oxmc
cd30b06245
- mkbootimg.mk: boot.img uses the normal ramdisk again; the recovery.img rule is guarded so it only builds when recovery is enabled (PAWLET_BUILD_RECOVERY=1) and carries the recovery ramdisk. - config.txt [tryboot] back to boot_partition=2 (A/B trial); recovery enters via reboot,3. - vendor.prop reboot reason back to reboot,tryboot. - drop the no-op reserved-size lines (AOSP ignores RESERVED_SIZE for fixed non-dynamic partitions).
119 lines
4.9 KiB
Makefile
119 lines
4.9 KiB
Makefile
#
|
|
# Copyright (C) 2021-2022 KonstaKANG
|
|
# Copyright (C) 2025 oxmc
|
|
#
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
#
|
|
|
|
DEVICE_PATH := device/pawlet/rpi5
|
|
|
|
# PawletOS common board config (A/B, partition sizes, update_engine)
|
|
include vendor/pawlet/config/BoardConfigPawlet.mk
|
|
|
|
# Architecture
|
|
TARGET_ARCH := arm64
|
|
TARGET_ARCH_VARIANT := armv8-a
|
|
TARGET_CPU_ABI := arm64-v8a
|
|
TARGET_CPU_ABI2 :=
|
|
TARGET_CPU_VARIANT := cortex-a76
|
|
|
|
# Bluetooth
|
|
BOARD_HAVE_BLUETOOTH := true
|
|
|
|
# Bootloader
|
|
TARGET_NO_BOOTLOADER := true
|
|
|
|
# Recovery — stock bootable/recovery stays unforked; TWRP's GUI plugs in via
|
|
# TARGET_RECOVERY_UI_LIB (recovery_main.cpp dlopen()s librecovery_ui_ext.so and
|
|
# dlsym()s make_device() from whatever this points at). See
|
|
# vendor/pawlet/recovery_ui/README.md and NOTES-ota-recovery-ab.md.
|
|
TARGET_NO_RECOVERY := false
|
|
# Recovery is a SEPARATE image on the recovery partition, built on demand (see
|
|
# PRODUCT_BUILD_RECOVERY_IMAGE in common.mk / the `precovery` helper). It is kept
|
|
# out of the normal build so AOSP does not force recovery.img into the vendor
|
|
# image size check (RECOVERY_FROM_BOOT_PATCH), which would overflow the padded
|
|
# 2GB vendor partition. mkbootimg.mk builds the recovery FAT when enabled;
|
|
# pawlet-recoveryboot.sh enters it via reboot,3. BOARD_USES_FULL_RECOVERY_IMAGE
|
|
# avoids the recovery-from-boot imgdiff / recovery-resource.dat path. Do NOT use
|
|
# BOARD_USES_RECOVERY_AS_BOOT: it makes AOSP seize the boot.img rule and collide
|
|
# with our custom FAT mkbootimg.mk.
|
|
BOARD_USES_FULL_RECOVERY_IMAGE := true
|
|
# BOARD_RECOVERYIMAGE_PARTITION_SIZE (128M) comes from BoardConfigPawlet.mk.
|
|
TARGET_RECOVERY_FSTAB := device/pawlet/rpi5/recovery/recovery.rpi5.fstab
|
|
TARGET_RECOVERY_PIXEL_FORMAT := RGB_565
|
|
# Phase 2 — TWRP GUI: re-point once librecovery_ui_pawlet_twrp links
|
|
# (libaosprecovery / TWRP's forked install/*.cpp still unported, see
|
|
# vendor/pawlet/recovery_ui/README.md).
|
|
#TARGET_RECOVERY_UI_LIB := librecovery_ui_pawlet_twrp
|
|
|
|
# Display
|
|
TARGET_SCREEN_DENSITY := 240
|
|
|
|
# AVB — no vbmeta partition in layout
|
|
BOARD_AVB_ENABLE := false
|
|
|
|
# Kernel
|
|
BOARD_CUSTOM_BOOTIMG := true
|
|
BOARD_CUSTOM_BOOTIMG_MK := $(DEVICE_PATH)/mkbootimg.mk
|
|
BOARD_KERNEL_CMDLINE := console=ttyAMA10,115200 androidboot.hardware=rpi5
|
|
|
|
# Boot devices — see pawlet_rpi4/BoardConfig.mk for the rationale. First-stage
|
