-Improve code for partitioning sdcards
-Allow user to select a device for partitioning (must be removable)
-Use sgdisk to partition sdcards
-Set default sizes for ext and swap to 0
-Change increments for ext to 256MB and swap to 64MB
Note: sgdisk is included in 6.0. I have included a static prebuilt
sgdisk for trees that do not have sgdisk, however the prebuilt
sgdisk is a decent bit larger than the old parted binary. The old
parted binary is quite old at this point and we only have it for
armv7a. sgdisk should be maintained by AOSP and can be built from
source so it should work across architectures.
Change-Id: Ib80882d9b5776e5e9358b11340fba392e6f1ae09
CM-13 tree completely changes the names of the binaries that are created
for ntfs-3g. If we are using a CM-13 tree (CM SDK 4) make sure the
dependencies and relinking are adjusted accordingly.
Also, adapt partition code so it can make use of whichever set of
binaries are present.
Change-Id: I810caafa818f18281fd29dcf8f31b3053133b5ed
* Usage of fsck.exfat is already included in partition.cpp, but the
tool is missing.
* Update the path to mkexfatfs so the button is available when changing
filesystem.
Change-Id: I5f4e27357c6b5a8606043d1bdc2488cc83e55d90
* Make sure fsck.f2fs and mkfs.f2fs are built for CM12.1/13.0
* Add CM13.0 rule for relinking mkfs.f2fs
* Minor cleanup of nested if/else in prebuilts
Note on CM SDKs: 3=cm-12.1, 4=cm-13.0
I'm not yet sure whether it is possible that the CMSDK increments
within the same branch of CM.
Change-Id: I7b521159a8b5d0e0ea639f5e0fdd885100612df0
* Version 3.0.28
* Update filenames in source
* Remove unnecessary symlink to fsck
* Commit "Recode short filenames from DOS codepage (default 437)." has
been reverted since we do not have access to iconv
* Commits cherry-picked on top of 3.0.28:
- mkfs.fat: fix incorrect int type
- Prevent out of bound array read in date_dos2unix()
Change-Id: I50310235c62ec2e6bc90afcd10f2814d3afb5113
In order to maintain compatibility with older trees, we now have
minadbd.old and minui.old. I had to use a TARGET_GLOBAL_CFLAG to
handle ifdef issues in minui/minui.d because healthd includes
minui/minui.h and there was no other alternative to make minui.h
compatible with older trees without having to modify healthd rules
which is outside of TWRP.
Note that the new minui does not currently have support for qcom
overlay graphics. Support for this graphics mode will likely be
added in a later patch set. If you are building in a 6.0 tree and
have a device that needs qcom overlay graphics, be warned, as off
mode charging may not work properly. A dead battery in this case
could potentially brick your device if it is unable to charge as
healthd handles charging duties.
Update rules for building toolbox and add rules for making toybox
Use permissive.sh in init.rc which will follow symlinks so we do
not have to worry about what binary is supplying the setenforce
functionality (toolbox, toybox, or busybox).
Fix a few warnings in the main recovery binary source code.
Fix a few includes that were missing that prevented compiling in
6.0
Change-Id: Ia67aa2107d260883da5e365475a19bea538e8b97
Note: Only works on ext2/3/4 partitions. Only tested on ext4.
We can use this in some cases to resize the data partition if an
incorrect fstab caused recovery to not reserve the 16KB for a
crypto footer.
Sometimes the BoardConfig for a custom ROM does not have the
correct size for the system partition and if the ROM flashes a
raw system image, that image will not take up the full block
device. Running resize2fs can fix the size and may allow more
room in the system partition for customizations like busybox or
a larger gapps package.
Sometimes flashing a factory image may flash userdata with an
image with a file system that does not take up the full size of
the block device (e.g. factory images for the Nexus 6 will flash
userdata with a ~24GB userdata image, wasting ~30GB of space).
Using resize2fs we can easily fix this issue without having to do
a full format data.
Change-Id: I631f5c6f567bbc6a9241e5dd95f1e435820a1b13
Also add a short while loop to wait for fb0 to be created as was
needed on the x86-64 target for the Android emulator.
Change-Id: Ib1b87bea028ac3eac0541283334a0157cdfbce11
AOSP and other ROM trees now do a rm -rf of the res folder during
the ramdisk creation process that removes the TWRP resources.
Using /twres instead of /res works around this issue making TWRP
more compatible with AOSP and other build trees.
Change-Id: I0d4c7e06ca381ac5aa0069b6f2b8c47f7dec49e7
* Bionic tries to load it, and if it isn't in /sbin and /system
is mounted, it loads it from there and prevents it from unmouting
Change-Id: I33d0b6ba4503f2822d96033fa26d53e10b8ce1c5
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
Break libblkid into 4 libraries: libblkid, libuuid, libutil-linux and libfdisk.
This should help in later patch updates.
Change-Id: I680d9a7feb031e5c29a603e9c58aff4b65826262
The SuperSU install process is getting rather complicated, so we
will modify the install script slightly and use it to install
all the things and stop trying to check to see if root permissions
have been lost like we used to do.
