Test: Unit - atest SettingsRoboTests
Test: Manual - Set PIN lock and enabled/disabled the setting to observe animation change during PIN entry
Bug: b/204799468
Merged-In: I587b993ef5515a075442e82ebafae88bebdffc20
Change-Id: I587b993ef5515a075442e82ebafae88bebdffc20
The panel used to sit above the navigation bar. Now it extends down all
the way to the edge of the screen.
Bug: b/250484565
Test: make ROBOTEST_FILTER=SettingsPanelActivityTest RunSettingsRoboTests -j40
Test: Manual. When volume panel is opened, verify that it extends all
the way to the bottom of the window, instead of sitting on navigation
bar. Panel can be opened with:
adb shell am start -a android.settings.panel.action.VOLUME
Substitute VOLUME with NFC and WIFI for the other settings panels.
Change-Id: Ibae5d3602231e2309b5ff847c630a1f8c82ea355
Toggle will allow users to disable showing home controls over their
screensaver.
Bug: 271330583
Test: make -j64 RunSettingsRoboTests
Change-Id: I9600cdb85d85253c859c88f12c1d074e1082bf97
Test: Manual - Reset tablet without removing accounts, observe the texts
displayed correctly for tablet. Expanded related for devices.
Fixes: 267539281
Fixes: 270516438
Change-Id: If2ad3692b9fb2c8a374d8e988aac76a7254b8cd6
Test: Manual - Go to Fingerprint Settings and check the string
Bug: 258338293
Change-Id: Ia22fcd1289bec85642993b22fe3cb3ebaf647cbd
Merged-in: Ia22fcd1289bec85642993b22fe3cb3ebaf647cbd
Fix: 269717670
Test: 1. Go to Settings > Accessibility shortcuts > accessibility button & gesture.
2. Observe The Gesture's picture.
3. Go to any other accessibility's shortcut.
4. Observe the picture of the Use accessibility gesture. #2 should look like #4
Change-Id: I11f64648412c9795383d356e80d9dd499095f53b
Root cause: Portrait mode does not always respect the sw600dp qualifier and instead uses the phone (default) resources.
Solution: Using the product to customize the tablet and phone cases is better way than using the configuration qualifier.
Bug: 269130587
Test: Manual testing
Change-Id: I90cc44f1e9bccf8950a4d89f70119ba5e3c0bfdc
(cherry-pick of commit bea25c7513)
With volume_separate_notification flag enbaled, muting ring volume
slice will cause notification volume slice to gray out.
There used to be a bug in which notification slice would not get
updated in response to a change in ring volume mute/unmute broadcast.
The resulting erroneous behavior was notification slider would get to
zero but not get grayed out. To fix that bug, VolumeSliceHelper listens
to ring stream mute/unmute broadcasts and forwards them to notification
slice.
Bug: b/266072907
Test: make DEBUG_ROBOLECTRIC=1 ROBOTEST_FILTER="NotificationVolumePreferenceControllerTest|VolumeSliceHelperTest" RunSettingsRoboTests -j40
Change-Id: I2ab51f1272bf99a0c3d9ca285354052d00910c90
Since creating the seekbar for changing font size in SystemUI requires
the size of the value entry array and the values in the array.
Therefore, we move the related resource to SettingsLib to share the usage.
Bug: 242326166
Test: make RunSettingsRoboTests ROBOTEST_FILTER=FontSizeDataTest
Test: Maually test the availability of changing font size through
Settings page
Change-Id: Ia2621e3b4c71f900e6591644d0e3f93bedbe4ee8
Merged-In: If630bd9c9c27823c210410b53342b921a11bbfb9
Add a config config_display_network_mode_3g_option to hide the 3G
option at preferred network mode UI
Bug: 261615630
Test: build pass. local test pass.
atest EnabledNetworkModePreferenceControllerTest
Change-Id: I4f94971add1d1eddc9f7c7458b8fc8fdcec3935e
(cherry picked from commit f7685dd715)
Merged-In: I4f94971add1d1eddc9f7c7458b8fc8fdcec3935e
This will let users know which screensaver they are customizing.
