When AP config is changed, setting of "TurnOff hotspot automatically"
will be reset to default. Hence keep the setting when AP config changed.
Keep setting of whether auto shut down is enabled when AP
config changed.
Co-authored-by: Fangxiao Cao <fangxiao.x.cao@sony.com>
Test: manual test
Bug: 235370570
Change-Id: Ibd3d59b6a86edaf1253a2c9b035576e60a7beb96
* changes:
[MEP] Modify the comments
Unable to enable the removable esim
Reuse the active esim slot
stop show preferred SIM card dialog during sim switch
When the user enable the removable esim, the settings select wrong
slot(esim slot). The slot shold be the removable + esim slot and the
UiccCardInfo's cardId is the same as the removable esim's cardId.
Bug: 233170453
Bug: 233338345
Test: atest UiccSlotUtilTest
Change-Id: Ibd324b781c84318c994e3742bb82e1d1393b94e4
Merged-In: Ibd324b781c84318c994e3742bb82e1d1393b94e4
If there is the active esim slot in SS mode, the settings should
reuse it and does not change the sim slot mapping.
Bug: 229803628
Test: manually test.
Change-Id: I6daa38f54abfaf67c7640d9dc8be0da02eb59554
Merged-In: I6daa38f54abfaf67c7640d9dc8be0da02eb59554
* changes:
Grey out LE audio offload switcher as LE audio isn't enabled/supported
Unify the LE audio string and refine the layout to put LE audio switch together
Add LE Audio feature switcher in the developer option menu
Add a switcher to enable/disable LE audio feature. The switcher could be
enabled by setprop ro.bluetooth.leaudio_offload.supported=true
screenshot: https://screenshot.googleplex.com/6aGP664S9PX5EMS
Bug: 233018305
Bug: 233005340
Test: make RunSettingsRoboTests ROBOTEST_FILTER=BluetoothLeAudioPreferenceControllerTest
Test: switch LE audio feature, and check LE audio functionality status
Change-Id: I8adcf27edd1438df445d32fca93f35ff5020a3b3
Revert the wrong logic for removale slot part at ag/18579901,
the removable slot can read the esim card.
Bug: 233338345
Test: atest UiccSlotUtilTest
Change-Id: Ic2ac6a5cc4d5846b8b1e2ca766348f239bb1b719
Merged-In: Ic2ac6a5cc4d5846b8b1e2ca766348f239bb1b719
The condition whether the slot is esim slot should use getIsEuicc
api since the esim may be removable.
Bug: 233338345
Test: atest UiccSlotUtilTest
Change-Id: I47dc068e57a0faa7f7ce85af7933a48caa2c93e4
Merged-In: I47dc068e57a0faa7f7ce85af7933a48caa2c93e4
Providers can be created before onCreate is called on the application.
Calling CardDatabaseHelper.getInstance() too early will cause
ContextualCardLoader to call getAppllicationContext before application
has been fully started.
Postpone calling CardDatabaseHelper.getInstance() until database is
accessed.
Test: Start device with sim card inserted and Pin enabled on sim.
Wait some time before entering sim pin. After entering pin, open
settings. Verify that settings does not crash.
Verify that there is no contentProvider exceptions from settings in log.
Bug: 154076590
Change-Id: Id0b6294ca2aeebdc71076299928c4dea5145ba33
The "phone calls" uses the Headset profile, not HFP profile. The ui
uses the wrong profile. It causes the "phone calls" is always enabled
when LE is enabled.
Bug: 231511825
Test: build pass
Change-Id: Ib507352107c0d825b8c7a9605713bc9083259fbd
Reland http://ag/2529020 because the over-translation issue should be
resolved now.
Modify various formatters to avoid using framework strings for
formatting file sizes.
Also update README instructions for running unit tests.
Bug: 36994779
Bug: 71580745
Bug: 217592956
Test: no new test failures from RunSettingsRoboTests
Test: manual opening the settings page.
Change-Id: Ic4689ab1b76622028004d05e69858228bdc441cf
aosp/2093046 cancels bonding unconditionally in onDestroy(), this
results in the user not being able to pair when the pair button is
pressed because onDestroy() is also called in that case.
Only cancel bonding if the user did not press the pair button.
Bug: 231554812
Test: Changed settings app is able to scan after dismissing the dialog
and is also able to pair when the pair button is pressed
Change-Id: I868af9b795f1bb0766656e4619bd06dc8028008a
For an inserted PUK-blocked SIM card we should not allow
to open lock settings. Add a check for SIM_STATE_PERM_DISABLED
and disable "SIM card lock".
Test: Insert a PUK blocked card and check SIM card lock
Bug: 230370597
Change-Id: I8b468cefe95fb8bd66ab91d6c4569ddb01473fbe
When pairing dialog is dismissed using the back gesture, we do not call
cancelBondProcess() for the remote device. Since bonding is not
cancelled and the dialog is dismissed, when the user tries to pair again
and scans for devices, nothing shows up. This is because in case of a
pending bond or pending SDP, the request to search for new devices is
queued.
The correct behavior is to cancel bonding if the pairing dialog is
dismissed using the back gesture. This is similar to what
happens when the pairing dialog is dismissed using the cancel button.
Bug: 231554812
Test: Changed settings app is able to scan after dismissing the dialog
Change-Id: Ia790e345be811be1b60762ff819544d03c5a18fd
Storage view is white and cannot show any info while plug in/out u disk because the visibility of list view is gone.
This visibility is set when StorageDashboardFragment.java sets loading using API setLoading.
In error condition setloading was not called due to conditional statement.
After removing the conditional statement, it sets loading through which visibility of the list view is set to VISIBLE.
1. Enter Settings->Storage
2. Plug in U-disk, storage view will start updating
3. During storage view updating, plug out U-disk(before phone recognized and show U-disk)
Fix:
Bug:
Test:
Change-Id: Id7350909b614bbe9264910cab3cdeca616544618
CR-Id:
Feature:
