Now it's less beneficial to inject I/O faults since we don't see many of
them. Remove the library that mocks I/O failures. And switch to android::base
I/O when possible.
Bug: 113032079
Test: unit tests pass
Change-Id: I9f2a92b7ba80f4da6ff9e2abc27f2680138f942c
They serve the same purpose as {boot,recovery}.img, except that they're
not structured to be imgdiff'd. Remove the two files and replace all the
uses with {boot,recovery}.img instead.
Bug: 110106408
Test: Run recovery_{unit,component}_test on marlin.
Change-Id: I8e71187d5b0c142ad932f33717f6fae364b43abc
This would be the top-level class that represents and holds the info
parsed from a transfer list file.
Bug: 112151972
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I83b54df9d1411542eeeb8ef4a2db167e97f989c3
This file was somehow missed when converting from Android.mk to
Android.bp. This CL addresses the issue by picking up all the .cpp files
in the test source dir.
Test: Run recovery_{unit,component}_test on marlin. Check the reported
number of tests (94 for unit test and 157 for component test).
Change-Id: I50435b07fcb8602ef7b3f7e7d3a69e10b6a5932d
Also separate libupdater_defaults out to be shareable.
It turns out the `data` property in `cc_test` doesn't follow symlinks as
LOCAL_TEST_DATA does in Android.mk. This CL creates a filegroup in
top-level Android.bp in order to pick up the testdata for ResourcesTest.
Test: `mmma -j bootable/recovery` with aosp_marlin-userdebug
Test: Run recovery_{unit,component,manual}_test on marlin.
Test: Run recovery_host_test.
Change-Id: I4532ab25aeb83c0b0baa8051d5fe34ba7b910a35
Bug: 112494634
Test: Build and boot into recovery image on taimen. Verify that
`Apply updates from ADB` keeps working.
Test: Run recovery_component_test on marlin.
Change-Id: I9ee8834053fda79a4fd77bfa83eab3cc51a90dff
Add hash_tree_info to represent the hash tree computation arguments in
the transfer commands 'compute_hash_tree'. Also add its parsing code in
the Command class.
Bug: 25170618
Test: unit tests pass
Change-Id: Ie8607968377968e8fb3e58d1af0b8ca315e145be
recovery is_battery_ok function uses get_health_service(),
which calls IHealth::getService("default") then
IHealth::getService("backup").
- An OEM can provide the default instance by installing
android.hardware.health@2.0-impl-<device>.so to recovery
partition.
- If that's not found, the "backup" instance is provided
to the recovery partition by default.
Test: call is_battery_ok() in recovery, successfully
get battery information.
Bug: 80132328
Change-Id: Ibfee80636325a07bc20b24d044d007a60b3dd7c2
This relands the previously reverted CL in commit
c70446ce7b ("Build and use minadbd as a
shared library."). `recovery` has been built with Soong, so the previous
concern (unintentionally installing `libminadbd_services.so` to normal
system image) no longer holds.
Note that `reocvery` can't use `libminadbd_services.a`, as functions
like `daemon_service_to_fd()` (needed by `libadbd.so`) won't be linked
into `recovery`.
This CL moves the dependency of `libminadbd_services` from `librecovery`
into `recovery`, as only the latter actually relies on it (via
`recovery_main.cpp`). Note that we no longer need to list the transitive
dependency on `libadbd` or `libasyncio`.
Bug: 112494634
Test: `mmma -j bootable/recovery`
Test: Build and boot into recovery with aosp_taimen-userdebug. Verify that
sideloading keeps working.
Test: `build/soong/build_test.bash --dist`
Change-Id: Ic086470b86d6770bede317e0f5534f608fa7b7d2
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I2617b87d13c585addf0ed2fbae8c3ce443ea7200
It doesn't change the functionality of the test, but allows easier
conversion to Soong.
Test: Run recovery_component_test on marlin.
Change-Id: Ic7419dc86c6b220531ae44e49ab4657394a5d7fa
This reverts commit 4fd4f89591.
The reverted CL has a side effect that unintentionally installs
a copy of libminadbd_services.so to the system image. This breaks the
check with `build/soong/build_test.bash --dist` which detects and
prevents vendor modules from installing files to the system image.
Prior to fully converting `recovery` to be built with Soong, we have to
statically link recovery-specific modules into `recovery`.
Bug: 110380063
Test: `m -j bootimage` with aosp_marlin-userdebug
Test: Run minadbd_test on marlin.
Test: Boot into recovery and verify that sideloading still works.
Test: `build/soong/build_test.bash --dist`
Change-Id: I290d55c82e17aa60a5afdf2ff7f896afc4dae8b3
The former `minadbd` module is now built as a shared library
(`libminadbd_services.so`) that serves sideloading under recovery, with
a dynamic dependency on `libadbd.so`.
This allows sharing and reusing libadbd code on device (both of `adbd`
and `recovery` now uses `libadbd.so`). As a result, it reduces the size
of `recovery` binary from 1407360-byte to (1272880 + 33032)-byte
(aosp_marlin-userdebug).
Bug: 78793464
Test: `m -j bootimage` with aosp_marlin-userdebug
Test: Run minadbd_test on marlin.
Test: Boot into recovery and verify that sideloading still works.
Change-Id: I6c2bc3d351d5af71220a9b9f956c8c039e52c781
We used to statically link the device-specific recovery UI extension
(`TARGET_RECOVERY_UI_LIB`) into `recovery`. Such a logic can't be easily
migrated to Soong, as modules specified by `TARGET_RECOVERY_UI_LIB` may
not be built with Soong.
