ipa: raspberrypi: Add support for imx290/imx327 sensors

imx290 and imx327 share the same kernel driver (imx290.c) and are
therefore both recognised here as "imx290". We add the necessary
CamHelper for these sensors, as well as a camera tuning file.

The tuning was done with an Innomaker STARVIS IMX327LQR module. These
have no IR cut filter so there is no proper colour tuning. However,
you should obtain reasonable results for most modules using this
sensor. Specific tunings for further modules can always be added
subsequently.

To use this sensor on the Raspberry Pi platform, please add

dtoverlay=imx290,clock-frequency=74250000

into your /boot/config.txt file.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This commit is contained in:
David Plowman
2021-03-09 00:54:23 +02:00
committed by Laurent Pinchart
parent 18691c538b
commit 8f3a54ae6a
4 changed files with 234 additions and 0 deletions
+165
View File
@@ -0,0 +1,165 @@
{
"rpi.black_level":
{
"black_level": 3840
},
"rpi.dpc":
{
},
"rpi.lux":
{
"reference_shutter_speed": 6813,
"reference_gain": 1.0,
"reference_aperture": 1.0,
"reference_lux": 890,
"reference_Y": 12900
},
"rpi.noise":
{
"reference_constant": 0,
"reference_slope": 2.67
},
"rpi.geq":
{
"offset": 187,
"slope": 0.00842
},
"rpi.sdn":
{
},
"rpi.awb":
{
"bayes": 0
},
"rpi.agc":
{
"speed": 0.2,
"metering_modes":
{
"matrix":
{
"weights":
[
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
]
},
"centre-weighted":
{
"weights":
[
3, 3, 3, 2, 2, 2, 2, 1, 1, 1, 1, 0, 0, 0, 0
]
},
"spot":
{
"weights":
[
2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
]
}
},
"exposure_modes":
{
"normal":
{
"shutter":
[
10, 30000, 60000
],
"gain":
[
1.0, 2.0, 8.0
]
},
"sport":
{
"shutter":
[
10, 5000, 10000, 20000, 120000
],
"gain":
[
1.0, 2.0, 4.0, 6.0, 6.0
]
}
},
"constraint_modes":
{
"normal":
[
],
"highlight":
[
{
"bound": "LOWER", "q_lo": 0.98, "q_hi": 1.0, "y_target":
[
0, 0.5, 1000, 0.5
]
},
{
"bound": "UPPER", "q_lo": 0.98, "q_hi": 1.0, "y_target":
[
0, 0.8, 1000, 0.8
]
}
]
},
"y_target":
[
0, 0.16, 1000, 0.16, 10000, 0.16
]
},
"rpi.alsc":
{
"omega": 1.3,
"n_iter": 100,
"luminance_strength": 0.7,
"luminance_lut":
[
2.844, 2.349, 2.018, 1.775, 1.599, 1.466, 1.371, 1.321, 1.306, 1.316, 1.357, 1.439, 1.552, 1.705, 1.915, 2.221,
2.576, 2.151, 1.851, 1.639, 1.478, 1.358, 1.272, 1.231, 1.218, 1.226, 1.262, 1.335, 1.438, 1.571, 1.766, 2.067,
2.381, 2.005, 1.739, 1.545, 1.389, 1.278, 1.204, 1.166, 1.153, 1.161, 1.194, 1.263, 1.356, 1.489, 1.671, 1.943,
2.242, 1.899, 1.658, 1.481, 1.329, 1.225, 1.156, 1.113, 1.096, 1.107, 1.143, 1.201, 1.289, 1.423, 1.607, 1.861,
2.152, 1.831, 1.602, 1.436, 1.291, 1.193, 1.121, 1.069, 1.047, 1.062, 1.107, 1.166, 1.249, 1.384, 1.562, 1.801,
2.104, 1.795, 1.572, 1.407, 1.269, 1.174, 1.099, 1.041, 1.008, 1.029, 1.083, 1.146, 1.232, 1.364, 1.547, 1.766,
2.104, 1.796, 1.572, 1.403, 1.264, 1.171, 1.097, 1.036, 1.001, 1.025, 1.077, 1.142, 1.231, 1.363, 1.549, 1.766,
2.148, 1.827, 1.594, 1.413, 1.276, 1.184, 1.114, 1.062, 1.033, 1.049, 1.092, 1.153, 1.242, 1.383, 1.577, 1.795,
2.211, 1.881, 1.636, 1.455, 1.309, 1.214, 1.149, 1.104, 1.081, 1.089, 1.125, 1.184, 1.273, 1.423, 1.622, 1.846,
2.319, 1.958, 1.698, 1.516, 1.362, 1.262, 1.203, 1.156, 1.137, 1.142, 1.171, 1.229, 1.331, 1.484, 1.682, 1.933,
2.459, 2.072, 1.789, 1.594, 1.441, 1.331, 1.261, 1.219, 1.199, 1.205, 1.232, 1.301, 1.414, 1.571, 1.773, 2.052,
2.645, 2.206, 1.928, 1.728, 1.559, 1.451, 1.352, 1.301, 1.282, 1.289, 1.319, 1.395, 1.519, 1.685, 1.904, 2.227
],
"sigma": 0.005,
"sigma_Cb": 0.005
},
"rpi.contrast":
{
"ce_enable": 1,
"gamma_curve":
[
0, 0, 1024, 5040, 2048, 9338, 3072, 12356, 4096, 15312, 5120, 18051, 6144, 20790, 7168, 23193,
8192, 25744, 9216, 27942, 10240, 30035, 11264, 32005, 12288, 33975, 13312, 35815, 14336, 37600, 15360, 39168,
16384, 40642, 18432, 43379, 20480, 45749, 22528, 47753, 24576, 49621, 26624, 51253, 28672, 52698, 30720, 53796,
32768, 54876, 36864, 57012, 40960, 58656, 45056, 59954, 49152, 61183, 53248, 62355, 57344, 63419, 61440, 64476,
65535, 65535
]
},
"rpi.sharpen":
{
},
"rpi.ccm":
{
"ccms":
[
{
"ct": 3900, "ccm":
[
1.54659, -0.17707, -0.36953, -0.51471, 1.72733, -0.21262, 0.06667, -0.92279, 1.85612
]
}
]
},
"rpi.focus":
{
}
}
+1
View File
@@ -2,6 +2,7 @@
conf_files = files([
'imx219.json',
'imx290.json',
'imx477.json',
'ov5647.json',
'uncalibrated.json',