Fixes: 267582102
Test: flashed device and enabled talkback, opened screensaver settings,
and verified talkback correctly says the name of the screensaver
Change-Id: I9d0d9422f06b7a78efca0e6953b73fe612f79e2a
Revert part of the layout change from b/233835795 fix so that
the issue of small tappable area in b/265859032 is fixed while
we continue to look at a better fix for b/233835795
Test: Manually change different Display & Font size to test UI
Test: m RunSettingsRoboTests ROBOTEST_FILTER="com.android.settings.biometrics.face.FaceEnrollEducationTest"
Bug: 265859032
Change-Id: I90ba7cc11dc61380dfdf0c3bcd2c59a17b43ee0e
Test: manual
1. adb shell settings put secure \
lock_screen_show_only_unseen_notifications <0|1>
2. Settings > Notifications > General > Show only new notifications on
lock screen
3. Toggle setting
Observe: if setting is enabled, seen notifications are filtered from
the lockscreen, and vice versa
Bug: 254647461
Change-Id: I4f6e35a1d918095cea25a97f72ddd08869ad9b31
Changed the string security_settings_sfps_enroll_find_sensor_message.
Changed the layout of the animation.
Test: Manually check the position of the animation
Fixes: 265023019
Change-Id: Iae3100009e4430fbff7abc4bc3c1d4b9ffca6638
Merged-In: Iae3100009e4430fbff7abc4bc3c1d4b9ffca6638
To extract face_enroll_education.xml layout dimensions to dimens.xml
1. Fix settings face enrollment UI truncate problem
2. Fix It's hard to tap "setup for limited vision or head motion"
button
Bug: 260653042
Bug: 263065347
Test: manually go to Settings > Security & privacy > Device lock >
Face & Fingerprint Unlock > Face Unlock, then start enroll Face,
In second stage ("How to set up Face Unlock" page ), check the layout
and lottie animation do not truncate.
Test: m -j SettingsGoogleRoboTests RunSettingsGoogleRoboTests
Test: m RunSettingsRoboTests ROBOTEST_FILTER=
"com.android.settings.biometrics.face.FaceEnrollEducationTest"
Test: m RunSettingsRoboTests ROBOTEST_FILTER=
"com.android.settings.biometrics.face.FaceEnrollIntroductionTest"
Change-Id: I7d7bad8b91dd505772e8f2b28cb4b872a4750cb4
* changes:
3-1/ Impl FoldProvider.FoldCallback for Face enroll activities
2-1/ Add config_suw_support_face_enroll to customize SUW face enroll flow
Fix face enroll introduction crash after 10mins
Test: Manually verified in settings that the performant auth
feature(fingerprint) is disabled by default
Bug: 261216422
Bug: 265031172
Change-Id: I6422b12f801d038fa514758eca34efcbfdeef27a
Changed the dialog title for error UNABLE_TO_PROCESS
Test: Manual (check the error dialog associated with the errMsgId)
Bug: 261886132
Change-Id: I86bf31d363625a3138676a64e7356c9fecb178d8
Create a mechanism to allow OEM config posture guidance with
'config_face_enroll_guidance_page', and customize the config
'config_face_enroll_supported_posture' with standard postures
0 : DEVICE_POSTURE_UNKNOWN
1 : DEVICE_POSTURE_CLOSED
2 : DEVICE_POSTURE_HALF_OPENED
3 : DEVICE_POSTURE_OPENED
4 : DEVICE_POSTURE_FLIPPED
For example, if we set 1 for the device, then device only
allow to enroll face in closed(folded) state, if device do
not in the allow state, we will prompt specific guidance
page activity defined in config_face_enroll_guidance_page.
