Call the IPA start()/stop() functions before/after the camera is
started. This makes sure the IPA functions properly once thread
management is moved into the start/stop interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When the camera is stopping the helper that keeps track of which buffers
are associated with a request is not cleared. Add a clear operation and
call it when the camera is stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the IPA has not filled in the parameters buffer still queue it to
hardware. Not queuing the buffer results in the pipeline and hardware
going out of sync.
This is not a permanent fix of the problem and a todo is added to fix it
properly. This change does not make the situation worse as the state of
the pipeline is just as unknown as if no param buffer is queued as if one
with old content in it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add two new operations to the IPA interface to start and stop it. The
intention is that these functions shall be used by the IPA to perform
actions when the camera is started and stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
DRM fourccs look like they have a per-plane modifier, but in fact each
of them should be same. Hence instead of passing a set of modifiers for
each fourcc in PixelFormat class, we can pass just a single modifier.
So, replace the set with a single value.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Fix compilation error in src/libcamera/pipeline/ipu3/ipu3.cpp]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Commit 5e7c5d64a6 ("libcamera: ipu3: Do not unconditionally queue
buffers to CIO2") introduced usage of the std::queue default constructor
by using copy-list-initialization from {}. The default constructor was
explicit in C++11, which was fixed retroactively with a defect report
(http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0935r0.html).
gcc 5 and 6 are unfortunately affected, requiring explicit usage of the
constructor.
Fixes: 5e7c5d64a6 ("libcamera: ipu3: Do not unconditionally queue buffers to CIO2")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Allow the RAW buffer cycling between CIO2 and IMGU to be memory copied
to a new FrameBuffer in a new RAW stream. This allows users to capture
the raw Bayer format coming from the sensor.
As the RAW frame is memory copied queueing requests with the
StillCaptureRaw stream might impact performance.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of unconditionally cycling buffers between the CIO2 and IMGU
pick a buffer when a request is queued to the pipeline. This is needed
if operations are to be applied to the buffer coming from CIO2 with
parameters coming from a Request.
The approach to pick a CIO2 buffer when a request is queued is similar
to other pipelines, where parameters and statistic buffers are picked
this way.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the ability to set the Request a buffer is associated with. This is
needed for buffers that live inside a pipeline handler and is
temporarily associated with a request as it's being processed inside the
pipeline.
While we are at it delete a stray semicolon.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This method may be used to memory copy a whole FrameBuffer content
from another buffer. The operation is not fast and should not be used
without great care by pipelines.
The intended use-case is to have an option to copy out RAW buffers from
the middle of a pipeline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a 'pipelines' project option that specifies which pipeline handlers
to compile in. The corresponding IPA modules are automatically selected.
The default is to compile all pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Give a subdirectory to all pipeline handlers to make the structure of
the source tree more consistent. This will also simplify the
implementation of pipeline handlers selection at build time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
The V4L2VideoDevice class implements conversion between PixelFormat and
V4L2PixelFormat for a single flavour of the 32-bit ARGB formats. Add the
three missing ones.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Extend the ControlValue class with a reserve() function to set the value
without actually copying data, and a non-const data() function that
allows writing data directly to the ControlValue storage. This allows
allocating memory directly in ControlValue, potentially removing a data
copy.
Note that this change was implemented before ByteStreamBuffer gained the
zero-copy read() variant, and doesn't actually save a copy in the
control serializer. It however still simplifies
ControlSerializer::loadControlValue().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Replace usage of shared_ptr with unique_ptr to convey media device
ownership internally in the enumerators when creating the media device.
Once a media device has all its dependencies met, it is converted to a
shared_ptr to keep the external API unchanged.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Commit 68daa9302f ("libcamera: device_enumerator: Don't stop if one
device fails") introduced a bug in device enumeration. Previously, a
media device would only be added when all its dependencies were present,
as indicated by populateMediaDevice() returning 0. The commit changed
the logic to propagate the populateMediaDevice() return code up, but
mistakenly added the media device to the enumerator even when
dependencies were missing. This causes media devices enumerated with
missing dependencies to be added twice, once when enumerating the media
device itself, and a second time when all the dependencies are found.
Fix it by deferring addition of the media device when dependencies are
missing, and add debug messages to track this process.
Fixes: 68daa9302f ("libcamera: device_enumerator: Don't stop if one device fails")
Reported-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The ControlValue class size should be minimized to save space, as it can
be instantiated in large numbers. The current implementation does so by
specifying several members as bitfields, but does so too aggressively,
resulting in fields being packed in an inefficient to access way on some
platforms. For instance, on 32-bit x86, the numElements_ field is offset
by 7 bits in a 32-bit word. This additionally causes a static assert
that checks the size of the class to fail.
