1) Should only be shown for owner profile
2) Should be disabled if A) not enrolled, B) DevicePolicyManager, C) HAL issue
Fixes: 134700640
Test: Manual test of conditions above
Change-Id: Id72db59c662df6c529c98aafd610de8c86c77ebd
Fixes: 134700640
Test: atest FaceSettingsLockscreenBypassPreferenceControllerTest
Test: enabling/disabling setting through Settings > Security > Face unlock
works as expected
Test: preference controller no longer seen in Settings > Display > Lock screen display
Change-Id: I54807ad92fac62398a2b9dab93dd638775a09c8d
Bug: 134971919
Test: Entering keyguard on any enrollment screen finishes enrollment now
Test: Going back/forward works
Change-Id: I2c80a5586c10fa3feb780a5eadfe203abed52dea
Test: Tapping the whole area will now toggle the switch. Note that
it is no longer possible to individually select the title and subtitle during
talkback, but you can select them as a group.
Test: Verified that without talkback the user must actually press
switch.
Fixes: 130398575
Change-Id: I369637f23e41ac6dc4333293b95a5ccae259ee1f
This change shows buttons of QR code scnanner and QR code generator
for a connected Wi-Fi network.
Bug: 134706055
Test: Generate QR code for a WPA2/WPA3 personal transition mode Wi-Fi AP
and check if the security type is WPA2 personal.
Generate QR code for open network.
Generate QR code for OWE network.
Scan a QR code of open network, verify connection.
Scan a QR code of OWE network, verify connection.
Scan a QR code of WPA3 network, verify connection.
Scan a QR code of WPA3 network, verify transition mode connection.
Change-Id: I60f2c38585f85745f992fa63a5ea85312f08c5e5
If we didn't set view and lifecycle for EntityHeaderController,
it only sets "z-order" as 0 for action bar.
So, user sees overlapped problem while user is scrolling view.
For now, we set view and lifecycle as parameter for EntityHeaderController,
then EntityHeaderController can change "z-order" while scrolling view.
Test: visual, robotest
Fixes: 132819126
Change-Id: Ieb01b26e4d6ca4d82f72371620938665de8149a0
We are putting this particular Google string into AOSP because:
1. This feature is part of platform mainline and has a hard dependency
to Google Play.
2. Settings code has no way to target gms devices, or mainline devices.
It's either AOSP or OEM. And this change is beyond OEM.
Fixes: 134101529
Test: manual
Change-Id: Ic4e7a7539230db0390bb9230931132e5500a1eb4
Our original design for mobile network subscription management included
having an on/off toggle for both eSIMs and physical SIMs. However, it
turns out that our current telephony stack has some problems with
disabling physical SIMs, so for now we're removing the on/off
toggle. Because of this, we've added a footer to the SIM details page
for physical SIMS letting users know that to disable them you need to
remove them from the device.
Even though we're removing the on/off toggle for pSIMs, there are still
a few edge cases where you could end up with a disabled one (eg having
two SIMs in single-SIM mode where the eSIM is active and then you erased
the eSIM). In order to have a way to re-enable the pSIM in these cases,
this CL changes the relevant pref's summary to "Tap to activate <name>"
and makes the tap action begin the re-enabling. This can affect either
the Mobile network pref on the Network & internet main page (if this
disabled pSIM is the only SIM), or an entry in the Mobile networks list
page (if there are still multiple SIMs present).
Finally, this also fixes a problem where we weren't showing the on/off
toggle for eSIMs if you only had one SIM total; we actually always want
to show it for eSIMs.
Bug: 132921553
Test: make RunSettingsRoboTests
Change-Id: Id0750ebd5bed46dc2450b65b53cc81847ef09b82
Fixes: 133822544
Test: No more multiple instances of fingerprint settings after enrolling
from within the settings page
Test: adb shell am start -a android.settings.BIOMETRIC_ENROLL does not
send the user to fingerprint settings after completing enrollment
Change-Id: I003dc142b01ed6ffae83299ab4b69f4896eb93e3
If the user exits the no Internet or partial connectivity dialog
without taking any action, there is no longer any way to use the
network. So, disconnect the network.
Bug: 130766237
Test: clicking outside dialog disconnects network
Test: orientation changes do not disconnect network
Change-Id: I80c2c98c994dc01e53b32f40332b3f1bd03b6012
NfcAirplaneModeObserver added a scenario that
switched NFC off every time a user entered connection
preferences page if airplane mode was on.
Even when a user manually switched on NFC, the observer would still
turn NFC off when re-entering connection preferences page.
GSAM TS.27 certification requires NFC state to be consistent
under AirplaneMode before and after reboot the device.
NfcAirplaneModeObserver breaks the requirement
because it would always switch NFC off under airplane mode
when a user checked the NFC state in settings page.
Fix it by removing NfcAirplaneModeObserver.
Keep the NFC state consistent.
Bug:128384879
Test: make RunSettingsRoboTests / Check Nfc on/off Status
Merged-In: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
Change-Id: If4c8e47c2509b09e8bc1a464e1ab329b945e3d20
