Re-launching volume panel continuously will trigger an endless panel
loading, show a transparent unfinished UI, and then block the user's
screen.
Root cause:
When the activity receives a new intent from user's clicking, it will
call PanelFragment#createPanelContent to update the current fragment.
The method triggers an animation and then loads the panel content. If
multiple invocations run concurrently before the animation or the
loading finish, the loader's countdown latch will be increased
abnormally and lead to the endless loading.
Solution:
1. Since the invocations are in UI thread, simply add a flag to avoid
reentrance when the panel is animating or loading.
2. Filter out the same panel's creation request when the panel is still
visible.
3. Do not force a panel's recreation when it's under construction.
Bug: 143889510
Bug: 160491854
Test: robotest, manual
Change-Id: I821faedeb62354929f3af9804cbbe44ee5bb8a53
- This CL before, "Previously connected device" didn't
handle dock device. If user have disconnected dock
device will cause Settings crash.
This CL add condition to handle dock device to avoid crash.
- Update test case.
Bug: 167054620
Test: make -j42 RunSettingsRoboTests
Change-Id: I769cee3f589e14a993b00a0ae6ec3ddfba8ef281
-To set highest priority when codec modification comes from development setting
Bug: 165442632
Test: make -j42 RunSettingsRoboTests
Change-Id: I8cfbaa276f3b3e269f4a80e8aae987fbb90f646e
Use hashcode as a requestCode id, since the
same requestCode will cause the intent be cached.
Bug: 163095633
Test: make -j42 RunSettingsRoboTests
Change-Id: I2c120f18e24a66aeff5565e952fa4064149ec540
Revert "Snap for 6793014 from 3157b4ee4325286f0c2ab0f26528460c8b..."
Revert "Snap for 6793014 from a43295d1825da62af038d345a7a861ed7a..."
Revert "Snap for 6793014 from 2076be4d27078d6ebc0a6b5e5ceb386109..."
Revert "Snap for 6793014 from d0e31526c62b2aeb35c293ac96feb180fc..."
Revert "Snap for 6793014 from 7a3a8c6351d5167a6ae0b33bc376efabd2..."
Revert "Snap for 6793014 from 41471cb21bb16b5c3bcc92f84293b79684..."
Revert "Snap for 6793014 from 42e5cca3cfb829690c9d8c6aca57a8e7d5..."
Revert "Snap for 6793014 from 4f81304963d19f4511b1e8e7d0aad87a67..."
Revert "Snap for 6793014 from 07602cdacf5bcc835db41f7eaa24af9964..."
Revert "Snap for 6793014 from 14cb57e107a3abce8b14937b1f92c28d18..."
Revert "Snap for 6793014 from ab1e4a81d09a540a5f927059e5bc03a606..."
Revert "Snap for 6793014 from 8c65adad0bcdfb3acc561063b4048dca24..."
Revert "Snap for 6793014 from b3061942700265e2bf04af9997775dcbbb..."
Revert "Snap for 6793014 from 551c5953fc62e339e4ee884ec2cd0ac3be..."
Revert "Snap for 6793014 from 4919273b2ac5c6347a18e17c5ec70d8da6..."
Revert "Snap for 6793014 from 988d4244914e0c749655e8cb6db18ba44f..."
Revert submission 12465146-release-request-6b259cbc-1f45-4b05-bc7e-c9b893b79d68-for-git_main-busytown-release-6793014
Reason for revert: b/166531456
Reverted Changes:
I5ff7a6c0d:Snap for 6793014 from f2989f9c65556d5155dbd57f82f0...
I77bdff943:Snap for 6793014 from a43295d1825da62af038d345a7a8...
I2ac5c520a:Snap for 6793014 from c3f124cca05579acf0a6cb589ebd...
I023b9702f:Snap for 6793014 from 98756d6d3e2bb0ba28eb125caa7a...
Ibc7893d72:Snap for 6793014 from fd1ad6750ef332d3f50f218f4d5d...
Ic27847bee:Snap for 6793014 from 8c65adad0bcdfb3acc561063b404...
If20bc9352:Snap for 6793014 from 7a3a8c6351d5167a6ae0b33bc376...
I6542d17e8:Snap for 6793014 from 3777d883a3857b1a1589181c436d...
I66e6bb8a9:Snap for 6793014 from 8b8bf0a07b0521bbe8483fbbab12...
I3cd190b6b:Snap for 6793014 from 424180bdc4aa18249e678daebfd0...
If92db7402:Snap for 6793014 from ab1e4a81d09a540a5f927059e5bc...
Iaced03c87:Snap for 6793014 from d0e31526c62b2aeb35c293ac96fe...
I5d28c6b4b:Snap for 6793014 from 4f81304963d19f4511b1e8e7d0aa...
I30d07bea3:Snap for 6793014 from 7594ec6384c4da320726def34f47...
I473205f48:Snap for 6793014 from 551c5953fc62e339e4ee884ec2cd...
I0656b41af:Snap for 6793014 from 44725f06b7f7d6407b5ee82d989b...
I0f9796067:Snap for 6793014 from 4919273b2ac5c6347a18e17c5ec7...
I9a38cda8f:Snap for 6793014 from 2076be4d27078d6ebc0a6b5e5ceb...
I876a82f51:Snap for 6793014 from 11467102abddb6026aaa164c1361...
I749d7d023:Snap for 6793014 from 41471cb21bb16b5c3bcc92f84293...
I038daea41:Snap for 6793014 from 07602cdacf5bcc835db41f7eaa24...
I47aa3131c:Snap for 6793014 from 14cb57e107a3abce8b14937b1f92...
