The doxygen \todo directive doesn't need to be followed by a colon. Drop
it. While at it, turn one 'todo:' into '\todo'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Check if the buffer has a fence before making any modifications because
otherwise it is possible for `Request::addBuffer()` to return an error code
while at the same time the buffer - for all intents and purposes - is added
to the request.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Prepare the move of the Vector class from libipa to libcamera by copying
the relevant files into the corresponding libcamera directories. The
files are copied without modification.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
A LIBCAMERA_LOG_LEVELS value of "RkISP1:0" also applies to RkISP1Ccm and
RkISP1Awb. This behavior is unexpected as it automatically enables all
algorithm log categories when the intent is only to increase the log
level of the upper category. Fix that replacing the manual matching code
with fnmatch. This has the side effect that more wildcards ("?" and
"[...]") are supported which is acceptable but won't be advertised.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a data() function to the Matrix class to access the internal data.
This is useful for code that needs to use the matrix contents as a
linear array, as shown by the RkISP1::Ccm::process() function that needs
to copy the matrix data to a local variable. Simplify that function by
using the new accessor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Just return an `std::unique_ptr` constructed from an empty
initializer instead of doing a `reset()` on the existing
`config` variable and returning that. This is simpler.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
inputBufferReady ready signal in the simple pipeline is handled in the
pipeline handler thread. outputBufferReady and ispStatsReady signals
should be handled there too.
Rather than relying on the user of the SoftwareIsp instance, let
SoftwareIsp inherits Object. SoftwareIsp serves as a signal proxy, the
signals above are emitted from signal handlers. This means that if
SoftwareIsp inherits Object then the slots are invoked in SoftwareIsp
thread. Which is the camera manager thread because the SoftwareIsp
instance is created there.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The check for the number of outputs is done in a loop over the outputs.
It should be moved out of the loop as it's not loop specific and is just
repeated there.
This is a cosmetic change not changing any functionality.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The rkisp1 and rpi pipeline handlers duplicate code to handle the
LIBCAMERA_RKISP1_TUNING_FILE and LIBCAMERA_RPI_TUNING_FILE environment
variables that override tuning file selection. Move the common code to
IPAProxy::configurationFile() to avoid the duplication, and make the
feature available to all pipeline handlers with the same behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Handle the AeEnable under the hood in the Camera class, such that
AeEnable activates ExposureTimeMode and AnalogueGain together. This
allows applications the convenience of setting auto/manual mode of all
of the AE-related controls, as well as protecting applications against a
nasty behavior change if an aperture control is added in the future.
This also moves common handling code out of the IPA.
While we also want to inject AeEnable in Camera::controls() so that IPAs
don't have to report it, it is technically difficult at the moment as
ControlInfoMaps are not easily modifiable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In the redesign of the AE-related controls, the AeEnable control was
intended to be removed in favor of more specific sub-controls for
analogue gain and exposure time. However this will cause problems if
aperture sub-controls are introduced, and an application from a
pre-aperture era uses a camera that supports aperture.
If there is no AeEnable control, then a pre-aperture era application
might set analogue gain and exposure time to manual, while aperture
silently stays auto since that's the default mode. Thus aperture would
be uncontrollable by the application.
With an AeEnable control, then a pre-aperture era application can set
AeEnable to manual, and under the hood all three of analogue gain and
exposure time and aperture will be set to manual. The application won't
be able to set the manual aperture, however.
Although the above scenario is expected to be rare, the scenario with an
AeEnable control seems less detrimental. With an AeEnable control at
least the aperture would be static at a reasonably usable value, whereas
without an AeEnable the aperture would be more-or-less uncontrolable and
could go to extreme values as the AEGC algorithm tries to compensate for
the manual analogue gain and exposure time values.
Thus we redefine the AeEnable control, available only as a control and
not in metadata. It will be preprocessed by the Camera class so that the
relevant sub-controls are set. No pipline handler nor IPA shall act on
the AeEnable control. The IPA still has to report the control as
available, however.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Port the UVC pipeline handler to use the new ExposureTimeMode control
when processing Camera controls in place of the AeEnable control.
