This function has become obsolete since we've removed file-based OTA
support (it was needed by 'delete_recursive' edify function earlier).
Test: mmma -j bootable/recovery
Test: Code search shows no active user of the function.
Change-Id: If6faaa759d4c849b79acba4e6adb82baadc89f7a
This is to cover the code added by commit
5a1dee01df, where an O update_verifier
should not reject N care_map.txt.
Bug: 63544345
Test: recovery_component_test passes on marlin.
Change-Id: Ia944e16cba3cc635098b3ffd92842d725b570fec
receive_new_data may exit too early if the zip processor has sent all
the raw data. As a result, the last few 'new' commands will fail even
though the brotli decoder has more output in its buffer.
Restruct the code so that 'NewThreadInfo' owns the decoder state solely;
and receive_brotli_new_data is responsible for the decompression.
Also reduce the test data size to 100 blocks to avoid the test timeout.
Bug: 63802629
Test: recovery_component_test. on bullhead, apply full updates with and
w/o brotli compressed entries, apply an incremental update.
Change-Id: I9442f2536b74e48dbf7eeb062a8539c82c6dab47
Add a new writer that can decode the brotli-compressed system/vendor
new data stored in the OTA zip.
Brotli generally gives better compression rate at the cost of slightly
increased time consumption. The patch.dat is already compressed
by BZ; so there's no point to further compress it.
For the given 1.9G bullhead system image:
Size: 875M -> 787M; ~10% reduction of package size.
Time: 147s -> 153s; ~4% increase of the block_image_update execution time.
(I guess I/O takes much longer time than decompression.)
Also it takes 4 minutes to compress the system image on my local
machine, 3 more minutes than zip.
Test: recovery tests pass && apply a full OTA with brotli compressed
system/vendor.new.dat on bullhead
Change-Id: I232335ebf662a9c55579ca073ad45265700a621e
In a rare case, a random chunk will pass both the gzip header check
and the inflation process; but fail the uncompressed length check in the
footer. This leads to a imgdiff failure. So, we should treat this chunk
as 'normal' instead of 'inflated' while generating the patch.
Bug: 63334984
Test: imgdiff generates patch successfully on previous failing images.
Change-Id: Ice84f22d3653bce9756bda91e70528c0d2f264a0
package_extract_dir() was removed in go/aog/402383, and the
corresponding UpdaterTest should be removed as well.
Bug: 62918308
Test: mma && code search
Change-Id: Ibe9c473a5d41d2fa4d26abca5684e71b104891b0
When using AVB, PRODUCT_SUPPORTS_VERITY is not set so check for
BOARD_ENABLE_AVB as well. Also AVB sets up the root filesystem as
'vroot' so map that to 'system' since this is what is
expected. Managed to test at least that the code is at least compiled
in:
$ fastboot --set-active=_a
Setting current slot to 'a'...
OKAY [ 0.023s]
finished. total time: 0.023s
$ fastboot reboot
rebooting...
finished. total time: 0.050s
$ adb wait-for-device
$ adb logcat |grep update_verifier
03-04 05:28:56.773 630 630 I /system/bin/update_verifier: Started with arg 1: nonencrypted
03-04 05:28:56.776 630 630 I /system/bin/update_verifier: Booting slot 0: isSlotMarkedSuccessful=0
03-04 05:28:56.776 630 630 W /system/bin/update_verifier: Failed to open /data/ota_package/care_map.txt: No such file or directory
03-04 05:28:56.788 630 630 I /system/bin/update_verifier: Marked slot 0 as booted successfully.
03-04 05:28:56.788 630 630 I /system/bin/update_verifier: Leaving update_verifier.
Bug: None
Test: Manually tested on device using AVB bootloader.
Change-Id: I13c0fe1cc5d0f397e36f5e62fcc05c8dfee5fd85
This will help us to identify the patch corruption.
Meanwhile fix a wrong size parameter passed to bspatch.
(patch->data.size() into patch->data.size() - patch_offset).
Also remove the only usage of "ApplyBSDiffPatchMem()" and inline its
Sink function for simplicity.
Bug: 37855643
Test: Prints SHA1 for corrupted patch in imgdiff_test.
Change-Id: Ibf2db8c08b0ded1409bb7c91a3547a6bf99c601d
This allows writing native tests for non-A/B update_binary_command().
Prior to this CL, it was extracting the updater to a hard-coded
location (/tmp/update_binary) that's not available under the test
environment.
Test: recovery_component_test on angler and marlin respectively.
Test: Sideload OTA packages on angler and marlin respectively.
