We are now requiring fstab v2 for android-10+ trees. You can
specify twrp flags using /etc/twrp.flags to label and
annotate partitions.
This patchset uses fs_mgr to load the super partition and build
device mapper blocks off vendor and system depending on the slot
in use. These are mapped to partitions in TWRP and allowed to
be mounted read-only. The super partition is also mapped into a
TWRP partition in order to backup the entire partition. You cannot
backup individual device mapper blocks due to the device can only
be read-only. Therefore you cannot write back to the device mapper.
Change-Id: Icc1d895dcf96ad5ba03989c9bf759419d83673a3
Rework progressbar according to AOSP, this should fix various
issues with progressbar.
From AOSP:
progress <frac> <secs>
fill up the next <frac> part of of the progress bar over <secs> seconds. If <secs> is
zero, use `set_progress` commands to manually control the progress of this segment of the
bar.
set_progress <frac>
<frac> should be between 0.0 and 1.0; sets the progress bar within the segment defined by
the most recent progress command.
Change-Id: I7f92359046288f3529cb2e98e6d54d410a248f1d
(cherry picked from commit ab16437de14fd9f1203b7e0ce82ea18eb56cae78)
This adds the option to automatically unmount the system partition
before installing a ZIP-file.
This option is enabled by default, This is usefull on SAR-devices
where system is mounted as system_root and ZIPs (i.e. Magisk)
try to unmount system instead of system_root and fail to install.
Change-Id: Id94ae658964679e23aa7fa137e07edf74ee073df
Set TW_INCLUDE_REPACKTOOLS := true
Must also have:
AB_OTA_UPDATER := true
Use magiskboot and provide GUI options to allow users to repack
their existing boot image to install TWRP (or kernels) so we can
stop having to provide installation zips for AB devices. There is
also an option to try to fix a recovery bootloop if the kernel
has been patched to always boot the ramdisk for root, etc.
You will need to pull the below repo into external/magisk-prebuilt
https://github.com/TeamWin/external_magisk-prebuilt
Change-Id: I74196cc6f095a7576d61886dc96cbc18deba9b04
Edl mode is available only on qualcomm devices and it used to fully
restore the bricked devices. I made the button available only if
TW_HAS_EDL_MODE := true like the download button. I set the edl
button to the right of the download button, so devices can support
edl button and download button. I also added the translation for
all languages.
Change-Id: I69d1058b8c050b722395c7b3da6dce1ccfbe7a91
This patchset updates all the places we touch cache on AB devices
and non AB devices so that we can write to the appropriate
location. AB devices removed the cache partition and moved it to
/data/cache.
Change-Id: I485ec205a604f1f07ceb7700ae9c4e720fd55c3e
On some devices (e.g. ASUS Zenfone) the serial number of the device
is stored in a file in the /factory partition. Consequently, the only
way to load it is using a user space application during the init
process, and to update the ro.serialno system property.
In most places, TWRP already uses the system property to get the
serial number of the device. However, when generating the device ID
used for the backup folder name it checks the boot command line
directly. On these devices, the serialno is not included on the
command line.
Add a TW_USE_SERIALNO_PROPERTY_FOR_DEVICE_ID option that enables
usage of ro.serialno for generating the device id. It is disabled
by default to avoid changing the device id on existing ports.
Change-Id: I4a2eeca883f38fdaeb1209507fd8ebe44b1b04a0
* /persist can be mounted early while TWRP is parsing the fstab so
as soon as the partition is parsed, mount and adjust the time
accordingly.
* Store a backup settings file on /persist. Having a 2nd copy of
the settings file in the /persist partition allows for early
reading of the file and adjust timezone and brightness to user
preference while still on TWRP splash.
* Add the qcom ats time offset in TWRP settings file and use it
if no better ats file is found. This will also allow devices
with a persist partition, but no ats files in it, to adjust
the time offset during early boot.
* Use /persist/time/ as Qualcomm time fix source, based on
Xuefer <xuefer@gmail.com> patch:
https://gerrit.omnirom.org/c/27265/https://gerrit.omnirom.org/c/24384/
Change-Id: I6c21538eec58d87edfb639d9ce3871f33b886c1d
* Revert: Make legacy props an option disabled by default
(reverted from commit 75aa615767)
* Instead check for ANDROID_PROPERTY_WORKSPACE in the updater-
binary to determine whether legacy property service can be
used
Change-Id: If68d5cca9a2b56edcb1c73db0474668cf46d8c91
This patch is to refactor twrpDigest using polymorphism
and inheritance to use the same call patterns for creating and
reading a digest. Now a library.
Use SHA2 from libcrypto. SHA2 is default if device has libcrypto.
Change string MD5 everywhere to use digest or Digest instead. Updated
string tags to digest. Translation will be required.
