Push changes from server for re-install

LICENSE

@@ -1,3 +1,4 @@
+Copyright (c) 2026 Seth Olivarez
 Copyright (c) 2015 Raspberry Pi (Trading) Ltd.
 
 All rights reserved.

README.md

@@ -1,37 +1,33 @@
-# ChillcraftOS Build System
+# VesperOS Build System
 
-ChillcraftOS is a custom Raspberry Pi OS built using a system based on `pi-gen`. This build system is specifically designed to create **ChillcraftOS** images, not general Raspberry Pi OS images.
+VesperOS is a custom Debian-based OS built using a system based on `pi-gen`.
-
-**Important Notes:**  
-- The 32-bit versions of ChillcraftOS are based on Raspbian.
-- The 64-bit versions of ChillcraftOS are based on Debian.
 
 ## Dependencies
 
-The ChillcraftOS Build System relies on `pi-gen` and is compatible with Debian-based operating systems released after 2017. We recommend using the latest OS versions for better security.
+The VesperOS Build System relies on `pi-gen` and is compatible with Debian-based operating systems released after 2017. We recommend using the latest OS versions for better security.
 
 For other Linux distributions, you can use the Docker-based build method provided below.
 
-To install the required dependencies for building ChillcraftOS, run the following command:
+To install the required dependencies for building VesperOS, run the following command:
 
 ```bash
 apt install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
 dosfstools e2fsprogs libarchive-tools libcap2-bin grep rsync xz-utils file git curl bc \
-gpg pigz xxd arch-test bmap-tools kmod
+gpg pigz xxd arch-test bmap-tools kmod squashfs-tools xorriso mtools
 ```
 
 The `depends` file in the repository lists all the necessary tools, formatted as `<tool>[:<debian-package>]`.
 
-## Getting Started with Building ChillcraftOS
+## Getting Started with Building VesperOS
 
-To start building ChillcraftOS, clone the ChillcraftOS Build System repository:
+To start building VesperOS, clone the os-builder repository:
 
 ```bash
-git clone https://git.oxmc.me/Chillcraft/ChillcraftOS.git
+git clone https://git.oxmc.me/VesperOS/os-builder.git
 ```
 
 For a shallow clone containing only the latest revision, you can add `--depth 1`. **However, avoid using this on your development machine**.
 
 Make sure the repository is cloned to a directory **without spaces**, as spaces in the base path may cause `pi-gen` to fail.
 
-Once cloned, you're ready to configure and start building ChillcraftOS.
+Once cloned, you're ready to configure and start building VesperOS.

build.sh

@@ -5,7 +5,7 @@ run_sub_stage() {
 	log "Begin ${SUB_STAGE_DIR}"
 	pushd "${SUB_STAGE_DIR}" >/dev/null
 	for i in {00..99}; do
-		for DEBCONF_FILE in "${i}-debconf-${ARCH}" "${i}-debconf-arm-only" "${i}-debconf"; do
+		for DEBCONF_FILE in "${i}-debconf-${ARCH}" "${i}-debconf-${PLATFORM}-only" "${i}-debconf-arm-only" "${i}-debconf"; do
 			if [ -f "${SUB_STAGE_DIR}/${DEBCONF_FILE}" ]; then
 				# Skip arm-only if not arm
 				if [[ "${DEBCONF_FILE}" == *"-debconf-arm-only" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -23,7 +23,7 @@ EOF
 				log "End ${SUB_STAGE_DIR}/${DEBCONF_FILE}"
 			fi
 		done
-		for PACKAGE_LIST in "${i}-packages-nr-${ARCH}" "${i}-packages-nr-arm-only" "${i}-packages-nr"; do
+		for PACKAGE_LIST in "${i}-packages-nr-${ARCH}" "${i}-packages-nr-${PLATFORM}-only" "${i}-packages-nr-arm-only" "${i}-packages-nr"; do
 			if [ -f "${SUB_STAGE_DIR}/${PACKAGE_LIST}" ]; then
 				# Skip arm-only packages if not arm architecture
 				if [[ "${PACKAGE_LIST}" == *"-nr-arm-only" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -43,7 +43,7 @@ EOF
 				log "End ${SUB_STAGE_DIR}/${PACKAGE_LIST}"
 			fi
 		done
-		for PACKAGE_LIST in "${i}-packages-${ARCH}" "${i}-packages-arm-only" "${i}-packages"; do
+		for PACKAGE_LIST in "${i}-packages-${ARCH}" "${i}-packages-${PLATFORM}-only" "${i}-packages-arm-only" "${i}-packages"; do
 			if [ -f "${SUB_STAGE_DIR}/${PACKAGE_LIST}" ]; then
 				# Skip arm-only packages if not arm architecture
 				if [[ "${PACKAGE_LIST}" == *"-packages-arm-only" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -63,7 +63,7 @@ EOF
 				log "End ${SUB_STAGE_DIR}/${PACKAGE_LIST}"
 			fi
 		done
-		for PATCH_DIR in "${i}-patches-${ARCH}" "${i}-patches-arm-only" "${i}-patches"; do
+		for PATCH_DIR in "${i}-patches-${ARCH}" "${i}-patches-${PLATFORM}-only" "${i}-patches-arm-only" "${i}-patches"; do
 			if [ -d "${SUB_STAGE_DIR}/${PATCH_DIR}" ]; then
 				# Check arm-only patches should only apply for armhf/arm64
 				if [[ "${PATCH_DIR}" == *"-patches-arm-only" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -101,7 +101,7 @@ EOF
 				log "End ${SUB_STAGE_DIR}/${PATCH_DIR}"
 			fi
 		done
-		for RUN_SCRIPT in "${i}-run-${ARCH}.sh" "${i}-run-arm-only.sh" "${i}-run.sh"; do
+		for RUN_SCRIPT in "${i}-run-${ARCH}.sh" "${i}-run-${PLATFORM}-only.sh" "${i}-run-arm-only.sh" "${i}-run.sh"; do
 			if [ -x "${SUB_STAGE_DIR}/${RUN_SCRIPT}" ]; then
 				# Skip arm-only if not arm
 				if [[ "${RUN_SCRIPT}" == *"-arm-only.sh" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -111,11 +111,11 @@ EOF
 				log "Begin ${SUB_STAGE_DIR}/${RUN_SCRIPT}"
 				"./${RUN_SCRIPT}"
 				log "End ${SUB_STAGE_DIR}/${RUN_SCRIPT}"
-			elif [ -f ${i}-run.sh ]; then
+			elif [ "${RUN_SCRIPT}" = "${i}-run.sh" ] && [ -f "${SUB_STAGE_DIR}/${i}-run.sh" ]; then
 				log "Skip ${SUB_STAGE_DIR}/${i}-run.sh (not executable)"
 			fi
 		done
-		for CHROOT_SCRIPT in "${i}-run-chroot-${ARCH}.sh" "${i}-run-chroot-arm-only.sh" "${i}-run-chroot.sh"; do
+		for CHROOT_SCRIPT in "${i}-run-chroot-${ARCH}.sh" "${i}-run-chroot-${PLATFORM}-only.sh" "${i}-run-chroot-arm-only.sh" "${i}-run-chroot.sh"; do
 			if [ -f "${SUB_STAGE_DIR}/${CHROOT_SCRIPT}" ]; then
 				# Skip arm-only if not arm
 				if [[ "${CHROOT_SCRIPT}" == *"-arm-only.sh" ]] && [[ "${ARCH}" != "armhf" && "${ARCH}" != "arm64" ]]; then
@@ -143,11 +143,6 @@ run_stage() {
 
 	unmount "${WORK_DIR}/${STAGE}"
 
-	if [ ! -f SKIP_IMAGES ]; then
-		if [ -f "${STAGE_DIR}/EXPORT_IMAGE" ]; then
-			EXPORT_DIRS="${EXPORT_DIRS} ${STAGE_DIR}"
-		fi
-	fi
 	if [ ! -f SKIP ]; then
 		if [ "${CLEAN}" = "1" ]; then
 			if [ -d "${ROOTFS_DIR}" ]; then
@@ -161,7 +156,7 @@ run_stage() {
 		fi
 		for SUB_STAGE_DIR in "${STAGE_DIR}"/*; do
 			if [ -d "${SUB_STAGE_DIR}" ]; then
-				if [ ! -f "${SUB_STAGE_DIR}/SKIP" ] && [ ! -f "${SUB_STAGE_DIR}/SKIP_${ARCH}" ]; then
+				if [ ! -f "${SUB_STAGE_DIR}/SKIP" ] && [ ! -f "${SUB_STAGE_DIR}/SKIP_${ARCH}" ] && { [ -z "${PLATFORM}" ] || [ ! -f "${SUB_STAGE_DIR}/SKIP_${PLATFORM}" ]; }; then
 					run_sub_stage
 				fi
 			fi
@@ -184,7 +179,7 @@ term() {
 		log "Build finished"
 	fi
 	unmount "${STAGE_WORK_DIR}"
-	if [ "$STAGE" = "export-image" ]; then
+	if [ "$STAGE" = "exports/img" ]; then
 		for img in "${STAGE_WORK_DIR}/"*.img; do
 			unmount_image "$img"
 		done
@@ -228,8 +223,9 @@ export PI_GEN_REPO=${PI_GEN_REPO:-https://github.com/RPi-Distro/pi-gen}
 export PI_GEN_RELEASE=${PI_GEN_RELEASE:-Raspberry Pi reference}
 
 export ARCH="${ARCH:-arm64}"
+export PLATFORM="${PLATFORM:-}"
 export RELEASE=${RELEASE:-trixie}
-export IMG_NAME="${IMG_NAME:-chillcraftos-$RELEASE-$ARCH}"
+export IMG_NAME="${IMG_NAME:-vesperos-$RELEASE-$ARCH}"
 
 export USE_QEMU="${USE_QEMU:-0}"
 export IMG_DATE="${IMG_DATE:-"$(date +%Y-%m-%d)"}"
@@ -244,9 +240,7 @@ export DEPLOY_COMPRESSION=${DEPLOY_COMPRESSION:-xz}
 export COMPRESSION_LEVEL=${COMPRESSION_LEVEL:-6}
 export LOG_FILE="${WORK_DIR}/build.log"
 
-export TARGET_HOSTNAME=${TARGET_HOSTNAME:-chillcraftos}
+export TARGET_HOSTNAME=${TARGET_HOSTNAME:-vesperos}
-export FIRST_USER_NAME=${FIRST_USER_NAME:-system}
-export FIRST_USER_ISSYSTEM=${FIRST_USER_ISSYSTEM:-true}
 export WPA_COUNTRY
 export ENABLE_SSH="${ENABLE_SSH:-0}"
 export PUBKEY_ONLY_SSH="${PUBKEY_ONLY_SSH:-0}"
@@ -256,12 +250,10 @@ export LOCALE_DEFAULT="${LOCALE_DEFAULT:-en_US.UTF-8}"
 export KEYBOARD_KEYMAP="${KEYBOARD_KEYMAP:-us}"
 export KEYBOARD_LAYOUT="${KEYBOARD_LAYOUT:-English (US)}"
 
-export TIMEZONE_DEFAULT="${TIMEZONE_DEFAULT:-Americas/Los_Angeles}"
+export TIMEZONE_DEFAULT="${TIMEZONE_DEFAULT:-America/Los_Angeles}"
 
 export GIT_HASH=${GIT_HASH:-"$(git rev-parse HEAD)"}
 
-export PUBKEY_SSH_FIRST_USER
-
 export CLEAN
 export APT_PROXY
 export TEMP_REPO
@@ -274,8 +266,6 @@ export PREV_STAGE_DIR
 export ROOTFS_DIR
 export PREV_ROOTFS_DIR
 export IMG_SUFFIX
-export NOOBS_NAME
-export NOOBS_DESCRIPTION
 export EXPORT_DIR
 export EXPORT_ROOTFS_DIR
 
@@ -285,6 +275,8 @@ export QUILT_NO_DIFF_TIMESTAMPS=1
 export QUILT_REFRESH_ARGS="-p ab"
 
 export ENABLE_CLOUD_INIT=${ENABLE_CLOUD_INIT:-1}
+export LIVEBOOT=${LIVEBOOT:-0}
+export EXPORTS="${EXPORTS:-}"
 
 # shellcheck source=scripts/common
 source "${SCRIPT_DIR}/common"
@@ -321,12 +313,6 @@ if ! arch-test -n "$ARCH"; then
 	fi
 fi
 
-#check username is valid
-if [[ ! "$FIRST_USER_NAME" =~ ^[a-z][-a-z0-9_]*$ ]]; then
-	echo "Invalid FIRST_USER_NAME: $FIRST_USER_NAME"
-	exit 1
-fi
-
 if [[ -n "${APT_PROXY}" ]] && ! curl --silent "${APT_PROXY}" >/dev/null; then
 	echo "Could not reach APT_PROXY server: ${APT_PROXY}"
 	exit 1
@@ -337,53 +323,44 @@ if [[ -n "${WPA_PASSWORD}" && ${#WPA_PASSWORD} -lt 8 || ${#WPA_PASSWORD} -gt 63
 	exit 1
 fi
 
-if [[ "${PUBKEY_ONLY_SSH}" = "1" && -z "${PUBKEY_SSH_FIRST_USER}" ]]; then
-	echo "Must set 'PUBKEY_SSH_FIRST_USER' to a valid SSH public key if using PUBKEY_ONLY_SSH"
-	exit 1
-fi
-
 log "Begin ${BASE_DIR}"
 
