Commit Graph

8662 Commits

Author SHA1 Message Date
Malcolm Chen
b3b52ce088 Merge "Replace isSubscriptionEnabled with isActiveSubId." into qt-dev
am: 0304f4d1ce

Change-Id: I3a78fe154d3861c779365d1e611ac8c559861a10
2019-06-18 20:29:39 -07:00
Matthew Fritze
1601d41f8a Merge "MobileData slice should be null if not-actionable" into qt-dev
am: e2ab7540a3

Change-Id: If562aec8635ab4d56ff5016eea5d19d2a96e2383
2019-06-18 20:23:30 -07:00
TreeHugger Robot
0304f4d1ce Merge "Replace isSubscriptionEnabled with isActiveSubId." into qt-dev 2019-06-19 03:11:25 +00:00
TreeHugger Robot
e2ab7540a3 Merge "MobileData slice should be null if not-actionable" into qt-dev 2019-06-19 02:26:20 +00:00
Malcolm Chen
dd0b2fc380 Replace isSubscriptionEnabled with isActiveSubId.
As we don't allow pSIM modem disablment, we should simply use isActiveSubId
to decide whether a subscription's preferences is changable. This will
avoid potential modem bugs that reports wrong modem status that result
in Setting's UX error.

Bug: 135222940
Test: manual and robo
Change-Id: I7cccf2fdab7c89d26dac4daad51cd5d6f3a90eba
2019-06-18 23:55:35 +00:00
Antony Sargent
ff1c4940c8 Merge "Use displayName instead of operator name in MMS data notification" into qt-dev
am: 40e9ffc2f0

Change-Id: Ie50c5041ef4b9df9ef015cd5f147b1c45956893f
2019-06-18 16:02:39 -07:00
Antony Sargent
40e9ffc2f0 Merge "Use displayName instead of operator name in MMS data notification" into qt-dev 2019-06-18 21:54:33 +00:00
Antony Sargent
37008824e6 Use displayName instead of operator name in MMS data notification
When the phone is in DSDS mode and the user tries to send an MMS message
from the SIM that isn't the default for data, we need to pop up a
notification letting them know that the action can't succeed unless they
turn on the advanced option to allow data use for MMS messages. This
notification was using the operator name instead of the subscription
display name, so it didn't reflect any renaming the user might have done
to keep track of their SIMs, which is obviously confusing especially if
they have two different SIMs for the same carrier. This CL switches to
using the subscription display name in this notification.

Fixes: 134771858
Test: make RunSettingsRoboTests
Change-Id: I6995bf9dd6d5e9544e26f0d8e30e97c4e73ab783
2019-06-18 21:54:22 +00:00
Matthew Fritze
63bc6a1090 MobileData slice should be null if not-actionable
In cases where MobileData should not be changed:
- Airplane mode
- No data subscriptions

we will return a null slice, rather than a slice with a no-op intent
attached as a primary action. The problem with the no-op intent is that
Slices assumes all actions are by definition, actionable, and the the
TalkBack description announces that the item is clickable, which it
really isn't.

We will in the future investigate disabled actions on Slices, but this
is the short-term fix.

Fixes: 132924748
Test: Robolectric
Test: Panel tester app
Change-Id: I1d62af32fe2dd985f0b52ea4188651e76f9c90ec
2019-06-18 14:53:21 -07:00
Bill Yi
23e86df342 Import translations. DO NOT MERGE
Auto-generated-cl: translation import

Bug: 64712476
Change-Id: Iac730b3d5c81a72cd072a25c203e67035fae3cf6
2019-06-18 06:25:01 -07:00
Ivan Podogov
72bb3cc1f6 Merge "Add "Your work policy info" entry in Privacy settings" into qt-dev
am: 9a1c75c57a

Change-Id: Idf96f32733b5a3aedab325cbeba4b67c1d20ce24
2019-06-17 05:49:13 -07:00
Ivan Podogov
9a1c75c57a Merge "Add "Your work policy info" entry in Privacy settings" into qt-dev 2019-06-17 12:39:10 +00:00
Mehdi Alizadeh
2fbd41a326 Show a dialog with a slider to set the back gesture's sensitivity
am: 7d43125964

