This library will need to mirror AOSP for any changes to installing
packages. The library has been separated out in order to make importing
updates from AOSP into the TWRP project.
twinstall.cpp has been removed from the recovery binary and added to
this library. It has been refactored for libziparchive.
Sideload has been reworked to use the newer methods from AOSP on
flashing packages through adb sideload.
We are also removing old libraries for adb and verifier.
Lastly before flashing a zip or image, we want to unlock block devices
for writing so that when an OTA is flashed to the inactive slot,
the flash will succeed.
Change-Id: I6d8702fc9031ffaf9f666b4ba375dc7d9362e473
* Add CLI support using the command "twrp decrypt <PASSWORD> [USER ID]"
* Add GUI support using the menu Advanced --> Decrypt User
multiuser: Parse users only when Decrypt_DE runs successfully
multiuser: Warn when not all users are decrypted
Change-Id: Ia5e943b13c2d5ec5c34ae97661133c19ff471e6d
fastbootd is a userspace daemon that runs in the recovery
ramdisk. It allows writing single partitions to the super
partition via fastboot CLI. When TWRP sees the fastboot option
in the misc partition during startup, it will start with
the fastbootd page and fastbootd running. Otherwise it will
run recovery normally.
Change-Id: Id7b12d29ef21dbd5950dc884dd1cd788f25357f0
This patchset is now exlcuding /data/cache from backup, and removing it
from the wipe exclusion list to prevent errors on restore and wiping
/data.
This patchset changes the directory from /data/cache to /data/recovery for TWRP
to store logs and other file information. This will help with AB
devices that don't want recovery to mess with /data/cache.
This patchset will make ORS use /data/cache for AB devices.
Remove policy code because we don't need to set a policy for the
recovery directory.
Change-Id: I1d140276314fd34804a72297d6e25a52e58210a0
We are now requiring fstab v2 for android-10+ trees. You can
specify twrp flags using /etc/twrp.flags to label and
annotate partitions.
This patchset uses fs_mgr to load the super partition and build
device mapper blocks off vendor and system depending on the slot
in use. These are mapped to partitions in TWRP and allowed to
be mounted read-only. The super partition is also mapped into a
TWRP partition in order to backup the entire partition. You cannot
backup individual device mapper blocks due to the device can only
be read-only. Therefore you cannot write back to the device mapper.
Change-Id: Icc1d895dcf96ad5ba03989c9bf759419d83673a3
This reverts commit 0b25b1d79b.
Reason for revert: Changes need to be made to libtwrpfscrypt to include this patchset. Will cherry-pick this patch later and make necessary modifications.
Change-Id: I7601d7b820129709b05d9b4368573b6f1048de02
* Add CLI support using the command "twrp decrypt <PASSWORD> [USER ID]"
* Add GUI support using the menu Advanced --> Decrypt User
Change-Id: Id2681bc2b1012a0571417f7a6e0b980b1b25c61c
(cherry picked from commit 5a79f67a1b1bd1bcadeca0a4896a871646652534)
This reverts commit 8a411c8d25.
* Always use "/system" to interact with the frontend and replace it
with the detected path before taking actions.
* Don't replace the pretty display name and backup name set during
processing fstab after wipe. This improves UX and ensures that the
system backup is always named system.ext4.win despite the actual
mount point is /system_root so TWRP is able to recover either SAR or
non-SAR backups.
Change-Id: Ie2594d2678d0c75ce25c0d1087d47b035b3f10e9
This allows flame to boot TWRP. Still will need to work on
super partition for vendor and system access.
The plan will be to cherry-pick any updates to android-9.0
through gerrit.twrp.me to this branch as a WIP.
Set TW_INCLUDE_REPACKTOOLS := true
Must also have:
AB_OTA_UPDATER := true
Use magiskboot and provide GUI options to allow users to repack
their existing boot image to install TWRP (or kernels) so we can
stop having to provide installation zips for AB devices. There is
also an option to try to fix a recovery bootloop if the kernel
has been patched to always boot the ramdisk for root, etc.
You will need to pull the below repo into external/magisk-prebuilt
https://github.com/TeamWin/external_magisk-prebuilt
Change-Id: I74196cc6f095a7576d61886dc96cbc18deba9b04
Edl mode is available only on qualcomm devices and it used to fully
restore the bricked devices. I made the button available only if
TW_HAS_EDL_MODE := true like the download button. I set the edl
button to the right of the download button, so devices can support
edl button and download button. I also added the translation for
all languages.