 STAGE_LIST=${STAGE_LIST:-${BASE_DIR}/stage*}
 export STAGE_LIST
 
-EXPORT_CONFIG_DIR=$(realpath "${EXPORT_CONFIG_DIR:-"${BASE_DIR}/export-image"}")
-if [ ! -d "${EXPORT_CONFIG_DIR}" ]; then
-	echo "EXPORT_CONFIG_DIR invalid: ${EXPORT_CONFIG_DIR} does not exist"
-	exit 1
-fi
-export EXPORT_CONFIG_DIR
-
 for STAGE_DIR in $STAGE_LIST; do
 	STAGE_DIR=$(realpath "${STAGE_DIR}")
 	run_stage
 done
 
 CLEAN=1
-for EXPORT_DIR in ${EXPORT_DIRS}; do
+
-	STAGE_DIR=${EXPORT_CONFIG_DIR}
+# Exports declared in config: EXPORTS="stage3:squashfs stage2:img ..."
-	# shellcheck source=/dev/null
+for export_spec in ${EXPORTS}; do
-	source "${EXPORT_DIR}/EXPORT_IMAGE"
+	stage_name="${export_spec%%:*}"
-	EXPORT_ROOTFS_DIR=${WORK_DIR}/$(basename "${EXPORT_DIR}")/rootfs
+	export_type="${export_spec##*:}"
-	if [ -e "${EXPORT_DIR}/EXPORT_ISO" ]; then
+	EXPORT_DIR="${BASE_DIR}/${stage_name}"
-		# shellcheck source=/dev/null
+	EXPORT_ROOTFS_DIR="${WORK_DIR}/${stage_name}/rootfs"
-		source "${EXPORT_DIR}/EXPORT_ISO"
+	case "${export_type}" in
-		STAGE_DIR="${BASE_DIR}/export-iso"
+	img)
+		STAGE_DIR="${BASE_DIR}/exports/img"
 		run_stage
-	elif [ -e "${EXPORT_DIR}/EXPORT_IMAGE" ]; then
+		;;
-		# shellcheck source=/dev/null
+	squashfs)
-		source "${EXPORT_DIR}/EXPORT_IMAGE"
+		STAGE_DIR="${BASE_DIR}/exports/squashfs"
-		STAGE_DIR="${BASE_DIR}/export-image"
 		run_stage
-	fi
+		;;
-	if [ "${USE_QEMU}" != "1" ]; then
+	noobs)
-		if [ -e "${EXPORT_DIR}/EXPORT_NOOBS" ]; then
+		if [ "${USE_QEMU}" != "1" ]; then
-			# shellcheck source=/dev/null
+			STAGE_DIR="${BASE_DIR}/exports/noobs"
-			source "${EXPORT_DIR}/EXPORT_NOOBS"
-			STAGE_DIR="${BASE_DIR}/export-noobs"
 			run_stage
 		fi
-	fi
+		;;
+	*)
+		log "Unknown export type '${export_type}' in EXPORTS spec '${export_spec}'"
+		false
+		;;
+	esac
 done
 
 if [ -x "${BASE_DIR}/postrun.sh" ]; then

build_amd64

@@ -1 +0,0 @@
-ARCH=amd64

build_arm64

@@ -1 +0,0 @@
-ARCH=arm64

configs/amd64

@@ -0,0 +1,21 @@
+# This builds VesperOS for amd64
+ARCH=amd64
+
+# Suffix to append to the image name
+#IMG_SUFFIX="-rainier"
+
+# Exports to produce
+EXPORTS="stage3:squashfs"
+
+# Weather to export the image with compression (zip, gz, xz) or not (none)
+DEPLOY_COMPRESSION="none"
+
+# Set LIVEBOOT=1 to also produce a livefs.squashfs with Calamares installed
+# for use with gen-installmedia. Outputs deploy/livefs.{squashfs,vmlinuz,initrd.img}
+# alongside the clean deploy/rootfs.squashfs.
+LIVEBOOT=1
+
+# Live boot options
+LIVE_USERNAME="vesper"
+LIVE_USER_FULLNAME="VesperOS Live User"
+LIVE_USER_PASSWORD="vesper"

configs/arm64

@@ -0,0 +1,11 @@
+# This builds VesperOS for arm64
+ARCH=arm64
+
+# Suffix to append to the image name
+#IMG_SUFFIX="-rainier"
+
+# Exports to produce
+EXPORTS="stage3:squashfs"
+
+# Weather to export the image with compression (zip, gz, xz) or not (none)
+DEPLOY_COMPRESSION="none"

configs/rpi4

@@ -0,0 +1,17 @@
+# Raspberry Pi OS only targets arm64 since the rpi4.
+# So VesperOS will also only target arm64 for the rpi4 and up.
+
+# This builds VesperOS for arm64
+ARCH=arm64
+
+# This tells the build system we are targetting a raspberry pi
+PLATFORM=rpi
+
+# Suffix to append to the image name
+IMG_SUFFIX="-rainier-rpi"
+
+# Exports to produce
+EXPORTS="stage3:squashfs"
+
+# Weather to export the image with compression (zip, gz, xz) or not (none)
+DEPLOY_COMPRESSION="none"

depends

@@ -21,3 +21,6 @@ bc
 gpg
 pigz
 arch-test
+mksquashfs:squashfs-tools
+xorriso
+grub-mkrescue:grub-common

docs/config.md

@@ -1,168 +1,133 @@
-## Config
+# Config
 
-Upon execution, `build.sh` will source the file `config` in the current
+`build.sh` sources the file `config` in the current working directory at startup. It can also be specified explicitly:
-working directory.  This bash shell fragment is intended to set needed
-environment variables.
 
-The following environment variables are supported:
+```bash
+sudo ./build.sh -c build_amd64
+```
 
- * `IMG_NAME` (Default: `raspios-$RELEASE-$ARCH`, for example: `raspios-trixie-armhf`)
+## Variables
 
-   The name of the image to build with the current stage directories. Use this
+### Core
-   variable to set the root name of your OS, eg `IMG_NAME=Frobulator`.
-   Export files in stages may add suffixes to `IMG_NAME`.
 
- * `PI_GEN_RELEASE` (Default: `Raspberry Pi reference`)
+* `IMG_NAME` (Default: `vesperos-$RELEASE-$ARCH`)
 
-   The release name to use in `/etc/issue.txt`. The default should only be used
+  Base name for output files.
-   for official Raspberry Pi builds.
 
 * `RELEASE` (Default: `trixie`)
 
-   The release version to build images against. Valid values are any supported
+  Debian release to build against.
-   Debian release. However, since different releases will have different sets of
-   packages available, you'll need to either modify your stages accordingly, or
-   checkout the appropriate branch. For example, if you'd like to build a
-   `bullseye` image, you should do so from the `bullseye` branch.
 
- * `APT_PROXY` (Default: unset)
+* `ARCH` (Default: `arm64`)
 
-   If you require the use of an apt proxy, set it here.  This proxy setting
+  Target architecture. One of: `arm64`, `armhf`, `amd64`.
-   will not be included in the image, making it safe to use an `apt-cacher` or
-   similar package for development.
 
- * `TEMP_REPO` (Default: unset)
+### Directories
 
-   An additional temporary apt repo to be used during the build process. This
+* `WORK_DIR` (Default: `$BASE_DIR/work`)
-   could be useful if you require pre-release software to be included in the
-   image. The variable should contain sources in [one-line-style format](https://manpages.debian.org/stable/apt/sources.list.5.en.html#ONE-LINE-STYLE_FORMAT).
-   "RELEASE" will be replaced with the RELEASE variable.
 
- * `BASE_DIR`  (Default: location of `build.sh`)
+  Where stage rootfs directories are built. Should be on a Linux filesystem — NTFS will not work.
 
-   **CAUTION**: Currently, changing this value will probably break build.sh
+* `DEPLOY_DIR` (Default: `$BASE_DIR/deploy`)
 
-   Top-level directory for `pi-gen`.  Contains stage directories, build
+  Where finished images and archives are placed.
-   scripts, and by default both work and deployment directories.
 
- * `WORK_DIR`  (Default: `$BASE_DIR/work`)
+### Network / SSH
 
-   Directory in which `pi-gen` builds the target system.  This value can be
+* `ENABLE_SSH` (Default: `0`)
-   changed if you have a suitably large, fast storage location for stages to
-   be built and cached.  Note, `WORK_DIR` stores a complete copy of the target
-   system for each build stage, amounting to tens of gigabytes in the case of
-   Raspbian.
 
-   **CAUTION**: If your working directory is on an NTFS partition you probably won't be able to build: make sure this is a proper Linux filesystem.
+  Set to `1` to enable the SSH server in the built image.
 
- * `DEPLOY_DIR`  (Default: `$BASE_DIR/deploy`)
+* `PUBKEY_SSH_FIRST_USER` (Default: unset)
 
-   Output directory for target system images and NOOBS bundles.
+  If set, written to `~/.ssh/authorized_keys` for the first user.
 
- * `DEPLOY_COMPRESSION` (Default: `zip`)
+* `PUBKEY_ONLY_SSH` (Default: `0`)
 
-   Set to:
+  Set to `1` to disable password auth and require public key auth for SSH.
-   * `none` to deploy the actual image (`.img`).
-   * `zip` to deploy a zipped image (`.zip`).
-   * `gz` to deploy a gzipped image (`.img.gz`).
-   * `xz` to deploy a xzipped image (`.img.xz`).
 
- * `COMPRESSION_LEVEL` (Default: `6`)
+* `APT_PROXY` (Default: unset)
 
-   Compression level to be used when using `zip`, `gz` or `xz` for
+  Apt proxy URL (e.g. `http://192.168.1.1:3142`). Not included in the final image.
-   `DEPLOY_COMPRESSION`. From 0 to 9 (refer to the tool man page for more
-   information on this. Usually 0 is no compression but very fast, up to 9 with
-   the best compression but very slow ).
 
- * `USE_QEMU` (Default: `0`)
+* `TEMP_REPO` (Default: unset)
 
-   Setting to '1' enables the QEMU mode - creating an image that can be mounted via QEMU for an emulated
+  Additional temporary apt repo used only during the build. Supports `RELEASE` substitution.
-   environment. These images include "-qemu" in the image file name.
 
- * `LOCALE_DEFAULT` (Default: 'en_GB.UTF-8' )
+### Locale / Keyboard
 
-   Default system locale.
+* `LOCALE_DEFAULT` (Default: `en_US.UTF-8`)
 
- * `TARGET_HOSTNAME` (Default: 'raspberrypi' )
+* `KEYBOARD_KEYMAP` (Default: `en`)
 
-   Setting the hostname to the specified value.
+* `KEYBOARD_LAYOUT` (Default: `English (US)`)
 
- * `KEYBOARD_KEYMAP` (Default: 'gb' )
+* `TIMEZONE_DEFAULT` (Default: `America/Los Angeles`)
 
-   Default keyboard keymap.
+### Cloud-init
 
-   To get the current value from a running system, run `debconf-show
+* `ENABLE_CLOUD_INIT` (Default: `1`)
-   keyboard-configuration` and look at the
-   `keyboard-configuration/xkb-keymap` value.
 
- * `KEYBOARD_LAYOUT` (Default: 'English (UK)' )
+  Set to `1` to install and configure cloud-init. On RPi, seed files go to `/boot/firmware/`. On amd64, they go to `/var/lib/cloud/seed/nocloud/`.
 
-   Default keyboard layout.
+### Other
 
-   To get the current value from a running system, run `debconf-show
+* `USE_QEMU` (Default: `0`)
-   keyboard-configuration` and look at the
-   `keyboard-configuration/variant` value.
 
- * `TIMEZONE_DEFAULT` (Default: 'Europe/London' )
+  Set to `1` to produce a QEMU-compatible image (adds `-qemu` suffix).
 
-   Default time zone.
+* `SETFCAP` (Default: unset)
 
-   To get the current value from a running system, look in
+  Set to `1` to preserve Linux capabilities in the rootfs. Only needed for NFS or capability-sensitive deployments.
-   `/etc/timezone`.
 
- * `FIRST_USER_NAME` (Default: `system`)
+* `STAGE_LIST` (Default: `stage*`)
 
-   Username for the first user. This user only exists during the image creation process.
+  Override the list of stages to run. Example: `"stage0 stage1 mystage stage2"`.
 
- * `WPA_COUNTRY` (Default: unset)
+* `EXPORTS` (Default: unset)
 
-   Sets the default WLAN regulatory domain and unblocks WLAN interfaces. This should be a 2-letter ISO/IEC 3166 country Code, i.e. `GB`
+  Space-separated list of `stage:type` pairs declaring what to export and from which stage. Supported types: `squashfs`, `img`, `noobs`. Example:
 
- * `ENABLE_SSH` (Default: `0`)
+  ```bash
+  EXPORTS="stage3:squashfs"
+  EXPORTS="stage3:squashfs stage2:img"
+  ```
 
-   Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you Raspberry Pi.
+### Live boot (squashfs only)
 
-  * `PUBKEY_SSH_FIRST_USER` (Default: unset)
+* `LIVEBOOT` (Default: `0`)
 
-   Setting this to a value will make that value the contents of the FIRST_USER_NAME's ~/.ssh/authorized_keys.  Obviously the value should
+  Set to `1` to produce a second `-live` squashfs alongside the raw one. Installs `live-boot`, configures GDM autologin, and rebuilds the initramfs. Only applies to `amd64`.
-   therefore be a valid authorized_keys file.  Note that this does not
-   automatically enable SSH.
 
-  * `PUBKEY_ONLY_SSH` (Default: `0`)
+* `LIVE_USERNAME` (Default: `vesperos`)
+* `LIVE_USER_FULLNAME` (Default: `Live User`)
+* `LIVE_USER_PASSWORD` (Default: `vesperos`)
 
-   * Setting to `1` will disable password authentication for SSH and enable
+### NOOBS
-   public key authentication.  Note that if SSH is not enabled this will take
-   effect when SSH becomes enabled.
 
