-To set highest priority when codec modification comes from development setting
Bug: 165442632
Test: make -j42 RunSettingsRoboTests
Change-Id: I8cfbaa276f3b3e269f4a80e8aae987fbb90f646e
When users open volume panel and keep on changing the volume slider for
a while, the panel starts to defer the slider updating, and finally gets
stuck and causes an ANR.
Root cause:
Volume panel has four volume adjusting slices. Each of them registers
a broadcast receiver to listen to the volume changed and muted events.
However, when the media volume changes, AudioManager will send four
broadcasts (music, assistant, accessibility, tts) to every receiver, and
each of them will reload slice four times. Thus, one media volume
changed event will lead to 16 (4*4) UI updates. Consequently, keeping on
sliding the volume bar will trigger hundreds of broadcasts and UI
updates, which makes the system busy and getting stuck.
Solution:
Introduce a VolumeSliceHelper to integrate the broadcasts of the volume
slices specifically.
1. Only register one broadcast receiver to reduce the broadcast loading
since the four slices are listening to the same signal.
2. Filter the only one eligible broadcast among the multiple concurrent
ones, and then relay it to the registered slice.
3. Listen to one more action STREAM_DEVICES_CHANGED_ACTION to update the
volume panel when audio output device changes.
Test: robotest, visual
Fixes: 144134209
Fixes: 160489394
Change-Id: I780b9eee35802b19a5f0ab0a7d07bd3e081f5556
Merged-In: I780b9eee35802b19a5f0ab0a7d07bd3e081f5556
(cherry picked from commit 2c7b77dad7)
Re-launching volume panel continuously will trigger an endless panel
loading, show a transparent unfinished UI, and then block the user's
screen.
Root cause:
When the activity receives a new intent from user's clicking, it will
call PanelFragment#createPanelContent to update the current fragment.
The method triggers an animation and then loads the panel content. If
multiple invocations run concurrently before the animation or the
loading finish, the loader's countdown latch will be increased
abnormally and lead to the endless loading.
Solution:
1. Since the invocations are in UI thread, simply add a flag to avoid
reentrance when the panel is animating or loading.
2. Filter out the same panel's creation request when the panel is still
visible.
3. Do not force a panel's recreation when it's under construction.
Fixes: 143889510
Fixes: 160491854
Test: robotest, manual
Change-Id: I821faedeb62354929f3af9804cbbe44ee5bb8a53
Merged-In: I821faedeb62354929f3af9804cbbe44ee5bb8a53
(cherry picked from commit 6a8d2c5e55)
- This CL uses new CachedBluetoothDevice callback instance
in construct to avoid unregister wrong callback.
- This CL uses flag to make sure preference will register callback
on onAttached() when preference remove callback on
onPrepareForRemoval() or onDetached().
- Update test case
Bug: 168682778
Bug: 157653997
Test: make -j42 RunSettingsRoboTests
Change-Id: I7a0d9f5332153ee80634e191847b84cd7c380b7d
Merged-In: I7a0d9f5332153ee80634e191847b84cd7c380b7d
(cherry picked from commit cafeab2813)
- Before this CL, the output switch panel will show a default
icon if there is no media session or album art.
This CL will hide the icon if there is no media session
or album art.
- Add test case
Bug: 161495909
Test: make -j42 RunSettingsRoboTests
Change-Id: I5f80158b12f89c8499fb97d0b203ebeffefbc18b
Merged-In: I5f80158b12f89c8499fb97d0b203ebeffefbc18b
(cherry picked from commit 30805af9de)
Revert submission 12392268-cherrypick-mediaappsettings-5fxuo164a2
Bug: 161813143
Reason for revert: no longer want change in QPR
Reverted Changes:
Id3de52419:Allow user to block individual apps from resuming....
