+ Removed Wi-Fi Assistant message in Wi-Fi Advanced since it was
overridden by the Wi-Fi Assistant.
+ Removed Wi-Fi Assistant message in Wi-Fi Assistant Card. Instead,
it is programatically created when the scorer is known.
+ "Google" was replaced with a placeholder.
Bug: 17457236
Change-Id: If3aab06c911ecf6ec13cbf00dea2fe9333abc1fc
SDK version is an int, not a long. (Also change SharedPreference key
to avoid issues for people who've already dismissed the Wifi Assistant
card).
Bug: 17304642
Change-Id: Ic959516b88e91edd53562703fa7db9c15ead20e4
Use a custom empty view to show the status while wifi is scanning
or off. Cannot use android.R.id.empty because in phone portrait
layout the illustration is the listview header, which will be hidden
if the list is empty and we use ListView.setEmptyView.
Bug: 17183006
Change-Id: Ie8598303f4e61f87e078008fb7a03918ba92c9ef
This replaces the previous behavior of an increasing timeout. When the
user dismisses the WiFi Assistant card, either by opting out or
successfully configuring the assistant, the card is suppressed until
the next major platform upgrade (assuming the assistant is not enabled
at the time of the upgrade).
Bug: 16902858
Change-Id: I5373a7a743f21777b7b75a620b5a4e9004e57466
Use a ListView header instead of a Preference to display the card at
the top of the list.
Also clean some dead code.
Bug: 16378017
Change-Id: I5a7f1d197cde071c45395b6d7f6016aa7201187a
This is not right because wpa_supplicant states are transient (for instance when the WiFi Layer, at Layer 2, is going thru some harmless spurious disconnection cycle due to WiFi signal fluctuation). This cause the state of the WiFi Network to appear to be unstable to the user.
Hence, I removed dependencies on wpa_supplicant internal state.
In addition so as to improve debugging, I added the BSSID to the Wifi Verbose Logging string which is shown in wifi picker alongside the current network. This string only appear when a user goes into Developper Options and enable WiFi Verbose Logging.
The below bug is an example of situation where a spurious disconnect (a coupld seconds) handled by wpa_supplicant can cause the WiFi Settings to indicate that the link is unstable.
Bug:16140888 Wifi best network selection not smooth
Change-Id: I0e7c6b86262b88ed993c46fcdcdbab4d9b1f5ea1
Do not create the assistant card if we are in WifiPickerActivity,
which includes setup wizard and account login.
Bug: 16382431
Change-Id: Id5eaa8040eafe5222e1a5c9276a2a10bedebfd71
We have been using forget() to prevent auto-reconnection when the
user hits back to Wifi setup. This has the side effect of forgetting
networks, which is undesirable especially for password protected APs.
The new mechanism keeps a flag on whether the user has selected a
connection. Only auto-advance if the user has picked a network and
there is a valid WiFi connection.
The new EXTRA_REQUIRE_USER_SELECTION can specify whether a user
selection is required initially. That is, whether to auto finish if
the system connected to a network without user input. The default is
false so WiFi can be skipped if the user started setup wizard with
a valid WiFi connection (e.g. after System Update). Note that a user
selection is always required when the user goes back from the next
screen.
Since the new AP dialog does not have a connect button, the SKIP
button in the navigation bar also changes to NEXT when there is a
valid WiFi connection, so the user can hit NEXT if they decided not
to change the network.
Bug: 15333554
Bug: 15999487
Change-Id: I98e935b8e09e470a0c49c44bc299bb2eced98634
Only show the card if we haven't already enabled an assistant, and if
there's one available on the device to enable. (For now, we enable the
first one; in the future, we can offer a selection between
assistants).
When the user opts in, we either show the standard system activity or
the custom opt-in activity if the assistant has defined one. In either
case, we only dismiss the card if the child activity indicates that
opt-in was successful.
Bug: 16376277
Change-Id: Ic92c7676c563ab8c8fb695117a053004f15f7d25
+ Show Wi-Fi Assistant card above network list that scroll under the action bar with the rest of the list
+ Display a promo image and text
+ Clicking "Setup" should link to the selected Wi-Fi assistant app (must be open to 3rd parties)
+ Touching "No, Thanks" should snooze this card for 30 days / 2nd time 90 / 3rd time 180 days / then forever
Bug: 15703202
Change-Id: If74101bea630246c6bda2de3ed79fee72eca4c0c
+ Added Saved networks to Overflow menu
+ Moved WPS Pin Entry from Overflow menu to Advance Setting Activity
+ "Automatically manage Wi-Fi : Let a Wi-Fi assistant manage your connection"
+ "Wi-Fi assistant : <selected assistant> [cog secondary hit target]
+ MAC address & IP address list items have the static italic style
- "Avoid poor connections" from Advance Settings
- "Wi-Fi optimization" from Advance Settings
Bug: 15698824
Change-Id: Ieb25b29874752db07398dcb200ec07862779f507
+ Changed wifi icons to teal
+ Removed “Secured with …” from network status
+ Added an empty state image above text when Wi-Fi is off
+ Removed Wi-Fi Direct and WPS Push button from overflow menu
+ Added Wi-Fi Direct and WPS Push button to Advance Activity
+ Input Password Dialog: Moved Signal Strength and Security to Advance
+ Input Password Dialog: Updated Password text to Material style
BugId: #15698824#15702808
Change-Id: I542ab9aac2c098738330c92d9183d3907c4f0b38
Partial revert of ag/475394 which moved enable-next-on-connect
behavior to setup wizard specific code. But account creation was
using it outside of setup wizard context.
