Add an option to the "CA certificate" field of the EAP network
configuration menu, "Use system certificates". Choosing this option
will cause the trusted, pre-installed, system CA certificates
to be used to validate EAP servers during the authentication process.
This only applies to EAP-TLS, EAP-TTLS, and EAP-PEAP network
configurations, where the CA certificate option is available.
If the user selects "Use system certificates" and leaves the
"Domain" field empty, display a warning and prevent the
EAP network configuration from being saved. Such a configuration
would be insecure--the user should constrain the domain that
the system certificates can be used to validate.
BUG: 26879191
TEST: 1) Set up AP connected to test RADIUS server.
TEST: 2) Generate a self-signed cert (Cert 1)
TEST: 3) Use Cert 1 to sign another cert (Cert 2) with common name
"sub1.sub2.domain.com"
TEST: 4) Setup RADIUS server, and configure it to present Cert 2 to EAP peer.
TEST: 5) Build angler image with Cert 1 installed in
/system/etc/security/cacerts/
TEST: 6) Set up an AP connected to the RADIUS server to broadcast
a WPA-Enterprise network.
TEST: 7) On Angler, connect to this WPA-Enterprise network with settings:
Network name: (AP SSID)
Security: 802.1x EAP
EAP method: TLS
CA certificate: Use system certificates
Domain: domain.com
User certificate: (test certificate from RADIUS setup)
Identity: (identity used for RADIUS setup)
TEST: 8) Verify that we connect successfully to the AP.
TEST: 9) Verify that connection still succeeds if Domain is set to
"sub2.domain.com" and "sub1.sub2.domain.com".
TEST: 10) Verify that connection fails if Domain is set to
"sub0.sub1.domain.com" and "otherdomain.com".
TEST: 11) Verify that network configuration cannot be saved, and an
warning message "Must specify a domain" is displayed if Domain
is left blank in the configuration in step 7
TEST: 12) Verify that the "Do not validate" option still appears in the
CA certificate dropdown menu.
Change-Id: I346d4d301305719033b84ec4599bf3d57d9d4ee5
Previously, we did not properly load the "Do not validate"
and "Do not provide" options for the CA certificate and
User certificate EAP network configuration fields respectively
when the user previously selected these options and saved the
configuration.
Fix this by properly checking the saved CA certificate and user
certificate aliases in the saved enterprise config.
BUG: 26686071
Change-Id: If180c611f7210718cfb11c0578545b6f027827b5
TEST: Saved EAP network with the abovementioned options.
TEST: Long-pressed saved network on Wifi menu and selected "Modify Network"
TEST: "Do not validate" and "Do not provide" options are re-loaded.
Add a "domain" field that allows the user to specify a domain
suffix match for an EAP network configuration. This field
will only be available when the user specifies a CA certificate for
an EAP-PEAP, EAP-TLS, or EAP-TTLS network. Under the hood, the
value entered into this field will be passed to WPA supplicant
as the |domain_suffix_match| configuration variable.
BUG: 25180141
Change-Id: Ib69b9519f475e90e40441ddff61c80be43cf624b
TEST: On angler, domain field appears for the EAP-PEAP, EAP-TLS
TEST: and EAP-TTLS networks.
Display an explicit warning in the WiFi configuration menu if
the user selects the option to not validate the EAP server (i.e.
does not provide a CA certificate) in an EAP configuration.
BUG: 26686071
Change-Id: I73620b60defdcf40865f8c67d5de24b5dad636f8
TEST: Warning appears when the abovementioned option is selected.
Add the "Do not validate" and "Do not provide" menu
options for not providing a CA certificate and User certificate
respectively for EAP configurations.
Choosing these options are essentially equivalent to leaving
these fields alone as "(unspecified)" (when that option existed),
but now we require the user to make a conscious choice not to
provide these certificates.
BUG: 26686071
Change-Id: I4b9c07528d6d2ba3eb0787e7cfff69d05dd25679
TEST: Both the added options appear in the relevant menus.
TEST: Choosing both these added options in an EAP-TLS configuration
TEST: allows the configuration to be saved.
Disallow configuring EAP-TLS without a user certificate,
since this is probably an invalid configuration.
Also:
- change the wording of the default option for
EAP CA and user certificates from "(unspecified)" to
"Please select", to make it obvious that a choice
needs to be made to proceed.
- Fix style issues found in WifiConfigController.java by checkstyle.py.
BUG: 26686071
Change-Id: I7ccfdf40db97328e3297a03cc43033ff2428980f
TEST: Save option is grayed out when configuring EAP-TLS network
TEST: while leaving "User Certificate" left at "Please select".
SSID with multiple CA certs can only be added programmtically. However it
can still be edited in the UI by long-pressing the item when currently
connected to the network. This change makes sure the UI shows up with
meaningful indications that the SSID is configured with multiple CA certs.
Bug: 22547958
Change-Id: I5d42313efb141db521dd09ff3fbc520915b6fb79
1. Unhide MSIM APIs in TelephonyManager that already have non-MSIM equivalent
APIs public.
2. Make MSIM API naming consistent (overloaded, no suffix).
3. Unhide APIs in SubscriptionManager that are necessary for MSIM.
Bug: 26772894
Change-Id: I69471769ece56dd2d505f087d2ed3b585eb4b2d0
Moved the area info handler from CellBroadcastReceiver to
CellBroadcastAreaInfoReceiver.
bug: 25628456
Change-Id: I2c7c6bb83245fcb6d9cc7b5dce7496e906160bab
Guard against FRP attacks by keeping the persistent data block
intact, if a factory reset has been issued during SUW.
Bug: 25290269
Change-Id: Id26b4c10235ad126632b71875592a4fa70a39b24
Guard against FRP attacks by keeping the persistent data block
intact, if a factory reset has been issued during SUW.
[resolves merge conflicts with ag/808069]
Bug: 25290269
Change-Id: Id26b4c10235ad126632b71875592a4fa70a39b24
+ In BT pairing dialog, uncheck checkbox for contact sharing by default
for devices not recognized as carkits at pair time.
Bug: 23607427
Change-Id: I7f1d40d86e713e248d3c225459be4895c4f75d76
(cherry picked from commit dbc47fb262)
+ In BT pairing dialog, uncheck checkbox for contact sharing by default
for devices not recognized as carkits at pair time.
Bug: 23607427
Change-Id: I7f1d40d86e713e248d3c225459be4895c4f75d76
Block access to development settings by tapping on the build number
in "About phone". Once SUW has completed, taps will be allowed.
Bug: 25290269
Change-Id: I9b2787712237f28fba446abab15a9e1c075d0419
If device doesn't support MIDI, don't show MIDI in "Use USB for" menu
when USB cable is connected.
(Selecting MIDI will crash the Settings app.)
Change-Id: I60f4cbb6357f162fecb574cdb6766cf5ed92e78e
am: 44643bad26
* commit '44643bad268fa65d8a5d95055a8a9c2c4bf86fdf':
Further tweak to issue #issue #25371736: Don't include z-ram allocations in Android OS
am: 3b4e4dd91d
* commit '3b4e4dd91d416c93fdc0326e54469ceabb8281ab':
Further tweak to issue #issue #25371736: Don't include z-ram allocations in Android OS
Make sure the duration shown for z-ram is sane (the maximum of the
other process durations of that app).
Change-Id: I62c46b89f927b2c7c16f5c31f6910419b2bdd130