Switch out digest code into a driver class from partitionmanager.
SHA2 is better for digest creation due to decreased collision space
compared to MD5 and SHA1.
See https://en.wikipedia.org/wiki/SHA-2
Change-Id: I74b5546789990b12aa4ce2e389d25f80a3fe213f
Note: I will have to add a build flag for excluding the app later for
watches and maybe Android TV. I will also have to add support in the
tablet and watch layouts later. I will merge this for the initial roll out
to select devices and finish up later.
Change-Id: Ia4ce5522fae542afa1539b10c0691315392a19ab
Rename twrpDU.* to exclude.*
Remove global variable for du and replace with partition specific
variables.
Use separate exclusion lists for backups and wiping.
Clean up some includes
Fix some parenthesis in twrp.cpp that I messed up.
Note: twrpTarMain command line utility compiles but probably does
not work correctly yet due to not properly setting part_settings
Change-Id: Idec9c3e6a8782ba53f3420fa79ba33394f4f85fb
* Create correctly named data manager variable 'tw_install_reboot'
* Make configurable through Settings
* Remove closing tag space in theme files (not personal preference,
but should match surrounding code style)
* Fix the "two presses needed to enable" issue for the checkbox on the
install screen
Change-Id: I0ceb60b4888a672e2f0ecb5672b03cc86615621a
Provide a countdown from 5 sec for the automated reboot after install.
Include a cancel button to interrupt the process.
Change-Id: Ib5e1447918adfde45eba361c088800812b690890
* Create data manager variable for 'tw_disable_free_space'
* Make configurable through Settings
* Fix the "two presses needed to enable" issue for the checkbox on the
backup screen
* No need to capitalize every word, but do specify precedes backup
Change-Id: Id436cef13e4ca9349618420aac03862ec4e3c35e
Removing these lines allows UMS to be enabled for devices with storage lun.
The checks don't seem to make sense as they are referencing always defined strings.
Change-Id: I75df9b7db5a790807fc2b5c946b271b103326b39
Note: events.cpp is still old code renamed to cpp to make it
easier to call functions like gr_fb_width().
I had to modify AOSP fbdev code to provide a separate memory
surface for drawing to as drawing directly to the framebuffer
resulted in rendering taking about 5 times longer.
I also modified AOSP adf code to provide a separate memory surface
for drawing for the same performance reasons. The Nexus 9 supports
adf graphics.
Overlay graphics work on at least one device. Overlay provides a
separate memory buffer already so performance is good.
I do not have a drm device yet that I know of. I made some attempt
to update the drm code to determine the correct pixel format based
on the drm graphics format, but what is available in pixel flinger
and what is available in drm do not line up all that well. Reports
are that the Pixel C is using drm graphics, but performance is
slow, likely due to the use of a mmap instead of a memory buffyer.
Change-Id: Ibd45bccca6ac2cb826037aa9b2aa5065cf683eed
-Detects, decrypts, and mounts an adopted SD card if a
secondary block device is defined (usually mmcblk1)
-Handles unified storage
-Displays the adopted storage in MTP along with internal
-Factory Reset - wiped just like a data media device, we
retain the keys folder and the storage.xml during a
factory reset
-Backup / Restore
-Disable mass storage when adopted storage is present
-Read storage nickname from storage.xml and apply it to
display names in the GUI
-Read storage.xml and determine what storage location is in
use for /sdcard and remap accordingly
libgpt_twrp is source code mostly kanged from an efimanager
project. It is GPL v2 or higher, so we will opt for GPL v3.
Change-Id: Ieda0030bec5155ba8d2b9167dc0016cebbf39d55
If we can detect the directory, why don't we detect maximum as well?
Additional patch by: Matt Mower
Replace clunky /nobrightness handling
Cleanup TWFunc::Set_Brightness() and blanktimer::getBrightness() a
bit, primarily for the purpose of relying on the value in
tw_has_brightnesss_file instead of checking for a phony brightness
path.
Change-Id: Ib22595df53cefa8db7a1172a581984c42ad461c6
-Improve code for partitioning sdcards
-Allow user to select a device for partitioning (must be removable)
-Use sgdisk to partition sdcards
-Set default sizes for ext and swap to 0
-Change increments for ext to 256MB and swap to 64MB
Note: sgdisk is included in 6.0. I have included a static prebuilt
sgdisk for trees that do not have sgdisk, however the prebuilt
sgdisk is a decent bit larger than the old parted binary. The old
parted binary is quite old at this point and we only have it for
armv7a. sgdisk should be maintained by AOSP and can be built from
source so it should work across architectures.
