Test: Verified in SUW that enrollment will skip after
tapping the cancel button in the Introduction.
Fixes: 140702414
Change-Id: I9d9da0ff6d10b6ee6929cb52ff4a03a684f43d17
(cherry picked from commit d98257bae6)
When mPackageName is null, mFinish is true. OnResume() doesn't
invoke refreshUI(). It causes uninstall button is still enabled.
The solution is hiding AppButtonsPreference when mFinish is true.
Fixes: 138524326
Test: make RunSettingsRoboTests ROBOTEST_FILTER
Change-Id: I9759e53f002afbd4c88d8d536df3bf01c343135e
(cherry picked from commit 88228c3399)
Hide preferred network mode UI no matter home, roaming or no service
when KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL been enabled.
Bug: 137681413
Test: atest PreferredNetworkModePreferenceControllerTest
atest EnabledNetworkModePreferenceControllerTest
Manual with AT&T SIM card in out of servce and in service
Change-Id: Ia0d1333c6cbae3a3717c8db6b77fbb9ea8cec968
Original behavior will map all APN type if enter empty APN type. But it
sometimes cause problem that MMS or IMS not working when select to this
custom APN. So if the user doesn't enter any APN type, just map to
valure of carrier config 'apn_settings_default_apn_types_string_array'
to avoid all the functions broken.
Bug: 129704611
Test: 1.Enter empty APN type and check if only default is added into
APN. 2.atest ApnEditorTest pass.
Change-Id: Icec274e5b402af06822479bcc60294b347f5254f
WifiTracker#getAccessPoints() only contains a hidden SSID Wi-Fi
network if it's a saved Wi-Fi network. We can't check if a hidden
SSID Wi-Fi network is reachable inadvance. That is the difference
after a user scanned a QR code of hidden SSID Wi-Fi network.
Bug: 135892509
Test: make RunSettingsRoboTests ROBOTEST_FILTER=WifiDppUtilsTest
manual test:
Click the Share button of a connected hidden SSID Wi-Fi network
and save the QR code image. Use Wi-Fi QR code scanner in Wi-Fi
Settings to scan the saved QR code image.
Change-Id: I9056622e6dadb04e5642ae1c50fb4d227a78d26d
Merged-In: I9056622e6dadb04e5642ae1c50fb4d227a78d26d
Context#getResources loading is done based on the last SIM to
come up, we may get wrong customization settings.
This fix check the setting of active subscription and shows the preference.
Bug: 138956509
Test: CellularFallbackPreferenceControllerTest
manual test:
1. Insert feature supported SIM and check UI.
2. Remove feature supported SIM and check UI.
3. Turn airplane mode on and check 1. and 2..
Change-Id: I72b6db415429181395a02f163889bb1b9c0f070f
Merged-In: I72b6db415429181395a02f163889bb1b9c0f070f
1. Only support EAP-TLS for WPA3-Enterprise 192-bit
2. Remove "Do not validate" from the CA certificate menu
3. Remove "Do not provide" from user certificate menu
Bug: 135127581
Test: WifiConfigControllerTest
Change-Id: Ibf904da9407ec803afb8bb995e9df1a2e25f0dcb
Merged-In: Ibf904da9407ec803afb8bb995e9df1a2e25f0dcb
Currently, the title will not update at all if set to silent.
Bug: 130445562
Test: make RunSettingsRoboTests -j48
Change-Id: Id8fc0182adb37c05436f5924b7dcdffb9d994e0d
Users may have trouble finding this setting in face auth.
Heard this from dogfood/executive feedback and customer support discussion.
So add Skip Lock Screen preference in
Display > Lock screen display > What to show >
and
App & Notifications > Notifications > Lock Screen >
Bug: 138458558
Test: robotest & manual
Change-Id: I10e420821423821743d65b00c8b7e6d4d1224e00
If the DISALLOW_CONFIG_MOBILE_NETWORKS admin policy is set, we were
accidentally still allowing access to the flow where you add an eSIM
subscription via the "plus" button on the Network & internet page. While
fixing this, I also noticed that the mobile networks list page (which
only becomes available if you have multiple subscriptions) has a link at
the bottom to start the flow as well, and that wasn't being protected.
