_machine=$field2-convex + basic_os= + ;; decstation-3100) basic_machine=mips-dec basic_os= @@ -169,28 +183,88 @@ case $1 in *-*) # Second component is usually, but not always the OS case $field2 in - # Prevent following clause from handling this valid os + # Do not treat sunos as a manufacturer sun*os*) basic_machine=$field1 basic_os=$field2 ;; + # Manufacturers + 3100* \ + | 32* \ + | 3300* \ + | 3600* \ + | 7300* \ + | acorn \ + | altos* \ + | apollo \ + | apple \ + | atari \ + | att* \ + | axis \ + | be \ + | bull \ + | cbm \ + | ccur \ + | cisco \ + | commodore \ + | convergent* \ + | convex* \ + | cray \ + | crds \ + | dec* \ + | delta* \ + | dg \ + | digital \ + | dolphin \ + | encore* \ + | gould \ + | harris \ + | highlevel \ + | hitachi* \ + | hp \ + | ibm* \ + | intergraph \ + | isi* \ + | knuth \ + | masscomp \ + | microblaze* \ + | mips* \ + | motorola* \ + | ncr* \ + | news \ + | next \ + | ns \ + | oki \ + | omron* \ + | pc533* \ + | rebel \ + | rom68k \ + | rombug \ + | semi \ + | sequent* \ + | siemens \ + | sgi* \ + | siemens \ + | sim \ + | sni \ + | sony* \ + | stratus \ + | sun \ + | sun[234]* \ + | tektronix \ + | tti* \ + | ultra \ + | unicom* \ + | wec \ + | winbond \ + | wrs) + basic_machine=$field1-$field2 + basic_os= + ;; zephyr*) basic_machine=$field1-unknown basic_os=$field2 ;; - # Manufacturers - dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ - | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ - | unicom* | ibm* | next | hp | isi* | apollo | altos* \ - | convergent* | ncr* | news | 32* | 3600* | 3100* \ - | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ - | ultra | tti* | harris | dolphin | highlevel | gould \ - | cbm | ns | masscomp | apple | axis | knuth | cray \ - | microblaze* | sim | cisco \ - | oki | wec | wrs | winbond) - basic_machine=$field1-$field2 - basic_os= - ;; *) basic_machine=$field1 basic_os=$field2 @@ -271,26 +345,6 @@ case $1 in basic_machine=arm-unknown basic_os=cegcc ;; - convex-c1) - basic_machine=c1-convex - basic_os=bsd - ;; - convex-c2) - basic_machine=c2-convex - basic_os=bsd - ;; - convex-c32) - basic_machine=c32-convex - basic_os=bsd - ;; - convex-c34) - basic_machine=c34-convex - basic_os=bsd - ;; - convex-c38) - basic_machine=c38-convex - basic_os=bsd - ;; cray) basic_machine=j90-cray basic_os=unicos @@ -713,15 +767,26 @@ case $basic_machine in vendor=dec basic_os=tops20 ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) + delta | 3300 | delta-motorola | 3300-motorola | motorola-delta | motorola-3300) cpu=m68k vendor=motorola ;; - dpx2*) + # This used to be dpx2*, but that gets the RS6000-based + # DPX/20 and the x86-based DPX/2-100 wrong. See + # https://oldskool.silicium.org/stations/bull_dpx20.htm + # https://www.feb-patrimoine.com/english/bull_dpx2.htm + # https://www.feb-patrimoine.com/english/unix_and_bull.htm + dpx2 | dpx2[23]00 | dpx2[23]xx) cpu=m68k vendor=bull - basic_os=sysv3 + ;; + dpx2100 | dpx21xx) + cpu=i386 + vendor=bull + ;; + dpx20) + cpu=rs6000 + vendor=bull ;; encore | umax | mmax) cpu=ns32k @@ -836,18 +901,6 @@ case $basic_machine in next | m*-next) cpu=m68k vendor=next - case $basic_os in - openstep*) - ;; - nextstep*) - ;; - ns2*) - basic_os=nextstep2 - ;; - *) - basic_os=nextstep3 - ;; - esac ;; np1) cpu=np1 @@ -936,14 +989,13 @@ case $basic_machine in ;; *-*) - # shellcheck disable=SC2162 saved_IFS=$IFS IFS="-" read cpu vendor <&2 + echo "Invalid configuration '$1': machine '$cpu-$vendor' not recognized" 1>&2 exit 1 ;; esac @@ -1306,11 +1491,12 @@ esac # Decode manufacturer-specific aliases for certain operating systems. -if test x$basic_os != x +if test x"$basic_os" != x then # First recognize some ad-hoc cases, or perhaps split kernel-os, or else just # set os. +obj= case $basic_os in gnu/linux*) kernel=linux @@ -1325,7 +1511,6 @@ case $basic_os in os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'` ;; *-*) - # shellcheck disable=SC2162 saved_IFS=$IFS IFS="-" read kernel os <&2 + fi + ;; *) - echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2 + echo "Invalid configuration '$1': OS '$os' not recognized" 1>&2 + exit 1 + ;; +esac + +case $obj in + aout* | coff* | elf* | pe*) + ;; + '') + # empty is fine + ;; + *) + echo "Invalid configuration '$1': Machine code format '$obj' not recognized" 1>&2 + exit 1 + ;; +esac + +# Here we handle the constraint that a (synthetic) cpu and os are +# valid only in combination with each other and nowhere else. +case $cpu-$os in + # The "javascript-unknown-ghcjs" triple is used by GHC; we + # accept it here in order to tolerate that, but reject any + # variations. + javascript-ghcjs) + ;; + javascript-* | *-ghcjs) + echo "Invalid configuration '$1': cpu '$cpu' is not valid with os '$os$obj'" 1>&2 exit 1 ;; esac # As a final step for OS-related things, validate the OS-kernel combination # (given a valid OS), if there is a kernel. -case $kernel-$os in - linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \ - | linux-musl* | linux-relibc* | linux-uclibc* ) +case $kernel-$os-$obj in + linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \ + | linux-mlibc*- | linux-musl*- | linux-newlib*- \ + | linux-relibc*- | linux-uclibc*- | linux-ohos*- ) ;; - uclinux-uclibc* ) + uclinux-uclibc*- | uclinux-gnu*- ) ;; - -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* ) + managarm-mlibc*- | managarm-kernel*- ) + ;; + windows*-msvc*-) + ;; + -dietlibc*- | -llvm*- | -mlibc*- | -musl*- | -newlib*- | -relibc*- \ + | -uclibc*- ) # These are just libc implementations, not actual OSes, and thus # require a kernel. - echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2 + echo "Invalid configuration '$1': libc '$os' needs explicit kernel." 1>&2 exit 1 ;; - kfreebsd*-gnu* | kopensolaris*-gnu*) + -kernel*- ) + echo "Invalid configuration '$1': '$os' needs explicit kernel." 1>&2 + exit 1 ;; - vxworks-simlinux | vxworks-simwindows | vxworks-spe) + *-kernel*- ) + echo "Invalid configuration '$1': '$kernel' does not support '$os'." 1>&2 + exit 1 ;; - nto-qnx*) + *-msvc*- ) + echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2 + exit 1 ;; - os2-emx) + kfreebsd*-gnu*- | knetbsd*-gnu*- | netbsd*-gnu*- | kopensolaris*-gnu*-) ;; - *-eabi* | *-gnueabi*) + vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-) ;; - -*) + nto-qnx*-) + ;; + os2-emx-) + ;; + rtmk-nova-) + ;; + *-eabi*- | *-gnueabi*-) + ;; + none--*) + # None (no kernel, i.e. freestanding / bare metal), + # can be paired with an machine code file format + ;; + -*-) # Blank kernel with real OS is always fine. ;; - *-*) - echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2 + --*) + # Blank kernel and OS with real machine code file format is always fine. + ;; + *-*-*) + echo "Invalid configuration '$1': Kernel '$kernel' not known to work with OS '$os'." 1>&2 exit 1 ;; esac @@ -1809,7 +2273,7 @@ case $vendor in *-riscix*) vendor=acorn ;; - *-sunos*) + *-sunos* | *-solaris*) vendor=sun ;; *-cnk* | *-aix*) @@ -1879,7 +2343,7 @@ case $vendor in ;; esac -echo "$cpu-$vendor-${kernel:+$kernel-}$os" +echo "$cpu-$vendor${kernel:+-$kernel}${os:+-$os}${obj:+-$obj}" exit # Local variables: diff --git a/build-aux/depcomp b/build-aux/depcomp index 715e3431..9f6725b9 100755 --- a/build-aux/depcomp +++ b/build-aux/depcomp @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2018-03-07.03; # UTC +scriptversion=2025-06-18.21; # UTC -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -47,11 +47,13 @@ Environment variables: libtool Whether libtool is used (yes/no). Report bugs to . +GNU Automake home page: . +General help using GNU software: . EOF exit $? ;; -v | --v*) - echo "depcomp $scriptversion" + echo "depcomp (GNU Automake) $scriptversion" exit $? ;; esac @@ -113,7 +115,6 @@ nl=' # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then @@ -128,7 +129,7 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" -# Avoid interferences from the environment. +# Avoid interference from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We @@ -198,8 +199,8 @@ gcc3) ;; gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## Note that this doesn't just cater to obsolete pre-3.x GCC compilers. +## but also to in-use compilers like IBM xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: @@ -783,9 +784,9 @@ exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/build-aux/install-sh b/build-aux/install-sh index ec298b53..1d8d9669 100755 --- a/build-aux/install-sh +++ b/build-aux/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2020-11-14.01; # UTC +scriptversion=2025-06-18.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -124,9 +124,9 @@ it's up to you to specify -f if you want it. If -S is not specified, no backups are attempted. -Email bug reports to bug-automake@gnu.org. -Automake home page: https://www.gnu.org/software/automake/ -" +Report bugs to . +GNU Automake home page: . +General help using GNU software: ." while test $# -ne 0; do case $1 in @@ -170,7 +170,7 @@ while test $# -ne 0; do -T) is_target_a_directory=never;; - --version) echo "$0 $scriptversion"; exit $?;; + --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;; --) shift break;; @@ -345,7 +345,7 @@ do ' 0 # Because "mkdir -p" follows existing symlinks and we likely work - # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directly in world-writable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p'. if (umask $mkdir_umask && @@ -353,7 +353,7 @@ do exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. + # Check for POSIX incompatibility with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. @@ -533,9 +533,9 @@ do done # Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh index 540a92ab..22edd140 100755 --- a/build-aux/ltmain.sh +++ b/build-aux/ltmain.sh @@ -1,12 +1,12 @@ -#! /bin/sh +#! /usr/bin/env sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2014-01-03.01 +## by inline-source v2019-02-19.15 -# libtool (GNU libtool) 2.4.6 +# libtool (GNU libtool) 2.5.4 # Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996-2015 Free Software Foundation, Inc. +# Copyright (C) 1996-2019, 2021-2024 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -31,8 +31,8 @@ PROGRAM=libtool PACKAGE=libtool -VERSION="2.4.6 Debian-2.4.6-15build2" -package_revision=2.4.6 +VERSION="2.5.4 Debian-2.5.4-9" +package_revision=2.5.4 ## ------ ## @@ -64,34 +64,25 @@ package_revision=2.4.6 # libraries, which are installed to $pkgauxdir. # Set a version string for this script. -scriptversion=2015-01-20.17; # UTC +scriptversion=2024-12-01.17; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 -# Copyright (C) 2004-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# This is free software. There is NO warranty; not even for +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Copyright (C) 2004-2019, 2021, 2023-2024 Bootstrap Authors +# +# This file is dual licensed under the terms of the MIT license +# , and GPL version 2 or later +# . You must apply one of +# these licenses when using or redistributing this software or any of +# the files within it. See the URLs above, or the file `LICENSE` +# included in the Bootstrap distribution for the full license texts. -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. - -# As a special exception to the GNU General Public License, if you distribute -# this file as part of a program or library that is built using GNU Libtool, -# you may include this file under the same distribution terms that you use -# for the rest of that program. