When the configuration file for an IPA module is missing, it is reported
as an error in the log, for example:
ERROR IPAProxy ipa_proxy.cpp:149 Configuration file 'imx219.yaml' not found for IPA module 'simple'
This is misleading because several pipelines use uncalibrated.yaml in
such a case and can continue working. And in case of software ISP,
there is currently no other configuration file so the error is always
reported.
On the other hand, in some other cases the presence of the configuration
file is required and it is an error if it is missing.
Let's introduce a new optional argument to IPAProxy::configurationFile
that specifies a fallback file if the requested file is not found. If
the primary requested file is not found and a non-empty fallback file is
specified then a warning is logged and the fallback file is looked up.
If neither the fallback file can be found then only then an error is
logged and the method returns an empty string. This change has also the
benefit of putting the common fallback file ("uncalibrated.yaml")
pattern to a single place.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
SimplePipelineHandler::match may be called several times for different
pipeline configurations. Not all of these calls must succeed. For
example, for TI AM69 board with a single camera attached, the following
error is reported in the log even when libcamera works fine:
ERROR SimplePipeline simple.cpp:1558 No sensor found
This is because a sensor is found for /dev/media0 but not for
/dev/media1. The error is harmless in such a case and only confuses
users who may think no camera is detected at all. Let's change the
error to info and add the device node to the message to indicate the
error is specific to the given media only. It's up to the callers to
report a fatal error condition if libcamera cannot work due to no
matching pipeline configuration.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The converter interface uses the unsigned int output stream index to map
to the output frame buffers. This is cumbersome to implement new
converters because one has to keep around additional book keeping
to track the streams with their correct indexes.
The v4l2_converter_m2m and simple pipeline handler are adapted to
use the new interface. This work roped in software ISP as well,
which also seems to use indexes (although it doesn't implement converter
interface) because of a common conversionQueue_ queue used for
converter_ and swIsp_.
The logPrefix is no longer able to generate an index from a stream, and
is updated to be more expressive by reporting the stream configuration
instead, for example, reporting "1920x1080-MJPEG" in place of
"stream0".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> # sm8250 RB5
generateConfiguration() called validate() as a final step, causing the
stride and frameSize fields in StreamConfiguration to be filled in based
on the pixel format and width/height.
If a user application did not clear the stride field when setting up a
custom pixel format and width/height, the pipeline handler would respect
this stride and possibly overallocate buffers with a larger stride than
needed.
Fix this by removing the call to validate() completely, leaving the
stride and frameSize fields defaulting to 0. Removal of this call is
inconsequential as we hard-code a valid configuration for Raspberry Pi
platforms in generateConfiguration().
Bug: https://github.com/raspberrypi/libcamera/issues/138
Bug: https://github.com/raspberrypi/libcamera/issues/141
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Users of the DmaHeap class really just want some way to allocate
dma-buffers from userspace. This can also be done by using /dev/udmabuf
instead of using /dev/dma_heap/*.
Rename DmaHeap class to DmaBufAllocator in preparation of adding
/dev/udmabuf support.
And update the DmaHeap class docs to match including replacing references
to "dma-heap type" with "dma-buf provider".
This is a pure automated rename on the code ('s/DmaHeap/DmaBufAllocator/')
+ file renames + doc updates. There are no functional changes.
The DmaBufAllocator objects in vc4.cpp and software_isp.cpp are left named
dmaHeap_ to keep the changes to those 2 files to a minimum.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Starting in kernel v5.16, the vimc driver stopped hardcoding the scaler
factor. Use this to lift constraints on the camera configuration, and in
particular on the exotic output size alignment to a multiple of 6. As a
result, vimc-based cameras can more easily match common display
resolutions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
The PipelineHandlerFactoryBase class has a name that is propagated to
the PipelineHandler instance it creates.
In present implementation, this name comes from the
REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the
stringified name of the PipelineHandler derived class. Therefore,
PipelineHandler factories and instances names can be quite long such as
"PipelineHandlerRkISP1".
A libcamera user may have to explicitly refer to a PipelineHandler name
for configuration purpose: one usage of the name can be to define a
pipeline handlers match list and their priorities. It is desired, for
user convenience, to use a short name to designate a pipeline handler.
Reusing the short pipeline names already defined in the meson option
files is an existing and consistent way of naming pipelines.
This change adds an explicit name parameter to the
REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to
define the name of a pipeline handler factory, instead of the current
pipeline handler class name.
Each pipeline registration is updated accordingly. The short name
assigned corresponds to the pipeline directory name in the source tree.
It is consistent with pipelines names used in meson.
Changing the pipeline name has an impact on the IPA modules: each module
defines a IPAModuleInfo structure. This structure has a pipelineName
member defining the pipeline handler name it shall match with.