At this stage , we only integrate 2 states OPENED/CLOSED through
ScreenSizeFoldProvider and register for onFoldUpdated() callback
- isFold(DEVICE_POSTURE_CLOSED): finish posture guidance
- !isFold(DEVICE_POSTURE_OPENED): launch posture guidance
- onActivityResult : reset mOnGuidanceShown false
1. Fix A11y lottie animation bug
2. Impl FoldProvider.FoldCallback
3. Register callback to ScreenSizeFoldProvider
4. Integrate back stack, skip, cancel events
- Back key : RESULT_CANCELED
- Skip btn : RESULT_SKIP
- Posture changed : RESULT_FINISHED
5. Set single instance for relative activities
6. FaceEnrollFoldPage listen for onConfigurationChanged()
7. Add empty face_posture_guidance_lottie.json for overlay
Test: atest SettingsGoogleUnitTests
Test: m -j SettingsGoogleRoboTests RunSettingsGoogleRoboTests
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollEducationTest"
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollIntroductionTest"
Test: Manual launch security settings face enroll, unfold device
and observe posture guidance showing fullscreen on top
Test: Fold device ensure the posture guidance activity finish
Bug: 261141826
Fixes: 231908496
Change-Id: Ib9f43f82f7d19f3f187c2f6f8984e76cd843afbc
Merged-In: Ib9f43f82f7d19f3f187c2f6f8984e76cd843afbc
1. Add config_suw_support_face_enroll default is TRUE
2. Impl FaceFeatureProvider to obtain the config
3. Overlay config_suw_support_face_enroll by requirements
Test: Flash build and manual check if device go through face enroll in SUW
Bug: 262469686
Change-Id: I61aa5c818bedfb490f2172a7481f59fda7295c1a
Merged-In: I61aa5c818bedfb490f2172a7481f59fda7295c1a
Since the SetupChooseLockPattern include header icon
header title, header sub-title, pattern state description,
LockPatternView and FooterBar, there was a limited room
for LockPatternView especially in the confirm steps which
both header title and pattern description occupy 2 lines space.
Hance the PatternView size used to inconsistence in-between
1st draw and 2nd confirm draw, besides it's visual looks
jumping and small on some device which have smaller display.
This solution includes 3 changes:
1. Organized the pattern view message to leverage
header sub-title view, then we can resever more space.
(Set minHeight=2 for sub-title)
2. Set screen_lock_options button visibilty to GONE when
the stage in 2nd confirmation.(Previously it's INVISIBLE
and reserve additional space)
3. Let LockPatternView align bottom of FrameLayout to prevent
the view juming and flicker.
4. Clean up unused forAnyBiometric flag and code.
5. GlifLayout.getDescriptionTextView() == mHeaderView
Need setDescriptionText() to make the view from GONE -> VISIBLE
6. Polish the stage flow and ensure IntroductionStage show
correct message
7. Add ChooseLockPattern into embeded activity white list
Force show ChooseLockPattern in fullscreen in case the Pattern
view truncated in `NeedToConfirmStage` where the title showing
2 lines and push pattern view down, and get bad UX in the
device which integrate a shorter display.
8. Add test cases for all stage and polish legacy test code.
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.SetupChooseLockPatternTest"
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.ChooseLockPatternTest"
Bug: 249974175
Bug: 260027850
Change-Id: I868af9b14ba99af5d78a05f6c2a570ccc07aea15
1. Set biometric_auth_pattern_view_size: 348dp (portrait)
2. Set resilience size 248dp~348dp for landscape mode
biometric_auth_pattern_view_(max_)size
3. Set 348dp size for sw410dp when display density < 560
Set 248dp-348dp resilience size for sw410dp-land
4. Add sw392dp sw392dp-land with density 440 projects
5. Set sw600dp/sw720dp/sw800dp for large screen device
6. Reference dimen biometric_auth_pattern_view_size in style
7. Remove redundant dup AuthCredentialPatternContainerStyle
8. Remove max & min bounds from AuthCredentialPatternContainerStyle
9. Remove unused choose_lockscreen_min_height dimen
10. Reduce footerText min hight to reserve more space for pattern view
Bug: 234847272
Bug: 243008023
Bug: 243699695
Test: manual
Test: m RunSettingsRoboTests -j30 ROBOTEST_FILTER=\
ChooseLockPatternTest
Test: m RunSettingsRoboTests -j30 ROBOTEST_FILTER=\
SetupChooseLockPatternTest
Change-Id: Icfc2932279aa9e3a065030dbb7ff73f12ed6d081
Merged-In: Icfc2932279aa9e3a065030dbb7ff73f12ed6d081