- * `SETFCAP` (Default: unset)
+* `NOOBS_NAME` — Display name shown in the NOOBS menu.
+* `NOOBS_DESCRIPTION` — Short description shown in the NOOBS menu.
 
-   * Setting to `1` will prevent pi-gen from dropping the "capabilities"
+  Both must be set in the config when using `noobs` in `EXPORTS`.
-   feature. Generating the root filesystem with capabilities enabled and running
-   it from a filesystem that does not support capabilities (like NFS) can cause
-   issues. Only enable this if you understand what it is.
 
- * `STAGE_LIST` (Default: `stage*`)
+## Example Config Files
 
-    If set, then instead of working through the numeric stages in order, this list will be followed. For example setting to `"stage0 stage1 mystage stage2"` will run the contents of `mystage` before stage2. Note that quotes are needed around the list. An absolute or relative path can be given for stages outside the pi-gen directory.
+### amd64 with live boot
-
- * `EXPORT_CONFIG_DIR` (Default: `$BASE_DIR/export-image`)
-
-    If set, use this directory path as the location of scripts to run when generating images. An absolute or relative path can be given for a location outside the pi-gen directory.
-
- * `ENABLE_CLOUD_INIT` (Default: `1`)
-
-    If set to `1`, cloud-init and netplan will be installed and configured. This will allow you to configure your Raspberry Pi using cloud-init configuration files. The cloud-init configuration files should be placed in the bootfs or by editing the files in `stage2/04-cloud-init/files`. Cloud-init will be configured to read them on first boot.
-
-A simple example for building Raspberry Pi OS:
 
 ```bash
-IMG_NAME='raspios'
+ARCH='amd64'
+EXPORTS="stage3:squashfs"
+DEPLOY_COMPRESSION="none"
+LIVEBOOT=1
+LIVE_USERNAME="vesper"
+LIVE_USER_PASSWORD="vesper"
 ```
 
-The config file can also be specified on the command line as an argument the `build.sh` or `build-docker.sh` scripts.
+### Raspberry Pi (arm64)
 
+```bash
+ARCH='arm64'
+EXPORTS="stage3:squashfs"
+DEPLOY_COMPRESSION="none"
+ENABLE_CLOUD_INIT=1
 ```
-./build.sh -c myconfig
-```
-
-This is parsed after `config` so can be used to override values set there.

docs/docker-build.md

@@ -1,47 +1,55 @@
-## Docker Build
+# Docker Build
 
-Docker can be used to perform the build inside a container. This partially isolates
+Docker can be used to run the build inside a container. This is useful on non-Debian hosts (e.g. Fedora, Arch, macOS with Linux VM) or to keep the build environment isolated from the host system.
-the build from the host system, and allows using the script on non-debian based
-systems (e.g. Fedora Linux). The isolation is not complete due to the need to use
-some kernel level services for arm emulation (binfmt) and loop devices (losetup).
 
-To build:
+> **Note**: The Docker build is not fully isolated — it still needs kernel-level access for `binfmt_misc` (ARM emulation) and `losetup` (loop devices for `.img` builds).
+
+## Building
 
 ```bash
-vi config         # Edit your config file. See above.
+cp config.example config   # edit as needed
 ./build-docker.sh
 ```
 
-If everything goes well, your finished image will be in the `deploy/` folder.
+Output will be in `deploy/`.
-You can then remove the build container with `docker rm -v pigen_work`
 
-If you encounter errors during the build, you can edit the corresponding scripts, and
+## Continuing After a Failure
-continue:
+
+Edit the failing script, then resume without restarting from scratch:
 
 ```bash
 CONTINUE=1 ./build-docker.sh
 ```
 
-To examine the container after a failure you can enter a shell within it using:
+## Inspecting the Container After a Failure
 
 ```bash
-sudo docker run -it --privileged --volumes-from=pigen_work pi-gen /bin/bash
+sudo docker run -it --privileged --volumes-from=pigen_work vesperos-build /bin/bash
 ```
 
-After successful build, the build container is by default removed. This may be undesired when making incremental changes to a customized build. To prevent the build script from remove the container add
+## Preserving the Container Between Runs
+
+By default the container is removed after a successful build. To keep it for incremental development:
 
 ```bash
 PRESERVE_CONTAINER=1 ./build-docker.sh
 ```
 
-There is a possibility that even when running from a docker container, the
+## Passing Extra Docker Arguments
-installation of `qemu-user-static` will silently fail when building the image
-because `binfmt-support` _must be enabled on the underlying kernel_. An easy
-fix is to ensure `binfmt-support` is installed on the host machine before
-starting the `./build-docker.sh` script (or using your own docker build
-solution).
 
-### Passing arguments to Docker
+Use `PIGEN_DOCKER_OPTS` to pass additional flags to `docker run`:
 
-When the docker image is run various required command line arguments are provided.  For example the system mounts the `/dev` directory to the `/dev` directory within the docker container.  If other arguments are required they may be specified in the PIGEN_DOCKER_OPTS environment variable.  For example setting `PIGEN_DOCKER_OPTS="--add-host foo:192.168.0.23"` will add '192.168.0.23   foo' to the `/etc/hosts` file in the container.  The `--name`
+```bash
-and `--privileged` options are already set by the script and should not be redefined.
+PIGEN_DOCKER_OPTS="--add-host myrepo:192.168.1.10" ./build-docker.sh
+```
+
+The `--name` and `--privileged` flags are already set by the script and should not be redefined.
+
+## binfmt_misc on Docker Hosts
+
+If building ARM images, `binfmt_misc` must be enabled on the host kernel before starting the build:
+
+```bash
+sudo apt-get install binfmt-support qemu-user-static
+sudo update-binfmts --enable
+```

docs/get-started.md

@@ -1,48 +1,73 @@
-# pi-gen
+# Getting Started
 
-Tool used to create Raspberry Pi OS images, and custom images based on Raspberry Pi OS,
+VesperOS is a Debian Trixie-based OS for Raspberry Pi (arm64/armhf) and amd64, built using a modified pi-gen pipeline.
-which was in turn derived from the Raspbian project.
 
-**Note**: Raspberry Pi OS 32 bit images are based primarily on Raspbian, while
+## Supported Architectures
-Raspberry Pi OS 64 bit images are based primarily on Debian.
 
-**Note**: 32 bit images should be built from the `master` branch.
+| Arch    | Target                        | Output         |
-64 bit images should be built from the `arm64` branch.
+|---------|-------------------------------|----------------|
+| `arm64` | Raspberry Pi 3/4/5 (64-bit)  | `.squashfs` / `.img` |
+| `amd64` | x86_64 PCs                   | `.squashfs`    |
 
-## Dependencies
+## Build Host Requirements
 
-pi-gen runs on Debian-based operating systems released after 2017, and we
+The build must run on a Debian-based Linux host. Ubuntu 22.04+ or Debian Bookworm/Trixie are recommended.
-always advise you use the latest OS for security reasons.
 
-On other Linux distributions it may be possible to use the Docker build described
+Install dependencies:
-below.
-
-To install the required dependencies for `pi-gen` you should run:
 
 ```bash
-apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
+sudo apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
 dosfstools libarchive-tools libcap2-bin grep rsync xz-utils file git curl bc \
-gpg pigz xxd arch-test
+gpg pigz xxd arch-test squashfs-tools xorriso grub-common
 ```
 
-The file `depends` contains a list of tools needed.  The format of this
+The `depends` file in the repo root lists all required tools in `<tool>[:<debian-package>]` format.
-package is `<tool>[:<debian-package>]`.
 
-## Getting started with building your images
+## Cloning
-
-Getting started is as simple as cloning this repository on your build machine. You
-can do so with:
 
 ```bash
-git clone https://github.com/RPI-Distro/pi-gen.git
+git clone https://github.com/oxmc/VesperOS.git
+cd VesperOS
 ```
 
-`--depth 1` can be added after `git clone` to create a shallow clone, only containing
+Do not clone to a path containing spaces — `debootstrap` does not support them.
-the latest revision of the repository. Do not do this on your development machine.
 
-Also, be careful to clone the repository to a base path **NOT** containing spaces.
+## Configuration
-This configuration is not supported by debootstrap and will lead to `pi-gen` not
-running.
 
-After cloning the repository, you can move to the next step and start configuring
+Use one of the provided configs in `configs/`:
-your build.
+
+```bash
+sudo ./build.sh -c configs/amd64
+sudo ./build.sh -c configs/arm64
+sudo ./build.sh -c configs/rpi4
+```
+
+Or create your own. See [config.md](config.md) for all available options. At minimum set:
+
+```bash
+ARCH='amd64'          # or arm64
+EXPORTS="stage3:squashfs"
+```
+
+## Building
+
+```bash
+sudo ./build.sh -c configs/amd64
+```
+
+Output files are placed in `deploy/`.
+
+- `squashfs` builds produce a `.squashfs` (and `-live.squashfs` if `LIVEBOOT=1`).
+- `img` builds produce a `.img` file you can flash with Balena Etcher or `dd`.
+
+## Skipping Stages (Faster Iteration)
+
+Add a `SKIP` file to any stage you don't want to re-run:
+
+```bash
+# Skip stages 0-2 to iterate on stage3 only
+touch stage0/SKIP stage1/SKIP stage2/SKIP
+sudo CLEAN=1 ./build.sh -c configs/amd64
+```
+
+Remove the `SKIP` files before a full clean build.

docs/how-the-build-process-works.md

@@ -1,43 +1,56 @@
-## How the build process works
+# How the Build Process Works
 
-The following process is followed to build images:
+`build.sh` iterates through stage directories in alphanumeric order and processes each one.
 
- * Iterate through all of the stage directories in alphanumeric order
+## Stage Processing
 
- * Bypass a stage directory if it contains a file called
+For each stage directory:
-   "SKIP"
 
- * Run the script `prerun.sh` which is generally just used to copy the build
+1. Skip the stage entirely if a `SKIP` file is present.
-   directory between stages.
+2. Run `prerun.sh` — typically copies the rootfs from the previous stage.
+3. Iterate through each numbered subdirectory (e.g. `00-configure-apt`, `01-sys-tweaks`) in order.
+4. Within each subdirectory, process these files if present:
 
- * In each stage directory iterate through each subdirectory and then run each of the
+| File | Description |
-   install scripts it contains, again in alphanumeric order. **These need to be named
+|------|-------------|
-   with a two digit padded number at the beginning.**
+| `00-run.sh` | Shell script run on the host (must be executable) |
-   There are a number of different files and directories which can be used to
+| `00-run-chroot.sh` | Shell script run inside the chroot (must be executable) |
-   control different parts of the build process:
+| `00-debconf` | Passed to `debconf-set-selections` |
+| `00-packages` | Packages installed via `apt-get install` |
+| `00-packages-nr` | Same, but with `--no-install-recommends` |
+| `00-packages-<arch>` | Arch-specific packages (e.g. `00-packages-amd64`, `00-packages-arm-only`) |
+| `00-packages-nr-<arch>` | Arch-specific packages without recommends |
+| `00-patches` | Directory of quilt patches applied to the rootfs |
+| `00-patches-<arch>` | Arch-specific quilt patches |
 
-     - **00-run.sh** - A unix shell script. Needs to be made executable for it to run.
+## Export Pipeline
 
-     - **00-run-chroot.sh** - A unix shell script which will be run in the chroot
+After all stages are processed, the build runs the export pipelines declared in the config via the `EXPORTS` variable:
-       of the image build directory. Needs to be made executable for it to run.
 
-     - **00-debconf** - Contents of this file are passed to debconf-set-selections
+```bash
-       to configure things like locale, etc.
+EXPORTS="stage3:squashfs"          # single export
+EXPORTS="stage3:squashfs stage2:img"  # multiple exports
+```
 
-     - **00-packages** - A list of packages to install. Can have more than one, space
+| Export type | Pipeline | Output |
-       separated, per line.
+|-------------|----------|--------|
+| `squashfs` | `exports/squashfs/` | `.squashfs` filesystem archive |
+| `img` | `exports/img/` | `.img` disk image |
+| `noobs` | `exports/noobs/` | NOOBS-compatible archive |
 
-     - **00-packages-nr** - As 00-packages, except these will be installed using
+### squashfs pipeline
-       the `--no-install-recommends -y` parameters to apt-get.
 
-     - **00-patches** - A directory containing patch files to be applied, using quilt.
+1. `prerun.sh` — rsync rootfs into work dir
-       If a file named 'EDIT' is present in the directory, the build process will
+2. `01-set-sources` — clean apt sources
-       be interrupted with a bash session, allowing an opportunity to create/revise
+3. `02-network` — configure resolv.conf
-       the patches.
+4. `03-finalise` — rebuild initramfs, clean up rootfs
+5. `04-export` — build squashfs; if `LIVEBOOT=1`, also applies live-boot config and produces a second `-live` squashfs
 
-  * If the stage directory contains files called "EXPORT_NOOBS" or "EXPORT_IMAGE" then
+## Arch-Specific Logic
-    add this stage to a list of images to generate
 
-  * Generate the images for any stages that have specified them
+Scripts and package files support arch suffixes:
+- `-arm-only` — runs on `arm64` and `armhf` only
+- `-amd64` — runs on `amd64` only
+- `-${ARCH}` — can be any specific arch string
 
-It is recommended to examine build.sh for finer details.
+Scripts that handle arch themselves check `${ARCH}` and exit early if not applicable.

docs/stage-anatomy.md

@@ -1,84 +1,61 @@
-## Stage Anatomy
+# Stage Anatomy
 
-### Raspbian Stage Overview
+VesperOS is built in stages. Each stage builds on the previous one.
 
-The build of Raspbian is divided up into several stages for logical clarity
+## Stages
-and modularity.  This causes some initial complexity, but it simplifies
-maintenance and allows for more easy customization.
 
- - **Stage 0** - bootstrap.  The primary purpose of this stage is to create a
+### Stage 0 — Bootstrap
-   usable filesystem.  This is accomplished largely through the use of
-   `debootstrap`, which creates a minimal filesystem suitable for use as a
-   base.tgz on Debian systems.  This stage also configures apt settings and
-   installs `raspberrypi-bootloader` which is missed by debootstrap.  The
-   minimal core is installed but not configured. As a result, this stage will not boot.
 
- - **Stage 1** - truly minimal system.  This stage makes the system bootable by
+Bootstraps a minimal Debian Trixie filesystem using `debootstrap`. Configures apt sources (including the VesperOS apt repo), installs firmware packages, and sets up the base package state. Does not produce a bootable system.
-   installing system files like `/etc/fstab`, configures the bootloader, makes
-   the network operable, and installs packages like raspi-config.  At this
-   stage the system should boot to a local console from which you have the
-   means to perform basic tasks needed to configure and install the system.
 
- - **Stage 2** - lite system.  This stage produces the Raspberry Pi OS Lite image.
+- RPi: installs `raspi-firmware`, `linux-image-rpi-v8`, `linux-image-rpi-2712`
-   Stage 2 installs some optimized memory functions, sets timezone and charmap
+- amd64: installs `grub2`, `linux-image-amd64`
-   defaults, installs fake-hwclock and ntp, wireless LAN and bluetooth support,
-   dphys-swapfile, and other basics for managing the hardware.  It also
-   creates necessary groups and gives the pi user access to sudo and the
-   standard console hardware permission groups.
 
-   Note: Raspberry Pi OS Lite contains a number of tools for development,
+### Stage 1 — Minimal Bootable System
-   including `Python`, `Lua` and the `build-essential` package. If you are
-   creating an image to deploy in products, be sure to remove extraneous development
-   tools before deployment.
 
- - **Stage 3** - desktop system.  Here's where you get the full desktop system
+Makes the system bootable. Installs `/etc/fstab` (arch-specific), configures the hostname, locale, and basic networking. At this stage the system can boot to a console.
-   with X11 and LXDE, web browsers, git for development, Raspberry Pi OS custom UI
-   enhancements, etc.  This is a base desktop system, with some development
-   tools installed.
 
- - **Stage 4** - Normal Raspberry Pi OS image. System meant to fit on a 4GB card.
+- RPi fstab: `/boot/firmware` (vfat) + btrfs root with subvolumes
-   This is the    stage that installs most things that make Raspberry Pi OS friendly
+- amd64 fstab: `/boot` (vfat) + `/boot/efi` + btrfs root with subvolumes
-   to new users - e.g. system documentation.
 
- - **Stage 5** - The Raspberry Pi OS Full image. More development
+Both use btrfs subvolumes: `@`, `@home`, `@var`, `@snapshots`.
-   tools, an email client, learning tools like Scratch, specialized packages
-   like sonic-pi, office productivity, etc.
 
-### Stage specification
+### Stage 2 — System Layer
 
-If you wish to build up to a specified stage (such as building up to stage 2
+Installs the core system utilities, tools, and services. This is the "lite" layer.
-for a lite system), place an empty file named `SKIP` in each of the `./stage`
-directories you wish not to include.
 
-Then add an empty file named `SKIP_IMAGES` to `./stage4` and `./stage5` (if building up to stage 2) or
+Key additions:
-to `./stage2` (if building a minimal system).
+- `zsh` as the system-wide default shell
+- `btrfs-progs` + `snapper` for filesystem snapshots
+- `cloud-init` + `netplan` for first-boot configuration
+- Bluetooth, Wi-Fi, avahi, SSH, cups, and other system services
+- Python 3, Lua, build tools
+
+### Stage 3 — Desktop
+
+Installs the full GNOME desktop environment and user-facing applications.
+
+Key additions:
+- GNOME Shell and core apps
+- Firefox ESR
+- amd64: `live-boot`, `live-config`, `live-config-systemd`, `grub-efi-amd64`
+
+This stage triggers the export pipeline via `EXPORT_ISO` and/or `EXPORT_SQUASHFS` for amd64, and `EXPORT_IMAGE` for RPi.
+
+## Export Outputs
+
+| Stage | Arch | Marker | Output |
+|-------|------|--------|--------|
+| stage3 | amd64 | `EXPORT_ISO` | Bootable live ISO |
+| stage3 | amd64 | `EXPORT_SQUASHFS` | Raw squashfs archive |
+| stage3 | arm64/armhf | `EXPORT_IMAGE` | Flashable `.img` |
+
+## Skipping Stages for Development
+
+Place a `SKIP` file in any stage directory to skip it. Use `SKIP_IMAGES` to prevent an export from running without skipping the stage itself.
 
