Create a mechanism to allow OEM config posture guidance with
'config_face_enroll_guidance_page', and customize the config
'config_face_enroll_supported_posture' with standard postures
0 : DEVICE_POSTURE_UNKNOWN
1 : DEVICE_POSTURE_CLOSED
2 : DEVICE_POSTURE_HALF_OPENED
3 : DEVICE_POSTURE_OPENED
4 : DEVICE_POSTURE_FLIPPED
For example, if we set 1 for the device, then device only
allow to enroll face in closed(folded) state, if device do
not in the allow state, we will prompt specific guidance
page activity defined in config_face_enroll_guidance_page.
At this stage , we only integrate 2 states OPENED/CLOSED through
ScreenSizeFoldProvider and register for onFoldUpdated() callback
- isFold(DEVICE_POSTURE_CLOSED): finish posture guidance
- !isFold(DEVICE_POSTURE_OPENED): launch posture guidance
- onActivityResult : reset mOnGuidanceShown false
1. Fix A11y lottie animation bug
2. Impl FoldProvider.FoldCallback
3. Register callback to ScreenSizeFoldProvider
4. Integrate back stack, skip, cancel events
- Back key : RESULT_CANCELED
- Skip btn : RESULT_SKIP
- Posture changed : RESULT_FINISHED
5. Set single instance for relative activities
6. FaceEnrollFoldPage listen for onConfigurationChanged()
7. Add empty face_posture_guidance_lottie.json for overlay
Test: atest SettingsGoogleUnitTests
Test: m -j SettingsGoogleRoboTests RunSettingsGoogleRoboTests
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollEducationTest"
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollIntroductionTest"
Test: Manual launch security settings face enroll, unfold device
and observe posture guidance showing fullscreen on top
Test: Fold device ensure the posture guidance activity finish
Bug: 261141826
Fixes: 231908496
Change-Id: Ib9f43f82f7d19f3f187c2f6f8984e76cd843afbc
Merged-In: Ib9f43f82f7d19f3f187c2f6f8984e76cd843afbc
1. Add config_suw_support_face_enroll default is TRUE
2. Impl FaceFeatureProvider to obtain the config
3. Overlay config_suw_support_face_enroll by requirements
Test: Flash build and manual check if device go through face enroll in SUW
Bug: 262469686
Change-Id: I61aa5c818bedfb490f2172a7481f59fda7295c1a
Merged-In: I61aa5c818bedfb490f2172a7481f59fda7295c1a
Since the SetupChooseLockPattern include header icon
header title, header sub-title, pattern state description,
LockPatternView and FooterBar, there was a limited room
for LockPatternView especially in the confirm steps which
both header title and pattern description occupy 2 lines space.
Hance the PatternView size used to inconsistence in-between
1st draw and 2nd confirm draw, besides it's visual looks
jumping and small on some device which have smaller display.
This solution includes 3 changes:
1. Organized the pattern view message to leverage
header sub-title view, then we can resever more space.
(Set minHeight=2 for sub-title)
2. Set screen_lock_options button visibilty to GONE when
the stage in 2nd confirmation.(Previously it's INVISIBLE
and reserve additional space)
3. Let LockPatternView align bottom of FrameLayout to prevent
the view juming and flicker.
4. Clean up unused forAnyBiometric flag and code.
5. GlifLayout.getDescriptionTextView() == mHeaderView
Need setDescriptionText() to make the view from GONE -> VISIBLE
6. Polish the stage flow and ensure IntroductionStage show
correct message
7. Add ChooseLockPattern into embeded activity white list
Force show ChooseLockPattern in fullscreen in case the Pattern
view truncated in `NeedToConfirmStage` where the title showing
2 lines and push pattern view down, and get bad UX in the
device which integrate a shorter display.
8. Add test cases for all stage and polish legacy test code.
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.SetupChooseLockPatternTest"
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.ChooseLockPatternTest"
Bug: 249974175
Bug: 260027850
Change-Id: I868af9b14ba99af5d78a05f6c2a570ccc07aea15
1. Set biometric_auth_pattern_view_size: 348dp (portrait)
2. Set resilience size 248dp~348dp for landscape mode
biometric_auth_pattern_view_(max_)size
3. Set 348dp size for sw410dp when display density < 560
Set 248dp-348dp resilience size for sw410dp-land
4. Add sw392dp sw392dp-land with density 440 projects
5. Set sw600dp/sw720dp/sw800dp for large screen device
6. Reference dimen biometric_auth_pattern_view_size in style
7. Remove redundant dup AuthCredentialPatternContainerStyle
8. Remove max & min bounds from AuthCredentialPatternContainerStyle
9. Remove unused choose_lockscreen_min_height dimen
10. Reduce footerText min hight to reserve more space for pattern view
Bug: 234847272
Bug: 243008023
Bug: 243699695
Test: manual
Test: m RunSettingsRoboTests -j30 ROBOTEST_FILTER=\
ChooseLockPatternTest
Test: m RunSettingsRoboTests -j30 ROBOTEST_FILTER=\
SetupChooseLockPatternTest
Change-Id: Icfc2932279aa9e3a065030dbb7ff73f12ed6d081
Merged-In: Icfc2932279aa9e3a065030dbb7ff73f12ed6d081
Since the SetupChooseLockPattern include header icon
header title, header sub-title, pattern state description,
LockPatternView and FooterBar, there was a limited room
for LockPatternView especially in the confirm steps which
both header title and pattern description occupy 2 lines space.
Hance the PatternView size used to inconsistence in-between
1st draw and 2nd confirm draw, besides it's visual looks
jumping and small on some device which have smaller display.
This solution includes 3 changes:
1. Organized the pattern view message to leverage
header sub-title view, then we can resever more space.