Change-Id: Ib80882d9b5776e5e9358b11340fba392e6f1ae09
This lets user set the default brightness so user doesn't cook
their phone on first boot or loss of settings file, while
still maintaining the ability to turn brightness to max if
desired.
Change-Id: Ia801fba46014335148ec573a0b0bbdf0a3ca60ae
This is similar to https://gerrit.omnirom.org/#/c/14014
A lot of the features built in the older patch set have been split
out into separate patches, most of which have already been merged.
The remaining functionality here should all be directly related to
language selection and loading. We always load English as a base
before loading other languages over the top of the base. The idea
is that if another language is missing a translation, then we will
still display the English.
Maybe still to do: read the /cache/recovery/last_locale file and
load a language based on that. For me, this file contains just:
en_US
We probably won't bother with region specific translations so we
would have to look at either trimming off the _US or using some
other method like perhaps a symlink or a combination of the two.
Thanks to _that for twmsg.cpp class
Change-Id: I9647a22e47883a3ddd2de1da51f64aab7c328f74
In order to maintain compatibility with older trees, we now have
minadbd.old and minui.old. I had to use a TARGET_GLOBAL_CFLAG to
handle ifdef issues in minui/minui.d because healthd includes
minui/minui.h and there was no other alternative to make minui.h
compatible with older trees without having to modify healthd rules
which is outside of TWRP.
Note that the new minui does not currently have support for qcom
overlay graphics. Support for this graphics mode will likely be
added in a later patch set. If you are building in a 6.0 tree and
have a device that needs qcom overlay graphics, be warned, as off
mode charging may not work properly. A dead battery in this case
could potentially brick your device if it is unable to charge as
healthd handles charging duties.
Update rules for building toolbox and add rules for making toybox
Use permissive.sh in init.rc which will follow symlinks so we do
not have to worry about what binary is supplying the setenforce
functionality (toolbox, toybox, or busybox).
Fix a few warnings in the main recovery binary source code.
Fix a few includes that were missing that prevented compiling in
6.0
Change-Id: Ia67aa2107d260883da5e365475a19bea538e8b97
Fix factory reset now properly formats data as expected
Change text for ORS processing
Disable system read only check, SuperSU, and patch system
Stop copying fstab and version to cache
Change-Id: I20f5cae390afbb8d2d88e01b8d9b9bf4ff0fdea1
Initial value for tw_mount_system_ro is now 2. If the value of
tw_mount_system_ro is 2 during boot, then we will show the system
read only prompt and ignore the value from the lifetime writes
check.
Note: Changed the value of FILE_VERSION which will trigger the
data manager to throw out previous settings and start with default
values so that existing TWRP users will get the prompt at least
once.
Change-Id: I447767b64617f855156a19a5dc15c4ece6dff7b8
* If TW_USE_MODEL_HARDWARE_ID_FOR_DEVICE_ID is defined:
- provide the header that defines property functions/constants
- actually look for hardware_id before attempting to append it
* Perform string length checks rigorously.
* Only perform newline removal if string is used before sanitization.
* Copy changes to htcdumlock, but rely on cmdline only.
ps3: fix merge conflict in data.cpp includes
Change-Id: I720d3bc8416758f5f83782e8bc298b32eda1a573
Otherwise, recovery log gets filled up with
"I:Cannot find file /sys/class/thermal/thermal_zone0/temp"
This also fixes build warnings due to duplicate definition of TW_NO_CPU_TEMP.
Change-Id: Ib7fdcd103d6684249c38c8b14ec85f2faba158f6
Mounting system as rw can prevent future OTA updates. The purpose
of this patch set is to prevent TWRP from mounting sytem as rw on
the first boot. Device maintainers should update their twrp.fstab
files on these devices to include an additional line:
/system_image emmc /dev/block/../system
This line will allow TWRP to create a raw system image backup to
ensure that the user can return to an original state for future
OTA updates.
Change-Id: I8929d85bc3a5b96cc564bc7f734b58d5612ec833
The strings were updated in https://gerrit.omnirom.org/12827 but the
default values where accidentally forgotten.
Change-Id: I423f315cd9509fc61f14bfe4c13a28fbc2722315
- get rid of separate thread, check timer in rendering thread instead
- use an enum for the blanking state instead of magic integers
- move #ifdefs for TW_NO_SCREEN_TIMEOUT inside blanktimer class
- move some #includes and enum TOUCH_STATE to pages.hpp
Change-Id: Id4b104e3680dc5db41d8ba85e32d722cf4086299
Files and folders that we create during backups, copy log, or MTP
operations often do not have the proper uid/gid/contexts assigned.
We will attempt to read the proper contexts from the settings
storage path and assign those same contexts to any files or dirs
that we create.
Change-Id: I769f9479854122b49b499de2175e6e2d026f8afd