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. +# Please report bugs or propose patches to: +# ## ------ ## @@ -139,9 +130,12 @@ do _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# These NLS vars are set unconditionally (bootstrap issue #24). Unset those +# in case the environment reset is needed later and the $save_* variant is not +# defined (see the code above). +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL # Make sure IFS has a sensible default sp=' ' @@ -149,7 +143,7 @@ nl=' ' IFS="$sp $nl" -# There are apparently some retarded systems that use ';' as a PATH separator! +# There are apparently some systems that use ';' as a PATH separator! if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { @@ -159,6 +153,26 @@ if test "${PATH_SEPARATOR+set}" != set; then fi +# func_unset VAR +# -------------- +# Portably unset VAR. +# In some shells, an 'unset VAR' statement leaves a non-zero return +# status if VAR is already unset, which might be problematic if the +# statement is used at the end of a function (thus poisoning its return +# value) or when 'set -e' is active (causing even a spurious abort of +# the script in this case). +func_unset () +{ + { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; } +} + + +# Make sure CDPATH doesn't cause `cd` commands to output the target dir. +func_unset CDPATH + +# Make sure ${,E,F}GREP behave sanely. +func_unset GREP_OPTIONS + ## ------------------------- ## ## Locate command utilities. ## @@ -259,7 +273,7 @@ test -z "$SED" && { rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin" rm -f conftest.sed SED=$func_path_progs_result } @@ -295,7 +309,7 @@ test -z "$GREP" && { rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin" GREP=$func_path_progs_result } @@ -360,6 +374,35 @@ sed_double_backslash="\ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g s/\n//g" +# require_check_ifs_backslash +# --------------------------- +# Check if we can use backslash as IFS='\' separator, and set +# $check_ifs_backshlash_broken to ':' or 'false'. +require_check_ifs_backslash=func_require_check_ifs_backslash +func_require_check_ifs_backslash () +{ + _G_save_IFS=$IFS + IFS='\' + _G_check_ifs_backshlash='a\\b' + for _G_i in $_G_check_ifs_backshlash + do + case $_G_i in + a) + check_ifs_backshlash_broken=false + ;; + '') + break + ;; + *) + check_ifs_backshlash_broken=: + break + ;; + esac + done + IFS=$_G_save_IFS + require_check_ifs_backslash=: +} + ## ----------------- ## ## Global variables. ## @@ -529,27 +572,16 @@ func_require_term_colors () # --------------------- # Append VALUE onto the existing contents of VAR. - # We should try to minimise forks, especially on Windows where they are - # unreasonably slow, so skip the feature probes when bash or zsh are - # being used: - if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then - : ${_G_HAVE_ARITH_OP="yes"} - : ${_G_HAVE_XSI_OPS="yes"} - # The += operator was introduced in bash 3.1 - case $BASH_VERSION in - [12].* | 3.0 | 3.0*) ;; - *) - : ${_G_HAVE_PLUSEQ_OP="yes"} - ;; - esac - fi # _G_HAVE_PLUSEQ_OP # Can be empty, in which case the shell is probed, "yes" if += is - # useable or anything else if it does not work. - test -z "$_G_HAVE_PLUSEQ_OP" \ - && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ - && _G_HAVE_PLUSEQ_OP=yes + # usable or anything else if it does not work. +if test -z "$_G_HAVE_PLUSEQ_OP" && \ + __PLUSEQ_TEST="a" && \ + __PLUSEQ_TEST+=" b" 2>/dev/null && \ + test "a b" = "$__PLUSEQ_TEST"; then + _G_HAVE_PLUSEQ_OP=yes +fi if test yes = "$_G_HAVE_PLUSEQ_OP" then @@ -580,16 +612,16 @@ if test yes = "$_G_HAVE_PLUSEQ_OP"; then { $debug_cmd - func_quote_for_eval "$2" - eval "$1+=\\ \$func_quote_for_eval_result" + func_quote_arg pretty "$2" + eval "$1+=\\ \$func_quote_arg_result" }' else func_append_quoted () { $debug_cmd - func_quote_for_eval "$2" - eval "$1=\$$1\\ \$func_quote_for_eval_result" + func_quote_arg pretty "$2" + eval "$1=\$$1\\ \$func_quote_arg_result" } fi @@ -696,7 +728,7 @@ eval 'func_dirname () # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. -# value retuned in "$func_basename_result" +# value returned in "$func_basename_result" # For efficiency, we do not delegate to the functions above but instead # duplicate the functionality here. eval 'func_dirname_and_basename () @@ -854,7 +886,7 @@ func_mkdir_p () # While some portion of DIR does not yet exist... while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. + # list in case some portion of path contains whitespace. _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done @@ -1091,85 +1123,203 @@ func_relative_path () } -# func_quote_for_eval ARG... -# -------------------------- -# Aesthetically quote ARGs to be evaled later. -# This function returns two values: -# i) func_quote_for_eval_result -# double-quoted, suitable for a subsequent eval -# ii) func_quote_for_eval_unquoted_result -# has all characters that are still active within double -# quotes backslashified. -func_quote_for_eval () +# func_quote_portable EVAL ARG +# ---------------------------- +# Internal function to portably implement func_quote_arg. Note that we still +# keep attention to performance here so we as much as possible try to avoid +# calling sed binary (so far O(N) complexity as long as func_append is O(1)). +func_quote_portable () { $debug_cmd - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do - case $1 in + $require_check_ifs_backslash + + func_quote_portable_result=$2 + + # one-time-loop (easy break) + while true + do + if $1; then + func_quote_portable_result=`$ECHO "$2" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` + break + fi + + # Quote for eval. + case $func_quote_portable_result in *[\\\`\"\$]*) - _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; - *) - _G_unquoted_arg=$1 ;; - esac - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else - func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" - fi + # Fallback to sed for $func_check_bs_ifs_broken=:, or when the string + # contains the shell wildcard characters. + case $check_ifs_backshlash_broken$func_quote_portable_result in + :*|*[\[\*\?]*) + func_quote_portable_result=`$ECHO "$func_quote_portable_result" \ + | $SED "$sed_quote_subst"` + break + ;; + esac - case $_G_unquoted_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_quoted_arg=\"$_G_unquoted_arg\" + func_quote_portable_old_IFS=$IFS + for _G_char in '\' '`' '"' '$' + do + # STATE($1) PREV($2) SEPARATOR($3) + set start "" "" + func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy + IFS=$_G_char + for _G_part in $func_quote_portable_result + do + case $1 in + quote) + func_append func_quote_portable_result "$3$2" + set quote "$_G_part" "\\$_G_char" + ;; + start) + set first "" "" + func_quote_portable_result= + ;; + first) + set quote "$_G_part" "" + ;; + esac + done + done + IFS=$func_quote_portable_old_IFS ;; - *) - _G_quoted_arg=$_G_unquoted_arg - ;; + *) ;; esac - - if test -n "$func_quote_for_eval_result"; then - func_append func_quote_for_eval_result " $_G_quoted_arg" - else - func_append func_quote_for_eval_result "$_G_quoted_arg" - fi - shift + break done + + func_quote_portable_unquoted_result=$func_quote_portable_result + case $func_quote_portable_result in + # double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # many bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_portable_result=\"$func_quote_portable_result\" + ;; + esac } -# func_quote_for_expand ARG -# ------------------------- -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () +# func_quotefast_eval ARG +# ----------------------- +# Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG', +# but optimized for speed. Result is stored in $func_quotefast_eval. +if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then + printf -v _GL_test_printf_tilde %q '~' + if test '\~' = "$_GL_test_printf_tilde"; then + func_quotefast_eval () + { + printf -v func_quotefast_eval_result %q "$1" + } + else + # Broken older Bash implementations. Make those faster too if possible. + func_quotefast_eval () + { + case $1 in + '~'*) + func_quote_portable false "$1" + func_quotefast_eval_result=$func_quote_portable_result + ;; + *) + printf -v func_quotefast_eval_result %q "$1" + ;; + esac + } + fi +else + func_quotefast_eval () + { + func_quote_portable false "$1" + func_quotefast_eval_result=$func_quote_portable_result + } +fi + + +# func_quote_arg MODEs ARG +# ------------------------ +# Quote one ARG to be evaled later. MODEs argument may contain zero or more +# specifiers listed below separated by ',' character. This function returns two +# values: +# i) func_quote_arg_result +# double-quoted (when needed), suitable for a subsequent eval +# ii) func_quote_arg_unquoted_result +# has all characters that are still active within double +# quotes backslashified. Available only if 'unquoted' is specified. +# +# Available modes: +# ---------------- +# 'eval' (default) +# - escape shell special characters +# 'expand' +# - the same as 'eval'; but do not quote variable references +# 'pretty' +# - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might +# be used later in func_quote to get output like: 'echo "a b"' instead +# of 'echo a\ b'. This is slower than default on some shells. +# 'unquoted' +# - produce also $func_quote_arg_unquoted_result which does not contain +# wrapping double-quotes. +# +# Examples for 'func_quote_arg pretty,unquoted string': +# +# string | *_result | *_unquoted_result +# ------------+-----------------------+------------------- +# " | \" | \" +# a b | "a b" | a b +# "a b" | "\"a b\"" | \"a b\" +# * | "*" | * +# z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\" +# +# Examples for 'func_quote_arg pretty,unquoted,expand string': +# +# string | *_result | *_unquoted_result +# --------------+---------------------+-------------------- +# z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\" +func_quote_arg () { - $debug_cmd - - case $1 in - *[\\\`\"]*) - _G_arg=`$ECHO "$1" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; - *) - _G_arg=$1 ;; - esac - - case $_G_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_arg=\"$_G_arg\" + _G_quote_expand=false + case ,$1, in + *,expand,*) + _G_quote_expand=: ;; esac - func_quote_for_expand_result=$_G_arg + case ,$1, in + *,pretty,*|*,expand,*|*,unquoted,*) + func_quote_portable $_G_quote_expand "$2" + func_quote_arg_result=$func_quote_portable_result + func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result + ;; + *) + # Faster quote-for-eval for some shells. + func_quotefast_eval "$2" + func_quote_arg_result=$func_quotefast_eval_result + ;; + esac +} + + +# func_quote MODEs ARGs... +# ------------------------ +# Quote all ARGs to be evaled later and join them into single command. See +# func_quote_arg's description for more info. +func_quote () +{ + $debug_cmd + _G_func_quote_mode=$1 ; shift + func_quote_result= + while test 0 -lt $#; do + func_quote_arg "$_G_func_quote_mode" "$1" + if test -n "$func_quote_result"; then + func_append func_quote_result " $func_quote_arg_result" + else + func_append func_quote_result "$func_quote_arg_result" + fi + shift + done } @@ -1215,8 +1365,8 @@ func_show_eval () _G_cmd=$1 _G_fail_exp=${2-':'} - func_quote_for_expand "$_G_cmd" - eval "func_notquiet $func_quote_for_expand_result" + func_quote_arg pretty,expand "$_G_cmd" + eval "func_notquiet $func_quote_arg_result" $opt_dry_run || { eval "$_G_cmd" @@ -1241,8 +1391,8 @@ func_show_eval_locale () _G_fail_exp=${2-':'} $opt_quiet || { - func_quote_for_expand "$_G_cmd" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$_G_cmd" + eval "func_echo $func_quote_arg_result" } $opt_dry_run || { @@ -1369,30 +1519,26 @@ func_lt_ver () # End: #! /bin/sh -# Set a version string for this script. -scriptversion=2015-10-07.11; # UTC - # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 -# Copyright (C) 2010-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# This is free software. There is NO warranty; not even for +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Copyright (C) 2010-2019, 2021, 2023-2024 Bootstrap Authors +# +# This file is dual licensed under the terms of the MIT license +# , and GPL version 2 or later +# . You must apply one of +# these licenses when using or redistributing this software or any of +# the files within it. See the URLs above, or the file `LICENSE` +# included in the Bootstrap distribution for the full license texts. -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. +# Please report bugs or propose patches to: +# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. +# Set a version string for this script. +scriptversion=2019-02-19.15; # UTC ## ------ ## @@ -1415,7 +1561,7 @@ scriptversion=2015-10-07.11; # UTC # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# warranty; '. +# starting with '# Written by ' and ending with '# Copyright'. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the @@ -1427,7 +1573,7 @@ scriptversion=2015-10-07.11; # UTC # to display verbose messages only when your user has specified # '--verbose'. # -# After sourcing this file, you can plug processing for additional +# After sourcing this file, you can plug in processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. @@ -1476,8 +1622,8 @@ fatal_help="Try '\$progname --help' for more information." ## ------------------------- ## # This section contains functions for adding, removing, and running hooks -# to the main code. A hook is just a named list of of function, that can -# be run in order later on. +# in the main code. A hook is just a list of function names that can be +# run in order later on. # func_hookable FUNC_NAME # ----------------------- @@ -1510,7 +1656,8 @@ func_add_hook () # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ -# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +# Remove HOOK_FUNC from the list of hook functions to be called by +# FUNC_NAME. func_remove_hook () { $debug_cmd @@ -1519,10 +1666,28 @@ func_remove_hook () } +# func_propagate_result FUNC_NAME_A FUNC_NAME_B +# --------------------------------------------- +# If the *_result variable of FUNC_NAME_A _is set_, assign its value to +# *_result variable of FUNC_NAME_B. +func_propagate_result () +{ + $debug_cmd + + func_propagate_result_result=: + if eval "test \"\${${1}_result+set}\" = set" + then + eval "${2}_result=\$${1}_result" + else + func_propagate_result_result=false + fi +} + + # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. -# It is assumed that the list of hook functions contains nothing more +# It's assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. @@ -1534,22 +1699,19 @@ func_run_hooks () case " $hookable_fns " in *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook funcions.n" ;; + *) func_fatal_error "'$1' does not support hook functions." ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do - if eval $_G_hook '"$@"'; then - # store returned options list back into positional - # parameters for next 'cmd' execution. - eval _G_hook_result=\$${_G_hook}_result - eval set dummy "$_G_hook_result"; shift - _G_rc_run_hooks=: + func_unset "${_G_hook}_result" + eval $_G_hook '${1+"$@"}' + func_propagate_result $_G_hook func_run_hooks + if $func_propagate_result_result; then + eval set dummy "$func_run_hooks_result"; shift fi done - - $_G_rc_run_hooks && func_run_hooks_result=$_G_hook_result } @@ -1559,14 +1721,16 @@ func_run_hooks () ## --------------- ## # In order to add your own option parsing hooks, you must accept the -# full positional parameter list in your hook function, you may remove/edit -# any options that you action, and then pass back the remaining unprocessed -# options in '_result', escaped suitably for -# 'eval'. In this case you also must return $EXIT_SUCCESS to let the -# hook's caller know that it should pay attention to -# '_result'. Returning $EXIT_FAILURE signalizes that -# arguments are left untouched by the hook and therefore caller will ignore the -# result variable. +# full positional parameter list from your hook function. You may remove +# or edit any options that you action, and then pass back the remaining +# unprocessed options in '_result', escaped +# suitably for 'eval'. +# +# The '_result' variable is automatically unset +# before your hook gets called; for best performance, only set the +# *_result variable when necessary (i.e. don't call the 'func_quote' +# function unnecessarily because it can be an expensive operation on some +# machines). # # Like this: # @@ -1578,11 +1742,8 @@ func_run_hooks () # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' -# # No change in '$@' (ignored completely by this hook). There is -# # no need to do the equivalent (but slower) action: -# # func_quote_for_eval ${1+"$@"} -# # my_options_prep_result=$func_quote_for_eval_result -# false +# # No change in '$@' (ignored completely by this hook). Leave +# # my_options_prep_result variable intact. # } # func_add_hook func_options_prep my_options_prep # @@ -1593,7 +1754,7 @@ func_run_hooks () # # args_changed=false # -# # Note that for efficiency, we parse as many options as we can +# # Note that, for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do @@ -1610,18 +1771,17 @@ func_run_hooks () # args_changed=: # ;; # *) # Make sure the first unrecognised option "$_G_opt" -# # is added back to "$@", we could need that later -# # if $args_changed is true. +# # is added back to "$@" in case we need it later, +# # if $args_changed was set to 'true'. # set dummy "$_G_opt" ${1+"$@"}; shift; break ;; # esac # done # +# # Only call 'func_quote' here if we processed at least one argument. # if $args_changed; then -# func_quote_for_eval ${1+"$@"} -# my_silent_option_result=$func_quote_for_eval_result +# func_quote eval ${1+"$@"} +# my_silent_option_result=$func_quote_result # fi -# -# $args_changed # } # func_add_hook func_parse_options my_silent_option # @@ -1632,8 +1792,6 @@ func_run_hooks () # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." -# -# false # } # func_add_hook func_validate_options my_option_validation # @@ -1649,13 +1807,8 @@ func_options_finish () { $debug_cmd - _G_func_options_finish_exit=false - if func_run_hooks func_options ${1+"$@"}; then - func_options_finish_result=$func_run_hooks_result - _G_func_options_finish_exit=: - fi - - $_G_func_options_finish_exit + func_run_hooks func_options ${1+"$@"} + func_propagate_result func_run_hooks func_options_finish } @@ -1668,28 +1821,27 @@ func_options () { $debug_cmd - _G_rc_options=false + _G_options_quoted=false for my_func in options_prep parse_options validate_options options_finish do - if eval func_$my_func '${1+"$@"}'; then - eval _G_res_var='$'"func_${my_func}_result" - eval set dummy "$_G_res_var" ; shift - _G_rc_options=: + func_unset func_${my_func}_result + func_unset func_run_hooks_result + eval func_$my_func '${1+"$@"}' + func_propagate_result func_$my_func func_options + if $func_propagate_result_result; then + eval set dummy "$func_options_result"; shift + _G_options_quoted=: fi done - # Save modified positional parameters for caller. As a top-level - # options-parser function we always need to set the 'func_options_result' - # variable (regardless the $_G_rc_options value). - if $_G_rc_options; then - func_options_result=$_G_res_var - else - func_quote_for_eval ${1+"$@"} - func_options_result=$func_quote_for_eval_result - fi - - $_G_rc_options + $_G_options_quoted || { + # As we (func_options) are top-level options-parser function and + # nobody quoted "$@" for us yet, we need to do it explicitly for + # caller. + func_quote eval ${1+"$@"} + func_options_result=$func_quote_result + } } @@ -1699,8 +1851,7 @@ func_options () # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and # needs to propagate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before -# returning $EXIT_SUCCESS (otherwise $EXIT_FAILURE is returned). +# modified list must be put in 'func_run_hooks_result' before returning. func_hookable func_options_prep func_options_prep () { @@ -1710,14 +1861,8 @@ func_options_prep () opt_verbose=false opt_warning_types= - _G_rc_options_prep=false - if func_run_hooks func_options_prep ${1+"$@"}; then - _G_rc_options_prep=: - # save modified positional parameters for caller - func_options_prep_result=$func_run_hooks_result - fi - - $_G_rc_options_prep + func_run_hooks func_options_prep ${1+"$@"} + func_propagate_result func_run_hooks func_options_prep } @@ -1729,27 +1874,32 @@ func_parse_options () { $debug_cmd - func_parse_options_result= - - _G_rc_parse_options=false + _G_parse_options_requote=false # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. - if func_run_hooks func_parse_options ${1+"$@"}; then - eval set dummy "$func_run_hooks_result"; shift - _G_rc_parse_options=: + func_run_hooks func_parse_options ${1+"$@"} + func_propagate_result func_run_hooks func_parse_options + if $func_propagate_result_result; then + eval set dummy "$func_parse_options_result"; shift + # Even though we may have changed "$@", we passed the "$@" array + # down into the hook and it quoted it for us (because we are in + # this if-branch). No need to quote it again. + _G_parse_options_requote=false fi # Break out of the loop if we already parsed every option. test $# -gt 0 || break + # We expect that one of the options parsed in this function matches + # and thus we remove _G_opt from "$@" and need to re-quote. _G_match_parse_options=: _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" + func_echo "enabling shell trace mode" >&2 $debug_cmd ;; @@ -1760,7 +1910,7 @@ func_parse_options () --warnings|--warning|-W) if test $# = 0 && func_missing_arg $_G_opt; then - _G_rc_parse_options=: + _G_parse_options_requote=: break fi case " $warning_categories $1" in @@ -1815,7 +1965,7 @@ func_parse_options () shift ;; - --) _G_rc_parse_options=: ; break ;; + --) _G_parse_options_requote=: ; break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; *) set dummy "$_G_opt" ${1+"$@"}; shift _G_match_parse_options=false @@ -1823,17 +1973,16 @@ func_parse_options () ;; esac - $_G_match_parse_options && _G_rc_parse_options=: + if $_G_match_parse_options; then + _G_parse_options_requote=: + fi done - - if $_G_rc_parse_options; then + if $_G_parse_options_requote; then # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - func_parse_options_result=$func_quote_for_eval_result + func_quote eval ${1+"$@"} + func_parse_options_result=$func_quote_result fi - - $_G_rc_parse_options } @@ -1846,21 +1995,14 @@ func_validate_options () { $debug_cmd - _G_rc_validate_options=false - # Display all warnings if -W was not given. test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - if func_run_hooks func_validate_options ${1+"$@"}; then - # save modified positional parameters for caller - func_validate_options_result=$func_run_hooks_result - _G_rc_validate_options=: - fi + func_run_hooks func_validate_options ${1+"$@"} + func_propagate_result func_run_hooks func_validate_options # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE - - $_G_rc_validate_options } @@ -1916,8 +2058,8 @@ func_missing_arg () # func_split_equals STRING # ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables after -# splitting STRING at the '=' sign. +# Set func_split_equals_lhs and func_split_equals_rhs shell variables +# after splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ @@ -1932,8 +2074,9 @@ then func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} - test "x$func_split_equals_lhs" = "x$1" \ - && func_split_equals_rhs= + if test "x$func_split_equals_lhs" = "x$1"; then + func_split_equals_rhs= + fi }' else # ...otherwise fall back to using expr, which is often a shell builtin. @@ -1943,7 +2086,7 @@ else func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` func_split_equals_rhs= - test "x$func_split_equals_lhs" = "x$1" \ + test "x$func_split_equals_lhs=" = "x$1" \ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` } fi #func_split_equals @@ -1969,7 +2112,7 @@ else { $debug_cmd - func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'` func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` } fi #func_split_short_opt @@ -2011,31 +2154,44 @@ func_usage_message () # func_version # ------------ # Echo version message to standard output and exit. +# The version message is extracted from the calling file's header +# comments, with leading '# ' stripped: +# 1. First display the progname and version +# 2. Followed by the header comment line matching /^# Written by / +# 3. Then a blank line followed by the first following line matching +# /^# Copyright / +# 4. Immediately followed by any lines between the previous matches, +# except lines preceding the intervening completely blank line. +# For example, see the header comments of this file. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' - /(C)/!b go - :more - /\./!{ - N - s|\n# | | - b more + /^# Written by /!b + s|^# ||; p; n + + :fwd2blnk + /./ { + n + b fwd2blnk } - :go - /^# Written by /,/# warranty; / { - s|^# || - s|^# *$|| - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - p + p; n + + :holdwrnt + s|^# || + s|^# *$|| + /^Copyright /!{ + /./H + n + b holdwrnt } - /^# Written by / { - s|^# || - p - } - /^warranty; /q' < "$progpath" + + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + G + s|\(\n\)\n*|\1|g + p; q' < "$progpath" exit $? } @@ -2045,12 +2201,35 @@ func_version () # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. -scriptversion='(GNU libtool) 2.4.6' +scriptversion='(GNU libtool) 2.5.4' + +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + + year=`date +%Y` + + cat < +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. + +Originally written by Gordon Matzigkeit, 1996 +(See AUTHORS for complete contributor listing) +EOF + + exit $? +} # func_echo ARG... @@ -2073,18 +2252,6 @@ func_echo () } -# func_warning ARG... -# ------------------- -# Libtool warnings are not categorized, so override funclib.sh -# func_warning with this simpler definition. -func_warning () -{ - $debug_cmd - - $warning_func ${1+"$@"} -} - - ## ---------------- ## ## Options parsing. ## ## ---------------- ## @@ -2096,19 +2263,23 @@ usage='$progpath [OPTION]... [MODE-ARG]...' # Short help message in response to '-h'. usage_message="Options: - --config show all configuration variables - --debug enable verbose shell tracing - -n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --mode=MODE use operation mode MODE - --no-warnings equivalent to '-Wnone' - --preserve-dup-deps don't remove duplicate dependency libraries - --quiet, --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - -v, --verbose print more informational messages than default - --version print version information - -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] - -h, --help, --help-all print short, long, or detailed help message + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information + --finish use operation '--mode=finish' + --mode=MODE use operation mode MODE + --no-finish don't update shared library cache + --no-quiet, --no-silent print default informational messages + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --reorder-cache=DIRS reorder shared library cache for preferred DIRS + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message " # Additional text appended to 'usage_message' in response to '--help'. @@ -2141,13 +2312,13 @@ include the following information: compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) - version: $progname $scriptversion Debian-2.4.6-15build2 + version: $progname $scriptversion Debian-2.5.4-9 automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to . -GNU libtool home page: . -General help using GNU software: ." +GNU libtool home page: . +General help using GNU software: ." exit 0 } @@ -2197,7 +2368,7 @@ fi # a configuration failure hint, and exit. func_fatal_configuration () { - func__fatal_error ${1+"$@"} \ + func_fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } @@ -2337,14 +2508,19 @@ libtool_options_prep () opt_dry_run=false opt_help=false opt_mode= + opt_reorder_cache=false opt_preserve_dup_deps=false opt_quiet=false + opt_finishing=true + opt_warning= nonopt= preserve_args= _G_rc_lt_options_prep=: + _G_rc_lt_options_prep=: + # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) @@ -2375,11 +2551,9 @@ libtool_options_prep () if $_G_rc_lt_options_prep; then # Pass back the list of options. - func_quote_for_eval ${1+"$@"} - libtool_options_prep_result=$func_quote_for_eval_result + func_quote eval ${1+"$@"} + libtool_options_prep_result=$func_quote_result fi - - $_G_rc_lt_options_prep } func_add_hook func_options_prep libtool_options_prep @@ -2430,14 +2604,18 @@ libtool_parse_options () clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error - *) func_error "invalid argument for $_G_opt" + *) func_error "invalid argument '$1' for $_G_opt" exit_cmd=exit - break ;; esac shift ;; + --no-finish) + opt_finishing=false + func_append preserve_args " $_G_opt" + ;; + --no-silent|--no-quiet) opt_quiet=false func_append preserve_args " $_G_opt" @@ -2453,6 +2631,24 @@ libtool_parse_options () func_append preserve_args " $_G_opt" ;; + --reorder-cache) + opt_reorder_cache=true + shared_lib_dirs=$1 + if test -n "$shared_lib_dirs"; then + case $1 in + # Must begin with /: + /*) ;; + + # Catch anything else as an error (relative paths) + *) func_error "invalid argument '$1' for $_G_opt" + func_error "absolute paths are required for $_G_opt" + exit_cmd=exit + ;; + esac + fi + shift + ;; + --silent|--quiet) opt_quiet=: opt_verbose=false @@ -2482,15 +2678,25 @@ libtool_parse_options () if $_G_rc_lt_parse_options; then # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - libtool_parse_options_result=$func_quote_for_eval_result + func_quote eval ${1+"$@"} + libtool_parse_options_result=$func_quote_result fi - - $_G_rc_lt_parse_options } func_add_hook func_parse_options libtool_parse_options +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () +{ + if $opt_warning; then + $debug_cmd + $warning_func ${1+"$@"} + fi +} + # libtool_validate_options [ARG]... # --------------------------------- @@ -2507,10 +2713,10 @@ libtool_validate_options () # preserve --debug test : = "$debug_cmd" || func_append preserve_args " --debug" - case $host in + case $host_os in # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 - *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + cygwin* | mingw* | windows* | pw32* | cegcc* | solaris2* | os2*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; @@ -2543,8 +2749,8 @@ libtool_validate_options () } # Pass back the unparsed argument list - func_quote_for_eval ${1+"$@"} - libtool_validate_options_result=$func_quote_for_eval_result + func_quote eval ${1+"$@"} + libtool_validate_options_result=$func_quote_result } func_add_hook func_validate_options libtool_validate_options @@ -2842,7 +3048,7 @@ EOF # func_convert_core_file_wine_to_w32 ARG # Helper function used by file name conversion functions when $build is *nix, -# and $host is mingw, cygwin, or some other w32 environment. Relies on a +# and $host is mingw, windows, cygwin, or some other w32 environment. Relies on a # correctly configured wine environment available, with the winepath program # in $build's $PATH. # @@ -2874,9 +3080,10 @@ func_convert_core_file_wine_to_w32 () # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. +# $host is mingw, windows, cygwin, or some other w32 environment. Relies on a +# correctly configured wine environment available, with the winepath program +# in $build's $PATH. Assumes ARG has no leading or trailing path separator +# characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. @@ -3019,6 +3226,15 @@ func_convert_path_front_back_pathsep () # end func_convert_path_front_back_pathsep +# func_convert_delimited_path PATH ORIG_DELIMITER NEW_DELIMITER +# Replaces a delimiter for a given path. +func_convert_delimited_path () +{ + converted_path=`$ECHO "$1" | $SED "s#$2#$3#g"` +} +# end func_convert_delimited_path + + ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## @@ -3353,6 +3569,65 @@ func_dll_def_p () } +# func_reorder_shared_lib_cache DIRS +# Reorder the shared library cache by unconfiguring previous shared library cache +# and configuring preferred search directories before previous search directories. +# Previous shared library cache: /usr/lib /usr/local/lib +# Preferred search directories: /tmp/testing +# Reordered shared library cache: /tmp/testing /usr/lib /usr/local/lib +func_reorder_shared_lib_cache () +{ + $debug_cmd + + case $host_os in + openbsd*) + get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` + func_convert_delimited_path "$get_search_directories" ':' '\ ' + save_search_directories=$converted_path + func_convert_delimited_path "$1" ':' '\ ' + + # Ensure directories exist + for dir in $converted_path; do + # Ensure each directory is an absolute path + case $dir in + /*) ;; + *) func_error "Directory '$dir' is not an absolute path" + exit $EXIT_FAILURE ;; + esac + # Ensure no trailing slashes + func_stripname '' '/' "$dir" + dir=$func_stripname_result + if test -d "$dir"; then + if test -n "$preferred_search_directories"; then + preferred_search_directories="$preferred_search_directories $dir" + else + preferred_search_directories=$dir + fi + else + func_error "Directory '$dir' does not exist" + exit $EXIT_FAILURE + fi + done + + PATH="$PATH:/sbin" ldconfig -U $save_search_directories + PATH="$PATH:/sbin" ldconfig -m $preferred_search_directories $save_search_directories + get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` + func_convert_delimited_path "$get_search_directories" ':' '\ ' + reordered_search_directories=$converted_path + + $ECHO "Original: $save_search_directories" + $ECHO "Reordered: $reordered_search_directories" + exit $EXIT_SUCCESS + ;; + *) + func_error "--reorder-cache is not supported for host_os=$host_os." + exit $EXIT_FAILURE + ;; + esac +} +# end func_reorder_shared_lib_cache + + # func_mode_compile arg... func_mode_compile () { @@ -3510,8 +3785,8 @@ func_mode_compile () esac done - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ + func_quote_arg pretty "$libobj" + test "X$libobj" != "X$func_quote_arg_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" @@ -3531,7 +3806,7 @@ func_mode_compile () # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) + cygwin* | mingw* | windows* | pw32* | os2* | cegcc*) pic_mode=default ;; esac @@ -3584,8 +3859,8 @@ compiler." func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result + func_quote_arg pretty "$srcfile" + qsrcfile=$func_quote_arg_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then @@ -3740,7 +4015,8 @@ This mode accepts the following additional options: -prefer-non-pic try to build non-PIC objects only -shared do not build a '.o' file suitable for static linking -static only build a '.