Also simplify the helper function expect() in {edify,updater}_test.cpp.
Test: Run recovery_component_test on marlin.
Change-Id: If54febba4b5013f6d71546318a1ca6b635204ac8
Test: mmma -j bootable/recovery
Test: Run recovery_component_test and recovery_unit_test on marlin.
Change-Id: I4b240e3e771c387b9694be9c0f2f74e0265ab4cb
Also fix an error-pone behavior in previous code when verifying an eMMC
target. As long as it loads the partition content successfully according
to the SHAs embedded in the filename, it shouldn't further check against
the SHAs given in the second argument. Because the loaded contents
relate to a specific partition size.
For example:
apply_patch_check(
"EMMC:/boot.img:src_size:src_hash:tgt_size:tgt_hash",
"src_hash");
Assume "/boot.img" already has the desired hash of "tgt_hash", the
previous code would give wrong verification result. The issue can be
addressed by additionally listing "tgt_hash" as one of the desired SHAs
(or by applying this CL).
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I8daafdbecd083f687e24d563ab089caa25667633
The matching edify function has been removed from EdifyGenerator [1]. In
theory device-specific releasetools script may still use this function,
but it no longer looks useful. Because a) we should use range_sha1()
when asserting the SHA-1 hash of a block device; b) we should look into
the contents when asserting a text file.
[1] https://android-review.googlesource.com/c/platform/build/+/714104
Test: Run recovery_component_test on marlin.
Test: Code search shows no active user.
Change-Id: Id39439101534fb89cf8c5cea80a4b758c8a1a60d
This will be used for testing purpose only, replacing the previously
used "fail", to intentionally abort an update.
As we're separating the logic between commands parsing and execution,
"abort" needs to be considered as a valid command during the parsing.
Test: recovery_unit_test and recovery_component_test on marlin.
Change-Id: I47c41c423e62c41cc8515fd92f3c5959be08da02
... into unit/applypatch_test.cpp. And rename the file to
component/applypatch_modes_test.cpp.
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: Ic23c4f054baa2fa0d5e8ea2fcffd22572f1f112e
Additionally checks for excess args when parsing ERASE, FREE, NEW, STASH
and ZERO. Note that the check for MOVE, BSDIFF, IMGDIFF has been covered
in Command::ParseTargetInfoAndSourceInfo.
Test: Run recovery_unit_test on marlin.
Change-Id: Ic8bc9b7a8dcf98f1f8db2e259607564508726857
The added codes are not used in the updater yet. The switch will happen
in subsequent CLs.
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I1ae8a233280f02c2171b43ef028bdccdacb39c59
This shortens the gap between A/B and non-A/B builds, by replacing the
dependency on build-time flag with runtime detection instead. It also
allows building and testing both paths regardless of the target OTA
type.
The size increase to /sbin/recovery looks negligible (< 0.01%).
- marlin: increased from 2084928 to 2085024;
- angler: increased from 2084776 to 2084896.
Test: Run recovery_component_test on angler and marlin.
Test: Sideload an A/B OTA package on marlin.
Test: Sideload a non-A/B OTA package on angler.
Change-Id: I1d927d1ede9713fb42f73b4fe324aa5705ee6f99
It addresses the ScreenRecoveryUITest failures on gce targets which
don't have any graphics backend. Probing for all backend devices in
tests could work, but would duplicate codes. This CL relies on the
result of gr_init().
As a side effect, it may give false negatives if gr_init() is supposed
to work but silently broken. But such issues are beyond
ScreenRecoveryUITest's concern, which should be captured by the tests
for minui or graphics backends instead.
Fixes: 79616356
Test: Run recovery_unit_test on marlin.
Test: Run recovery_unit_test on gce.
Change-Id: I121aacc61c8a614447509506057ecfd8d86163e4
The threads in RecoveryUI only get initialized if their Init()s finish
successfully.
Test: recovery_unit_test on marlin.
Change-Id: Ic4b62300a3cbd47887d9f4a90dc26f8a7deab616
As warned below (while running the test), the default death test style
(i.e. "fast") doesn't work well in a threaded context, which causes test
flakiness (timeout or early exit).
[WARNING] external/googletest/googletest/src/gtest-death-test.cc:836:: Death tests use fork(), which is unsafe particularly in a threaded context. For this test, Google Test detected 3 threads.
This CL specifies the death test styles to be "threadsafe" for the
following death tests.
- RangeSetTest.GetBlockNumber
- RangeSetTest.file_range
- ScreenRecoveryUITest.LoadAnimation_MissingAnimation
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin. Test passes and the above
warning is gone.
Change-Id: I245bbc09286702d5cb326f878c4391e842b66cc5
This is a stress test that instantiates multiple testcases that
interrupt a BBOTA update at every transfer command. Each testcase
asserts the last_command_file after the interruption, verifies the
update resumability, then resumes the update and asserts the updated
image.
The transfer list in the testcase covers most of the transfer commands
(stash/free/move/bsdiff/zero/new), as well as some special pattern like
having duplicate stash ids.