|
# init only creates /dev/block/by-name/* symlinks for partitions on a declared
|
|
# boot device (exact match vs uevent path minus /devices/platform/).
|
|
# RPi5 differs from RPi4: USB is on the RP1 chip behind the internal PCIe, and
|
|
# RP1's xHCI is itself a platform device, so init matches at the .usb node:
|
|
# NVMe (external PCIe HAT): axi/1000110000.pcie
|
|
# USB (RP1 xHCI on PCIe): axi/1000120000.pcie/1f00200000.usb (and .../1f00300000.usb)
|
|
# Extra entries are harmless (exact-match set). Verify/trim against an RPi5
|
|
# serial boot log (the sda / nvme0n1 /devices/platform/... path).
|
|
BOARD_KERNEL_CMDLINE += androidboot.boot_devices=axi/1000110000.pcie,axi/1000120000.pcie/1f00200000.usb,axi/1000120000.pcie/1f00300000.usb,axi/1000120000.pcie
|
|
|
|
# Manifest
|
|
DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := $(DEVICE_PATH)/framework_compatibility_matrix.xml
|
|
DEVICE_MANIFEST_FILE := $(DEVICE_PATH)/manifest.xml
|
|
PRODUCT_MANIFEST_FILES := $(DEVICE_PATH)/product_manifest.xml
|
|
|
|
# Partition sizes
|
|
BOARD_FLASH_BLOCK_SIZE := 4096
|
|
BOARD_BOOTIMAGE_PARTITION_SIZE := 134217728 # 128M
|
|
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 8589934592 # 8192M (8GB)
|
|
BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE := 4294967296 # 4096M (4GB)
|
|
BOARD_SYSTEM_EXTIMAGE_PARTITION_RESERVED_SIZE := 104857600 # 100MB
|
|
BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
|
|
TARGET_COPY_OUT_SYSTEM_EXT := system_ext
|
|
BOARD_VENDORIMAGE_PARTITION_SIZE := 2147483648 # 2048M (2GB)
|
|
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
|
|
TARGET_COPY_OUT_VENDOR := vendor
|
|
BOARD_USES_METADATA_PARTITION := true
|
|
BOARD_METADATAIMAGE_PARTITION_SIZE := 67108864 # 64MB (increased for A/B snapshot metadata)
|
|
BOARD_MISCIMAGE_PARTITION_SIZE := 4194304 # 4MB (A/B slot tracking)
|
|
BOARD_USERDATAIMAGE_PARTITION_SIZE := 134217728 # 128M
|
|
TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
|
|
TARGET_USERIMAGES_USE_EXT4 := true
|
|
|
|
# if BOARD_STORAGE_SUPPORTS_DISCARD := true
|
|
# is set in BoardConfig.mk (or a device variant makefile), TRIM will be
|
|
# enabled on the metadata partition. Only do this if your storage device
|
|
# actually supports discard (SD cards, SSDs) — USB flash drives typically
|
|
# don't, and requesting discard on them stalls jbd2.
|
|
BOARD_STORAGE_SUPPORTS_DISCARD := true
|
|
|
|
# Platform
|
|
TARGET_BOARD_PLATFORM := bcm2712
|
|
TARGET_BOOTLOADER_BOARD_NAME := bcm2712
|
|
|
|
# Properties
|
|
TARGET_VENDOR_PROP += $(DEVICE_PATH)/vendor.prop
|
|
|
|
# SELinux
|
|
BOARD_SEPOLICY_DIRS += device/pawlet/rpi5/sepolicy
|
|
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
|
|
|
|
# Wifi
|
|
BOARD_WLAN_DEVICE := bcmdhd
|
|
BOARD_HOSTAPD_DRIVER := NL80211
|
|
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
|
|
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
|
|
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
|
|
WPA_SUPPLICANT_VERSION := VER_0_8_X
|