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler + -Wc,FLAG + -Xcompiler FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. @@ -3846,6 +4122,8 @@ The following components of LINK-COMMAND are treated specially: -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wa,FLAG + -Xassembler FLAG pass linker-specific FLAG directly to the assembler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) @@ -3922,6 +4200,12 @@ if $opt_help; then fi +# If option '--reorder-cache', reorder the shared library cache and exit. +if $opt_reorder_cache; then + func_reorder_shared_lib_cache $shared_lib_dirs +fi + + # func_mode_execute arg... func_mode_execute () { @@ -4106,7 +4390,7 @@ func_mode_finish () fi fi - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs" && $opt_finishing; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -4131,6 +4415,12 @@ func_mode_finish () for libdir in $libdirs; do $ECHO " $libdir" done + if test "false" = "$opt_finishing"; then + echo + echo "NOTE: finish_cmds were not executed during testing, so you must" + echo "manually run ldconfig to add a given test directory, LIBDIR, to" + echo "the search path for generated executables." + fi echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" @@ -4188,8 +4478,8 @@ func_mode_install () case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " + func_quote_arg pretty "$nonopt" + install_prog="$func_quote_arg_result " arg=$1 shift else @@ -4199,8 +4489,8 @@ func_mode_install () # The real first argument should be the name of the installation program. # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" + func_quote_arg pretty "$arg" + func_append install_prog "$func_quote_arg_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; @@ -4257,12 +4547,12 @@ func_mode_install () esac # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" + func_quote_arg pretty "$arg" + func_append install_prog " $func_quote_arg_result" if test -n "$arg2"; then - func_quote_for_eval "$arg2" + func_quote_arg pretty "$arg2" fi - func_append install_shared_prog " $func_quote_for_eval_result" + func_append install_shared_prog " $func_quote_arg_result" done test -z "$install_prog" && \ @@ -4273,8 +4563,8 @@ func_mode_install () if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" + func_quote_arg pretty "$install_override_mode" + func_append install_shared_prog " -m $func_quote_arg_result" fi fi @@ -4367,8 +4657,15 @@ func_mode_install () func_append dir "$objdir" if test -n "$relink_command"; then + # Strip any trailing slash from the destination. + func_stripname '' '/' "$libdir" + destlibdir=$func_stripname_result + + func_stripname '' '/' "$destdir" + s_destdir=$func_stripname_result + # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -4405,7 +4702,7 @@ func_mode_install () 'exit $?' tstripme=$stripme case $host_os in - cygwin* | mingw* | pw32* | cegcc*) + cygwin* | mingw* | windows* | pw32* | cegcc*) case $realname in *.dll.a) tstripme= @@ -4518,7 +4815,7 @@ func_mode_install () # Do a test to see if this is really a libtool program. case $host in - *cygwin* | *mingw*) + *cygwin* | *mingw* | *windows*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result @@ -4570,8 +4867,8 @@ func_mode_install () relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$relink_command" + eval "func_echo $func_quote_arg_result" } if eval "$relink_command"; then : else @@ -4746,7 +5043,7 @@ extern \"C\" { $RM $export_symbols eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin* | *mingw* | *windows* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; @@ -4758,7 +5055,7 @@ extern \"C\" { eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin* | *mingw* | *windows* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -4772,7 +5069,7 @@ extern \"C\" { func_basename "$dlprefile" name=$func_basename_result case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin* | *mingw* | *windows* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" @@ -4798,8 +5095,16 @@ extern \"C\" { eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + case $host in + i[3456]86-*-mingw32*) + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + ;; + *) + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/__nm_//' >> '$nlist'" + ;; + esac } else # not an import lib $opt_dry_run || { @@ -4947,7 +5252,7 @@ static const void *lt_preloaded_setup() { # Transform the symbol file into the correct name. symfileobj=$output_objdir/${my_outputname}S.$objext case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin* | *mingw* | *windows* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` @@ -5023,7 +5328,7 @@ func_win32_libid () *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' >/dev/null; then case $nm_interface in "MS dumpbin") if func_cygming_ms_implib_p "$1" || @@ -5290,7 +5595,7 @@ func_extract_archives () # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw +# incorporate the script contents within a cygwin/mingw/windows # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. @@ -5298,7 +5603,7 @@ func_extract_archives () # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory where it is stored is -# the $objdir directory. This is a cygwin/mingw-specific +# the $objdir directory. This is a cygwin/mingw/windows-specific # behavior. func_emit_wrapper () { @@ -5350,7 +5655,8 @@ else if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + func_quote_arg pretty "$ECHO" + qECHO=$func_quote_arg_result $ECHO "\ # A function that is used when there is no print builtin or printf. @@ -5360,7 +5666,7 @@ func_fallback_echo () \$1 _LTECHO_EOF' } - ECHO=\"$qECHO\" + ECHO=$qECHO fi # Very basic option parsing. These options are (a) specific to @@ -5422,7 +5728,7 @@ func_exec_program_core () " case $host in # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) + *-*-mingw* | *-*-windows* | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 @@ -5490,7 +5796,7 @@ func_exec_program () file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done - # Usually 'no', except on cygwin/mingw when embedded into + # Usually 'no', except on cygwin/mingw/windows when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then @@ -5622,7 +5928,7 @@ EOF #endif #include #include -#ifdef _MSC_VER +#if defined _WIN32 && !defined __GNUC__ # include # include # include @@ -5647,7 +5953,7 @@ EOF /* declarations of non-ANSI functions */ #if defined __MINGW32__ # ifdef __STRICT_ANSI__ -int _putenv (const char *); +_CRTIMP int __cdecl _putenv (const char *); # endif #elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ @@ -5845,7 +6151,7 @@ main (int argc, char *argv[]) { EOF case $host in - *mingw* | *cygwin* ) + *mingw* | *windows* | *cygwin* ) # make stdout use "unix" line endings echo " setmode(1,_O_BINARY);" ;; @@ -5864,7 +6170,7 @@ EOF { /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX namespace, but it is not one of the ones we know about and - have already dealt with, above (inluding dump-script), then + have already dealt with, above (including dump-script), then report an error. Otherwise, targets might begin to believe they are allowed to use options in the LTWRAPPER_OPTION_PREFIX namespace. The first time any user complains about this, we'll @@ -5948,7 +6254,7 @@ EOF EOF case $host_os in - mingw*) + mingw* | windows*) cat <<"EOF" { char* p; @@ -5990,7 +6296,7 @@ EOF EOF case $host_os in - mingw*) + mingw* | windows*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ newargz = prepare_spawn (newargz); @@ -6409,7 +6715,7 @@ lt_update_lib_path (const char *name, const char *value) EOF case $host_os in - mingw*) + mingw* | windows*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). @@ -6584,7 +6890,7 @@ func_mode_link () $debug_cmd case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # what system we are compiling for in order to pass an extra @@ -6608,6 +6914,7 @@ func_mode_link () finalize_command=$nonopt compile_rpath= + compile_rpath_tail= finalize_rpath= compile_shlibpath= finalize_shlibpath= @@ -6648,10 +6955,12 @@ func_mode_link () xrpath= perm_rpath= temp_rpath= + temp_rpath_tail= thread_safe=no vinfo= vinfo_number=no weak_libs= + rpath_arg= single_module=$wl-single_module func_infer_tag $base_compile @@ -6703,9 +7012,9 @@ func_mode_link () while test "$#" -gt 0; do arg=$1 shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" + func_quote_arg pretty,unquoted "$arg" + qarg=$func_quote_arg_unquoted_result + func_append libtool_args " $func_quote_arg_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then @@ -6914,7 +7223,7 @@ func_mode_link () case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - func_fatal_error "only absolute run-paths are allowed" + func_fatal_error "argument to -rpath is not absolute: $arg" ;; esac if test rpath = "$prev"; then @@ -6941,6 +7250,13 @@ func_mode_link () prev= continue ;; + xassembler) + func_append compiler_flags " -Xassembler $qarg" + prev= + func_append compile_command " -Xassembler $qarg" + func_append finalize_command " -Xassembler $qarg" + continue + ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" @@ -7083,7 +7399,7 @@ func_mode_link () ;; esac case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; @@ -7103,7 +7419,7 @@ func_mode_link () -l*) if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; @@ -7111,7 +7427,7 @@ func_mode_link () # These systems don't actually have a C library (as such) test X-lc = "X$arg" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) # Do not include libc due to us having libc/libc_r. test X-lc = "X$arg" && continue ;; @@ -7131,7 +7447,7 @@ func_mode_link () esac elif test X-lc_r = "X$arg"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -7154,16 +7470,29 @@ func_mode_link () # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) + # -q variable in /etc/" +#~ "login.defs. If this variable is set to yes (or is specified on the " #~ "command line), a group will be created for the user, with the same name " #~ "as her loginname. If the variable is set to no " @@ -4981,15 +4981,16 @@ msgstr "" #~ "default/useradd, or 100 by default." #~ msgstr "" #~ "Si non précisé, le comportement de useradd dépendra de " -#~ "la variable dans /etc/login." -#~ "defs. Si cette variable est configurée à yes (ou si est précisée sur la " -#~ "ligne de commandes), un groupe sera créé pour l'utilisateur, avec le même " -#~ "nom que son identifiant. Si la variable est configurée à no (ou si est précisé sur " -#~ "la ligne de commandes), useradd configurera le groupe primaire du nouvel " -#~ "utilisateur à la valeur précisée par la variable " -#~ "dans /etc/default/useradd, ou 100 par défaut." +#~ "la variable dans /etc/" +#~ "login.defs. Si cette variable est configurée à " +#~ "yes (ou si " +#~ "est précisée sur la ligne de commandes), un groupe sera créé pour " +#~ "l'utilisateur, avec le même nom que son identifiant. Si la variable est " +#~ "configurée à no (ou si est précisé sur la ligne de commandes), useradd " +#~ "configurera le groupe primaire du nouvel utilisateur à la valeur précisée " +#~ "par la variable dans /etc/default/" +#~ "useradd, ou 100 par défaut." #~ msgid "" #~ "A list of supplementary groups which the user is also a member of. Each " @@ -5153,8 +5154,8 @@ msgstr "" #~ msgstr "" #~ "Le comportement par défaut (si les options , , et ne sont pas précisées) est défini par " -#~ "la variable dans /etc/login." -#~ "defs." +#~ "la variable dans /etc/" +#~ "login.defs." #~ msgid "" #~ "Allow the creation of a user account with a duplicate (non-unique) UID." @@ -5200,9 +5201,9 @@ msgstr "" #~ msgid "" #~ "Note that useradd will not create a home directory for " -#~ "such an user, regardless of the default setting in /etc/login." -#~ "defs (). You have to specify the " -#~ " options if you want a home directory for a system " +#~ "such an user, regardless of the default setting in /etc/" +#~ "login.defs (). You have to specify " +#~ "the options if you want a home directory for a system " #~ "account to be created." #~ msgstr "" #~ "Notez que useradd ne créera pas de répertoire " @@ -5330,9 +5331,9 @@ msgstr "" #~ "Le nom ou l'identifiant du groupe pour le groupe principal d'un nouvel " #~ "utilisateur (quand l'option est " #~ "utilisée ou quand la variable est " -#~ "configurée à no dans /etc/login." -#~ "defs). Le nom du groupe doit exister, et un identifiant de " -#~ "groupe numérique doit avoir une entrée existante." +#~ "configurée à no dans /etc/" +#~ "login.defs). Le nom du groupe doit exister, et un identifiant " +#~ "de groupe numérique doit avoir une entrée existante." #~ msgid "" #~ "This option sets the variable in /etc/" @@ -7106,10 +7107,10 @@ msgstr "" #~ "pwconv ne fonctionne pas avec " #~ "activée. Pour convertir les mots de passe vers tcb, vous devez d'abord " #~ "utiliser pwconv pour les convertir vers les mots de " -#~ "passe cachés en désactivant dans login." -#~ "defs puis les convertir en mots de passe tcb avec " -#~ "tcb_convert (et en réactivant " -#~ "dans login.defs)." +#~ "passe cachés en désactivant dans " +#~ "login.defs puis les convertir en mots de passe tcb " +#~ "avec tcb_convert (et en réactivant par défaut ou LIMITS_FILE définit dans " +#~ "config.h) décrit les limites de ressource que vous " +#~ "voulez imposer. Il doit être possédé et ne doit être lisible que par le " +#~ "compte root." #~ msgid "" #~ "By default no quota is imposed on 'root'. In fact, there is no way to " diff --git a/po/gl.po b/po/gl.po index 4967b534..a51f4c48 100644 --- a/po/gl.po +++ b/po/gl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2006-07-18 23:27+0200\n" "Last-Translator: Jacobo Tarrio \n" "Language-Team: Galician \n" @@ -3435,8 +3435,8 @@ msgstr "%s: directorio base \"%s\" non válido\n" #~ "\t\t\t\tconta de usuario\n" #~ " -h, --help\t\t\tamosa esta mensaxe de axuda e sae\n" #~ " -k, --skel DIR_SKEL\t\tespecifica un directorio \"skel\" alternativo\n" -#~ " -K, --key CLAVE=VALOR\t\tomite os valores por defecto de /etc/login." -#~ "defs\n" +#~ " -K, --key CLAVE=VALOR\t\tomite os valores por defecto de /etc/" +#~ "login.defs\n" #~ " -m, --create-home\t\tcrea o directorio inicial para a nova conta\n" #~ "\t\t\t\tde usuario\n" #~ " -o, --non-unique\t\tpermite crear usuarios con UIDs duplicados\n" diff --git a/po/he.po b/po/he.po index b3b06d26..bc94bafc 100644 --- a/po/he.po +++ b/po/he.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2004-07-21 23:59+0300\n" "Last-Translator: Lior Kaplan \n" "Language-Team: Hebrew \n" diff --git a/po/hu.po b/po/hu.po index c33ef09c..92832230 100644 --- a/po/hu.po +++ b/po/hu.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2007-11-25 20:56+0100\n" "Last-Translator: SZERVÁC Attila \n" "Language-Team: Hungarian \n" diff --git a/po/id.po b/po/id.po index 5d6e58d4..574b25c8 100644 --- a/po/id.po +++ b/po/id.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.15\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2007-11-25 20:58+0100\n" "Last-Translator: Parlin Imanuel Toh \n" "Language-Team: Debian Indonesia \n" @@ -3452,8 +3452,8 @@ msgstr "%s: direktori awal `%s' tak sah\n" #~ " pengguna baru\n" #~ " -h, --help tampilkan pesan bantuan ini dan keluar\n" #~ " -k, --skel SKEL_DIR berikan direktori skel alternatif\n" -#~ " -K, --key KEY=VALUE ganti nilai-nilai bawaan pada /etc/login." -#~ "defs\n" +#~ " -K, --key KEY=VALUE ganti nilai-nilai bawaan pada /etc/" +#~ "login.defs\n" #~ " -m, --create-home buat direktori rumah untuk pengguna baru\n" #~ " -o, --non-unique perbolehkan pembuatan pengguna dengan\n" #~ " UID terduplikasi (tak-unik)\n" diff --git a/po/it.po b/po/it.po index 7b896f9a..d7e33008 100644 --- a/po/it.po +++ b/po/it.po @@ -25,7 +25,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.1.1\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2008-03-27 14:40+0100\n" "Last-Translator: Danilo Piazzalunga \n" "Language-Team: Italian \n" @@ -3463,8 +3463,8 @@ msgstr "%s: directory di base «%s» non valida\n" #~ "dell'utente\n" #~ " -L, --lock blocca l'account dell'utente\n" #~ " -m, --move-home sposta il contenuto della directory home\n" -#~ " nella nuova posizione (usare solo con -" -#~ "d)\n" +#~ " nella nuova posizione (usare solo con " +#~ "-d)\n" #~ " -o, --non-unique permette di usare un UID duplicato (non\n" #~ " univoco)\n" #~ " -p, --password PASSWORD imposta la nuova PASSWORD cifrata\n" @@ -3571,8 +3571,8 @@ msgstr "%s: directory di base «%s» non valida\n" #~ " recenti di un numero di GIORNI\n" #~ " -u, --user LOGIN mostra il record degli accessi falliti " #~ "o,\n" -#~ " se sono state usate con le opzioni -r, -" -#~ "m\n" +#~ " se sono state usate con le opzioni -r, " +#~ "-m\n" #~ " o -l, imposta conteggi e limiti solo per\n" #~ " l'utente specificato da LOGIN\n" #~ "\n" diff --git a/po/ja.po b/po/ja.po index 50c6301c..76fb4edd 100644 --- a/po/ja.po +++ b/po/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.1.5\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2012-05-21 02:52+0900\n" "Last-Translator: NAKANO Takeo \n" "Language-Team: Japanese \n" diff --git a/po/ka.po b/po/ka.po index c2d53399..7685231d 100644 --- a/po/ka.po +++ b/po/ka.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow-utils\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2024-02-08 06:13+0100\n" "Last-Translator: Temuri Doghonadze \n" "Language-Team: Georgian <(nothing)>\n" @@ -2724,8 +2724,8 @@ msgid "" " -Z, --selinux-user remove any SELinux user mapping for the " "user\n" msgstr "" -" -Z, --selinux-user არსებობის შემთხვევაში მომხმარებლის SELinux -" -"ის მომხმარებელზე ბმის წაშლა\n" +" -Z, --selinux-user არსებობის შემთხვევაში მომხმარებლის SELinux " +"-ის მომხმარებელზე ბმის წაშლა\n" #, c-format msgid "" diff --git a/po/kk.gmo b/po/kk.gmo index 9189eced..b751df65 100644 Binary files a/po/kk.gmo and b/po/kk.gmo differ diff --git a/po/kk.po b/po/kk.po index 33642cf4..59890661 100644 --- a/po/kk.po +++ b/po/kk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadowutils\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2017-02-07 17:09+0500\n" "Last-Translator: Baurzhan Muftakhidinov \n" "Language-Team: Kazakh \n" diff --git a/po/km.po b/po/km.po index e50d70fd..ebdd3837 100644 --- a/po/km.po +++ b/po/km.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow_po_km\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2006-06-28 10:08+0700\n" "Last-Translator: Khoem Sokhem \n" "Language-Team: Khmer \n" diff --git a/po/ko.po b/po/ko.po index 429a5e8d..d3aec06b 100644 --- a/po/ko.po +++ b/po/ko.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.1.1\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2009-04-19 21:32+0900\n" "Last-Translator: Changwoo Ryu \n" "Language-Team: Korean \n" diff --git a/po/nb.po b/po/nb.po index 9e14cc61..e3eb4963 100644 --- a/po/nb.po +++ b/po/nb.po @@ -13,7 +13,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.17\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2018-03-05 12:33+0100\n" "Last-Translator: Åka Sikrom \n" "Language-Team: Norwegian Bokmål \n" @@ -1126,8 +1126,8 @@ msgid "" msgstr "" " -u, --user BRUKER vis faillog-poster eller behandle tellere " "og \n" -" grenser for innloggingsfeil (hvis brukt med -" -"r,\n" +" grenser for innloggingsfeil (hvis brukt med " +"-r,\n" " -m eller -l ) bare for valgt(e) BRUKER(e)\n" #, c-format diff --git a/po/ne.po b/po/ne.po index f28201c9..3c98db5d 100644 --- a/po/ne.po +++ b/po/ne.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.17\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2006-06-16 14:30+0545\n" "Last-Translator: Shiva Pokharel \n" "Language-Team: Nepali \n" diff --git a/po/nl.po b/po/nl.po index 1b52a18c..d4377374 100644 --- a/po/nl.po +++ b/po/nl.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.19.0\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2025-12-07 23:31+0100\n" "Last-Translator: Frans Spiesschaert \n" "Language-Team: Debian Dutch l10n Team \n" diff --git a/po/nn.po b/po/nn.po index 382dd738..7fc47c8d 100644 --- a/po/nn.po +++ b/po/nn.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2004-06-03 21:41+0200\n" "Last-Translator: Håvard Korsvoll \n" "Language-Team: Norwegian (Nynorsk) \n" diff --git a/po/pl.po b/po/pl.po index 82afd553..818f72fd 100644 --- a/po/pl.po +++ b/po/pl.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2007-11-25 20:53+0100\n" "Last-Translator: Tomasz Kłoczko \n" "Language-Team: Polish \n" @@ -3314,8 +3314,8 @@ msgstr "%s: nieprawidłowy katalog bazowy '%s'\n" #~ " -l, --login NOWY_LOGIN nowa nawana logina użytkownika\n" #~ " -L, --lock blokuj konto użytkowqnika\n" #~ " -m, --move-home przenieś zawartość katalogu domowego\n" -#~ " użytkownika (może być użyte tylko z opcją -" -#~ "d)\n" +#~ " użytkownika (może być użyte tylko z opcją " +#~ "-d)\n" #~ " -o, --non-unique pozwól na użycie nieunikalnego UID dla " #~ "konta\n" #~ " -p, --password HASŁO użyj nowe zakodowane HASŁO dla użytkonta\n" @@ -3553,8 +3553,8 @@ msgstr "%s: nieprawidłowy katalog bazowy '%s'\n" #~ " konta\n" #~ " -k, --skel SKEL_DIR podaj alternatywną ścieżkę do katalogu " #~ "skel\n" -#~ " -K, --key KLUCZ=WARTOŚĆ przysłoń wartość domyślną z /etc/login." -#~ "defs\n" +#~ " -K, --key KLUCZ=WARTOŚĆ przysłoń wartość domyślną z /etc/" +#~ "login.defs\n" #~ " -m, --create-home twórz katalog domowy dla nowego " #~ "użytkownika\n" #~ " -o, --non-unique pozwól na utworzenie konta z nieunikalnym " diff --git a/po/pt.po b/po/pt.po index 9543728b..810017a0 100644 --- a/po/pt.po +++ b/po/pt.