Most pipeline handler methods are dispatched in the internal `CameraManager`
thread. `PipelineHandler::generateConfiguration()` is called directly,
however, which likely goes against the expectations, so call it on the
internal thread.
Before 14618cdd0c ("libcamera: base: bound_method: Move return value")
this could not be done because the function returns `std::unique_ptr`, and
that type cannot be copied.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=273
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In Camera::queueRequest() the control list is updated transparently by
converting AeEnable into ExposureTimeMode and AnalogueGainMode
controls.
However, this was not happening during Camera::start(), meaning that
setting AeEnable there was having no effect. It should behave the same
here too.
Fixes: 7abd413905 ("libcamera: camera: Pre-process AeEnable control")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The waiting requests of one camera should not be able to influence
queuing to another camera. Currently a request that is in the
waitingQueue and waiting for preparation blocks all requests of other
cameras even if they are already prepared. To fix that replace the
single waitingRequests_ queue with one queue per camera.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Umang Jain <uajain@igalia.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
`Camera::Private::properties_` is a default constructed `ControlList`,
therefore it does not have an associated `ControlIdMap`. `controlInfo_`
is in a similar situation.
Extend the `Camera::Private` constructor to initialize the control id map
of both properly.
Multiple pipeline handlers copy the sensor's property list and
set that as camera properties, and since the `CameraSensor{Legacy,Raw}`
classes set the proper id map, the camera properties will have it too.
However, some pipelines, e.g. `uvcvideo` or `virtual`, do not do so,
and thus there will be no id map set. To fix this, extend the
`Camera::Private` constructor to set `properties::properties`.
As for `controlInfo_`, all pipeline handlers overwrite it during
camera initialization (and thus it will have the correct id map),
but still initialize the id map so that it is set at all times.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Handle the AeEnable under the hood in the Camera class, such that
AeEnable activates ExposureTimeMode and AnalogueGain together. This
allows applications the convenience of setting auto/manual mode of all
of the AE-related controls, as well as protecting applications against a
nasty behavior change if an aperture control is added in the future.
This also moves common handling code out of the IPA.
While we also want to inject AeEnable in Camera::controls() so that IPAs
don't have to report it, it is technically difficult at the moment as
ControlInfoMaps are not easily modifiable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
A copy is made in the range-based for loop, and thus all modifications
done in the for loop body are lost, and not actually applied to
the object in the container.
Fix that by taking a reference in the range-based for loop.
Fixes: 4217c9f1aa ("libcamera: camera: Zero streams before validate()")
Fixes: 613d540267 ("pipeline: raspberrypi: Fix handling of colour spaces")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The uvcvideo driver needs to open / close its /dev/video# node from
pipe_->acquireDevices() / pipe_->releaseDevices().
V4L2VideoDevice::open() creates an EventNotifier and this notifier needs
to be created from the CameraManager thread.
Use invokeMethod() for pipe_->acquire() and pipe_->release() so that the
EventNotifiers are created from the CameraManager thread context.
Running pipe_->acquire() and pipe_->release() from the CameraManager
thread context serializes all calls to them. Drop PipelineHandler::lock_
this now is no longer necessary and update the "\context" part of the
documentation for acquire[Device]() and release[Device]() to match.
Note the delayed opening of /dev/video# is a special case because the
kernel uvcvideo driver powers on the USB device as soon as /dev/video#
is opened. This behavior should *not* be copied by other pipeline
handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
libcamera always keeps all /dev/video# and /dev/v4l2_subdev# nodes for a
pipeline open after enumerating the camera.
This is a problem for the uvcvideo pipeline handler. Keeping /dev/video#
open stops the UVC USB device from being able to enter runtime-suspend
causing significant unnecessary power-usage.
Add a stub acquireDevice() function to the PipelineHandler class which
pipeline handlers can override.
The uvcvideo pipeline handler will use this to delay opening /dev/video#
until the device is acquired. This is a special case because the kernel
uvcvideo driver powers on the USB device as soon as /dev/video# is
opened. This behavior should *not* be copied by other pipeline handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The *::Private classes are part of the internal API, as their name
implies. They are defined in internal headers, but implemented in the
same source file as their public counterparts. This will cause Doxygen
to complain about missing class definition when splitting the public and
internal API documents, as the internal headers won't be parsed by
Doxygen for the public API documentation.
Marking the classes with \internal isn't enough. The directive prevents
the documentation block from being included in the output, but this
occurs at the generation stage, after the documentation blocks are
parsed. Fix this by completely hidding the implementation of the
*::Private classes from Doxygen using preprocessor conditional
compilation. To do so, introduce a new macro, __DOXYGEN_PUBLIC__, that
will be defined for the public API documentation only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The libcamera public API exposes classes that have parts considered
internal. They inherit the Extensible class, and their internal parts
are split into a Private class. Those classes are defined in public API
headers, and their Private counterparts are defined in internal headers
sharing a common file name (in a different directory). Both headers are
documented in the same source file.
