For saved networks that do not have a MAC address available in their
WifiConfiguration such as Passpoint networks, the MAC address will
be the default value of 20:00:00:00:00:00. In this case, display
"Not Available" as the summary of the MAC address preference.
Bug: 137282522
Test: atest WifiDetailPreferenceControllerTest &&
manual - open saved passpoint network details while disconnected
but in range and observe MAC address preference.
Change-Id: Ie9010b0430726de8105852ae2afe10047dcc3676
When active cellular internet is switched to CBRS in DSDS case,
default data sub id may not be changed. Fix by using active
subscription id and pass this sub id to entitlement app.
Bug: 134994718
Test: atest TetherServiceTest
Test: manual test with carrer SIMs.
Change-Id: I30a1d70c0690f0dba8f4171a2bde884f9b7ccfc4
On the SIM details page, the preference leading to a page for
configuring wifi calling will appear based on the results of the
MobileNetworkUtils#isWifiCallingEnabled helper function. That helper
uses the ImsManager to check several conditions, among them both
isWfcEnabledByPlatform and isWfcProvisionedOnDevice.
The page for configuring wifi calling has a tabbed UX, with one tab for
each active subscription that supports it. The WifiCallingSettings class
gets a list of the active subscriptions to determine which tabs to show,
and removes any that don't support wifi calling, but was only using the
isWfcEnabledByPlatform test to do so. This is a problem because the code
for showing the contents inside the tab, in WifiCallingSettingsForSub,
includes a sanity check of isWfcProvisionedOnDevice and calls finish()
if that returns false.
What this meant in practice is that if you happened to have 2
subscriptions where one returns true for both isWfcEnabledByPlatform and
isWfcProvisionedOnDevice, but the other only returned true for
isWfcEnabledByPlatform, then you'd never be able to succesfully use the
wifi calling page at all because the tab for the subscription you
*aren't* trying to configure would always call finish() early.
The right long term solution to this problem is probably to remove the
tabbed UX entirely from this page, since we probably don't need it given
the overall new multi-SIM UX. But there may still be legacy uses and
that is likely a bigger change than we want to make right now.
As a stopgap, this CL just adds a check of isWfcProvisionedOnDevice to
the code for filtering out ineligible subscriptions from the tabbed
interface, which we should have always had anyway.
Fixes: 135591718
Test: make RunSettingsRoboTests
Change-Id: I656c3d3fb30cb6fabcb86685eae38c5f0cd0c6f2
After a user uses Wi-Fi QR code scanner to scan a QR code of an unreachable
Wi-Fi network, the scanner does not recognize any QR code until the scanner is
restarted or back from a screen off state.
To restart QrCamera after a Wi-Fi QR code recognition, we should stop it before
start, otherwise the DecodeTask will not work.
Bug: 135225856
Test: Scan a Wi-Fi QR code of unreachable Wi-Fi network and
scan a Wi-Fi QR code of reachable Wi-Fi network, check
if the scanner recognizes QR code.
Change-Id: I0063c867d8e4046f184d02134bda842887c003a1
This change shows buttons of QR code scnanner and QR code generator
for a connected Wi-Fi network.
Bug: 134706055
Test: Generate QR code for a WPA2/WPA3 personal transition mode Wi-Fi AP
and check if the security type is WPA2 personal.
Generate QR code for open network.
Generate QR code for OWE network.
Scan a QR code of open network, verify connection.
Scan a QR code of OWE network, verify connection.
Scan a QR code of WPA3 network, verify connection.
Scan a QR code of WPA3 network, verify transition mode connection.
Change-Id: I60f2c38585f85745f992fa63a5ea85312f08c5e5
If the user exits the no Internet or partial connectivity dialog
without taking any action, there is no longer any way to use the
network. So, disconnect the network.
Bug: 130766237
Test: clicking outside dialog disconnects network
Test: orientation changes do not disconnect network
Change-Id: I80c2c98c994dc01e53b32f40332b3f1bd03b6012
1. Should only set picture size from the list of supported picture sizes.
To choose the best picture size, we should keep ratio as preview size to
avoid image distortion and QR code scan failure.
