Address a long standing \todo item that suggested to implement a
read-only interface for the Request::metadata() accessor and deflect to
the internal implementation for the read-write accessor used by pipeline
handlers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
When the dewarper is present it can handle arbitrary orientations
specified in the requested camera configuration. In that case handle all
transformations inside the dewarper (even if the sensor supports some of
them) because that makes it easier to handle coordinates for lens
dewarping inside the dewarper.
This complicates the path selection a bit, as for transformations that
include a transpose, the format before the dewarper has swapped
width/height.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
To do actual lens dewarping, the dewarper will be configured based on
the tuning file.
As a first step implement the basic loading of the
tuning file and enable/disable the dewarper for the given camera based
on the existence of the "Dewarp" entry under a new top level element
'modules' in the tuning file.
Note: This is an backwards incompatible change in that the dewarper is
currently included in the chain unconditionally. Some users may want to
not use the dewarper, so it is sensible to make that configurable.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
In raw mode the number of configurations is actively limited to 1. It is
therefore safe to move isRaw up one level to simplify the code and
prepare for later use.
During that rework it was noticed that the old code actually has a bug
in that it reduces the number of configurations to 1 in case a raw
config is found, but it doesn't reduce the config vector to that raw
config, but the first config.
Change that behavior to check the first config and either remove all
remaining configs if the first is raw or drop all raw configs if the
first is non-raw.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The dewarper integration into the rkisp1 pipeline is quite complicated.
Simplify that by switching to the now available ConverterDW100Module. As
there is no other known converter in combination with the rkisp1 ISP this
is a safe step to do.
This change also paves the way to implement dw100 specific features later.
The input crop implemented in the dw100 kernel driver is quite limited
in that it doesn't allow arbitrary crop rectangles but only scale
factors quantized to the underlying fixed point representation and only
aspect ratio preserving crops.
The vertex map based implementation allows for pixel perfect crops. The
only downside is that ScalerCrop can no longer be set dynamically on
older kernels. A corresponding warning is already implemented in the
converter module.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When the dewarper is used, an addition buffer loop with
kRkISP1MinBufferCount buffers is created between ISP and dewarper. When
the dewarper is configured, it stores the bufferCount value of the
requested stream configurations. This number of buffers is then imported
when the dewarper is started.
On the input stream of the dewarper the bufferCount is currently left
unchanged, meaning it carries the bufferCount as supplied by the user
instead of the bufferCount of the additional loop. Fix that by setting
the bufferCount to kRkISP1MinBufferCount.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
In order to allow digital zooming, scale down in the dewarper instead of
the resizer. That means forwarding the full sensor size data to the
dewarper. The ScalerCrop rectangle will also be applied at the dewarper.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The decision if the dewarper shall be used is not per pipeline but per
camera and per configuration (raw streams can't use it). Move the
corresponding flag into the camera data class. Rename the flag to
"usesDewarper" which is easier understand when we later add the ability
to enable/disable the dewarper on a per camera basis which will be
expressed using a "canUseDewarper" flag.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
In case the buffer returned from the ISP was canceled, the upstream
buffer was not correctly marked as canceled. Move the cancel
functionality into an own helper function and correctly cancel the
upstream buffers. Add missing cancellation in case queuing to the
dewarper fails.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Isaac Scott <isaac.scott@ideasonboard.com>
With the upcoming addition of V4L2 requests support, the converters need
to keep a handle to the corresponding media device.
Prepare for that by changing the constructor parameter from a raw
pointer to a shared pointer.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Isaac Scott <isaac.scott@ideasonboard.com>
Adapt the PipelineHandler::acquireMediaDevice() support function to
return a shared pointer instead of the underlying raw pointer.
Propagate this update to all pipeline handlers that use the MediaDevice
and store a std::shared_ptr<MediaDevice> accordingly.
This is required to support media devices that are potentially shared
among multiple pipeline handlers, like a dewarper implemented as v4l2
m2m device.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Isaac Scott <isaac.scott@ideasonboard.com>
The DelayedControls class works around a limitation of the V4L2 controls
API by assigning to controls that modify the limits of other controls a
'priority' flag.
'Priority' controls are written to the device before others to make sure
the limits of dependent controls are correctly updated.
A typical example of a priority control is VBLANK, whose value changes the
limits of the EXPOSURE control. This doesn't apply to a specific hardware
platform but to all V4L2 sensors.
