Only run Update_System_Details on boot after decryption is
complete, if device is unencrypted, or if decryption prompt
is cancelled.
This significantly decreases the delay in reaching the
decryption prompt on devices with large used storage
capacity
Use refreshsizes action to update system details when
Cancel button is pressed at decryption prompt
Change-Id: I9e436b1c57664a5269f42dc1cda4f6097f7e3062
* Now We can open terminal from current directory in filemanager
Signed-off-by: Mohd Faraz <androiabledroid@gmail.com>
Change-Id: I6df9ee1222c1fa24105da1002abe3c180be2ded1
Signed-off-by: AndroiableDroid <mohd.faraz.abc@gmail.com>
In this patchset we will store and reset the android system
root context after a wipe and restore to prevent issues
with no context labels in the file_contexts being applied.
This will prevent no boot issues in android with selinux
denials on the system root partition.
Change-Id: I87fd3a6060fbaa3e7bdfd7a4b1d09feeb4fa3f27
(cherry picked from commit 35d2bfda3c89ebd212a9bd2328bffd7464f95d47)
We introduce a new XML element prfxfilter for file name prefix
filtering, e.g. Magisk- .
The file is first matched against the list of extensions and, if there's
no match, then matched against the list of prefixes. An extension or
prefix may be equal to the whole filename.
Change-Id: I46a985c7298799793911948bc74296bebb306d9e
Add option to install TWRP app as a list menu item on the
advanced page and as a button on the reboot page (except for
watch theme). Now when a user reboots the device, they no longer
will be prompted to install the TWRP app, which interrupts the
flow of rebooting the device.
Change-Id: I00559d0be6e7d0b00d469a5960e4b14e32a3fc5f
The Rescue Party trigger manifests itself when a user is trying to boot
a ROM but keeps getting dumped back to recovery.
Normally, TWRP doesn't capture this, and the user is often wondering
what is happening. This patch captures the trigger and presents a clear
message to the user about what is going on (with options of how to
resolve the situation).
Change-Id: Ia4414ce6270a7ee9e54d14381990ca4766e757bd
* Add CLI support using the command "twrp decrypt <PASSWORD> [USER ID]"
* Add GUI support using the menu Advanced --> Decrypt User
multiuser: Parse users only when Decrypt_DE runs successfully
multiuser: Warn when not all users are decrypted
Change-Id: Ia5e943b13c2d5ec5c34ae97661133c19ff471e6d
fastbootd is a userspace daemon that runs in the recovery
ramdisk. It allows writing single partitions to the super
partition via fastboot CLI. When TWRP sees the fastboot option
in the misc partition during startup, it will start with
the fastbootd page and fastbootd running. Otherwise it will
run recovery normally.
Change-Id: Id7b12d29ef21dbd5950dc884dd1cd788f25357f0
* Added all missing strings
* Translated some English strings in the German language file
* Changed ZIP notation to "ZIP" to be consistent in the translation
Change-Id: I27812c7f79c95258363772481f71253b8b505e28
(cherry picked from commit 6c70991a72820b390185b6de923a3694dce3cf44)
fscrypt aosp doc: https://source.android.com/security/encryption/file-based
kernel fscrypt doc: https://www.kernel.org/doc/html/v4.18/filesystems/fscrypt.html
This commit implements the ability for TWRP to use fscrypt to decrypt
files on the fscrypt implementation. It has been implemented mostly
in a new successor library to e4crypt called libtwrpfscrypt. Most of the
code was ported from AOSP vold.
Notable updates include:
- updated policy storage by libtar
- lookup of fbe policies by libtwrpfscrypt
- threaded keystore operations
Big thanks to Dees_Troy for the initial trailblazing
of encryption in TWRP.
Change-Id: I69cd2eba3693a9914e00213d4943229635d0cdae
This function will automatically decrypt .ozip file in a .zip and it will
save the .zip in the same folder of the .ozip and with the same name.
After the decryption, the flash will start.
To enable this function you have to set a Boardconfig flag with the
decryption key like i did here:
a30625f80a
Original projects:
https://github.com/sabpprook/ozip2ziphttps://github.com/bkerler/oppo_ozip_decrypt
Change-Id: Ic93243a565008c442bcf2992069b2801532ac7c1
(cherry picked from commit 0ff59845f2f8dddedb4cee9a9faf86a6294cce66)
We are now requiring fstab v2 for android-10+ trees. You can
specify twrp flags using /etc/twrp.flags to label and
annotate partitions.