Change-Id: Ibdb64c909d2bd16e12bb35b4f31f572cc29add47
The new minzip did not compile in older trees due to needing
mmap64. For older trees we will just use mmap instead. Remove all
files and code pertaining to minzipold. Updater should now build
properly in older trees as well.
Eliminate use of PLATFORM_VERSION in favor of PLATFORM_SDK_VERSION
which should be more consistent and reliable.
Change-Id: I38d2b604a73d1b17a2072c7d60e990b81ece0c10
Trim cryptfs.c to remove functions that TWRP does not use for
decrypt and remove the need for libfs_mgr from cryptfs.c by
passing some items to cryptfs.c from the partition manager.
Add support for new fstab flags:
encryptable and forceencrypt=/path/to/cryptokey
For example:
flags=forceencrypt=/dev/block/platform/sdhci-tegra.3/by-name/MD1
Note that "footer" is the default, so you do not need to set this
flag on devices that use the footer for the crypto key.
Also add mounttodecrypt if you need to mount a partition during
the decrypt cycle for firmware of proprietary libs.
Clean up decrypt and only support one version
Android 5.0 lollipop decrypt should be backwards compatible with
older versions so we will only support one version, 1.3 that came
with 5.0 lollipop.
Remove support for Samsung TouchWiz decrypt. It does not work with
the latest versions of Samsung encryption anyway and it has not
been updated to work with any AOSP decryption higher than 1.1
Change-Id: I2d9c6e31df50268c91ee642c2fa090f901d9d5c9
Migrate previous minzip to minzipold replacing the existing
minzipold. This will break compatibility with trees that do not
support selinux (ICS and older). Migrate former verifier files to
verifierold.
Add fuse.h to recovery source because older trees do not have it.
Add LOCAL_MODULE_TAGS where needed for 4.1 tree.
Change-Id: Iade57cb2b0115af7fce9f56aa98636b1744a1ef4
Some devices may need additional binaries or libs that TWRP
normally does not need included in /sbin
Use TW_RECOVERY_ADDITIONAL_RELINK_FILES to build them from source
and get them added to the recovery ramdisk.
For example, Nexus 9 needs libc++ included in order to decrypt
the data partition. The following will build it from source and
include it in TWRP:
TARGET_RECOVERY_DEVICE_MODULES := libc++
TW_RECOVERY_ADDITIONAL_RELINK_FILES := \
out/target/product/volantis/system/lib/libc++.so
Change-Id: I147c0d5569c83514d2e50226ecc50e80bf8aac36
Kang in cryptfs.c and cryptfs.h from vold.
Use TW_INCLUDE_L_CRYPTO := true to enable.
Ramdisk must contain the normal fstab file in the root in the
usual format of:
fstab.{ro.hardware}
For examble for Nexus 5:
fstab.hammerhead
Or on many Qualcomm devices:
fstab.qcom
Tested against Android 5.0 lollipop on Nexus 7 2012 grouper. Not
sure if or how this will work when we are dealing with a device
with a hardware keystore. Long term we need to add a GUI element
to allow entering a pattern. For now you can decrypt a pattern
unlock by converting the dots to numbers in the following format:
123
456
789
So an upper-case L would translate to 14789 as a password entered
on the keyboard.
Change-Id: I02c29e1f1c2eb29bf002c9fe0fc118357300b5b3
-Remove dosfstools for arm64 until we can make it compile
-Fix TW_USE_TOOLBOX flag to work again
-Fix symlinking and handling of sh when using mksh
-Fix legacy properties to find futex_wake function
-Fix libcrecovery to not use bsd_signal anymore
-Fix rules for building with regards to libcrecovery
-Update toolbox_recovery rules to compile tools in lollipop
-Fix a few compile errors specific to arm64
Testers report that TWRP does not boot on Nexus 9 and we fail to
get a shell for adb shell. At least it compiles without errors.
Change-Id: I286be8628defb60cc527b8a548c0bdfcb0ebb574
Update makefiles to no longer rely on INTERNAL_RECOVERY_FILES. Define
LOCAL_ADDITIONAL_DEPENDENCIES instead.
Set LOCAL_LDFLAGS to properly link recovery executable.
Change-Id: I4542104c69399b5a19674b9772ab89c3709efa72
* Keeps original font system in place
* Uses the same API as original font system:
- You can render only one line at a time
- You can only use one font and color for one gr_text* call
* Caches all rendered text, with a string cache limited to 400
entries, then it trucates to 250, which results in memory
usage hovering around 5-10MB
Change-Id: I36107b9dcd8d57bae4486fce8b8f64e49ef3d906
Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
Allows sending openrecoveryscript commands to TWRP via shell.
This may be handy for visually impaired users, for various one
click utilities to drive TWRP commands from a computer, for using
TWRP when a catastrophic hardware failure like a shattered screen
prevents you from being able to use touch, or even on devices like
a TV stick where touch and USB mouse input is unavailable.
This patch also includes a few minor changes to openrecoveryscript
including proper support for rebooting via the script and for
decrypting the device via the command line.
Change-Id: I796ad168efdd2da9c25334ac93d1079daaa7b0bc