I32dba8a95:Snap for 6793014 from 3157b4ee4325286f0c2ab0f26528...
I2ebc9f9db:Snap for 6793014 from 988d4244914e0c749655e8cb6db1...
Iae7c3370f:Snap for 6793014 from 9ffb8852294e06e2d387dc1fb868...
I6467a7f1b:Snap for 6793014 from 42e5cca3cfb829690c9d8c6aca57...
I8c6375203:Snap for 6793014 from b3061942700265e2bf04af999777...
I843b2e1f3:Snap for 6793014 from 265280bf5cb4bc14e132c3a35ae5...
Ie254f7079:Snap for 6793014 from f22ad3164937a8f2e309965c102b...
I01e0974ed:Snap for 6793014 from bbbccc3c2b7fc7c5780f6c415c42...
Change-Id: Ie8b2b332f7ebaaee7cd39c6f94d280c047426bc9
- This CL before, previously connected devices will show most
recently connected devices and the maximum is 3.
In this time, if next most recently connected device is disconnected.
It's will not show on "previously connected devices", user needs go to
"see all" page to found that device.
This CL add rule to compare the priority of most recently connected
device. If priority of next disconnected device is higher than
currnect devices that on "previously connected devices".
Let next disconnected device show on "previously connected devices".
- Update test case.
Bug: 157653997
Test: make -j42 RunSettingsRoboTests
Change-Id: I684501a20a67755b2196ba9d4b5565add01a5d01
'Adaptive connectivity' toggle button controls whether
network connection is automatically managed.
Bug: 162871294
Test: make RunSettingsRoboTests
manual
Switch the toggle button and reboot device, observe
if the state is retained.
Change-Id: I4499a3639abab356e8faa6316bfa45541efd63ac
* changes:
Fix the screen will move by itself when enabled Color correction.
Refine and migrate the functions that related to update preference into the specific lifecycle.
Root Cause:
Using the listener to update the UI dynamically might have some time delay.
Solution:
Refactor to another implementation and avoid using the listener to update it.
Additional condition:
Add height restriction in preference to avoid the palette view to cover whole screen.
Bug: 148785841
Test: make RunSettingsRoboTests ROBOTEST_FILTER=PaletteListPreferenceTest
Change-Id: I6a854e16321b3426e2f8ff65c6404036d55caed4
In about phone SIM status dialog fragment does not correctly remove the subscription change listener and broadcast receiver during SIM swap, which results in IllegalStateException force close and memroy leak.
Make sure to remove sub change listener and un-register broadcast receiver in SIM swap case.
Bug: 159410236
Change-Id: I7867852c58b2b38e0afc73422b7d616aa305199c
This adds a new section to the media controls settings screen with a
list of apps that could potentially be used for resumption. If an app is
toggled off it will be added to a list of apps which will not persist in
QS, even when resumption is on.
Also updated the strings on this setting page to match UX
recommendation, so the default toggle state is now on.
Bug: 161813143
Bug: 159852516
Test: manual
Test: atest SettingsProviderTests
Test: make -j40 RunSettingsRoboTests ROBOTEST_FILTER="ResumableMedia"
Change-Id: Id3de52419ffba233469396dd47439428201e5e00
Merged-In: Id3de52419ffba233469396dd47439428201e5e00
* Move onClickListener to LinearLayout since checkbox has null background in xml
* Rewrite setTextAreasClickListener logic to fit the need: at least one
checkbox need to be checked, and to let talkback announce disabled when
view is really in disabled state.
Bug: 164343865
Test: manual test
Change-Id: Ia5a831febc41f01858908cbdc365cf9a6a1282e3
LockSettingsService returns a handle to the gatekeeper password
instead of the password itself now. As such, update areas of code
accordingly.
Bug: 161765592
Test: RunSettingsRoboTests
Run the following on face/fingerprint devices
Test: Remove credential
adb shell am start -a android.app.action.SET_NEW_PASSWORD
Set up credential + fingerprint
Test: Remove credential,
adb shell am start -a android.settings.FINGERPRINT_SETTINGS
This tests the ChooseLock* logic in FingerprintSettings
Test: Set up credential,
adb shell am start -a android.settings.FINGERPRINT_SETTINGS
This tests the ConfirmLock* logic in FingerprintSettings
Test: Remove device credential, enroll fingerprint/face. Succeeds.
This tests the ChooseLock* returning SP path from
BiometricEnrollIntro
Test: With credential and fingerprint/face enrolled, go to
fingerprint/face settings and enroll. This tests the
ConfirmLock* path in Fingerprint/FaceSettings
Test: Remove device credential, enroll credential-only, enroll
fingerprint/face separately. Succeeds. This tests the
ConfirmLock* returning SP path in BiometricEnrollIntro
Test: In SUW, set up credential, then biometric. This tests
the ChooseLock* path in SUW
Test: In SUW, set up credential, go back, then set up biometric.
This tests the ConfirmLock* path in SUW
Change-Id: Ibc71ec88f8192620d041bfd125f400371708b296
eUICC card could potential in the card error state and all the eSIM
operations will fail which could be fixed by a reboot. Thus, we need to
pop up a dialog to inform users that their eSIM profiles cannot be
erased successfully.
Bug: 163078560
Test: Manually tested by mocking the eUICC card error state.
Mock: https://docs.google.com/presentation/d/1AVNXxPbieTX1KmoewG4mo3xWPnEZyba_h9rPcwHHcr8/edit#slide=id.p
Change-Id: I102fb2de889e08554f525f2cbe1528bb9a37afd7