Change-Id: I78b9cc211d90c0a16a84e94e339b65759300e2a8
run_fuse_sideload() is passing the block size as the max_read
option, so it will only handle a request that involves at most two
blocks at a time. However, the minimal allowed value was set to 1024
prior to this CL, which is inconsistent with the kernel code
(fs/fuse/inode.c) that sets it to the greater of 4096 and the passed-in
max_read option. This would fail the calls with a block size / max_read
less than 4096 due to the wrongly computed block indices.
Note that we didn't observe real issue in practice, because we have been
using 64 KiB block sizes for both of adb and sdcard sideload calls. The
issue only shows up in my local CL (to come later) that uses 1024 block
size in run_fuse_sideload() tests.
Test: recovery_component_test
Test: adb sideload with the new recovery image on angler
Change-Id: Id9f0cfea13d0d193dcb7cd41a1553a23739545f2
The SpaceMode (applypatch -s) was used in amend script (cupcake) only,
which has been removed since commit
9ce2ebf5d300eba5f6086583b0941ef68a3e4b42 (platform/build). The later
(and current) edify script uses apply_patch_space().
Note that other modes (PatchMode, CheckMode) of applypatch executable
are mostly used by install-recovery.sh script.
Test: No active user of "applypatch -s".
Test: recovery_component_test
Change-Id: I1d689b7fedd3884077e88ed1d6c22f7a2198859d
ApplyPatchFullTest and ApplyPatchDoubleCacheTest were used for defining
testcases for file-based OTA. The testcases have already been removed by
commit 40e144dae8. This CL removes the
obsolete class defnitions.
Bug: 37559618
Test: recovery_component_test on angler and marlin respectively.
Change-Id: I3f4f1dfc8580cf010365e671de256f68bbc0d99a
This now covers the actual calls to libvintf, and asserts we're getting
identical results through verify_package_compatibility() and by calling
libvintf directly.
We were missing the coverage and introduced the double free bug (fixed
by commit f978278995).
Bug: 37413730
Test: recovery_component_test passes.
Test: recovery_component_test fails w/o commit
f978278995.
Change-Id: If5195ea1c583fd7c440a1de289da82145e80e23c
The libvintf API has landed. Hook up to do the actual verification.
Bug: 36597505
Test: recovery_component_test
Test: m recoveryimage; adb sideload on angler and sailfish, with
packages that contain dummy compatibility entries.
Test: m recoveryimage; adb sideload on angler and sailfish, with
packages that don't contain any compatibility entries.
Change-Id: Idbd6f5aaef605ca51b20e667505d686de5ac781f
(cherry picked from commit da320ac6ab)
The libvintf API has landed. Hook up to do the actual verification.
Bug: 36597505
Test: recovery_component_test
Test: m recoveryimage; adb sideload on angler and sailfish, with
packages that contain dummy compatibility entries.
Test: m recoveryimage; adb sideload on angler and sailfish, with
packages that don't contain any compatibility entries.
Change-Id: Idbd6f5aaef605ca51b20e667505d686de5ac781f
Expose update_binary_command() through private/install.h for testing
purpose.
Also make minor clean-ups to install.cpp: a) adding more verbose logging
on ExtractToMemory failures; b) update_binary_command() taking
std::string instead of const char*; c) moving a few macro and global
constants into update_binary_command().
Bug: 37300957
Test: recovery_component_test on marlin
Test: Build new recovery and adb sideload on angler and sailfish.
Change-Id: Ib2d9068af3fee038f01c90940ccaeb0a7da374fc
Merged-In: Ib2d9068af3fee038f01c90940ccaeb0a7da374fc
(cherry picked from commit bc4b1fe4c4)
Expose update_binary_command() through private/install.h for testing
purpose.
Also make minor clean-ups to install.cpp: a) adding more verbose logging
on ExtractToMemory failures; b) update_binary_command() taking
std::string instead of const char*; c) moving a few macro and global
constants into update_binary_command().
Bug: 37300957
Test: recovery_component_test on marlin
Test: Build new recovery and adb sideload on angler and sailfish.
Change-Id: Ib2d9068af3fee038f01c90940ccaeb0a7da374fc
verify_package_compatibility() is added to parse the compatibility entry
(compatibility.zip) in a given OTA package. If entry is present, the
information is sent to libvintf to check the compatibility.
This CL doesn't actually call libvintf, since the API there is not
available yet.
Bug: 36597505
Test: Doesn't break the install with existing packages (i.e. w/o the
compatibility entry).
Test: recovery_component_test
Change-Id: I3903ffa5f6ba33a5c0d761602ade6290c6752596
(cherry picked from commit 62e0bc7586)
Tao Bao
Tianjie Xu
David Zeuthen
Treehugger Robot