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2012-01-14 12:41+0000\n" "Last-Translator: Miguel Figueiredo \n" "Language-Team: Portuguese \n" @@ -1109,8 +1109,8 @@ msgid "" msgstr "" " -u, --user LOGIN/RANGE mostrar registo faillog ou manter " "contadores\n" -" de falhas e limites (se utilizado com -r, -" -"m\n" +" de falhas e limites (se utilizado com -r, " +"-m\n" " ou -l) apenas para LOGIN(s) especificado(s)\n" #, c-format @@ -1263,8 +1263,8 @@ msgstr " -g, --gid GID utilizar GID para o novo grupo\n" msgid " -K, --key KEY=VALUE override /etc/login.defs defaults\n" msgstr "" -" -K, --key KEY=VALOR ultrapassar as predefinições de /etc/login." -"defs\n" +" -K, --key KEY=VALOR ultrapassar as predefinições de /etc/" +"login.defs\n" msgid "" " -o, --non-unique allow to create groups with duplicate\n" diff --git a/po/pt_BR.po b/po/pt_BR.po index 272e155b..760b450c 100644 --- a/po/pt_BR.po +++ b/po/pt_BR.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.15\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2011-11-25 20:20+0100\n" "Last-Translator: Fred Ulisses Maranhão \n" "Language-Team: Debian-BR Project \n" diff --git a/po/ro.po b/po/ro.po index 2bec22d1..5b91d784 100644 --- a/po/ro.po +++ b/po/ro.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.16.0\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2024-08-29 20:23+0200\n" "Last-Translator: Remus-Gabriel Chelu \n" "Language-Team: Romanian \n" @@ -3841,8 +3841,8 @@ msgstr "%s: nu s-a reușit să se găsească directorul tcb pentru %s\n" #~ " dacă grupul specificat există deja\n" #~ " -g, --gid GID foloseşte GID pentru noul grup\n" #~ " -h, --help afişează acest mesaj de ajutor şi ieşi\n" -#~ " -K, --key KEY=VALUE înlocuieşte cu setările implicite /etc/login." -#~ "defs\n" +#~ " -K, --key KEY=VALUE înlocuieşte cu setările implicite /etc/" +#~ "login.defs\n" #~ " -o, --non-unique permite crearea grupului cu GID duplicat\n" #~ " (ne-unic)\n" #~ "\n" diff --git a/po/ru.po b/po/ru.po index 7db1d825..ac1e0543 100644 --- a/po/ru.po +++ b/po/ru.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.1.5.1-1\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2017-03-05 11:14+0300\n" "Last-Translator: Yuri Kozlov \n" "Language-Team: Russian \n" @@ -2936,8 +2936,8 @@ msgid "" " new location (use only with -d)\n" msgstr "" " -m, --move-home переместить содержимое домашнего каталога в\n" -" новое место (использовать только вместе с -" -"d)\n" +" новое место (использовать только вместе с " +"-d)\n" msgid "" " -o, --non-unique allow using duplicate (non-unique) UID\n" @@ -3825,8 +3825,8 @@ msgstr "%s: не удалось найти каталог tcb для %s\n" #~ " заданная группа уже существует\n" #~ " -g, --gid GID для новой группы использовать GID\n" #~ " -h, --help показать данное сообщение и закончить работу\n" -#~ " -K, --key KEY=VALUE изменить значения по умолчанию из /etc/login." -#~ "defs\n" +#~ " -K, --key KEY=VALUE изменить значения по умолчанию из /etc/" +#~ "login.defs\n" #~ " -o, --non-unique разрешить создание группы с уже имеющимся\n" #~ " (не уникальным) GID\n" #~ " -p, --password PASS использовать шифрованный пароль для новой группы\n" diff --git a/po/shadow.pot b/po/shadow.pot index 6b2b297e..5763b189 100644 --- a/po/shadow.pot +++ b/po/shadow.pot @@ -6,9 +6,9 @@ #, fuzzy msgid "" msgstr "" -"Project-Id-Version: shadow 4.19.2\n" +"Project-Id-Version: shadow 4.19.3\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/po/sk.po b/po/sk.po index 951bb39b..cd36a6dc 100644 --- a/po/sk.po +++ b/po/sk.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.17\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2011-11-26 22:06+0100\n" "Last-Translator: Ivan Masár \n" "Language-Team: Slovak \n" @@ -3693,8 +3693,8 @@ msgstr "%s: chybný základný adresár „%s“\n" #~ " existencii zadanej skupiny\n" #~ " -g, --gid GID pre novú skupinu použije GID\n" #~ " -h, --help zobrazí tohto pomocníka a ukončí sa\n" -#~ " -K, --key KEY=VALUE nahradí predvolené hodnoty z /etc/login." -#~ "defs\n" +#~ " -K, --key KEY=VALUE nahradí predvolené hodnoty z /etc/" +#~ "login.defs\n" #~ " -o, --non-unique povolí vytvorenie skupiny s duplicitným\n" #~ " (nejedinečným) GID\n" #~ " -p, --password PASSWORD použije pre novú skupinu šifrované heslo\n" @@ -3833,8 +3833,8 @@ msgstr "%s: chybný základný adresár „%s“\n" #~ " patriť nový účet\n" #~ " -h, --help zobrazí tohto pomocníka a skončí\n" #~ " -k, --skel VZOR_ADR zadá alternatívny vzorový adresár\n" -#~ " -K, --key KĽÚČ=HODNOTA nahradí predvolené nastavenia /etc/login." -#~ "defs\n" +#~ " -K, --key KĽÚČ=HODNOTA nahradí predvolené nastavenia /etc/" +#~ "login.defs\n" #~ " -l, --no-log-init nepridávať používateľa do databáz\n" #~ " lastlog a faillog \n" #~ " -m, --create-home vytvorí domovský adresár pre nový\n" diff --git a/po/sq.po b/po/sq.po index f6c22003..800f381a 100644 --- a/po/sq.po +++ b/po/sq.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.3\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2004-11-20 03:28+0100\n" "Last-Translator: Elian Myftiu \n" "Language-Team: Albanian \n" diff --git a/po/sv.po b/po/sv.po index a9c7ea9b..e5892a5e 100644 --- a/po/sv.po +++ b/po/sv.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.1.1\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2011-11-25 22:08+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" diff --git a/po/tl.po b/po/tl.po index 6786d6f4..1dc41eb4 100644 --- a/po/tl.po +++ b/po/tl.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2007-11-26 21:34+0100\n" "Last-Translator: Eric Pareja \n" "Language-Team: Tagalog \n" @@ -3293,8 +3293,8 @@ msgstr "%s: hindi tanggap na batayang directory '%s'\n" #~ " -L, --lock ialdaba ang account ng gumagamit\n" #~ " -m, --move-home ilipat ang laman ng tahanang directory " #~ "sa\n" -#~ " bagong lugar (gamitin lamang kasama ng -" -#~ "d)\n" +#~ " bagong lugar (gamitin lamang kasama ng " +#~ "-d)\n" #~ " -o, --non-unique payagang lumikha ng user na may " #~ "kaparehong UID\n" #~ " -p, --password PASSWOWRD gumamit ng encrypted password para sa " @@ -3413,8 +3413,8 @@ msgstr "%s: hindi tanggap na batayang directory '%s'\n" #~ "ARAW\n" #~ " -u, --user LOGIN ipakita ang faillog record o pangasiwaan ang " #~ "tagabilang\n" -#~ " ng pagkabigo at mga palugit (kung gamit ang -r, -" -#~ "m o\n" +#~ " ng pagkabigo at mga palugit (kung gamit ang -r, " +#~ "-m o\n" #~ " -l na opsiyon) para sa gumagamit ng LOGIN lamang\n" #~ "\n" @@ -3540,8 +3540,8 @@ msgstr "%s: hindi tanggap na batayang directory '%s'\n" #~ " account\n" #~ " -h, --help ipakita itong tulong na ito at lumabas\n" #~ " -k, --skel SKEL_DIR itakda ang alternatibong skel directory\n" -#~ " -K, --key KEY=HALAGA nangingibabaw sa default sa /etc/login." -#~ "defs\n" +#~ " -K, --key KEY=HALAGA nangingibabaw sa default sa /etc/" +#~ "login.defs\n" #~ " -m, --create-home likhain ang tahanang directory para sa\n" #~ " bagong account\n" #~ " -o, --non-unique payagang lumikha ng user na may " diff --git a/po/tr.po b/po/tr.po index 4c58df80..21e953e1 100644 --- a/po/tr.po +++ b/po/tr.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2008-03-29 20:31+0200\n" "Last-Translator: Mehmet Türker \n" "Language-Team: Türkçe \n" @@ -3571,8 +3571,8 @@ msgstr "%s: geçersiz ana dizin '%s'\n" #~ " faillog kayıtlarını gösterir\n" #~ " -u, --user KULLANICI(LOGIN) faillog kaydını gösterir veya hata\n" #~ " sayacını onarır ve sadece KULLANICI ile\n" -#~ " belirtilen kullanıcıları sınırlar (-r, -" -#~ "m\n" +#~ " belirtilen kullanıcıları sınırlar (-r, " +#~ "-m\n" #~ " veya -l seçenekleri ile kullanıldıysa)\n" #~ "\n" diff --git a/po/uk.po b/po/uk.po index 31f19edd..cbcb5916 100644 --- a/po/uk.po +++ b/po/uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.18\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2022-05-16 19:32+0300\n" "Last-Translator: Yuri Chornoivan \n" "Language-Team: Ukrainian \n" @@ -1244,8 +1244,8 @@ msgstr " -g, --gid GID використати GID для нов msgid " -K, --key KEY=VALUE override /etc/login.defs defaults\n" msgstr "" -" -K, --key КЛЮЧ=ЗНАЧЕННЯ перевизначити типові значення /etc/login." -"defs\n" +" -K, --key КЛЮЧ=ЗНАЧЕННЯ перевизначити типові значення /etc/" +"login.defs\n" msgid "" " -o, --non-unique allow to create groups with duplicate\n" diff --git a/po/vi.po b/po/vi.po index 09726938..078f853c 100644 --- a/po/vi.po +++ b/po/vi.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow master\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2016-10-04 07:07+0700\n" "Last-Translator: Trần Ngọc Quân \n" "Language-Team: Vietnamese \n" @@ -1258,8 +1258,8 @@ msgstr " -g, --gid GID dùng GID này cho nhóm mới\n" msgid " -K, --key KEY=VALUE override /etc/login.defs defaults\n" msgstr "" -" -K, --key KHÓA=GIÁ_TRỊ ghi đè lên các giá trị mặc định “/etc/login." -"defs”\n" +" -K, --key KHÓA=GIÁ_TRỊ ghi đè lên các giá trị mặc định “/etc/" +"login.defs”\n" msgid "" " -o, --non-unique allow to create groups with duplicate\n" diff --git a/po/zh_CN.po b/po/zh_CN.po index 8959d54e..f509c624 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.15\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2022-07-27 23:04+0800\n" "Last-Translator: Celeste Liu \n" "Language-Team: Chinese (simplified) \n" diff --git a/po/zh_TW.po b/po/zh_TW.po index 8f69d9e2..208fc645 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: shadow 4.0.9\n" "Report-Msgid-Bugs-To: pkg-shadow-devel@lists.alioth.debian.org\n" -"POT-Creation-Date: 2026-01-19 08:50-0600\n" +"POT-Creation-Date: 2026-02-01 22:41+0100\n" "PO-Revision-Date: 2022-07-27 23:04+0800\n" "Last-Translator: Celeste Liu \n" "Language-Team: Chinese \n" diff --git a/src/Makefile.in b/src/Makefile.in index 5e64cb74..aa31e474 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.18.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2025 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -70,6 +70,8 @@ am__make_running_with_option = \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -479,6 +481,7 @@ EGREP = @EGREP@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ +FILECMD = @FILECMD@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ @@ -578,8 +581,10 @@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -819,25 +824,15 @@ uninstall-binPROGRAMS: `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files + cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(bin_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(bin_PROGRAMS:$(EXEEXT)=) clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(noinst_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(noinst_PROGRAMS:$(EXEEXT)=) install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ @@ -877,16 +872,11 @@ uninstall-sbinPROGRAMS: `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(sbindir)" && rm -f $$files + cd "$(DESTDIR)$(sbindir)" && $(am__rm_f) $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(sbin_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(sbin_PROGRAMS:$(EXEEXT)=) install-ubinPROGRAMS: $(ubin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(ubin_PROGRAMS)'; test -n "$(ubindir)" || list=; \ @@ -926,16 +916,11 @@ uninstall-ubinPROGRAMS: `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(ubindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(ubindir)" && rm -f $$files + cd "$(DESTDIR)$(ubindir)" && $(am__rm_f) $$files clean-ubinPROGRAMS: - @list='$(ubin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(ubin_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(ubin_PROGRAMS:$(EXEEXT)=) install-usbinPROGRAMS: $(usbin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(usbin_PROGRAMS)'; test -n "$(usbindir)" || list=; \ @@ -975,16 +960,11 @@ uninstall-usbinPROGRAMS: `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(usbindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(usbindir)" && rm -f $$files + cd "$(DESTDIR)$(usbindir)" && $(am__rm_f) $$files clean-usbinPROGRAMS: - @list='$(usbin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(usbin_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(usbin_PROGRAMS:$(EXEEXT)=) chage$(EXEEXT): $(chage_OBJECTS) $(chage_DEPENDENCIES) $(EXTRA_chage_DEPENDENCIES) @rm -f chage$(EXEEXT) @@ -1187,7 +1167,7 @@ distclean-compile: $(am__depfiles_remade): @$(MKDIR_P) $(@D) - @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + @: >>$@ am--depfiles: $(am__depfiles_remade) @@ -1342,6 +1322,7 @@ cscopelist-am: $(am__tagged_files) distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am @@ -1403,8 +1384,8 @@ mostlyclean-generic: clean-generic: distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -1416,7 +1397,7 @@ clean-am: clean-binPROGRAMS clean-generic clean-libtool \ clean-usbinPROGRAMS mostlyclean-am distclean: distclean-am - -rm -f ./$(DEPDIR)/chage.Po + -rm -f ./$(DEPDIR)/chage.Po -rm -f ./$(DEPDIR)/check_subid_range-check_subid_range.Po -rm -f ./$(DEPDIR)/chfn.Po -rm -f ./$(DEPDIR)/chgpasswd.Po @@ -1501,7 +1482,7 @@ install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f ./$(DEPDIR)/chage.Po + -rm -f ./$(DEPDIR)/chage.Po -rm -f ./$(DEPDIR)/check_subid_range-check_subid_range.Po -rm -f ./$(DEPDIR)/chfn.Po -rm -f ./$(DEPDIR)/chgpasswd.Po @@ -1607,3 +1588,10 @@ install-am: all-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.