For instance, include/libcamera/camera.h contains the public API of the
Camera class, and include/libcamera/internal/camera.h its internal
counterpart. Both are documented in src/libcamera/camera.cpp.
As the internal headers are not part of the public API, they need to be
hidden from the future public API builds. To prepare for doing so, mark
them with the \internal Doxygen directive. Hardcode the Doxygen
INTERNAL_DOCS option to YES to include the internal API. This will be
changed later for the public API documentation build.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
When compiling with gcc 8.4.0, the compiler was reported to throw an
unused variable warning:
../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’:
../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable]
for (auto [i, cfg] : utils::enumerate(config_)) {
^
The build environment may have been incorrect as the problem couldn't be
reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is
indeed unused. It turns out that the code can be simplified, as the
commit that removed usage of the variable kept the now unneeded
utils::enumerate() call.
Simplify the code and fix the warning in one go.
Fixes: 13986d6ce3 ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Replace the usage of CameraConfiguration::transform with the newly
introduced CameraConfiguration::orientation.
Rework and rename the CameraSensor::validateTransform(transform) to
CameraSensor::computeTransform(orientation), that given the desired
image orientation computes the Transform that pipeline handlers should
apply to the sensor to obtain it.
Port all pipeline handlers to use the newly introduced function.
This commit breaks existing applications as it removes the public
CameraConfiguration::transform in favour of
CameraConfiguration::orientation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Introduce the Orientation enumeration which describes the possible 2D
transformations that can be applied to an image using two basic plane
transformations.
Add to the CameraConfiguration class a new member 'orientation' which is
used to specify the image orientation in the memory buffers delivered to
applications.
The enumeration values follow the ones defined by the EXIF specification at
revision 2.32, Tag 274 'orientation'.
The newly introduced field is meant to replace
CameraConfiguration::transform which is not removed yet not to break
compilation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Change the parameter type of `generateConfiguration()` from `const std::vector&`
to `libcamera::Span`. A span is almost always preferable to a const vector ref
because it does not force dynamic allocation when none are needed, and it allows
any contiguous container to be used.
A new overload is added that accepts an initializer list so that
cam->generateConfiguration({ ... })
keeps working.
There is no API break since a span can be constructed from a vector
and the initializer list overload takes care of the initializer lists,
but this change causes an ABI break.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Apply checkstyle fixups]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
As the CameraSensor::validateTransform() function compensate
for the sensor's mounting rotation, the properties::Rotation value
should be adjusted to make sure application that receive already
"corrected" images do not get confused by Rotation still reporting
a value.
Howerver, as an image sensor can only compensate rotations by applying
H/V flips, only correct Rotation when the mounting rotation is 180
degrees.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Invalid, or not correctly reset requests can cause undefined behaviour
in the pipeline handlers due to unexpected request state.
If the status has not been reset to Request::RequestPending, it is
either not new, or has not been correctly procesed through
Request::reuse().
This can be caught early by validating the status of the request when it
is queued to a camera.
Reject invalid requests before processing them in the pipeline handlers.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The intention is that the "main" colour space is the colour space of
the largest non-raw stream. Unfortunately the use of "config_[i].size"
is clearly incorrect, and has been copied from prior versions of the
code. This patch corrects the error.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
The PipelineHandler::generateConfiguration() function allocates a
CameraConfiguration instance and returns it. The ownership of the
instance is transferred to the caller. This is a perfect match for a
std::unique_ptr<>, which the Camera::generateConfiguration() function
already returns. Update PipelineHandler::generateConfiguration() to
match it. This fixes a memory leak in one of the error return paths in
the IPU3 pipeline handler.
While at it, update the Camera::generateConfiguration() function
documentation to drop the sentence that describes the ownership
transfer, as that is implied by usage of std::unique_ptr<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The CameraConfiguration::validateColorSpaces() function performs color
space validation on a camera configuration, by validating the color
space of each stream individually, and optionally ensuring that all
streams share the same color space. The individual validation is very
basic, limited to ensuring that raw formats use a raw color space.
Color spaces are more constrained than that:
- The Y'CbCr encoding and quantization range for RGB formats must be
YcbcrEncoding::None and Range::Full respectively.
- The Y'CbCr encoding for YUV formats must not be YcbcrEncoding::None.
Instead of open-coding these constraints in the validateColorSpaces()
function, create a new ColorSpace::adjust() function to centralize color
space validation and adjustment, and use it in validateColorSpaces().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
libcamera implements a pipeline handler locking mechanism based on
advisory locks on media devices, to prevent concurrent access to cameras
from the same pipeline handler from different processes (this only works
between multiple libcamera instances, as other processes won't use
advisory locks on media devices).
A side effect of the implementation prevents multiple cameras created by
the same pipeline handler from being used concurrently. Fix this by
turning the PipelineHandler lock() and unlock() functions into acquire()
and release(), with a use count to replace the boolean lock flag. The
Camera class is updated accordingly.
As a consequence of this change, the IPU3 pipeline handler will fail to
operate properly when the cameras it exposes are operated concurrently.
The android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview
test fails as a result. This should be fixed in the IPU3 pipeline
handler to implement mutual exclusion between cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
We now have V4L2VideoDevice ensuring that sensor sequence numbers
start from zero [1], and we desire that these should match the Request
sequence number as well.
[1] 1c9dc0fd89 ("libcamera: v4l2_videodevice: Identify non-zero stream starts")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Provide a call allowing requests to be registered and associated with
the pipeline handler after being constructed by the camera.
This provides an opportunity for the PipelineHandler to connect any
signals it may be interested in receiving for the request such as
getting notifications when the request is ready for processing when
using a fence.
While here, update the existing usage of the d pointer in
Camera::createRequest() to match the style of other functions.
Bug: https://github.com/raspberrypi/libcamera-apps/issues/217
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This function forces raw streams to have the "raw" color space, and
also optionally makes all non-raw output streams to share the same
color space as some platforms may require this.
When sharing color spaces we take the shared value to be the one from
the largest of these streams. This choice is ultimately arbitrary, but
can be appropriate if smaller output streams are used for image
analysis rather than human consumption, when the precise colours may
be less important.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Many signals used in internal and public APIs carry the emitter pointer
as a signal argument. This was done to allow slots connected to multiple
signal instances to differentiate between emitters. While starting from
a good intention of facilitating the implementation of slots, it turned
out to be a bad API design as the signal isn't meant to know what it
will be connected to, and thus shouldn't carry parameters that are
solely meant to support a use case specific to the connected slot.
These pointers turn out to be unused in all slots but one. In the only
case where it is needed, it can be obtained by wrapping the slot in a
lambda function when connecting the signal. Do so, and drop the emitter
pointer from all signals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
The documentation suggests to use CameraConfiguration::operator[] to
access the StreamConfiguration it contains, but as CameraConfiguration
instances are generated by the Camera class and are returned wrapped in
a unique_ptr<>, the usage of operator[] would require an awkward syntax such
as (*config)[i].
Better to suggest the usage of the CameraConfiguration::at() function
instead to access the StreamConfigurations.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The PipelineHandler controls() and properties() functions are only used
by the Camera class. Now that the controls and properties are stored in
the Camera::Private class, we can drop those functions and access the
private data directly in Camera::controls() and Camera::properties().
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
With pipeline handlers now being able to subclass Camera::Private, start
the migration from CameraData to Camera::Private by moving the members
of the base CameraData class. The controlInfo_, properties_ and pipe_
members are duplicated for now, to allow migrating pipeline handlers one
by one.
The Camera::Private class is now properly documented, don't exclude it
from documentation generation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
In order to allow subclassing Camera::Private in pipeline handlers, pass
the pointer to the private data to the Camera constructor, and to the
Camera::createCamera() function.
The Camera::Private id_ and streams_ members now need to be initialized
by the Camera constructor instead of the Camera::Private constructor, to
allow storage of the streams in a pipeline handler-specific subclass of
Camera::Private.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The Extensible constructor takes a pointer to a Private instance, whose
lifetime it then manages. Make this explicit in the API by passing the
pointer as a std::unique_ptr<Private>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The Camera::Private class is defined in camera.cpp. To prepare for
allowing it to be subclassed by pipeline handlers, move it to a new
internal/camera.h header.
The \file comment block in camera.cpp now needs to explicitly tell which
camera.h file it refers to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The Extensible and Extensible::Private classes contain pointers to each
other. These pointers are initialized in the respective class's
constructor, by passing a pointer to the other class to each
constructor. This particular construct reduces the flexibility of the
Extensible pattern, as the Private class instance has to be allocated
and constructed in the members initializer list of the Extensible
class's constructor. It is thus impossible to perform any operation on
the Private class between its construction and the construction of the
Extensible class, or to subclass the Private class without subclassing
the Extensible class.
To make the design pattern more flexible, don't pass the pointer to the
Extensible class to the Private class's constructor, but initialize the
pointer manually in the Extensible class's constructor. This requires a
const_cast as the o_ member of the Private class is const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Now that all Extensible classes expose a _d() function that performs
appropriate casts, the LIBCAMERA_D_PTR brings no real additional value.
Replace it with direct calls to the _d() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Make Camera::stop() idempotent so that it can be called in any state and
consecutive times. When called in any state other than CameraRunning, it
is a no-op. This simplifies the cleanup path for applications.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