Change-Id: I64cf3b8725efb8f8377e4f9dac545743066b2cbb
2019-06-14 17:11:54 -07:00
Mehdi Alizadeh
7d43125964 Show a dialog with a slider to set the back gesture's sensitivity
Bug: 131447780
Test: Manual test on device
Test: make RunSettingsRoboTests ROBOTEST_FILTER=RadioButtonPreferenceWithExtraWidgetTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=SystemNavigationGestureSettingsTest

Change-Id: I9fcd1a50c77689118857326de0cf8082e835b491
2019-06-14 23:40:11 +00:00
Lei Yu
192367bef2 Merge "Handle null intent in WifiCallingPreferenceController" into qt-dev
am: b4d94a8ccc

Change-Id: I82623904692cd6f9cdf1daf50b366c8a41f15804
2019-06-14 15:56:10 -07:00
Lei Yu
b4d94a8ccc Merge "Handle null intent in WifiCallingPreferenceController" into qt-dev 2019-06-14 22:38:59 +00:00
Ivan Podogov
75a10d1fd2 Add "Your work policy info" entry in Privacy settings
Bug: 132904820
Test: manual
Change-Id: Id706d450c3ad6a6a8c1e402d39d18e048cdb6519
2019-06-14 13:07:21 +01:00
Yiwei Zhang
16eef18cb8 Merge "Game Driver: Allow user to apply prerelease driver for all apps" into qt-dev
am: 4af74dd86d

Change-Id: I02f895a2c7b5a66dc71db0a60356d854c9123a82
2019-06-13 16:50:38 -07:00
Antony Sargent
edcd8e9ca5 Merge "Fix Calls/SMS default SIM selector" into qt-dev
am: 7af299c604

Change-Id: I588c6858b67101e03efff9235e96d799237135fe
2019-06-13 16:49:16 -07:00
TreeHugger Robot
4af74dd86d Merge "Game Driver: Allow user to apply prerelease driver for all apps" into qt-dev 2019-06-13 23:44:36 +00:00
TreeHugger Robot
7af299c604 Merge "Fix Calls/SMS default SIM selector" into qt-dev 2019-06-13 23:25:04 +00:00
Antony Sargent
22b827db55 Fix Calls/SMS default SIM selector
In cases where a SIM is initially disabled, even after you turn it on
the ListPreference's for selecting the default SIM for Calls and SMS
weren't working because the preference change listener wasn't getting
registered. This CL fixes that for these controllers by always
registering a change listener whenever we make the preference visible.

Fixes: 134472294
Bug: 135142209
Test: make RunSettingsRoboTests
Change-Id: Ia9362b7f26309bdbd6c5e8140fb606b28e2b34d8
2019-06-13 23:24:34 +00:00
Lei Yu
41bb2cb6a8 Handle null intent in WifiCallingPreferenceController
When intent is null, we will hide wifi calling preference however
its listener might still triggered with null intent.

This CL update controller so it can handle this event inside listener
callback.

Fixes: 135095929
Test: RunSettingsRoboTests
Change-Id: I4c5aba03871f11a2d9f9b4da329c2c2655ff9adb
2019-06-13 14:47:56 -07:00
Yiwei Zhang
687906f2f9 Game Driver: Allow user to apply prerelease driver for all apps
Currently the global opt-in is only available to Game Driver. This change has
added an option to let developers to opt-in all apps to use prerelease driver.
GameDriverEnableForAllAppsPreferenceController is then refactored from
SwitchPreference to ListPreference to support this change.

Bug: 134881329
Test: make RunSettingsRoboTests ROBOTEST_FILTER=GameDriver
Change-Id: I6dcb3a22a4033a576605d42aa80b09db088d4aa2
2019-06-13 12:21:49 -07:00
Yiwei Zhang
3b8681d8c6 Merge "Game Driver: Add UI support for prerelease Game Driver" into qt-dev
am: 0de0d5be39

Change-Id: Ib806945a955125febf2d7eb8c37e735c9e2ade0d
2019-06-13 08:46:47 -07:00
Yiwei Zhang
240760c570 Game Driver: Add UI support for prerelease Game Driver
Bug: 134881329
Test: make RunSettingsRoboTests ROBOTEST_FILTER=GameDriver
Change-Id: I9c710a5e6adff9b01c656d576f53f9b4b3360207
2019-06-12 18:09:36 -07:00
Antony Sargent
af8fa25cfd Merge "Remove on/off toggle for physical SIMs" into qt-dev
am: 5836158f2e