Therefore, each internal IPA module definition has to be changed to have
its IPAModuleInfo pipelineName name updated with the short pipeline
handler name.
In addition to this pipelineName member, the IPAModuleInfo structure
also has a name member, associated to the IPA module name. Having
renamed the pipelines to a short name, the pipeline name and the IPA
module names of the IPAModuleInfo structure are the same: for in-tree
IPA, they correspond to the respective pipeline and IPA subdirectories
in the source tree. However the IPA name could be different, for
instance with a close source IPA implementation built out-of-tree. Thus,
it makes sense to keep the IPA name in that structure, as the 2
definitions may not always be redundant.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust for clang-format style fix, reformat commitmsg]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Some V4L2 formats translate to the same pixel format, e.g. YU12 and
YM12 both produce YUV420. In this case our ISP driver advertises the
same size range for both, but we must not record the same thing twice
for the same pixel format (which will cause a failure later on).
Instead, ignore the V4l2 format if the pixel format has already been
seen.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
To enable the Simple Soft ISP and Soft IPA for simple pipeline handler
configure the build with:
-Dpipelines=simple -Dipas=simple
Also using the Soft ISP for the particular hardware platform must
be enabled in the supportedDevices[] table. It is currently enabled
for and only for qcom-camss.
If the pipeline uses Converter, Soft ISP and Soft IPA aren't
available.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The converterBuffers_ and the converterQueue_ are not that specific
to the Converter, and could be used by another entity doing the format
conversion.
Rename converterBuffers_, converterQueue_, and useConverter_ to
conversionBuffers_, conversionQueue_ and useConversion_ to
disassociate them from the Converter.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
SimpleCameraConfiguration::validate() adjusts the configuration of its
streams (if the size is not in the outputSizes) to the captureSize. But
the captureSize itself can be not in the outputSizes, and then the
adjusted configuration won't be valid resulting in camera configuration
failure.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Pipeline handlers may need to know the Bayer order produced by the
sensor when a Transform is applied (horizontal or vertical flip). This
is currently implemented manually in the Raspberry Pi pipeline handler.
Move the implementation to the CameraSensor class to make it usable in
other pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
The V4L2Subdevice class deals with streams in two places:
- In routing tables, streams as expressed as a pad number and a stream
number in a v4l2_subdev_route instance.
- In the format and selection get and set functions, streams as
expressed using the Stream structure, which binds the pad number and
stream number.
Expressing streams in different ways requires pipeline handlers and
other helpers to convert between the two representations. This isn't
much of an issue yet as libcamera has little stream-aware code, but it
is expected to increasingly become a burden.
To simplify the API, introduce a V4L2Subdevice::Route structure that
mimicks the kernel v4l2_subdev_route structure but represents streams as
V4L2Subdevice::Stream instances. This will improve seamless integration
of routes, formats and selection rectangles.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The main (and only at the moment) use case for the Routing::toString()
function is to print a representation of the routing table in a log
message. The function is implemented using an std::stringstream, and the
returned std::string is then inserted into an std::ostream. This is
inefficient. Replace the function with a specialization of the
operator<<() and use it in the caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The V4L2SubdeviceFormat::mbus_code member doesn't follow the libcamera
coding style as it should use camelCase. Fix it by renaming it to just
'code', to shorten lines in addition to fixing the coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The camera pipeline for MediaTek MT8365 consists of the following:
Raw sensor (+ external ISP) --> SENINF --> CAMSV30 --> DRAM
SENINF (SENsor INterFace) is a CSI-2 receiver.
CAMSV30 (Camera Simple Version) is a DMA Engine which bypasses
ISP3.0 and writes directly to DRAM.
Both SENINF and CAMSV30 are supported by V4L2 drivers.
MT8365 platform consists of a hardware converter called MDP which
supports up to three streams.
Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When validating a stream, and no valid packed pixel format can be
found, see if an unpacked format can be used instead.
This is particularly helpful for 8 (and 16) bit raw formats, where
asking for a packed format would previously have failed. Now the
configuration will be adjusted to give you a format (in fact, the only
format) that will work.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Vc4CameraData::findMatchBuffers() may return successfully with a null
embedded buffer, in which case the embedded buffer id would be left
uninitialized.
Without this change, libcamera v0.2.0 usually crashes for me with an
assertion error:
ipa_base.cpp:397 assertion "it != buffers_.end()" failed in prepareIsp()
Signed-off-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When converting from StreamConfiguration to V4L2DeviceFormat, the stride
was being dropped with the result that users could not request a custom
stride.
Set the stride in the V4L2DeviceFormat to prevent this happening.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
If no ISP output streams are configured, the ISP output count is skipped
for the the low res stream, and causes the drop frame logic to fail
because of a count mismatch. This in-turn stops any requests from
completing correctly.