 ```bash
-# Example for building a lite system
+# Only rebuild stage3 (assumes stage0-2 already built)
-echo "IMG_NAME='raspios'" > config
+touch stage0/SKIP stage1/SKIP stage2/SKIP
-touch ./stage3/SKIP ./stage4/SKIP ./stage5/SKIP
+sudo CLEAN=1 ./build.sh -c config
-touch ./stage4/SKIP_IMAGES ./stage5/SKIP_IMAGES
-sudo ./build.sh  # or ./build-docker.sh
 ```
-
-If you wish to build further configurations upon (for example) the lite
-system, you can also delete the contents of `./stage3` and `./stage4` and
-replace with your own contents in the same format.
-
-
-## Skipping stages to speed up development
-
-If you're working on a specific stage the recommended development process is as
-follows:
-
- * Add a file called SKIP_IMAGES into the directories containing EXPORT_* files
-   (currently stage2, stage4 and stage5)
- * Add SKIP files to the stages you don't want to build. For example, if you're
-   basing your image on the lite image you would add these to stages 3, 4 and 5.
- * Run build.sh to build all stages
- * Add SKIP files to the earlier successfully built stages
- * Modify the last stage
- * Rebuild just the last stage using `sudo CLEAN=1 ./build.sh` (or, for docker builds
-   `PRESERVE_CONTAINER=1 CONTINUE=1 CLEAN=1 ./build-docker.sh`)
- * Once you're happy with the image you can remove the SKIP_IMAGES files and
-   export your image to test

docs/troubleshooting.md

@@ -1,45 +1,59 @@
 # Troubleshooting
 
-## `64 Bit Systems`
+## binfmt_misc (cross-arch builds)
-A 64 bit image can be generated from the `arm64` branch in this repository. Just
-replace the command from [this section](#getting-started-with-building-your-images)
-by the one below, and follow the rest of the documentation:
-```bash
-git clone --branch arm64 https://github.com/RPI-Distro/pi-gen.git
-```
 
-If you want to generate a 64 bits image from a Raspberry Pi running a 32 bits
+When building ARM images on an x86_64 host, Linux uses `binfmt_misc` to run ARM binaries via QEMU. If you see:
-version, you need to add `arm_64bit=1` to your `config.txt` file and reboot your
-machine. This will restart your machine with a 64 bits kernel. This will only
-work from a Raspberry Pi with a 64-bit capable processor (i.e. Raspberry Pi Zero
-2, Raspberry Pi 3 or Raspberry Pi 4).
-
-
-## `binfmt_misc`
-
-Linux is able to execute binaries from other architectures, meaning that it should be
-possible to make use of `pi-gen` on an x86_64 system, even though it will be running
-ARM binaries. This requires support from the [`binfmt_misc`](https://en.wikipedia.org/wiki/Binfmt_misc)
-kernel module.
-
-You may see one of the following errors:
 
 ```
 update-binfmts: warning: Couldn't load the binfmt_misc module.
-```
-```
-W: Failure trying to run: chroot "/pi-gen/work/test/stage0/rootfs" /bin/true
-and/or
 chroot: failed to run command '/bin/true': Exec format error
 ```
 
-To resolve this, ensure that the following files are available (install them if necessary):
+Fix:
 
-```
+```bash
-/lib/modules/$(uname -r)/kernel/fs/binfmt_misc.ko
+sudo modprobe binfmt_misc
-/usr/bin/qemu-aarch64-static
+sudo apt-get install qemu-user-static binfmt-support
+sudo update-binfmts --enable
 ```
 
-You may also need to load the module by hand - run `modprobe binfmt_misc`.
+On WSL2 you may need to install `binfmt-support` on the host Windows side or use Docker instead.
 
-If you are using WSL to build you may have to enable the service `sudo update-binfmts --enable`
+## "Required dependencies not installed"
+
+The `depends` file lists tools that must be present on the build host. Read the README for the current install commands.
+
+Note: `grub-efi-amd64-bin` and `grub-pc-bin` are data packages with no associated binary — they are not checked by the dependency checker but must be installed for `grub-mkrescue` to work.
+
+## ISO doesn't boot
+
+- Verify the ISO was written correctly: use Balena Etcher or `dd` — do not just copy the file.
+- In VMware/VirtualBox, set firmware to UEFI.
+- If GRUB appears but the system hangs after selecting a menu entry, try the "safe mode" entry (adds `nomodeset`).
+
+## Squashfs / initramfs errors during export-iso
+
+- `mkinitramfs: failed to determine device for /` — This happens when `MODULES=dep` is set in a chroot. The build sets `MODULES=most` to avoid this.
+- `W: Couldn't identify type of root file system` — Expected during initramfs generation in a live build; the fstab is rewritten for live-boot and has no real block devices to detect.
+
+## Stage fails despite SKIP file
+
+`SKIP` files only skip re-running the stage scripts. They do not skip the export pipeline. Use `SKIP_IMAGES` to skip exports while still running the stage.
+
+## Build fails on NTFS / exFAT partition
+
+The work directory must be on a Linux filesystem (ext4, btrfs, xfs). NTFS and exFAT do not support the required file attributes. Set `WORK_DIR` to a path on a Linux filesystem:
+
+```bash
+export WORK_DIR=/mnt/linux-disk/vesperos-work
+```
+
+## Apt errors: "doesn't support architecture"
+
+The VesperOS apt repo (`cdn.oxmc.me/apt`) currently only supports `arm64`/`armhf`. On amd64 builds you will see:
+
+```
+Notice: Skipping ... doesn't support architecture 'amd64'
+```
+
+This is expected and not an error — standard Debian repos are used for amd64 packages.

export-iso/03-set-partuuid/00-run.sh

@@ -1,15 +0,0 @@
-#!/bin/bash -e
-
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
-
-IMGID="$(dd if="${IMG_FILE}" skip=440 bs=1 count=4 2>/dev/null | xxd -e | cut -f 2 -d' ')"
-
-BOOT_PARTUUID="${IMGID}-01"
-ROOT_PARTUUID="${IMGID}-02"
-#HOME_PARTUUID="${IMGID}-03"
-
-sed -i "s/BOOTDEV/PARTUUID=${BOOT_PARTUUID}/" "${ROOTFS_DIR}/etc/fstab"
-sed -i "s/ROOTDEV/PARTUUID=${ROOT_PARTUUID}/" "${ROOTFS_DIR}/etc/fstab"
-#sed -i "s/HOMEDEV/PARTUUID=${HOME_PARTUUID}/" "${ROOTFS_DIR}/etc/fstab"
-
-sed -i "s/ROOTDEV/PARTUUID=${ROOT_PARTUUID}/" "${ROOTFS_DIR}/boot/firmware/cmdline.txt"