Change-Id: Idfe1855b09448feea3036185f092b3f56b10f18e
2019-06-11 13:13:52 -07:00
TreeHugger Robot
5836158f2e Merge "Remove on/off toggle for physical SIMs" into qt-dev 2019-06-11 20:06:54 +00:00
tmfang
1c474bf789 Fix overlapping problem on notification screen
am: 564fcb90ab

Change-Id: I22700badde84ab5a723b41d59fbd72a9f751452e
2019-06-11 10:45:44 -07:00
tmfang
564fcb90ab Fix overlapping problem on notification screen
If we didn't set view and lifecycle for EntityHeaderController,
it only sets "z-order" as 0 for action bar.

So, user sees overlapped problem while user is scrolling view.

For now, we set view and lifecycle as parameter for EntityHeaderController,
then EntityHeaderController can change "z-order" while scrolling view.

Test: visual, robotest
Fixes: 132819126
Change-Id: Ieb01b26e4d6ca4d82f72371620938665de8149a0
2019-06-11 13:57:57 +08:00
Antony Sargent
e548fc6334 Remove on/off toggle for physical SIMs
Our original design for mobile network subscription management included
having an on/off toggle for both eSIMs and physical SIMs. However, it
turns out that our current telephony stack has some problems with
disabling physical SIMs, so for now we're removing the on/off
toggle. Because of this, we've added a footer to the SIM details page
for physical SIMS letting users know that to disable them you need to
remove them from the device.

Even though we're removing the on/off toggle for pSIMs, there are still
a few edge cases where you could end up with a disabled one (eg having
two SIMs in single-SIM mode where the eSIM is active and then you erased
the eSIM). In order to have a way to re-enable the pSIM in these cases,
this CL changes the relevant pref's summary to "Tap to activate <name>"
and makes the tap action begin the re-enabling. This can affect either
the Mobile network pref on the Network & internet main page (if this
disabled pSIM is the only SIM), or an entry in the Mobile networks list
page (if there are still multiple SIMs present).

Finally, this also fixes a problem where we weren't showing the on/off
toggle for eSIMs if you only had one SIM total; we actually always want
to show it for eSIMs.

Bug: 132921553
Test: make RunSettingsRoboTests
Change-Id: Id0750ebd5bed46dc2450b65b53cc81847ef09b82
2019-06-10 14:41:08 -07:00
George Chang
dc6a11a82a Fix NFC state switched off every time user entered connection preferences page
am: e4c2e427a1

Change-Id: If4545377b7c6196027b89514a91a2b7068f1202b
2019-06-06 23:29:07 -07:00
George Chang
e4c2e427a1 Fix NFC state switched off every time user entered connection preferences page
NfcAirplaneModeObserver added a scenario that
switched NFC off every time  a user entered connection
preferences page if airplane mode was on.
Even when a user manually switched on NFC, the observer would still
turn NFC off when re-entering connection preferences page.

GSAM TS.27 certification requires NFC state to be consistent
under AirplaneMode before and after reboot the device.
NfcAirplaneModeObserver breaks the requirement
because it would always switch NFC off under airplane mode
when a user checked the NFC state in settings page.

Fix it by removing NfcAirplaneModeObserver.
Keep the NFC state consistent.


Bug:128384879
Test: make RunSettingsRoboTests / Check Nfc on/off Status
Merged-In: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
Change-Id: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
2019-06-07 00:11:32 +00:00
Julia Reynolds
520a48070f Merge "Silent notifs appear on lockscreen by default" into qt-dev
am: f58cd0fb51

Change-Id: I446708aba61c268375257280341a1ff5b33aa81d
2019-06-06 11:55:54 -07:00
Julia Reynolds
a1a598d44e Silent notifs appear on lockscreen by default
Test: atest
Bug: 134613164
Change-Id: I1ee39a1302010a2a29ba6d0060f19565e41859a2
2019-06-06 17:03:20 +00:00
Suprabh Shukla
4929001e70 Kill uid when REQUEST_INSTALL_PACKAGES is denied
am: 732edc3e39

Change-Id: Id88443ad3face92fa3d28622207c49f94c7eb002
2019-06-05 14:34:46 -07:00
Suprabh Shukla
732edc3e39 Kill uid when REQUEST_INSTALL_PACKAGES is denied
Process privileges like open fds need to be revoked, when this
permission is denied by the user.