(Set minHeight=2 for sub-title)
2. Set screen_lock_options button visibilty to GONE when
the stage in 2nd confirmation.(Previously it's INVISIBLE
and reserve additional space)
3. Let LockPatternView align bottom of FrameLayout to prevent
the view juming and flicker.
4. Clean up unused forAnyBiometric flag and code.
5. GlifLayout.getDescriptionTextView() == mHeaderView
Need setDescriptionText() to make the view from GONE -> VISIBLE
6. Polish the stage flow and ensure IntroductionStage show
correct message
7. Add ChooseLockPattern into embeded activity white list
Force show ChooseLockPattern in fullscreen in case the Pattern
view truncated in `NeedToConfirmStage` where the title showing
2 lines and push pattern view down, and get bad UX in the
device which integrate a shorter display.
8. Add test cases for all stage and polish legacy test code.
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.SetupChooseLockPatternTest"
Test: make RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.password.ChooseLockPatternTest"
Bug: 249974175
Bug: 260027850
Change-Id: I868af9b14ba99af5d78a05f6c2a570ccc07aea15
Bug: 243902048
Test: manual - check that the illustration on tablet is shown
- check that switching between dark and light theme
updates the illustration
- do above on phone
Change-Id: Idcc3660be287ed26a231813001de0517481ef514
No need to gate under feature flag, it only shows if
Spatial Audio exists on device.
Test: Connect BT headset and see spatial audio settings
Bug: 264709855
Change-Id: Iddda3eb430b62880036bbe8c680addca07a60ab2
Create a mechanism to allow OEM config posture guidance with
'config_face_enroll_guidance_page', and customize the config
'config_face_enroll_supported_posture' with standard postures
0 : DEVICE_POSTURE_UNKNOWN
1 : DEVICE_POSTURE_CLOSED
2 : DEVICE_POSTURE_HALF_OPENED
3 : DEVICE_POSTURE_OPENED
4 : DEVICE_POSTURE_FLIPPED
For example, if we set 1 for the device, then device only
allow to enroll face in closed(folded) state, if device do
not in the allow state, we will prompt specific guidance
page activity defined in config_face_enroll_guidance_page.
At this stage , we only integrate 2 states OPENED/CLOSED through
ScreenSizeFoldProvider and register for onFoldUpdated() callback
- isFold(DEVICE_POSTURE_CLOSED): finish posture guidance
- !isFold(DEVICE_POSTURE_OPENED): launch posture guidance
- onActivityResult : reset mOnGuidanceShown false
1. Fix A11y lottie animation bug
2. Impl FoldProvider.FoldCallback
3. Register callback to ScreenSizeFoldProvider
4. Integrate back stack, skip, cancel events
- Back key : RESULT_CANCELED
- Skip btn : RESULT_SKIP
- Posture changed : RESULT_FINISHED
5. Set single instance for relative activities
6. FaceEnrollFoldPage listen for onConfigurationChanged()
7. Add empty face_posture_guidance_lottie.json for overlay
Test: atest SettingsGoogleUnitTests
Test: m -j SettingsGoogleRoboTests RunSettingsGoogleRoboTests
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollEducationTest"
Test: m RunSettingsRoboTests ROBOTEST_FILTER= \
"com.android.settings.biometrics.face.FaceEnrollIntroductionTest"
Test: Manual launch security settings face enroll, unfold device
and observe posture guidance showing fullscreen on top
Test: Fold device ensure the posture guidance activity finish
Bug: 261141826
Fixes: 231908496
Change-Id: Ib9f43f82f7d19f3f187c2f6f8984e76cd843afbc
The entry should be hidden if the RUN_LONG_JOBS can't be toggled.
Bug: 255821578
Test: atest AppFilterRegistryTest
Test: make -j RunSettingsRoboTests \
ROBOTTEST_FILTER="LongBackgroundTasksDetailsTest|
LongBackgroundTasksDetailsPreferenceControllerTest"
Test: Manually check the Settings page
Change-Id: Ib1c58d93b40afefdf3ca666c661e213d01c542c6
1. Add config_suw_support_face_enroll default is TRUE
2. Impl FaceFeatureProvider to obtain the config
3. Overlay config_suw_support_face_enroll by requirements
Test: Flash build and manual check if device go through face enroll in SUW
Bug: 262469686
Change-Id: I61aa5c818bedfb490f2172a7481f59fda7295c1a
This also fixes the role holder not updating when the
default role holder has changed.
Test: StylusDevicesControllerTest
Bug: 254834764
Change-Id: Iec7ed7698f18279da9a04918dcdf3e20e73609d1
- Temperature unit
- Calendar type
- First day of week
Bug: b/246929960
Bug: b/247072550
Bug: b/247071792
Bug: b/247071572
Test: atest passed
Test: Manual test passed
Change-Id: Iea093588da33b352b5e7bfa5c483659e7afb8296
The added files in this CL are mostly copied from SystemUI. Enabling the flag SETTINGS_SHOW_UDFPS_ENROLL_IN_SETTINGS with this CL, the udfps enrollment icons and progress bar are shown in settings.
Turn this flag on via adb:
adb shell setprop sys.fflag.override.settings_show_udfps_enroll_in_settings true
There are some known issues that will be fixed in the following CLs, including:
- When the finger is down on the screen and the lighting circle on the sensor is shown, the fingerprint icon is not hidden.
- When rotating the screen, fingerprint location is not right.
- Currently the scale factor is hard coded for pixel 7 pro, we should update the scale factor based on the device, etc.
Test: manually tested on device
Bug: 260617060
Change-Id: I5aede070eb1de9eb3b5e1400d6e51a8523079852