The fix for the plus button on the Network & internet page was just to
make sure not to call setEnabled(true) if the preference was already
disabled by admin policy, since that has the effect of overriding the
admin-disabling.
The fix for the mobile networks list page just needed to add the
relevant tags in the layout XML, and then we get it for free.
Fixes: 137627845
Test: make RunSettingsRoboTests
Change-Id: I896ac248f50aaeecc157791938a0a0a98265aa07
The controller for the "Preferred network type" preference on the SIM
details page wasn't listening for changes to the underlying global
setting, so changes to the setting would be reflected in SysUI but not
on this page if it happened to be showing.
Bug: 135667565
Test: make RunSettingsRoboTests
Change-Id: I5dfe4843a681c613f49caf4584e9dbebc54e708a
If user enters face settings but does not enter the password, then
turns off the screen, it's possible the challenge is invalidated. Instead,
we should finish() the device credential screen as well as FaceSettings.
This prevents
1) The user from being prompted for credential with lack of context
2) Credential returning a HAT that wraps an invalidated challenge
The user will be returned to the security settings screen, where they
have more context and can decide if they want to enter face settings again.
Fixes: 138273242
Test: 1) Open face settings, do not enter password
2) Press power button
3) Unlock keyguard
4) User is not presented with credential screen
Test: Go through SUW, turning on/off the screen at various security
screens. Able to enroll successfully
Change-Id: I3c3d4600138012821bb0eea7d2927df00011cdb0
And a hidden preference category. This makes
hiding/showing the list a lot cleaner and also allows more
of the code to be tested.
Also delete some unused code that no longer complied after
this refactor.
Fixes: 133443871
Test: atest
Change-Id: I4a5fe0e075019bae2df44a0a9dcec26a40ee6d12
(cherry picked from commit a295d71c94)
In general the mobile network details page has several preference
controllers that don't listen to carrier config changes, so instead of
having each one add a listener, we instead just have one listener and
refresh the entire page when we see the broadcast.
Fixes: 135587885
Test: make RunSettingsRoboTests
Change-Id: Iff5b28dbfe12d94c901b442b23cece8e68218983
Currently we always send cancel() if ConfirmDeviceCredentialActivity
goes into the background. However, if the biometric state is no longer
authenticating, requesting cancel() in this state will result in an
inconsistent state between BiometricService/client and
ConfirmDeviceCredentials.
BiometricService/client will receive the ERROR_CANCELED message incorrectly,
while ConfirmDeviceCredential is showing / pending user password. When
the password is entered, its result is ignored.
The correct behavior is for ConfirmDeviceCredentialActivity to invoke
cancel() only if it's still authenticating. Otherwise BiometricService
and its client will receive ERROR_CANCELED, instead of the actual password
auth result.
Bug: 138279856
Test: BiometricPromptDemo, enable device credential fallback, get into
lockout state, successfully enter password. API result is
success instead of "canceled" now.
Change-Id: I6521e896d0402fe856dc85476f51149c9b3084a8
updateState was invoked in loader callback. But the
package was uninstalled at the callback time caused
null pointer exception. Add null check to prevent
null pointer access.
Fixes: 136170218
Fixes: 133771724
Test: make RunSettingsRoboTests, manual
Change-Id: I2715e77f6e32af42a4bce70c9f409b0311eb36c4
(cherry picked from commit 790a822526)
Bug: 138197084
Test: Verified other accessibility features like Live Transcribe does
not bring the user to the accessibility flow.
Test: Verified that the Sound Amplifier does not bring the user to
the accessibility flow.
Change-Id: I5131d74926c0b01c565da280c55afe0080855688