This CL also addresses one issue in the updater code, by resetting the
stash_map before each run. The stash map should be valid only per
block_image_verify/block_image_update run. Having leftover may cause
issue in subsequent runs, in particular when calling block_image_verify
after a previous run of block_image_{update,verify}.
Test: Run recovery_component_test on marlin.
Change-Id: I6f9a0368d194a754ce41a9c9819c6d5be2657248
Move the commands map parsing out of PerformBlockImageUpdate(), as this
can be done more easily by the caller.
The goal (not done in this CL) is to decouple command parsing logic from
the performers. This allows (a) focusing on the command logic in the
performer; and (b) extending BBOTA commands syntax separately.
Test: Run recovery_unit_test and recovery_component_test.
Change-Id: Ife202398a7660b152d84a3ba17b90f93d19c55f2
Otherwise tests may interfere with each other by using the same / default
location.
Test: Run recovery_component_test on marlin.
Change-Id: I6b0455489f2fdce819009964dd92bfd9bfeb06ef
The imgpatch will fail on empty deflates because the bspatch won't call
the sink function if the target length is zero.
Instead of compressing an empty string, it's cleaner to not generate such
empty deflate chunks in the patch. Therefore, we can just convert the
chunk type to raw if the target length is smaller than the patch data.
Also adjust some unit tests and add the testdata gzipped_source &
gzipped_target. These two files are ~1K each and are generated by
gzipping two slightly different regular files.
Bug: 79265132
Test: unit tests pass, imgpatch applys successfully on the given src/tgt
Change-Id: I6bfff3251918137f6762a6f9e9551642371a1124
Move the common codes into RunBlockImageUpdate(). Also clean up the
partition updated marker after running each test.
Test: Run recovery_component_test on marlin.
Change-Id: Id4302e4da4c664231b737a1e83d2e164ef58ed97
Test: Build and boot into recovery on walleye. Check the long press
detection; `Run graphics test`.
Change-Id: Ic3e9b0652fc3ff6fb3ad118df5ebb9bb4abda2cd
Move most source files into librecovery so they become testable. Only
recovery_main.cpp and logging.cpp are built into recovery module, as
they perform one-time setup (e.g. setting up logger).
Test: `mmma -j bootable/recovery` with
aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug
Test: recovery_host_test; recovery_unit_test; recovery_component_test;
recovery_manual_test
Test: Build and boot into recovery image on angler.
Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
Merged-In: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
Move most source files into librecovery so they become testable. Only
recovery_main.cpp and logging.cpp are built into recovery module, as
they perform one-time setup (e.g. setting up logger).
Test: `mmma -j bootable/recovery` with
aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug
Test: recovery_host_test; recovery_unit_test; recovery_component_test;
recovery_manual_test
Test: Build and boot into recovery image on angler.
Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
(cherry picked from commit bf4c006d7bc8a4517c82399bbffd9cb09971c0b4)
Reorder librecovery and librecovery_ui, so that librecovery stays closer
to recovery (in preparation for later changes that move more files
between the two). For the libraries in LOCAL_STATIC_LIBRARIES, reorder
them based on the dependency - local modules coming first, with external
libraries near the end. Sort the local / external modules, unless a
specific order is needed.
In tests/Android.mk, split the monolithic list of LOCAL_STATIC_LIBRARIES
based on modules. This makes adding / finding libraries easier.
There's no functionality in this CL.
Test: mmma -j bootable/recovery
Change-Id: I6836be574df565001ae9cd3d466a2b6460d90d08
The CL in [1] moved android.os.RecoverySystem to send the locale
argument in well-formed BCP 47 language tags (e.g. "en-US" instead of
"en_US"), with the matching changes to recovery code in [2]. However,
the one in ScreenRecoveryUI::SetLocale() was missed, which broke RTL
locale detection when using new format.
[1] commit 38715228 in platform/frameworks/base
[2] commit 2078b22e in platform/bootable/recovery
Test: Set the locale to "ar-EG". `Run graphics test` under recovery.
Check the progress bar.
Test: Run recovery_unit_test on marlin.
Change-Id: I7c7f5e0725bfb096109c7192c19f3f008e8e47e3
In order to support that, this CL adds Paths::set_resource_dir() to
override the default resource dir ("/res/images/") that's only available
under recovery. Note that since there're external modules depending on
libminui, it adds a separate function of res_set_resource_dir(), instead
of requiring the dependency on libotautil for everyone.
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Change-Id: I0a7dcf4476808bea9e634eaffc9676f6cbaf92b7
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test on marlin.
Test: Build and boot into recovery image on angler. Check the UI that
shows menu ('View recovery log', 'Wipe data', 'Run locale test').
Test: Start recovery with '--prompt_and_wipe_data'. Check the UI.
Change-Id: If8a4209e0bb4ca64f719f9f9465d3b3589a69cdc
Tao Bao
Xin Li
Tianjie Xu