Updating the Settings app to allow setting the value off for key
HAPTIC_FEEDBACK_INTENSITY. This setting state is also copied onto
HAPTIC_FEEDBACK_ENABLED setting, so both should be in sync after this
change.
Similar logic is applied between RING_VIBRATION_INTENSITY and
VIBRATE_WHEN_RINGING.
This will not disable the hardware feedback since that one is controlled
by a separate setting key now.
The "vibrate for calls" was also removed and the single toggle for
"vibrate first then ring gradually" was moved into the "Vibration &
haptics" page.
Bug: 185351540
Test: [HapticFeedback|NotificationVibration|RingVibration][Intensity|Toggle]PreferenceControllerTest
and manual testing of the AOSP settings app
Change-Id: I9c94cef331a1500a1272a601ba32667ca995ddab
- Show the illustration and QS tile label text
- Dynamic update popup window width by content
- Support the auto close timer API
Bug: 210353709
Test: make RunSettingsRoboTests ROBOTEST_FILTER=AccessibilityQuickSettingsTooltipWindowTest
Change-Id: I8e0d3ff4ef6a48a54ef1e80724002d2cd28d7ac3
With FDE (Full Disk Encryption), secure start-up (i.e. requiring a PIN /
pattern / password to boot the device) was incompatible with
accessibility services. Thus, the accessibility settings would ask the
user to disable secure start-up when enabling an accessibility service.
Now that FDE support has been removed in favor of FBE (File Based
Encryption), this is no longer necessary. Remove it.
Bug: 208476087
Change-Id: I5f6e512f223df63e1b4d1c181fc8b3fe683dcd5f
Some strings used in the Settings UI have "crypt_keeper" in their names,
but they aren't specific to FDE, which is no longer supported. They are
still used to report the encrypted status of the device on devices that
use FBE, or the unencrypted status of the device on devices that don't
have encryption enabled at all. Rename these strings appropriately.
Test: On Cuttlefish with and without encryption enabled, tested visiting
the "Encryption & credentials" settings.
Bug: 208476087
Change-Id: Ic63910c870837f5b37e4407ba5b3c7629e925c17
FDE support has been removed in favor of FBE, so remove the FDE settings
from the "Encryption & credentials" page of the Settings app.
For now I didn't change the way the page appears on devices that don't
use FDE; as before, it still lists "Encrypt phone", followed by either
"Encrypted" or "Phone not encrypted" with no changeable settings. Note
that the strings used for this have "crypt_keeper" in their names but
aren't specific to FDE; the next CL will rename them.
Test: On Cuttlefish with and without encryption enabled, tested visiting
the "Encryption & credentials" settings.
Bug: 208476087
Change-Id: I3ce9894291ea1f1886f21980a86a92bfce38038a
Since Android 10, new devices have been required to use FBE (File Based
Encryption) instead of FDE (Full Disk Encryption). FDE support was
already removed from system components such as init and vold.
Therefore, the CryptKeeper activity is no longer needed. Remove it.
Note: this CL only removes CryptKeeper itself, i.e. the activity which
runs at boot time on devices that are using FDE or are being encrypted
with FDE in-place. Later CLs will remove FDE-specific code from the
Settings app.
Bug: 208476087
Change-Id: I4aaf795e8cee1ff3cdd55a41c975273c8faeefa9
This adds a config resource to specify whether restricted profiles
should be offered as an option when a new user is added. This replaces
the previous check if a device is voice capable, and will be defaulted
to false.
Bug: 202854971
Test: make RunSettingsRoboTests -j40 ROBOTEST_FILTER="com.android.settings.users.UserCapabilitiesTest"
Change-Id: If090fe8d902d6521acfde8c26e801aa4fc4f5ff4
Bug: 196180536
Test: * connect to a EAP-TLS network with TOFU option
* make RunSettingsRoboTests ROBOTEST_FILTER=WifiConfigController2Test
Change-Id: I30b55d835bd073d604bddd235f2425bdc8b647af
When UserManager.DISALLOW_ADD_WIFI_CONFIG is set to true.
- Disable the "Add network" item in the Internet settings.
- Activity action API for ACTION_WIFI_ADD_NETWORKS should not be
permitted and the user shouldn’t see a prompt for approval
Bug: 203169077
Test: make RunSettingsRoboTests ROBOTEST_FILTER=NetworkProviderSettingsTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=AddAppNetworksActivityTest
Change-Id: I18d7703b5972bfbc12dca10b6432d756813abace
1. Set visible as false until completely finish the feature.
2. This preference has no action temporally, and will continually integrate features into.
Bug: 211503117
Test: manual test
Change-Id: I1404e6eca6bd8246ae844f1a287e6c4872a8fded
Add the corner radii in to be consistent with the Settings style.
Bug: 213440059
Test: manual test
Change-Id: I68edf243ae33e9bb1e39020ad7553451fad66477
-Adding the margin for bottom at dialog
-Modify the text color of summay in the list at dialog when device is
dark mode.
Bug: 212396431
Test: build pass and check the dialog UI.
Change-Id: I1ec587fd9d64ad67bbf3479c7931c0a901f572cf
item.
- Search for "always on display" and nothing appears. So we add the
search keyword for this item.
Fix: 194279416
Test: robotest and see the UI
Change-Id: Ib7d8405f34674a06e3c2437444c3de4f2343f7f1
Update "Allow 2G" toggle summary wording to be more clear regarding
the purpose of the toggle and why it may be disabled.
Bug: b/193693810
Bug: b/196183458
Test: manual & atest -c Enable2gPreferenceControllerTest
Change-Id: Iffef8f4f44105de30392c30ffd44c1d62cd066b8
button style.
The operation of the Switch is not suitable for previewing the
screen saver and will make the user confused. So we change the
style of the screen saver widget back to the button style.
Fix: 189505023
Test: manually test the screen saver
Change-Id: I4a97d91cc0b76111d4cb7b6aa202f2207ee0ca5d
Add a definition for a boolean config value that will be used by
devices to show or hide the "Safety & emergency" setting entry in
Android top-level Settings.
Bug: 205581282
Test: manual on devices in question, PTS
Change-Id: Iec838505c4eea9c0d6c5db1379f9b4651eea7778
This reverts commit dc156e77b4.
Reason for revert: New flow for magnification switch shortcut need to be fine-tuned again. Punt this flow to Android T, so revert the string.
Change-Id: Ieb48b8e3e34b96130193cf8499ff8f49e5954b1f
- Path 1 : System -> Language & Input -> App Languages -> per app
language
- path 2 : System -> Apps -> App Info -> per app language
Video: https://screencast.googleplex.com/cast/NjUyNTUzMDY0MTc5MzAyNHxjNTg2MzMwYS0yOA
Bug: 206854105
Test: local test pass
Test: atest pass
Change-Id: Ic06fa4f0c6ec68680eb828032b6e3f479b412dc4
