As of C++ specification size_type erase( const key_type& key );
removes the element (if one exists). There is no need to perform
the check twice.
Change-Id: I4b057c08526abc7c2a483a60f9e166e4d8f56a74
It's valid to provide only 1 argument to apply_patch_check(). We
shouldn't fail the argument parsing.
Bug: 36541737
Test: recovery_component_test passes.
Test: recovery_component_test captures the failure without the fix.
Test: The previously failed update applies successfully.
Change-Id: Iee4c54ed33b877fc4885945b085341ec5c64f663
And switch them to std::vector & std::unique_ptr
Bug: 32117870
Test: recovery tests passed on sailfish
Change-Id: I5a45951c4bdf895be311d6d760e52e7a1b0798c3
Our updater created the stashes with root permission. This causes an
access denial when the RecoverySystem service tries to clean up these
blocks after a failing update. As a result, the subsequent OTA updates
may fail due to insufficient cache space.
Bug: 36457133
Test: stashed blocks cleaned successfully after reboot
Change-Id: If0ca99638cdfa1033646f29d9cc92b5ff1bacac1
Since this was putting the intermediate file in obj/PACKAGING, every
installclean was removing it and triggering updater to rebuild. Instead,
use the standard generated-sources-dir. The dep file can also be removed
now that ninja will re-run the generator if the command line changes.
Test: m -j updater; m installclean; m -j updater
Test: Only change to aosp_fugu updater before/after is the debug info
Change-Id: I20928bd2049d4a3d4e21f83fd64d16cfdc541958
This reverts commit 90eff6a340.
Also fix the bug where stashed blocks are not freed.
Bug: 21124445
Test: Previous failed update succeeded on bullhead
Change-Id: I23d232331a2beb51b6dcc82c957c87bc247d0268
Test: Apply an incremental BBOTA package with the new updater.
Test: Resume an interrupted BBOTA (so it cleans up the partial stash).
Change-Id: I620cc57ee6366845bcffbc19210f7a01e2196052
This reverts commit bb0cd75a0e.
Broke the 'free' command that deletes a stash.
Bug: 36242722
Test: The previously failed incremental applies successfully.
Change-Id: I1237cb0a33adfbeea57e0465b629704862ba13aa
It will be helpful for debug if we know which blocks are corrupted after
a verification failure. This CL prints the SHA-1 for each source block
in a transfer command if these blocks don't have an expected hash. And
along with the correct SHA-1, we will catch the corrupted blocks.
Bug: 21124445
Test: Printed the mismatched SHA-1 for bullhead during an update.
Change-Id: I683d4bdaf9a335035045b3f532b3a265b2fcbbfc
This CL removes the updater support for delete(), symlink(), rename(),
set_metadata() and set_metadata_recursive(). Such functions have been
removed from the generation script in commit
f388104eaacd05cfa075d6478369e1d0df5ddbf3 (platform/build).
Note: This CL also removes delete_recursive() which seems to have never
been supported in generation script.
Bug: 35853185
Test: recovery_component_test passes.
Change-Id: I51e1ec946fa73761118fa1eaa082423df6d588e9
-1 is not a valid exit status.
Also replace a few exit(1) with exit(EXIT_FAILURE).
Test: mmma bootable/recovery
Change-Id: I4596c8328b770bf95acccc06a4401bd5cabd4bfd
Now ApplyBSDiffPatch() will stream the output to sink as we go instead
of sinking everything at the end.
Test: recovery_host_test
Bug: 26982501
Change-Id: I05b6ed40d45e4b1b19ae72784cf705b731b976e3
Currently the ui_print command between the recovery and updater doesn't
append newline. Updater has to send an extra "ui_print" command without
any argument to get the line break. This looks unnecessary. And not all
the callers (including the ones in bootable/recovery) are following this
protocol when sending the ui_print command.
This CL simplifies the protocol to always print with a newline for
ui_print command. When updating from an old recovery with the new
updater, all the ui_print'd strings would appear in one line as a side
effect. But a) it would only affect the text-mode UI, which won't be
shown to users; b) log files won't be affected.
Bug: 32305035
Test: Apply an update with the new updater on top of an old and new
recovery image respectively.
Change-Id: I305a0ffc6f180daf60919cf99d24d1495d68749b
We could inject I/O faults during an OTA update for test purpose. But we
should skip the injection if the update is an retry. Otherwise the
update test will simply keeps failing.