Change-Id: I575976207a3ba2b5dac7e5467036e6ec7f519d9d
- change the way the SwitchBar is shown and hidden
- save its state
- remove the delay transition code
Change-Id: I07260430e6709b42517ca011f6d3c3446a626731
Extracted setup-related code from WifiSettings, putting it into a new
derived class, WifiSettingsForSetupWizard.
Set taskAffinity to com.android.wizard, for alignment with other
setup wizard-related tasks.
Change-Id: If371f219dac5d3eff8f7899c16cc6f9475be47cf
- SwitchBar is a LinearLayout that containts a TextView and a Switch and
is intended to replace all Switches that are put in the ActionBar as a
custom view
- use the new SwitchBar for WifiSetting only for now (a later CL will
take care of all the other Setting that are using a Switch in the
ActionBar)
Related to bug #14898161 On/Off switches must move down from Action Bar
Change-Id: I5e98dbe995bba8f440d08459e09ca3ac09d3464b
- the EXTRA_NO_HEADERS flag as no more meaning as we are showing
the Tiles (previously named "Headers") only in the Dashboard
(which is the main Settings screen)
Change-Id: I55656de0d28ca9c84adbe6647d870838b4ac230b
- getNonIndexableKeys(Context) allow a SearchIndexProvider to tell which data
he does not want to index by providing a list of the data keys
- use this new API for SoundSettings and removing KEY_EMERGENCY_TONE related
settings if the device is not CDMA
- add a BaseSearchIndexProvider for code simplification
Change-Id: I23633ace1d7e390ee05fac0a5458a33e04e72d8d
Configured networks expose the option to
write config to an NFC tag. This tag can be
then tapped to another device to configure
the same network. Implemented according to
WiFi Alliance WPS spec.
Change-Id: I33a1be1610aab71cf1ab864418d494027370ebca
- follow the UX spec by no more using a Drawer
- the Dashboard is now a Fragment that contains the list of Headers
- the search results are also put into a Fragment that is replacing
the initial one (Dashboard or other) when expanding the SearchView
- use a SearchView for query input
- when tapping on a Header or a Search Result, re-launch Settings as
an Activity so that we are benefiting from the Activity stack for
UP affordance and BACK button
- manage UP affordance to show it only when needed
- move some Actions to the Menu in the ActionBar for allowing space
to the Search action and removing some clutter
- fix an issue with the Index and WiFiEnabler and their cached Context
that was not updated when there was a Configuration change
- simplify the SettingsActivity code by extracting some inner classes
Change-Id: I50b5f77bb44a7fade1886114dbbc820609a5e63d
- same as for Bluetooth
- now the remembered WiFi networks names can be indexed when
WiFi is turned on
Change-Id: I904ce6a425c21ee07ce3ee8fdc0cd71ab5a18d12
- change the Index SQL model. Add a new "enabled" column.
- use that column for issuing a more restrictive search query
- change the SearchIndexProvider API to pass the "enable" state
- apply it to Bluetooth settings
- refactor the list of indexable resources (SearchIndexableResources)
Change-Id: Ic900fb27cb12a285a80d953aa1aa88f0070cd986
- define SettingsSearchIndexablesProvider as an internal
SearchIndexablesProvider
- protect access thru using android.permission.READ_SEARCH_INDEXABLES
- update WallpaperTypeSettings and WifiSettings for taking care of
the new model
- update the Dashboard for taking care about external Icons for the
search result
- update sqlite model/version for taking care about Intents
(enable launching external applications for showing the settings)
Change-Id: I2e38599327e6480f1754f52666becce0884cee9d
- introduce a new private interface "Indexable".
- refactor Wallpaper and Wi-Fi settings to support this new
interface.
- only index saved/remembered Wi-Fi networks
- also add the capability to remove some data from the Index.
Fragments that want to publish some dynamic indexable data should
implement the "Indexable" interface and provide a static final field
named "INDEX_DATA_PROVIDER" with is the Indexable.IndexDataProvider
interface for providing the data for indexing.
Thru this interface the Index can ask what are the data chuncks to
index.
Change-Id: I31e7212c87b8218efe1a8f3028147cb19e119be6
...notification does not show ON/OFF button for wifi
- the notification was launching the WifiPickerActivity which is
a PreferenceActivity, so take care of this case too.
Change-Id: I64f58d4b9f75141626bb6f0266cf2f17fbb39fc7