2. When Camera#setOneShotPreviewCallback callbacks, the image data is of
preview size, not picture size.
Bug: 132866467
Test: QrCameraTest
manual
Change-Id: I087e5fcdf064f111e915e0872b50ca5a45ff1d26
ZXing generate QR code with default encoding ISO-8859-1,
the generated QR code is wrong encoded if there is a
character outside of the charset.
Generate QR code of UTF-8 encoding.
Bug: 131851854
Test: manual
Change-Id: I96a5e72a978c654b62d89b3b11dd3016bf0ee1df
If we didn't set view and lifecycle for EntityHeaderController,
it only sets "z-order" as 0 for action bar.
So, user sees overlapped problem while user is scrolling view.
For now, we set view and lifecycle as parameter for EntityHeaderController,
then EntityHeaderController can change "z-order" while scrolling view.
Test: visual and robo test
Fixes: 133380109
Change-Id: I0445c6aeaa42d798374d2c712e9611a09a6b55e7
Support OWE in transition mode for devices with OWE support
and devices without OWE support. Scan results will return a
new type of network for OWE in transition networks on devices
that support OWE, and Open for devices that don't support OWE.
Handle the case where Open network is manually added to a device
that supports OWE.
Bug: 132139642
Test: Device with OWE: Connect to Open, OWE-Transition, OWE networks
Test: Device without OWE: Connect to Open, OWE-Transition
Test: Manually create Open network, connect to OWE-Transition
Change-Id: I1a584ccbfec8507803c527ea13933cff6f699ccb
The feature failed after the CL "Force the adapter to rebind cards with
a toggle".
Because toggle slices have been forced to rebind after starting another
activity and when any slice is updating. This unpins Wi-Fi slice and
stops WifiScanWorker and then clears the saved clicked network.
Solution:
1. Change ConnectToWifiHandler from activity to receiver and send
broadcasts to it with FLAG_RECEIVER_FOREGROUND, so Wi-Fi slice won't
be forced to rebind.
2. Seperate Wi-Fi scan worker and contextual Wi-Fi scan worker. Keep the
original logic for the generic one, and then add the logic below to
the contextual one.
3. Do not clear the saved clicked network when slice is unppined because
it happens frequently in contextual homepage.
4. Introduce a static long in ContextualWifiScanWorker that updates once
in every visible UI session. A session is when the screen is visible
to user.
5. Use session token to determine whether auto-starting captive portal
is needed.
Fixes: 128056349
Test: robotest, visual in homepage and network panel
Change-Id: I9e03c379806e124fa7253b2a635574b2433f6afc
Fix two reported issues regarding PSK-SAE transition mode:
1. When phone supports SAE, creating a manual saved network with PSK
and manually connecting would cause the phone to connect but Settings
does not display any connected AP. Phone would not autoconnect.
2. When phone doesn't support SAE, phone cannot connect to an AP in
PSK-SAE Transition mode because the framework always targets the highest
security.
Bug: 132278271
Test: Connect to WPA2 network
Test: Connect to WPA3 network (w/capable phone)
Test: Connect to WPA2/3 Transition w/SAE capable phone
Test: Connect to WPA2/3 Transition w/SAE not-capable phone
Change-Id: I371bcb4b2cccfc8684ecb5db3a768524f7354598
We should make sure both 'Use location' & 'Wi-Fi scanning' are enabled
before calling setWifiWakeupEnabled.
Bug: 131777439
Test: manual
Change-Id: I602917cfa7c5581ecb414e8c44b4e20c8f9ea78d
When clicking back button, pop fragment and Finish the activity if there is nothing to pop
Bug: 132132756
Test: atest WifiDppConfiguratorActivityTest
Change-Id: Ia16951e79e578f1625e5fadd26553735fa90bffa
With change ag/7340724, the device's P2P MAC adress will no longer be
included as part of the WIFI_P2P_THIS_DEVICE_CHANGED_ACTION broadcast.
This change makes WifiP2pSettings request the device info after
receiving that broadcast, to make it aware of the device's MAC.