Bug: 34159970
Test: Apply the same package on angler and the update succeeds on the 2nd try.
Change-Id: Id274e5475e3bc8d25d50a8cf61a77d2e32c569d6
Returning the parsed RangeSet directly (as opposed to using some pointer
parameter) to make the code cleaner.
Test: Apply an incremental with the new updater.
Change-Id: I8c99e701f189eb6a3eacc0d647e5a3a85fbeb3eb
Change the stash size computation from int to size_t.
Test: Apply an incremental BBOTA with the new updater.
Change-Id: Ib45b71b826fec6aa0ffafc67c17735825634eae0
We should always use unique_fd or unique_file to hold the FD or FILE*
pointer when opening via ota_(f)open functions.
This CL avoids accidentally closing raw FDs or FILE* pointers that are
managed by unique_fd/unique_file.
Test: recovery_component_test passes.
Change-Id: If58eb8b5c5da507563f85efd5d56276472a1c957
Add read_bootloader_message_from() and write_bootloader_message_to() to
allow specifying the BCB device (/misc).
Also add testcases for set_stage() and get_stage().
Test: recovery_component_test passes.
Test: Build a recovery image and apply a two-step OTA package.
Change-Id: If5ab06a1aaaea168d2a9e5dd63c07c0a3190e4ae
write_value(value, filename) writes 'value' to 'filename'. It can be
used to tune device settings when applying an OTA package. For example,
write_value("960000", "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq").
Bug: 32463933
Test: recovery_component_test passes.
Test: Apply an OTA package that contains a call to write_value(), and
check the result.
Change-Id: Ib009ecb8a45a94353f10c59e2383fe1f49796e35
'bool success = ExtractEntryToFile()' gives opposite result. Fix the
issue and add testcases.
Change the one-argument version of package_extract_file() to explicitly
abort for non-existent zip entry. Note that this is NOT changing the
behavior. Prior to this CL, it aborts from Evaluate() function, by
giving a general cause code. Now it returns kPackageExtractFileFailure.
BUg: 32903624
Test: recovery_component_test works.
Change-Id: I7a273e9c0d9aaaf8c472b2c778f7b8d90362c24f
Clean up SymlinkFn() a bit. Also clean up the temp files created when
running the tests; otherwise non-empty TemporaryDir won't be removed.
Test: recovery_component_test passes.
Change-Id: Id3844abebd168c40125c4dcec54e6ef680a83c3a
ReadArgs will switch to using std::string and std::unique_ptr. Also
cleanup the callers.
Test: mma & component test passed.
Change-Id: I4724406ae6c0c134a27bbd1cdd24ad5d343b2a3b
Clean up the duplicated codes that handle the zip files in
bootable/recovery; and rename the library of the remaining
utility functions to libotautil.
Test: Update package installed successfully on angler.
Bug: 19472796
Change-Id: Iea8962fcf3004473cb0322b6bb3a9ea3ca7f679e
Changing the field of 'Value' in edify to std::string from char*.
Meanwhile cleaning up the users of 'Value' and switching them to
cpp style.
Test: compontent tests passed.
Bug: 31713288
Change-Id: Iec5a7d601b1e4ca40935bf1c70d325dafecec235
- Remove dead declarations in expr.h: SetError(), GetError(),
ClearError().
- Remove the declaration of Build() out of expr.h.
- Use std::unordered_map to implement RegisterFunction() and
FindFunction(); kill FinishRegistration().
- Add a testcase for calling unknown functions.
Test: mmma bootable/recovery; recovery_component_test passes.
Change-Id: I9af6825ae677f92b22d716a4a5682f58522af03b
Also add a testcase for sha1_check().
Test: mmma bootable/recovery; recovery_component_test passes.
Change-Id: I4d06d551a771aec84e460148544f68b247a7e721
So that we can write native tests for updater functions. This CL adds a
testcase for getprop() function.
Test: mmma bootable/recovery; Run recovery_component_test on device.
Change-Id: Iff4c1ff63c5c71aded2f9686fed6b71cc298c228
This way we kill a few strdup() and free() calls.
Test: 1. recovery_component_test still passes;
2. Applying an update with the new updater works;
3. The error code in a script with abort("E310: xyz") is recorded into
last_install correctly.
Change-Id: Ibda4da5937346e058a0d7cc81764d6f02920010a
Tao Bao
Mikhail Lappo
Tianjie Xu
Dan Willemsen
Sen Jiang
Alex Deymo