The V4L2_CID_EXPOSURE_AUTO control allows 4 possible values, which
map to ExposureTimeModeAuto and ExposureTimeModeManual.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
gcc 13.3.0, as provided by buildroot 2024.11.1, chokes when compiling
v4l2_subdevice.cpp with ASan enabled, due to the usage of the C++
standard library regex header:
In file included from /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/functional:59,
from ../../include/libcamera/base/utils.h:12,
from ../../include/libcamera/base/log.h:15,
from ../../include/libcamera/internal/v4l2_subdevice.h:20,
from ../../src/libcamera/v4l2_subdevice.cpp:8:
In constructor ‘std::function<_Res(_ArgTypes ...)>::function(std::function<_Res(_ArgTypes ...)>&&) [with _Res = bool; _ArgTypes = {char}]’,
inlined from ‘std::__detail::_State<_Char_type>::_State(std::__detail::_State<_Char_type>&&) [with _Char_type = char]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:149:4,
inlined from ‘std::__detail::_StateIdT std::__detail::_NFA<_TraitsT>::_M_insert_subexpr_begin() [with _TraitsT = std::__cxx11::regex_traits<char>]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:281:24:
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/std_function.h:405:42: error: ‘*(std::function<bool(char)>*)((char*)&__tmp + offsetof(std::__detail::_StateT, std::__detail::_State<char>::<unnamed>.std::__detail::_State_base::<unnamed>)).std::function<bool(char)>::_M_invoker’ may be used uninitialized [-Werror=maybe-uninitialized]
405 | : _Function_base(), _M_invoker(__x._M_invoker)
| ~~~~^~~~~~~~~~
In file included from /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/regex:65,
from ../../src/libcamera/v4l2_subdevice.cpp:11:
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h: In member function ‘std::__detail::_StateIdT std::__detail::_NFA<_TraitsT>::_M_insert_subexpr_begin() [with _TraitsT = std::__cxx11::regex_traits<char>]’:
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:279:17: note: ‘__tmp’ declared here
279 | _StateT __tmp(_S_opcode_subexpr_begin);
| ^~~~~
In member function ‘bool std::_Function_base::_M_empty() const’,
inlined from ‘std::function<_Res(_ArgTypes ...)>::operator bool() const [with _Res = bool; _ArgTypes = {char}]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/std_function.h:574:25,
inlined from ‘std::function<_Res(_ArgTypes ...)>::function(std::function<_Res(_ArgTypes ...)>&&) [with _Res = bool; _ArgTypes = {char}]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/std_function.h:407:6,
inlined from ‘std::__detail::_State<_Char_type>::_State(std::__detail::_State<_Char_type>&&) [with _Char_type = char]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:149:4,
inlined from ‘std::__detail::_StateIdT std::__detail::_NFA<_TraitsT>::_M_insert_subexpr_begin() [with _TraitsT = std::__cxx11::regex_traits<char>]’ at /host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:281:24:
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/std_function.h:247:37: error: ‘*(const std::_Function_base*)((char*)&__tmp + offsetof(std::__detail::_StateT, std::__detail::_State<char>::<unnamed>.std::__detail::_State_base::<unnamed>)).std::_Function_base::_M_manager’ may be used uninitialized [-Werror=maybe-uninitialized]
247 | bool _M_empty() const { return !_M_manager; }
| ^~~~~~~~~~
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h: In member function ‘std::__detail::_StateIdT std::__detail::_NFA<_TraitsT>::_M_insert_subexpr_begin() [with _TraitsT = std::__cxx11:
/host/aarch64-buildroot-linux-gnu/include/c++/13.3.0/bits/regex_automaton.h:279:17: note: ‘__tmp’ declared here
279 | _StateT __tmp(_S_opcode_subexpr_begin);
| ^~~~~
This is a false positive that previously occurred with gcc 12.1.0 and
was fixed in 12.2 (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105562),
and it seems to have now reappeared. The bug report indicates that the
probability of such false positives increase when using sanitizers. As
this isn't caught by CI, which compiles libcamera with gcc 13.3.0, the
chance that such compilation failures will appear in environments
without a clear pattern is relatively high. Work around the problem by
disabling the warning around the inclusiong of the regex header.
