Before this change, users are not able to choose SIM
card for SIM dependent EAP methods when a device supports
multi-SIM.
This change support to choose a SIM when adding an EAP
Wi-Fi network. And this change support to show the related
SIM information on Wi-Fi detail screen.
Bug: 142792009
Test: make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.WifiConfigController2Test
make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.details2.WifiDetailPreferenceController2Test
Manually add an EAP Wi-Fi network of EAP-SIM type, observe the
value in Wi-Fi detail screen.
Change-Id: I2910931166dc6541897663857c46abcc1b3115fa
Bug: 152571756
Test: make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi
make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.dpp
make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.details
Change-Id: I857cf0e261c1b07c3d7b6bc08632880ed8c71ee1
Use WifiTrackerLib, we can use WifiEntry.getPrivacy()
to get the value for a Passpoint network.
Bug: 159672621
Test: manual visual
Switch Privacy setting in Wi-Fi detail page, observe
MAC address title.
Change-Id: I5411e727c5f48dc0d65a05706194569ca3bbebdc
WifiEntry.canConnect() may be true even if isExpired() is true, such as
in the case of connecting to renew a subscription. Thus, the
connect/disconnect button should only rely on canConnect() and
canDisconnect() (as well as the intermediate state of connecting) to
determine its visibility.
Bug: 150384136
Test: manually install expired passpoint profile and verify if the
connect button is visible and working.
Change-Id: Ibfdf285f3b97fd0de88804d4658df20bd67bf8e0
If a SIM based Wi-Fi network is not provided with IMSI
protection, Wi-Fi detail UI shows the warning summary if
the Wi-Fi network is connected.
Bug: 148283447
Test: make RunSettingsRoboTests ROBOTEST_FILTER=WifiSecondSummaryController2Test
make RunSettingsRoboTests ROBOTEST_FILTER=LinkifySummaryPreferenceTest
Change-Id: I689a75d2f0a2ae6196b2ed5985b8ff141fbac8b4
* Update isNetworkLockedDown in WifiUtils
to check the profile owner if the device
is an organization-owned managed profile
device.
* Update the logic to check if a Wi-Fi
network can be forgotten (for both the
device owner and profile owner of an
organization-owned device).
Bug: 150197944
Bug: 153605361
Test: manual testing
make RunSettingsRoboTests -j ROBOTEST_FILTER=WifiDetailPreferenceController2Test
make RunSettingsRoboTests -j ROBOTEST_FILTER=WifiUtilsTest
Manual Testing Steps
A. Provision TestDPC in 'Device Owner' mode.
- Create a Wi-Fi config in TestDPC.
- Enable 'DO created Wi-Fi configs are
modifiable only by DO'.
- Go to Settings and verify that the network
created cannot be modified and the 'Forget'
button is not displayed.
B. Provision TestDPC in 'Profile Owner of an
organization-owned managed profile' mode.
- Create a Wi-Fi config in the work profile
instance of TestDPC.
- Enable 'DO created Wi-Fi configs are
modifiable only by DO'.
- Go to Settings and verify that the network
created cannot be modified and the 'Forget'
button is not displayed.
C. Provision CtsVerifier in 'Device Owner' mode.
- Go to 'Device owner tests' > 'Wifi
configuration lockdown'.
- Create a Wi-Fi config then follow the
instructions.
Change-Id: Ie3c71113441a3aca62563310ad0e53d89fa04226
Allow changing the privacy setting for Passpoint networks, which are
considered subscriptions but not saved networks. Also use getSsid() for
the SSID pref.
Bug: 70983952
Test: manual build and visual verification
Change-Id: I8a4309421b28bccaf2bd62a23dca8cef133d5af1
Some tests are removed because WifiTracerLib listens to most intents
and callbacks to Settings APP, most of the receiving intent tests are
removed.
Bug: 151696220
Test: make RunSettingsRoboTests ROBOTEST_FILTER=WifiDetailPreferenceController2Test
Change-Id: Id88a5c9276457e329840e72711bd06e51a03dd1f
Use WifiManager#isStaApConcurrencySupported() to check if a
device supports STA+AP and shows the footer information.
Bug: 121328949
Test: make RunSettingsRoboTests ROBOTEST_FILTER=TetherSettingsTest
make RunSettingsRoboTests ROBOTEST_FILTER=WifiTetherFooterPreferenceControllerTest
Change-Id: I3446abb5cc9cdf76da8d17f5de31bd65715c165c
Make sure the tx link speed preference in the Network Details page
disappears when the network is disconnected.