Instead of porting all the device-specific codes over, this CL builds
and installs the UI lib as a shared library with Android.mk. `recovery`
dlopen(3)'s and dlsym(3)'s `make_device` to invoke the device-specific
UI lib on start.
Note that in order to make dlopen(3) actually working, we have to switch
`recovery` to be dynamically linked (we will make the move later
anyway).
Bug: 110380063
Test: Build and boot into marlin recovery image. Check that
device-specific recovery UI is successfully loaded.
Change-Id: Ia9861c7559a95f3f50676534540c0cb87cae4574
The new command is part of the transfer.list and allows us to compute the hash
tree on non-ab devices.
The required arguments for the hash_tree computation are:
hash_tree_ranges
source_ranges
hash_algorithm
salt_hex
root_hash
Bug: 25170618
Test: unit tests pass; run simulator with compute_hash_tree
Change-Id: I8ff0d582cc8adabb8a060db7845f38b35b28e62c
Normally calling a UI method will block
indefinitely until the UI is actually
used. This creates a method to interrupt
the UI, causing waitKey to return -2. This
in turn, will cause ShowMenu to return -2.
This allows switching between recovery and
fastbootd via usb commands.
Test: adb shell /data/nativetest64/recovery_unit_test/recovery_unit_test
Bug: 78793464
Change-Id: I4c6c9aa18d79070877841a5c9818acf723fa6096
Switching to the protobuf format helps to make the care_map more
extensible. As we have such plans in the future, add the support to
parse the protobuf message in the update_verifier.
Bug: 77867897
Test: unit tests pass, update_verifier successfully verifies a care_map.pb
Change-Id: I9fe83cb4dd3cc8d6fd0260f2a47338fe142d3938
This applies to the standalone applypatch executable
(/system/bin/applypatch on device). This executable is only used when
installing (via patching or flashing) a recovery image on non-A/B
device.
This CL removes the support for patching non-eMMC targets from
applypatch that has been deprecated as part of file-based OTA. For
patching eMMC targets, it also drops the support for accepting multiple
patches (not useful, since the source file must be fixed).
This CL needs the matching change in the same topic, which writes the
script of "/system/bin/install-recovery.sh". Note that this CL doesn't
chanage the applypatch API signatures, in order to minimize the CL size.
*BEFORE*
usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...]
or /system/bin/applypatch -c <file> [<sha1> ...]
or /system/bin/applypatch -l
Filenames may be of the form
EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:...
to specify reading from or writing to an EMMC partition.
*AFTER*
Usage:
check mode
applypatch --check EMMC:<target-file>:<target-size>:<target-sha1>
flash mode
applypatch --flash <source-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
patch mode
applypatch [--bonus <bonus-file>]
--patch <patch-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
--source EMMC:<source-file>:<source-size>:<source-sha1>
show license
applypatch --license
Bug: 110106408
Test: Run recovery_component_test and recovery_unit_test on marlin.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh.
Verify that it installs recovery image successfully.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh in
flashing mode. Verify that it installs recovery image successfully.
Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
The getopt_long(3) implementation in Android (upstream freebsd) expects
a null-terminated array while parsing long options with required args.
if (long_options[match].has_arg == required_argument) {
optarg = nargv[optind++];
}
...
if (long_options[match].has_arg == required_argument && optarg == NULL) {
return (BADARG);
}
This seems to make sense in practice, as getopt(3) takes the first two
arguments of argc and argv that are "as passed to the main() function on
program invocation", and both of C and C++ spec say "the value of
argv[argc] shall be 0".
Prior to the CL, we may run into undefined behavior on malformed input
command line (e.g. missing arg for an option that requires one). This CL
fixes the issue by always appending a nullptr to the argument list (but
without counting that into argc).
Test: Build and boot into recovery with commands.
Change-Id: Ic6c37548f4db2f30aeabd40f387ca916eeca5392
TemporaryDir only deletes empty dirs (not done by its dtor because it
tries to keep the temporary files available on error exit).
Also change FreeCacheTest::MockFreeSpaceChecker to be static.
Test: Run recovery_unit_test on marlin. Check /data/local/tmp post-run.
Change-Id: I1bd54eb840e3094b4f22ee84c059eec2998773bf
Prior to this CL, FreeSpaceForFile() was returning `size_t`, which may
overflow on ILP32 when called on a partition with 4GiB+ free space.
Additionally, it was returning static_cast<size_t>(-1) on error, but the
caller in freecache.cpp didn't check for that.
This CL changes its return type to `int64_t`, and moves the function
into freecache.cpp since there's no external caller.
Test: Run recovery_unit_test on marlin.
Test: Code search shows no external user of FreeSpaceForFile().
Change-Id: I00f501a057726e1f1ab69f367c46c77b30f2d774
We already know the flakiness happens in bspatch, and the issue is
tracked in b/80193170.
Bug: 67849209
Test: unit tests pass
Change-Id: Ib4772b8f2f0225125096fe7407d083b5bb542cfb
It used to return a Value blob to be consumed by sha1_check() (which has
been deprecated). Currently there's no other generic updater function
that works with BLOB Values. This CL changes read_file() to return a
string Value to make it more useful (e.g. allowing equality check).
Test: Run recovery_component_test and recovery_unit_test on marlin.
Change-Id: Iba986ba649030112babefe898f26aa9ffe69eeb7