Fix this by ensuring the low res output is counted correctly when no ISP
output streams are configured.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Replace the usage of CameraConfiguration::transform with the newly
introduced CameraConfiguration::orientation.
Rework and rename the CameraSensor::validateTransform(transform) to
CameraSensor::computeTransform(orientation), that given the desired
image orientation computes the Transform that pipeline handlers should
apply to the sensor to obtain it.
Port all pipeline handlers to use the newly introduced function.
This commit breaks existing applications as it removes the public
CameraConfiguration::transform in favour of
CameraConfiguration::orientation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the pipeline runs out of embedded data buffers, then it will pass
the frame to the IPA without the metadata. The IPA then has to use the
delayed controls as inputs to the algorithms. This can cause problems
with the subsequent algorithms if the sensor did not action the
controls, especially with the autofocus as that doesn't have controls
which can be passed in lieu of the metadata.
Reduce the likelihood of this by increasing the number of embedded data
buffers, as they are small so a generous number can be allocated.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Move the handling of Bayer order changes due to flips to run before
platformValidate(). This removes the need for this code to be split
between platformValidate() and validate() as it is right now.
Also add some validation to ensure the vc4 pipeline handler only
supports CSI2 packing or no packing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Record if additional software downscaling is needed for a particular
stream in the RPi::Stream class. Additional software downscaling may be
needed if the user required downscale factor is greater than what the
ISP hardware is capable of.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add the PiSP Frontend and Backend SharedMemObject file descriptors to
the ipa::init() call. This will allow the pipeline handler to pass these
objects to the IPA after construction.
Add a flag to indicate if buffer swaps are needed when starting the
ISP for the stitch block.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add new SharedMemObject class that wraps a memfd memory allocation and
constructs a templated object in the memory. With appropriate locking,
this object can then be shared across different processes using the
associated allocation file handle.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a new "Recurrent" stream flag. This flag indicates the stream buffer
handling/management happend from the pipeline handler exclusively. This
is used for TDN/Stitch and Config streams.
Add a new Needs32bitConv stream flag to indicate that this stream needs
a software postprocessing conversion run on it before returning out to
the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a new RequiresMmap flag to the RPi::Stream class indicating that
buffers handled by the stream must be mmapped after allocation and
cached internally.
Add a new member function getBuffer(id) which can be used to obtain the
mapped buffers for a given buffer id.
Add a new member function acquireBuffer() which can be used to obtain
any mapped buffer that has not already been acquired by the caller.
As a drive-by, add the <algorithm> header to rpi_stream.cpp as it is
needed for the std::find_if() function.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
This commit simplifies the validate() and configure() calls in the
pipeline handler in a number of ways:
- Determine the V4L2DeviceFormat structure fields for all streams
in validate(), cache them and reuse in configure() instead of
re-generating this structure multiple times.
- Remove setting a default pixel format in validate(), this code patch
will not be used.
- Use the recently added updateStreamConfig() and toV4L2DeviceFormat()
helpers to populate fields in the V4L2DeviceFormat and StreamConfiguration
structures to reduce code duplication.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Switch to XRGB8888 as a default Viewfinder role output format, this is a
more correct description of the ISP hardware output, and what is
accepted by the Raspberry Pi hardware.
Switch to YUV420 as a default output format for everything else, as this
format is best supported by encoding (e.g. H.264, JPEG) sinks on the
Raspberry Pi platform.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This commit simplifies the validate() and configure() calls in the
pipeline handler in a number of ways:
- Only pass the RPiCameraConfiguration structure into platformValidate()
and platformConfigure().
- Determine the V4L2DeviceFormat structure fields for all streams in
validate(), cache them and reuse in configure() instead of
re-generating this structure multiple times.
- Use the recently added updateStreamConfig() and toV4L2DeviceFormat()
helpers to populate fields in the V4L2DeviceFormat and
StreamConfiguration structures to reduce code duplication.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a helper updateStreamConfig() that updates the format related fields
in a StreamConfiguration from a given V4L2DeviceFormat structure.
Add and override to the toV4L2DeviceFormat() helper that returns a
V4L2DeviceFormat structure populated from the format related fields in
a StreamConfiguration.
Both these helper functions will be used in a future commit to simplify
the Raspberry Pi pipeline handler configuration/validation code.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Currently, the stream configuration is stored in two vectors, rawStreams
and outStreams for convenience. However, these vectors are constructed
in both platformValidate() and platformConfigure().
This change caches these vectors in the RPiCameraConfiguration class to
construct them only once in platformValidate().
Pass a pointer to the current configuration to platformValidate() and
platformConfigure() so that they can access the streams vectors.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