export-iso/04-finalise/01-run.sh

@@ -1,141 +0,0 @@
-#!/bin/bash -e
-
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
-INFO_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.info"
-SBOM_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.sbom"
-BMAP_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.bmap"
-
-on_chroot << EOF
-update-initramfs -k all -c
-if [ -x /etc/init.d/fake-hwclock ]; then
-	/etc/init.d/fake-hwclock stop
-fi
-if hash hardlink 2>/dev/null; then
-	hardlink -t /usr/share/doc
-fi
-EOF
-
-if [ -f "${ROOTFS_DIR}/etc/initramfs-tools/update-initramfs.conf" ]; then
-	sed -i 's/^update_initramfs=.*/update_initramfs=yes/' "${ROOTFS_DIR}/etc/initramfs-tools/update-initramfs.conf"
-	sed -i 's/^MODULES=.*/MODULES=dep/' "${ROOTFS_DIR}/etc/initramfs-tools/initramfs.conf"
-fi
-
-#if [ -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.config" ]; then
-#	chmod 700 "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.config"
-#fi
-
-rm -f "${ROOTFS_DIR}/usr/bin/qemu-arm-static"
-
-if [ "${USE_QEMU}" != "1" ]; then
-	if [ -e "${ROOTFS_DIR}/etc/ld.so.preload.disabled" ]; then
-		mv "${ROOTFS_DIR}/etc/ld.so.preload.disabled" "${ROOTFS_DIR}/etc/ld.so.preload"
-	fi
-fi
-
-rm -f "${ROOTFS_DIR}/etc/network/interfaces.dpkg-old"
-
-rm -f "${ROOTFS_DIR}/etc/apt/sources.list~"
-rm -f "${ROOTFS_DIR}/etc/apt/trusted.gpg~"
-
-rm -f "${ROOTFS_DIR}/etc/passwd-"
-rm -f "${ROOTFS_DIR}/etc/group-"
-rm -f "${ROOTFS_DIR}/etc/shadow-"
-rm -f "${ROOTFS_DIR}/etc/gshadow-"
-rm -f "${ROOTFS_DIR}/etc/subuid-"
-rm -f "${ROOTFS_DIR}/etc/subgid-"
-
-rm -f "${ROOTFS_DIR}"/var/cache/debconf/*-old
-rm -f "${ROOTFS_DIR}"/var/lib/dpkg/*-old
-
-rm -f "${ROOTFS_DIR}"/usr/share/icons/*/icon-theme.cache
-
-rm -f "${ROOTFS_DIR}/var/lib/dbus/machine-id"
-
-true > "${ROOTFS_DIR}/etc/machine-id"
-
-ln -nsf /proc/mounts "${ROOTFS_DIR}/etc/mtab"
-
-find "${ROOTFS_DIR}/var/log/" -type f -exec cp /dev/null {} \;
-
-rm -f "${ROOTFS_DIR}/root/.vnc/private.key"
-rm -f "${ROOTFS_DIR}/etc/vnc/updateid"
-
-update_issue "$(basename "${EXPORT_DIR}")"
-install -m 644 "${ROOTFS_DIR}/etc/rpi-issue" "${ROOTFS_DIR}/boot/firmware/issue.txt"
-if ! [ -L "${ROOTFS_DIR}/boot/issue.txt" ]; then
-	ln -s firmware/issue.txt "${ROOTFS_DIR}/boot/issue.txt"
-fi
-
-cp "$ROOTFS_DIR/etc/rpi-issue" "$INFO_FILE"
-
-{
-	if [ -f "$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" ]; then
-		firmware=$(zgrep "firmware as of" \
-			"$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" | \
-			head -n1 | sed  -n 's|.* \([^ ]*\)$|\1|p')
-		printf "\nFirmware: https://github.com/raspberrypi/firmware/tree/%s\n" "$firmware"
-
-		kernel="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/git_hash")"
-		printf "Kernel: https://github.com/raspberrypi/linux/tree/%s\n" "$kernel"
-
-		uname="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/uname_string7")"
-		printf "Uname string: %s\n" "$uname"
-	fi
-
-	printf "\nPackages:\n"
-	dpkg -l --root "$ROOTFS_DIR"
-} >> "$INFO_FILE"
-
-if hash syft 2>/dev/null; then
-	syft scan dir:"${ROOTFS_DIR}" \
-		--base-path="${ROOTFS_DIR}" \
-		--source-name="${IMG_NAME}${IMG_SUFFIX}" \
-		--source-version="${IMG_DATE}" \
-		-o spdx-json="${SBOM_FILE}"
-fi
-
-ROOT_DEV="$(awk "\$2 == \"${ROOTFS_DIR}\" {print \$1}" /etc/mtab)"
-
-unmount "${ROOTFS_DIR}"
-zerofree "${ROOT_DEV}"
-
-unmount_image "${IMG_FILE}"
-
-if hash bmaptool 2>/dev/null; then
-	bmaptool create \
-		-o "${BMAP_FILE}" \
-		"${IMG_FILE}"
-fi
-
-mkdir -p "${DEPLOY_DIR}"
-
-rm -f "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.*"
-rm -f "${DEPLOY_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
-
-case "${DEPLOY_COMPRESSION}" in
-zip)
-	pushd "${STAGE_WORK_DIR}" > /dev/null
-	zip -"${COMPRESSION_LEVEL}" \
-	"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.zip" "$(basename "${IMG_FILE}")"
-	popd > /dev/null
-	;;
-gz)
-	pigz --force -"${COMPRESSION_LEVEL}" "$IMG_FILE" --stdout > \
-	"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.img.gz"
-	;;
-xz)
-	xz --compress --force --threads 0 --memlimit-compress=50% -"${COMPRESSION_LEVEL}" \
-	--stdout "$IMG_FILE" > "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.img.xz"
-	;;
-none | *)
-	cp "$IMG_FILE" "$DEPLOY_DIR/"
-;;
-esac
-
-if [ -f "${SBOM_FILE}" ]; then
-	xz -c "${SBOM_FILE}" > "$DEPLOY_DIR/image_$(basename "${SBOM_FILE}").xz"
-fi
-if [ -f "${BMAP_FILE}" ]; then
-	xz -c "${BMAP_FILE}" > "$DEPLOY_DIR/image_$(basename "${BMAP_FILE}").xz"
-fi
-cp "$INFO_FILE" "$DEPLOY_DIR/"

export-iso/prerun.sh

@@ -1,134 +0,0 @@
-#!/bin/bash -e
-
-IMG_NAME="${IMG_FILENAME}${IMG_SUFFIX}"
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_NAME}.img"
-MOUNT_DIR="${ROOTFS_DIR}"
-BOOT_SIZE=$((512 * 1024 * 1024))
-EFI_SIZE=$((128 * 1024 * 1024)) # 128MB EFI partition
-RECOVERY_SIZE=$((256 * 1024 * 1024))
-ALIGN=$((4 * 1024 * 1024))
-
-unmount_image "${IMG_FILE}"
-rm -f "${IMG_FILE}"
-rm -rf "${MOUNT_DIR}"
-mkdir -p "${MOUNT_DIR}"
-
-# Calculate rootfs size
-ROOT_SIZE=$(du -x --apparent-size -s "${EXPORT_ROOTFS_DIR}" --exclude var/cache/apt/archives --exclude boot/firmware --block-size=1 | cut -f 1)
-ROOT_MARGIN="$(echo "($ROOT_SIZE * 0.2 + 200 * 1024 * 1024) / 1" | bc)"
-BOOT_PART_START=$((ALIGN))
-BOOT_PART_SIZE=$(((BOOT_SIZE + ALIGN - 1) / ALIGN * ALIGN))
-EFI_PART_START=$((BOOT_PART_START + BOOT_PART_SIZE))
-EFI_PART_SIZE=$(((EFI_SIZE + ALIGN - 1) / ALIGN * ALIGN))
-ROOT_PART_START=$((EFI_PART_START + EFI_PART_SIZE))
-ROOT_PART_SIZE=$(((ROOT_SIZE + ROOT_MARGIN + ALIGN - 1) / ALIGN * ALIGN))
-RECOVERY_PART_START=$((ROOT_PART_START + ROOT_PART_SIZE))
-RECOVERY_PART_SIZE=$(((RECOVERY_SIZE + ALIGN - 1) / ALIGN * ALIGN))
-IMG_SIZE=$((BOOT_PART_START + BOOT_PART_SIZE + EFI_PART_SIZE + ROOT_PART_SIZE + RECOVERY_PART_SIZE))
-
-# Create raw image
-truncate -s "${IMG_SIZE}" "${IMG_FILE}"
-parted --script "${IMG_FILE}" mklabel gpt
-parted --script "${IMG_FILE}" unit B mkpart primary fat32 "${BOOT_PART_START}" "$((BOOT_PART_START + BOOT_PART_SIZE - 1))"
-parted --script "${IMG_FILE}" set 1 boot on
-parted --script "${IMG_FILE}" unit B mkpart primary fat32 "${EFI_PART_START}" "$((EFI_PART_START + EFI_PART_SIZE - 1))"
-parted --script "${IMG_FILE}" set 2 esp on
-parted --script "${IMG_FILE}" unit B mkpart primary ext4 "${ROOT_PART_START}" "$((ROOT_PART_START + ROOT_PART_SIZE - 1))"
-parted --script "${IMG_FILE}" unit B mkpart primary ext4 "${RECOVERY_PART_START}" "$((RECOVERY_PART_START + RECOVERY_PART_SIZE - 1))"
-
-# Create loop device
-cnt=0
-until ensure_next_loopdev && LOOP_DEV="$(losetup --show --find --partscan "$IMG_FILE")"; do
-    ((cnt++))
-    if [ $cnt -ge 5 ]; then echo "ERROR: losetup failed"; exit 1; fi
-    echo "Retrying losetup..."; sleep 5
-done
-ensure_loopdev_partitions "$LOOP_DEV"
-
-BOOT_DEV="${LOOP_DEV}p1"
-EFI_DEV="${LOOP_DEV}p2"
-ROOT_DEV="${LOOP_DEV}p3"
-RECOVERY_DEV="${LOOP_DEV}p4"
-
-# Format partitions
-FAT_SIZE=$([ "$BOOT_SIZE" -lt 134742016 ] && echo 16 || echo 32)
-mkdosfs -n bootfs -F "$FAT_SIZE" -s 4 "$BOOT_DEV"
-mkfs.fat -F 32 -n EFI "$EFI_DEV"
-mkfs.ext4 -L rootfs -O "^64bit,^huge_file" "$ROOT_DEV"
-mkfs.ext4 -L recovery "$RECOVERY_DEV"
-
-
-# Mount and copy rootfs
-mount "$ROOT_DEV" "$MOUNT_DIR" -t ext4
-mkdir -p "${MOUNT_DIR}/boot"
-mount "$BOOT_DEV" "${MOUNT_DIR}/boot" -t vfat
-mkdir -p "${MOUNT_DIR}/boot/efi"
-mount "$EFI_DEV" "${MOUNT_DIR}/boot/efi" -t vfat
-rsync -aHAXx --exclude /var/cache/apt/archives --exclude /boot/firmware --exclude /boot/overlays "${EXPORT_ROOTFS_DIR}/" "${MOUNT_DIR}/"
-
-# Recovery partition
-mkdir -p "${MOUNT_DIR}/recovery"
-mount "$RECOVERY_DEV" "${MOUNT_DIR}/recovery" -t ext4
-# Optionally copy recovery tools
-# cp recovery-tools/recovery.sh "${MOUNT_DIR}/recovery/"
-
-# Install GRUB (BIOS)
-mkdir -p "${MOUNT_DIR}/boot/grub"
-cat > "${MOUNT_DIR}/boot/grub/grub.cfg" <<EOF
-set default=0
-set timeout=5
-
-menuentry "Linux" {
-    linux /boot/vmlinuz root=/dev/sda3
-    initrd /boot/initrd.img
-}
-EOF
-
-grub-install \
-  --target=i386-pc \
-  --boot-directory="${MOUNT_DIR}/boot" \
-  --modules="part_msdos ext2 fat normal biosdisk" \
-  --force \
-  --no-floppy \
-  --boot-directory="${MOUNT_DIR}/boot" \
-  "$LOOP_DEV"
-
-# Install GRUB (UEFI)
-mkdir -p "${MOUNT_DIR}/boot/efi/EFI/boot"
-grub-install \
-  --target=x86_64-efi \
-  --efi-directory="${MOUNT_DIR}/boot/efi" \
-  --boot-directory="${MOUNT_DIR}/boot" \
-  --removable \
-  --no-nvram \
-  --modules="part_gpt part_msdos ext2 fat normal efi_gop efi_uga biosdisk" \
-  --bootloader-id=GRUB \
-  --recheck
-
-# Unmount all
-umount -l "${MOUNT_DIR}/boot/efi"
-umount -l "${MOUNT_DIR}/boot"
-umount -l "${MOUNT_DIR}/recovery"
-umount -l "${MOUNT_DIR}"
-losetup -d "$LOOP_DEV"
-
-# Create hybrid ISO using xorriso (make sure it's installed)
-ISO_FILE="${STAGE_WORK_DIR}/${IMG_NAME}.iso"
-EFI_IMG="${STAGE_WORK_DIR}/efi.img"
-dd if=/dev/zero of="${EFI_IMG}" bs=1M count=128
-mkfs.vfat "${EFI_IMG}"
-mmd -i "${EFI_IMG}" ::/EFI ::/EFI/boot
-mcopy -i "${EFI_IMG}" "${MOUNT_DIR}/boot/efi/EFI/boot/bootx64.efi" ::/EFI/boot/bootx64.efi
-xorriso -as mkisofs \
-  -r -J -joliet -l \
-  -b boot/grub/i386-pc/eltorito.img \
-  -no-emul-boot -boot-load-size 4 -boot-info-table \
-  -eltorito-alt-boot \
-  -e efi.img \
-  -no-emul-boot \
-  -isohybrid-gpt-basdat \
-  -o "${ISO_FILE}" \
-  "${MOUNT_DIR}" \
-  --efi-boot-part --efi-boot-image --protective-msdos-label
-
-echo "Bootable ISO with BIOS and UEFI support created at ${ISO_FILE}"

exports/squashfs/00-allow-rerun/00-run.sh

@@ -1,11 +1,7 @@
 #!/bin/bash -e
 
 if [[ "${ARCH}" == "arm64" || "${ARCH}" == "armhf" ]]; then
-	if [ ! -x "${ROOTFS_DIR}/usr/bin/qemu-arm-static" ]; then
-		cp /usr/bin/qemu-arm-static "${ROOTFS_DIR}/usr/bin/"
-	fi
-
 	if [ -e "${ROOTFS_DIR}/etc/ld.so.preload" ]; then
 		mv "${ROOTFS_DIR}/etc/ld.so.preload" "${ROOTFS_DIR}/etc/ld.so.preload.disabled"
 	fi
-fi
+fi

exports/squashfs/01-set-sources/01-run.sh

@@ -1,10 +1,10 @@
 #!/bin/bash -e
 
 rm -f "${ROOTFS_DIR}/etc/apt/apt.conf.d/51cache"
+rm -f "${ROOTFS_DIR}/etc/apt/sources.list.d/00-temp.list"
 find "${ROOTFS_DIR}/var/lib/apt/lists/" -type f -delete
 on_chroot << EOF
 apt-get update
 apt-get -y dist-upgrade --auto-remove --purge
 apt-get clean
-apt-file update
 EOF