Test: Manually verified by checking logs.
Robotest:
atest SettingsRoboTests:ExternalSourcesDetailsTest

Bug: 133504844
Change-Id: I81da0b3a5d6c54e392828829d1a2c43488439504
2019-06-05 21:15:17 +00:00
Xiangyu/Malcolm Chen
226715e54e Merge "Triggering notifications when dual CDMA SIM combinations are detected" into qt-dev
am: 13cbb2eea2

Change-Id: I8ba31e7278d911bf6cef19e46d06ed964ae9e36f
2019-06-05 11:21:33 -07:00
Xiangyu/Malcolm Chen
13cbb2eea2 Merge "Triggering notifications when dual CDMA SIM combinations are detected" into qt-dev 2019-06-05 18:03:17 +00:00
Malcolm Chen
57badc2a82 Triggering notifications when dual CDMA SIM combinations are detected
In Settings, catch the intent from Telephony about SIM combination
warning and show a notification about it.

Bug: 132631355
Test: manual - have two cdma capable subscriptions active, make sure
the notification is sent, and tapping on it leads to the helper page.

Change-Id: Ifd0e13781e4afc3bfd82415b3e51fd10176d9f9d
2019-06-04 17:11:09 -07:00
Alan Stokes
5b09f510e2 Merge "Cleanup background activity starts for release." into qt-dev
am: c53f5ecb3d

Change-Id: Icdfe52632085ea7add4ffa594fddb2d79b412e3b
2019-06-04 07:38:04 -07:00
Alan Stokes
c53f5ecb3d Merge "Cleanup background activity starts for release." into qt-dev 2019-06-04 14:26:29 +00:00
Antony Sargent
7f7f7cda18 Add a "data during calls" preference
am: aeb1da0db9

Change-Id: Ib33d13995f1c1c51bc0b17f109854a5e484f5741
2019-06-03 18:39:19 -07:00
Antony Sargent
aeb1da0db9 Add a "data during calls" preference
This adds a switch which appears on the SIM details page for any SIMs
that aren't the default on for data. It lets the user opt-in to turning
on data on this SIM only in the case where there is an active call -
this is needed because in some cases the default data SIM may not be
able to be used when a call is active on another SIM.

Bug: 132114205
Test: make RunSettingsRoboTests
Change-Id: Ie44c56e0f486fd93aff411a0ba0e47d3695a4941
2019-06-03 15:20:33 -07:00
Lei Yu
057dc8466a Merge "Use new API to build NetworkTemplate" into qt-dev
am: c9fbd2ee50

Change-Id: I7737bc0fd3321f13edf2e9440ee870d059817dc3
2019-06-03 10:03:30 -07:00
Lei Yu
c9fbd2ee50 Merge "Use new API to build NetworkTemplate" into qt-dev 2019-06-03 16:54:29 +00:00
Mehdi Alizadeh
9b378dd381 Merge "Disables the Gesture nav option if 3P launcher is default" into qt-dev
am: cad67cdc0a

Change-Id: Icba26f525b33f2a09a014fb88a4076362a289681
2019-05-31 14:30:18 -07:00
Mehdi Alizadeh
cad67cdc0a Merge "Disables the Gesture nav option if 3P launcher is default" into qt-dev 2019-05-31 21:08:08 +00:00
Mehdi Alizadeh
ffea2ae488 Disables the Gesture nav option if 3P launcher is default
Disables the Gesture navigation radio button if 3P launcher is set as
default for current user. Also shows an info icon on the right side that
opens a dialog explaining why it is disables.

Bug: 129532605
Test: Manual test with 3P launcher
Test: make RunSettingsRoboTests ROBOTEST_FILTER=RadioButtonPreferenceWithExtraWidgetTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=SystemNavigationGestureSettingsTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=SystemNavigationPreferenceControllerTest

Change-Id: I90000c74246699fa9391ac042c87d7f0ece03637
2019-05-31 12:26:28 -07:00
Lei Yu
fad8cec592 Merge "Fix issues in battery usage accounting" into qt-dev
am: 2148c1a207

Change-Id: Ia73d2e5ab630668b73a6dd6b69aa831a6262a80b
2019-05-31 10:41:54 -07:00