If the regex header needs to be included in other source files, creating
a wrapped in libcamera-base may be a cleaner alternative.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
As DmaSyncer disables the copy c'tor, the move c'tor will be used
instead. This leaves some DmaSyncers with invalid SharedFDs. They should
avoid syncing with invalid file descriptors in the d'tor.
Fixes: 545046a41e ("DmaBufAllocator: Make DmaSyncer non-copyable")
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Install the example configuration file of the virtual pipeline
handler as it serves documentation purposes, and to make the
virtual pipeline handler easily usable in CI.
Nonetheless, the file is installed with the ".example" suffix
so that it will not be used by default, to avoid cluttering
the camera lists of users whose distributions decide to
enable the virtual pipeline handler.
The file is installed in the proper location for convenience:
(1) is is easier to use it in the CI;
(2) users need not browse documentation to determine where
they should place the file.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The virtual pipeline handler prints an error message when its
configuration file can't be opened. Not providing a configuration file
is the default method to disable virtual cameras, so this error is
confusing for users. Replace it with a debug message when the
configuration file is not found, and keep an error message when it
exists but can't be opened.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The PipelineHandler::configurationFile() function prints an error
message when no configuration file is found. It can be useful for
pipeline handlers to silence the lookup operation and handle errors
themselves. Add a silent parameter to the function to enable this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Previously we call Thread::setThreadAffinityInternal in
Thread::startThread. The purpose was to avoid the main workload being
run on incorrect CPUs. This leads to a race condition of setting
`Thread::thread_` in `Thread::start()` and accessing
`Thread::setThreadAffinityInternal` though.
This patch moves the call after the construction of std::thread to avoid
the race condition. The downside is that the first tasks, if any, upon
starting a thread might be run on incorrect CPUs.
Fixes: 4d9db06d66 ("libcamera: add method to set thread affinity")
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some sensors support producing and transmitting embedded data over a
stream separate from the image stream. Add support for this feature in
the CameraSensor interface, and implement it for the CameraSensorRaw
class. The CameraSensorLegacy uses the default stub implementation, as
the corresponding kernel drivers don't support embedded data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a new CameraSensorRaw implementation of the CameraSensor interface
tailored to devices that implement the new V4L2 raw camera sensors API.
This new class duplicates code from the CameraSensorLegacy class. The
two classes will be refactored to share code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
With support for metadata in the streams API, the v4l2_meta_format
structure has been extended with width, height and bytesperline fields.
Support them in the V4L2VideoDevice getFormat() and setFormat()
functions is the video device is meta capture device and if the
pixel format is one of the generic line-based metadata formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
As DmaSyncer does sync start/end in the c'tor/d'tor, copying a DmaSyncer
instance would trigger sync end earlier than expected. This patch makes
it non-copyable to avoid the issue.
Fixes: 39482d59fe ("DmaBufAllocator: Add Dma Buffer synchronization function & helper class")
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
After the initial generation, when a frame is requested,
the test pattern generator rotates the image left by 1 column.
The current approach has two shortcomings:
(1) it allocates a temporary buffer to hold one column;
(2) it swaps two columns at a time.
The test patterns are simple ARGB images, in row-major order,
so doing (2) works against memory prefetching. This can be
addressed by doing the rotation one row at a time as that way
the image is addressed in a purely linear fashion. Doing so also
eliminates the need for a dynamically allocated temporary buffer,
as the required buffer now only needs to hold one sample,
which is 4 bytes in this case.
In an optimized build, this results in about a 2x increase in the
number of frames per second as reported by `cam`. In an unoptimized,
ASAN and UBSAN intrumented build, the difference is even bigger,
which is useful for running lc-compliance in CI in a reasonable time.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
`PixelFormatInfo::planes.size()` always returns 3 since `planes` is
an array, but that is not the number of planes of the pixel format.