Bug: 151126855
Test: manually going to network details page and disconnecting and
verifying that the link speed disappears.
Change-Id: I3dfd66085db987535c201d38961e4bca709752c9
Issue: The preference UIs status didn't chage dynamically.
Solution: update the preference UI status when onUpdated is called.
Bug: 146669261
Test: 1.manually mofidy framework to test.
2.The getAvailabilityStatus() already tested in
WifiSubscriptionDetailPreferenceController2Test.
Change-Id: I51b5e67df7998d7d3e9ede9ead7aa49ad574c7a3
Issue: Openroaming detail page have new UI Mock.
Solution: Apply the mock design to rollback previous UI and add one Subcription preference.
Bug: 146669261
Test: manually push API and check.
Change-Id: Ie3243c9bcd371db1909834ef257c741454abec11
Issue: Openroaming should have a specific detail page.
Solution: Apply the mock design to only reserve two preference items:
1.Auto-connect
2.Scription details
Bug: 146669261
Test: Add unit test case to test the new controller: WifiSubscriptionDetailPreferenceController2
Change-Id: Iba96500062f412f4cdcd1c8248544657770ab231
Session expiration time and venue webpage can be obtained through the
captive portal API.
Test: make RunSettingsRoboTests \
ROBOTEST_FILTER=WifiDetailPreferenceController2Test
(Since WifiDetailPreferenceController2Test is ignore now,
there is no test will be run in
WifiDetailPreferenceController2Test)
Bug: 139269711
Change-Id: I80b93689539c6ba5edafa3d0029376deca7ac1f7
For these features:
1. No user certificate for WPA-Enterprise 192-bit
2. Apps to add saved networks
3. Disconnect network
Bug: 149070448
Bug: 149069854
Bug: 148281247
Test: manual visual
Change-Id: I8ad9741446c93bd75142c612c6ca67a57f2cf9e2
If the passpoint is connected and expired, we still show
Disconnect button.
Bug: 148317997
Test: manual
Observe a connected passpoint and see Disconnect button.
Observe a disconnect passpoint and see no Connect button.
Should add test case in WifiDetailPreferenceController2Test
at later CL.
Change-Id: I07f22804eccce80c44ac709412cb594faaf6ccb0
Connect button becomes Disconnect button if the Wi-Fi AP
is connected.
Bug: 135891885
Test: make RunSettingsRoboTests -j ROBOTEST_FILTER=WifiDetailPreferenceController2Test
Change-Id: I0e0d485385294658170da3d37bc1cc1f8748468f
The Connect button in the Network Details Page should be synced to the
connected state of WifiEntry and should toggle between not visible,
"Connect", and "Connecting..." accordingly.
Bug: 70983952
Test: manual - connect to in-range saved network through Network Details
page
Change-Id: Id34a840dd81fb99c8e64ad219b0b7af73946c1bf
This change also remove redundant code of WifiNetworkDetailsFragment2
from WifiSettings.
Bug: 143326832
Test: Manual
Click connected Wi-Fi network and check the UI of
WifiNetworkDetailsFragment2
Change-Id: Id72c26116177f8e7063e433a6456557bd36c7927
There are still many methods not implemented in WifiEntry. This change has below workarounds:
1. Add WifiEntryShell to provide dummy WifiEntry methods.
2. Add @Ignore to WifiDetailPreferenceController2Test.
Must remove these workarounds after we have more constructed WifiEntry methods.
Bug: 143326832
Test: make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.details2
make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi.savedaccesspoints2
make RunSettingsRoboTests ROBOTEST_FILTER=com.android.settings.wifi
Change-Id: Ic2edb424b9c645838558fe131991ccb9105dc64c
Create below version 2 files for WifiTracker2 development, we can
check the feature flag only a few times and easily remove version 1
files in the future.
src/com/android/settings/wifi/details2/
src/com/android/settings/wifi/savedaccesspoints2/
tests/robotests/src/com/android/settings/wifi/details2/
tests/robotests/src/com/android/settings/wifi/savedaccesspoints2/
Bug: 143326832
Test: make RunSettingsRoboTests -j ROBOTEST_FILTER=com.android.settings.wifi.details2
make RunSettingsRoboTests -j ROBOTEST_FILTER=com.android.settings.wifi.savedaccesspoints2
Change-Id: I4d2caf1ce313871605252395764b02747240f217