Change-Id: I69d1058b8c050b722395c7b3da6dce1ccfbe7a91
This patchset updates all the places we touch cache on AB devices
and non AB devices so that we can write to the appropriate
location. AB devices removed the cache partition and moved it to
/data/cache.
Change-Id: I485ec205a604f1f07ceb7700ae9c4e720fd55c3e
instead of hard-coded /system path
I updated most of the references I found,
but there might be more
For devices that have to mount system at /system_root,
this allows system to be bind mounted to /system
and detected properly by TWRP
Change-Id: I9f142fd8cec392f5b88e95476258dab9c21a9aac
Decrypting userdata is not needed when installing zips if we have
a map of blocks to read, so skip the decryption. This allows to
install zips with no user interaction and, more importantly, it
allows to install zips on devices where TWRP can't properly decrypt
userdata.
Remove also the unneeded Mount_All_Storage() call, Install_Command()
already mounts the needed partition.
Change-Id: I91c69f84ecc2fe41c9567c40649e501af1cfb64a
Restore adb backup files that TWRP made to your PC.
Put files in your backup directory to see them.
e.g. /sdcard/TWRP/BACKUPS/<sn>
Change-Id: I2c57970d77b64c39a302159041456e761c185259
This patch is to refactor twrpDigest using polymorphism
and inheritance to use the same call patterns for creating and
reading a digest. Now a library.
Use SHA2 from libcrypto. SHA2 is default if device has libcrypto.
Change string MD5 everywhere to use digest or Digest instead. Updated
string tags to digest. Translation will be required.
Switch out digest code into a driver class from partitionmanager.
SHA2 is better for digest creation due to decreased collision space
compared to MD5 and SHA1.
See https://en.wikipedia.org/wiki/SHA-2
Change-Id: I74b5546789990b12aa4ce2e389d25f80a3fe213f
Set Backup_FileName on adb backup to fix restore.
Set read_from_adb after EOF to return properly
from newer adb client prompt.
Create setter and getter for Backup_FileName
for openrecoveryscript.cpp which is not a
friend class.
Fix condition for twrpTar::Get_Size() and adb backup.
Change-Id: I7eb8168fa3416366b996e220cecbc0e1bcec5e8e
The PartitionSettings struct contains some data elements that are duplicates
of data elements in the TWPartition class that is contained within the
PartitionsSettings.Part element. We will eliminate this duplication to help
reduce the chances for programming bugs.
Specifically, this fixes problems where the current file system does not
match the backed up file system.
Change-Id: I02f236e72093362050556a2e53a09d1dbb9a269d
Functionality for client side to backup
tar and image streams over adbd to the client under backup.ab.
Using adb backup on the client side you can backup the partitions
TWRP knows about.
On the client side you can do the following:
adb backup -f <filename> --twrp <options> where options are
--compress: compress data
system: backup system
cache: backup cache
data: backup data
boot: backup boot
etc for each partition.
You can string multiple options,
i.e. adb backup -f <filename> --twrp --compress cache system data
adb backup in TWRP will take any option corresponding
to TWRP fstab partitions, e.g. efs boot as well.
If you do not specify the filename with the -f option,
adb will backup your data to a filename backup.ab on the client.
You can then rename the file and encrypt it with desktop tools.
If you don't want to use command line arguments:
adb backup --twrp
will bring up the gui and allow you to choose partitions
from the backup page.
To restore the backup use the following convention:
adb restore <filename>
Structures are used to store metadata in binary inside
of the file itself. If the metadata structure is modified,
update the adb version so that it will invalidate older
backups and not cause issues on restore. When restoring,
we currently do not support picking specific partitions.
It's all or nothing.
Change-Id: Idb92c37fc9801dc8d89ed2a4570e9d12e76facf8
Fix permissions rarely fixed anything on more recent versions of
Android and usually made things worse. Instead we will replace it
with a more dumbed down option that should fix contexts on
/data/media with a few improvements to ensure that contexts get
fixed for multiple users and on adopted storage.