Use the `numPlanes()` getter instead.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
For manual control it is helpful to be able to specify a fixed colour
temperature. It also provides an easy way to apply the temperature
specific CCMs and colour gains that are contained in the tuning files.
Document this and update the control dependencies.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add support to ControlId for querying direction information. This allows
applications to query whether a ControlId is meant for being set in
controls or to be returned in metadata or both. This also has a side
effect of properly encoding this information, as previously it was only
mentioned losely and inconsistently in the control id definition.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Plumb the Pipeline-IPA loop in.
Load the IPA module at camera creation time and create the loop between
the pipeline and the IPA.
When a new Request is queued the IPA is asked to prepare the parameters
buffer, once ready it notifies the pipeline which queues the parameters
to the ISP along with a buffer for statistics and frames,
Once statistics are ready they get passed to the IPA which upates its
settings for the next frame.
Driveby fix an error message in the Pipeline Handler's ::freeBuffers()
function which reported a problem with the wrong video device in an
error path.
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acquire the mali-c55 3a stats and parameters video devices during
::match() and plumb them in.
For this commit we simply allocate and release buffers for the
statistics and parameters. Statistics buffers are queue and dequeued
from the stats video device but their contents are for now untouched.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Now that we have camera sensor control application delay values in
the CameraSensorProperties class, remove the duplicated definitions
in the RPi IPA's CameraSensorHelpers and update the pipeline handler
to use the values from CameraSensorProperties.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add entries for the OmniVision OV7251 and OV9281 sensors. The control
delay values are drawn from the Raspberry Pi CameraSensorHelper class
for these sensors - the pixel sizes from the datasheets. Both sensors
are monochrome and do not have test pattern settings that correspond
to defined control values.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In RkISPPath::validate() the sensor sizes are correctly filtered to the
ones supported by the ISP. But later in RkISPPipeline::configure() the
configured stream size is passed to sensor->getFormat() and the
CameraSensor class chooses the best sensor format for the requested
stream size. This can result in a sensor format that is too big for the
ISP. Fix that by supplying the maximum resolution supported by the ISP
to setFormat().
Fixes: 761545407c ("pipeline: rkisp1: Filter out sensor sizes not supported by the pipeline")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The getFormat function takes the aspect ratio and the area of the
requested size into account when choosing the best sensor size. In case
the sensor is connected to an rkisp1 the maximum supported frame size of
the ISP is another constraining factor for the selection of the best
format. Add a maxSize parameter to support such a constraint.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
When the dewarper is used, config->validate() needs to take the
restrictions of the dewarper into account. Add the corresponding checks.
As the useDewarper_ variable is now accessed earlier in
PipelineHandlerRkISP1::configure(), ensure it gets set early enough.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
For the validate() implementation, the RkISP1CameraConfiguration needs
access to dewarper related members of the PipelineHandlerRkISP1 object.
Allow this access by adding const versions of the pipe accessors and
making RkISP1CameraConfiguration a friend of PipelineHandlerRkISP1.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
In configure() and in the future in generateConfiguration() the
calculated stream sizes and crop rectangles depend on the dewarper being
available or not. It is therefore not possible to disable the dewarper
later if configuration fails. Error out in that case.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Refactor validation code to prepare for extensions in the upcoming
patches. Code duplication is reduced by moving parts of the validation
logic into a lambda function. This patch does not include any functional
changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Add to the Converter interface two functions used by pipeline handlers
to validate and adjust the converter input and output configurations
by specifying the desired alignment for the adjustment.
Add the adjustInputSize() and adjustOutputSize() functions that allows
to adjust the converter input/output sizes with the desired alignment.
Add a validateOutput() function meant to be used by the pipeline
handler implementations of validate(). The function adjusts a
StreamConfiguration to a valid configuration produced by the Converter.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
ScalerCrop is specified as being in sensor coordinates. The current
dewarper implementation on the imx8mp handles ScalerCrop in dewarper
coordinates. This leads to unexpected results and an unusable ScalerCrop
control in camshark. Fix that by transforming back and forth between
sensor coordinates and dewarper coordinates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