exports/squashfs/03-finalise/01-run.sh

@@ -0,0 +1,53 @@
+#!/bin/bash -e
+
+# Ensure update-initramfs actually runs — it silently exits if update_initramfs=no/disabled,
+# which may have been set during the build to suppress apt-hook rebuilds.
+if [ -f "${ROOTFS_DIR}/etc/initramfs-tools/update-initramfs.conf" ]; then
+	sed -i 's/^update_initramfs=.*/update_initramfs=yes/' "${ROOTFS_DIR}/etc/initramfs-tools/update-initramfs.conf"
+fi
+
+on_chroot <<- EOF
+	# Ensure Plymouth plymouthd.conf has the correct theme before packing initramfs.
+	# update-alternatives only sets the symlink; the initramfs hook reads plymouthd.conf.
+	if which plymouth-set-default-theme > /dev/null 2>&1; then
+		plymouth-set-default-theme vesperos
+	fi
+	update-initramfs -k all -c
+	if hash hardlink 2>/dev/null; then
+		hardlink -t /usr/share/doc
+	fi
+	if [ -f /usr/lib/systemd/system/apt-listchanges.service ]; then
+		python3 -m apt_listchanges.populate_database --profile apt
+		systemctl disable apt-listchanges.timer
+	fi
+	install -m 755 -o systemd-timesync -g systemd-timesync -d /var/lib/systemd/timesync
+	install -m 644 -o systemd-timesync -g systemd-timesync /dev/null /var/lib/systemd/timesync/clock
+EOF
+
+rm -f "${ROOTFS_DIR}/usr/bin/qemu-arm-static"
+
+if [ "${USE_QEMU}" != "1" ]; then
+	if [ -e "${ROOTFS_DIR}/etc/ld.so.preload.disabled" ]; then
+		mv "${ROOTFS_DIR}/etc/ld.so.preload.disabled" "${ROOTFS_DIR}/etc/ld.so.preload"
+	fi
+fi
+
+rm -f "${ROOTFS_DIR}/etc/network/interfaces.dpkg-old"
+rm -f "${ROOTFS_DIR}/etc/apt/sources.list~"
+rm -f "${ROOTFS_DIR}/etc/apt/trusted.gpg~"
+rm -f "${ROOTFS_DIR}/etc/passwd-"
+rm -f "${ROOTFS_DIR}/etc/group-"
+rm -f "${ROOTFS_DIR}/etc/shadow-"
+rm -f "${ROOTFS_DIR}/etc/gshadow-"
+rm -f "${ROOTFS_DIR}/etc/subuid-"
+rm -f "${ROOTFS_DIR}/etc/subgid-"
+rm -f "${ROOTFS_DIR}"/var/cache/debconf/*-old
+rm -f "${ROOTFS_DIR}"/var/lib/dpkg/*-old
+rm -f "${ROOTFS_DIR}"/usr/share/icons/*/icon-theme.cache
+rm -f "${ROOTFS_DIR}/var/lib/dbus/machine-id"
+
+echo "uninitialized" > "${ROOTFS_DIR}/etc/machine-id"
+
+ln -nsf /proc/mounts "${ROOTFS_DIR}/etc/mtab"
+
+find "${ROOTFS_DIR}/var/log/" -type f -exec cp /dev/null {} \;

exports/squashfs/03-finalise/files/9999-vesperos-dconf

@@ -0,0 +1,14 @@
+#!/bin/sh
+# Runs at live boot only. Sets DCONF_PROFILE=live for the live user
+# so the live dconf database is used instead of the installed default.
+
+# Source live-config variables (provides LIVE_USERNAME etc.)
+. /etc/live/config.conf 2>/dev/null || true
+LIVE_USER="${LIVE_USERNAME:-vesperos}"
+LIVE_HOME="/home/${LIVE_USER}"
+
+if [ -d "${LIVE_HOME}" ]; then
+    mkdir -p "${LIVE_HOME}/.config/environment.d"
+    echo 'DCONF_PROFILE=live' > "${LIVE_HOME}/.config/environment.d/dconf.conf"
+    chown -R "${LIVE_USER}:${LIVE_USER}" "${LIVE_HOME}/.config"
+fi

exports/squashfs/03-finalise/files/dconf-profile-live-user

@@ -0,0 +1,3 @@
+user-db:user
+system-db:live
+system-db:local

exports/squashfs/03-finalise/files/live-default-settings

@@ -0,0 +1,4 @@
+#[org/gnome/desktop/background]
+#picture-uri='file:///usr/share/backgrounds/vesperos-live.png'
+#picture-uri-dark='file:///usr/share/backgrounds/vesperos-live.png'
+#picture-options='zoom'

exports/squashfs/04-export/01-run.sh

@@ -0,0 +1,222 @@
+#!/bin/bash -e
+
+SQUASHFS_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.squashfs"
+
+unmount "${ROOTFS_DIR}"
+
+# ── 1. Raw squashfs ────────────────────────────────────────────────────────────
+mksquashfs "${ROOTFS_DIR}" "${SQUASHFS_FILE}" \
+	-comp xz \
+	-noappend \
+	-e boot/efi
+
+# Locate kernel and initrd inside the rootfs
+VMLINUZ=$(find "${ROOTFS_DIR}/boot" -maxdepth 1 -name "vmlinuz-*" | sort | tail -1)
+INITRD=$(find "${ROOTFS_DIR}/boot" -maxdepth 1 -name "initrd.img-*" | sort | tail -1)
+
+VMLINUZ_FILE=""
+INITRD_FILE=""
+
+if [ -n "${VMLINUZ}" ]; then
+	VMLINUZ_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.vmlinuz"
+	cp "${VMLINUZ}" "${VMLINUZ_FILE}"
+fi
+
+if [ -n "${INITRD}" ]; then
+	INITRD_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.initrd"
+	cp "${INITRD}" "${INITRD_FILE}"
+fi
+
+mkdir -p "${DEPLOY_DIR}"
+rm -f "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}."*
+
+case "${DEPLOY_COMPRESSION}" in
+zip)
+	pushd "${STAGE_WORK_DIR}" > /dev/null
+	ZIP_MEMBERS="$(basename "${SQUASHFS_FILE}")"
+	[ -n "${VMLINUZ_FILE}" ] && ZIP_MEMBERS="${ZIP_MEMBERS} $(basename "${VMLINUZ_FILE}")"
+	[ -n "${INITRD_FILE}" ] && ZIP_MEMBERS="${ZIP_MEMBERS} $(basename "${INITRD_FILE}")"
+	# shellcheck disable=SC2086
+	zip -"${COMPRESSION_LEVEL}" \
+		"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.zip" \
+		${ZIP_MEMBERS}
+	popd > /dev/null
+	echo "Archive created at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.zip"
+	;;
+gz)
+	pigz --force -"${COMPRESSION_LEVEL}" "${SQUASHFS_FILE}" --stdout > \
+		"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs.gz"
+	[ -n "${VMLINUZ_FILE}" ] && cp "${VMLINUZ_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.vmlinuz"
+	[ -n "${INITRD_FILE}" ] && cp "${INITRD_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.initrd"
+	echo "Squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs.gz"
+	;;
+xz)
+	xz --compress --force --threads 0 --memlimit-compress=50% -"${COMPRESSION_LEVEL}" \
+		--stdout "${SQUASHFS_FILE}" > "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs.xz"
+	[ -n "${VMLINUZ_FILE}" ] && cp "${VMLINUZ_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.vmlinuz"
+	[ -n "${INITRD_FILE}" ] && cp "${INITRD_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.initrd"
+	echo "Squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs.xz"
+	;;
+none | *)
+	cp "${SQUASHFS_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs"
+	[ -n "${VMLINUZ_FILE}" ] && cp "${VMLINUZ_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.vmlinuz"
+	[ -n "${INITRD_FILE}" ] && cp "${INITRD_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.initrd"
+	echo "Squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}.squashfs"
+	;;
+esac
+
+# ── 2. Liveboot squashfs (only when LIVEBOOT=1 and amd64) ──────────────────────
+if [ "${LIVEBOOT}" == "1" ]; then
+	if [ "${ARCH}" != "amd64" ]; then
+		echo "squashfs-export: skipping live boot squashfs for non-amd64 arch (${ARCH})"
+	else
+		echo "squashfs-export: applying live boot changes for liveboot squashfs"
+
+		on_chroot << EOF
+apt-get install -y \
+	live-boot \
+	live-boot-initramfs-tools \
+	live-config \
+	live-config-systemd
+EOF
+
+		# Write live-config user settings
+		mkdir -p "${ROOTFS_DIR}/etc/live"
+		cat > "${ROOTFS_DIR}/etc/live/config.conf" << EOF
+LIVE_USERNAME="${LIVE_USERNAME:-vesperos}"
+LIVE_USER_FULLNAME="${LIVE_USER_FULLNAME:-Live User}"
+LIVE_USER_DEFAULT_GROUPS="audio cdrom dip floppy video plugdev netdev bluetooth"
+LIVE_USER_SHELL="/bin/zsh"
+LIVE_USER_PASSWORD="${LIVE_USER_PASSWORD:-vesperos}"
+LIVE_LOGIN="true"
+EOF
+
+		# Rewrite fstab for the live environment.
+		# live-boot manages root via overlayfs — build-time disk entries cause fsck failures at boot.
+		cat > "${ROOTFS_DIR}/etc/fstab" << 'FSTABEOF'
+# Live system fstab — root is managed by live-boot via overlayfs, not this file.
+tmpfs   /tmp    tmpfs   defaults,nosuid,nodev   0  0
+FSTABEOF
+
+		# Remove first-boot trigger so GDM uses autologin in the live session.
+		rm -f "${ROOTFS_DIR}/var/lib/gdm/run-initial-setup"
+
+		# Make GDM wait for live-config
+		mkdir -p "${ROOTFS_DIR}/etc/systemd/system/gdm.service.d"
+		cat > "${ROOTFS_DIR}/etc/systemd/system/gdm.service.d/override.conf" << EOF
+[Unit]
+After=live-config.service
+EOF
+
+		# Enable autoLogin on GDM
+		mkdir -p "${ROOTFS_DIR}/etc/gdm3"
+		cat > "${ROOTFS_DIR}/etc/gdm3/daemon.conf" << EOF
+[daemon]
+AutomaticLoginEnable=true
+AutomaticLogin=${LIVE_USERNAME:-vesperos}
+EOF
+
+		# Configure initramfs for live boot — squashfs and overlay are required
+		if [ -f "${ROOTFS_DIR}/etc/initramfs-tools/initramfs.conf" ]; then
+			sed -i 's/^MODULES=.*/MODULES=most/' "${ROOTFS_DIR}/etc/initramfs-tools/initramfs.conf"
+		fi
+
+		for mod in squashfs overlay; do
+			grep -qx "${mod}" "${ROOTFS_DIR}/etc/initramfs-tools/modules" 2>/dev/null || \
+				echo "${mod}" >> "${ROOTFS_DIR}/etc/initramfs-tools/modules"
+		done
+
+		# Enable live-config system wide, instead of via grub
+		on_chroot << EOF
+systemctl enable live-config.service
+EOF
+
+		# Live-only dconf: separate database + profile so the live wallpaper
+		# is shown in the live session but not on the real installed system.
+		FINALISE_DIR="$(dirname "$0")/../03-finalise"
+		mkdir -p "${ROOTFS_DIR}/etc/dconf/db/live.d"
+		install -m 644 "${FINALISE_DIR}/files/live-default-settings" "${ROOTFS_DIR}/etc/dconf/db/live.d/00-default-settings"
+		install -m 644 "${FINALISE_DIR}/files/dconf-profile-live-user" "${ROOTFS_DIR}/etc/dconf/profile/live"
+
+		# Hook sets DCONF_PROFILE=live for the live user at boot
+		install -m 755 "${FINALISE_DIR}/files/9999-vesperos-dconf" "${ROOTFS_DIR}/lib/live/config/9999-vesperos-dconf"
+
+		on_chroot << EOF
+dconf update
+EOF
+
+		# Add calamares installer and related packages to the live image
+		on_chroot << EOF
+apt-get install -y calamares calamares-settings-vesperos \
+	libcrack2 cracklib-runtime \
+	grub-efi-amd64 grub-pc-bin efibootmgr \
+	parted gdisk dosfstools e2fsprogs
+EOF
+
+		# Set quiet splash after grub installs its default /etc/default/grub
+		sed -i 's/^GRUB_CMDLINE_LINUX_DEFAULT=.*/GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"/' \
+			"${ROOTFS_DIR}/etc/default/grub"
+
+		# Keep the graphical framebuffer so Plymouth can render its splash.
+		# Without this, GRUB switches to text mode before handing off to the kernel
+		# and Plymouth falls back to a hidden/text renderer, showing nothing.
+		grep -q 'GRUB_GFXPAYLOAD_LINUX' "${ROOTFS_DIR}/etc/default/grub" || \
+			echo 'GRUB_GFXPAYLOAD_LINUX=keep' >> "${ROOTFS_DIR}/etc/default/grub"
+
+		# Rebuild initramfs with live-boot modules
+		on_chroot << EOF
+update-initramfs -k all -u
+EOF
+
+		LIVE_SQUASHFS_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}-live.squashfs"
+
+		unmount "${ROOTFS_DIR}"
+
+		mksquashfs "${ROOTFS_DIR}" "${LIVE_SQUASHFS_FILE}" \
+			-comp xz \
+			-noappend \
+			-e boot/efi
+
+		# Locate updated kernel/initrd for liveboot
+		LIVE_VMLINUZ=$(find "${ROOTFS_DIR}/boot" -maxdepth 1 -name "vmlinuz-*" | sort | tail -1)
+		LIVE_INITRD=$(find "${ROOTFS_DIR}/boot" -maxdepth 1 -name "initrd.img-*" | sort | tail -1)
+
+		case "${DEPLOY_COMPRESSION}" in
+		zip)
+			pushd "${STAGE_WORK_DIR}" > /dev/null
+			LIVE_ZIP_MEMBERS="$(basename "${LIVE_SQUASHFS_FILE}")"
+			# shellcheck disable=SC2086
+			zip -"${COMPRESSION_LEVEL}" \
+				"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.zip" \
+				${LIVE_ZIP_MEMBERS}
+			popd > /dev/null
+			echo "Live archive created at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.zip"
+			;;
+		gz)
+			pigz --force -"${COMPRESSION_LEVEL}" "${LIVE_SQUASHFS_FILE}" --stdout > \
+				"${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs.gz"
+			echo "Live squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs.gz"
+			;;
+		xz)
+			xz --compress --force --threads 0 --memlimit-compress=50% -"${COMPRESSION_LEVEL}" \
+				--stdout "${LIVE_SQUASHFS_FILE}" > "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs.xz"
+			echo "Live squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs.xz"
+			;;
+		none | *)
+			cp "${LIVE_SQUASHFS_FILE}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs"
+			echo "Live squashfs exported at ${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.squashfs"
+			;;
+		esac
+
+		[ -n "${LIVE_VMLINUZ}" ] && cp "${LIVE_VMLINUZ}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.vmlinuz"
+		[ -n "${LIVE_INITRD}" ] && cp "${LIVE_INITRD}" "${DEPLOY_DIR}/${ARCHIVE_FILENAME}${IMG_SUFFIX}-live.initrd"
+	fi
+fi
+
+# Cleanup
+#rm -f "${SQUASHFS_FILE}"
+#[ -n "${VMLINUZ_FILE}" ] && rm -f "${VMLINUZ_FILE}"
+#[ -n "${INITRD_FILE}" ] && rm -f "${INITRD_FILE}"
+
+# cleanup stage work dir
+#rm -rf "${STAGE_WORK_DIR}"