Relax the constraints on the isArray_ and numElements_ fields to avoid
inefficient access, and to ensure that the class size is identical
across all platforms. This will need to be revisited anyway when
stabilizing the ABI, so add a \todo comment as a reminder.
Fixes: 1fa4b43402 ("libcamera: controls: Support array controls in ControlValue")
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The size of the ControlValue class is checked by a static_assert() to
avoid accidental ABI breakages. There's no need to perform the check
every time controls.h is included, move it to controls.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
String controls are stored internally as an array of char, but the
ControlValue constructor, get() and set() functions operate on an
std::string for convenience. Array of strings are thus not supported.
Unlike for other control types, the ControlInfo range reports the
minimum and maximum allowed lengths of the string (the minimum will
usually be 0), not the minimum and maximum value of each element.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
To prepare for storage of additional information in the ControlRange
structure, rename it to ControlInfo.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
To prepare for the rename of ControlRange to ControlInfo, rename all the
ControlInfoMap instance variables currently named info to infoMap. This
will help avoiding namespace clashes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
On failure, the return code from V4L2Device::ioctl() is the negative error
code set by the failed ::ioctl() system call. When the return code of
V4L2Device::ioctl() is provided to strerror() it has to be negated again
to obtain the positive error code. Fix a few wrong usages of the return
code which provided to the strerror() function a negative error code.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
When folding buffer management with start/stop the wrong variable was
passed to importBuffers() resulting in only one buffer being imported
for the video node making capture impossible. Fix this by first renaming
the confusingly named variable 'count' to 'ipaBufferId'. And then
reusing the 'count' name for the buffer count.
While at it remove the loop to find the maximum value of buffers from
the single stream used by the pipeline. Once we add more stream this
needs to be reworked anyhow so keep it simple for now.
Fixes: 33fedea818 ("libcamera: pipeline_handler: Fold buffer management with start/stop")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The two callers of functions libcameraPath() and isLibcameraInstalled()
end up using the same process and finally use the path with
libcamera.so. Hence write a function libcameraBuildPath() which
combines their functions and returns the root of the build sources
when the library has not been installed, but is running from the build
tree, thereby making call sites simpler.
When the library is installed, libcameraBuildPath() will return an empty
string.
Make changes in the call sites accordingly.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To achieve the goal of preventing unwanted conversion between a DRM and
a V4L2 FourCC, make the V4L2PixelFormat constructor that takes an
integer value explicit. All users of V4L2 pixel formats flagged by the
compiler are fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The V4L2PixelFormat class describes the pixel format of a V4L2 buffer.
It wraps the V4L2 numerical FourCC, and shall be used in all APIs that
deal with V4L2 pixel formats. Its purpose is to prevent unintentional
confusion of V4L2 and DRM FourCCs in code by catching implicit
conversion attempts at compile time.
The constructor taking a V4L2 FourCC integer value will be made explicit
in a further commit to minimize the size of this change and keep it
reviewable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The SizeRange constructors take minimum and maximum width and height
values as separate arguments. We have a Size class to convey size
information, use it in the constructors, and update the callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The Camera class currently requires the allocator to have no allocated
buffer before the camera is reconfigured, and the allocator to be
destroyed before the camera is released. There's no basis for these
restrictions anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
There's no need anymore to have the Camera object control how and when
pipeline handlers allocate and free the buffers for the
application-facing video devices. Fold those operations, currently
performed by importFrameBuffers() and freeFrameBuffers(), into the
start() and stop() functions. This simplifies the pipeline handler API,
its implementation, and the implementation of the Camera class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Use the V4L2 buffer orphaning feature, exposed through
V4L2VideoDevice::exportBuffers(), to decouple buffer import and export.
The PipelineHandler::importFrameBuffers() function is now called for all
streams regardless of whether exportFrameBuffers() has been called or
not. This simplifies the Camera implementation slightly, and opens the
door to additional simplifications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
The PipelineHandler::importFrameBuffer() function, called by
Camera::start() may return an error, but its return value is ignored.
Propagate it to the caller to fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Add a new exportBuffers() function that only performs buffer allocation
and export, but leaves the V4L2 buffer queue unallocated on return. This
function will be used to simplify buffer allocation for pipeline
handlers. This is made possible by the V4L2 buffer orphaning feature
introduced in Linux v5.0, so add a version check to catch and report
issues early.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Move the buffer creation code out of allocateBuffers() to a
createBuffers() function. This prepare for the rework of buffer export
and will avoid code duplication.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
To prepare for the rework of buffer export, pass the memory type
explicitly to the V4L2VideoDevice::reqbufs() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
To prepare for the rework of buffer allocation that will differentiate
export and allocation, rename exportBuffers() to allocateBuffers().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Niklas Söderlund
Kaaira Gupta
Laurent Pinchart
Jacopo Mondi
Helen Koike