The RkISP1 pipeline handler doesn't mark VBLANK as a priority control, an
issue which might result in the exposure being clamped to an outdated frame
length.
Fix the rkisp1 pipeline by marking VBLANK as a priority control.
Fixes: f72c76eb6e ("rkisp1: Honor the FrameDurationLimits control")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Query the params device for RKISP1_CID_SUPPORTED_PARAMS_BLOCKS and
inject the information into the IPA hardware context for use by the
algorithms.
To be able to modify the hardware configuration at runtime, replace the
pointer with an instance and create a copy of the static hardware
specific data.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When the extensible parameters queued to the kernel contain an unknown
block type it fails with -EINVAL. This should not happen as user land is
supposed to check for the supported parameter types. But it took a while
to figure out where things went wrong. Add a error statement when
queuing of the parameter buffer fails for whatever reason.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
There is no reason to allocate the frame info objects dynamically,
and then store raw pointers in the `std::map` in the rkisp1
and ipu3 pipeline handler.
Instead, store the objects directly in the map. This removes
the need for manually calling new/delete, simplifies the code,
and eliminates one memory allocation per frame.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently the rkisp1 pipeline handler relies on bufferCount to decide on
the number of parameter and statistics buffers to allocate internally.
Instead, the number of internal buffers should be the minimum required
by the pipeline to keep the requests flowing, in order to avoid wasting
memory.
Stop relying on bufferCount for these numbers and instead set them to
kRkISP1MinBufferCount.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <uajain@igalia.com>
The StreamConfiguration::bufferCount is reset to a hardcoded value of 4
in RkISP1Path::validate(). Keep the minimum value of 4 but do not reset
it, if it was set to a larger value. This allows the user to set
bufferCount to an arbitrary number of buffers which then can be
allocated for example by the FrameBufferAllocator. If the bufferCount is
set to a smaller value it gets reset to kRkISP1MinBufferCount again and
the configuration is marked as adjusted.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <uajain@igalia.com>
To keep the regulation of the algorithms as fast as possible and at the
same time allow more buffers to be allocated, limit the amount of
buffers that get queued into the device to the pipeline depth plus a
tiny margin.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
Reviewed-by: Umang Jain <uajain@igalia.com>
The rkisp1 and rpi pipeline handlers duplicate code to handle the
LIBCAMERA_RKISP1_TUNING_FILE and LIBCAMERA_RPI_TUNING_FILE environment
variables that override tuning file selection. Move the common code to
IPAProxy::configurationFile() to avoid the duplication, and make the
feature available to all pipeline handlers with the same behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
In RkISPPath::validate() the sensor sizes are correctly filtered to the
ones supported by the ISP. But later in RkISPPipeline::configure() the
configured stream size is passed to sensor->getFormat() and the
CameraSensor class chooses the best sensor format for the requested
stream size. This can result in a sensor format that is too big for the
ISP. Fix that by supplying the maximum resolution supported by the ISP
to setFormat().
Fixes: 761545407c ("pipeline: rkisp1: Filter out sensor sizes not supported by the pipeline")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
When the dewarper is used, config->validate() needs to take the
restrictions of the dewarper into account. Add the corresponding checks.
As the useDewarper_ variable is now accessed earlier in
PipelineHandlerRkISP1::configure(), ensure it gets set early enough.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
For the validate() implementation, the RkISP1CameraConfiguration needs
access to dewarper related members of the PipelineHandlerRkISP1 object.