This patchset uses fs_mgr to load the super partition and build
device mapper blocks off vendor and system depending on the slot
in use. These are mapped to partitions in TWRP and allowed to
be mounted read-only. The super partition is also mapped into a
TWRP partition in order to backup the entire partition. You cannot
backup individual device mapper blocks due to the device can only
be read-only. Therefore you cannot write back to the device mapper.
Change-Id: Icc1d895dcf96ad5ba03989c9bf759419d83673a3
This reverts commit 0b25b1d79b.
Reason for revert: Changes need to be made to libtwrpfscrypt to include this patchset. Will cherry-pick this patch later and make necessary modifications.
Change-Id: I7601d7b820129709b05d9b4368573b6f1048de02
* Add CLI support using the command "twrp decrypt <PASSWORD> [USER ID]"
* Add GUI support using the menu Advanced --> Decrypt User
Change-Id: Id2681bc2b1012a0571417f7a6e0b980b1b25c61c
(cherry picked from commit 5a79f67a1b1bd1bcadeca0a4896a871646652534)
Users may want to reboot to recovery or bootloader after flashing
A/B zips to switch slots and install additional zips.
Change-Id: I128ceff6d0b361921c7ad7623eab93044e942d18
(cherry picked from commit 90df3de75ef05e014ba363d65a59421a04375e5a)
Also inform user, that a reboot is required to switch slots
Change-Id: I7d609ee3d231e5d38d9145962e979e012d9a0ac8
(cherry picked from commit 5343a3ca2afcdd895677c5c3ff16a83af372c7b7)
This adds the option to automatically unmount the system partition
before installing a ZIP-file.
This option is enabled by default, This is usefull on SAR-devices
where system is mounted as system_root and ZIPs (i.e. Magisk)
try to unmount system instead of system_root and fail to install.
Change-Id: Id94ae658964679e23aa7fa137e07edf74ee073df
This allows flame to boot TWRP. Still will need to work on
super partition for vendor and system access.
The plan will be to cherry-pick any updates to android-9.0
through gerrit.twrp.me to this branch as a WIP.
* All missing strings added (ref: en.xml).
* Many strings clarified and ambiguity removed.
* Inconsistent use of language reconciled.
* XML validated by xmllint(1).
* String length validated on device (G975F).
Change-Id: I4a4c3dc5a1147a62b8c141286fc7ac432678a322
This is need to avoid overlapping between the third row of buttons and
the current active slot, actually if you enable edl button, the active
slot will overlap the button.
Change-Id: I6cfc945c2d0be0530dad7b4ce0f0e2ca29c297c4
Set TW_INCLUDE_REPACKTOOLS := true
Must also have:
AB_OTA_UPDATER := true
Use magiskboot and provide GUI options to allow users to repack
their existing boot image to install TWRP (or kernels) so we can
stop having to provide installation zips for AB devices. There is
also an option to try to fix a recovery bootloop if the kernel
has been patched to always boot the ramdisk for root, etc.
You will need to pull the below repo into external/magisk-prebuilt
https://github.com/TeamWin/external_magisk-prebuilt
Change-Id: I74196cc6f095a7576d61886dc96cbc18deba9b04
This patch allows items to have more than one action surrounded
by the <actions> tags like other GUI elements. The patch also
adds new twrp command line options that let you reload the theme
and switch to a specific page from the command line:
adb shell twrp reloadtheme
adb shell twrp changepage=advanced
Change-Id: I838ea380a508be07b9fa617034d1954e116febd6
Edl mode is available only on qualcomm devices and it used to fully
restore the bricked devices. I made the button available only if
TW_HAS_EDL_MODE := true like the download button. I set the edl
button to the right of the download button, so devices can support
edl button and download button. I also added the translation for
all languages.
Change-Id: I69d1058b8c050b722395c7b3da6dce1ccfbe7a91
This patchset updates all the places we touch cache on AB devices
and non AB devices so that we can write to the appropriate
location. AB devices removed the cache partition and moved it to
/data/cache.
Change-Id: I485ec205a604f1f07ceb7700ae9c4e720fd55c3e