exports/squashfs/prerun.sh

@@ -0,0 +1,6 @@
+#!/bin/bash -e
+
+rm -rf "${ROOTFS_DIR}"
+mkdir -p "${ROOTFS_DIR}"
+
+rsync -aHAXx --exclude /var/cache/apt/archives "${EXPORT_ROOTFS_DIR}/" "${ROOTFS_DIR}/"

scripts/common

@@ -134,4 +134,4 @@ ensure_loopdev_partitions() {
 	command -v udevadm >/dev/null 2>&1 || return 0
 	udevadm settle 10
 }
-export -f ensure_loopdev_partitions
+export -f ensure_loopdev_partitions

stage0/00-configure-apt/00-run.sh

@@ -3,16 +3,24 @@
 # Configure apt sources
 true > "${ROOTFS_DIR}/etc/apt/sources.list"
 
-if [[ "${ARCH}" == "arm64" || "${ARCH}" == "armhf" ]]; then
+# Add APT Sources
+if [ "${PLATFORM}" == "rpi" ]; then
+    # On rpi platforms add rpi sources
 	install -m 644 files/raspbian.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
 	install -m 644 files/raspi.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
 	sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/raspbian.sources"
 	sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/raspi.sources"
+	install -m 644 files/raspberrypi-archive-keyring.pgp "${ROOTFS_DIR}/usr/share/keyrings/"
 fi
 
-# Configure oxmc apt sources
+# Add default debian sources until oxmc creates a mirror for debian sources
-install -m 644 files/oxmc.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
+install -m 644 files/debian.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
-sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/oxmc.sources"
+sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/debian.sources"
+
+# Configure vesperos apt sources
+install -m 644 files/vesperos.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
+sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/vesperos.sources"
+install -m 644 files/vesperos.gpg "${ROOTFS_DIR}/usr/share/keyrings/"
 
 # Configure apt proxy
 if [ -n "$APT_PROXY" ]; then
@@ -22,6 +30,7 @@ else
 	rm -f "${ROOTFS_DIR}/etc/apt/apt.conf.d/51cache"
 fi
 
+# Add temp repo if provided
 if [ -n "$TEMP_REPO" ]; then
 	install -m 644 /dev/null "${ROOTFS_DIR}/etc/apt/sources.list.d/00-temp.list"
 	echo "$TEMP_REPO" | sed "s/RELEASE/$RELEASE/g" > "${ROOTFS_DIR}/etc/apt/sources.list.d/00-temp.list"
@@ -30,24 +39,30 @@ else
 fi
 
 # Configure apt preferences
-install -m 644 files/apt-chillcraftos-prefs "${ROOTFS_DIR}/etc/apt/preferences.d/"
+install -m 644 files/apt-vesperos-prefs "${ROOTFS_DIR}/etc/apt/preferences.d/"
+sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/preferences.d/apt-vesperos-prefs"
 
-if [[ "${ARCH}" == "arm64" || "${ARCH}" == "armhf" ]]; then
+# Add additional architectures if needed, update and upgrade and cache policy
-	# Add raspberrypi-archive-keyring to apt
-	install -m 644 files/raspberrypi-archive-keyring.pgp "${ROOTFS_DIR}/usr/share/keyrings/"
-fi
-
-# Add oxmc-archive-keyring to apt
-install -m 644 files/oxmc.pgp "${ROOTFS_DIR}/usr/share/keyrings/"
-
-# Add armhf and arm64 architectures, update and upgrade and cache policy
 on_chroot <<- \EOF
 	SYSTEM_ARCH="$(dpkg --print-architecture)"
-	if [ "$SYSTEM_ARCH" = "armhf" ]; then
+
-		dpkg --add-architecture arm64
+	# If we're building for rpi, we want to add both armhf and arm64 architectures to allow installing packages from both architectures
-	elif [ "$SYSTEM_ARCH" = "arm64" ]; then
+	if [ "${PLATFORM}" == "rpi" ]; then
-		dpkg --add-architecture armhf
+		if [ "$SYSTEM_ARCH" = "armhf" ]; then
+			dpkg --add-architecture arm64
+		elif [ "$SYSTEM_ARCH" = "arm64" ]; then
+			dpkg --add-architecture armhf
+		fi
 	fi
+
+	# If we're building for amd64, we want to add i386 architecture to allow installing packages from both architectures
+	if [ "$SYSTEM_ARCH" = "amd64" ]; then
+		dpkg --add-architecture i386
+	elif [ "$SYSTEM_ARCH" = "i386" ]; then
+		dpkg --add-architecture amd64
+	fi
+
+	# Update and upgrade packages and show cache policy
 	apt-get update
 	apt-get dist-upgrade -y
 	apt-cache policy

stage0/00-configure-apt/01-packages

@@ -1 +1 @@
-raspberrypi-archive-keyring
+tailscale-repo

stage0/00-configure-apt/01-packages-arm-only

@@ -0,0 +1 @@
+raspberrypi-archive-keyring

stage0/00-configure-apt/files/apt-chillcraftos-prefs

@@ -1,3 +0,0 @@
-Package: *
-Pin: release o=apt.oxmc.me, n=bookworm
-Pin-Priority: 1001

stage0/00-configure-apt/files/apt-vesperos-prefs

@@ -0,0 +1,3 @@
+Package: *
+Pin: release o=apt.oxmc.me, n=RELEASE
+Pin-Priority: 1001

stage0/00-configure-apt/files/debian.sources

@@ -0,0 +1,11 @@
+Types: deb
+URIs: https://deb.debian.org/debian
+Suites: RELEASE RELEASE-updates
+Components: main contrib non-free non-free-firmware
+Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg
+
+Types: deb
+URIs: https://security.debian.org/debian-security
+Suites: RELEASE-security
+Components: main contrib non-free non-free-firmware
+Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg

stage0/00-configure-apt/files/oxmc.sources

@@ -1,5 +0,0 @@
-Types: deb
-URIs: https://cdn.oxmc.me/apt
-Suites: RELEASE
-Components: main
-Signed-By: /usr/share/keyrings/oxmc.gpg

stage0/00-configure-apt/files/raspbian.sources

@@ -3,4 +3,6 @@ URIs: http://raspbian.raspberrypi.com/raspbian/
 Architectures: armhf
 Suites: RELEASE
 Components: main contrib non-free rpi
-Signed-By: /usr/share/keyrings/raspbian-archive-keyring.gpg
+Signed-By: /usr/share/keyrings/raspbian-archive-keyring.pgp
+# TODO: Remove Trusted once Raspbian reissues their key with SHA256+ (SHA1 rejected by sqv since 2026-02-01)
+Trusted: yes

stage0/00-configure-apt/files/vesperos.sources

@@ -0,0 +1,5 @@
+Types: deb
+URIs: https://apt.oxmc.me/vesperos
+Suites: RELEASE
+Components: main
+Signed-By: /usr/share/keyrings/vesperos.gpg

stage0/02-firmware/01-packages-amd64

@@ -1 +1 @@
-grub2
+linux-image-amd64

stage1/01-sys-tweaks/00-patches/01-bashrc.diff

@@ -30,4 +30,4 @@
 +    alias egrep='egrep --color=auto'
  fi
  
- # colored GCC warnings and errors
+ # colored GCC warnings and errors

stage1/01-sys-tweaks/00-run.sh

@@ -1,18 +1,15 @@
 #!/bin/bash -e
 
-install -v -m 644 files/fstab "${ROOTFS_DIR}/etc/fstab"
-# SteamOS like readonly root
 install -m 755 files/system-readonly "${ROOTFS_DIR}/sbin/"
 
-on_chroot << EOF
+if [ "${PLATFORM}" == "rpi" ]; then
-if ! id -u ${FIRST_USER_NAME} >/dev/null 2>&1; then
+	install -m 644 files/fstab-rpi "${ROOTFS_DIR}/etc/fstab"
-    #adduser --disabled-password --gecos "" ${FIRST_USER_NAME}
+else
-    if [ "${FIRST_USER_ISSYSTEM}" = "true" ]; then
+	install -m 644 files/fstab "${ROOTFS_DIR}/etc/fstab"
-        useradd -r -M -d / ${FIRST_USER_NAME}
-    else
-        adduser --disabled-password --gecos "" ${FIRST_USER_NAME}
-    fi
 fi
 
+# Create system user and set root password
+on_chroot << EOF
+useradd -r -M -d / system
 echo "root:root" | chpasswd
 EOF

stage1/01-sys-tweaks/files/fstab

@@ -1,3 +1,7 @@
-proc     /proc           proc    defaults          0       0
+proc            /proc           proc    defaults                                          0  0
-BOOTDEV  /boot/firmware  vfat    defaults          0       2
+BOOTDEV         /boot           vfat    defaults                                          0  2
-ROOTDEV  /               ext4    defaults,noatime  0       1
+EFIDEV          /boot/efi       vfat    defaults                                          0  2
+ROOTDEV         /               btrfs   defaults,noatime,compress=zstd,subvol=@           0  1
+ROOTDEV         /home           btrfs   defaults,noatime,compress=zstd,subvol=@home       0  2
+ROOTDEV         /var            btrfs   defaults,noatime,compress=zstd,subvol=@var        0  2
+ROOTDEV         /.snapshots     btrfs   defaults,noatime,compress=zstd,subvol=@snapshots  0  2

stage1/01-sys-tweaks/files/fstab-rpi

@@ -0,0 +1,6 @@
+proc            /proc           proc    defaults                                          0  0
+BOOTDEV         /boot/firmware  vfat    defaults                                          0  2
+ROOTDEV         /               btrfs   defaults,noatime,compress=zstd,subvol=@           0  1
+ROOTDEV         /home           btrfs   defaults,noatime,compress=zstd,subvol=@home       0  2
+ROOTDEV         /var            btrfs   defaults,noatime,compress=zstd,subvol=@var        0  2
+ROOTDEV         /.snapshots     btrfs   defaults,noatime,compress=zstd,subvol=@snapshots  0  2

stage1/01-sys-tweaks/files/system-readonly

@@ -1,30 +1,36 @@
 #!/bin/bash
 
-FSTAB_FILE="/etc/fstab"
+set -e
 
-if [ "$1" == "enable" ]; then
+SUBVOL="/"
-    echo "Enabling read-only mode..."
 