% diff --git a/tests/unit/Makefile.in b/tests/unit/Makefile.in index a078350b..46f3425e 100644 --- a/tests/unit/Makefile.in +++ b/tests/unit/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.18.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2025 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -69,6 +69,8 @@ am__make_running_with_option = \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -348,10 +350,9 @@ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ + { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \ } am__recheck_rx = ^[ ]*:recheck:[ ]* am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* @@ -439,12 +440,13 @@ am__sh_e_setup = case $$- in *e*) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ + $$am__collect_skipped_logs \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# developer-defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). @@ -463,6 +465,11 @@ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ +if test -n '$(IGNORE_SKIPPED_LOGS)'; then \ + am__collect_skipped_logs='--collect-skipped-logs no'; \ +else \ + am__collect_skipped_logs=''; \ +fi; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ @@ -545,6 +552,7 @@ EGREP = @EGREP@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ +FILECMD = @FILECMD@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ @@ -644,8 +652,10 @@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -876,27 +886,22 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__aclocal_m4_deps): clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list + $(am__rm_f) $(check_PROGRAMS) + test -z "$(EXEEXT)" || $(am__rm_f) $(check_PROGRAMS:$(EXEEXT)=) ../../lib/$(am__dirstamp): @$(MKDIR_P) ../../lib - @: > ../../lib/$(am__dirstamp) + @: >>../../lib/$(am__dirstamp) ../../lib/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/$(DEPDIR) - @: > ../../lib/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/$(DEPDIR)/$(am__dirstamp) ../../lib/test_adds-adds.$(OBJEXT): ../../lib/$(am__dirstamp) \ ../../lib/$(DEPDIR)/$(am__dirstamp) ../../lib/search/cmp/$(am__dirstamp): @$(MKDIR_P) ../../lib/search/cmp - @: > ../../lib/search/cmp/$(am__dirstamp) + @: >>../../lib/search/cmp/$(am__dirstamp) ../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/search/cmp/$(DEPDIR) - @: > ../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp) ../../lib/search/cmp/test_adds-cmp.$(OBJEXT): \ ../../lib/search/cmp/$(am__dirstamp) \ ../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp) @@ -906,10 +911,10 @@ test_adds$(EXEEXT): $(test_adds_OBJECTS) $(test_adds_DEPENDENCIES) $(EXTRA_test_ $(AM_V_CCLD)$(test_adds_LINK) $(test_adds_OBJECTS) $(test_adds_LDADD) $(LIBS) ../../lib/atoi/strtoi/$(am__dirstamp): @$(MKDIR_P) ../../lib/atoi/strtoi - @: > ../../lib/atoi/strtoi/$(am__dirstamp) + @: >>../../lib/atoi/strtoi/$(am__dirstamp) ../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/atoi/strtoi/$(DEPDIR) - @: > ../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp) ../../lib/atoi/strtoi/test_atoi_strtoi-strtoi.$(OBJEXT): \ ../../lib/atoi/strtoi/$(am__dirstamp) \ ../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp) @@ -932,10 +937,10 @@ test_chkname$(EXEEXT): $(test_chkname_OBJECTS) $(test_chkname_DEPENDENCIES) $(EX ../../lib/$(am__dirstamp) ../../lib/$(DEPDIR)/$(am__dirstamp) ../../lib/alloc/$(am__dirstamp): @$(MKDIR_P) ../../lib/alloc - @: > ../../lib/alloc/$(am__dirstamp) + @: >>../../lib/alloc/$(am__dirstamp) ../../lib/alloc/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/alloc/$(DEPDIR) - @: > ../../lib/alloc/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/alloc/$(DEPDIR)/$(am__dirstamp) ../../lib/alloc/test_exit_if_null-malloc.$(OBJEXT): \ ../../lib/alloc/$(am__dirstamp) \ ../../lib/alloc/$(DEPDIR)/$(am__dirstamp) @@ -951,10 +956,10 @@ test_logind$(EXEEXT): $(test_logind_OBJECTS) $(test_logind_DEPENDENCIES) $(EXTRA $(AM_V_CCLD)$(test_logind_LINK) $(test_logind_OBJECTS) $(test_logind_LDADD) $(LIBS) ../../lib/string/sprintf/$(am__dirstamp): @$(MKDIR_P) ../../lib/string/sprintf - @: > ../../lib/string/sprintf/$(am__dirstamp) + @: >>../../lib/string/sprintf/$(am__dirstamp) ../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/string/sprintf/$(DEPDIR) - @: > ../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp) ../../lib/string/sprintf/test_snprintf-snprintf.$(OBJEXT): \ ../../lib/string/sprintf/$(am__dirstamp) \ ../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp) @@ -968,10 +973,10 @@ test_strncpy$(EXEEXT): $(test_strncpy_OBJECTS) $(test_strncpy_DEPENDENCIES) $(EX $(AM_V_CCLD)$(test_strncpy_LINK) $(test_strncpy_OBJECTS) $(test_strncpy_LDADD) $(LIBS) ../../lib/string/strcpy/$(am__dirstamp): @$(MKDIR_P) ../../lib/string/strcpy - @: > ../../lib/string/strcpy/$(am__dirstamp) + @: >>../../lib/string/strcpy/$(am__dirstamp) ../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) ../../lib/string/strcpy/$(DEPDIR) - @: > ../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp) + @: >>../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp) ../../lib/string/strcpy/test_strtcpy-strtcpy.$(OBJEXT): \ ../../lib/string/strcpy/$(am__dirstamp) \ ../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp) @@ -1019,7 +1024,7 @@ distclean-compile: $(am__depfiles_remade): @$(MKDIR_P) $(@D) - @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + @: >>$@ am--depfiles: $(am__depfiles_remade) @@ -1398,7 +1403,6 @@ distclean-tags: am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: - $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ @@ -1474,10 +1478,37 @@ $(TEST_SUITE_LOG): $(TEST_LOGS) result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ + output_system_information () \ + { \ + echo; \ + { uname -a | $(AWK) '{ \ + printf "System information (uname -a):"; \ + for (i = 1; i < NF; ++i) \ + { \ + if (i != 2) \ + printf " %s", $$i; \ + } \ + printf "\n"; \ +}'; } 2>&1; \ + if test -r /etc/os-release; then \ + echo "Distribution information (/etc/os-release):"; \ + sed 8q /etc/os-release; \ + elif test -r /etc/issue; then \ + echo "Distribution information (/etc/issue):"; \ + cat /etc/issue; \ + fi; \ + }; \ + please_report () \ + { \ +echo "Some test(s) failed. Please report this to $(PACKAGE_BUGREPORT),"; \ +echo "together with the test-suite.log file (gzipped) and your system"; \ +echo "information. Thanks."; \ + }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ + output_system_information; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ @@ -1497,26 +1528,25 @@ $(TEST_SUITE_LOG): $(TEST_LOGS) create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\ if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 check-TESTS: $(check_PROGRAMS) - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @$(am__rm_f) $(RECHECK_LOGS) + @$(am__rm_f) $(RECHECK_LOGS:.log=.trs) + @$(am__rm_f) $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ - trs_list=`for i in $$bases; do echo $$i.trs; done`; \ - log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + log_list=`echo $$log_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ exit $$?; recheck: all $(check_PROGRAMS) - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @$(am__rm_f) $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ @@ -1603,6 +1633,7 @@ test_logind.log: test_logind$(EXEEXT) @am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am @@ -1662,27 +1693,27 @@ install-strip: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + -$(am__rm_f) $(TEST_LOGS) + -$(am__rm_f) $(TEST_LOGS:.log=.trs) + -$(am__rm_f) $(TEST_SUITE_LOG) clean-generic: distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f ../../lib/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/$(am__dirstamp) - -rm -f ../../lib/alloc/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/alloc/$(am__dirstamp) - -rm -f ../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/atoi/strtoi/$(am__dirstamp) - -rm -f ../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/search/cmp/$(am__dirstamp) - -rm -f ../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/string/sprintf/$(am__dirstamp) - -rm -f ../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp) - -rm -f ../../lib/string/strcpy/$(am__dirstamp) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) ../../lib/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/$(am__dirstamp) + -$(am__rm_f) ../../lib/alloc/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/alloc/$(am__dirstamp) + -$(am__rm_f) ../../lib/atoi/strtoi/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/atoi/strtoi/$(am__dirstamp) + -$(am__rm_f) ../../lib/search/cmp/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/search/cmp/$(am__dirstamp) + -$(am__rm_f) ../../lib/string/sprintf/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/string/sprintf/$(am__dirstamp) + -$(am__rm_f) ../../lib/string/strcpy/$(DEPDIR)/$(am__dirstamp) + -$(am__rm_f) ../../lib/string/strcpy/$(am__dirstamp) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -1693,7 +1724,7 @@ clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ mostlyclean-am distclean: distclean-am - -rm -f ../../lib/$(DEPDIR)/test_adds-adds.Po + -rm -f ../../lib/$(DEPDIR)/test_adds-adds.Po -rm -f ../../lib/$(DEPDIR)/test_chkname-chkname.Po -rm -f ../../lib/$(DEPDIR)/test_exit_if_null-exit_if_null.Po -rm -f ../../lib/$(DEPDIR)/test_exit_if_null-shadowlog.Po @@ -1758,7 +1789,7 @@ install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f ../../lib/$(DEPDIR)/test_adds-adds.Po + -rm -f ../../lib/$(DEPDIR)/test_adds-adds.Po -rm -f ../../lib/$(DEPDIR)/test_chkname-chkname.Po -rm -f ../../lib/$(DEPDIR)/test_exit_if_null-exit_if_null.Po -rm -f ../../lib/$(DEPDIR)/test_exit_if_null-shadowlog.Po @@ -1818,3 +1849,10 @@ uninstall-am: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.%