I8c85bc937:Allow user to block individual apps from resuming
Change-Id: Ieacef217587476532246b466d680219351bc1657
1. Use AndroidJunit4 instead of RobolectricTestRunner
2. Use ApplicationProvider instead of RuntimeEnvironment to get context
Bug: 162048313
Test: atest -c MobileDataEnabledListenerTest
Merged-In: I81b3d6ac075666a45649c8d811832a40bdb1b41b
Change-Id: I34687eb69ef62cd3b6ea6519cee608a7b95f242b
Monitor Bluetooth Tethering state and update preference when there is
Bluetooth tethering state change.
Add test case to verify when recieve
BluetoothPan.TETHERING_STATE_CHANGED will update bluetooth state
Bug: 138688805
Test: make RunSettingsRoboTests
Merged-Id: I8f468d1d99ed6d87f6cd8305ef56b0d7a5dec95b
Change-Id: I8f468d1d99ed6d87f6cd8305ef56b0d7a5dec95b
- This CL before, "Previously connected device" didn't
handle dock device. If user have disconnected dock
device will cause Settings crash.
This CL add condition to handle dock device to avoid crash.
- Update test case.
Bug: 157653997
Bug: 167054620
Test: make -j42 RunSettingsRoboTests
Change-Id: I769cee3f589e14a993b00a0ae6ec3ddfba8ef281
Merged-In: I769cee3f589e14a993b00a0ae6ec3ddfba8ef281
- This CL before, previously connected devices will show most
recently connected devices and the maximum is 3.
In this time, if next most recently connected device is disconnected.
It's will not show on "previously connected devices", user needs go to
"see all" page to found that device.
This CL add rule to compare the priority of most recently connected
device. If priority of next disconnected device is higher than
currnect devices that on "previously connected devices".
Let next disconnected device show on "previously connected devices".
- Update test case.
Bug: 157653997
Test: make -j42 RunSettingsRoboTests
Change-Id: I684501a20a67755b2196ba9d4b5565add01a5d01
Merged-In: I684501a20a67755b2196ba9d4b5565add01a5d01
- This CL before, Bluetooth settings will hide the "see all"
option when bluetooth is off. For the UX improvement, this
CL will show the "see all" button when bluetooth is off. And
turn on the BT when user press "see all" button to let user to
quick pair their disconnected devices.
- Update and add test case
Bug: 147150367
Test: make -j42 RunSettingsRoboTests
Change-Id: I7a1451a36a31253b6be2203341bea4e59fed7c2b
Merged-In: I7a1451a36a31253b6be2203341bea4e59fed7c2b
(cherry picked from commit bde100849e)
android_robolectric_test is having some implicit deps removed
from it, so add in what we depend on directly.
Bug: 157451444
Bug: 161767237
Bug: 167568930
Test: m RunSettingsRoboTests
Exempt-From-Owner-Approval: Cherry-pick
Merged-In: I847cbeaab7aab6e3cb109df7cafd8a63d63c6acb
Change-Id: I847cbeaab7aab6e3cb109df7cafd8a63d63c6acb
-Add connected devices in "Previously connected" page
-Set active when clicking a connected device
Bug: 147150246
Test: make -j50 RunSettingsRoboTests
Change-Id: I4422cd63c360a4387cedc4f80f34474b42f82a1f
(cherry picked from commit 9743fed57d)
This change shows Pie+x Wi-Fi icon in Wi-Fi Details for a connected Wi-Fi
network which is not the default network when
1. It's connection speed quality is bad.
or
2. It has certain internet connection problem.
Bug: 163627176
Test: make RunSettingsRoboTests ROBOTEST_FILTER=WifiDetailPreferenceController2Test
manual visual
Change-Id: I1f102471426a55c7dabd9110afba20f802abedbe
'Adaptive connectivity' toggle button controls whether
network connection is automatically managed.
Bug: 162871294
Test: make RunSettingsRoboTests
manual
Switch the toggle button and reboot device, observe
if the state is retained.
Change-Id: I4499a3639abab356e8faa6316bfa45541efd63ac
Merged-In: I4499a3639abab356e8faa6316bfa45541efd63ac