Allow this access by adding const versions of the pipe accessors and
making RkISP1CameraConfiguration a friend of PipelineHandlerRkISP1.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
In configure() and in the future in generateConfiguration() the
calculated stream sizes and crop rectangles depend on the dewarper being
available or not. It is therefore not possible to disable the dewarper
later if configuration fails. Error out in that case.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Refactor validation code to prepare for extensions in the upcoming
patches. Code duplication is reduced by moving parts of the validation
logic into a lambda function. This patch does not include any functional
changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
ScalerCrop is specified as being in sensor coordinates. The current
dewarper implementation on the imx8mp handles ScalerCrop in dewarper
coordinates. This leads to unexpected results and an unusable ScalerCrop
control in camshark. Fix that by transforming back and forth between
sensor coordinates and dewarper coordinates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Query the crop bounds on the dewarper instead of the stream in case the
camera was not yet configured when updateControls() gets called. This
provides sane defaults for the controls.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
The sensorInfo (specifically the crop rectangle of the selected sensor
mode) is collected to be passed to the IPA later. In an upcoming patch
that data will also be needed for correct ScalerCrop handling. Move the
collection of the sensorInfo before the dewarper configuration step and
refactor the code a bit.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
One Rectangle instance is used to calculate the inputCrop and the
outputCrop of the ISP in the rkisp1 pipeline. Split that into two
distinct variables, because both values will be needed in the upcoming
patches. This patch does not contain any functional changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
In the current code, the input stage of the image resizer is used to
apply a crop to keep the aspect ratio in cases where the requested
output aspect ratio differs from the one of the selected sensor mode. On
the imx8mp the resizer hardware is not capable of cropping (for
reference see also rkisp1-resizer.c:rkisp1_rsz_set_sink_crop() in the
linux kernel v6.10).
Therefore apply the necessary cropping on the output of the ISP (on the
image stabilization block). The cropping code on the image resizer
doesn't need modifications as the requested crop gets ignored by the
kernel.
While at it, remove a todo comment that is no longer needed.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
The names used by the IPA interface and the names used for buffer
completions handlers in libcamera clash in the use of the term "buffer".
For example video device buffer completion handler is called
"bufferReady" and the IPA event to ask the IPA to compute parameters are
called "fillParamsBuffers". This makes it hard to recognize which
function handles video device completion signals and which ones handle
the IPA interface events.
Rationalize the naming scheme in the IPA interface function and events
and the signal handlers in the pipelines, according to the
following table. Remove the name "buffer" from the IPA interface events
and events handler and reserve it for the buffer completion handlers.
Rename the IPA interface events and function to use the 'params' and
'stats' names as well.
IPA Interface:
- fillParamsBuffer -> computeParams [FUNCTION]
- processStatsBuffer -> processStats [FUNCTION]
- paramFilled -> paramsComputed [EVENT]
Pipeline handler:
- bufferReady -> videoBufferReady [BUFFER HANDLER]
- paramReady -> paramBufferReady [BUFFER HANDLER]
- statReady -> statBufferReady [BUFFER HANDLER]
- paramFilled -> paramsComputed [IPA EVENT HANDLER]
Cosmetic change only, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The "useDewarper_" class variable is set to true during configure
only if the configuration is !isRaw.
The main path buffer pool creation can thus be moved out of the
if (!isRaw) block at allocateBuffers() time.
Cosmetic change that will make it easier to create a buffer pool
for the main and self paths unconditionally in future.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Plumb the dw100 dewarper as a V4L2M2M converter in the rkisp1 pipeline
handler. If the dewarper is found, it is instantiated and buffers are
exported from it, instead of RkISP1Path. Internal buffers are allocated
for the RkISP1Path in case where dewarper is going to be used.
The RKISP1 pipeline handler now supports scaler crop control through
the converter. Register the ScalerCrop control for the cameras created
in the RKISP1 pipeline handler.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Currently the rkisp1 pipeline handler only registers controls that are
related to the IPA. This patch prepares the rkisp1 pipeline-handler to
register camera controls which are not related to the IPA.
Hence, introduce an additional ControlInfoMap for IPA controls. These
controls will be merged together with the controls in the pipeline
handler (introduced subsequently) as part of updateControls() and
together will be registered during the registration of the camera.
This is similar to what IPU3 pipeline handler handles its controls.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Integrate the RkISP1 pipeline handler to support sensor configuration
provided by applications through CameraConfiguration::sensorConfig.
The SensorConfiguration must be validated on both RkISP1Path (mainPath
and selfPath), so the parameters of RkISP1Path::validate() have been
updated to include sensorConfig.
The camera configuration will be marked as invalid when the sensor
configuration is supplied, if:
- Invalid sensor configuration (SensorConfiguration::isValid())
- Bit depth not supported by RkISP1 pipeline
- Sensor configuration output size is larger than maximum supported
sensor's size on RkISP1 pipeline
- No matching sensor configuration output size supplied by the sensor
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
Jacopo Mondi
Stefan Klug
Kieran Bingham
Laurent Pinchart
Barnabás Pőcze
Nícolas F. R. A. Prado
Paul Elder
Daniel Scally
Umang Jain
Milan Zamazal