-    # Modify fstab to set root filesystem as read-only
+usage() {
-    sudo sed -i 's|\(PARTUUID=[^ ]* / .* ext4 \)defaults,noatime|\1ro,noatime|' "$FSTAB_FILE"
+    echo "Usage: system-readonly enable|disable|status"
-
-    # Remount root as read-only
-    sudo mount -o remount,ro /
-
-    echo "System is now read-only. Reboot for changes to persist."
-
-elif [ "$1" == "disable" ]; then
-    echo "Disabling read-only mode..."
-
-    # Modify fstab to set root filesystem as writable
-    sudo sed -i 's|\(PARTUUID=[^ ]* / .* ext4 \)ro,noatime|\1defaults,noatime|' "$FSTAB_FILE"
-
-    # Remount root as writable
-    sudo mount -o remount,rw /
-
-    echo "System is now writable. Reboot for changes to persist."
-
-else
-    echo "Usage: system-readonly enable|disable"
     exit 1
-fi
+}
+
+case "$1" in
+    enable)
+        echo "Enabling read-only mode..."
+        btrfs property set -ts "${SUBVOL}" ro true
+        mount -o remount,ro "${SUBVOL}"
+        echo "Root is read-only. Full effect on next reboot."
+        ;;
+    disable)
+        echo "Disabling read-only mode..."
+        btrfs property set -ts "${SUBVOL}" ro false
+        mount -o remount,rw "${SUBVOL}"
+        echo "Root is writable."
+        ;;
+    status)
+        RO=$(btrfs property get -ts "${SUBVOL}" ro 2>/dev/null | awk -F= '{print $2}')
+        if [ "${RO}" = "true" ]; then
+            echo "Read-only: enabled"
+        else
+            echo "Read-only: disabled"
+        fi
+        ;;
+    *)
+        usage
+        ;;
+esac

stage1/02-net-tweaks/01-run-arm-only.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-on_chroot << EOF
-	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_net_names 1
-EOF

stage1/02-net-tweaks/01-run-rpi-only.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -e
+
+on_chroot << EOF
+	raspi-config nonint do_net_names 1
+EOF

stage2/01-sys-tweaks/00-packages

@@ -1,21 +1,20 @@
-ssh less fbset sudo psmisc strace ed ncdu
+ssh fbset sudo psmisc strace ed ncdu zsh zsh-common
 console-setup keyboard-configuration debconf-utils parted
 build-essential manpages-dev bash-completion gdb pkg-config
+btrfs-progs
+snapper
 python-is-python3
 v4l-utils
-python3-spidev
-python3-smbus2
 avahi-daemon
 bluez bluez-firmware
 lua5.1
 luajit
-ca-certificates curl
+curl
 usbutils
 dosfstools
 apt-listchanges
 apt-file
 usb-modeswitch
-libpam-chksshpwd
 libmtp-runtime
 rsync
 htop
@@ -27,6 +26,6 @@ pciutils
 udisks2
 unzip zip p7zip-full
 file
-kms++-utils
 python3-venv
-cups
+cups
+command-not-found

stage2/01-sys-tweaks/00-packages-amd64

@@ -0,0 +1,2 @@
+qemu-guest-agent
+open-vm-tools

stage2/01-sys-tweaks/00-packages-nr

@@ -1,2 +1,4 @@
 cifs-utils
 mkvtoolnix
+hyfetch
+fastfetch

stage2/01-sys-tweaks/00-packages-rpi-only

@@ -0,0 +1,2 @@
+python3-spidev
+python3-smbus2

stage2/01-sys-tweaks/00-patches-amd64/02-inputrc.diff

@@ -0,0 +1,10 @@
+--- stage2.orig/rootfs/etc/inputrc
++++ stage2/rootfs/etc/inputrc
+@@ -59,3 +59,7 @@
+ # "\e[F": end-of-line
+
+ $endif
++
++# mappings for up and down arrows search history
++# "\e[B": history-search-forward
++# "\e[A": history-search-backward

stage2/01-sys-tweaks/00-patches-amd64/series

@@ -0,0 +1 @@
+02-inputrc.diff

stage2/01-sys-tweaks/00-patches-arm-only/01-resize-init.diff

@@ -1,5 +0,0 @@
---- stage2.orig/rootfs/boot/firmware/cmdline.txt
-+++ stage2/rootfs/boot/firmware/cmdline.txt
-@@ -1 +1 @@
--console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait
-+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait quiet init=/usr/lib/raspberrypi-sys-mods/firstboot

stage2/01-sys-tweaks/00-patches-arm-only/series

@@ -1 +0,0 @@
-01-resize-init.diff

stage2/01-sys-tweaks/00-patches-rpi-only/01-inputrc.diff

@@ -7,4 +7,4 @@
 +
 +# mappings for up and down arrows search history
 +# "\e[B": history-search-forward
-+# "\e[A": history-search-backward
++# "\e[A": history-search-backward

stage2/01-sys-tweaks/00-patches-rpi-only/series

@@ -0,0 +1 @@
+01-inputrc.diff

stage2/01-sys-tweaks/00-patches/01-run.sh

@@ -0,0 +1,4 @@
+#!/bin/bash -e
+
+# Set the default shell to zsh in the adduser configuration, so that new users created with adduser (including the live session user) will have zsh as their default shell.
+sed -i 's|^DSHELL=.*|DSHELL=/bin/zsh|' "${ROOTFS_DIR}/etc/adduser.conf"

stage2/01-sys-tweaks/00-patches/01-useradd.diff

@@ -5,7 +5,7 @@
  # useradd is a low level utility and should be as general
  # as possible
 -SHELL=/bin/sh
-+SHELL=/bin/bash
++SHELL=/bin/zsh
  #
  # The default group for users
  # 100=users on Debian systems
@@ -17,4 +17,4 @@
 +SKEL=/etc/skel
  #
  # Defines whether the mail spool should be created while
- # creating the account
+ # creating the account

stage2/01-sys-tweaks/00-patches/03-path.diff

@@ -5,7 +5,7 @@
  # (they are minimal, add the rest in the shell startup files)
  ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
 -ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-+ENV_PATH        PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
++ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
  
  #
  # Terminal permissions for terminals after login(1).
@@ -19,4 +19,3 @@
 +  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games"
  fi
  export PATH
- 

stage2/01-sys-tweaks/00-patches/series

@@ -1,3 +1,2 @@
 01-useradd.diff
-02-inputrc.diff
 03-path.diff

stage2/01-sys-tweaks/01-packages-rpi-only

@@ -8,4 +8,5 @@ python3-gpiozero
 python3-rpi-lgpio
 rpi-keyboard-config
 rpi-keyboard-fw-update
-rpi-usb-gadget
+rpi-usb-gadget
+kms++-utils

stage2/01-sys-tweaks/01-run.sh

@@ -1,12 +1,5 @@
 #!/bin/bash -e
 
-if [ -n "${PUBKEY_SSH_FIRST_USER}" ]; then
-	install -v -m 0700 -o 1000 -g 1000 -d "${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh
-	echo "${PUBKEY_SSH_FIRST_USER}" >"${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh/authorized_keys
-	chown 1000:1000 "${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh/authorized_keys
-	chmod 0600 "${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh/authorized_keys
-fi
-
 if [ "${PUBKEY_ONLY_SSH}" = "1" ]; then
 	sed -i -Ee 's/^#?[[:blank:]]*PubkeyAuthentication[[:blank:]]*no[[:blank:]]*$/PubkeyAuthentication yes/
 s/^#?[[:blank:]]*PasswordAuthentication[[:blank:]]*yes[[:blank:]]*$/PasswordAuthentication no/' "${ROOTFS_DIR}"/etc/ssh/sshd_config
@@ -27,26 +20,23 @@ if [ "${USE_QEMU}" = "1" ]; then
 fi
 
 on_chroot <<- EOF
-	systemctl enable rpi-resize
+    if [ "${PLATFORM}" == "rpi" ]; then
+		systemctl enable rpi-resize
+	fi
 
 	for GRP in input spi i2c gpio; do
 		groupadd -f -r "\$GRP"
 	done
-	for GRP in adm dialout cdrom audio users sudo video games plugdev input gpio spi i2c netdev render; do
-		adduser $FIRST_USER_NAME \$GRP
-	done
 EOF
 
-if [ -f "${ROOTFS_DIR}/etc/sudoers.d/010_pi-nopasswd" ]; then
-  sed -i "s/^pi /$FIRST_USER_NAME /" "${ROOTFS_DIR}/etc/sudoers.d/010_pi-nopasswd"
-fi
-
 on_chroot << EOF
 setupcon --force --save-only -v
 EOF
 
+# Set root password to locked
 on_chroot << EOF
 usermod --pass='*' root
+#usermod --shell /bin/zsh root
 EOF
 
 rm -f "${ROOTFS_DIR}/etc/ssh/"ssh_host_*_key*

stage2/01-sys-tweaks/02-run.sh

@@ -0,0 +1,17 @@
+#!/bin/bash -e
+
+# Install snapper config for root subvolume
+mkdir -p "${ROOTFS_DIR}/etc/snapper/configs"
+install -m 644 files/snapper-root.conf "${ROOTFS_DIR}/etc/snapper/configs/root"
+
+# Register root config with snapper
+echo 'SNAPPER_CONFIGS="root"' > "${ROOTFS_DIR}/etc/default/snapper"
+
+# Install apt pre/post snapshot hook
+install -m 644 files/apt-snapper-hook "${ROOTFS_DIR}/etc/apt/apt.conf.d/80-snapper"
+
+# Enable snapper timeline timer
+on_chroot << EOF
+systemctl enable snapper-timeline.timer
+systemctl enable snapper-cleanup.timer
+EOF

stage2/01-sys-tweaks/files/apt-snapper-hook

@@ -0,0 +1,2 @@
+DPkg::Pre-Invoke  { "if [ -x /usr/bin/snapper ] && snapper -c root list >/dev/null 2>&1; then snapper -c root create --type pre --cleanup-algorithm number --print-number --description 'apt'; fi"; };
+DPkg::Post-Invoke { "if [ -x /usr/bin/snapper ] && snapper -c root list >/dev/null 2>&1; then snapper -c root create --type post --cleanup-algorithm number --print-number --description 'apt'; fi"; };

stage2/01-sys-tweaks/files/snapper-root.conf

@@ -0,0 +1,25 @@
+SUBVOLUME="/"
+FSTYPE="btrfs"
+
+# Snapshot type
+ALLOW_GROUPS="wheel sudo"
+SYNC_ACL="yes"
+
+# Timeline snapshots (automatic periodic)
+TIMELINE_CREATE="yes"
+TIMELINE_CLEANUP="yes"
+TIMELINE_MIN_AGE="1800"
+TIMELINE_LIMIT_HOURLY="5"
+TIMELINE_LIMIT_DAILY="7"
+TIMELINE_LIMIT_WEEKLY="0"
+TIMELINE_LIMIT_MONTHLY="0"
+TIMELINE_LIMIT_YEARLY="0"
+
+# Number snapshots cleanup
+NUMBER_CLEANUP="yes"
+NUMBER_MIN_AGE="1800"
+NUMBER_LIMIT="50"
+NUMBER_LIMIT_IMPORTANT="10"
+
+# Exclude /var and /home from root snapshots (they have their own subvolumes)
+BACKGROUND_COMPARISON="yes"

stage2/02-net-tweaks/00-packages

@@ -1,3 +1,3 @@
-wpasupplicant wireless-tools firmware-atheros firmware-brcm80211 firmware-libertas firmware-realtek firmware-mediatek firmware-marvell-prestera-
+wpasupplicant wireless-tools firmware-atheros firmware-brcm80211 firmware-libertas firmware-iwlwifi firmware-realtek firmware-mediatek firmware-marvell-prestera-
 network-manager
 net-tools

stage2/02-net-tweaks/01-run-rpi-only.sh

@@ -13,7 +13,7 @@ done
 
 if [ -v WPA_COUNTRY ]; then
 	on_chroot <<- EOF
-		SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_wifi_country "${WPA_COUNTRY}"
+		raspi-config nonint do_wifi_country "${WPA_COUNTRY}"
 	EOF
 elif [ -d "${ROOTFS_DIR}/var/lib/NetworkManager" ]; then
 	# NetworkManager unblocks all WLAN devices by default. Prevent that:

stage2/04-cloud-init/01-run-amd64.sh

@@ -0,0 +1,13 @@
+#!/bin/bash -e
+
+if [ "${ENABLE_CLOUD_INIT}" != "1" ]; then
+	log "Skipping cloud-init stage"
+	exit 0
+fi
+
+SEED_DIR="${ROOTFS_DIR}/var/lib/cloud/seed/nocloud"
+mkdir -p "${SEED_DIR}"
+
+install -v -m 644 files/meta-data-amd64 "${SEED_DIR}/meta-data"
+install -v -m 644 files/user-data "${SEED_DIR}/user-data"
+install -v -m 644 files/network-config "${SEED_DIR}/network-config"

stage2/04-cloud-init/README.rpi.txt

@@ -0,0 +1,15 @@
+Cloud-Init support for Raspberry Pi (ARM)
+
+Reference for Raspberry Pi custom cloud-init config module: https://cloudinit.readthedocs.io/en/latest/reference/modules.html#raspberry-pi-configuration
+
+Config files are installed to /boot/firmware/ so they are accessible from the
+boot partition before the root filesystem is fully mounted.
+
+- files/network-config  Network configuration template (netplan format)
+
+- files/user-data       Example user-data configuration
+
+- files/meta-data       Cloud-init instance config (instance_id: rpios-image)
+
+The rpi-cloud-init-mods package (from 00-packages-arm-only) provides additional
+Raspberry Pi specific cloud-init modules.

stage2/04-cloud-init/README.txt

@@ -1,9 +1,15 @@
-Cloud-Init support for Raspberry Pi OS
+Cloud-Init support for amd64 (PC/Desktop)
 
-Reference for Raspberry Pi custom cloud-init config module: https://cloudinit.readthedocs.io/en/latest/reference/modules.html#raspberry-pi-configuration
+Reference: https://cloudinit.readthedocs.io/
 
-- files/network-config is required because otherwise imager would fail to create the correct filesystem entry
+Config files are installed to /var/lib/cloud/seed/nocloud/ which is the
+standard NoCloud datasource seed directory for non-RPi systems.
 
-- files/user-data same reason and to include some example configurations
+- files/network-config      Network configuration template (netplan format)
 
-- files/meta-data Cloud-init instance configuration
+- files/user-data           Example user-data configuration
+
+- files/meta-data-amd64     Cloud-init instance config (instance_id: vesperos-image)
+
+The NoCloud datasource is used so cloud-init picks up config from the local
+seed directory on first boot without requiring a network metadata service.

stage2/04-cloud-init/files/meta-data

@@ -15,4 +15,4 @@ dsmode: local
 # Warning: changing this will cause cloud-init to assume it is running on a
 # "new" instance, and to go through first time setup again (the value is
 # compared to a cached copy).
-instance_id: rpios-image
+instance_id: vesperos-rpi-image