Bug: 132055766
Test: atest
/media/sdb1/android/packages/apps/Settings/tests/robotests/src/com/android/settings/wifi/p2p/
Test: Open Wi-Fi Direct settings, clear device name, observe that the
device's MAC is displayed.
Change-Id: I524afb0c8061c90cd775af422b542213cf14640a
- Sync the Wi-Fi slice items subtexts with Wi-Fi page, and add
"Not connected" when the returned subtext is empty
- Wi-Fi slice header subtext just simply reveals on/off state
- Add a placeholder to the loading row to sync its height with other
rows
- Show contextual Wi-Fi slice when the connected network is captive
portal, is invalidated, or has limited connectivity
Bug: 130751985
Test: make RunSettingsRoboTests -j ROBOTEST_FILTER=com.android.settings.wifi
Change-Id: I0b2715295f00edc8dd7d6d75b7fdc18263675797
When clicking modify menu option in detiails page, modification on
metered or privacy preferences in the WifiDialog does not effect
back to details page but only changing internal data of WifiDialog.
Adding callback to update those two preferences.
Bug: 130775713
Test: make RunSettingsRoboTests -j32 ROBOTEST_FILTER=com.android.settings.wifi.details.WifiDetailPreferenceControllerTest
Change-Id: I74bfa5a9581dfae73894c3e9f73d1069a36fd16b
To improve UX, show summary as "Disconnected" is more make sense to end
user instead of "Saved" in detail page, it's decision-maker to click
connect button.
Bug: 131119614
Test: manual test
Test: make RunSettingsRoboTests -j32 ROBOTEST_FILTER=com.android.settings.wifi.details.WifiDetailPreferenceControllerTest
Change-Id: I26ea0c566daab6214a596509f972005fd37fab4d
If user click connect button and then receive timeout event after leave
detail page, the NPE happened. Ignore the timeout event if activity
already gone.
Bug: 131141866
Test: manual test
Test: make RunSettingsRoboTests -j32 ROBOTEST_FILTER=com.android.settings.wifi.details.WifiDetailPreferenceControllerTest
Change-Id: Ic22c22027386d4a6de5d693eafcd9cd463ed3415
Save the SSID when the user clicks the network, and then automatically
start login page when the network gets the captive portal capability.
Fixes: 128056349
Test: make RunSettingsRoboTests -j ROBOTEST_FILTER=com.android.settings.wifi
Change-Id: Ia25241a8243d7d6aae604f341b512350404d9fd1
Changing MAC randomized setting will disconnect and reconnect Wi-Fi in
the background automatically. UI display as disconnect even AP
reconnected. Fix this problem and also remove some obsolete code.
Another problem is connect button display as disabled with
"Connecting..." wording after user click connect then change the MAC
randomized setting.
Bug: 130370187
Test: Manual test with test case in go/wifi_connnection_btn_design
Test: make RunSettingsRoboTests -j32 ROBOTEST_FILTER=com.android.settings.wifi.details.WifiDetailPreferenceControllerTest
Change-Id: Id87c3db0cc785a9ceb3a71c7cbb78ffd87ffb0a1
1) Correct improper function comment about forget menu
2) Extends char limit of wifi_scan_always_turn_on_message_unknown for
translation.
3) Correct string comment on Saved networks summary
Bug: 130628569
Test: make RunSettingsRoboTests -j32 ROBOTEST_FILTER=com.android.settings.wifi.WifiSettingsTest
Change-Id: I0e60e4f205c794367dfffc032cb4334dac4d1cdd
// ACTION: Share a Wi-Fi network by generating a QR code
ACTION_SETTINGS_SHARE_WIFI_QR_CODE
// ACTION: Connect to a Wi-Fi network by scanning a QR code
ACTION_SETTINGS_ENROLL_WIFI_QR_CODE
// ACTION: Share Wi-Fi hotspot by generating a QR code
ACTION_SETTINGS_SHARE_WIFI_HOTSPOT_QR_CODE
Bug: 130521826
Test: manual
Change-Id: I4204307dd5318eb7c47e4136dc7d8700d43e4da1