Change-Id: If5523781936a0b04196e2ad871cae767ebae2583
* Find and rename/remove duplicate string variable names
* Add missing string variables to en language file
* Fix display of some strings missing @ in front of variable name
* Fix several %s --> {1}
* Be consistent in usage of cancelled vs. canceled (both spellings
acceptable)
Tip for finding strings missing from language files:
1) Find all messages:
egrep -hr "gui_msg.+=" > /tmp/msgs.txt
2) Regex replace to trim them down
WHAT: ^\s+gui_msg(?:[^"]+)"([a-zA-Z0-9_]+)=([^"]+).+
WITH: $1
Note that $2 can be used to retain the message
3) Find missing strings:
for i in $(cat /tmp/msgs.txt); do
if ! grep -q $i gui/theme/common/languages/en.xml; then
echo $i;
fi
done
Change-Id: Ic193162e4b5468bf027472928a370be39840ea1d
Somewhat surprisingly, Recursive_Mkdir(TWRES "customlanguages")
did not create the "customlanguages" directory because it expected
a trailing slash. Fixed by rewriting the loop to be more like
Create_Dir_Recursive.
Also fixed error handling for the final directory, and fixed incorrect
return value handling for "mkdir" ORS command.
Change-Id: I1ab418ddda695cbb595a9db2817f00fc7b171f51
- CLI commands run in a threaded action "twcmd"
- Console is displayed via "singleaction_page"
- move ORS execution code from GUI action to OpenRecoveryScript class
- remove unused function gui_changePackage
- don't change PageManager package in home action
- fix that /tmp/openrecoveryscript was not deleted after execution
Change-Id: Ic688c0b04647ce09e9db979b0bc5123f47cf4f70
This is similar to https://gerrit.omnirom.org/#/c/14014
A lot of the features built in the older patch set have been split
out into separate patches, most of which have already been merged.
The remaining functionality here should all be directly related to
language selection and loading. We always load English as a base
before loading other languages over the top of the base. The idea
is that if another language is missing a translation, then we will
still display the English.
Maybe still to do: read the /cache/recovery/last_locale file and
load a language based on that. For me, this file contains just:
en_US
We probably won't bother with region specific translations so we
would have to look at either trimming off the _US or using some
other method like perhaps a symlink or a combination of the two.
Thanks to _that for twmsg.cpp class
Change-Id: I9647a22e47883a3ddd2de1da51f64aab7c328f74
Fix factory reset now properly formats data as expected
Change text for ORS processing
Disable system read only check, SuperSU, and patch system
Stop copying fstab and version to cache
Change-Id: I20f5cae390afbb8d2d88e01b8d9b9bf4ff0fdea1
AOSP started using the @ special character to pass to sysMapFile
to indicate that the zip file is actually mapped to unused blocks
on the data partition. Allow TWRP to do the same.
Change-Id: I5bf1355a5462588086401b02de1b17ab88ed3bcd
Also eliminate the mostly similar runPage function in favor of
using a single runPages function to avoid code duplication.
Change-Id: I46ef414beb4009fee16d4de13d8a5ab2b9678409
- "Cancel" button handling requires another thread
- simplify handling of child pid
- merge duplicated code for reinjecting TWRP after installation
- fix error that showed on host PC after sideload finished
- fix problem where adbd sometimes does not stop correctly
Change-Id: I536877f024b606756c6a3289c6ddfdba423a60d6
TWFunc::Get_Path() returns a path with a trailing slash and the substr
method is returning a string with a leading slash, so we don't need to
specify additional slashes for wholePath in Locate_Zip_File().
Also, put 'value' readout to log on its own line if it exists.
Change-Id: I2a4db6dbde5552f5a803eabb0599fd983d683fca
Allows sending openrecoveryscript commands to TWRP via shell.
This may be handy for visually impaired users, for various one
click utilities to drive TWRP commands from a computer, for using
TWRP when a catastrophic hardware failure like a shattered screen
prevents you from being able to use touch, or even on devices like
a TV stick where touch and USB mouse input is unavailable.
This patch also includes a few minor changes to openrecoveryscript
including proper support for rebooting via the script and for
decrypting the device via the command line.
Change-Id: I796ad168efdd2da9c25334ac93d1079daaa7b0bc
Grab a vector of storage locations and iterate through them for
searching for zips and restore folders.
Change-Id: Ia045b1e15ac3701132d61fe9f5847da5785a9b4e
